packer-cn/website/pages/docs/builders/parallels/pvm.mdx

---
modeline: |
  vim: set ft=pandoc:
description: |
  This Parallels builder is able to create Parallels Desktop for Mac virtual
  machines and export them in the PVM format, starting from an existing PVM
  (exported virtual machine image).
layout: docs
page_title: Parallels PVM - Builders
sidebar_title: PVM
---

# Parallels Builder (from a PVM)

Type: `parallels-pvm`

This Parallels builder is able to create [Parallels Desktop for
Mac](https://www.parallels.com/products/desktop/) virtual machines and export
them in the PVM format, starting from an existing PVM (exported virtual machine
image).

The builder builds a virtual machine by importing an existing PVM file. It then
boots this image, runs provisioners on this new VM, and exports that VM to
create the image. The imported machine is deleted prior to finishing the build.

## Basic Example

Here is a basic example. This example is functional if you have an PVM matching
the settings here.

```json
{
  "type": "parallels-pvm",
  "parallels_tools_flavor": "lin",
  "source_path": "source.pvm",
  "ssh_username": "packer",
  "ssh_password": "packer",
  "ssh_timeout": "30s",
  "shutdown_command": "echo 'packer' | sudo -S shutdown -P now"
}
```

It is important to add a `shutdown_command`. By default Packer halts the virtual
machine and the file system may not be sync'd. Thus, changes made in a
provisioner might not be saved.

## Configuration Reference

There are many configuration options available for the Parallels builder. They
are organized below into two categories: required and optional. Within each
category, the available options are alphabetized and described.

In addition to the options listed here, a
[communicator](/docs/templates/communicator) can be configured for this
builder.

### Required:

- `parallels_tools_flavor` (string) - The flavor of the Parallels Tools ISO to
  install into the VM. Valid values are "win", "lin", "mac", "os2"
  and "other". This can be omitted only if `parallels_tools_mode`
  is "disable".

- `source_path` (string) - The path to a PVM directory that acts as the source
  of this build.

### Optional:

- `boot_command` (array of strings) - This is an array of commands to type
  when the virtual machine is first booted. The goal of these commands should
  be to type just enough to initialize the operating system installer. Special
  keys can be typed as well, and are covered in the section below on the
  boot command. If this is not specified, it is assumed the installer will
  start itself.

- `boot_wait` (string) - The time to wait after booting the initial virtual
  machine before typing the `boot_command`. The value of this should be
  a duration. Examples are "5s" and "1m30s" which will cause Packer to wait
  five seconds and one minute 30 seconds, respectively. If this isn't
  specified, the default is 10 seconds.

- `floppy_files` (array of strings) - A list of files to place onto a floppy
  disk that is attached when the VM is booted. This is most useful for
  unattended Windows installs, which look for an `Autounattend.xml` file on
  removable media. By default, no floppy will be attached. All files listed in
  this setting get placed into the root directory of the floppy and the floppy
  is attached as the first floppy device. Currently, no support exists for
  creating sub-directories on the floppy. Wildcard characters (\*, ?,
  and \[\]) are allowed. Directory names are also allowed, which will add all
  the files found in the directory to the floppy.

- `floppy_dirs` (array of strings) - A list of directories to place onto
  the floppy disk recursively. This is similar to the `floppy_files` option
  except that the directory structure is preserved. This is useful for when
  your floppy disk includes drivers or if you just want to organize it's
  contents as a hierarchy. Wildcard characters (\*, ?, and \[\]) are allowed.

- `floppy_label` (string) - The label to use for the floppy disk that
  is attached when the VM is booted. This is most useful for cloud-init,
  Kickstart or other early initialization tools, which can benefit from labelled floppy disks.
  By default, the floppy label will be 'packer'.

- `output_directory` (string) - This is the path to the directory where the
  resulting virtual machine will be created. This may be relative or absolute.
  If relative, the path is relative to the working directory when `packer`
  is executed. This directory must not exist or be empty prior to running
  the builder. By default this is "output-BUILDNAME" where "BUILDNAME" is the
  name of the build.

- `parallels_tools_guest_path` (string) - The path in the VM to upload
  Parallels Tools. This only takes effect if `parallels_tools_mode`
  is "upload". This is a [configuration
  template](/docs/templates/engine) that has a single
  valid variable: `Flavor`, which will be the value of
  `parallels_tools_flavor`. By default this is `prl-tools-{{.Flavor}}.iso`
  which should upload into the login directory of the user.

- `parallels_tools_mode` (string) - The method by which Parallels Tools are
  made available to the guest for installation. Valid options are "upload",
  "attach", or "disable". If the mode is "attach" the Parallels Tools ISO will
  be attached as a CD device to the virtual machine. If the mode is "upload"
  the Parallels Tools ISO will be uploaded to the path specified by
  `parallels_tools_guest_path`. The default value is "upload".

- `prlctl` (array of array of strings) - Custom `prlctl` commands to execute
  in order to further customize the virtual machine being created. The value
  of this is an array of commands to execute. The commands are executed in the
  order defined in the template. For each command, the command is defined
  itself as an array of strings, where each string represents a single
  argument on the command-line to `prlctl` (but excluding `prlctl` itself).
  Each arg is treated as a [configuration
  template](/docs/templates/engine), where the `Name`
  variable is replaced with the VM name. More details on how to use `prlctl`
  are below.

- `prlctl_post` (array of array of strings) - Identical to `prlctl`, except
  that it is run after the virtual machine is shutdown, and before the virtual
  machine is exported.

- `prlctl_version_file` (string) - The path within the virtual machine to
  upload a file that contains the `prlctl` version that was used to create
  the machine. This information can be useful for provisioning. By default
  this is ".prlctl_version", which will generally upload it into the
  home directory.

- `reassign_mac` (boolean) - If this is "false" the MAC address of the first
  NIC will reused when imported else a new MAC address will be generated
  by Parallels. Defaults to "false".

- `shutdown_command` (string) - The command to use to gracefully shut down the
  machine once all the provisioning is done. By default this is an empty
  string, which tells Packer to just forcefully shut down the machine.

- `shutdown_timeout` (string) - The amount of time to wait after executing the
  `shutdown_command` for the virtual machine to actually shut down. If it
  doesn't shut down in this time, it is an error. By default, the timeout is
  "5m", or five minutes.

- `skip_compaction` (boolean) - Virtual disk image is compacted at the end of
  the build process using `prl_disk_tool` utility. In certain rare cases, this
  might corrupt the resulting disk image. If you find this to be the case,
  you can disable compaction using this configuration value.

- `vm_name` (string) - This is the name of the virtual machine when it is
  imported as well as the name of the PVM directory when the virtual machine
  is exported. By default this is "packer-BUILDNAME", where "BUILDNAME" is the
  name of the build.

## Parallels Tools

After the virtual machine is up and the operating system is installed, Packer
uploads the Parallels Tools into the virtual machine. The path where they are
uploaded is controllable by `parallels_tools_path`, and defaults to
"prl-tools.iso". Without an absolute path, it is uploaded to the home directory
of the SSH user. Parallels Tools ISO's can be found in: "/Applications/Parallels
Desktop.app/Contents/Resources/Tools/"

## Boot Command

The `boot_command` specifies the keys to type when the virtual machine is first
booted. This command is typed after `boot_wait`.

As documented above, the `boot_command` is an array of strings. The strings are
all typed in sequence. It is an array only to improve readability within the
template.

The boot command is "typed" character for character (using the Parallels
Virtualization SDK, see [Parallels Builder](/docs/builders/parallels))
simulating a human actually typing the keyboard.

@include 'builders/boot-command.mdx'

## prlctl Commands

In order to perform extra customization of the virtual machine, a template can
define extra calls to `prlctl` to perform.
[prlctl](http://download.parallels.com/desktop/v9/ga/docs/en_US/Parallels%20Command%20Line%20Reference%20Guide.pdf)
is the command-line interface to Parallels Desktop. It can be used to configure
the virtual machine, such as set RAM, CPUs, etc.

Extra `prlctl` commands are defined in the template in the `prlctl` section. An
example is shown below that sets the memory and number of CPUs within the
virtual machine:

```json
{
  "prlctl": [
    ["set", "{{.Name}}", "--memsize", "1024"],
    ["set", "{{.Name}}", "--cpus", "2"]
  ]
}
```

The value of `prlctl` is an array of commands to execute. These commands are
executed in the order defined. So in the above example, the memory will be set
followed by the CPUs.

Each command itself is an array of strings, where each string is an argument to
`prlctl`. Each argument is treated as a [configuration
template](/docs/templates/engine). The only available
variable is `Name` which is replaced with the unique name of the VM, which is
required for many `prlctl` calls.