The Material units tests job has been disabled with the
typescript upgrade PR since the components repository was
still on an old TypeScript version (due to cyclic dependencies
between the framework and components repository).
Since the components repository has been updated to `9.0.0-next.15`
and now uses the compatible TypeScript version, we can re-enable
ds
Related to this change, we need to ignore the `package.json`
engines when installing the dependencies of the components repo. This
is because the components repo already updated to NodeJS v12 and Yarn
v1.19.1. This is not the case for the CI setup of framework. For now,
since we don't want to change the dev setup (as it slows down
development), we temporarily disable the engines.
Additionally, the material unit tests job now depends on the actual
release packages (not on the ngtsc compiled ones). This is because
the components repo setup relies on NGCC being run. This is also
helpful for validating ngcc against the framework packages.
PR Close#33530
Updates the commit of the Angular components repository for
which the `material-unit-tests` job runs tests against. We need to
update to the latest commit at the time of writing, in order to be able
to remove the gesture tests from the material-ci/blocklist.
This is now possible because the Angular components repository
removes the dependency on `hammerjs` completely.
PR Close#33221
Updates the `material-unit-test` job to run tests against
the latest commit of the Angular Components repository.
The components repository updated to rules_nodejs#0.38.2 before Angular Bazel did.
To do this, the `@angular/bazel` v0.38.2 compatibility changes were patched on postinstall.
This now conflicts because we install a `@angular/bazel` version in the `material-unit-tests` job
that already includes these compatibility changes. This would result in the patch being a noop
for which the `patch` command throws an error.
We can remove this once components can install a released version of `@angular/bazel` that is
compatible with `rules_nodejs#0.38.2`.
PR Close#33073
Updates the `material-unit-test` job to run tests against
the latest commit of the Angular Components repository.
We need to update to a version where components already
updated to `rules_nodejs#0.38.0`.
PR Close#32889
Updates the SHA that will be tested against in the `material-unit-tests` job
to the latest commit in the components repository. SHA 2817c9e2faa4140342336987a692d5dd30bf24c2
is needed in order to make the `material-unit-tests` job pass after the remove
of the `protractor_web_test_suite` bazel rule from @angular/bazel. `protractor_web_test_suite` is
now provided by the @bazel/protractor npm package.
PR Close#32485
The commit range that is associated with a CI build is used for a couple
of things (mostly related to payload-size tracking):
- Determine whether a size change was caused by application code or
dependencies (or both).
- Add the messages of the commits associated with the build (and thus
the payload-size change).
NOTE: The commit range is only used on push builds.
Previously, the commit range was computed based on the
`CIRCLE_COMPARE_URL` environment variable. With [CircleCI Pipelines][1]
enabled, `CIRCLE_COMPARE_URL` is no longer available and the commit
range cannot be reliably detected.
This commit switches `CI_COMMIT_RANGE` to only include the last commit.
This can be less accurate in some rare cases, but is true in the
majority of cases (on push builds). Additionally, it stores the CircleCI
build URL in the database along with the payload data, so the relevant
info can be retrieved when needed.
[1]: https://circleci.com/docs/2.0/build-processing
PR Close#32537
Updates the SHA that will be tested against in the `material-unit-tests` job
to the latest commit in the components repository. SHA 18b9ef3f5529f0fa8f034944681486447af7b879
is needed in order to make the newly introduced material-ci test blocklist effective.
PR Close#32243
Updates the `material-unit-tests` job to the latest commit
on the components repository. 097f4335a4e0b6e6b579829ae3a9cffce6292d2b.
This commit ensures that the postinstall script does not run NGC
on schematic code from `@angular/core`. Running NGC on the
generated schematic code can cause unexpected issues as some
migrations import types directly from `@angular/compiler-cli`
while the entry-point is not usable in all cases.
See: https://github.com/angular/angular/issues/29220.
PR Close#31650
No longer locks the Material unit tests job to a specific branch, but rather allows
locking to a specific commit from a given branch. This allows us to use the
"master" branch from the `components` repository.
PR Close#31569
Previously, the ivy-2019 branch of the Material (aka components) repo was
used, which contains some changes that were necessary to work with Ivy.
These changes are not longer necessary, as Material's master branch is
fully working with Ivy today. To be up-to-date with recent Material
development and its support for more recent dependencies, e.g. TypeScript,
it is desirable for us to be on a newer version of Material.
This commit moves the Material tests away from the ivy-2019 branch, to a
recent commit on master. We are not targeting the master branch itself,
as that would introduce a moving target into Angular's CI checks, which
is undesirable.
Lastly, the usage of gulp to run Material's tests is changed into using
Bazel, as Material itself is now also built with Bazel.
PR Close#31569
Updates the NodeJS version to the latest stable version at the time of
writing (v10.16.0). We need to update our image to use a minimum NodeJS
version of v10.15.0 because new CLI apps automatically install a non-locked
version of selenium-webdriver that now requires NodeJS >= 10.15.0 since the
latest release of 17th June 2019 (4.0.0-alpha.3).
See CI failures: https://circleci.com/gh/angular/angular/359077
PR Close#31088
Previously, the `aio_monitoring_stable` job (which runs tests against
https://angular.io/) was using the tests from the master branch. As a
result, if the master branch included changes in those tests that were
not yet backported to the stable branch (and thus deployed to
https://angular.io/), the tests would fail.
This commit fixes this by using the tests from the stable branch to test
against https://angular.io/.
Fixes#30101
PR Close#30110
Currently when `sauce-connect` times out after 2min, we just
print a message saying that the SauceLabs tunnel didn't establish
within 2min. In order to make debugging easier, we now print the
full log file output on failure.
PR Close#29084
Previously, our yarn (which overwrote the pre-installed yarn on the
docker image) was only available through `$BASH_ENV` (as an exported
function). This caused it to be undefined for commands executed in other
shells (e.g. via Node.js' `child_process.spawn()` unless explicitly
configuring it to run with `bash`).
This commit fixes this by making our yarn version available globally via
a symlink (`/usr/local/bin/yarn`).
(This was accidentally broken in #28839.)
PR Close#28889
As discussed in https://github.com/angular/angular/pull/28546#discussion_r254068014, we want to combine the
`define_env_vars` and `download_yarn` anchor since downloading Yarn depends on setting up the
environment variables. In addition this simplifies our setup and reduces code-duplication.
PR Close#28788
Previously, in order for the `aio_monitoring` failure notifications to
work, the steps up to `define_env_vars` should have succeeded. This
meant that any failures in earlier steps would not send notifications.
This commit fixes it by making the notification step independent of the
`define_env_vars` step.
PR Close#28555
Currently our version of Yarn is installed through
the "circleci/node" docker image. This is problematic
because in order to be able to update Yarn, we always
need to update the docker image to a version that
comes with the desired Yarn version. Sometimes there
is no docker image with the desired latest Yarn version,
and therefore we cannot easily update the Yarn version.
Additionally updating the docker image also means that
we need to update our version of NodeJS, as well as the
version of `openssl` might have changed (meaning that
our encrypted credential files may not be decodable with
the new version of `openssl`)
PR Close#28546
By default, `webdriver-manager update` will download the latest
ChromeDriver version, which might not be compatible with the Chrome
version included in the [docker image used on CI], causing CI failures.
Previously, we used to pin the ChromeDriver version on CI in
[ngcontainer's Dockerfile][2]. This was accidentally broken in #26691,
while moving from ngcontainer to default CircleCI docker images.
This commit fixes the issue by pinning ChromeDriver to a known
compatible version.
[1]: bfd48d156d/.circleci/config.yml (L16)
[2]: bfd48d156d/tools/ngcontainer/Dockerfile (L63)
PR Close#28494
On push builds, CircleCI provides `CIRCLE_COMPARE_URL`, which we use to
extract the commit range for a given build. When a workflow is rerun
(e.g. to recover from a flaked job), `CIRCLE_COMPARE_URL` is not
defined, causing some jobs to fail.
This commit fixes it by retrieving the compare URL from the original
workflow. It uses a slow process involving a (potentially large) number
of requests to CircleCI API.
It depends on the (undocumented) fact, that the `workspace_id` is the
same on all rerun workflows and the same as the original `workflow_id`.
PR Close#27775
Moving the tests over to CircleCI in pretty much "as-is" state just so that we can drop the dependency on Travis.
In the followup changes we plan to migrate these tests to run on sauce under bazel. @gregmagolan is working on that.
I've previously verified that all the tests executed in legacy-unit-tests-local already under bazel.
Therefore the legacy-unit-tests-local job is strictly not necessary any more, but given how flaky legacy-unit-tests-saucelabs is,
it is good to have the -local job just so that we can quickly determine if any failure is a flake or legit issue
(the bazel version of these tests could theoretically run in a slightly different way and fail or not fail in a different way, so having -lcoal job is just an extra safety check).
This change was coauthored with @devversion
PR Close#27937
Paul Gschwendtner
Greg Magolan
George Kalpakas
Kara Erickson
Joey Perrott
JoostK
Alex Eagle
Alex Eagle
Igor Minar