Non-wild-card path-mappings were not being matched correctly.
Further path-mapped secondary entry-points that
were imported from the associated primary entry-point were not
being martched correctly.
Fixes#31274
PR Close#31450
Adds the new `classMapInterpolate1` through `classMapInterpolate8` instructions which handle interpolations inside the `class` attribute and moves the interpolation logic internally. This allows us to remove the `interpolationX` instructions in a follow-up PR.
These changes also add an error if an interpolation is encountered inside a `style` tag (e.g. `style="width: {{value}}"`). Up until now this would actually generate valid instructions, because `styleMap` goes through the same code path as `classMap` which does support interpolation. At runtime, however, `styleMap` would set invalid styles that look like `<div style="0:w;1:i;2:d;3:t;4:h;5::;7:1;">`. In `ViewEngine` interpolations inside `style` weren't supported either, however there we'd output invalid styles like `<div style="unsafe">`, even if the content was trusted.
PR Close#31211
When a class uses Angular decorators such as `@Input`, `@Output` and
friends without an Angular class decorator, they are compiled into a
static `ngBaseDef` field on the class, with the TypeScript declaration
of the class being altered to declare the `ngBaseDef` field to be of type
`ɵɵBaseDef`. This type however requires a generic type parameter that
corresponds with the type of the class, however the compiler did not
provide this type parameter. As a result, compiling a program where such
invalid `ngBaseDef` declarations are present will result in compilation
errors.
This commit fixes the problem by providing the generic type parameter.
Fixes#31160
PR Close#31210
Some formats of CommonJS put the decorator helper calls
outside the class IIFE as statements on the top level of the
source file.
This commit adds support to the `CommonJSReflectionHost`
for this format.
PR Close#31335
Adds chaining to the `property`, `attribute` and `updateSyntheticHostBinding` instructions when they're used in a host binding.
This PR resolves FW-1404.
PR Close#31296
The TS compiler is likely to test paths with extensions and try to
load them as files. Therefore `fileExists()` and methods that rely
on it need to be able to distinguish between real files and directories
that have paths that look like files.
This came up as a bug in ngcc when trying to process `ngx-virtual-scroller`,
which relies upon a library called `@tweenjs/tween.js`.
PR Close#31289
If an entry-point has missing dependencies then it cannot be
processed and is marked as invalid. Similarly, if an entry-point
has dependencies that have been marked as invalid then that
entry-point too is invalid. In all these cases, ngcc should quietly
ignore these entry-points and continue processing what it can.
Previously, if an entry-point had more than one entry-point that
was transitively invalid then ngcc was crashing rather than
ignoring the entry-point.
PR Close#31276
Our module resolution prefers `.js` files over `.d.ts` files because
occasionally libraries publish their typings in the same directory
structure as the compiled JS files, i.e. adjacent to each other.
The standard TS module resolution would pick up the typings
file and add that to the `ts.Program` and so they would be
ignored by our analyzers. But we need those JS files, if they
are part of the current package.
But this meant that we also bring in JS files from external
imports from outside the package, which is not desired.
This was happening for the `@fire/storage` enty-point
that was importing the `firebase/storage` path.
In this commit we solve this problem, for the case of imports
coming from a completely different package, by saying that any
file that is outside the package root directory must be an external
import and so we do not analyze those files.
This does not solve the potential problem of imports between
secondary entry-points within a package but so far that does
not appear to be a problem.
PR Close#30591
Rather than passing a number of individual arguments, we can
just pass an `EntryPointBundle`, which already contains them.
This is also a precursor to using more of the properties in the bundle.
PR Close#30591
This will allow users of the `EntryPointBundle` to use some of the `EntryPoint`
properties without us having to pass them around one by one.
PR Close#30591
Previously we expected the constructor parameter `decorators`
property to be an array wrapped in a function. Now we also support
an array not wrapped in a function.
PR Close#30591
Some packages do not actually provide a `typings` field in their
package.json. But TypeScript naturally infers the typings file from
the location of the JavaScript source file.
This commit modifies ngcc to do a similar inference when finding
entry-points to process.
Fixes#28603 (FW-1299)
PR Close#30591
There are scenarios where it is not possible for ngcc to guess the format
or configuration of an entry-point just from the files on disk.
Such scenarios include:
1) Unwanted entry-points: A spurious package.json makes ngcc think
there is an entry-point when there should not be one.
2) Deep-import entry-points: some packages allow deep-imports but do not
provide package.json files to indicate to ngcc that the imported path is
actually an entry-point to be processed.
3) Invalid/missing package.json properties: For example, an entry-point
that does not provide a valid property to a required format.
The configuration is provided by one or more `ngcc.config.js` files:
* If placed at the root of the project, this file can provide configuration
for named packages (and their entry-points) that have been npm installed
into the project.
* If published as part of a package, the file can provide configuration
for entry-points of the package.
The configured of a package at the project level will override any
configuration provided by the package itself.
PR Close#30591
Previously each test relied on large shared mock file-systems, which
makes it difficult to reason about what is actually being tested.
This commit breaks up these big mock file-systems into smaller more
focused chunks.
PR Close#30591
To improve cross platform support, all file access (and path manipulation)
is now done through a well known interface (`FileSystem`).
For testing a number of `MockFileSystem` implementations are provided.
These provide an in-memory file-system which emulates operating systems
like OS/X, Unix and Windows.
The current file system is always available via the static method,
`FileSystem.getFileSystem()`. This is also used by a number of static
methods on `AbsoluteFsPath` and `PathSegment`, to avoid having to pass
`FileSystem` objects around all the time. The result of this is that one
must be careful to ensure that the file-system has been initialized before
using any of these static methods. To prevent this happening accidentally
the current file system always starts out as an instance of `InvalidFileSystem`,
which will throw an error if any of its methods are called.
You can set the current file-system by calling `FileSystem.setFileSystem()`.
During testing you can call the helper function `initMockFileSystem(os)`
which takes a string name of the OS to emulate, and will also monkey-patch
aspects of the TypeScript library to ensure that TS is also using the
current file-system.
Finally there is the `NgtscCompilerHost` to be used for any TypeScript
compilation, which uses a given file-system.
All tests that interact with the file-system should be tested against each
of the mock file-systems. A series of helpers have been provided to support
such tests:
* `runInEachFileSystem()` - wrap your tests in this helper to run all the
wrapped tests in each of the mock file-systems.
* `addTestFilesToFileSystem()` - use this to add files and their contents
to the mock file system for testing.
* `loadTestFilesFromDisk()` - use this to load a mirror image of files on
disk into the in-memory mock file-system.
* `loadFakeCore()` - use this to load a fake version of `@angular/core`
into the mock file-system.
All ngcc and ngtsc source and tests now use this virtual file-system setup.
PR Close#30921
Prior to this commit, the logic to extract query information from class fields used an instance of regular Error class to throw an error. As a result, some useful information (like reference to a specific field) was missing. Replacing Error class with FatalDiagnosticError one makes the error more verbose that should simplify debugging.
PR Close#31123
Add an IndexingContext class to store indexing information and a
transformer module to generate indexing analysis. Integrate the indexing
module with the rest of NgtscProgram and add integration tests.
Closes#30959
PR Close#31151
Previously, the usage of equality operators ==, ===, != and !== was not
supported in ngtsc's static interpreter. This commit adds support for
such operators and includes tests.
Fixes#31076
PR Close#31145
Optimizations to skip compiling source files that had not changed
did not account for the case where only a resource file changes,
such as an external template or style file.
Now we track such dependencies and trigger a recompilation
if any of the previously tracked resources have changed.
This will require a change on the CLI side to provide the list of
resource files that changed to trigger the current compilation by
implementing `CompilerHost.getModifiedResourceFiles()`.
Closes#30947
PR Close#30954
This commit fixes a couple of issues with TS 3.5 compatibility in order to
unblock migration of g3. Mostly 'any's are added, and there are no behavior
changes.
PR Close#31174
A temporary check is in place to determine whether a key in an object
literal needs to be quoted during emit. Previously, only the presence of
a dash caused a key to become quoted, this however is not sufficient for
@angular/flex-layout to compile properly as it has dots in its inputs.
This commit extends the check to also use quotes when a dot is present.
Fixes#30114
PR Close#31146
Currently each property binding generates an instruction like this:
```
property('prop1', ctx.value1);
property('prop2', ctx.value2);
```
The problem is that we're repeating the call to `property` for each of the properties. Since the `property` instruction returns itself, we can chain all of the calls which is more compact and it looks like this:
```
property('prop1', ctx.value1)('prop2', ctx.value2);
```
These changes implement the chaining behavior for regular property bindings and for synthetic ones, however interpolated ones are still handled like before, because they use a separate instruction.
This PR resolves FW-1389.
PR Close#31078
Add support for indexing of property reads, method calls in a template.
Visit AST of template syntax expressions to extract identifiers.
Child of #30959
PR Close#30963
i18nExp now uses `bind` internally rather than having the compiler generate it in order to bring it in line with other functions like `textBinding` & `property`.
FW-1384 #resolve
PR Close#31089
Packages that have been compiled using an older version of TypeScript
can have their decorators at the top-level of the ES5 bundles, instead
of inside the IIFE that is emitted for the class. Before this change,
ngcc only took static property assignments inside the IIFE into account,
therefore missing the decorators that were assigned at the top-level.
This commit extends the ES5 host to look for static properties in two
places. Testcases for all bundle formats that contain ES5 have been added
to ensure that this works in the various flavours.
A patch is included to support UMD bundles. The UMD factory affects how
TypeScripts binds the static properties to symbols, see the docblock of
the patch function for more details.
PR Close#30795
The `EntryPointFinder` computes the base paths to consider
when searching for entry-points. When there are `pathMappings`
provided it works out the best top level base-paths that cover all
the potential mappings.
If this computed basePath happens to coincide with an entry-point
path itself then we were missing it.
Now we check for an entry-point even at the base-path itself.
Related to https://github.com/angular/angular-cli/pull/14755
PR Close#31027
Commit 58be2ff884 has been created
before c0386757b1 landed, and therefore
the newly created compliance test was using an outdated expectation.
This commit updates the compliance test to no longer contain
the outdated expectation.
PR Close#30983
To provide some context: The implicit receiver is part of the
parsed Angular template AST. Any property reads in bindings,
interpolations etc. read from a given object (usually the component
instance). In that case there is an _implicit_ receiver which can also
be specified explicitly by just using `this`.
e.g.
```html
<ng-template>{{this.myProperty}}</ng-template>
```
This works as expected in Ivy and View Engine, but breaks in case the
implicit receiver is not used for property reads. For example:
```html
<my-dir [myFn]="greetFn.bind(this)"></my-dir>
```
In that case the `this` will not be properly translated into the generated
template function code because the Ivy compiler currently always treats
the `ctx` variable as the implicit receiver. This is **not correct** and breaks
compatibility with View Engine. Rather we need to ensure that we retrieve
the root context for the standalone implicit receiver similar to how it works
for property reads (as seen in the example above with `this.myProperty`)
Note that this requires some small changes to the `expression_converter`
because we only want to generate the `eenextContent()` instruction if the
implicit receiver is _actually_ used/needed. View Engine determines if that is the case by recursively walking through the converted output AST and
checking for usages of the `o.variable('_co')` variable ([see here][ve_check]). This would work too for Ivy, but involves most likely more code duplication
since templates are isolated in different functions and it another pass
through the output AST for every template expression.
[ve_check]: 0d6c9d36a1/packages/compiler/src/view_compiler/view_compiler.ts (L206-L208)
Resolves FW-1366.
PR Close#30897
9d9c9e43e5 has been created a few days ago
and wasn't rebased on top of recent changes that introduces a commonjs host.
This means that tests for the commonjs host haven't been updated to work with
the changes from from #30492 and now fail in `master`.
PR Close#30967
Currently undecorated classes are intentionally not processed
with ngcc. This is causing unexpected behavior because decorator
handlers such as `base_def.ts` are specifically interested in class
definitions without top-level decorators, so that the base definition
can be generated if there are Angular-specific class members.
In order to ensure that undecorated base-classes work as expected
with Ivy, we need to run the decorator handlers for all top-level
class declarations (not only for those with decorators). This is similar
to when `ngtsc` runs decorator handlers when analyzing source-files.
Resolves FW-1355. Fixes https://github.com/angular/components/issues/16178
PR Close#30821
When determining the module type of a bundle pointed to by the "main"
property, ngcc needs to read the bundle to figure out if it is CommonJS
or UMD format. However, when the "main" property does not exist ngcc
would crash while determining the path to the main bundle file.
This commit fixes the crash by checking if the "main" property is present
at all, before attempting to derive a full path to the bundle file.
Fixes#30916
Fixes FW-1369
PR Close#30950
The usage of array spread syntax in source code may be downleveled to a
call to TypeScript's `__spread` helper function from `tslib`, depending
on the options `downlevelIteration` and `emitHelpers`. This proves
problematic for ngcc when it is processing ES5 formats, as the static
evaluator won't be able to interpret those calls.
A custom foreign function resolver is not sufficient in this case, as
`tslib` may be emitted into the library code itself. In that case, a
helper function can be resolved to an actual function with body, such
that it won't be considered as foreign function. Instead, a reflection
host can now indicate that the definition of a function corresponds with
a certain TypeScript helper, such that it becomes statically evaluable
in ngtsc.
Resolves#30299
PR Close#30492
- Refactors compiler to stop generating `ɵɵselect(0)` instructions
- Alters template execution to always call the equivalent of `ɵɵselect(0)` before running a template in update mode
- Updates tests to not check for or call `ɵɵselect(0)`.
The goal here is to reduce the size of generated templates
PR Close#30830
Fixes Ivy throwing an error if it runs into an empty property binding on an `ng-template` (e.g. `<ng-template [something]=""></ng-template>`) by not generating an update instruction for it.
Fixes#30801.
This PR resoves FW-1356.
PR Close#30829
When ngcc processes an entrypoint, it updates `package.json` with
metadata about the processed format. Previously, it overwrote the
`package.json` with the stringified JSON object without spaces. This
made the file difficult to read (for example when looking at the file
while debugging an ngcc failure).
This commit fixes it by using spaces in the new `package.json` content.
PR Close#30831
- Removes ɵɵelementProperty instruction
- Updates tests that were using it
- NOTE: There is one test under `render3/integration_spec.ts` that is commented out, and needs to be reviewed. Basically, I could not find a good why to test what it was doing, because it was doing things that I am not sure we could generate in an acceptance test.
PR Close#30645
When an `ng-template` element has a variable declaration without a value,
it is assigned the value of the `$implicit` property in the embedded view's
context. The template compiler inserts a property access to `$implicit` for
template variables without a value, however the type-check code generation
logic did not. This resulted in incorrect type-checking code being generated.
Fixes FW-1326
PR Close#30675
Some HTML attributes don't correspond to their DOM property name, in which
case the runtime will apply the appropriate transformation when assigning
a property using its attribute name. One example of this is the `for`
attribute, for which the DOM property is named `htmlFor`.
The type-checking machinery in ngtsc must also take this mapping into
account, as it generates type-check code in which unclaimed property bindings
are assigned to properties of (subtypes of) `HTMLElement`.
Fixes#30607
Fixes FW-1327
PR Close#30675
With View engine it was possible to declare multiple projection
definitions and to programmatically project nodes into the slots.
e.g.
```html
<ng-content></ng-content>
<ng-content></ng-content>
```
Using `ViewContainerRef#createComponent` allowed projecting
nodes into one of the projection defs (through index)
This no longer works with Ivy as the `projectionDef` instruction only
retrieves a list of selectors instead of also retrieving entries for
reserved projection slots which appear when using the default
selector multiple times (as seen above).
In order to fix this issue, the Ivy compiler now passes all
projection slots to the `projectionDef` instruction. Meaning that
there can be multiple projection slots with the same wildcard
selector. This allows multi-slot projection as seen in the
example above, and it also allows us to match the multi-slot node
projection order from View Engine (to avoid breaking changes).
It basically ensures that Ivy fully matches the View Engine behavior
except of a very small edge case that has already been discussed
in FW-886 (with the conclusion of working as intended).
Read more here: https://hackmd.io/s/Sy2kQlgTE
PR Close#30561
`i18nAttributes` instructions always occur after the element instruction. This means that we need to treat `i18n-` attributes differently.
By defining a specific `AttributeMarker` we can ensure that we won't trigger directive inputs with untranslated attribute values.
FW-1332 #resolve
PR Close#30402
Changed runtime i18n to define attributes with bindings, or matching directive inputs/outputs as element properties as we are supposed to do in Angular.
This PR fixes the issue where directive inputs wouldn't be trigged.
FW-1315 #resolve
PR Close#30402
The R3TargetBinder "binds" an Angular template AST, computing semantic
information regarding the template and making it accessible.
One of the binding passes previously had a bug, where for the following
template:
<div *ngIf="foo as foo"></div>
which desugars to:
<ng-template ngIf [ngIf]="foo" let-foo="ngIf">
<div></div>
</ng-template>
would have the `[ngIf]` binding processed twice - in both the scope which
contains the `<ng-template>` and the scope inside the template. The bug
arises because during the latter, `foo` is a variable defined by `let-foo`,
and so the R3TargetBinder would incorrectly learn that `foo` inside `[ngIf]`
maps to that variable.
This commit fixes the bug by only processing inputs, outputs, and
templateAttrs from `Template`s in the outer scope.
PR Close#30669
Prior to this commit there were no explicit types setup for NgModuleFactory calls in ngfactories, so TypeScript inferred the type based on a given call. In some cases (when generic types were used for Components/Directives) that turned out to be problematic, so we add explicit typing for NgModuleFactory calls.
PR Close#30708
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
This patch is one of the final patches to refactor the styling algorithm
to be more efficient, performant and less complex.
This patch enables sanitization support for map-based and prop-based
style bindings.
PR Close#30667
This commit makes the static flag on @ViewChild and @ContentChild required.
BREAKING CHANGE:
In Angular version 8, it's required that all @ViewChild and @ContentChild
queries have a 'static' flag specifying whether the query is 'static' or
'dynamic'. The compiler previously sorted queries automatically, but in
8.0 developers are required to explicitly specify which behavior is wanted.
This is a temporary requirement as part of a migration; see
https://angular.io/guide/static-query-migration for more details.
@ViewChildren and @ContentChildren queries are always dynamic, and so are
unaffected.
PR Close#30639
The AbsoluteModuleStrategy in ngtsc assumed that the source code is
formatted as TypeScript with regards to module exports.
In ngcc this is not always the case, so this commit changes
`AbsoluteModuleStrategy` so that it relies upon a `ReflectionHost` to
compute the exports of a module.
PR Close#30200
Prior to this change we processed binding expression (including bindings with pipes) in i18n attributes before we generate update instruction. As a result, slot offsets for pipeBind instructions were calculated incorrectly. Now we perform binding expression processing when we generate "update block" instructions, so offsets are calculated correctly.
PR Close#30573
Currently the `@angular/compiler-cli` compliance tests sometimes do
not throw an exception if the expected output does not match the
generated JavaScript output. This can happen for the following cases:
1. Expected code includes character that is not part of known alphabet
(e.g. `Δ` is still used in a new compliance test after rebasing a PR)
2. Expected code asserts that a string literal matches a string with
escaped quotes. e.g. expects `const $var$ = "\"quoted\"";`)
PR Close#30597
There is an encoding issue with using delta `Δ`, where the browser will attempt to detect the file encoding if the character set is not explicitly declared on a `<script/>` tag, and Chrome will find the `Δ` character and decide it is window-1252 encoding, which misinterprets the `Δ` character to be some other character that is not a valid JS identifier character
So back to the frog eyes we go.
```
__
/ɵɵ\
( -- ) - I am ineffable. I am forever.
_/ \_
/ \ / \
== == ==
```
PR Close#30546
Previously we defensively wrapped expressions in case they ran afoul of
precedence rules. For example, it would be easy to create the TS AST structure
Call(Ternary(a, b, c)), but might result in printed code of:
```
a ? b : c()
```
Whereas the actual structure we meant to generate is:
```
(a ? b : c)()
```
However the TypeScript renderer appears to be clever enough to provide
parenthesis as necessary.
This commit removes these defensive paraenthesis in the cases of binary
and ternary operations.
FW-1273
PR Close#30349
Previously, interpolations were generated into TCBs as a comma-separated
list of expressions, letting TypeScript infer the type of the expression
as the type of the last expression in the chain. This is undesirable, as
interpolations always result in a string type at runtime. Therefore,
type-checking of bindings such as `<img src="{{ link }}"/>` where `link`
is an object would incorrectly report a type-error.
This commit adjusts the emitted TCB code for interpolations, where a
chain of string concatenations is emitted, starting with the empty string.
This ensures that the inferred type of the interpolation is of type string.
PR Close#30177
Previously we were relying upon the `.get()` method to return `undefined`
but it is clearer and safer to always check with `.has()` first.
PR Close#25445
Previously the same `Renderer` was used to render typings (.d.ts)
files. But the new `UmdRenderer` is not able to render typings files
correctly.
This commit splits out the typings rendering from the src rendering.
To achieve this the previous renderers have been refactored from
sub-classes of the abstract `Renderer` class to classes that implement
the `RenderingFormatter` interface, which are then passed to the
`Renderer` and `DtsRenderer` to modify its rendering behaviour.
Along the way a few utility interfaces and classes have been moved
around and renamed for clarity.
PR Close#25445
In some cases the `forwardRef` helper has been imported via a namespace,
e.g. `core.forwardRef(...)`.
This commit adds support for unwrapping such namespaced imports when
ngtsc is statically evaluating code.
PR Close#25445
Previously these fake files were full TypeScript source
files (`.ts`) but this is not necessary as we only need the
typings not the implementation.
PR Close#25445
Previously we were using an anonymous type `{specifier: string; qualifier: string;}`
throughout the code base. This commit gives this type a name and ensures it
is only defined in one place.
PR Close#25445
Previously, ngtsc would fail to evaluate expressions that access properties
from e.g. the `window` object. This resulted in hard to debug error messages
as no indication on where the problem originated was present in the output.
This commit cleans up the handling of unknown property accesses, such that
evaluating such expressions no longer fail but instead result in a `DynamicValue`.
Fixes#30226
PR Close#30247
A structural directive can specify a template guard for an input, such that
the type of that input's binding can be narrowed based on the guard's return
type. Previously, such template guards could only be methods, of which an
invocation would be inserted into the type-check block (TCB). For `NgIf`,
the template guard narrowed the type of its expression to be `NonNullable`
using the following declaration:
```typescript
export declare class NgIf {
static ngTemplateGuard_ngIf<E>(dir: NgIf, expr: E): expr is NonNullable<E>
}
```
This works fine for usages such as `*ngIf="person"` but starts to introduce
false-positives when e.g. an explicit non-null check like
`*ngIf="person !== null"` is used, as the method invocation in the TCB
would not have the desired effect of narrowing `person` to become
non-nullable:
```typescript
if (NgIf.ngTemplateGuard_ngIf(directive, ctx.person !== null)) {
// Usages of `ctx.person` within this block would
// not have been narrowed to be non-nullable.
}
```
This commit introduces a new strategy for template guards to allow for the
binding expression itself to be used as template guard in the TCB. Now,
the TCB generated for `*ngIf="person !== null"` would look as follows:
```typescript
if (ctx.person !== null) {
// This time `ctx.person` will successfully have
// been narrowed to be non-nullable.
}
```
This strategy can be activated by declaring the template guard as a
property declaration with `'binding'` as literal return type.
See #30235 for an example where this led to a false positive.
PR Close#30248
Preserve compatibility with rollup_bundle rule.
Add missing npm dependencies, which are now enforced by the strict_deps plugin in tsc_wrapped
PR Close#30370
At the moment the module resolver will end up in an infinite loop in Windows because we are assuming that the root directory is always `/` however in windows this can be any drive letter example `c:/` or `d:/` etc...
With this change we also resolve the drive letter in windows, when using `AbsoluteFsPath.from` for consistence so under `/foo` will be converted to `c:/foo` this is also needed because of relative paths with different drive letters.
PR Close#30297
Currently in Ivy `NgModule` registration happens when the class is declared, however this is inconsistent with ViewEngine and requires extra generated code. These changes remove the generated code for `registerModuleFactory`, pass the id through to the `ngModuleDef` and do the module registration inside `NgModuleFactory.create`.
This PR resolves FW-1285.
PR Close#30244
```
//packages/compiler-cli/test:ngc
//packages/compiler/test:test
```
This also address `node_modules` to the ignored paths for ngc compiler as otherwise the `ready` is never fired
Partially addresses #29785
PR Close#30146
Now that the dependent files and compilation scopes are being tracked in
the incremental state, we can skip analysing and emitting source files if
none of their dependent files have changed since the last compile.
The computation of what files (and their dependencies) are unchanged is
computed during reconciliation.
This commit also removes the previous emission skipping logic, since this
approach covers those cases already.
PR Close#30238
To support skipping analysis of a file containing a component
we need to know that none of the declarations that might affect
its ngtsc compilation have not changed. The files that we need to
check are those that contain classes from the `CompilationScope`
of the component. These classes are already tracked in the
`LocalModuleScopeRegistry`.
This commit modifies the `IvyCompilation` class to record the
files that are in each declared class's `CompilationScope` via
a new method, `recordNgModuleScopeDependencies()`, that is called
after all the handlers have been "resolved".
Further, if analysis is skipped for a declared class, then we need
to recover the analysis from the previous compilation run. To
support this, the `IncrementalState` class has been updated to
expose the `MetadataReader` and `MetadataRegistry` interfaces.
This is included in the `metaRegistry` object to capture these analyses,
and also in the `localMetaReader` as a fallback to use if the
current compilation analysis was skipped.
PR Close#30238
As part of incremental compilation performance improvements, we need
to track the dependencies of files due to expressions being evaluated by
the `PartialEvaluator`.
The `PartialEvaluator` now accepts a `DependencyTracker` object, which is
used to track which files are visited when evaluating an expression.
The interpreter computes this `originatingFile` and stores it in the evaluation
`Context` so it can pass this to the `DependencyTracker.
The `IncrementalState` object implements this interface, which allows it to be
passed to the `PartialEvaluator` and so capture the file dependencies.
PR Close#30238
This is the final patch to migrate the Angular styling code to have a
smaller instruction set in preparation for the runtime refactor. All
styling-related instructions now work both in template and hostBindings
functions and do not use `element` as a prefix for their names:
BEFORE:
elementStyling()
elementStyleProp()
elementClassProp()
elementStyleMap()
elementClassMap()
elementStylingApply()
AFTER:
styling()
styleProp()
classProp()
styleMap()
classMap()
stylingApply()
PR Close#30318
This patch removes all host-specific styling instructions in favor of
using element-level instructions instead. Because of the previous
patches that made sure `select(n)` worked between styling calls, all
host level instructions are not needed anymore. This patch changes each
of those instruction calls to use any of the `elementStyling*`,
`elementStyle*` and `elementClass*` styling instructions instead.
PR Close#30336
This patch is one commit of many patches that will unify all styling instructions
across both template-level bindings and host-level bindings. This patch in particular
removes the `elementIndex` param because it is already set prior to each styling
instruction via the `select(n)` instruction.
PR Close#30313
Prior to this patch, the `select(n)` instruction would only be generated
when property bindings are encountered which meant that styling-related
bindings were skipped. This patch ensures that all styling-related bindings
(i.e. class and style bindings) are always prepended with a `select()`
instruction prior to being generated in AOT.
PR Close#30311
This patch breaks up the existing `elementStylingMap` into
`elementClassMap` and `elementStyleMap` instructions. It also breaks
apart `hostStlyingMap` into `hostClassMap` and `hostStyleMap`
instructions. This change allows for better tree-shaking and reduces
the complexity of the styling algorithm code for `[style]` and `[class]`
bindings.
PR Close#30293
If an entry-point has a missing dependency then all the entry-points
that would have pointed to that dependency are also removed from
the dependency graph.
Previously we were still processing the dependencies of an entry-point
even if it had already been removed from the graph because it depended
upon a missing dependency that had previously been removed due to another
entry-point depending upon it.
This caused the dependency processing to crash rather than gracefully
logging and handling the missing invalid entry-point.
Fixes#29624
PR Close#30270
Sometimes we need to override module resolution behaviour.
We do this by implementing the optional method `resolveModuleNames()`
on `CompilerHost`.
This commit ensures that we always try this method first before falling
back to the standard `ts.resolveModuleName`
PR Close#30017
Packages that do not follow APF may have the declaration files in the same
directory as one source format, typically ES5. This is problematic for ngcc,
as it needs to create a TypeScript program with all JavaScript sources of
an entry-point, whereas TypeScript's module resolution mechanism would have
resolved an internal module import to the external facing .d.ts declaration
file, instead of the JavaScript source file. This behavior results in the
program to be analysed being incomplete.
This commit introduces a custom compiler host that recognizes the above
scenario and rewires the resolution of a .d.ts declaration file to its
JavaScript counterpart, if applicable.
Fixes#29939
PR Close#30017
Fixes `HostBinding` and `HostListener` declarations not being inherited from base classes that don't have an Angular decorator.
This PR resolves FW-1275.
PR Close#30158
This commit introduces a new interface, which abstracts access
to the underlying `FileSystem`. There is initially one concrete
implementation, `NodeJsFileSystem`, which is simply wrapping the
`fs` library of NodeJs.
Going forward, we can provide a `MockFileSystem` for test, which
should allow us to stop using `mock-fs` for most of the unit tests.
We could also implement a `CachedFileSystem` that may improve the
performance of ngcc.
PR Close#29643
By passing a `pathMappings` configuration (a subset of the
`ts.CompilerOptions` interface), we can instuct ngcc to process
additional paths outside the `node_modules` folder.
PR Close#29643
When working out the dependencies between entry-points
ngcc must parse the import statements and then resolve the
import path to the actual file. This is complicated because module
resolution is not trivial.
Previously ngcc used the node.js `require.resolve`, with some
hacking to resolve modules. This change refactors the `DependencyHost`
to use a new custom `ModuleResolver`, which is optimized for this use
case.
Moreover, because we are in full control of the resolution,
we can support TS `paths` aliases, where not all imports come from
`node_modules`. This is the case in some CLI projects where there are
compiled libraries that are stored locally in a `dist` folder.
See //FW-1210.
PR Close#29643
Previously we completely ignored entry-points that had not been
compiled with Angular, since we do not need to compile them
with ngcc. But this makes it difficult to reason about dependencies
between entry-points that were compiled with Angular and those that
were not.
Now we do track these non-Angular compiled entry-points but they
are marked as `compiledByAngular: false`.
PR Close#29643
The test now attempts to compile an entry-point (@angular/common/http/testing)
that has a transient "private" dependency. A private dependency is one that is
only visible by looking at the compiled JS code, rather than the generated TS
typings files.
This proves that we can't rely on typings files alone for computing the
dependencies between entry-points.
PR Close#29643
The `Transformer` and `Renderer` classes do not
actually need a `sourcePath` value as by the time
they are doing their work we are only working directly
with full absolute paths.
PR Close#29643
- Extracts and documents code that will be common to interpolation instructions
- Ensures that binding indices are updated at the proper time during compilation
- Adds additional tests
Related #30011
PR Close#30129
Previously, ngtsc included query fields in the list of fields which can
affect the type of a directive via its type constructor. This feature
however has yet to be built, and View Engine in default mode does not
do this inference.
This caused an unexpected bug where private query fields (which should be
an error but are allowed by View Engine) cause the type constructor
signature to be invalid. This commit fixes that issue by disabling the
logic to include query fields.
PR Close#30094
ngtsc generates type constructors which infer the type of a directive based
on its inputs. Previously, a bug existed where this inference would fail in
the case of 'any' input values. For example, the inference of NgForOf fails
when an 'any' is provided, as it causes TypeScript to attempt to solve:
T[] = any
In this case, T gets inferred as {}, the empty object type, which is not
desirable.
The fix is to assign generic types in type constructors a default type of
'any', which TypeScript uses instead of {} when inference fails.
PR Close#30094
ngtsc previously could attempt to reuse the main ts.Program twice. This
occurred when template type-checking was enabled and then an incremental
build was performed. This breaks a TypeScript invariant - ts.Programs can
only be reused once.
The creation of the template type-checking program reuses the main program,
rendering it moot. Then, on the next incremental build the main program
would be subject to reuse again, which would crash inside TypeScript.
This commit fixes the issue by reusing the template type-checking program
from the previous run on the next incremental build. Since under normal
circumstances the files in the type-checking program aren't changed, this
should be just as fast.
Testing strategy: a test is added in the incremental_spec which validates
that program reuse with type-checking turned on does not crash the compiler.
Fixes#30079
PR Close#30090
Only the JS files that are actually part of the entry-point
should be copied to the new entry-point folder in the
`NewEntryPointFileWriter`.
Previously some typings and external JS files were
being copied which was messing up the node_modules
structure.
Fixes https://github.com/angular/angular-cli/issues/14193
PR Close#30085
Fixes view and content queries not being inherited in Ivy, if the base class hasn't been annotated with an Angular decorator (e.g. `Component` or `Directive`).
Also reworks the way the `ngBaseDef` is created so that it is added at the same point as the queries, rather than inside of the `Input` and `Output` decorators.
This PR partially resolves FW-1275. Support for host bindings will be added in a follow-up, because this PR is somewhat large as it is.
PR Close#30015
Prior to this commit, the check that verifies correct "id" field type was too strict and didn't allow `module.id` as @NgModule's "id" field value. This change adds a special handling for `module.id` and uses it as id of @NgModule if specified.
PR Close#30040
Now that ngtsc performs type checking using a dedicated `__ng_typecheck__.ts`
file, `NgtscProgram` always wraps its `ts.CompilerHost` in a shim host. This
shim fails to delegate `resolveModuleNames` so no custom module resolution
logic is considered. This introduces a problem for the CLI, as the compiler
host it passes kicks of ngcc for any imported module such that Ivy's
compatibility compiler runs automatically behind the scenes.
This commit adds delegation of the `resolveModuleNames` to fix the issue.
Fixes#30064
PR Close#30068
The compiler uses metadata to represent what it statically knows about
various expressions in a program. Occasionally, expressions in the program
for which metadata is extracted may contain sub-expressions which are not
representable in metadata. One such construct is an arrow function.
The compiler does not always need to understand such expressions completely.
For example, for a provider defined with `useValue`, the compiler does not
need to understand the value at all, only the outer provider definition. In
this case, the compiler employs a technique known as "expression lowering",
where it rewrites the provider expression into one that can be represented
in metadata. Chiefly, this involves extracting out the dynamic part (the
`useValue` expression) into an exported constant.
Lowering is applied through a heuristic, which considers the containing
statement as well as the field name of the expression.
Previously, this heuristic was not completely accurate in the case of
route definitions and the `loadChildren` field, which is lowered. If the
route definition using `loadChildren` existed inside a decorator invocation,
lowering was performed correctly. However, if it existed inside a standalone
variable declaration with an export keyword, the heuristic would conclude
that lowering was unnecessary. For ordinary providers this is true; however
the compiler attempts to fully understand the ROUTES token and thus even if
an array of routes is declared in an exported variable, any `loadChildren`
expressions within still need to be lowered.
This commit enables lowering of already exported variables under a limited
set of conditions (where the initializer expression is of a specific form).
This should enable the use of `loadChildren` in route definitions.
PR Close#30038
Previously, a template's context name would only be included in an embedded
template function if the element that the template was declared on has a
tag name. This is generally true for elements, except for `ng-content`
that does not have a tag name. By omitting the context name the compiler
could introduce duplicate template function names, which would fail at runtime.
This commit fixes the behavior by always including the context name in the
template function's name, regardless of tag name.
Resolves FW-1272
PR Close#30025
Previously, ngcc would insert new imports at the beginning of the file, for
convenience. This is problematic for imports that have side-effects, as the
side-effects imposed by such imports may affect the behavior of subsequent
imports.
This commit teaches ngcc to insert imports after any existing imports. Special
care has been taken to ensure inserted constants will still follow after the
inserted imports.
Resolves FW-1271
PR Close#30029
Fixes Ivy throwing an error because it tries to generate styling instructions for empty `style` and `class` bindings.
This PR resolves FW-1274.
PR Close#30024
Previously, all of a program's files would be copied into the __ivy_ngcc__
folder where ngcc then writes its modifications into. The set of source files
in a program however is much larger than the source files contained within
the entry-point of interest, so many more files were copied than necessary.
Even worse, it may occur that an unrelated file in the program would collide
with an already existing source file, resulting in incorrectly overwriting
a file with unrelated content. This behavior has actually been observed
with @angular/animations and @angular/platform-browser/animations, where
the former package would overwrite declaration files of the latter package.
This commit fixes the issue by only copying relevant source files when cloning
a bundle's content into __ivy_ngcc__.
Fixes#29960
PR Close#30020
Previously, during the evaluation of a function call where no argument
was provided for a parameter that has a default value, the default value
would be taken from the context of the caller, instead of the callee.
This commit fixes the behavior by resolving the default value of a
parameter in the context of the callee.
PR Close#29888
Previously, ngtsc's static evaluator did not take spread operators into
account when evaluating function calls, nor did it handle rest arguments
correctly. This commit adds support for static evaluation of these
language features.
PR Close#29888
Template type-checking is enabled by default in the View Engine compiler.
The feature in Ivy is not quite ready for this yet, so this flag will
temporarily control whether templates are type-checked in ngtsc.
The goal is to remove this flag after rolling out template type-checking in
google3 in Ivy mode, and making sure the feature is as compatible with the
View Engine implementation as possible.
Initially, the default value of the flag will leave checking disabled.
PR Close#29698
Previously, Template.templateAttrs was introduced to capture attribute
bindings which originated from microsyntax (e.g. bindings in *ngFor="...").
This means that a Template node can have two different structures, depending
on whether it originated from microsyntax or from a literal <ng-template>.
In the literal case, the node behaves much like an Element node, it has
attributes, inputs, and outputs which determine which directives apply.
In the microsyntax case, though, only the templateAttrs should be used
to determine which directives apply.
Previously, both the t2_binder and the TemplateDefinitionBuilder were using
the wrong set of attributes to match directives - combining the attributes,
inputs, outputs, and templateAttrs of the Template node regardless of its
origin. In the TDB's case this wasn't a problem, since the TDB collects a
global Set of directives used in the template, so it didn't matter whether
the directive was also recognized on the <ng-template>. t2_binder's API
distinguishes between directives on specific nodes, though, so it's more
sensitive to mismatching.
In particular, this showed up as an assertion failure in template type-
checking in certain cases, when a directive was accidentally matched on
a microsyntax template element and also had a binding which referenced a
variable declared in the microsyntax. This resulted in the type-checker
attempting to generate a reference to a variable that didn't exist in that
scope.
The fix is to distinguish between the two cases and select the appropriate
set of attributes to match on accordingly.
Testing strategy: tested in the t2_binder tests.
PR Close#29698
This commit adds support for template type-checking a pipe binding which
previously was not handled by the type-checking engine. In compatibility
mode, the arguments to transform() are not checked and the type returned
by a pipe is 'any'. In full type-checking mode, the transform() method's
type signature is used to check the pipe usage and infer the return type
of the pipe.
Testing strategy: TCB tests included.
PR Close#29698
The template type-checking engine previously would assemble a type-checking
program by inserting Type Check Blocks (TCBs) into existing user files. This
approach proved expensive, as TypeScript has to re-parse and re-type-check
those files when processing the type-checking program.
Instead, a far more performant approach is to augment the program with a
single type-checking file, into which all TCBs are generated. Additionally,
type constructors are also inlined into this file.
This is not always possible - both TCBs and type constructors can sometimes
require inlining into user code, particularly if bound generic type
parameters are present, so the approach taken is actually a hybrid. These
operations are inlined if necessary, but are otherwise generated in a single
file.
It is critically important that the original program also include an empty
version of the type-checking file, otherwise the shape of the two programs
will be different and TypeScript will throw away all the old program
information. This leads to a painfully slow type checking pass, on the same
order as the original program creation. A shim to generate this file in the
original program is therefore added.
Testing strategy: this commit is largely a refactor with no externally
observable behavioral differences, and thus no tests are needed.
PR Close#29698
This commit adds support in the template type-checking engine for handling
the logical not operation and the safe navigation operation.
Safe navigation in particular is tricky, as the View Engine implementation
has a rather inconvenient flaw. View Engine checks a safe navigation
operation `a?.b` as:
```typescript
(a != null ? a!.b : null as any)
```
The type of this expression is always 'any', as the false branch of the
ternary has type 'any'. Thus, using null-safe navigation throws away the
type of the result, and breaks type-checking for the rest of the expression.
A flag is introduced in the type-checking configuration to allow Ivy to
mimic this behavior when needed.
Testing strategy: TCB tests included.
PR Close#29698
View Engine's implementation of naive template type-checking is less
advanced than the current Ivy implementation. As a result, Ivy catches lots
of typing bugs which VE does not. As a result, it's necessary to tone down
the Ivy template type-checker in the default case.
This commit introduces a mechanism for doing that, by passing a config to
the template type-checking engine. Through this configuration, particular
checks can be loosened or disabled entirely.
Testing strategy: TCB tests included.
PR Close#29698
Previously the template type-checking code only considered the metadata of
directive classes actually referenced in the template. If those directives
had base classes, any inputs/outputs/etc of the base classes were not
tracked when generating the TCB. This resulted in bindings to those inputs
being incorrectly attributed to the host component or element.
This commit uses the new metadata package to follow directive inheritance
chains and use the full metadata for a directive for TCB generation.
Testing strategy: Template type-checking tests included.
PR Close#29698
Previously, metadata registration (the recording of collected metadata
during analysis of directives, pipes, and NgModules) was only used to
produce the `LocalModuleScope`, and thus was handled by the
`LocalModuleScopeRegistry`.
However, the template type-checker also needs information about registered
directives, outside of the NgModule scope determinations. Rather than
reuse the scope registry for an unintended purpose, this commit introduces
new abstractions for metadata registration and lookups in a separate
'metadata' package, which the scope registry implements.
This paves the way for a future commit to make use of this metadata for the
template type-checking system.
Testing strategy: this commit is a refactoring which introduces no new
functionality, so existing tests are sufficient.
PR Close#29698
Previously, bindings to [class] and [style] were treated like any other
property binding. That is, they would result in type-checking code that
attempted to write directly to .class or .style on the element node.
This is incorrect, however - the mapping from Angular's [class] and [style]
onto the DOM properties is non-trivial.
For now, this commit avoids the issue by only checking the expressions
themselves and not the assignment to the element properties.
Testing strategy: TCB tests included.
PR Close#29698
Previously the template type-checking engine processed templates in a linear
manner, and could not handle '#' references within a template. One reason
for this is that '#' references are non-linear - a reference can be used
before its declaration. Consider the template:
```html
{{ref.value}}
<input #ref>
```
Accommodating this required refactoring the type-checking code generator to
be able to produce Type Check Block (TCB) code non-linearly. Now, each
template is processed and a list of TCB operations (`TcbOp`s) are created.
Non-linearity is modeled via dependencies between operations, with the
appropriate protection in place for circular dependencies.
Testing strategy: TCB tests included.
PR Close#29698
This commit adds support for the generation of type-checking expressions for
forms which were previously unsupported:
* array literals
* map literals
* keyed property accesses
* non-null assertions
Testing strategy: TCB tests included.
Fixes#29327
FW-1218 #resolve
PR Close#29698
This commit adds a test suite for the Type Check Block generation which
doesn't require running the entire compiler (specifically, it doesn't even
require the creation of a ts.Program).
PR Close#29698
This commit adds registration of AOT compiled NgModules that have 'id'
properties set in their metadata. Such modules have a call to
registerNgModuleType() emitted as part of compilation.
The JIT behavior of this code is already in place.
This is required for module loading systems (such as g3) which rely on
getModuleFactory().
PR Close#29980
Previously, ngtsc would fail to resolve `forwardRef` calls if they
contained additional parenthesis or casts. This commit changes the
behavior to first unwrap the AST nodes to see past such insignificant
nodes, resolving the issue.
Fixes#29639
PR Close#29886
Previously, only static evaluation of `Array.slice` was implemented in
ngtsc's static evaluator. This commit adds support for `Array.concat`.
Closes#29835
PR Close#29887
The config path is an optional argument to `ts.parseJsonConfigFileContent`. When passed, it is added to the returned object as `options.configFilePath`, and `tsc` itself passes it in.
The new TS 3.4 [incremental](https://www.typescriptlang.org/docs/handbook/release-notes/typescript-3-4.html) build functionality relies on this property being present: 025d826339/src/compiler/emitter.ts (L56-L57)
When using The compiler-cli `readConfiguration` the config path option isn't passed, preventing consumers (like @ngtools/webpack) from obtaining a complete config object.
This PR fixes this omission and should allow JIT users of @ngtools/webpack to set the `incremental` option in their tsconfig and have it be used by the TS program.
I tested this in JIT and saw a small decrease in build times in a small project. In AOT the incremental option didn't seem to be used at all, due to how `ngc` uses the TS APIs.
Related to https://github.com/angular/angular-cli/issues/13941.
PR Close#29872
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
Prior to this change, element attributes annotated with i18n- prefix were removed from element attribute list and processed separately by i18n-specific logic. This behavior is causing issues with directive matching, since attributes are not present in the list of attrs for matching purposes. This commit updates i18n logic to retain attributes in the main attribute list, thus allowing directive matching logic to work correctly.
PR Close#29856
The `Δ` caused issue with other infrastructure, and we are temporarily
changing it to `ɵɵ`.
This commit also patches ts_api_guardian_test and AIO to understand `ɵɵ`.
PR Close#29850
So far using runtime i18n with ivy meant that you needed to use Closure and `goog.getMsg` (or a polyfill). This PR changes the compiler to output both closure & non-closure code, while the unused option will be tree-shaken by minifiers.
This means that if you use the Angular CLI with ivy and load a translations file, you can use i18n and the application will not throw at runtime.
For now it will not translate your application, but at least you can try ivy without having to remove all of your i18n code and configuration.
PR Close#28689
Currently in Ivy we pass both the raw and parsed selectors to the projectionDef instruction, because the parsed selectors are used to match most nodes, whereas the raw ones are used to match against nodes with the ngProjectAs attribute. The raw selectors add a fair bit of code that won't be used in most cases, because ngProjectAs is somewhat rare.
These changes rework the compiler not to output the raw selectors in the projectionDef, but to parse the selector in ngProjectAs and to store it on the TAttributes. The logic for matching has also been changed so that it matches the pre-parsed ngProjectAs selector against the list of projection selectors.
PR Close#29578
Previously we always walked the whole folder tree looking for
entry-points before we tested whether a target package had been
processed already. This could take >10secs!
This commit does a quick check of the target package before doing
the full walk which brings down the execution time for ngcc in this
case dramatically.
```
$ time ./node_modules/.bin/ivy-ngcc -t @angular/common/http/testing
Compiling @angular/core : fesm2015 as esm2015
Compiling @angular/core : fesm5 as esm5
Compiling @angular/core : esm2015 as esm2015
Compiling @angular/core : esm5 as esm5
Compiling @angular/common/http : fesm2015 as esm2015
Compiling @angular/common/http : fesm5 as esm5
Compiling @angular/common/http : esm2015 as esm2015
Compiling @angular/common/http : esm5 as esm5
Compiling @angular/common/http/testing : fesm2015 as esm2015
Compiling @angular/common/http/testing : fesm5 as esm5
Compiling @angular/common/http/testing : esm2015 as esm2015
Compiling @angular/common/http/testing : esm5 as esm5
real 0m19.766s
user 0m28.533s
sys 0m2.262s
```
```
$ time ./node_modules/.bin/ivy-ngcc -t @angular/common/http/testing
The target entry-point has already been processed
real 0m0.666s
user 0m0.605s
sys 0m0.113s
```
PR Close#29740
Previously, if a matching rootDir ended with a slash then the path
returned from `logicalPathOfFile()` would not start with a slash,
which is inconsistent.
PR Close#29627
The defineInjector function specifies its providers and imports array to
be optional, so if no providers/imports are present these keys may be
omitted. This commit updates the compiler to only generate the keys when
necessary.
PR Close#29598
Prior to this change, a module's imports and exports would be used verbatim
as an injectors' imports. This is detrimental for tree-shaking, as a
module's exports could reference declarations that would then prevent such
declarations from being eligible for tree-shaking.
Since an injector actually only needs NgModule references as its imports,
we may safely filter out any declarations from the list of module exports.
This makes them eligible for tree-shaking once again.
PR Close#29598
Prior to this change, all module metadata would be included in the
`defineNgModule` call that is set as the `ngModuleDef` field of module
types. Part of the metadata is scope information like declarations,
imports and exports that is used for computing the transitive module
scope in JIT environments, preventing those references from being
tree-shaken for production builds.
This change moves the metadata for scope computations to a pure function
call that patches the scope references onto the module type. Because the
function is marked pure, it may be tree-shaken out during production builds
such that references to declarations and exports are dropped, which in turn
allows for tree-shaken any declaration that is not otherwise referenced.
Fixes#28077, FW-1035
PR Close#29598
With the new API, where you can choose to only process the first
matching format, it is possible to process an entry-point multiple
times, if you pass in a different format each time.
Previously, ngcc would always try to process the typings files for
the entry-point along with processing the first format of the current
execution of ngcc. But this meant that it would be trying to process
the typings a second time.
Now we only process the typings if they have not already been
processed as part of processing another format in another
even if it was in a different execution of ngcc.
PR Close#29657
In ES2015, classes could have been emitted as a variable declaration
initialized with a class expression. In certain situations, an intermediary
variable suffixed with `_1` is present such that the variable
declaration's initializer becomes a binary expression with its rhs being
the class expression, and its lhs being the identifier of the intermediate
variable. This structure was not recognized, resulting in such classes not
being considered as a class in `Esm2015ReflectionHost`.
As a consequence, the analysis of functions/methods that return a
`ModuleWithProviders` object did not take the methods of such classes into
account.
Another edge-case with such intermediate variable was that static
properties would not be considered as class members. A testcase was added
to prevent regressions.
Fixes#29078
PR Close#29119
Currently there is no support in ngtsc for imports of the form:
```
import * as core from `@angular/core`
export function forRoot(): core.ModuleWithProviders;
```
This commit modifies the `ReflectionHost.getImportOfIdentifier(id)`
method, so that it supports this kind of return type.
PR Close#27675
This commit introduces a mechanism for incremental compilation to the ngtsc
compiler.
Previously, incremental information was used in the construction of the
ts.Program for subsequent compilations, but was not used in ngtsc itself.
This commit adds an IncrementalState class, which tracks state between ngtsc
compilations. Currently, this supports skipping the TypeScript emit step
when the compiler can prove the contents of emit have not changed.
This is implemented for @Injectables as well as for files which don't
contain any Angular decorated types. These are the only files which can be
proven to be safe today.
See ngtsc/incremental/README.md for more details.
PR Close#29380
This commit adds support for compiling the same program repeatedly in a way
that's similar to how incremental builds work in a tool such as the CLI.
* support is added to the compiler entrypoint for reuse of the Program
object between compilations. This is the basis of the compiler's
incremental compilation model.
* support is added to wrap the CompilerHost the compiler creates and cache
ts.SourceFiles in between compilations.
* support is added to track when files are emitted, for assertion purposes.
* an 'exclude' section is added to the base tsconfig to prevent .d.ts
outputs from the first compilation from becoming inputs to any subsequent
compilations.
PR Close#29380
This commit adds a `tracePerformance` option for tsconfig.json. When
specified, it causes a JSON file with timing information from the ngtsc
compiler to be emitted at the specified path.
This tracing system is used to instrument the analysis/emit phases of
compilation, and will be useful in debugging future integration work with
@angular/cli.
See ngtsc/perf/README.md for more details.
PR Close#29380
Currently, ngtsc decides to use remote scoping if the compilation of a
component may create a cyclic import. This happens if there are two
components in a scope (say, A and B) and A directly uses B. During
compilation of B ngtsc will then note that if B were to use A, a cycle would
be generated, and so it will opt to use remote scoping for B.
ngtsc already uses the R3TargetBinder to correctly track the imports that
are actually required, for future cycle tracking. This commit expands that
usage to not trigger remote scoping unless B actually does consume A in its
template.
PR Close#29404
Previously we were using absolute paths, but since at rendering time
we do not know exactly where the file will be written it is more correct
to change to using relative paths. This is actually better all round
since it allows the folders to be portable to different machines, etc.
PR Close#29556
We have already removed this concept from the public API. This just cleans it out altogether.
The `targetPath` was an alternative output path to the original `basePath`.
This is not really a very useful concept, since the actual target path
of each output file is more complex and not consistently relative to the `basePath`.
PR Close#29556
Currently when building an Angular project with `ngtsc`
and `flatModuleOutFile` enabled, the Ngtsc build will fail
if there are multiple source files as root file names.
Ngtsc and NGC currently determine the entry-point for multiple
root file names by looking for files ending with `/index.ts`.
This functionality is technically deprecated, but still supported
and currently breaks on Windows as the root file names are not
guaranteed to be normalized POSIX-like paths.
In order to make this logic more reliable in the future, this commit
also switches the shim generators and entry-point logic to the branded
path types. This ensures that we don't break this in the future.
PR Close#29453
Previously, several `ngtsc` and `ngcc` APIs dealing with class
declaration nodes used inconsistent types. For example, some methods of
the `DecoratorHandler` interface expected a `ts.Declaration` argument,
but actual `DecoratorHandler` implementations specified a stricter
`ts.ClassDeclaration` type.
As a result, the stricter methods would operate under the incorrect
assumption that their arguments were of type `ts.ClassDeclaration`,
while the actual arguments might be of different types (e.g. `ngcc`
would call them with `ts.FunctionDeclaration` or
`ts.VariableDeclaration` arguments, when compiling ES5 code).
Additionally, since we need those class declarations to be referenced in
other parts of the program, `ngtsc`/`ngcc` had to either repeatedly
check for `ts.isIdentifier(node.name)` or assume there was a `name`
identifier and use `node.name!`. While this assumption happens to be
true in the current implementation, working around type-checking is
error-prone (e.g. the assumption might stop being true in the future).
This commit fixes this by introducing a new type to be used for such
class declarations (`ts.Declaration & {name: ts.Identifier}`) and using
it consistently throughput the code.
PR Close#29209
Previously, only directives and services with generic type parameters
would emit `any` as generic type when emitting Ivy metadata into .d.ts
files. Pipes can also have generic type parameters but did not emit
`any` for all type parameters, resulting in the omission of those
parameters which causes compilation errors.
This commit adds support for pipes with generic type arguments and emits
`any` as generic type in the Ivy metadata.
Fixes#29400
PR Close#29403
This commit adds a `NewEntryPointFileWriter` that will be used in
webpack integration. Instead of overwriting files in-place, this `FileWriter`
will make a copy of the TS program files and write the transformed files
there. It also updates the package.json with new properties that can be
used to access the new entry-point format.
FW-1121
PR Close#29092
If `targetEntryPointPath` is provided to `mainNgcc` then we will now mark all
the `propertiesToConsider` for that entry-point if we determine that
it does not contain code that was compiled by Angular (for instance it has
no `...metadata.json` file).
The commit also renames `__modified_by_ngcc__` to `__processed_by_ivy_ngcc__`, since
there may be entry-points that are marked despite ngcc not actually compiling anything.
PR Close#29092
Now we check the build-marker version for all the formats
rather than just the one we are going to compile.
This way we don't get into the situation where one format was
built with one version of ngcc and another format was built with
another version.
PR Close#29092
Now the public API does not contain internal types, such as `AbsoluteFsPath` and
`EntryPointJsonProperty`. Instead we just accept strings and then guard them in
`mainNgcc` as appropriate.
A new public API function (`hasBeenProcessed`) has been exported to allow programmatic
checking of the build marker when the package.json contents are already known.
PR Close#29092
Previously we always considered all the properties in the package.json
if no `propertiesToConsidere` were provided.
But this results in computing a new set of properties for each entry-point
plus iterating through many of the package.json properties that are
not related to bundle-format paths.
PR Close#29092
Sometimes, in ESM5 code, aliases to exported variables are used internally
to refer to the exported value. This prevented some analysis from being
able to match up a reference to an export to the actual export itself.
For example in the following code:
```
var HttpClientXsrfModule = /** @class */ (function () {
function HttpClientXsrfModule() {
}
HttpClientXsrfModule_1 = HttpClientXsrfModule;
HttpClientXsrfModule.withOptions = function (options) {
if (options === void 0) { options = {}; }
return {
ngModule: HttpClientXsrfModule_1,
providers: [],
};
};
var HttpClientXsrfModule_1;
HttpClientXsrfModule = HttpClientXsrfModule_1 = tslib_1.__decorate([
NgModule({
providers: [],
})
], HttpClientXsrfModule);
return HttpClientXsrfModule;
}());
```
We were not able to tell that the `ngModule: HttpClientXsrfModule_1` property
assignment was actually meant to refer to the `function HttpClientXrsfModule()`
declaration. This caused the `ModuleWithProviders` processing to fail.
This commit ensures that we can compile typings files using the ESM5
format, so we can now update the examples boilerplate tool so that it
does not need to compile the ESM2015 format at all.
PR Close#29092
In ESM5 code, static methods appear as property assignments onto the constructor
function. For example:
```
var MyClass = (function() {
function MyClass () {}
MyClass.staticMethod = function() {};
return MyClass;
})();
```
This commit teaches ngcc how to process these forms when searching
for `ModuleWithProviders` functions that need to be updated in the typings
files.
PR Close#29092
By default ngcc will compile all the format properties specified. With this
change you can configure ngcc so that it will stop compiling an entry-point
after the first property that matches the `propertiesToConsider`.
PR Close#29092
By ensuring that EntryPointBundle contains everything that `Transformer.transform()`
needs to do its work, we can simplify its signature.
PR Close#29092
Now that we are using package.json properties to indicate which
entry-point format to compile, it turns out that we don't really
need to distinguish between flat and non-flat formats, unless we
are compiling `@angular/core`.
PR Close#29092
You can now specify a list of properties in the package.json that
should be considered (in order) to find the path to the format to compile.
The build marker system has been updated to store the markers in
the package.json rather than an additional external file.
Also instead of tracking the underlying bundle format that was compiled,
it now tracks the package.json property.
BREAKING CHANGE:
The `proertiesToConsider` option replaces the previous `formats` option,
which specified the final bundle format, rather than the property in the
package.json.
If you were using this option to compile only specific bundle formats,
you must now modify your usage to pass in the properties in the package.json
that map to the format that you wish to compile.
In the CLI, the `--formats` is no longer available. Instead use the
`--properties` option.
FW-1120
PR Close#29092
You can now, programmatically, specify an entry-point where
the ngcc compilation will occur.
Only this entry-point and its dependencies will be compiled.
FW-1119
PR Close#29092
The `mainNgcc()` function has been refactored to make it easier to call
ngcc from JavaScript, rather than via the command line.
For example, the `yargs` argument parsing and the exception
handling/logging have moved to the `main-ngcc.ts`
file so that it is only used for the command line version.
FW-1118
PR Close#29092
Previously we only compiled the typings files, in ngcc, if there was
an ES2015 formatted bundle avaiable. This turns out to be an artificial
constraint and we can also support typings compilation via ES5 formats
too.
This commit changes the ngcc compiler to attempt typings compilation
via ES5 if necessary. The order of the formats to consider is now:
FESM2015, FESM5, ESM2015, ESM5.
FW-1122
PR Close#29092
This patch is the first of a few patches which separates the
styling logic between template bindings (e.g. <div [style])
from host bindings (e.g. @HostBinding('style')). This patch
in particular introduces a series of host-specific styling
instructions and changes the existing set of template styling
instructions not to accept directives. The underyling code (which
communicates with the styling algorithm) still works as it did
before.
This PR also separates the styling instruction code into a separate
file and moves over all other instructions into an dedicated
instructions directory.
PR Close#29292
This fix is for a bug in the ngtsc PartialEvaluator, which statically
evaluates expressions.
Sometimes, evaluating a reference requires resolving a function which is
declared in another module, and thus no function body is available. To
support this case, the PartialEvaluator has the concept of a foreign
function resolver.
This allows the interpretation of expressions like:
const router = RouterModule.forRoot([]);
even though the definition of the 'forRoot' function has no body. In
ngtsc today, this will be resolved to a Reference to RouterModule itself,
via the ModuleWithProviders foreign function resolver.
However, the PartialEvaluator also associates any Identifiers in the path
of this resolution with the Reference. This is done so that if the user
writes
const x = imported.y;
'x' can be generated as a local identifier instead of adding an import for
'y'.
This was at the heart of a bug. In the above case with 'router', the
PartialEvaluator added the identifier 'router' to the Reference generated
(through FFR) to RouterModule.
This is not correct. References that result from FFR expressions may not
have the same value at runtime as they do at compile time (indeed, this is
not the case for ModuleWithProviders). The Reference generated via FFR is
"synthetic" in the sense that it's constructed based on a useful
interpretation of the code, not an accurate representation of the runtime
value. Therefore, it may not be legal to refer to the Reference via the
'router' identifier.
This commit adds the ability to mark such a Reference as 'synthetic', which
allows the PartialEvaluator to not add the 'router' identifier down the
line. Tests are included for both the PartialEvaluator itself as well as the
resultant buggy behavior in ngtsc overall.
PR Close#29387
The `resolve` phase (run after all handlers have analyzed) was
introduced in 7d954dffd, but `ngcc` was not updated to run the handlers'
`resolve()` methods. As a result, certain operations (such as listing
directives used in component templates) would not be performed by
`ngcc`.
This commit fixes it by running the `resolve()` methods once analysis
has been completed.
PR Close#28963
Currently if an Angular library has multiple unnamed module re-exports, NGC will
generate incorrect metdata if the project is using the flat-module bundle option.
e.g.
_public-api.ts_
```ts
export * from '@mypkg/secondary1';
export * from '@mypkg/secondary2';
```
There are clearly two unnamed re-exports in the `public-api.ts` file. NGC right now
accidentally overwrites all previous re-exports with the last one. Resulting in the
generated metadata only containing a reference to `@mypkg/secondary2`.
This is problematic as it is common for primary library entry-points to have
multiple re-exports (e.g. Material re-exporting all public symbols; or flex-layout
exporting all public symbols from their secondary entry-points).
Currently Angular Material works around this issue by manually creating
a metadata file that declares the re-exports from all unnamed re-exports.
(see: https://github.com/angular/material2/blob/master/tools/package-tools/build-release.ts#L78-L85)
This workaround works fine currently, but is no longer easily integrated when
building the package output with Bazel. In order to be able to build such
libraries with Bazel (Material/flex-layout), we need to make sure that NGC
generates the proper flat-module metadata bundle.
PR Close#29360
Previously, ngtsc would resolve forward references while evaluating the
bootstrap, declaration, imports, and exports fields of NgModule types.
However, when generating the resulting ngModuleDef, the forward nature of
these references was not taken into consideration, and so the generated JS
code would incorrectly reference types not yet declared.
This commit fixes this issue by introducing function closures in the
NgModuleDef type, similarly to how NgComponentDef uses them for forward
declarations of its directives and pipes arrays. ngtsc will then generate
closures when required, and the runtime will unwrap them if present.
PR Close#29198
This fixes an issue with commit b6f6b117. In this commit, default imports
processed in a type-to-value conversion were recorded as non-local imports
with a '*' name, and the ImportManager generated a new default import for
them. When transpiled to ES2015 modules, this resulted in the following
correct code:
import i3 from './module';
// somewhere in the file, a value reference of i3:
{type: i3}
However, when the AST with this synthetic import and reference was
transpiled to non-ES2015 modules (for example, to commonjs) an issue
appeared:
var module_1 = require('./module');
{type: i3}
TypeScript renames the imported identifier from i3 to module_1, but doesn't
substitute later references to i3. This is because the import and reference
are both synthetic, and never went through the TypeScript AST step of
"binding" which associates the reference to its import. This association is
important during emit when the identifiers might change.
Synthetic (transformer-added) imports will never be bound properly. The only
possible solution is to reuse the user's original import and the identifier
from it, which will be properly downleveled. The issue with this approach
(which prompted the fix in b6f6b117) is that if the import is only used in a
type position, TypeScript will mark it for deletion in the generated JS,
even though additional non-type usages are added in the transformer. This
again would leave a dangling import.
To work around this, it's necessary for the compiler to keep track of
identifiers that it emits which came from default imports, and tell TS not
to remove those imports during transpilation. A `DefaultImportTracker` class
is implemented to perform this tracking. It implements a
`DefaultImportRecorder` interface, which is used to record two significant
pieces of information:
* when a WrappedNodeExpr is generated which refers to a default imported
value, the ts.Identifier is associated to the ts.ImportDeclaration via
the recorder.
* when that WrappedNodeExpr is later emitted as part of the statement /
expression translators, the fact that the ts.Identifier was used is
also recorded.
Combined, this tracking gives the `DefaultImportTracker` enough information
to implement another TS transformer, which can recognize default imports
which were used in the output of the Ivy transform and can prevent them
from being elided. This is done by creating a new ts.ImportDeclaration for
the imports with the same ts.ImportClause. A test verifies that this works.
PR Close#29266
Prior to this change default selector for Components was not applied in case selector is missing or defined as an empty string. This update aligns this behavior between Ivy and VE: now default selector is used for Components when it's needed. Directives with empty selector are not allowed and trigger a compile-time error in both Ivy and VE.
PR Close#29239
`api-extractor` binary is required for external consumers of `ng_module` that want to use the `bundle_dts` flag.
This also sets a different api-exttractor binary to use for ng_module, based if it's internal or external.
PR Close#29202
Prior to this change the code didn't take into account the fact that decorators can be aliases while importing into a script. As a result, these decorators were not recognized by Angular and various failures happened because of that. Now we take aliases into account and resolve decorator name properly.
PR Close#29195
`getCurrentDirectory` directory doesn't return a posix separated normalized path. While `rootDir` and `rootDirs` should return posix separated paths, it's best to not assume as other paths within the compiler options can be returned not posix separated such as `basePath`
See: https://github.com/Microsoft/TypeScript/blob/master/src/compiler/sys.ts#L635
This partially fixes#29140, however there needs to be a change in the CLI as well to handle this, as at the moment we are leaking devkit paths which is not correct.
Fixes#29140
PR Close#29151
Sometimes declarations are not exported publicly but are exported under
a private name. In this case, rather than adding a completely new
export to the entry point, we should create an export that aliases the
private name back to the original public name.
This is important when the typings files have been rolled-up using a tool
such as the [API Extractor](https://api-extractor.com/). In this case
the internal type of an aliased private export will be removed completely
from the typings file, so there is no "original" type to re-export.
For example:
If there are the following TS files:
**entry-point.ts**
```ts
export {Internal as External} from './internal';
```
**internal.ts**
```ts
export class Internal {
foo(): void;
}
```
Then the API Extractor might roll up the .d.ts files into:
```ts
export declare class External {
foo(): void;
}
```
In this case ngcc should add an export so the file looks like:
```ts
export declare class External {
foo(): void;
}
export {External as Internal};
```
PR Close#28735
ngsummary files were generated with an export for each class declaration.
However, some Angular code declares classes (class Foo) and exports them
(export {Foo}) separately, which was causing incomplete summary files.
This commit expands the set of symbol names for which summary exports will
be generated, fixing this issue.
PR Close#29193
Previously, when the NgModule scope resolver discovered semantic errors
within a users NgModules, it would throw assertion errors. TODOs in the
codebase indicated these should become ts.Diagnostics eventually.
Besides producing better-looking errors, there is another reason to make
this change asap: these assertions were shadowing actual errors, via an
interesting mechanism:
1) a component would produce a ts.Diagnostic during its analyze() step
2) as a result, it wouldn't register component metadata with the scope
resolver
3) the NgModule for the component references it in exports, which was
detected as an invalid export (no metadata registering it as a
component).
4) the resulting assertion error would crash the compiler, hiding the
real cause of the problem (an invalid component).
This commit should mitigate this problem by converting scoping errors to
proper ts.Diagnostics. Additionally, we should consider registering some
marker indicating a class is a directive/component/pipe without actually
requiring full metadata to be produced for it, which would allow suppression
of errors like "invalid export" for such invalid types.
PR Close#29191
At the moment, certain tests relies on resolving the module with an index.d.ts, this root cause might be some implementations are missing from the mocks.
Similar to: 58b4045359
PR Close#28884
This commit refactors and expands ngtsc's support for generating imports of
values from imports of types (this is used for example when importing a
class referenced in a type annotation in a constructor).
Previously, this logic handled "import {Foo} from" and "import * as foo
from" style imports, but failed on imports of default values ("import
Foo from"). This commit moves the type-to-value logic to a separate file and
expands it to cover the default import case. Doing this also required
augmenting the ImportManager to track default as well as non-default import
generation. The APIs were made a little cleaner at the same time.
PR Close#29146
In the TypeScript compiler API, emit() can be performed either on a single
ts.SourceFile or on the entire ts.Program simultaneously.
ngtsc previously used whole-program emit, which was convenient to use while
spinning up the project but has a significant drawback: it causes a type
checking operation to occur for the whole program, including .d.ts files.
In large Bazel environments (such as Google's codebase), an ngtsc invocation
can have a few .ts files and thousands of .d.ts inputs. This unwanted type
checking is therefore a significant drain on performance.
This commit switches ngtsc to emit each .ts file individually, avoiding the
unwanted type checking.
PR Close#29147
When processing a JavaScript program, TS may come across a symbol that has
been imported from a TypeScript typings file.
In this case the compiler may pass the ReflectionHost a `prototype` symbol
as an export of the class.
This pseudo-member symbol has no declarations, which previously caused the
code in `Esm5ReflectionHost.reflectMembers()` to crash.
Now we just quietly ignore such a symbol and leave `Esm2015ReflectionHost`
to deal with it.
(As it happens `Esm2015ReflectionHost` also quietly ignores this symbol).
PR Close#29158
Prior to this commit, i18n instructions (i18n, i18nStart) were generated before listener instructions. As a result, event listeners were attached to the wrong element (text node, not the parent element). This change updates the order of instructions and puts i18n ones after listeners, to make sure listeners are attached to the right elements.
PR Close#29173
For the template type checking to work correctly, it needs to know
what attributes are bound to expressions or directives, which may
require expressions in the template to be evaluated in a different
scope.
In inline templates, there are attributes that are now marked as
"Template" attributes. We need to ensure that the template
type checking code looks at these "bound" attributes as well as the
"input" attributes.
PR Close#29041
The content projection mechanism is static, in that it only looks at the static
template nodes before directives are matched and change detection is run.
When you have a selector-based content projection the selection is based
on nodes that are available in the template.
For example:
```
<ng-content selector="[some-attr]"></ng-content>
```
would match
```
<div some-attr="..."></div>
```
If you have an inline-template in your projected nodes. For example:
```
<div *ngIf="..." some-attr="..."></div>
```
This gets pre-parsed and converted to a canonical form.
For example:
```
<ng-template [ngIf]="...">
<div some-attr=".."></div>
</ng-template>
```
Note that only structural attributes (e.g. `*ngIf`) stay with the `<ng-template>`
node. The other attributes move to the contained element inside the template.
When this happens in ivy, the ng-template content is removed
from the component template function and is compiled into its own
template function. But this means that the information about the
attributes that were on the content are lost and the projection
selection mechanism is unable to match the original
`<div *ngIf="..." some-attr>`.
This commit adds support for this in ivy. Attributes are separated into three
groups (Bindings, Templates and "other"). For inline-templates the Bindings
and "other" types are hoisted back from the contained node to the `template()`
instruction, so that they can be used in content projection matching.
PR Close#29041
- remove individuals from @angular/* package.json, we don't keep them up-to-date
- switch keys in contributors.json to GitHub handles, seems like a better identifier and lets us grab avatar images from GitHub account
- move emeritus ppl to a new Alumni group (won't yet appear on the site)
- add "lead/mentor" keys so we know who is coordinating work
- add a script that generates an "org chart" graphic
PR Close#28930
Prior to this change, the RegExp that was used to check for dashes in field names used "g" (global) flag that retains lastIndex, which might result in skipping some fields that should be wrapped in quotes (since lastIndex advanced beyond the next "-" location). This commit removes this flag and updates the test to make sure there are no regressions.
PR Close#29126
ngtsc occasionally converts a type reference (such as the type of a
parameter in a constructor) to a value reference (argument to a
directiveInject call). TypeScript has a bad habit of sometimes removing
the import statement associated with this type reference, because it's a
type only import when it initially looks at the file.
A solution to this is to always add an import to refer to a type position
value that's imported, and not rely on the existing import.
PR Close#29111
When ngtsc generates a .ngfactory shim, it does so based on the contents of
an original file in the program. Occasionally these original files have
comments at the top which are load-bearing (e.g. they contain jsdoc
annotations which are significant to downstream bundling tools). The
generated factory shims should preserve this comment.
This commit adds a step to the ngfactory generator to preserve the top-level
comment from the original source file.
FW-1006 #resolve
FW-1095 #resolve
PR Close#29065
Prior to this change, keys in "inputs" and "outputs" objects generated by compiler were not checked against unsafe characters. As a result, in some cases the generated code was throwing JS error. Now we check whether a given key contains any unsafe chars and wrap it in quotes if needed.
PR Close#28919
The ngtsc partial evaluator previously would not handle an enum reference
inside a template string expression correctly. Enums are resolved to an
`EnumValue` type, which has a `resolved` property with the actual value.
When effectively toString-ing a `ResolvedValue` as part of visiting a
template expression, the partial evaluator needs to translate `EnumValue`s
to their fully resolved value, which this commit does.
PR Close#29062
Currently, ngtsc has a bug where if you alias the name of a decorator when
importing it, it won't be detected properly. This is because the compiler
uses the aliased name and not the original, declared name of the decorator
for detection.
This commit fixes the compiler to compare against the declared name of
decorators when available, and adds a test to prevent regression.
PR Close#29061
ngtsc has cyclic import detection, to determine when adding an import to a
directive or pipe would create a cycle. However, this detection must also
account for already inserted imports, as it's possible for both directions
of a circular import to be inserted by Ivy (as opposed to at least one of
those edges existing in the user's program).
This commit fixes the circular import detection for components to take into
consideration already added edges. This is difficult for one critical
reason: only edges to files which will *actually* be imported should be
considered. However, that depends on which directives & pipes are used in
a given template, which is currently only known by running the
TemplateDefinitionBuilder during the 'compile' phase. This is too late; the
decision whether to use remote scoping (which consults the import graph) is
made during the 'resolve' phase, before any compilation has taken place.
Thus, the only way to correctly consider synthetic edges is for the compiler
to know exactly which directives & pipes are used in a template during
'resolve'. There are two ways to achieve this:
1) refactor `TemplateDefinitionBuilder` to do its work in two phases, with
directive matching occurring as a separate step which can be performed
earlier.
2) use the `R3TargetBinder` in the 'resolve' phase to independently bind the
template and get information about used directives.
Option 1 is ideal, but option 2 is currently used for practical reasons. The
cost of binding the template can be shared with template-typechecking.
PR Close#29040
In the @Component decorator, the 'host' field is an object which represents
host bindings. The type of this field is complex, but is generally of the
form {[key: string]: string}. Several different kinds of bindings can be
specified, depending on the structure of the key.
For example:
```
@Component({
host: {'[prop]': 'someExpr'}
})
```
will bind an expression 'someExpr' to the property 'prop'. This is known to
be a property binding because of the square brackets in the binding key.
If the binding key is a plain string (no brackets or parentheses), then it
is known as an attribute binding. In this case, the right-hand side is not
interpreted as an expression, but is instead a constant string.
There is no actual requirement that at build time, these constant strings
are known to the compiler, but this was previously enforced as a side effect
of requiring the binding expressions for property and event bindings to be
statically known (as they need to be parsed). This commit breaks that
relationship and allows the attribute bindings to be dynamic. In the case
that they are dynamic, the references to the dynamic values are reflected
into the Ivy instructions for attribute bindings.
PR Close#29033
DynamicValues are generated whenever a partially evaluated expression is
unable to be resolved statically. They contain a reference to the ts.Node
which wasn't resolvable.
They can also be nested. For example, the expression 'a + b' is resolvable
only if 'a' and 'b' are themselves resolvable. If either 'a' or 'b' resolve
to a DynamicValue, the whole expression must also resolve to a DynamicValue.
Previously, if 'a' resolved to a DynamicValue, the entire expression might
have been resolved to the same DynamicValue. This correctly indicated that
the expression wasn't resolvable, but didn't return a reference to the
shallow node that couldn't be resolved (the expression 'a + b'), only a
reference to the deep node that couldn't be resolved ('a').
In certain situations, it's very useful to know the shallow unresolvable
node (for example, to use it verbatim in the output). To support this,
the partial evaluator is updated to always wrap DynamicValue to point to
each unresolvable expression as it's processed, ensuring the receiver can
determine exactly which expression node failed to resolve.
PR Close#29033
This change helps highlight certain misoptimizations with Closure
compiler. It is also stylistically preferable to consistently use index
access on index sig types.
Roughly, when one sees '.foo' they know it is always checked for typos
in the prop name by the type system (unless 'any'), while "['foo']" is
always not.
Once all angular repos are conforming this will become a tsetse.info
check, enforced by bazel.
PR Close#28937
Prior to this change, TypeScript stripped out some imports in case we reference a type that can be represented as a value (for ex. classes). This fix ensures that we use correct symbol identifier, which makes TypeScript retain the necessary import statements.
PR Close#28941
Angular supports using <style> and <link> tags inline in component
templates, but previously such tags were not implemented within the ngtsc
compiler. This commit introduces that support.
FW-1069 #resolve
PR Close#28997
Prior to this change i18n block bindings were converted to Expressions right away (once we first access them), when in non-i18n cases we processed them differently: the actual conversion happens at instructions generation. Because of this discrepancy, the output for bindings in i18n blocks was generated incorrectly (with invalid indicies in pipeBindN fns and invalid references to non-existent local variables). Now the bindings processing is unified and i18nExp instructions should contain right bind expressions.
PR Close#28969
This commit introduces support for the windows paths in the new concrete types mechanism that was introduced in this PR https://github.com/angular/angular/pull/28523
Normalized posix paths that start with either a `/` or `C:/` are considered to be an absolute path.
Note: `C:/` is used as a reference, as other drive letters are also supported.
Fixes#28754
PR Close#28752
Prior to this change, the logic that outputs i18n consts (like `const MSG_XXX = goog.getMsg(...)`) didn't have a check whether a given const that represent a certain i18n message was already included into the generated output. This commit adds the logic to mark corresponding i18n contexts after translation was generated, to avoid duplicate consts in the output.
PR Close#28967
The partial evaluator in ngtsc can handle a shorthand property declaration
in the middle evaluation, but fails if evaluation starts at the shorthand
property itself. This is because evaluation starts at the ts.Identifier
of the property (the ts.Expression representing it), not the ts.Declaration
for the property.
The fix for this is to detect in TypeScriptReflectionHost when a ts.Symbol
refers to a shorthand property, and to use the ts.TypeChecker method
getShorthandAssignmentValueSymbol() to resolve the value of the assignment
instead.
FW-1089 #resolve
PR Close#28936
In certain configurations (such as the g3 repository) which have lots of
small compilation units as well as strict dependency checking on generated
code, ngtsc's default strategy of directly importing directives/pipes into
components will not work. To handle these cases, an additional mode is
introduced, and is enabled when using the FileToModuleHost provided by such
compilation environments.
In this mode, when ngtsc encounters an NgModule which re-exports another
from a different file, it will re-export all the directives it contains at
the ES2015 level. The exports will have a predictable name based on the
FileToModuleHost. For example, if the host says that a directive Foo is
from the 'root/external/foo' module, ngtsc will add:
```
export {Foo as ɵng$root$external$foo$$Foo} from 'root/external/foo';
```
Consumers of the re-exported directive will then import it via this path
instead of directly from root/external/foo, preserving strict dependency
semantics.
PR Close#28852
Ayaz Hafiz
Pete Bacon Darwin
crisbeto
JoostK
Greg Magolan
Alex Rickabaugh
Olivier Combe
Andrew Kushnir
Matt Lewis
Matt Lewis
Alex Eagle
Paul Gschwendtner
Ben Lesh
George Kalpakas
Matias Niemelä
Kara Erickson
janith
Alan
Filipe Silva
MaksPob
Marc Laval
Igor Minar
Rado Kirov
Wassim Chegham