Update the supported range of node versions for to be less restrictive, no longer causing
yarn or npm to fail engine's checks for future versions of node.
While this change will no longer cause yarn or npm to fail these engine's check, this does
not reflect a change in the officially supported versions of node for Angular. Angular
continues to maintain support for Active LTS and Maintenance LTS versions of node.
PR Close#42205
Remove publishConfig property from the package.json entry for each of the entries in
the publish configuration. Using the wombat proxy is now ensured/managed by the
ng-dev release tooling.
PR Close#42104
TypeScript supports ECMAScript private identifiers. It can happen that
developers intend to access such members from within an expression.
This currently results in an unclear error from the lexer. e.g.
```
'Parser Error: Unexpected token # at column 1 in [{{#myField}}] in C:/test.ts@5:2
```
We could improve such errors by tokenizing private identifiers similar to
how the TypeScript scanner processes them. Later we can report better
errors in the expression parser or in the typecheck block. This commit
causes all private identifier tokens to be disallowed, so it never
reaches the type checker. This is done intentionally as private
identifiers should not be considered valid Angular syntax, especially
because private fields are not guaranteed to be accessible from within
a component/directive definition (e.g. there cases where a template
function is generated outside of the class; which results in private
members not being accessible; and this results in mixed/confusing
behavior).
Fixes#36003.
PR Close#42027
Currently the compiler treats `@page` rules in the same way as `@media`, however that is incorrect and it results in invalid CSS, because `@page` allows style declarations at the root (e.g. `@page (margin: 50%) {}`) and it only allows a limited set of at-rules to be nested into it. Given these restrictions, we can't really encapsulate the styles since they apply at the document level when the user tries to print.
These changes make it so that `@page` rules are preserved so that we don't break the user's CSS.
More information: https://www.w3.org/TR/css-page-3Fixes#26269.
PR Close#41915
This commit adds support for `$` in when selecting attributes.
Resolves#41244.
test(language-service): Add test to expose bug caused by source file change (#41500)
This commit adds a test to expose the bug caused by source file change in
between typecheck programs.
PR Close#41500
PR Close#41567
`@font-face` rules cannot contain nested selectors. Nor can they be
nested under a selector. Normally this would be a syntax error by the
author of the styles. But in some rare cases, such as importing styles
from a library, and applying `:host ::ng-deep` to the imported styles,
we can end up with broken css if the imported styles happen to contain
`@font-face` rules.
This commit works around this problem by sanitizing such cases (erasing
any scoping selectors) during emulated ShadowDOM encapsulation style
processing.
Fixes#41751
PR Close#41815
We have a check that determines whether to generate property binding instructions for an `ng-template`. The check looks at whether the tag name is exactly `ng-template`, but the problem is that if the tag is placed in a non-HTML namespace (e.g. `svg`), the tag name will actually be `:namespace:ng-template` and the check will fail.
These changes resolve the issue by looking at the tag name without the namespace.
Fixes#41308.
PR Close#41669
Currently if a component defines a template inline, but not through a
string literal, the partial compilation references the template expression
as is. This is problematic because the component declaration can no longer
be processed by the linker later as there is no static interpretation. e.g.
```js
const myTemplate = `...`;
TestCmp.ɵcmp = i0.ɵɵngDeclareComponent({
version: "0.0.0-PLACEHOLDER",
type: TestCmp,
selector: "test-cmp",
ngImport: i0,
template: myTemplate,
isInline: true
});
```
To fix this, we use the the resolved template in such cases so that
the linker can process the template/component declaration as expected.
PR Close#41583
With the introduction of the partial compilation, the Angular compiler's
existing `parseTemplate` method has been extended to pass through multiple
properties purely in favor of the partial compilation.
e.g. the `parseTemplate` function now accepts an "option" called `isInline`.
This option is just passed through and returned as part of the `ParsedTemplate`.
This is not ideal because the `parseTemplate` function doesn't care
whether the specified template was inline or not. This commit cleans
up the `parseTemplate` compiler function so that nothing needed only
for the partial compilation is added to it.
We introduce a new struct for additional template information that
is specific to the generation of the `declareComponent` function. With
that change, we can simplify the component decorator handler and keep
logic more local.
PR Close#41583
This is follow-up from #41437 and it reduces the amount of code we generate for safe property accesses (`a?.b`) and nullish coalescing (`a ?? b`) by:
1. Reusing variables in nested nullish coalescing expressions.
2. Not initializing temporary variables to `null`. The way our code is generated means that the value will always be overwritten before we compare against it so the initializer didn't really matter.
Fixes#41491.
PR Close#41563
Previously, it was not possible to block a partial-linker from trying to
process a declaration that was defined in a newer version of Angular than
that of the partial-linker. For example, if a partial-linker was published as
part of version 12.0.0, there was no way for a partially-compiled declaration
compiled via version 13.0.0 to tell the 12.0.0 linker that it would be invalid
to attempt to process it.
This commit adds a new `minVersion` property to partial-declarations, which is
interpreted as the "minimum partial-linker version" that can process this
declaration. When selecting a partial-linker for such a declaration, the known
linker version ranges are checked to find the most recent linker whose version
range has an overlap with the interpreted declaration range.
This approach allows us to set a minimum version for a declaration, which
can inform an old partial-linker that will it not be able to accurately
process the declaration.
Note that any pre-release part to versions are ignored in this selection
process.
The file-linker can be configured, via the `unknownDeclarationVersionHandling`
property of `LinkerOptions`, to handle such a situation in one of three ways:
- `error` - the version mismatch is a fatal error
- `warn` - a warning is sent to the logger but the most recent partial-linker
will attempt to process the declaration anyway.
- `ignore` - the most recent partial-linker will, silently, attempt to process
the declaration.
The default is to throw an error.
Closes#41497
PR Close#41578
`EmptyExpr` is somewhat unique, in that it's constructed in a circumstance
where the parser has been looking for a particular token or string of tokens
and has failed to find any. This means the parser state when constructing
`EmptyExpr` is fairly unique.
This gives rise to a bug where the parser constructs `EmptyExpr` with a
backwards span - a `start` value that's beyond the `end` value. This likely
happens because of the strange state the parser is in when recovering with
`EmptyExpr`.
This commit adds a backstop/workaround to avoid constructing such broken
`EmptyExpr` spans (or any other kind of span). Eventually, the parser state
should be fixed such that this does not occur, but that requires a
significant change to the parser's functionality, so a simple fix in th
interim is in order.
PR Close#41581
This commit adds a separate span to `MethodCall` and `SafeMethodCall` which
tracks the text span between the `(` and `)` tokens of the call. Tools like
the Language Service can use this span to more accurately understand a
cursor position within a method call expression.
PR Close#41581
When an Ivy NgModule is imported into a View Engine build, it doesn't have
metadata.json files that describe it as an NgModule, so it appears to VE
builds as a plain, undecorated class. The error message shown in this
situation generic and confusing, since it recommends adding an @NgModule
annotation to a class from a library.
This commit adds special detection into the View Engine compiler to give a
more specific error message when an Ivy NgModule is imported.
PR Close#41534
This commit refactors the generated code for class metadata in partial
compilation mode. Instead of emitting class metadata into a top-level
`ɵsetClassMetadata` call guarded by `ngDevMode` flags, the class
metadata is now declared using a top-level `ɵɵngDeclareClassMetadata`
call.
PR Close#41200
This commit changes the partial compilation so that it outputs declarations
rather than definitions for injectables.
The JIT compiler and the linker are updated to be able to handle these
new declarations.
PR Close#41316
The other similar interfaces were renamed in https://github.com/angular/angular/pull/41119,
but this one was left since it had existed before Ivy. It looks like the interface was
never actually exposed on npm so it is safe to rename this one too.
PR Close#41316
In #41104 the list of used directives was split into two arrays of used
directives and components, but the JIT side was not updated. This commit
fixes the JIT integration by including the list of used components.
Fixes#41318
PR Close#41353
Currently we normalize all CSS property names in the `StylingBuilder` which breaks custom properties, because they're case-sensitive. These changes add a check so that custom properties aren't normalized.
Fixes#41364.
PR Close#41380
This enumeration will now start to appear in publicly facing code,
as part of declarations, so we remove the R3 to make it less specific
to the internal name for the Ivy renderer/compiler.
PR Close#41231
Now that other values were removed from `R3ResolvedDependencyType`,
its meaning can now be inferred from the other properties in the
`R3DeclareDependencyMetadata` type. This commit removes this enum
and updates the code to work without it.
PR Close#41231
This instruction was created to work around a problem with injecting a
`ChangeDetectorRef` into a pipe. See #31438. This fix required special
metadata for when the thing being injected was a `ChangeDetectorRef`.
Now this is handled by adding a flag `InjectorFlags.ForPipe` to the
`ɵɵdirectiveInject()` call, which avoids the need to special test_cases
`ChangeDetectorRef` in the generated code.
PR Close#41231
This commit changes the partial compilation so that it outputs declaration
calls rather than compiled factory functions.
The JIT compiler and the linker are updated to be able to handle these
new declarations.
PR Close#41231
Adds a `collectCommentNodes` option on `ParseTemplateOptions` which will cause the returned `ParsedTemplate` to include an array of all html comments found in the template.
PR Close#41251
The `ɵɵInjectorDef` interface is internal and should not be published publicly
as part of libraries. This commit updates the compiler to render an opaque
type, `ɵɵInjectorDeclaration`, for this instead, which appears in the typings
for compiled libraries.
PR Close#41119
Th `ɵɵFactoryDef` type will appear in published libraries, via their typings
files, to describe what type dependencies a DI factory has. The parameters
on this type are used by tooling such as the Language Service to understand
the DI dependencies of the class being created by the factory.
This commit moves the type to the `public_definitions.ts` file alongside
the other types that have a similar role, and it renames it to `ɵɵFactoryDeclaration`
to align it with the other declaration types such as `ɵɵDirectiveDeclaration`
and so on.
PR Close#41119
These types are only used in the generated typings files to provide
information to the Angular compiler in order that it can compile code
in downstream libraries and applications.
This commit aliases these types to `unknown` to avoid exposing the
previous alias types such as `ɵɵDirectiveDef`, which are internal to
the compiler.
PR Close#41119
When there was more than one rule in a single style string, only the first
rule was having its `:host` selector processed correctly. Now subsequent
rules will also be processed accurately.
Fixes#41237
PR Close#41261
Previously presence of both [class] and [className] bindings on an element was treated as compiler error (implemented in 6f203c9575). Later, the situation was improved to actually allow both bindings to co-exist (see a153b61098), however the compiler check was not removed completely. The only situation where the error is thrown at this moment is when static (but with interpolation) and bound `class` attributes are present on an element, for ex.:
```
<div class="{{ one }}" [class]="'two'"></div>
```
In the current situation the error is acually misleading (as it refers to `[className]`).
This commit removes the mentioned compiler check as obsolete and makes the `class` and `style` attribute processing logically the same (the last occurrence is used to compute the value).
PR Close#41254
The partial declaration of a component includes the list of directives
that are used in its template, including some metadata of the directive
which can be used during actual compilation of the component. Used
components are currently part of this list, as components are also
directives. This commit splits the used components into a dedicate
property in the partial declaration, which allows for template
compilation to optimize the generated code for components.
PR Close#41104
This commit changes the partial compilation so that it outputs declaration
calls rather than definition calls for NgModules and Injectors.
The JIT compiler and the linker are updated to be able to handle these
new declarations.
PR Close#41080
There were a number of almost identical interfaces used in
the same way throughout the Render3 compiler code.
This commit changes the compiler to use the same interface
throughout.
PR Close#41080
This function is declared in multiple places. The instances inside
`compiler` are slightly different to those in `compiler-cli`. So this
commit consolidates them into two reusable functions.
PR Close#41080
BREAKING CHANGE:
Switching default of `emitDistinctChangesOnlyDefaultValue`
which changes the default behavior and may cause some applications which
rely on the incorrect behavior to fail.
`emitDistinctChangesOnly` flag has also been deprecated and will be
removed in a future major release.
The previous implementation would fire changes `QueryList.changes.subscribe`
whenever the `QueryList` was recomputed. This resulted in an artificially
high number of change notifications, as it is possible that recomputing
`QueryList` results in the same list. When the `QueryList` gets recomputed
is an implementation detail, and it should not be the thing that determines
how often change event should fire.
Unfortunately, fixing the behavior outright caused too many existing
applications to fail. For this reason, Angular considers this fix a
breaking fix and has introduced a flag in `@ContentChildren` and
`@ViewChildren`, that controls the behavior.
```
export class QueryCompWithStrictChangeEmitParent {
@ContentChildren('foo', {
// This option is the new default with this change.
emitDistinctChangesOnly: true,
})
foos!: QueryList<any>;
}
```
For backward compatibility before v12
`emitDistinctChangesOnlyDefaultValue` was set to `false. This change
changes the default to `true`.
PR Close#41121
Previously, injector definitions contained a `factory` property that
was used to create a new instance of the associated NgModule class.
Now this factory has been moved to its own `ɵfac` static property on the
NgModule class itself. This is inline with how directives, components and
pipes are created.
There is a small size increase to bundle sizes for each NgModule class,
because the `ɵfac` takes up a bit more space:
Before:
```js
let a = (() => {
class n {}
return n.\u0275mod = c.Cb({type: n}),
n.\u0275inj = c.Bb({factory: function(t) { return new (t || n) }, imports: [[e.a.forChild(s)], e.a]}),
n
})(),
```
After:
```js
let a = (() => {
class n {}
return n.\u0275fac = function(t) { return new (t || n) },
n.\u0275mod = c.Cb({type: n}),
n.\u0275inj = c.Bb({imports: [[r.a.forChild(s)], r.a]}),
n
})(),
```
In other words `n.\u0275fac = ` is longer than `factory: ` (by 5 characters)
and only because the tooling insists on encoding `ɵ` as `\u0275`.
This can be mitigated in a future PR by only generating the `ɵfac` property
if it is actually needed.
PR Close#41022
Joey Perrott
Paul Gschwendtner
Alex Rickabaugh
Julien Marcou
Georgii Dolzhykov
Kristiyan Kostadinov
nirmal bhagwani
Pete Bacon Darwin
JoostK
James Henry
Andrew Kushnir
Misko Hevery