This commit provides a replacement for `$location`. The new service is written in Angular, and can be consumed into existing applications by using the downgraded version
of the provider.
Prior to this addition, applications upgrading from AngularJS to Angular could get into a situation where AngularJS wanted to control the URL, and would often parse or se
rialize the URL in a different way than Angular. Additionally, AngularJS was alerted to URL changes only through the `$digest` cycle. This provided a buggy feedback loop
from Angular to AngularJS.
With this new `LocationUpgradeProvider`, the `$location` methods and events are provided in Angular, and use Angular APIs to make updates to the URL. Additionally, change
s to the URL made by other parts of the Angular framework (such as the Router) will be listened for and will cause events to fire in AngularJS, but will no longer attempt
to update the URL (since it was already updated by the Angular framework).
This centralizes URL reads and writes to Angular and should help provide an easier path to upgrading AngularJS applications to Angular.
PR Close#30055
Without this change, the framework doesn't surface URL parts such as hostname, protocol, and port. This makes it difficult to rebuild a complete URL. This change provides new APIs to read these values.
PR Close#30055
Previously there wasn't a way to retrieve `history.state` from the `Location` service. The only time the framework exposed this value was in navigation events. This meant if you weren't using the Angular router, there wasn't a way to get access to this `history.state` value other than going directly to the DOM.
This PR adds an API to retrieve the value of `history.state`. This will be useful and needed to provide a backwards-compatible `Location` service that can emulate AngularJS's `$location` service since we will need to be able to read the state data in order to produce AngularJS location transition events.
This feature will additionally be useful to any application that wants to access state data through Angular rather than going directly to the DOM APIs.
PR Close#30055
Fixes view and content queries not being inherited in Ivy, if the base class hasn't been annotated with an Angular decorator (e.g. `Component` or `Directive`).
Also reworks the way the `ngBaseDef` is created so that it is added at the same point as the queries, rather than inside of the `Input` and `Output` decorators.
This PR partially resolves FW-1275. Support for host bindings will be added in a follow-up, because this PR is somewhat large as it is.
PR Close#30015
built-in, relative, absolute, nested node_modules - Error: Cannot find module '../lib/cli'
built-in, relative, absolute, nested node_modules - Error: Cannot find module '../lib/cli'
This is because the transpiled lib files need to be added to the data.
PR Close#30063
At the moment `ts_api_guardian_test` rule depends on the entire node_modules tree, this is causing an input file tree of over 71473 in the material repo which is failing RBE
With this change we add only the required dependencies to as data attribute instead of the `@npm//:node_modules`
With this change we should also reduce the `Too many open files in system` error that sometimes crops up
PR Close#30051
With this change downstream users will no longer need to build ts-api-guardian from source as now the bazel rule is available in the npm package.
This can be used by installing ts-api-guardian as a devDependency and changing the load syntax from:
```
load("@angular//tools/ts-api-guardian:index.bzl", "ts_api_guardian_test")
```
to:
```
load("@npm_ts_api_guardian//:index.bzl", "ts_api_guardian_test")
```
**Note**: downstream users should also clean their `WORKSPACE` and remove the dependencies of angular workspace.
PR Close#29977
With dts bundles, `core.d.ts` will include an `EventListener` class as it's used in 303eae918d/packages/core/src/debug/debug_node.ts (L32)
This will conflict with the DOM EventListener, as anything in `core.d.ts` which is using the DOM EventListener will fallback in using the one defined in the same module and hence build will fail because their implementation is different.
With this change, we rename the local `EventListener` to `DebugEventListener`, the later one is non exported.
Fixes#29806
PR Close#29809
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
The `Δ` caused issue with other infrastructure, and we are temporarily
changing it to `ɵɵ`.
This commit also patches ts_api_guardian_test and AIO to understand `ɵɵ`.
PR Close#29850
So far using runtime i18n with ivy meant that you needed to use Closure and `goog.getMsg` (or a polyfill). This PR changes the compiler to output both closure & non-closure code, while the unused option will be tree-shaken by minifiers.
This means that if you use the Angular CLI with ivy and load a translations file, you can use i18n and the application will not throw at runtime.
For now it will not translate your application, but at least you can try ivy without having to remove all of your i18n code and configuration.
PR Close#28689
- Removes `@publicApi` annotation from ivy instructions
- Adds new `@codeGenApi` annotation to ivy instructions
- Updates ts_api_guardian to support the new annotation properly
PR Close#29820
Currently in Ivy we pass both the raw and parsed selectors to the projectionDef instruction, because the parsed selectors are used to match most nodes, whereas the raw ones are used to match against nodes with the ngProjectAs attribute. The raw selectors add a fair bit of code that won't be used in most cases, because ngProjectAs is somewhat rare.
These changes rework the compiler not to output the raw selectors in the projectionDef, but to parse the selector in ngProjectAs and to store it on the TAttributes. The logic for matching has also been changed so that it matches the pre-parsed ngProjectAs selector against the list of projection selectors.
PR Close#29578
The new styling algorithm in angular is designed to evaluate host
bindings stylinh priority in order of directive evaluation order. This,
however, does not work with respect to parent/sub-class directives
because sub-class host bindings are run after the parent host bindings
but still have priority. This patch ensures that the host styling bindings
for parent and sub-class components/directives are executed with respect
to the styling algorithm prioritization.
Jira Issue: FW-1132
PR Close#29602
Adds an overload to TestBed.get making parameters strongly typed and
deprecated previous signature that accepted types `any`. The function
still returns `any` to prevent build breakages, but eventually stronger
type checks will be added so a future Angular version will break builds
due to additional type checks.
See previous breaking change - #13785
Issue #26491
PR Close#29290
This new interface will match classes whether they are abstract or
concrete. Casting as `AbstractType<MyConcrete>` will return a type that
isn't newable. This type will be used to match abstract classes in the
`get()` functions of `Injector` and `TestBed`.
Type isn't used yet so this isn't a breaking change.
Issue #26491
PR Close#29295
Currently our plan is to skip the publish, docgen, and update steps for this package.
During RC, we'll determine if the breaking change is too difficult for users, in which case we might restore the package for another major.
PR Close#29550
Previously we had to share code between upgrade/dynamic and upgrade/static
by symlinking the `src` folder, which allowed both packages to access
the upgrade/common files.
These symlinks are always problematic on Windows, where we had to run
a script to re-link them, and restore them.
This change uses Bazel packages to share the `upgrade/common` code,
which avoids the need for symlinking the `src` folder.
Also, the Windows specific scripts that fixup the symlinks have also
been removed as there is no more need for them.
PR Close#29466
Currently with the release of "8.0.0-beta.10", the Bazel npm packag accidentally
was stamped with an incorrect version placeholder: `8.0.0-beta.10+1.sha-a28b3e3`.
This can happen because the placeholder is based on latest tag that matches the
Semver format. e.g. if `HEAD` equals to the commit that has the latest tag, the
version name will be correct and refer to the tag name (e.g. `8.0.0-beta.10`). Though
if the latest commit is not tagged with the most recent tag, the version
name will also include the SHA of the commit (e.g. `8.0.0-beta.10+1.sha-a28b3e3`).
We can ensure that we don't accidentally release versions from a more recent commit
that shouldn't be part of the release by adding a pre-release check that ensures that
the `BUILD_SCM_VERSION` Bazel status variable matches the expected version format.
PR Close#29551
The router loadChildren property already supports a promise that returns a NgModuleFactory, but the typings cause the compilation to fail.
PR Close#29392
After rebasing Material on master, we found new tests that were
added and are still failing. This commit adds them to the blocklist
so we can fix them.
PR Close#29409
Just updating comments in query-related things to make it easier for the next person that has to grok this for the first time.
Also adds a demo from @mhevery to one of the query specs
Related #29031
PR Close#29342
Just updating comments in query-related things to make it easier for the next person that has to grok this for the first time.
Also adds a demo from @mhevery to one of the query specs
Related #29031
PR Close#29342
Angular Ivy interprets inline static style/class attribute values as instructions that
are processed whilst an element gets created. Because these inline style values are
referenced by style/class bindings, their inline style values are applied at a later
stage. Despite them being eventually applied, their values should be applied earlier
before any directives are instantiated so that directive code can rely on any inline
style/class changes.
This patch ensures that all static style/class attribute values are applied (rendered)
on the element before directives are instantiated.
Jira Issue: FW-1133
PR Close#29269
Jason Aden
Kristiyan Kostadinov
Alan Agius
Ben Lesh
Alex Eagle
Greg Magolan
Filipe Silva
Alex Rickabaugh
Olivier Combe
Matias Niemelä
Carlos Ortiz García
Pete Bacon Darwin
Paul Gschwendtner
Marc Laval
Kara Erickson