Commit Graph

679 Commits

Author SHA1 Message Date
Matthew Hooker 9c027aa70b Merge pull request #4601 from mitchellh/ebssurrogate-copy-ami
build/amazon-ebssurrogate: Add region copy, attributes, tags steps
2017-02-27 10:47:34 -08:00
James Nugent e856339309 build/amazon-ebssurrogate: Add region copy, attributes, tags steps
As pointed out in the initial code review of #4351, some of the steps
from the standard EBS builder were (intetionally) omitted. It turns out
that these actually are useful, and the original rationale for the
omission was wrong. Consequently, this commit adds in the following
steps:

- `StepPrevalidate`
- `StepTagEBSVolumes`
- `StepDeregisterAMI`
- `StepCreateEncryptedAMICopy`
- `StepAMIRegionCopy`
- `StepModifyAMIAttribute`
- `StepCreateTags`

We also fix the interpolation filter and documentation to reflect these
additions, though the majority were already documented and just not
functional.
2017-02-27 09:05:39 -06:00
James Nugent 1eec5bf058 builder/amazon-ebssurrogate: Exclude duplicate root volume
This commit removes the root volume from the list of launch block device
mappings passed to the image, since it is already passed in the form of
a snapshot (which is then configured to be the root device). Without
this commit, AMIs created using this builder have two root volumes
attached on launch.
2017-02-27 06:57:35 -06:00
Matthew Hooker fd1b00a0d1
use aws helper method 2017-02-26 19:33:34 -08:00
Matthew Hooker 61976dfd86 Merge pull request #4578 from life360/enable_ena
Always set both SRIOV and ENA when Enhanced Networking is enabled
2017-02-26 19:31:22 -08:00
Matthew Hooker 6a7c37beb6
builder/amazon-chroot: support encrypted boot volume 2017-02-26 17:48:13 -08:00
Matthew Hooker 2cb9b32acf
don't attempt to delete non-existant key when using agent auth 2017-02-26 17:38:22 -08:00
Matthew Hooker f95514c120
fix ssh agent authentication
treat key name to empty string if it's not been set
by prior step.
2017-02-26 17:17:49 -08:00
Aaron Stone 1cc3cdf7b5 Always set both SRIOV and ENA when Enhanced Networking is enabled
Set SriovNetSupport to "simple". As of February 2017, this applies to C3, C4,
D2, I2, R3, and M4 (excluding m4.16xlarge).

Set EnaSupport to true. As of February 2017, this applies to C5, I3, P2, R4,
X1, and m4.16xlarge.
2017-02-25 07:16:35 -08:00
Richard Owen 33a4c2e13b Change EC2 WindowsPasswordTimeout to 20 minutes
10 minutes is often exceeded when using a custom source AMI
which has been sysprepped.
2017-02-24 11:08:17 +00:00
James Nugent 635aeb765b amazon/ebssurrogate: Add New Builder
This commit adds a new type of builder which builds an AMI based on a
snapshot of an EBS volume which is provisioned on a "surrogate"
instance. This can be used to build operating system images from
scratch, but unlike the `chroot` builder does not require running from
an AWS EC2 instance.
2017-02-21 18:38:19 -06:00
Rickard von Essen c9259d116f builder/amazon-ebsvolume: Fix interpolation of block_device 2017-01-26 21:27:36 +01:00
Rickard von Essen de7388fa0a
builder/amazon-ebsvolume: Fixed interpolation of tags 2017-01-25 19:40:43 +01:00
Rickard von Essen 6e891cf682
Fixed botched merge and review comments 2017-01-22 21:57:23 +01:00
Rickard von Essen ba9cae5078 builder/amazon: Add SourceAMI and BuildRegion template
Added {{ .SourceAMI }} and {{ .BuildRegion }} template values availible
in `ami_description`, `run_tags`, `run_volume_tags`, `tags`, and
`snapshot_tags`.
2017-01-21 20:39:58 +01:00
Matthew Hooker fc30f6cc0a
log tag creation.
closes #4427
2017-01-19 12:00:41 -08:00
Matthew Hooker 56b5e97bf4
verify given security group 2017-01-18 15:25:31 -08:00
Matthew Hooker b265d2614f
builder/amazon: fix when using security_group_id
If `security_group_id` was specified with a group that didn't exist, packer
would go into an infinite loop waiting for it. We shouldn't make assumptions
about the status of explicitely set security groups, so let's just error out
right away if we can't find it.
2017-01-18 15:11:52 -08:00
Matthew Hooker f5bf588393
tag all volumes 2017-01-18 11:34:46 -08:00
Matthew Hooker 800351b7ca
fix panic and don't print each tag we add. 2017-01-18 11:34:36 -08:00
Roman Zhuzha d9186dc8cf add proper error handling for tagging source instance 2017-01-18 14:02:10 +01:00
Roman Zhuzha ae016a1f25 simplify code flow: skip the step if no run_volume_tags provided 2017-01-18 13:03:05 +01:00
Roman Zhuzha a65af51a4b apply source instance default "Name" tag only if it's not provided in run_tags 2017-01-18 12:55:18 +01:00
Roman Zhuzha 36d8a1df1d use common.ConvertToEC2Tags to apply tags to source EBS volumes, change Say message 2017-01-18 12:52:59 +01:00
Roman Zhuzha aa70c82ec8 use ConvertToEC2Tags to apply tags to source instance, add Say message 2017-01-18 12:50:20 +01:00
Matthew Hooker c1f5545986
compress pr #4395 2017-01-13 11:42:20 -08:00
Richard Moore 9435fa62e3 Output error causing ebs volume deletion failure
When an ebs volume fails to delete, Packer reports that there
was an error deleting the volume and the volume id. But it doesn't
give you the details of what that error is. This commit adds the
error reported back to the standard output.
2017-01-13 15:33:47 +00:00
Rickard von Essen 26fe9cf339
builder/amazon: Fix crash in amazon-instance
Closes #4360
2017-01-06 15:17:02 +01:00
Matthew Hooker 377f451a9e
it's InvalidGroup 2017-01-05 16:56:49 -08:00
Matthew Hooker e54605c120
Properly wait for security group to exist.
Adds check for `InvalidGroupID.NotFound` in addition to
`InvalidSecurityGroupID.NotFound`.

Uses aws's `waiter` for clarity.
2017-01-05 15:20:28 -08:00
Matthew Hooker aef6e0e93f Merge pull request #4304 from dave2/gh-4277
Querying EC2 security groups should report unexpected errors
2017-01-04 10:53:28 -08:00
Travis Harrington e31d75eca8 Quick fix for issue #4340 2016-12-29 09:16:52 -07:00
Rickard von Essen 4b1e014be8
builder/amazon: Crashes when multiple EBS vols are used
If you use a new EBS vol (which hasn't any snapshot) Packer crashes when
creating the AMI.

Closes #4303
2016-12-21 15:37:08 +01:00
Zanetti, David ae5730c5a5 Querying EC2 security groups should report unexpected errors
As noted in #4277, we don't report any errors from the loop waiting for
a security group to exist. Instead, we should accept 'errors' which result
from the group not yet existing, and report errors which are actual issues
the user needs to resolve (eg, IAM permissions are incorrect).

Closes #4277
2016-12-21 11:45:12 +13:00
Matthew Hooker e4f6eaae9b Merge pull request #4231 from artburkart/force-delete-snapshot-patch
Fixes acceptance test for PR #4223
2016-12-17 11:43:26 -08:00
Rickard von Essen d3c2239b9e
builder/amazon: Change shutdown_behaviour to shutdown_behavior 2016-12-14 21:59:16 +01:00
Rickard von Essen c24b4423b2 builder/amazon: Added new region London - eu-west-2 2016-12-14 10:55:19 +01:00
Alexander Krasnukhin ac98aad1df Fix log statement 2016-12-13 12:53:03 +01:00
Matthew Hooker f1fb942219
add ca-central-1 to list of known aws regions.
resolves #4273
2016-12-09 11:21:44 -08:00
Rickard von Essen 5c4d331a34 Added missing LaunchPermission 2016-12-06 09:59:09 +01:00
Rickard von Essen 4ce3b8712a
Replace unencrypted EBS snapshots with encrypted
To ensure that groups and users attributes are added to the encrypted
snapshots.
2016-12-06 03:31:09 +01:00
Rickard von Essen c3a352955e amazon: Added snapshot_users and snapshot_groups 2016-12-04 16:03:01 +01:00
Ari Aviran 46f217f255 amazon - Snapshot permissions correctly applied
Fixes #3344
2016-12-04 16:03:01 +01:00
Rickard von Essen d7a7d8c852
It's not possible to share encrypted AMI's 2016-12-04 15:52:23 +01:00
poida 8b13b75097 Updated documentation and error messages
The docs for kms_key_id needed to be next to encrypt_boot.

Shortened some of the kms_key_id error messages.
2016-12-03 07:49:54 +11:00
poida 7ea17e1630 Allow custom encrypted AMIs to be shared
When using a custom KMS key to encrypt the boot volume of an AMI, packer should allow it to be shared with other users.
2016-12-03 07:49:54 +11:00
poida 3eed6fd508 Added KMS CMK support to EBS builder
Added the 'kms_key_id' parameter. This supports supplying a customer master key (CMK) when encrypting the EBS volume.

The parameter is optional and only takes effect when 'encrypted' is true. When 'encrypted' is true but 'kms_key_id' is missing the 'aws/ebs' key will be used.
2016-12-03 07:49:34 +11:00
Rickard von Essen 8d2ceea5f1 builder/amazon: crash on tagging snapshot when snapshot_tags is unset
Closes #4238
2016-12-01 20:43:15 +01:00
Rickard von Essen bcc7f455b3 amazon: Fix source_ami_filter ignores owners 2016-12-01 14:29:31 +01:00
Arthur Burkart 576f6f1b39 Fixes acceptance test
The original acceptance test required a manual check. This one does
not.
2016-11-30 22:58:19 -05:00
Matthew Hooker 832de2104b
Revert "Merge pull request #4230 from mitchellh/revert-4223-closes_3320"
This reverts commit bda89b0c42, reversing
changes made to f9f9d82419.
2016-11-30 13:28:34 -08:00
Matthew Hooker f5c3c25d2b Revert "Adds `force_delete_snapshot` flag" 2016-11-30 13:10:22 -08:00
Matthew Hooker f9f9d82419 Merge pull request #4223 from artburkart/closes_3320
Adds `force_delete_snapshot` flag
2016-11-30 12:53:34 -08:00
Arthur Burkart 5b59f56cdb Adds `force_delete_snapshot` flag
This PR adds the ability for Packer to clean up snapshots in addition to
deregistering AMIs at build time.

To test this, I used the following `test.json` file:

```json
{
  "builders": [
    {
      "type": "amazon-ebs",
      "region": "us-east-1",
      "source_ami": "ami-fce3c696",
      "ami_name": "packer-test",
      "instance_type": "m3.medium",
      "ssh_username": "ubuntu",
      "vpc_id": "some-vpc-id",
      "subnet_id": "some-subnet-routed-through-igw",
      "security_group_id": "some-security-group-with-port-22-access",
      "force_delete_snapshot": true
    }
  ],
  "provisioners": [
    {
      "type": "shell-local",
      "command": "echo 'hello'"
    }
  ]
}

```

I appreciate any constructive feedbakc that can be given. Cheers!
2016-11-29 23:39:36 -05:00
Rickard von Essen 99ee610afa
builder/amazon: Fix SSH Agent
Closes #4220
2016-11-29 22:33:53 +01:00
Matthew Hooker aedf4ca465 Merge pull request #4141 from mitchellh/ebsvoluemartifact
add ebsvolume artifact
2016-11-28 15:50:03 -08:00
Matthew Hooker 50267572a4
add ebsvolume artifact 2016-11-28 15:26:09 -08:00
Rickard von Essen a09f20f996 Merge pull request #4015 from artburkart:closes_3908
Closes #3908: Adds snapshot tag overrides
2016-11-26 17:54:00 +01:00
Arthur Burkart 0c7e73b1cf
Implements Snapshot tagging
While implementing my acceptance test, I stumbled upon a comment stating
that snapshot deletion should also be implemented, so I snuck that in. I
can't help but wonder if there is some generic logic that is implemented
a few times throughout the packer code base that could maybe better serve
us if it were abstracted to the common package.
2016-11-26 17:48:26 +01:00
Rickard von Essen 17eda06d61
Fixed formatting 2016-11-24 21:12:20 +01:00
ephemeralsnow e53f4be005 Fix 'The AssociatePublicIpAddress parameter is only supported for VPC launches.' 2016-11-24 17:01:32 +01:00
Rickard von Essen 96e9a8e6e9 Removed default value for ssh_username 2016-11-17 22:30:34 +01:00
Arthur Burkart 2e65867cba Closes #3908: Adds snapshot tag overrides
This commit adds the ability to configure unique tags on snapshots
that are separate from the tags defined on the AMI. Anything applied
to the AMI will also be applied to the snapshots, but `snapshot_tags`
will override and append tags to the tags already applied to the snapshots
2016-11-15 23:16:27 -05:00
Matthew Hooker 9a91ae4e8f
fix new session error when creating cred chain.
the old and deprecated method won't error and so is safe to use
even if we're not in amazon.
2016-11-14 11:39:22 -08:00
Matthew Hooker d81c06765d
fix go vet issue.
closes #4130
2016-11-07 10:17:53 -08:00
Matthew Hooker f3f5f89fe6 Merge pull request #4096 from mitchellh/filterday
builder/amazon-ebs: show ami id found from filter
2016-11-02 12:25:46 -07:00
Matthew Hooker 60c459d6c8 Merge pull request #4098 from mitchellh/newsession
aws-sdk: use session.NewSession
2016-11-02 12:25:14 -07:00
Matthew Hooker 9bc23ea512 Merge pull request #4099 from mitchellh/waitfail
Waitfail
2016-11-02 12:21:51 -07:00
James Nugent 36c09af992 builder/amazon: Add tests for the `ebs-volume` builder
These smoke tests are effectively a mirror of the EBS builder tests.
2016-11-02 12:56:39 -04:00
James Nugent b1ff8c3bfc builder/amazon: Add `ebs-volume` builder
This commit adds a builder that works like EBS builders, except does not
create an AMI, and instead is intended to create EBS volumes in an
initialized state. For example, the following template can be used to
create and export a set of 3 EBS Volumes in a ZFS zpool named `data` for
importing by instances running production systems:

```
{
	"variables": {
		"aws_access_key_id": "{{ env `AWS_ACCESS_KEY_ID` }}",
		"aws_secret_access_key": "{{ env `AWS_SECRET_ACCESS_KEY` }}",
		"region": "{{ env `AWS_REGION` }}",
		"source_ami": "{{ env `PACKER_SOURCE_AMI` }}",
		"vpc_id": "{{ env `PACKER_VPC_ID` }}",
		"subnet_id": "{{ env `PACKER_SUBNET_ID` }}"
	},
	"builders": [{
		"type": "amazon-ebs-volume",
		"access_key": "{{ user `aws_access_key_id` }}",
		"secret_key": "{{ user `aws_secret_access_key` }}",
		"region": "{{user `region`}}",
		"spot_price_auto_product": "Linux/UNIX (Amazon VPC)",

		"ssh_pty": true,
		"instance_type": "t2.medium",
		"vpc_id": "{{user `vpc_id` }}",
		"subnet_id": "{{user `subnet_id` }}",
		"associate_public_ip_address": true,
		"source_ami": "{{user `source_ami` }}",
		"ssh_username": "ubuntu",
		"ssh_timeout": "5m",

		"ebs_volumes": [
			{
				"device_name": "/dev/xvdf",
				"delete_on_termination": false,
				"volume_size": 10,
				"volume_type": "gp2",
				"tags": {
					"Name": "TeamCity-Data1",
					"zpool": "data",
					"Component": "TeamCity"
				}
			},
			{
				"device_name": "/dev/xvdg",
				"delete_on_termination": false,
				"volume_size": 10,
				"volume_type": "gp2",
				"tags": {
					"Name": "TeamCity-Data2",
					"zpool": "data",
					"Component": "TeamCity"
				}
			},
			{
				"device_name": "/dev/xvdh",
				"delete_on_termination": false,
				"volume_size": 10,
				"volume_type": "gp2",
				"tags": {
					"Name": "TeamCity-Data3",
					"zpool": "data",
					"Component": "TeamCity"
				}
			}
		]
	}],
	"provisioners": [
	{
		"type": "shell",
		"start_retry_timeout": "10m",
		"inline": [
			"DEBIAN_FRONTEND=noninteractive sudo apt-get update",
			"DEBIAN_FRONTEND=noninteractive sudo apt-get install -y zfs",
			"lsblk",
			"sudo parted /dev/xvdf --script mklabel GPT",
			"sudo parted /dev/xvdg --script mklabel GPT",
			"sudo parted /dev/xvdh --script mklabel GPT",
			"sudo zpool create -m none data raidz xvdf xvdg xvdh",
			"sudo zpool status",
			"sudo zpool export data",
			"sudo zpool status"
		]
	}
	]
}
```

StepModifyInstance and StepStopInstance are now shared between EBS and
EBS-Volume builders - move them into the AWS common directory and rename
them to indicate that they only apply to EBS-backed builders.
2016-11-02 12:56:39 -04:00
Matthew Hooker d47e47cf1f rewrite to not use private aws package 2016-11-01 18:29:18 -07:00
Matthew Hooker c4c46c349e implement security group waiter 2016-11-01 18:10:42 -07:00
Matthew Hooker 970b37077e Merge pull request #4050 from jen20/ssh-agent
builder/amazon: Allow use of local SSH Agent
2016-11-01 17:27:37 -07:00
Matthew Hooker 48bdae93d1 aws-sdk: use session.NewSession 2016-11-01 15:53:04 -07:00
Matthew Hooker 83b57b98ac show ami id found from filter 2016-11-01 15:26:43 -07:00
Matthew Hooker d920b3fbf4 run gofmt 2016-11-01 14:08:04 -07:00
Matthew Hooker 0dd7d7ff3b fix error message 2016-10-31 16:44:18 -07:00
Ganesh kumar Sankaran b9c6139d67 AWS async operations sometimes takes long times, if there are multiple parallel builds, polling at 2 second frequency will exceed the request limit. Allow 2 seconds to be overwritten with AWS_POLL_DELAY_SECONDS 2016-10-31 16:44:18 -07:00
Rickard von Essen d66490ebfd
Properly cleanup AWS temporary key pairs
Closes #4057 - Amazon key pair no longer cleaned up at end of build
2016-10-27 23:06:13 +02:00
Rickard von Essen d16d5d9686 Merge pull request #3817 from ChrisLundquist/dynamic-source-ami
Dynamic source ami
2016-10-25 21:24:41 +02:00
Richard Owen adddc60a1d Fix typo in encrypted ami step log message 2016-10-25 16:01:01 +01:00
James Nugent 395d88941c amazon: Allow SSH Agent auth for existing key pair
This commit allows SSH Agent authentication to be used with an existing
key pair defined in AWS.
2016-10-23 22:26:14 -05:00
James Nugent 7425fef2c7 builder/amazon: Allow use of local SSH Agent
This commit adds an option to use the local SSH Agent to authenticate
connections to source instances started by the the EBS and Instance
Store builders.

This is of use when the source AMI _already_ has configuration for
authorized SSH keys - for example if one uses an SSH certificate
authority.

A further extension (not implemented in this commit) is to allow SSH
agent use with a pre-defined key pair, in order to allow keys with
passphrases to be used without giving the passphrase to Packer.
2016-10-23 21:43:47 -05:00
Asif R Choudhury 48d94342ba Add us-east-2 (Ohio) AWS region 2016-10-17 21:31:41 -05:00
Rickard von Essen c273bd6beb Merge pull request #3789 from jeremy-asher/amazon-ebs-delete-volumes-on-failure
clean up EBS volumes on failure
2016-10-15 14:57:15 +02:00
Rickard von Essen 0be3034e82 Merge pull request #3953 from rickard-von-essen/amz-ssh
builder/amazon: Allow using ssh_private_key_file and ssh_password
2016-10-03 10:22:15 +02:00
Rickard von Essen acc2689b49
builder/amazon: Allow using ssh_private_key_file and ssh_password
This adds support for using amazon-ebs/amazon-instance builder without
a keypair. If a ssh_private_key_file is supplied without a
ssh_keypair_name no temporary ssh keypair is created. If ssh_password is
used no temporary ssh keypair is created and the password is used when
trying to connect.

Closes #2301
Closes #3156
2016-10-02 22:20:36 +02:00
Rickard von Essen cffc8e892c Merge pull request #3382 from ahamidi/encrypted-boot-volume
Create AMI with encrypted boot volume
2016-10-02 01:02:43 +02:00
Chris Lundquist 9379cbc5d9 [dynamic-source-ami] support instance builder too 2016-10-01 23:01:01 +00:00
Chris Lundquist ab3500b45c [dynamic-source-ami] support chroot builder 2016-10-01 22:56:09 +00:00
Chris Lundquist 1b4895c684 Merge remote-tracking branch 'origin/master' into dynamic-source-ami 2016-10-01 22:20:17 +00:00
Matthew Hooker a9abe43325 builder/amazon: add retry login when creating tags.
also move Retry from builder/googlecompute/common to common/retry
2016-09-28 18:22:31 -07:00
Rickard von Essen 13c9db5dd5 Merge pull request #3885 from orivej/on-error
Add -on-error command line argument to allow preserving artifacts on builder errors
2016-09-20 12:28:14 +02:00
Jeremy Asher aea05f6485 fix nil pointer dereference in amazon-chroot
The refactor of StepRegisterAmi to add the from_scratch parameter
incorrectly replaced iteration over image.BlockDeviceMappings with
iteration over the new mapping array when not using from_scratch.  This
fixes the regression and renames the parameters to newMappings and
mappings for better clarity.
2016-09-16 18:35:36 -07:00
Orivej Desh 6762965696 Add -on-error command line argument to allow preserving artifacts on builder errors
Resolves #409
2016-09-16 12:15:00 +00:00
Rickard von Essen 3b47893eb8
builder/amazon: reverted wrongly modified ssh_test's. 2016-09-14 20:26:09 +02:00
Rickard von Essen 067155c344
builder/amazon: guard aginst empty/nil PrivateIpAddress and updated tests. 2016-09-14 00:16:09 +02:00
Rickard von Essen 7f4bee737c Merge pull request #3752 from tarrall/issue3751-ssh-privateip-classic
builder/amazon: Honor ssh_private_ip flag in EC2-Classic, not just VPC
2016-09-13 22:54:00 +02:00
Rickard von Essen 120b60ae37 Merge pull request #3865 from dpiddy/amazon-ssh-retry-fix
amazon/common/ssh: fix saving of instance to state
2016-09-12 15:04:35 +02:00
Dan Peterson c7af9a67bc amazon/common/ssh: fix saving of instance to state
Fixes #3496
2016-09-09 10:16:53 -03:00