010d171bec
GuestAdditionsMode and GuestAdditionsPath can be set in config. If GuestAdditionsMode == "attach" it will mount the HyperV Integration Services ISO. If GuestAdditionsPath is set, then it will be used as an alternative to where the HyperV Integration Service ISO is.
...
Included the build step to download ISO, so iso_urls works properly now.
Online activation should be done via provisioner
Installation of integration services should be done via provisioner
Cleaned up the way dvd drives are mounted and unmounted (still need to implement feature to find unused drives before adding a new one)
Cleaned up the way floppies are mounted and unmounted
2016-12-12 22:44:27 +00:00
422efeeaf6
Make use of driver instead of directly referencing hyper
...
Move inline powershell to hyperv
2016-12-12 22:44:26 +00:00
730c6217ad
Fix disk size test
...
Default minimum and maximum sizes were geared towards spinning up windows server instances. Linux instances are far more efficient and make do with lower requirements. Set the minimum sizes to match this.
2016-12-12 22:44:21 +00:00
9f94834826
Use correct formatting for printf
2016-12-12 22:44:19 +00:00
54733323a8
Should only default to first controller if its not 1 of the 2 controllers available
2016-12-12 22:44:18 +00:00
c24c882b84
Use simple naming convention for now
2016-12-12 22:44:16 +00:00
5f2c12324c
No need to remove floppy controller for 2nd generation vms
...
Don't want to be prompted for confirmation from powershell commandlets
2016-12-12 22:44:14 +00:00
837f9addd0
Check the floppy files and not the dvd files attached
2016-12-12 22:44:13 +00:00
4e8074d7e5
Need to expose generation as a public property
2016-12-12 22:44:13 +00:00
e18594f404
Hyperv generation 2 machines use scsi for dvd drives. Allow gen 1 machines to have at least 1 iso image attached
2016-12-12 22:44:12 +00:00
ef507c7bd7
Pass in any iso images to add as dvd drives during boot
2016-12-12 22:44:11 +00:00
3051ea6633
Quote powershell so that it does not try to interpret command to be run
...
Get VName out of state. This allows template replacement to be run on vmname
2016-12-12 22:44:10 +00:00
f3cc413bbb
Set the dvd to the first boot device
2016-12-12 22:44:08 +00:00
02db768018
With generation 2 machine by default a dvd drive is not created. So create a dvd drive for os if it does not exist.
...
Allow secure boot mode to be configured from config.
2016-12-12 22:44:07 +00:00
aa1f1da1ff
Support for boot_command
...
Setup local http server
Add compaction of hard drive
GetHostAdapterIpAddress function added for hyperv
renamed step step_start_vm to step_run to fall in ine with naming conventions of other builders
2016-12-12 22:44:07 +00:00
03b0698edd
Remove devices after it has been shut down
...
Attempt to stop vm, before deleting it
2016-12-12 22:44:06 +00:00
2d7cfcd65d
Throw error if we can't get mac or ip address during steps
2016-12-12 22:44:05 +00:00
87b3dec3d2
Wait until WinRM is available, before continuing with install. This is how other system like VeeWee do it.
...
Add support for number of cpus to use for vm
Add support for vm generation
2016-12-12 22:44:04 +00:00
79a5f90379
Use the convention for default vmname
...
Use the convention for default hdd size
Tests added for builder
2016-12-12 22:44:04 +00:00
a42215981e
The test is meant to fail if the folder already exists
2016-12-12 22:44:02 +00:00
ca16f33fa3
Use the same configuration style as existing builders
...
Move builder into correctly named folder
2016-12-12 22:44:02 +00:00
1fe4c501e4
Port of https://github.com/pbolduc/packer-hyperv/
...
Remove steps that are windows specific
2016-12-12 22:44:01 +00:00
f1fb942219
add ca-central-1 to list of known aws regions.
...
resolves #4273
2016-12-09 11:21:44 -08:00
a46c071143
fix regex. need to account of XXhYYm etc
2016-12-08 15:12:48 -08:00
1e96aa845b
fix wait boot_command regex.
...
Resolves #4268
2016-12-08 15:12:40 -08:00
d3ddd99721
Merge pull request #4163 from StackPointCloud/packer-builder-oneandone
...
Packer Builder 1&1
2016-12-08 14:07:35 -08:00
91562636d4
Allow reauth to keystone after token expiry
2016-12-07 01:36:10 +00:00
5c4d331a34
Added missing LaunchPermission
2016-12-06 09:59:09 +01:00
4ce3b8712a
Replace unencrypted EBS snapshots with encrypted
...
To ensure that groups and users attributes are added to the encrypted
snapshots.
2016-12-06 03:31:09 +01:00
038787ed48
Refactored to gather scan codes into groups to be sent to VirtualBox's console.
2016-12-04 11:28:18 -07:00
c3a352955e
amazon: Added snapshot_users and snapshot_groups
2016-12-04 16:03:01 +01:00
46f217f255
amazon - Snapshot permissions correctly applied
...
Fixes #3344
2016-12-04 16:03:01 +01:00
d7a7d8c852
It's not possible to share encrypted AMI's
2016-12-04 15:52:23 +01:00
12f279fa79
add ability to set a different project-id for a network in the googlecloud builder
2016-12-02 15:22:36 -06:00
8b13b75097
Updated documentation and error messages
...
The docs for kms_key_id needed to be next to encrypt_boot.
Shortened some of the kms_key_id error messages.
2016-12-03 07:49:54 +11:00
7ea17e1630
Allow custom encrypted AMIs to be shared
...
When using a custom KMS key to encrypt the boot volume of an AMI, packer should allow it to be shared with other users.
2016-12-03 07:49:54 +11:00
3eed6fd508
Added KMS CMK support to EBS builder
...
Added the 'kms_key_id' parameter. This supports supplying a customer master key (CMK) when encrypting the EBS volume.
The parameter is optional and only takes effect when 'encrypted' is true. When 'encrypted' is true but 'kms_key_id' is missing the 'aws/ebs' key will be used.
2016-12-03 07:49:34 +11:00
8d2ceea5f1
builder/amazon: crash on tagging snapshot when snapshot_tags is unset
...
Closes #4238
2016-12-01 20:43:15 +01:00
bcc7f455b3
amazon: Fix source_ami_filter ignores owners
2016-12-01 14:29:31 +01:00
576f6f1b39
Fixes acceptance test
...
The original acceptance test required a manual check. This one does
not.
2016-11-30 22:58:19 -05:00
832de2104b
Revert "Merge pull request #4230 from mitchellh/revert-4223-closes_3320"
...
This reverts commit bda89b0c42f9f9d82419
2016-11-30 13:28:34 -08:00
f5c3c25d2b
Revert "Adds `force_delete_snapshot` flag"
2016-11-30 13:10:22 -08:00
f9f9d82419
Merge pull request #4223 from artburkart/closes_3320
...
Adds `force_delete_snapshot` flag
2016-11-30 12:53:34 -08:00
5b59f56cdb
Adds `force_delete_snapshot` flag
...
This PR adds the ability for Packer to clean up snapshots in addition to
deregistering AMIs at build time.
To test this, I used the following `test.json` file:
```json
{
"builders": [
{
"type": "amazon-ebs",
"region": "us-east-1",
"source_ami": "ami-fce3c696",
"ami_name": "packer-test",
"instance_type": "m3.medium",
"ssh_username": "ubuntu",
"vpc_id": "some-vpc-id",
"subnet_id": "some-subnet-routed-through-igw",
"security_group_id": "some-security-group-with-port-22-access",
"force_delete_snapshot": true
}
],
"provisioners": [
{
"type": "shell-local",
"command": "echo 'hello'"
}
]
}
```
I appreciate any constructive feedbakc that can be given. Cheers!
2016-11-29 23:39:36 -05:00
99ee610afa
builder/amazon: Fix SSH Agent
...
Closes #4220
2016-11-29 22:33:53 +01:00
6c546d4d1f
Merge pull request #3982 from artburkart/close_1195
...
Support remote ova downloads
2016-11-28 18:49:50 -08:00
aedf4ca465
Merge pull request #4141 from mitchellh/ebsvoluemartifact
...
add ebsvolume artifact
2016-11-28 15:50:03 -08:00
50267572a4
add ebsvolume artifact
2016-11-28 15:26:09 -08:00
337856811e
Implements OVA downloads w/local checksum support
...
Presumably, it is convention to store a manifest file with checksums
inside the OVA, so remote checksum support was not implemented.
2016-11-28 15:01:37 -05:00
e36b98ecd5
Merge pull request #4202 from nervo/docker-commit-changes
...
Introduce docker commit changes
2016-11-26 18:40:08 +01:00
a09f20f996
Merge pull request #4015 from artburkart:closes_3908
...
Closes #3908 : Adds snapshot tag overrides
2016-11-26 17:54:00 +01:00
0c7e73b1cf
Implements Snapshot tagging
...
While implementing my acceptance test, I stumbled upon a comment stating
that snapshot deletion should also be implemented, so I snuck that in. I
can't help but wonder if there is some generic logic that is implemented
a few times throughout the packer code base that could maybe better serve
us if it were abstracted to the common package.
2016-11-26 17:48:26 +01:00
6947a74151
Merge pull request #4162 from classmarkets/google-source-image-family
...
builder/googlecompute: support source image family
2016-11-26 17:26:47 +01:00
d18da5e679
Added printout of select source_image
2016-11-26 15:06:43 +01:00
17eda06d61
Fixed formatting
2016-11-24 21:12:20 +01:00
e53f4be005
Fix 'The AssociatePublicIpAddress parameter is only supported for VPC launches.'
2016-11-24 17:01:32 +01:00
73c5eac4f0
Handle commit author & message the same way
2016-11-24 13:33:42 +01:00
06bebb63d0
Add log
2016-11-24 13:07:01 +01:00
c925acf502
Introduce docker commit changes
2016-11-24 11:42:34 +01:00
8257c2dabd
Merge pull request #4172 from rickard-von-essen/default-ssh-user
...
ssh: Remove ssh_username default values
2016-11-17 22:40:09 +01:00
96e9a8e6e9
Removed default value for ssh_username
2016-11-17 22:30:34 +01:00
68ca7490bb
Removed default value for ssh_username
2016-11-17 21:15:28 +01:00
285ff6940e
Revert some changes made in #4149 ( #4175 )
...
After some more research and testing it turns out we can support the use case where you want to reuse an associated IP address that already has port 22 or 5985 forwarded, by using a random public port.
The correct port to open in the firewall is different for the type of firewall used. The standard firewall requires the public port to be opened and the network ACL requires the private port to be opened.
So by partially reverting this code and updating which ports to open in which cases, we can support all use cases again.
2016-11-16 10:30:32 +01:00
2e65867cba
Closes #3908 : Adds snapshot tag overrides
...
This commit adds the ability to configure unique tags on snapshots
that are separate from the tags defined on the AMI. Anything applied
to the AMI will also be applied to the snapshots, but `snapshot_tags`
will override and append tags to the tags already applied to the snapshots
2016-11-15 23:16:27 -05:00
5649940fab
Removed unecessary print messages
2016-11-16 00:20:22 +01:00
484960c9d1
Fixes #4169
2016-11-16 00:17:30 +01:00
9a91ae4e8f
fix new session error when creating cred chain.
...
the old and deprecated method won't error and so is safe to use
even if we're not in amazon.
2016-11-14 11:39:22 -08:00
dc231f9600
PR remarks
2016-11-13 23:54:55 +01:00
4bcba37f38
Packer Builder 1&1
2016-11-13 23:34:36 +01:00
bcb319640e
builder/googlecompute: support source image family
...
Closes #4100
2016-11-13 16:54:04 +01:00
68c6835bb5
Do not create a random public port ( #4149 )
...
This is meant to be a gentle solution for a very specific use case, but is causing more issues then it solves.
If you have a port conflict when trying to use an already associated public IP, the easiest way around it is to let the builder associate a new temporary public IP address.
2016-11-10 13:59:58 +01:00
d1eadd91bb
Fix cloudstack builder ( #4139 )
...
* add zone id when associate ip address in cloudstack
* configure keypair
* fix bug firewall port
2016-11-10 13:21:08 +01:00
d81c06765d
fix go vet issue.
...
closes #4130
2016-11-07 10:17:53 -08:00
6088c1887c
Fix keycodes for ctrl,shift and alt key when sending over VNC
2016-11-04 19:26:14 +09:00
33f430bf25
Use the private port for the firewall rules ( #4114 )
...
Because of how CloudStack configures the firerwall on the router VM, you need to allow traffic to the private port instead of the public port.
2016-11-04 09:56:49 +01:00
5d0892bd37
Merge pull request #4101 from lwander/f-googlecompute-ssh-private-key-file
...
builder/googlecompute: Use ssh_private_key_file if provided
2016-11-03 11:04:02 -07:00
583e341ae7
builder/googlecompute: Store empty public_key
2016-11-03 12:49:09 -04:00
7f474d8f78
builder/googlecompute: Tests added
2016-11-03 12:45:52 -04:00
85210afe92
googlecompute: conditionally omit the wait for startup script step if no startup script is provided.
2016-11-02 15:20:21 -07:00
d70e783455
builder/googlecompute: Use ssh_private_key_file if provided
...
This seemed to be missing from the googlecompute provider. Now if the
ssh_private_key_file is provided, that will be used in place of a temporary
key. I didn't update the googlecompute specific docs under `./website/`, since
this parameter is already documented under the communicators templates page.
2016-11-02 17:04:34 -04:00
f3f5f89fe6
Merge pull request #4096 from mitchellh/filterday
...
builder/amazon-ebs: show ami id found from filter
2016-11-02 12:25:46 -07:00
60c459d6c8
Merge pull request #4098 from mitchellh/newsession
...
aws-sdk: use session.NewSession
2016-11-02 12:25:14 -07:00
9bc23ea512
Merge pull request #4099 from mitchellh/waitfail
...
Waitfail
2016-11-02 12:21:51 -07:00
36c09af992
builder/amazon: Add tests for the `ebs-volume` builder
...
These smoke tests are effectively a mirror of the EBS builder tests.
2016-11-02 12:56:39 -04:00
b1ff8c3bfc
builder/amazon: Add `ebs-volume` builder
...
This commit adds a builder that works like EBS builders, except does not
create an AMI, and instead is intended to create EBS volumes in an
initialized state. For example, the following template can be used to
create and export a set of 3 EBS Volumes in a ZFS zpool named `data` for
importing by instances running production systems:
```
{
"variables": {
"aws_access_key_id": "{{ env `AWS_ACCESS_KEY_ID` }}",
"aws_secret_access_key": "{{ env `AWS_SECRET_ACCESS_KEY` }}",
"region": "{{ env `AWS_REGION` }}",
"source_ami": "{{ env `PACKER_SOURCE_AMI` }}",
"vpc_id": "{{ env `PACKER_VPC_ID` }}",
"subnet_id": "{{ env `PACKER_SUBNET_ID` }}"
},
"builders": [{
"type": "amazon-ebs-volume",
"access_key": "{{ user `aws_access_key_id` }}",
"secret_key": "{{ user `aws_secret_access_key` }}",
"region": "{{user `region`}}",
"spot_price_auto_product": "Linux/UNIX (Amazon VPC)",
"ssh_pty": true,
"instance_type": "t2.medium",
"vpc_id": "{{user `vpc_id` }}",
"subnet_id": "{{user `subnet_id` }}",
"associate_public_ip_address": true,
"source_ami": "{{user `source_ami` }}",
"ssh_username": "ubuntu",
"ssh_timeout": "5m",
"ebs_volumes": [
{
"device_name": "/dev/xvdf",
"delete_on_termination": false,
"volume_size": 10,
"volume_type": "gp2",
"tags": {
"Name": "TeamCity-Data1",
"zpool": "data",
"Component": "TeamCity"
}
},
{
"device_name": "/dev/xvdg",
"delete_on_termination": false,
"volume_size": 10,
"volume_type": "gp2",
"tags": {
"Name": "TeamCity-Data2",
"zpool": "data",
"Component": "TeamCity"
}
},
{
"device_name": "/dev/xvdh",
"delete_on_termination": false,
"volume_size": 10,
"volume_type": "gp2",
"tags": {
"Name": "TeamCity-Data3",
"zpool": "data",
"Component": "TeamCity"
}
}
]
}],
"provisioners": [
{
"type": "shell",
"start_retry_timeout": "10m",
"inline": [
"DEBIAN_FRONTEND=noninteractive sudo apt-get update",
"DEBIAN_FRONTEND=noninteractive sudo apt-get install -y zfs",
"lsblk",
"sudo parted /dev/xvdf --script mklabel GPT",
"sudo parted /dev/xvdg --script mklabel GPT",
"sudo parted /dev/xvdh --script mklabel GPT",
"sudo zpool create -m none data raidz xvdf xvdg xvdh",
"sudo zpool status",
"sudo zpool export data",
"sudo zpool status"
]
}
]
}
```
StepModifyInstance and StepStopInstance are now shared between EBS and
EBS-Volume builders - move them into the AWS common directory and rename
them to indicate that they only apply to EBS-backed builders.
2016-11-02 12:56:39 -04:00
d47e47cf1f
rewrite to not use private aws package
2016-11-01 18:29:18 -07:00
c4c46c349e
implement security group waiter
2016-11-01 18:10:42 -07:00
970b37077e
Merge pull request #4050 from jen20/ssh-agent
...
builder/amazon: Allow use of local SSH Agent
2016-11-01 17:27:37 -07:00
48bdae93d1
aws-sdk: use session.NewSession
2016-11-01 15:53:04 -07:00
83b57b98ac
show ami id found from filter
2016-11-01 15:26:43 -07:00
d920b3fbf4
run gofmt
2016-11-01 14:08:04 -07:00
0dd7d7ff3b
fix error message
2016-10-31 16:44:18 -07:00
b9c6139d67
AWS async operations sometimes takes long times, if there are multiple parallel builds, polling at 2 second frequency will exceed the request limit. Allow 2 seconds to be overwritten with AWS_POLL_DELAY_SECONDS
2016-10-31 16:44:18 -07:00
01be917450
Merge pull request #3660 from StackPointCloud/packer-builder-profitbricks
...
Packer Builder ProfitBricks
2016-10-31 15:45:24 -07:00
93f0436766
Merge pull request #3909 from svanharmelen/f-cloudstack-builder
...
Add a CloudStack builder
2016-10-31 13:34:20 -07:00
f69ee4634f
Merge pull request #4041 from mitchellh/vmwareshutdown
...
VIP: VMware shutdown fails
2016-10-31 11:37:00 -07:00
d66490ebfd
Properly cleanup AWS temporary key pairs
...
Closes #4057 - Amazon key pair no longer cleaned up at end of build
2016-10-27 23:06:13 +02:00
d16d5d9686
Merge pull request #3817 from ChrisLundquist/dynamic-source-ami
...
Dynamic source ami
2016-10-25 21:24:41 +02:00
adddc60a1d
Fix typo in encrypted ami step log message
2016-10-25 16:01:01 +01:00
395d88941c
amazon: Allow SSH Agent auth for existing key pair
...
This commit allows SSH Agent authentication to be used with an existing
key pair defined in AWS.
2016-10-23 22:26:14 -05:00
7425fef2c7
builder/amazon: Allow use of local SSH Agent
...
This commit adds an option to use the local SSH Agent to authenticate
connections to source instances started by the the EBS and Instance
Store builders.
This is of use when the source AMI _already_ has configuration for
authorized SSH keys - for example if one uses an SSH certificate
authority.
A further extension (not implemented in this commit) is to allow SSH
agent use with a pre-defined key pair, in order to allow keys with
passphrases to be used without giving the passphrase to Packer.
2016-10-23 21:43:47 -05:00
d6bed79429
wait for shutdown command to end so we get stderr/out
2016-10-22 10:33:27 -07:00
da7d317e46
googlecompute: Run instance with custom scopes
2016-10-22 15:46:14 +09:00
e9a5d05a2f
builder/vmware: Ignore shutdown errors
...
Resolves issue where `shutdown_command` would error because the remote
side disconnected, which we should have expected and ignored.
2016-10-21 22:41:45 -07:00
f9f47c5bbb
fix shell disconnect error when shutting down vmware
2016-10-21 22:26:34 -07:00
48d94342ba
Add us-east-2 (Ohio) AWS region
2016-10-17 21:31:41 -05:00
4a00ffeea2
Closes #3999 - Support VirtualBox Trim/Discard
...
Adds a couple options to enable/disable the `--nonrotational` and
`--discard` flags during `VBoxManage storageattach` command execution
2016-10-17 08:52:28 -04:00
dbf3bf56d4
Add a CloudStack Builder
2016-10-16 15:29:18 +02:00
c273bd6beb
Merge pull request #3789 from jeremy-asher/amazon-ebs-delete-volumes-on-failure
...
clean up EBS volumes on failure
2016-10-15 14:57:15 +02:00
f908e18483
Merge pull request #3996 from boumenot/pr-issue-3968
...
azure: Allow user to set custom data
2016-10-13 13:39:54 -07:00
7d07fa7afc
azure: Allow user to set custom data
2016-10-13 11:56:23 -07:00
bba643df9a
azure: handle os_type errors more gracefully
2016-10-13 09:26:29 -07:00
249a943a1e
azure: Allow user to override size of OS disk
2016-10-12 16:24:04 -07:00
5da380baed
Error handling
...
Minor typo fixes
2016-10-13 00:41:04 +02:00
3c8dabba9e
Fixed formatting
2016-10-11 23:43:50 +02:00
dca286bf38
Merge remote-tracking branch 'upstream/master' into packer-builder-profitbricks
2016-10-10 23:53:52 +02:00
ba8cfbd222
builder/openstack: Support using SSH password.
...
This adds support for using ssh_password to connect to a OpenStack
instance. If ssh_password is defined creation of the temporary keypair
is skipped.
2016-10-08 23:18:19 +02:00
5e96709ee9
Merge pull request #2919 from arizvisa/floppy-recurse
...
Added an option for copying entire subdirectories via floppy_dirs (supplants floppy_files)
2016-10-08 16:51:16 +02:00
badadec140
Merge pull request #3758 from elconas/fix_vmware_builder
...
Fix License check to work with licensed VMware Workstation
2016-10-07 17:51:32 -07:00
b7e14c4354
Merge pull request #3952 from MikeStankavich/f-virtualbox-post-shutdown-delay
...
Add VirtualBox post shutdown delay to address floppy controller delet…
2016-10-03 16:23:02 -07:00
127142215a
Merge pull request #3954 from emo3/f-keepreq-vb
...
added functionality like vm
2016-10-03 12:55:34 -07:00
1adb0a5fc3
added functionality like vm
2016-10-03 15:11:21 -04:00
0be3034e82
Merge pull request #3953 from rickard-von-essen/amz-ssh
...
builder/amazon: Allow using ssh_private_key_file and ssh_password
2016-10-03 10:22:15 +02:00
acc2689b49
builder/amazon: Allow using ssh_private_key_file and ssh_password
...
This adds support for using amazon-ebs/amazon-instance builder without
a keypair. If a ssh_private_key_file is supplied without a
ssh_keypair_name no temporary ssh keypair is created. If ssh_password is
used no temporary ssh keypair is created and the password is used when
trying to connect.
Closes #2301
Closes #3156
2016-10-02 22:20:36 +02:00
a187b1cf92
Add VirtualBox post shutdown delay to address floppy controller delete error per issue #2401
2016-10-02 13:12:40 -05:00
cffc8e892c
Merge pull request #3382 from ahamidi/encrypted-boot-volume
...
Create AMI with encrypted boot volume
2016-10-02 01:02:43 +02:00
9379cbc5d9
[dynamic-source-ami] support instance builder too
2016-10-01 23:01:01 +00:00
ab3500b45c
[dynamic-source-ami] support chroot builder
2016-10-01 22:56:09 +00:00
1b4895c684
Merge remote-tracking branch 'origin/master' into dynamic-source-ami
2016-10-01 22:20:17 +00:00
3ad7f067ab
Merge pull request #2784 from orivej/fix-ssh-port-max
...
Make ssh_host_port_max an inclusive bound to agree with documentation
2016-10-02 00:12:37 +02:00
29ae078326
Added missing virtualbox floppy_dirs
2016-10-01 09:05:10 +02:00
924c0bc461
Merge pull request #3932 from pieter-lazzaro/googlecompute-createpassword
...
GCE Windows instance password creation
2016-09-30 22:01:56 +02:00
c0a4067151
builder/googlecompute: Print out WinRM password in debug mode.
2016-09-30 21:17:38 +02:00
a8e57d83d2
gofmt project.
...
noticed many unrelated changes being added to patches because of gofmt.
ran `find . -not -path "./vendor/*" -name "*.go" -exec gofmt -w {} \;`
2016-09-29 14:13:06 -07:00
a9abe43325
builder/amazon: add retry login when creating tags.
...
also move Retry from builder/googlecompute/common to common/retry
2016-09-28 18:22:31 -07:00
bfb075e505
Renamed artefact -> artifact
2016-09-29 00:04:14 +02:00
a092701aea
Renamed artefact -> artifact
2016-09-28 23:57:37 +02:00
3dc7873b21
Merge pull request #3936 from boumenot/pr-azure-error-message
...
azure: fix error message
2016-09-28 14:17:33 -07:00
e42b3d8447
azure: fix error message
...
There have been two issues raised where the user followed the error
message, but they needed to add yet another config value to disambiguate
the VNET. It would be better if the message over corrected, and asked the
user to specify everything to ensure complete disambiguation.
2016-09-28 09:50:10 -07:00
343c594bb3
Added UserDataFile support for DigitalOcean builder config.
2016-09-28 15:00:57 +02:00
86c00490e9
Renamed any and all instances of the word "FloppyContents" to "FloppyDirectories".
...
Ensure that all builders include FloppyDirectories in the StepCreateFloppy options.
Changed the way the unit-tests in common/step_create_floppy_test work to use the static test-fixtures directory instead of creating the paths dynamically.
Removed a duplicate line of documentation from parallels-pvm.html.md that occurred during rebasing.
2016-09-27 23:31:42 -05:00
5db1c1f503
Create a password for windows instances when using WinRM communicator and no password is provided.
2016-09-27 18:42:34 -04:00
ef1517064c
googlecompute/builder: Always show message when checking image exists
2016-09-24 21:12:25 +02:00
4605f9559f
Fix unreachable code
2016-09-23 20:38:28 +02:00
6f545af7f7
builder/googlecompute: -force
2016-09-23 14:21:43 +02:00
c95aab5e0e
Merge pull request #3888 from yoctocloud/qemu
...
builder/qemu: specify disk format to avoid errors
2016-09-22 08:43:40 +02:00
06e3539ffa
Merge pull request #3767 from taliesins/ExtendScanCodes
...
Add support for ctrl, shift and alt keys and using them as key modifier.
2016-09-20 21:36:46 +02:00
9ce70bfce0
Merge pull request #3338 from yuki-takeichi/gce-nvme
2016-09-20 12:50:43 +02:00
04078c5c48
Enable to select NVMe images for googlecompute builder
2016-09-20 12:47:14 +02:00
13c9db5dd5
Merge pull request #3885 from orivej/on-error
...
Add -on-error command line argument to allow preserving artifacts on builder errors
2016-09-20 12:28:14 +02:00
476d981211
Merge pull request #3800 from benwtr/issue-3142-match-dotfiles-docker-communicator
...
Fix file provisioner dotfile matching w/ docker builder
2016-09-20 12:25:37 +02:00
7cbb98f2d5
QemuArggs -> QemuArgs
...
Avast ye, resolves #3901
2016-09-19 14:34:13 -07:00
aea05f6485
fix nil pointer dereference in amazon-chroot
...
The refactor of StepRegisterAmi to add the from_scratch parameter
incorrectly replaced iteration over image.BlockDeviceMappings with
iteration over the new mapping array when not using from_scratch. This
fixes the regression and renames the parameters to newMappings and
mappings for better clarity.
2016-09-16 18:35:36 -07:00
6762965696
Add -on-error command line argument to allow preserving artifacts on builder errors
...
Resolves #409
2016-09-16 12:15:00 +00:00
4986ef39b2
builder/qemu: specify disk format to avoid errors
...
Image format was not specified for XXX and probing
guessed raw.
Automatically detecting the format is dangerous for raw images, write
operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
2016-09-15 17:59:05 +03:00
3b47893eb8
builder/amazon: reverted wrongly modified ssh_test's.
2016-09-14 20:26:09 +02:00
178748bb7c
Merge remote-tracking branch 'upstream/master' into packer-builder-profitbricks
2016-09-14 15:32:30 +02:00
2008c6019a
Addressing PR remarks
2016-09-14 15:05:45 +02:00
067155c344
builder/amazon: guard aginst empty/nil PrivateIpAddress and updated tests.
2016-09-14 00:16:09 +02:00
7f4bee737c
Merge pull request #3752 from tarrall/issue3751-ssh-privateip-classic
...
builder/amazon: Honor ssh_private_ip flag in EC2-Classic, not just VPC
2016-09-13 22:54:00 +02:00
3ab49595e6
Merge pull request #3681 from yoctocloud/communicator
...
builder/qemu: dont fail on communicator set to none
2016-09-13 22:45:12 +02:00
325401eaf0
Merge remote-tracking branch 'upstream/master' into packer-builder-profitbricks
2016-09-13 12:06:45 +02:00
a3f0308e92
Re-implemented the support for the floppy_files keyword in order to remain backwards-compatible with templates using the old syntax.
...
Moved the support for recursive paths from the floppy_files keyword to the new floppy_contents keyword.
Shifted some of the code around to add better logging of what's actually being copied.
Added a couple of unit-tests for the new floppy_contents implementation.
Ensured that all files that were being added were also being included in state.FilesAdded so that the older unit-tests will work.
2016-09-12 11:56:25 -05:00
120b60ae37
Merge pull request #3865 from dpiddy/amazon-ssh-retry-fix
...
amazon/common/ssh: fix saving of instance to state
2016-09-12 15:04:35 +02:00
10cba9795f
Merge pull request #3476 from bhcleek/ansible-with-docker
...
fix docker builder with ansible provisioner
2016-09-12 13:56:28 +02:00
ed1b664d65
Merge pull request #3855 from jeremy-asher/chroot-from-scratch
...
amazon-chroot build AMI from scratch
2016-09-12 13:48:04 +02:00
c3861d1675
Merge pull request #3856 from rickard-von-essen/ecr-support
...
Improved support for Amazon EC2 Container Registry - ECR
2016-09-12 13:43:41 +02:00
1ca79ad0cb
Merge pull request #3873 from crunk1/master
...
With testify deps fix.
2016-09-12 12:54:25 +02:00
5cbc36103e
Merge pull request #3756 from ricardclau/floppy_check
...
Test floppy disks actually exist
2016-09-12 08:05:16 +02:00
b54b82d3ac
Some googlecompute fixes and cleanup. Addresses https://github.com/mitchellh/packer/issues/3829 . Changes:
...
- startup scripts don't run for Windows since it is isn't implemented yet.
- startup scripts use instance metadata instead of serial port output to flag when they are done.
- added licenses to Image data type (to check if an Image is a Windows Image).
- added GetImage and GetImageFromProject to googlecompute Drivers.
- changed some of the builder/googlecompute tests to use github.com/stretchr/testify/assert.
Tests:
- (in the Packer directory) `go test .`, `go test ./builder/googlecompute`, and `go test ./post-processor/googlecompute-export`
- manual run of `packer build packer_template.json` with the following files
--packer_template.json--
{
"builders": [
{
"type": "googlecompute",
"account_file": "creds.json",
"project_id": "google.com:packer-test",
"source_image": "debian-8-jessie-v20160629",
"zone": "us-central1-a",
"startup_script_file": "startup_script.sh",
"metadata": {
"startup-script": "#!/bin/sh\necho \"This should be overwritten.\"",
"startup-script-log-dest": "gs://packer-test.google.com.a.appspot.com/startup-script.log"
},
"image_name": "test-packer-modifications",
"ssh_username": "foo"
}
],
"post-processors": [
{
"type": "googlecompute-export",
"paths": [
"gs://packer-test.google.com.a.appspot.com/foo.tar.gz",
"gs://packer-test.google.com.a.appspot.com/bar.tar.gz"
],
"keep_input_artifact": true
}
]
}
--startup_script.sh--
\#!/bin/sh
echo "Hi, my name is Scott. I'm waiting 60 seconds!" >> /scott
sleep 60
echo "I'm done waiting!" >> /scott
2016-09-09 16:22:50 -07:00
c7af9a67bc
amazon/common/ssh: fix saving of instance to state
...
Fixes #3496
2016-09-09 10:16:53 -03:00
f446c1a1b7
builders/digitalocean: fixes timeout waiting for snapshot #3853
2016-09-08 10:32:43 +02:00
b2d9782a9e
Improved support for Amazon EC2 Container Registry - ECR
...
This adds support for authenticating towards ECR in the docker builder
and docker-push post-processor using them same mechanisms as in the
amazon builders. I.g. access key/secret key, credentials on file,
environment variables, sts tokens or IAM instance roles.
2016-09-04 14:33:47 +02:00
1c392b23f9
generate warnings for unused options with from_scratch
2016-09-03 12:32:43 -07:00
ef0c7543e1
add amazon-chroot post mount commands
...
This adds an additional PostMountCommands step to the amazon-chroot
builder which executes after the volume is mounted, but before the
extra chroot mounts and copy step.
2016-09-03 12:32:41 -07:00
5e8b697a76
add from_scratch option to amazon-chroot builder
...
This provides an alternate mode for the amazon-chroot builder which uses
a blank volume to build the image. It adds StepPreMountCommands to
permit partitioning and format commands to be executed before mounting
the new volume.
2016-09-03 12:28:22 -07:00
85ae04bb75
split up BlockDevices in amazon/common
...
This breaks up the two options provided by BlockDevices into separate
structs to allow only one of them to be used by the amazon-chroot
builder.
2016-09-03 09:58:45 -07:00
defdd1ecf3
Merge remote-tracking branch 'origin/master' into dynamic-source-ami
2016-09-02 01:43:03 +00:00
16158622fe
Merge pull request #3836 from mahcsig/3833-incorrect-ssh-port
...
Issue 3833 - fix for port error in PR 3347
2016-09-01 20:52:56 +02:00
d84b3af863
Fixed tests
2016-08-31 14:11:10 +02:00
8f8907ee13
Merge remote-tracking branch 'upstream/master' into packer-builder-profitbricks
2016-08-31 13:56:51 +02:00
5caa54acd7
Addressed all the comments
2016-08-31 13:55:11 +02:00
ba629922c6
Merge pull request #3662 from ryansb/boost-spot-bid
...
(AWS Spot) Add 0.5 cents to discovered spot price
2016-08-27 03:18:59 +02:00
0c1051a017
GCE builder: Switch to google.DefaultClient ( #3655 )
...
* GCE builder: Switch to google.DefaultClient
This enables authentication through an authenticated gcloud tool.
* GCE builder: Add docs about auth mech precedence
2016-08-27 03:12:55 +02:00
c1e129848c
3833 - fix for port in MR3347
2016-08-26 20:58:04 +00:00
d01fb65dcf
Fix. Use temporary_key_pair_name when specified. ( #3739 )
...
Fix: Use temporary_key_pair_name when specified.
This is to fix an issue where the temporary_key_pair_name configuration option
for amazon-ebs and amazon-instance builders would be ignored and replaced with
an automatically generated value using UUID, even when the option was explicitly
specified.
Remove space from the auto-generated SSH key-pair name.
Resolves #3736
2016-08-25 09:17:57 +02:00
d02b106a16
Fix for issue #2972 - Implemented ssh_host for virtualbox builders ( #3617 )
2016-08-24 18:30:26 +02:00
3cc8d35450
[dynamic-source-ami] fix old key name in error message
2016-08-21 00:58:01 +00:00
b4d20706ce
[dynamic-source-ami] add some very basic tests
2016-08-21 00:29:51 +00:00
57e7a1a3e6
[dynamic-source-ami] fix lint error
2016-08-21 00:07:58 +00:00
95afaa58ca
[dynamic-source-ami] rename to source_ami_filter
2016-08-20 23:34:22 +00:00
0e248f1516
[dynamic-source-ami] make most_recent work
2016-08-20 23:08:45 +00:00
ec1abb9448
[dynamic-source-ami] proof of concept
2016-08-20 18:58:36 +00:00
6cd7ad82bb
Fixed dupliceted test
2016-08-19 14:34:24 +02:00
3e1aed9a6f
Enable to disable vnc password for VMware builder
2016-08-19 13:26:23 +02:00
f961ce701b
Adds password protection for VNC on VMWare
2016-08-19 13:26:16 +02:00
9489c83f0f
If the VM has more than one NIC, loop through until we find one that works ( #3347 )
2016-08-19 13:23:43 +02:00
832d45023b
Re-introduce case sensitive vmx key functionality ( #2707 )
...
Add case sensitive vmx key functionality
2016-08-19 13:23:07 +02:00
4ac6e2a08c
Dont check for poweron command error to force retry at state check ( #3195 )
2016-08-19 13:21:50 +02:00
6ce847e720
Do not add remotedisplay.vnc.ip to vmx data on ESXi
...
* The remotedisplay.vnc.ip vmx data key breaks ESXi, this commit prevents it
from being automatically added during VNC configuration when using the ESX5
driver.
* It can still be configured via the vmx_data section of the builder
template
Signed-off-by: Sunjay Bhatia <sbhatia@pivotal.io>
2016-08-19 13:19:04 +02:00
Taliesin Sisson
Taliesin Sisson
Matthew Hooker
Dave Buckley
Rickard von Essen
Brian Ruff
Ari Aviran
Troy Toman
poida
Arthur Burkart
ephemeralsnow
Florian Rey
jasminSPC
Sander van Harmelen
Peter Schultz
nyankichi820
febc.yamamoto
Lars Wander
Scott Crunkleton
James Nugent
Ganesh kumar Sankaran
Richard Owen
YAMADA Tsuyoshi
Asif R Choudhury
Christopher Boumenot
Christopher Boumenot
Ed Overton
Mike Stankavich
Chris Lundquist
Michael Nikitochkin
Ali Rizvi-Santiago
Pieter Lazzaro
Valentin Tjoncke
Valentin Tjoncke
Yuki Takeichi
Jeremy Asher
Orivej Desh
Vasiliy Tolstov
Dan Peterson
Ingo Gottwald
Marc Siegfriedt
Krzysztof Wilczynski
Lamoni Finlayson
Israel Shirk
Jeremiah Roth
mahcsig
Dan Tran
Charlie Vieth