Partial resubmit of #26243
Fixes incorrect url tree generation for empty path components with children.
Adds a test to demonstrate the failure of createUrlTree for those routes.
Fixes#13011Fixes#35687
PR Close#37446
Due to an outage with the proxy we rely on for publishing, we need
to temporarily directly publish to NPM using our own angular
credentials again.
PR Close#37378
Tslib version is bound to the TypeScript version used to compile the library. Thus, we shouldn't list `tslib` as a `peerDependencies`. This is because, a user can install libraries which have been compiled with older versions of TypeScript and thus require multiple `tslib` versions to be installed.
Reference: TOOL-1374 and TOOL-1375
Closes: #37188
PR Close#37198
PR #13380 added support for `null` and `undefined` but the type on the parameter was not updated.
This would result in a compilation error if `fullTemplateTypeCheck` is enabled.
Fixes#36544
PR Close#37018
The current code will not work as the `e` will be an event,
If we try to access e.id and e.url it will throw an exception, the correct way is to use map or filter down to specific events
PR Close#37027
We can remove all of the entry point resolution configuration from the package.json
in our source code as ng_package rule adds the properties automatically and correctly
configures them.
This change simplifies our code base but doesn't have any impact on the package.json
in the distributed npm_packages.
PR Close#36944
This change aligns behavior for resolvers which return EMPTY. Currently EMPTY resolvers have inconsistent behavior:
- One resolver that returns EMPTY => won't navigate and just ends on ResolveStart router event.
- Two resolvers where both return EMPTY => throws "Error: Uncaught (in promise): EmptyError: no elements in sequence"
- Two resolvers where one returns a value and the other one returns EMPTY => Navigates successfully.
With this change any EMPTY resolver will cancel navigation.
BREAKING CHANGE: Any resolver which return EMPTY will cancel navigation.
If you want to allow the navigation to continue, you will need to update the resolvers to emit
some value, (i.e. defaultIfEmpty(...), of(...), etc).
PR Close#24195
PR Close#24621
A CanLoad guard returning UrlTree cancels current navigation and redirects.
This matches the behavior available to `CanActivate` guards added in #26521.
Note that this does not affect preloading. A `CanLoad` guard blocks any
preloading. That is, any route with a `CanLoad` guard is not preloaded
and the guards are not executed as part of preloading.
fixes#28306
PR Close#36610
This was originally fixed in #35976, but one of the window.scrollY
assertions was missed. Also updated tests to use toBeGreater/LessThan
to improve failure messages.
PR Close#36742
This PR adds test case to cover a failure that was detected after
merging #36302. That commit will be reverted and will need a new PR that
does not cause this test to fail.
PR Close#36699
fixes#34614
There's an edge case where if I use two (or more) sibling <router-outlet>s in two (or more) child routes where their parent route doesn't have a component then preactivation will trigger all canDeactivate checks with the same component because it will use wrong OutletContext.
PR Close#36302
1. update jasmine to 3.5
2. update @types/jasmine to 3.5
3. update @types/jasminewd2 to 2.0.8
Also fix several cases, the new jasmine 3 will help to create test cases correctly,
such as in the `jasmine 2.x` version, the following case will pass
```
expect(1 == 2);
```
But in jsamine 3, the case will need to be
```
expect(1 == 2).toBeTrue();
```
PR Close#34625
The matcher is allowed to return null per
https://angular.io/api/router/UrlMatcher#usage-notes
And run `yarn gulp format` to pick up recent clang format changes.
Closes#29824
BREAKING CHANGE: UrlMatcher's type now reflects that it could always return
null.
If you implemented your own Router or Recognizer class, please update it to
handle matcher returning null.
PR Close#36402
ts-api-guardian uses `require.resolve` to resolve the actual and golden files under bazel. In Windows for these files to be resolved correct the full path including the workspace name as per the MANIFEST entries is required.
This used to be the case until the recent changes done to use npm_integration tests
83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L19)83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L28)
```
bazel test //packages/... --test_tag_filters=api_guard
//packages/animations:animations_api (cached) PASSED in 18.4s
//packages/common:common_api (cached) PASSED in 25.5s
//packages/compiler-cli:compiler_options_api (cached) PASSED in 12.4s
//packages/compiler-cli:error_code_api (cached) PASSED in 11.6s
//packages/core:core_api (cached) PASSED in 20.6s
//packages/core:ng_global_utils_api (cached) PASSED in 13.5s
//packages/elements:elements_api (cached) PASSED in 11.9s
//packages/forms:forms_api (cached) PASSED in 13.9s
//packages/http:http_api (cached) PASSED in 14.8s
//packages/localize:localize_api (cached) PASSED in 6.3s
//packages/platform-browser:platform-browser_api (cached) PASSED in 18.1s
//packages/platform-browser-dynamic:platform-browser-dynamic_api (cached) PASSED in 14.0s
//packages/platform-server:platform-server_api (cached) PASSED in 13.9s
//packages/platform-webworker:platform-webworker_api (cached) PASSED in 13.7s
//packages/platform-webworker-dynamic:platform-webworker-dynamic_api (cached) PASSED in 11.7s
//packages/router:router_api (cached) PASSED in 19.9s
//packages/service-worker:service-worker_api (cached) PASSED in 18.1s
//packages/upgrade:upgrade_api (cached) PASSED in 13.5s
```
Reference: DEV-71
PR Close#36034
Moves the public api .d.ts files from tools/public_api_guard to
goldens/public-api.
Additionally, provides a README in the goldens directory and a script
assist in testing the current state of the repo against the goldens as
well as a command for accepting all changes to the goldens in a single
command.
PR Close#35768
As a part of the process of setting up Router providers, we use `ApplicationRef` as a dependency while providing `Router` token. The thing is that `ApplicationRef` is actually unused (all referenced were removed in 5a849829c4 (diff-c0baae5e1df628e1a217e8dc38557fcb)), but it's still listed as dependency. This is causing problems in case `Router` is used as a dependency for factory functions provided as `APP_INITIALIZERS` multi-token (causing cyclic dependency). This commit removes unused `ApplicationRef` dependency in `Router`, so it can be used without causing cyclic dependency issue.
PR Close#35642
* it's tricky to get out of the runfiles tree with `bazel test` as `BUILD_WORKSPACE_DIRECTORY` is not set but I employed a trick to read the `DO_NOT_BUILD_HERE` file that is one level up from `execroot` and that contains the workspace directory. This is experimental and if `bazel test //:test.debug` fails than `bazel run` is still guaranteed to work as `BUILD_WORKSPACE_DIRECTORY` will be set in that context
* test //integration:bazel_test and //integration:bazel-schematics_test exclusively
* run "exclusive" and "manual" bazel-in-bazel integration tests in their own CI job as they take 8m+ to execute
```
//integration:bazel-schematics_test PASSED in 317.2s
//integration:bazel_test PASSED in 167.8s
```
* Skip all integration tests that are now handled by angular_integration_test except the tests that are tracked for payload size; these are:
- cli-hello-world*
- hello_world__closure
* add & pin @babel deps as newer versions of babel break //packages/localize/src/tools/test:test
@babel/core dep had to be pinned to 7.6.4 or else //packages/localize/src/tools/test:test failed. Also //packages/localize uses @babel/generator, @babel/template, @babel/traverse & @babel/types so these deps were added to package.json as they were not being hoisted anymore from @babel/core transitive.
NB: integration/hello_world__systemjs_umd test must run with systemjs 0.20.0
NB: systemjs must be at 0.18.10 for legacy saucelabs job to pass
NB: With Bazel 2.0, the glob for the files to test `"integration/bazel/**"` is empty if integation/bazel is in .bazelignore. This glob worked under these conditions with 1.1.0. I did not bother testing with 1.2.x as not having integration/bazel in .bazelignore is correct.
PR Close#33927
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
Currently we only run Saucelabs on PRs using the legacy View Engine
build. Switching that build to Ivy is not trivial and there are various
options:
1. Updating the R3 switches to use POST_R3 by default. At first glance,
this doesn't look easy because the current ngtsc switch logic seems to
be unidirectional (only PRE_R3 to POST_R3).
2. Updating the legacy setup to run with Ivy. This sounds like the easiest
solution at first.. but it turns out to be way more complicated. Packages
would need to be built with ngtsc using legacy tools (i.e. first building
the compiler-cli; and then building packages) and View Engine only tests
would need to be determined and filtered out. Basically it will result in
re-auditing all test targets. This is contradictory to the fact that we have
this information in Bazel already.
3. Creating a new job that runs tests on Saucelabs with Bazel. We specify
fine-grained test targets that should run. This would be a good start
(e.g. acceptance tests) and also would mean that we do not continue maintaining
the legacy setup..
This commit implements the third option as it allows us to move forward
with the general Bazel migration. We don't want to spend too much time
on our legacy setup since it will be removed anyway in the future.
PR Close#34277
Under bazel and Ivy we don't need the shim files to be emmited by default.
We still need to the shims for blaze however because google3 code imports them.
This improves build latency by 1-2 seconds per ng_module target.
PR Close#33765
The url_tree equalQueryParams and containsQueryParam methods did not handle query params that has arrays, which resulted in the routerLinkActive to not behave as expected, change was made to ensure query params with arrays are handled correctly
fixes#22223
PR Close#22666
The url_tree equalQueryParams and containsQueryParam methods did not handle query params that has arrays, which resulted in the routerLinkActive to not behave as expected, change was made to ensure query params with arrays are handled correctly
fixes#22223
PR Close#22666
This is a breaking change in nodejs rules 0.40.0 as part of the API review & cleanup for the 1.0 release. Their APIs are identical as ts_web_test was just karma_web_test without the config_file attribute.
PR Close#33802
Resubmit #31168 now that google3 tests can pass. This requires http://cl/272696717 to be patched.
Original description from jasonaden:
Without this change when using UrlTree redirects in urlUpdateStrategy="eager", the URL would get
updated to the target location, then redirected. This resulted in having an additional entry in the
history and thus the back button would be broken (going back would land on the URL causing a new
redirect).
Additionally, there was a bug where the redirect, even without urlUpdateStrategy="eager", could
create a history with too many entries. This was due to kicking off a new navigation within the
navigation cancelling logic. With this PR the new navigation is pushed to the next tick with a
setTimeout, allowing the page being redirected from to be cancelled before starting a new
navigation.
Related to #27148
fix(router): adjust UrlTree redirect to replace URL if in eager update
Fix lint errors
PR Close#32988
BREAKING CHANGE:
We no longer directly have a direct depedency on `tslib`. Instead it is now listed a `peerDependency`.
Users not using the CLI will need to manually install `tslib` via;
```
yarn add tslib
```
or
```
npm install tslib --save
```
PR Close#32167
There is some confusion around which `NavigationExtras` values are used
by createUrlTree. This specifies that only values that change the URL
are used. This came up during the discussion in #27148.
PR Close#33029
`InitialNavigation` is used in `ExtraOptions`, which is already part of
the public API. Thus, `InitialNavigation` should be too. Not publicly
exporting it from `router/index.ts` seems an omission, since the type is
already annotated with the `@publicApi` JSDoc tag.
By publicly exporting `InitialNavigation`, it will also correctly appear
in the API docs on angular.io.
PR Close#32707
Fixes all TypeScript failures caused by enabling the `--strict`
flag for test source files. We also want to enable the strict
options for tests as the strictness enforcement improves the
overall codehealth, unveiled common issues and additionally it
allows us to enable `strict` in the `tsconfig.json` that is picked
up by IDE's.
PR Close#30993
Without this change when using UrlTree redirects in `urlUpdateStrategy="eager"`, the URL would get updated to the target location, then redirected. This resulted in having an additional entry in the `history` and thus the `back` button would be broken (going back would land on the URL causing a new redirect).
Additionally, there was a bug where the redirect, even without `urlUpdateStrategy="eager"`, could create a history with too many entries. This was due to kicking off a new navigation within the navigation cancelling logic. With this PR the new navigation is pushed to the next tick with a `setTimeout`, allowing the page being redirected from to be cancelled before starting a new navigation.
Related to #27148
PR Close#31168
This commit makes the static flag on @ViewChild and @ContentChild required.
BREAKING CHANGE:
In Angular version 8, it's required that all @ViewChild and @ContentChild
queries have a 'static' flag specifying whether the query is 'static' or
'dynamic'. The compiler previously sorted queries automatically, but in
8.0 developers are required to explicitly specify which behavior is wanted.
This is a temporary requirement as part of a migration; see
https://angular.io/guide/static-query-migration for more details.
@ViewChildren and @ContentChildren queries are always dynamic, and so are
unaffected.
PR Close#30639
PR #30393 corrected behavior where Object.keys sometimes returns an `undefined` value. However, the types didn't reflect this in the code. That fix actually missed one value that could return `undefined`. This PR corrects this by casting the types to what they can be in IE 11. This ensures the code behaves as it should when this edge case comes up.
PR Close#30464
In some cases where multiple navigations happen to the same URL, the router will not process a given URL. In those cases, we fall into logic that resets state for the next navigation. One piece of this resetting is to set the `browserUrlTree` to the most recent `urlAfterRedirects`i.
However, there was bug in this logic because in some cases the `urlAfterRedirects` is a stale value. This happens any time a URL won't be processed, and the previous URL will also not be processed. This creates unpredictable behavior, not the least of which ends up being a broken `back` button.
This PR kicks off new navigations with the current value the router assumes is in the browser. All the logic around how to handle future navigations is based on this value compared to the current transition, so it's important to kick off all new navigations with the current value so in the edge case described above we don't end up with an old value being set into `browserUrlTree`.
Fixes#30340
Related to #30160
PR Close#30344
This PR fixes an issue where IE 11 can return `undefined` in with an `Object.keys` call. Solution is to add a runtime check on the value. Based on the types being passed, this shouldn't be necessary, but is needed only for IE 11. Unit test doesn't work for this PR because it can't be replicated easily.
PR Close#30393
There was a problem with a combination of the `eager` URL update, browser `back` button, and hybrid applications. Details provided in internal ticket http://b/123667227.
This fix handles the problem by setting `router.browserUrlTree` when all conditions have failed, meaning the browser doesn't do anything with the navigation other than update internal data structures. Without this change, the problem was an old value was stored in `router.broserUrlTree` causing some new navigations to be compared to an old value and breaking future navigations.
PR Close#30160
The proposed ES dynamic import() is now supported by the Angular CLI and the
larger toolchain. This renders the `loadChildren: string` API largely
redundant, as import() is far more natural, is less error-prone, and is
standards compliant. This commit deprecates the `string` form of
`loadChildren` in favor of dynamic import().
DEPRECATION:
When defining lazy-loaded route, Angular previously offered two options for
configuring the module to be loaded, both via the `loadChildren` parameter
of the route. Most Angular developers are familiar withthe `string` form of
this API. For example, the following route definition configures Angular to
load a `LazyModule` NgModule from `lazy-route/lazy.module.ts`:
```
[{
path: 'lazy',
loadChildren: 'lazy-route/lazy.module#LazyModule',
}]
```
This "magic string" configuration was previously necessary as there was
no dynamic module loading standard on the web. This has changed with the
pending standardization of dynamic `import()` expressions, which are now
supported in the Angular CLI and in web tooling in general. `import()`
offers a more natural and robust solution to dynamic module loading. The
above example can be rewritten to use dynamic `import()`:
```
[{
path: 'lazy',
loadChildren: () => import('./lazy-route/lazy.module').then(mod => mod.LazyModule),
}]
```
This form of lazy loading offers significant advantages in terms of:
* type checking via TypeScript
* simplicity of generated code
* future potential to run natively in supporting browsers
(see: [caniuse: dynamic import()](https://caniuse.com/#feat=es6-module-dynamic-import))
As a result, Angular is deprecating the `loadChildren: string` syntax in
favor of ES dynamic `import()`. An automatic migration will run during
`ng upgrade` to convert your existing Angular code to the new syntax.
PR Close#30073
Prior to this change, if a navigation was ongoing and a new one came in, the router could get into a state where `router.currentNavigation` was `null` even though a navigation was executing. This change moves where we set the `currentNavigation` value so it's inside a `switchMap`. This solves the problem because the `finally` on the `switchMap` had been setting `currentNavigation` to `null` but the new `currentNavigation` value would have already been set. Essentially this was a timing problem and is resolved with this change.
Fixes#29389#29590
PR Close#29636
clarify scrollPositionRestoration enabled to fully describe the functionality it provides. refactor app module example to compile and remove dependency on unnecessary framework. Remove component example due to bug on reload.
PR Close#29260
The router loadChildren property already supports a promise that returns a NgModuleFactory, but the typings cause the compilation to fail.
PR Close#29392
Andrew Scott
Markus Ende
Joey Perrott
Alan Agius
m-ahmadi
Santosh Yadav
Paul Gschwendtner
Igor Minar
Martin Sikora
Matias Niemelä
Greg Magolan
JiaLiPassion
Mikel Ward
Joey Perrott
Felix Becker
Andrew Kushnir
atscott
Miško Hevery
Christopher Dahm
Zaid Al-Omari
Alex Rickabaugh
Alison Gale
Sahan Serasinghe
Judy Bogart
Ferdinand Malcher
Niklas Merz
Arne Hoek
George Kalpakas
Trevor Karjanis
Carlos Ortiz García
Kara Erickson
Esteban Gehring
Alexander Ivanov
Jason Aden
Alex Eagle
Frederik Prijck
Ben Lesh
Brandon
Filipe Silva
ijz953