In several occasions it has been observed when the browser has evicted
eagerly cached assets from the cache and which can also not be found on the
server anymore. This can lead to broken state where only parts of the application
will load and others will fail.
This commit fixes this issue by checking for the missing asset in the cache
and on the server. If this condition is true, the broken client will be
notified about the current state through the `UnrecoverableStateError`.
Closes#36539
PR Close#36847
Previously, the condition to make the cache busted was executing although
the network request was successful. However, this is not valid. The cache
should only be marked as busted when the request failed. This commit fixes
the invalid condition.
PR Close#36847
The Chrome debugger is not able to render the syntax properly when the
code contains backticks. This is a known issue in Chrome and they have an
open [issue](https://bugs.chromium.org/p/chromium/issues/detail?id=659515) for that.
This commit adds the work-around to use double backslash with one
backtick ``\\` `` at the end of the line.
This can be reproduced by running the following command:
`yarn bazel test //packages/forms/test --config=debug`
When opening the chrome debugger tools, you should see the correct
code highlighting syntax.
PR Close#38332
Some ServiceWorker operations and methods require normalized URLs.
Previously, the generic `string` type was used.
This commit introduces a new `NormalizedUrl` type, a special kind of
`string`, to make this requirement explicit and use the type system to
enforce it.
PR Close#37922
In some cases, it is useful to use a relative base href in the app (e.g.
when an app has to be accessible on different URLs, such as on an
intranet and the internet - see #25055 for a related discussion).
Previously, the Angular ServiceWorker was not able to handle relative
base hrefs (for example when building the with `--base-href=./`).
This commit fixes this by normalizing all URLs from the ServiceWorker
configuration wrt the ServiceWorker's scope.
Fixes#25055
PR Close#37922
This is in preparation of enabling the ServiceWorker to handle
relative paths in `ngsw.json` (as discussed in #25055), which will
require normalizing URLs in other parts of the ServiceWorker.
PR Close#37922
The Angular ServiceWorker can serve requests to a special virtual path,
`ngsw/state`, showing [information about its internal state][1], which
can be useful for debugging.
Previously, this would only work if the ServiceWorker's [scope][2] was
the root directory (`/`). Otherwise, (e.g. when building the app with
`--baseHref=/some/path/`), the ServiceWorker would fail to detect a
request to `/some/path/ngsw/state` as matching `ngsw/state` and would
not serve it with the debugging information.
This commit fixes it by ensuring that the ServiceWorker's scope is taken
into account when detecting a request to `ngsw/state`.
[1]: https://angular.io/guide/service-worker-devops#locating-and-analyzing-debugging-information
[2]: https://developer.mozilla.org/en-US/docs/Web/API/ServiceWorkerRegistration/scopeFixes#30505
PR Close#37922
Refactors the `ng_rollup_bundle` rule to a macro that relies on
the `@bazel/rollup` package. This means that the rule no longer
deals with custom ESM5 flavour output, but rather only builds
prodmode ES2015 output. This matches the common build output
in Angular projects, and optimizations done in CLI where
ES2015 is the default optimization input.
The motiviation for this change is:
* Not duplicating rollup Bazel rules. Instead leveraging the official
rollup rule.
* Not dealing with a third TS output flavor in Bazel.The ESM5 flavour has the
potential of slowing down local development (as it requires compilation replaying)
* Updating the rule to be aligned with current CLI optimizations.
This also _fixes_ a bug that surfaced in the old rollup bundle rule.
Code that is unused, is not removed properly. The new rule fixes this by
setting the `toplevel` flag. This instructs terser to remove unused
definitions at top-level. This matches the optimization applied in CLI
projects. Notably the CLI doesn't need this flag, as code is always
wrapped by Webpack. Hence, the unused code eliding runs by default.
PR Close#37623
The default value was changed from `registerWhenStable` to
`registerWhenStable:30000` in 29e8a64cf0,
but the decumentation was not updated to reflect that.
This commit updates the documentation to mention the correct default
value.
PR Close#37555
**Problem**
After #31109 and #31865, it's still possible to get locked in state
`EXISTING_CLIENTS_ONLY`, without any possibility to get out (even by
pushing new updates on the server).
More specifically, if control doc `/latest` of `ngsw:/:db:control` once
gets a bad value, then the service worker will fail early, and won't be
able to overwrite `/latest` with new, valid values (the ones from future
updates).
For example, once in this state, URL `/ngsw/state` will show:
NGSW Debug Info:
Driver state: EXISTING_CLIENTS_ONLY (Degraded due to failed initialization: Invariant violated (initialize): latest hash 8b75… has no known manifest
Error: Invariant violated (initialize): latest hash 8b75… has no known manifest
at Driver.<anonymous> (https://my.app/ngsw-worker.js:2302:27)
at Generator.next (<anonymous>)
at fulfilled (https://my.app/ngsw-worker.js:175:62))
Latest manifest hash: 8b75…
Last update check: 22s971u
... with hash `8b75…` corresponding to no installed version.
**Solution**
Currently, when such a case happens, the service worker [simply fails
with an assertion][1]. Because this failure happens early, and is not
handled, the service worker is not able to update `/latest` to new
installed app versions.
I propose to detect this corrupted case (a `latest` hash that doesn't
match any installed version) a few lines above, so that the service
worker can correctly call its [already existing cleaning code][2].
[1]: https://github.com/angular/angular/blob/3569fdf/packages/service-worker/worker/src/driver.ts#L559-L563
[2]: https://github.com/angular/angular/blob/3569fdf/packages/service-worker/worker/src/driver.ts#L505-L519
This change successfully fixes the problem described above.
Unit test written with the help of George Kalpakas. Thank you!
PR Close#37453
Due to an outage with the proxy we rely on for publishing, we need
to temporarily directly publish to NPM using our own angular
credentials again.
PR Close#37378
Tslib version is bound to the TypeScript version used to compile the library. Thus, we shouldn't list `tslib` as a `peerDependencies`. This is because, a user can install libraries which have been compiled with older versions of TypeScript and thus require multiple `tslib` versions to be installed.
Reference: TOOL-1374 and TOOL-1375
Closes: #37188
PR Close#37198
We can remove all of the entry point resolution configuration from the package.json
in our source code as ng_package rule adds the properties automatically and correctly
configures them.
This change simplifies our code base but doesn't have any impact on the package.json
in the distributed npm_packages.
PR Close#36944
The Angular ServiceWorker always uses a copy of the request without
headers for caching assets (in order to avoid issues with opaque
responses). Therefore, it was previously not possible to retrieve
resources from the cache if the response contained [Vary](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Vary) headers.
In addition to that, `Vary` headers do not work in all browsers (or work
differently) and may not work as intended with ServiceWorker caches. See
[this article](https://www.smashingmagazine.com/2017/11/understanding-vary-header) and the linked resources for more info.
This commit avoids the aforementioned issues by making sure the Angular
ServiceWorker always sets the `ignoreVary` option passed to
[Cache#match()](https://developer.mozilla.org/en-US/docs/Web/API/Cache/match) to `true`. This allows the ServiceWorker to correctly
retrieve cached responses with `Vary` headers, which was previously not
possible.
Fixes#36638
BREAKING CHANGE:
Previously, [Vary](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Vary)
headers would be taken into account when retrieving resources from the
cache, completely preventing the retrieval of cached assets (due to
ServiceWorker implementation details) and leading to unpredictable
behavior due to inconsistent/buggy implementations in different
browsers.
Now, `Vary` headers are ignored when retrieving resources from the
ServiceWorker caches, which can result in resources being retrieved even
when their headers are different. If your application needs to
differentiate its responses based on request headers, please make sure
the Angular ServiceWorker is [configured](https://angular.io/guide/service-worker-config)
to avoid caching the affected resources.
PR Close#34663
Previously it was not possible to provide `CacheQueryOptions` ([MDN](https://developer.mozilla.org/en-US/docs/Web/API/Cache)) for querying the Cache.
This commit introduces a new parameter called `cacheQueryOptions` for `DataGroup` and `AssetGroup`.
Currently only `ignoreSearch` is supported as `ignoreVary` and `ignoreMethod` would require using
the complete Request object for matching which is not possible with the current implementation.
Closes#28443
PR Close#34663
1. update jasmine to 3.5
2. update @types/jasmine to 3.5
3. update @types/jasminewd2 to 2.0.8
Also fix several cases, the new jasmine 3 will help to create test cases correctly,
such as in the `jasmine 2.x` version, the following case will pass
```
expect(1 == 2);
```
But in jsamine 3, the case will need to be
```
expect(1 == 2).toBeTrue();
```
PR Close#34625
Enables the `service-worker` tests on Saucelabs and fixes some issues that were preventing them from running on IE. The issues were:
1. We were serving es2017 code during tests. I've set it to es5.
2. The check which was verifying whether the environment is supported ended up hitting a `require` call in the browser which caused it to fail on browsers that don't support the `URL` API.
PR Close#36129
Previously, some of the built-in ServiceWorker registration strategies,
namely `registerWithDelay:<timeout>` and `registerWhenStable:<timeout>`,
would register potentially long-running timeout, thus preventing the app
from stabilizing before the timeouts expired. This was especially
problematic for the `registerWhenStable:<timeout>` strategy, which waits
for the app to stabilize, because the strategy itself would prevent the
app from stabilizing and thus the ServiceWorker would always be
registered after the timeout.
This commit fixes this by subscribing to the registration strategy
observable outside the Angular zone, thus not affecting the app's
stabilization.
PR Close#35870
Previously, when using the default ServiceWorker registration strategy
Angular would wait indefinitely for the [app to stabilize][1], before
registering the ServiceWorker script. This could lead to a situation
where the ServiceWorker would never be registered when there was a
long-running task (such as an interval or recurring timeout).
Such tasks can often be started by a 3rd-party dependency (beyond the
developer's control or even without them realizing). In addition, this
situation is particularly hard to detect, because the ServiceWorker is
typically not used during development and on production builds a
previous ServiceWorker instance might be already active.
This commit fixes this by changing the default registration strategy
from `registerWhenStable` to `registerWhenStable:30000`, which will
ensure that the ServiceWorker will be registered after 30s at the
latest, even if the app has not stabilized by then.
Fixes#34464
PR Close#35870
Previously, when using the `registerWhenStable` ServiceWorker
registration strategy (which is also the default) Angular would wait
indefinitely for the [app to stabilize][1], before registering the
ServiceWorker script. This could lead to a situation where the
ServiceWorker would never be registered when there was a long-running
task (such as an interval or recurring timeout).
Such tasks can often be started by a 3rd-party dependency (beyond the
developer's control or even without them realizing). In addition, this
situation is particularly hard to detect, because the ServiceWorker is
typically not used during development and on production builds a
previous ServiceWorker instance might be already active.
This commit enhances the `registerWhenStable` registration strategy by
adding support for an optional `<timeout>` argument, which guarantees
that the ServiceWorker will be registered when the timeout expires, even
if the app has not stabilized yet.
For example, with `registerWhenStable:5000` the ServiceWorker will be
registered as soon as the app stabilizes or after 5 seconds if the app
has not stabilized by then.
Related to #34464.
[1]: https://angular.io/api/core/ApplicationRef#is-stable-examples
PR Close#35870
ts-api-guardian uses `require.resolve` to resolve the actual and golden files under bazel. In Windows for these files to be resolved correct the full path including the workspace name as per the MANIFEST entries is required.
This used to be the case until the recent changes done to use npm_integration tests
83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L19)83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L28)
```
bazel test //packages/... --test_tag_filters=api_guard
//packages/animations:animations_api (cached) PASSED in 18.4s
//packages/common:common_api (cached) PASSED in 25.5s
//packages/compiler-cli:compiler_options_api (cached) PASSED in 12.4s
//packages/compiler-cli:error_code_api (cached) PASSED in 11.6s
//packages/core:core_api (cached) PASSED in 20.6s
//packages/core:ng_global_utils_api (cached) PASSED in 13.5s
//packages/elements:elements_api (cached) PASSED in 11.9s
//packages/forms:forms_api (cached) PASSED in 13.9s
//packages/http:http_api (cached) PASSED in 14.8s
//packages/localize:localize_api (cached) PASSED in 6.3s
//packages/platform-browser:platform-browser_api (cached) PASSED in 18.1s
//packages/platform-browser-dynamic:platform-browser-dynamic_api (cached) PASSED in 14.0s
//packages/platform-server:platform-server_api (cached) PASSED in 13.9s
//packages/platform-webworker:platform-webworker_api (cached) PASSED in 13.7s
//packages/platform-webworker-dynamic:platform-webworker-dynamic_api (cached) PASSED in 11.7s
//packages/router:router_api (cached) PASSED in 19.9s
//packages/service-worker:service-worker_api (cached) PASSED in 18.1s
//packages/upgrade:upgrade_api (cached) PASSED in 13.5s
```
Reference: DEV-71
PR Close#36034
Moves the public api .d.ts files from tools/public_api_guard to
goldens/public-api.
Additionally, provides a README in the goldens directory and a script
assist in testing the current state of the repo against the goldens as
well as a command for accepting all changes to the goldens in a single
command.
PR Close#35768
Switches our tslint setup to the standard `tslint.json` linter excludes.
The set of files that need to be linted is specified through a Yarn script.
For IDEs, open files are linted with the closest tslint configuration, if the
tslint IDE extension is set up, and the source file is not excluded.
We cannot use the language service plugin for tslint as we have multiple nested
tsconfig files, and we don't want to add the plugin to each tsconfig. We
could reduce that bloat by just extending from a top-level tsconfig that
defines the language service plugin, but unfortunately the tslint plugin does
not allow the use of tslint configs which are not part of the tsconfig project.
This is problematic since the tslint configuration is at the project root, and we
don't want to copy tslint configurations next to each tsconfig file.
Additionally, linting of `d.ts` files has been re-enabled. This has been
disabled in the past and a TODO has been left. This commit fixes the
lint issues and re-enables linting.
PR Close#35800
Prior to this commit the service worker only treated 504 errors as "effectively offline".
This commit changes the behaviour to treat both 503 (Service Unavailable) and 504 as "offline".
Fixes#35571
PR Close#35595
* it's tricky to get out of the runfiles tree with `bazel test` as `BUILD_WORKSPACE_DIRECTORY` is not set but I employed a trick to read the `DO_NOT_BUILD_HERE` file that is one level up from `execroot` and that contains the workspace directory. This is experimental and if `bazel test //:test.debug` fails than `bazel run` is still guaranteed to work as `BUILD_WORKSPACE_DIRECTORY` will be set in that context
* test //integration:bazel_test and //integration:bazel-schematics_test exclusively
* run "exclusive" and "manual" bazel-in-bazel integration tests in their own CI job as they take 8m+ to execute
```
//integration:bazel-schematics_test PASSED in 317.2s
//integration:bazel_test PASSED in 167.8s
```
* Skip all integration tests that are now handled by angular_integration_test except the tests that are tracked for payload size; these are:
- cli-hello-world*
- hello_world__closure
* add & pin @babel deps as newer versions of babel break //packages/localize/src/tools/test:test
@babel/core dep had to be pinned to 7.6.4 or else //packages/localize/src/tools/test:test failed. Also //packages/localize uses @babel/generator, @babel/template, @babel/traverse & @babel/types so these deps were added to package.json as they were not being hoisted anymore from @babel/core transitive.
NB: integration/hello_world__systemjs_umd test must run with systemjs 0.20.0
NB: systemjs must be at 0.18.10 for legacy saucelabs job to pass
NB: With Bazel 2.0, the glob for the files to test `"integration/bazel/**"` is empty if integation/bazel is in .bazelignore. This glob worked under these conditions with 1.1.0. I did not bother testing with 1.2.x as not having integration/bazel in .bazelignore is correct.
PR Close#33927
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
Before creating a mutating http request, service-worker
invalidates lru cache entry and writes to cache storage.
Therefore, cache storage failure can prevent making post requests.
Fix this by catching and logging cache error, add a test case.
Fixes#33793
PR Close#33930
In 5d5c94d83, the deprecated `versionedFiles` option from the SW
asset-group configuration in `ngsw-config.json`. As a result, the
option would be silently ignored and the runtime behavior of the SW
would change (i.e. some files might not be cached and available offline
any more). This change could be easily go unnoticed by the developer.
This commit ensures this does not happen by throwing a build-time error,
when detecting the unsupported `versionedFiles` option with an error
message prompting the user to use the `files` option instead.
Jira issue: [FW-1727](https://angular-team.atlassian.net/browse/FW-1727)
PR Close#33903
This is a breaking change in nodejs rules 0.40.0 as part of the API review & cleanup for the 1.0 release. Their APIs are identical as ts_web_test was just karma_web_test without the config_file attribute.
PR Close#33802
Sonu Kapoor
George Kalpakas
Paul Gschwendtner
Joey Perrott
Adrien Vergé
Alan Agius
Igor Minar
Maximilian Koeller
JiaLiPassion
crisbeto
Joey Perrott
Felix Becker
Alex Wiese
Greg Magolan
atscott
Denis Omelkov