Update the supported range of node versions for to be less restrictive, no longer causing
yarn or npm to fail engine's checks for future versions of node.
While this change will no longer cause yarn or npm to fail these engine's check, this does
not reflect a change in the officially supported versions of node for Angular. Angular
continues to maintain support for Active LTS and Maintenance LTS versions of node.
PR Close#42205
Remove publishConfig property from the package.json entry for each of the entries in
the publish configuration. Using the wombat proxy is now ensured/managed by the
ng-dev release tooling.
PR Close#42104
Makes the following improvements to the listener instructions to make them slightly smaller and more memory-efficient.
1. Removes the default value from the `useCapture` parameter since it generates more code than just castint to `false`.
2. Removes the `useCapture` and `eventTargetResolver` parameters from `ɵɵsyntheticHostListener` since they won't be generated by the compiler, as far as I can tell.
3. Makes it so that we don't have to return a target name from a `GlobalTargetResolver`. This allows us to save on some memory, because we can return a reference to the target without having to wrap it in an object literal.
DEPRECATIONS:
`EventManagerPlugin.getGlobalEventTarget` is now deprecated and won't be called from Ivy code anymore. Global events will go through `addEventListener`.
PR Close#41807
With this change we move `XhrFactory` to the root entrypoint of `@angular/commmon`, this is needed so that we can configure `XhrFactory` DI token at a platform level, and not add a dependency between `@angular/platform-browser` and `@angular/common/http`.
Currently, when using `HttpClientModule` in a child module on the server, `ReferenceError: XMLHttpRequest is not defined` is being thrown because the child module has its own Injector and causes `XhrFactory` provider to be configured to use `BrowserXhr`.
Therefore, we should configure the `XhrFactory` at a platform level similar to other Browser specific providers.
BREAKING CHANGE:
`XhrFactory` has been moved from `@angular/common/http` to `@angular/common`.
**Before**
```ts
import {XhrFactory} from '@angular/common/http';
```
**After**
```ts
import {XhrFactory} from '@angular/common';
```
Closes#41311
PR Close#41313
The `DomAdapter` is present in all Angular apps and its methods aren't tree shakeable.
These changes remove the methods that either aren't being used anymore or were only
used by our own tests. Note that these changes aren't breaking, because the adapter
is an internal API.
The following methods were removed:
* `getProperty` - only used within our own tests.
* `log` - Guaranteed to be defined on `console`.
* `logGroup` and `logGroupEnd` - Only used in one place. It was in the DomAdapter for built-in null checking.
* `logGroupEnd` - Only used in one place. It was placed in the DomAdapter for built in null checking.
* `performanceNow` - Only used in one place that has to be invoked through the browser console.
* `supportsCookies` - Unused.
* `getCookie` - Unused.
* `getLocation` and `getHistory` - Only used in one place which appears to have access to the DOM
already, because it had direct accesses to `window`. Furthermore, even if this was being used
in a non-browser context already, the `DominoAdapter` was set up to throw an error.
The following APIs were changed to be more compact:
* `supportsDOMEvents` - Changed to a readonly property.
* `remove` - No longer returns the removed node.
PR Close#41102
In the new behavior Angular cleanups `popstate` and `hashchange` event listeners
when the root view gets destroyed, thus event handlers are not added twice
when the application is bootstrapped again.
BREAKING CHANGE:
Methods of the `PlatformLocation` class, namely `onPopState` and `onHashChange`,
used to return `void`. Now those methods return functions that can be called
to remove event handlers.
PR Close#31546
PR Close#40867
`@angular/platform-server` provides the foundation for rendering an
Angular app on the server. In order to achieve that, it uses a
server-side DOM implementation (currently [domino][1]).
For rendering on the server to work as closely as possible to running
the app on the browser, we need to make DOM globals (such as `Element`,
`HTMLElement`, etc.), which are normally provided by the browser,
available as globals on the server as well.
Currently, `@angular/platform-server` achieves this by extending the
`global` object with the DOM implementation provided by `domino`. This
assignment happens in the [setDomTypes()][2] function, which is
[called in a `PLATFORM_INITIALIZER`][3]. While this works in most cases,
there are some scenarios where the DOM globals are needed sooner (i.e.
before initializing the platform). See, for example, #24551 and #39950
for more details on such issues.
This commit provides a way to solve this problem by exposing a
side-effect-ful entry-point (`@angular/platform-server/init`), that
shims the `global` object with DOM globals. People will be able to
import this entry-point in their server-rendered apps before
bootstrapping the app (for example, in their `main.server.ts` file).
(See also [#39950 (comment)][4].)
In a future update, the [`universal` schematics][5] will include such an
import by default in newly generated projects.
[1]: https://www.npmjs.com/package/domino
[2]: https://github.com/angular/angular/blob/0fc8466f1be392917e0c/packages/platform-server/src/domino_adapter.ts#L17-L21
[3]: https://github.com/angular/angular/blob/0fc8466f1be392917e0c/packages/platform-server/src/server.ts#L33
[4]: https://github.com/angular/angular/issues/39950#issuecomment-747598403
[5]: https://github.com/angular/angular-cli/blob/cc51432661eb4ab4b6a3/packages/schematics/angular/universal
PR Close#40559
The `platform-server` package currently depends on the [domino][1]
package. This commit adds `domino` to the list of dependencies for the
`platform-server` `ng_module` target.
[1]: https://www.npmjs.com/package/domino
PR Close#40559
* Fixes that the Ivy styling logic wasn't accounting for `!important` in the property value.
* Fixes that the default DOM renderer only sets `!important` on a property with a dash in its name.
* Accounts for the `flags` parameter of `setStyle` in the server renderer.
Fixes#35323.
PR Close#39603
This commit fixes a bug when `useAbsoluteUrl` is set to true and
`ServerPlatformLocation` infers the base url from the supplied
`url`. User should explicitly set the `baseUrl` when they turn on
`useAbsoluteUrl`.
Breaking change:
If you use `useAbsoluteUrl` to setup `platform-server`, you now need to
also specify `baseUrl`.
We are intentionally making this a breaking change in a minor release,
because if `useAbsoluteUrl` is set to `true` then the behavior of the
application could be unpredictable, resulting in issues that are hard to
discover but could be affecting production environments.
PR Close#39334
Removes `ViewEncapsulation.Native` which has been deprecated for several major versions.
BREAKING CHANGES:
* `ViewEncapsulation.Native` has been removed. Use `ViewEncapsulation.ShadowDom` instead. Existing
usages will be updated automatically by `ng update`.
PR Close#38882
When a ServerStylesHost instance is destroyed, all of the shared styles added to the DOM
head element by that instance should be removed. Without this removal, over time a large
number of style rules will build up and cause extra memory pressure. This brings the
ServerStylesHost in line with the DomStylesHost used by the platform browser, which
performs this same cleanup.
PR Close#38367
In version 10.0.0-next.8, we introduced absolute URL support for
server-based HTTP requests, so long as the fully-resolved URL was
provided in the initial config. However, doing so represents a
breaking change for users who already have their own interceptors
to model this functionality, since our logic executes before all
interceptors fire on a request. See original PR #37071.
Therefore, we introduce a flag to make this change consistent with
v9 behavior, allowing users to opt in to this new behavior. This
commit also fixes two issues with the previous implementation:
1. if the server was initiated with a relative URL, the absolute
URL construction would fail because needed components were empty
2. if the user's absolute URL was on a port, the port would not
be included
PR Close#37539
Previously, we would simply prepend any relative URL with the HREF
for the current route (pulled from document.location). However,
this does not correctly account for the leading slash URLs that
would otherwise be parsed correctly in the browser, or the
presence of a base HREF in the DOM.
Therefore, we use the built-in URL implementation for NodeJS,
which implements the WHATWG standard that's used in the browser.
We also pull the base HREF from the DOM, falling back on the full
HREF as the browser would, to form the correct request URL.
Fixes#37314
PR Close#37341
Due to an outage with the proxy we rely on for publishing, we need
to temporarily directly publish to NPM using our own angular
credentials again.
PR Close#37378
Before the introduction of the Ivy renderer, users would compile
their applications and use the resulting factories for SSR, since
these post-compilation artifacts ensured faster delivery. Thus,
using the original module as the rendering entrypoint was
considered suboptimal and was discouraged.
However, with the introduction of Ivy, this guidance is no longer
applicable since these factories are no longer generated.
Comparable speed is achieved using the factory-less module
renderer, and so we update the guiance in the docs for the method.
PR Close#37296
Tslib version is bound to the TypeScript version used to compile the library. Thus, we shouldn't list `tslib` as a `peerDependencies`. This is because, a user can install libraries which have been compiled with older versions of TypeScript and thus require multiple `tslib` versions to be installed.
Reference: TOOL-1374 and TOOL-1375
Closes: #37188
PR Close#37198
Currently, requests from the server that do not use absolute URLs
fail because the server does not have the same fallback mechanism
that browser XHR does. This adds that mechanism by pulling the
full URL out of the document.location object, if available.
PR Close#37071
We can remove all of the entry point resolution configuration from the package.json
in our source code as ng_package rule adds the properties automatically and correctly
configures them.
This change simplifies our code base but doesn't have any impact on the package.json
in the distributed npm_packages.
PR Close#36944
ts-api-guardian uses `require.resolve` to resolve the actual and golden files under bazel. In Windows for these files to be resolved correct the full path including the workspace name as per the MANIFEST entries is required.
This used to be the case until the recent changes done to use npm_integration tests
83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L19)83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L28)
```
bazel test //packages/... --test_tag_filters=api_guard
//packages/animations:animations_api (cached) PASSED in 18.4s
//packages/common:common_api (cached) PASSED in 25.5s
//packages/compiler-cli:compiler_options_api (cached) PASSED in 12.4s
//packages/compiler-cli:error_code_api (cached) PASSED in 11.6s
//packages/core:core_api (cached) PASSED in 20.6s
//packages/core:ng_global_utils_api (cached) PASSED in 13.5s
//packages/elements:elements_api (cached) PASSED in 11.9s
//packages/forms:forms_api (cached) PASSED in 13.9s
//packages/http:http_api (cached) PASSED in 14.8s
//packages/localize:localize_api (cached) PASSED in 6.3s
//packages/platform-browser:platform-browser_api (cached) PASSED in 18.1s
//packages/platform-browser-dynamic:platform-browser-dynamic_api (cached) PASSED in 14.0s
//packages/platform-server:platform-server_api (cached) PASSED in 13.9s
//packages/platform-webworker:platform-webworker_api (cached) PASSED in 13.7s
//packages/platform-webworker-dynamic:platform-webworker-dynamic_api (cached) PASSED in 11.7s
//packages/router:router_api (cached) PASSED in 19.9s
//packages/service-worker:service-worker_api (cached) PASSED in 18.1s
//packages/upgrade:upgrade_api (cached) PASSED in 13.5s
```
Reference: DEV-71
PR Close#36034
Moves the public api .d.ts files from tools/public_api_guard to
goldens/public-api.
Additionally, provides a README in the goldens directory and a script
assist in testing the current state of the repo against the goldens as
well as a command for accepting all changes to the goldens in a single
command.
PR Close#35768
* it's tricky to get out of the runfiles tree with `bazel test` as `BUILD_WORKSPACE_DIRECTORY` is not set but I employed a trick to read the `DO_NOT_BUILD_HERE` file that is one level up from `execroot` and that contains the workspace directory. This is experimental and if `bazel test //:test.debug` fails than `bazel run` is still guaranteed to work as `BUILD_WORKSPACE_DIRECTORY` will be set in that context
* test //integration:bazel_test and //integration:bazel-schematics_test exclusively
* run "exclusive" and "manual" bazel-in-bazel integration tests in their own CI job as they take 8m+ to execute
```
//integration:bazel-schematics_test PASSED in 317.2s
//integration:bazel_test PASSED in 167.8s
```
* Skip all integration tests that are now handled by angular_integration_test except the tests that are tracked for payload size; these are:
- cli-hello-world*
- hello_world__closure
* add & pin @babel deps as newer versions of babel break //packages/localize/src/tools/test:test
@babel/core dep had to be pinned to 7.6.4 or else //packages/localize/src/tools/test:test failed. Also //packages/localize uses @babel/generator, @babel/template, @babel/traverse & @babel/types so these deps were added to package.json as they were not being hoisted anymore from @babel/core transitive.
NB: integration/hello_world__systemjs_umd test must run with systemjs 0.20.0
NB: systemjs must be at 0.18.10 for legacy saucelabs job to pass
NB: With Bazel 2.0, the glob for the files to test `"integration/bazel/**"` is empty if integation/bazel is in .bazelignore. This glob worked under these conditions with 1.1.0. I did not bother testing with 1.2.x as not having integration/bazel in .bazelignore is correct.
PR Close#33927
Prior to this change, element namespace was not set for host elements of dynamically created components that resulted in incorrect rendering in a browser. This commit adds the logic to pick and set correct namespace for host element when component is created dynamically.
PR Close#35136
Previously we would write to class/style as strings `element.className` and `element.style.cssText`. Turns out that approach is good for initial render but not good for updates. Updates using this approach are problematic because we have to check to see if there was an out of bound write to style and than perform reconciliation. This also requires the browser to bring up CSS parser which is expensive.
Another problem with old approach is that we had to queue the DOM writes and flush them twice. Once on element advance instruction and once in `hostBindings`. The double flushing is expensive but it also means that a directive can observe that styles are not yet written (they are written after directive executes.)
The new approach uses `element.classList.add/remove` and `element.style.setProperty/removeProperty` API for updates only (it continues to use `element.className` and `element.style.cssText` for initial render as it is cheaper.) The other change is that the styling changes are applied immediately (no queueing). This means that it is the instruction which computes priority. In some circumstances it may result in intermediate writes which are than overwritten with new value. (This should be rare)
Overall this change deletes most of the previous code and replaces it with new simplified implement. The simplification results in code savings.
PR Close#34804
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
Most of the use of `document` in the framework is within
the DI so they just inject the `DOCUMENT` token and are done.
Ivy is special because it does not rely upon the DI and must
get hold of the document some other way. There are a limited
number of places relevant to ivy that currently consume a global
document object.
The solution is modelled on the `LOCALE_ID` approach, which has
`getLocaleId()` and `setLocaleId()` top-level functions for ivy (see
`core/src/render3/i18n.ts`). In the rest of Angular (i.e. using DI) the
`LOCALE_ID` token has a provider that also calls setLocaleId() to
ensure that ivy has the same value.
This commit defines `getDocument()` and `setDocument() `top-level
functions for ivy. Wherever ivy needs the global `document`, it calls
`getDocument()` instead. Each of the platforms (e.g. Browser, Server,
WebWorker) have providers for `DOCUMENT`. In each of those providers
they also call `setDocument()` accordingly.
Fixes#33651
PR Close#33712
Joey Perrott
Julien Marcou
Kristiyan Kostadinov
Alan Agius
arturovt
George Kalpakas
Charles Lyding
Keen Yee Liau
JiaLiPassion
Adam
Igor Minar
Joey Perrott
Felix Becker
Greg Magolan
Andrew Kushnir
Miško Hevery
Paul Gschwendtner
Andrius
atscott
Martin Probst
Judy Bogart
Pete Bacon Darwin