Internally we store lifecycle hooks in the format `[index, hook, index, hook]` and when
iterating over them, we check one place ahead to figure out whether we've hit found
a hook or an index. The problem is that the loop is set up to iterate up to `hooks.length`
which means that we may go out of bounds on the last iteration, depending on where
we started. This appears to happen under a specific set of circumstances where a
directive calls `detectChanges` from an input setter while it has `ngOnChanges` and
`ngAfterViewInit` hooks.
These changes resolve the issue by only iterating up to `length - 1` which guarantees that
we can always look one place ahead.
This appears to have regressed some time in version 10.
Fixes#38611.
PR Close#40206
Previously `\r\n` was being treated as a single character in source-map
line start positions, which caused segment positions to become offset.
Now the `\r` is ignored when splitting, leaving it at the end of the
previous line, which solves the offsetting problem, and does not affect
source-mappings.
Fixes#40169Fixes#39654
PR Close#40187
This commit fixes an issue in the ivy native language service
that caused the logic that finds a target node given a template
position to throw away the results. This happened because the
source span of a variable node in the shorthand structural
directive syntax (i.e. `*ngIf=`) included the entire binding.
The result was that we would add the variable node to the path and then
later detect that the cursor was outside the key and value spans and
throw away the whole result. In general, we do this because we do not
want to show information when the cursor is between a key/value
(`inputA=¦"123"`). However, when using the shorthand syntax, we run into
the situation where we can match an `AttributeBinding` as well as the
vaariable in `*ngIf="som¦eValue as myLocalVar"`. This commit updates the
visitor to retain enough information in the visit path to throw away
invalid targets but keep valid ones if there were multiple results on a
`t.Element` or `t.Template`.
PR Close#40239
The linker entry-points were not previously exposed in the NPM Bazel
target so they were omitted from the bundle. This commit adds the
necessary entry-points to the compiler-cli's npm_package target.
PR Close#40180
The types of directives and pipes that are used in a component's
template may be emitted into the partial declaration wrapped inside a
closure, which is needed when the type is declared later in the module.
This poses a problem for JIT compilation of partial declarations, as
this closure is indistinguishable from a class reference itself. To mark
the forward reference function as such, this commit changes the partial
declaration codegen to emit a `forwardRef` invocation wrapped around
the closure, which ensures that the closure is properly tagged as a
forward reference. This allows the forward reference to be treated as
such during JIT compilation.
PR Close#40117
PR #39876 introduced an error where the `onDestroy` of `ComponentRef`
would only get called if `ngDevMode` was set to true. This was because
in dev mode we would freeze `TCleanup` to verify that no more
static cleanup would get added to `TCleanup` array. This ensured
that `TCleanup` was always present in dev mode. In production the
`TCleanup` would get created only when needed. The resulting cleanup
code was incorrectly indented and would only run if `TCleanup` was
present causing this issue.
Fix#40105
PR Close#40120
Previously, the `SpyDirective` in the `lifecycle-hooks` docs example
would use a different ID when logging `onInit` and when logging
`onDestroy` for the same instance, making it impossible to associate the
two calls. This was not helpful and came in constrast with how the
directive was described in the corresponding guide and shown in the
accompanying `spy-directive.gif` image.
This commit fixes the logic of the `SpyDirective` class to use the same
ID for all log operations of an instance.
Partially addresses #40193.
PR Close#40208
Previously, the docregion code referenced a `nextId` variable that was
not shown in the code, which was confusing for the reader.
This commit makes the declaration of the `nextId` variable part of the
docregion, so it is clear to the reader where it comes from and how it
is initialized.
This commit also removes the `logIt()` helper method, which didn't seem
to add value and calls `logger.log()` directly instead.
PR Close#40208
This commit aligns the order of the links to the various sections of the
`lifecycle-hooks` docs example with the order in which the sections
appear in the template (which also coincides with the order in which
they are presented/discussed in the corresponding guide).
PR Close#40208
This commit updates the versions of Chrome and Firefox used in tests -
both with Bazel and without (via Puppeteer) - to the latest:
- Chrome v87
- Firefox v84
PR Close#40150
This commit adds instructions in `dev-infra/browsers/README.md` on how
to update the version of GeckoDriver (the WebDriver implementation for
Firefox browsers).
NOTE:
The gecko driver download URLs perform redirection, so the `curl`
command needs to be run with the `-L/--location` option to follow
redirects. I updated all `curl` commands (even those that are not used
on gecko driver download URLs) for consistency.
PR Close#40150
Previously, the instructions and process for updating the version of
Chrome ued in tests assumed that there was always going to be a
ChromeDriver version that corresponded to a Chrome version. For example,
if we wanted to use Chrome v87.0.4272.x, we assumed that there was going
to be ChromeDriver v87.0.4272.x. It turns out that this is not always
the case.
This commit updates the instructions and process for updating the Chrome
version to ensure a valid version of ChromeDriver will be used as well.
PR Close#40150
This commit fixes the instructions in `dev-infra/browsers/README.md` to
use the `shasum` executable (instead of `sha256`, which does not exist
afaict).
The commit also fixes a couple of typos.
PR Close#40150
This commit refactor the `dev-infra/browsers/README.md` file to have one
sentence per line. This makes it consistent with other Markdown files in
the repository and makes diffs for future changes more readable.
This commit also uses proper Markdown numbered lists and fixes
indentation.
PR Close#40150
This commit updates `lighthouse` to version 7.0.0.
It also adds a `width` attribute to the `code-icon.svg` image on the
homepage, which was pointed out as missing in the Lighthouse report.
(Explicit `width`/`height` attributes on images help reduce the
[layout shift][1] of the page.)
[1]: https://web.dev/cls/
PR Close#40198
Angular has stopped to support browser that requires that CSS property.
All supported browsers support standard transition-timing-function CSS property
PR Close#40153
Previously, due to a bug in `rebase-pr.js`, PRs for branches containing
a slash (/) in their name would fail to be rebased
([example failure][1]).
This commit ensures that such branch names are handled correctly.
[1]: https://circleci.com/gh/angular/angular/884503
PR Close#40184
This commit adds the "outFiles" config options into the .vscode/recommended-launch.json, which helps speed up
the startup time of a debugging session by limiting the number of files that should be loaded.
PR Close#39848
As part of the `setup` CI job (which is a prerequisite for all other CI
jobs), we rebase the current code on master to make sure the PR changes
are compatible with the latest code from master, even if the PR has not
been rebased recently.
When it is not possible to automatically rebase (i.e. when there are
conflicts that need to be resolved manually), the job and subsequently
the entire workflow should fail.
This behavior has been accidentally broken in #39592, so that the job
would succeed even if the rebase operation failed.
This commit fixes it by ensuring the `exec()` helper used in
`rebase-pr.js` will throw an error if the underlying command execution
fails. Previously, the function would always return stdout output as a
string and attach a `code` property indicating the exit code of the
command.
Since the exit code isn't necessary in the `rebase-pr.js` script, this
commit simplifies the `exec()` helper by making it return the stdout
output as a plain string (without extra properties) and re-throw any
errors (unless the `ignoreError` argument is set to `true`).
(Initially reported [here][1] by @JoostK.)
[1]: https://angular-team.slack.com/archives/C042EU9T5/p1608070403128900
PR Close#40161
Escape the content of the strings so that it can be safely inserted into a comment node.
The issue is that HTML does not specify any way to escape comment end text inside the comment.
`<!-- The way you close a comment is with "-->". -->`. Above the `"-->"` is meant to be text
not an end to the comment. This can be created programmatically through DOM APIs.
```
div.innerHTML = div.innerHTML
```
One would expect that the above code would be safe to do, but it turns out that because comment
text is not escaped, the comment may contain text which will prematurely close the comment
opening up the application for XSS attack. (In SSR we programmatically create comment nodes which
may contain such text and expect them to be safe.)
This function escapes the comment text by looking for the closing char sequence `-->` and replace
it with `-_-_>` where the `_` is a zero width space `\u200B`. The result is that if a comment
contains `-->` text it will render normally but it will not cause the HTML parser to close the
comment.
PR Close#40136
Currently when `ɵɵtemplate` and `ɵɵelement` instructions are generated by compiler, all static attributes are
duplicated for both instructions. As a part of this duplication, i18n translation blocks for static i18n attributes
are generated twice as well, causing duplicate entries in extracted translation files (when Ivy extraction mechanisms
are used). This commit fixes this issue by introducing a cache for i18n translation blocks (for static attributes
only).
Also this commit further aligns `ɵɵtemplate` and `ɵɵelement` instruction attributes, which should help implement
more effective attributes deduplication logic.
Closes#39942.
PR Close#40077
When building the environment stamp, support two modes: release and snapshot
The release mode will always stamp using the current version of in the root package.json
and in snapshot mode will use a version stamp expressing a version based on the tag and
the number of commits from the tag.
PR Close#40095
With this change we split the optimization and source map
configuration section section into two, improve it overall by adding
theoptions a table and add the new options
(`inlineCritical` and `minify`) that have been introduced in
CLI version 11.1
PR Close#40037
Durring analysis we find template parse errors. This commit changes
where the type checking context stores the parse errors. Previously, we
stored them on the AnalysisOutput this commit changes the errors to be
stored on the TemplateData (which is a property on the shim). That way,
the template parse errors can be grouped by template.
Previously, if a template had a parse error, we poisoned the module and
would not procede to find typecheck errors. This change does not poison
modules whose template have typecheck errors, so that ngtsc can emit
typecheck errors for templates with parse errors.
Additionally, all template diagnostics are produced in the same place.
This allows requesting just the template template diagnostics or just
other types of errors.
PR Close#40026
Refactors the i18n error tests to be unit tests in ngtsc_spec.ts. There
is two reasons for doing this.
First is that the tests in compliace_old expected an expection to be be
thrown but did not fail the test if no exception was thrown. That means
that this test could miss catching a bug. It is also a big hacky to call
compile directly and expect an exception to be thrown for diagnostics.
Also, this can easily be unit tested and an end-to-end test is not
necessary since we are not making use of the goldfiles for these tests.
It is easier to maintain and less hacky to validate that we get helpful
error messages when nesting i18n sections by calling getDiagnostics
directly.
PR Close#40026
This commit temporarily excludes classes declared in .d.ts files from checks
regarding whether providers are actually injectable.
Such classes used to be ignored (on accident) because the
`TypeScriptReflectionHost.getConstructorParameters()` method did not return
constructor parameters from d.ts files, mostly as an oversight. This was
recently fixed, but caused more providers to be exposed to this check, which
created a breakage in g3.
This commit temporarily fixes the breakage by continuing to exclude such
providers from the check, until g3 can be patched.
PR Close#40118
This comit adds support for autocompletion of attributes that create
structural directives. Such completions differ from those of normal
attributes, as the structural directive syntax creates a synthetic
<ng-template> node which has different attributes from the main element.
PR Close#40032
This commit introduces an `isStructural` flag on directive metadata, which
is `true` if the directive injects `TemplateRef` (and thus is at least
theoretically usable as a structural directive). The flag is not used for
anything currently, but will be utilized by the Language Service to offer
better autocompletion results for structural directives.
PR Close#40032
This commit adds attribute completion to the Language Service. It completes
from 3 sources:
1. inputs/outputs of directives currently present on the element
2. inputs/outputs/attributes of directives in scope for the element, that
would become present if the input/output/attribute was added
3. DOM properties and attributes
We distinguish between completion of a property binding (`[foo|]`) and a
completion in an attribute context (`foo|`). For the latter, bindings to
the attribute are offered, as well as a property binding which adds the
square bracket notation.
To determine hypothetical matches (directives which would become present if
a binding is added), directives in scope are scanned and matched against a
hypothetical version of the element which has the attribute.
PR Close#40032
This commit adds two new APIs to the `TemplateTypeChecker`:
`getPotentialDomBindings` and `getDirectiveMetadata`. Together, these will
support the Language Service in performing autocompletion of directive
inputs/outputs.
PR Close#40032
The `annotations` package in the compiler previously contained a registry
which tracks NgModule scopes for template type-checking, including unifying
all type-checking metadata across class inheritance lines.
This commit generalizes this utility and prepares it for use in the
`TemplateTypeChecker` as well, to back APIs used by the language service.
PR Close#40032
This commit expands the autocompletion capabilities of the language service
to include element tag names. It presents both DOM elements from the Angular
DOM schema as well as any components (or directives with element selectors)
that are in scope within the template as options for completion.
PR Close#40032
This commit extends the template targeting system, which determines the node
being referenced given a template position, to return additional context if
needed about the particular aspect of the node to which the position refers.
For example, a position pointing to an element node may be pointing either
to its tag name or to somewhere in the node body. This is the difference
between `<div|>` and `<div foo | bar>`.
PR Close#40032
The vim editor produces temporarily files that can end in both .swo and
.swp. This commits add .swp to the .gitignore so we don't accidentaly
commit temporary files.
PR Close#40094
The `deploy-to-firebase.js` tests rely on git info retrieved from the
`angular/angular` repository (via `git ls-remote ...`).
Previously, different calls to `git ls-remote ...` could return
different values if a new commit was pushed or a new branch was created
during test execution, resulting in errors ([example CI failure][1]).
This commit makes the tests more stable by memoizing the result of
`git ls-remote ...` and returning the same result for subsequent calls
with the same arguments (even if meanwhile the remote has been updated).
[1]: https://circleci.com/gh/angular/angular/877626
PR Close#40088
Angular has stopped to support browser that requires these CSS properties.
All supported browsers support standard CSS properties:
* @keyframes rule
* animation
PR Close#40084
Kristiyan Kostadinov
Pete Bacon Darwin
Andrew Scott
JoostK
Misko Hevery
George Kalpakas
Amadou Sall
Alexey Elin
Aristeidis Bampakos
Hadrien TOMA
Troels Lenda
Alan Agius
Andrew Kushnir
Tasos Alexiou
Joey Perrott
Stepan Suvorov
Zach Arend
Alex Rickabaugh