e53f4be005
Fix 'The AssociatePublicIpAddress parameter is only supported for VPC launches.'
2016-11-24 17:01:32 +01:00
73c5eac4f0
Handle commit author & message the same way
2016-11-24 13:33:42 +01:00
06bebb63d0
Add log
2016-11-24 13:07:01 +01:00
c925acf502
Introduce docker commit changes
2016-11-24 11:42:34 +01:00
8257c2dabd
Merge pull request #4172 from rickard-von-essen/default-ssh-user
...
ssh: Remove ssh_username default values
2016-11-17 22:40:09 +01:00
96e9a8e6e9
Removed default value for ssh_username
2016-11-17 22:30:34 +01:00
68ca7490bb
Removed default value for ssh_username
2016-11-17 21:15:28 +01:00
285ff6940e
Revert some changes made in #4149 ( #4175 )
...
After some more research and testing it turns out we can support the use case where you want to reuse an associated IP address that already has port 22 or 5985 forwarded, by using a random public port.
The correct port to open in the firewall is different for the type of firewall used. The standard firewall requires the public port to be opened and the network ACL requires the private port to be opened.
So by partially reverting this code and updating which ports to open in which cases, we can support all use cases again.
2016-11-16 10:30:32 +01:00
2e65867cba
Closes #3908 : Adds snapshot tag overrides
...
This commit adds the ability to configure unique tags on snapshots
that are separate from the tags defined on the AMI. Anything applied
to the AMI will also be applied to the snapshots, but `snapshot_tags`
will override and append tags to the tags already applied to the snapshots
2016-11-15 23:16:27 -05:00
5649940fab
Removed unecessary print messages
2016-11-16 00:20:22 +01:00
484960c9d1
Fixes #4169
2016-11-16 00:17:30 +01:00
9a91ae4e8f
fix new session error when creating cred chain.
...
the old and deprecated method won't error and so is safe to use
even if we're not in amazon.
2016-11-14 11:39:22 -08:00
dc231f9600
PR remarks
2016-11-13 23:54:55 +01:00
4bcba37f38
Packer Builder 1&1
2016-11-13 23:34:36 +01:00
bcb319640e
builder/googlecompute: support source image family
...
Closes #4100
2016-11-13 16:54:04 +01:00
68c6835bb5
Do not create a random public port ( #4149 )
...
This is meant to be a gentle solution for a very specific use case, but is causing more issues then it solves.
If you have a port conflict when trying to use an already associated public IP, the easiest way around it is to let the builder associate a new temporary public IP address.
2016-11-10 13:59:58 +01:00
d1eadd91bb
Fix cloudstack builder ( #4139 )
...
* add zone id when associate ip address in cloudstack
* configure keypair
* fix bug firewall port
2016-11-10 13:21:08 +01:00
d81c06765d
fix go vet issue.
...
closes #4130
2016-11-07 10:17:53 -08:00
6088c1887c
Fix keycodes for ctrl,shift and alt key when sending over VNC
2016-11-04 19:26:14 +09:00
33f430bf25
Use the private port for the firewall rules ( #4114 )
...
Because of how CloudStack configures the firerwall on the router VM, you need to allow traffic to the private port instead of the public port.
2016-11-04 09:56:49 +01:00
5d0892bd37
Merge pull request #4101 from lwander/f-googlecompute-ssh-private-key-file
...
builder/googlecompute: Use ssh_private_key_file if provided
2016-11-03 11:04:02 -07:00
583e341ae7
builder/googlecompute: Store empty public_key
2016-11-03 12:49:09 -04:00
7f474d8f78
builder/googlecompute: Tests added
2016-11-03 12:45:52 -04:00
85210afe92
googlecompute: conditionally omit the wait for startup script step if no startup script is provided.
2016-11-02 15:20:21 -07:00
d70e783455
builder/googlecompute: Use ssh_private_key_file if provided
...
This seemed to be missing from the googlecompute provider. Now if the
ssh_private_key_file is provided, that will be used in place of a temporary
key. I didn't update the googlecompute specific docs under `./website/`, since
this parameter is already documented under the communicators templates page.
2016-11-02 17:04:34 -04:00
f3f5f89fe6
Merge pull request #4096 from mitchellh/filterday
...
builder/amazon-ebs: show ami id found from filter
2016-11-02 12:25:46 -07:00
60c459d6c8
Merge pull request #4098 from mitchellh/newsession
...
aws-sdk: use session.NewSession
2016-11-02 12:25:14 -07:00
9bc23ea512
Merge pull request #4099 from mitchellh/waitfail
...
Waitfail
2016-11-02 12:21:51 -07:00
36c09af992
builder/amazon: Add tests for the `ebs-volume` builder
...
These smoke tests are effectively a mirror of the EBS builder tests.
2016-11-02 12:56:39 -04:00
b1ff8c3bfc
builder/amazon: Add `ebs-volume` builder
...
This commit adds a builder that works like EBS builders, except does not
create an AMI, and instead is intended to create EBS volumes in an
initialized state. For example, the following template can be used to
create and export a set of 3 EBS Volumes in a ZFS zpool named `data` for
importing by instances running production systems:
```
{
"variables": {
"aws_access_key_id": "{{ env `AWS_ACCESS_KEY_ID` }}",
"aws_secret_access_key": "{{ env `AWS_SECRET_ACCESS_KEY` }}",
"region": "{{ env `AWS_REGION` }}",
"source_ami": "{{ env `PACKER_SOURCE_AMI` }}",
"vpc_id": "{{ env `PACKER_VPC_ID` }}",
"subnet_id": "{{ env `PACKER_SUBNET_ID` }}"
},
"builders": [{
"type": "amazon-ebs-volume",
"access_key": "{{ user `aws_access_key_id` }}",
"secret_key": "{{ user `aws_secret_access_key` }}",
"region": "{{user `region`}}",
"spot_price_auto_product": "Linux/UNIX (Amazon VPC)",
"ssh_pty": true,
"instance_type": "t2.medium",
"vpc_id": "{{user `vpc_id` }}",
"subnet_id": "{{user `subnet_id` }}",
"associate_public_ip_address": true,
"source_ami": "{{user `source_ami` }}",
"ssh_username": "ubuntu",
"ssh_timeout": "5m",
"ebs_volumes": [
{
"device_name": "/dev/xvdf",
"delete_on_termination": false,
"volume_size": 10,
"volume_type": "gp2",
"tags": {
"Name": "TeamCity-Data1",
"zpool": "data",
"Component": "TeamCity"
}
},
{
"device_name": "/dev/xvdg",
"delete_on_termination": false,
"volume_size": 10,
"volume_type": "gp2",
"tags": {
"Name": "TeamCity-Data2",
"zpool": "data",
"Component": "TeamCity"
}
},
{
"device_name": "/dev/xvdh",
"delete_on_termination": false,
"volume_size": 10,
"volume_type": "gp2",
"tags": {
"Name": "TeamCity-Data3",
"zpool": "data",
"Component": "TeamCity"
}
}
]
}],
"provisioners": [
{
"type": "shell",
"start_retry_timeout": "10m",
"inline": [
"DEBIAN_FRONTEND=noninteractive sudo apt-get update",
"DEBIAN_FRONTEND=noninteractive sudo apt-get install -y zfs",
"lsblk",
"sudo parted /dev/xvdf --script mklabel GPT",
"sudo parted /dev/xvdg --script mklabel GPT",
"sudo parted /dev/xvdh --script mklabel GPT",
"sudo zpool create -m none data raidz xvdf xvdg xvdh",
"sudo zpool status",
"sudo zpool export data",
"sudo zpool status"
]
}
]
}
```
StepModifyInstance and StepStopInstance are now shared between EBS and
EBS-Volume builders - move them into the AWS common directory and rename
them to indicate that they only apply to EBS-backed builders.
2016-11-02 12:56:39 -04:00
d47e47cf1f
rewrite to not use private aws package
2016-11-01 18:29:18 -07:00
c4c46c349e
implement security group waiter
2016-11-01 18:10:42 -07:00
970b37077e
Merge pull request #4050 from jen20/ssh-agent
...
builder/amazon: Allow use of local SSH Agent
2016-11-01 17:27:37 -07:00
48bdae93d1
aws-sdk: use session.NewSession
2016-11-01 15:53:04 -07:00
83b57b98ac
show ami id found from filter
2016-11-01 15:26:43 -07:00
d920b3fbf4
run gofmt
2016-11-01 14:08:04 -07:00
0dd7d7ff3b
fix error message
2016-10-31 16:44:18 -07:00
b9c6139d67
AWS async operations sometimes takes long times, if there are multiple parallel builds, polling at 2 second frequency will exceed the request limit. Allow 2 seconds to be overwritten with AWS_POLL_DELAY_SECONDS
2016-10-31 16:44:18 -07:00
01be917450
Merge pull request #3660 from StackPointCloud/packer-builder-profitbricks
...
Packer Builder ProfitBricks
2016-10-31 15:45:24 -07:00
93f0436766
Merge pull request #3909 from svanharmelen/f-cloudstack-builder
...
Add a CloudStack builder
2016-10-31 13:34:20 -07:00
f69ee4634f
Merge pull request #4041 from mitchellh/vmwareshutdown
...
VIP: VMware shutdown fails
2016-10-31 11:37:00 -07:00
d66490ebfd
Properly cleanup AWS temporary key pairs
...
Closes #4057 - Amazon key pair no longer cleaned up at end of build
2016-10-27 23:06:13 +02:00
d16d5d9686
Merge pull request #3817 from ChrisLundquist/dynamic-source-ami
...
Dynamic source ami
2016-10-25 21:24:41 +02:00
adddc60a1d
Fix typo in encrypted ami step log message
2016-10-25 16:01:01 +01:00
395d88941c
amazon: Allow SSH Agent auth for existing key pair
...
This commit allows SSH Agent authentication to be used with an existing
key pair defined in AWS.
2016-10-23 22:26:14 -05:00
7425fef2c7
builder/amazon: Allow use of local SSH Agent
...
This commit adds an option to use the local SSH Agent to authenticate
connections to source instances started by the the EBS and Instance
Store builders.
This is of use when the source AMI _already_ has configuration for
authorized SSH keys - for example if one uses an SSH certificate
authority.
A further extension (not implemented in this commit) is to allow SSH
agent use with a pre-defined key pair, in order to allow keys with
passphrases to be used without giving the passphrase to Packer.
2016-10-23 21:43:47 -05:00
d6bed79429
wait for shutdown command to end so we get stderr/out
2016-10-22 10:33:27 -07:00
da7d317e46
googlecompute: Run instance with custom scopes
2016-10-22 15:46:14 +09:00
e9a5d05a2f
builder/vmware: Ignore shutdown errors
...
Resolves issue where `shutdown_command` would error because the remote
side disconnected, which we should have expected and ignored.
2016-10-21 22:41:45 -07:00
f9f47c5bbb
fix shell disconnect error when shutting down vmware
2016-10-21 22:26:34 -07:00
48d94342ba
Add us-east-2 (Ohio) AWS region
2016-10-17 21:31:41 -05:00
4a00ffeea2
Closes #3999 - Support VirtualBox Trim/Discard
...
Adds a couple options to enable/disable the `--nonrotational` and
`--discard` flags during `VBoxManage storageattach` command execution
2016-10-17 08:52:28 -04:00
dbf3bf56d4
Add a CloudStack Builder
2016-10-16 15:29:18 +02:00
c273bd6beb
Merge pull request #3789 from jeremy-asher/amazon-ebs-delete-volumes-on-failure
...
clean up EBS volumes on failure
2016-10-15 14:57:15 +02:00
f908e18483
Merge pull request #3996 from boumenot/pr-issue-3968
...
azure: Allow user to set custom data
2016-10-13 13:39:54 -07:00
7d07fa7afc
azure: Allow user to set custom data
2016-10-13 11:56:23 -07:00
bba643df9a
azure: handle os_type errors more gracefully
2016-10-13 09:26:29 -07:00
249a943a1e
azure: Allow user to override size of OS disk
2016-10-12 16:24:04 -07:00
5da380baed
Error handling
...
Minor typo fixes
2016-10-13 00:41:04 +02:00
3c8dabba9e
Fixed formatting
2016-10-11 23:43:50 +02:00
dca286bf38
Merge remote-tracking branch 'upstream/master' into packer-builder-profitbricks
2016-10-10 23:53:52 +02:00
ba8cfbd222
builder/openstack: Support using SSH password.
...
This adds support for using ssh_password to connect to a OpenStack
instance. If ssh_password is defined creation of the temporary keypair
is skipped.
2016-10-08 23:18:19 +02:00
5e96709ee9
Merge pull request #2919 from arizvisa/floppy-recurse
...
Added an option for copying entire subdirectories via floppy_dirs (supplants floppy_files)
2016-10-08 16:51:16 +02:00
badadec140
Merge pull request #3758 from elconas/fix_vmware_builder
...
Fix License check to work with licensed VMware Workstation
2016-10-07 17:51:32 -07:00
b7e14c4354
Merge pull request #3952 from MikeStankavich/f-virtualbox-post-shutdown-delay
...
Add VirtualBox post shutdown delay to address floppy controller delet…
2016-10-03 16:23:02 -07:00
127142215a
Merge pull request #3954 from emo3/f-keepreq-vb
...
added functionality like vm
2016-10-03 12:55:34 -07:00
1adb0a5fc3
added functionality like vm
2016-10-03 15:11:21 -04:00
0be3034e82
Merge pull request #3953 from rickard-von-essen/amz-ssh
...
builder/amazon: Allow using ssh_private_key_file and ssh_password
2016-10-03 10:22:15 +02:00
acc2689b49
builder/amazon: Allow using ssh_private_key_file and ssh_password
...
This adds support for using amazon-ebs/amazon-instance builder without
a keypair. If a ssh_private_key_file is supplied without a
ssh_keypair_name no temporary ssh keypair is created. If ssh_password is
used no temporary ssh keypair is created and the password is used when
trying to connect.
Closes #2301
Closes #3156
2016-10-02 22:20:36 +02:00
a187b1cf92
Add VirtualBox post shutdown delay to address floppy controller delete error per issue #2401
2016-10-02 13:12:40 -05:00
cffc8e892c
Merge pull request #3382 from ahamidi/encrypted-boot-volume
...
Create AMI with encrypted boot volume
2016-10-02 01:02:43 +02:00
9379cbc5d9
[dynamic-source-ami] support instance builder too
2016-10-01 23:01:01 +00:00
ab3500b45c
[dynamic-source-ami] support chroot builder
2016-10-01 22:56:09 +00:00
1b4895c684
Merge remote-tracking branch 'origin/master' into dynamic-source-ami
2016-10-01 22:20:17 +00:00
3ad7f067ab
Merge pull request #2784 from orivej/fix-ssh-port-max
...
Make ssh_host_port_max an inclusive bound to agree with documentation
2016-10-02 00:12:37 +02:00
29ae078326
Added missing virtualbox floppy_dirs
2016-10-01 09:05:10 +02:00
924c0bc461
Merge pull request #3932 from pieter-lazzaro/googlecompute-createpassword
...
GCE Windows instance password creation
2016-09-30 22:01:56 +02:00
c0a4067151
builder/googlecompute: Print out WinRM password in debug mode.
2016-09-30 21:17:38 +02:00
a8e57d83d2
gofmt project.
...
noticed many unrelated changes being added to patches because of gofmt.
ran `find . -not -path "./vendor/*" -name "*.go" -exec gofmt -w {} \;`
2016-09-29 14:13:06 -07:00
a9abe43325
builder/amazon: add retry login when creating tags.
...
also move Retry from builder/googlecompute/common to common/retry
2016-09-28 18:22:31 -07:00
bfb075e505
Renamed artefact -> artifact
2016-09-29 00:04:14 +02:00
a092701aea
Renamed artefact -> artifact
2016-09-28 23:57:37 +02:00
3dc7873b21
Merge pull request #3936 from boumenot/pr-azure-error-message
...
azure: fix error message
2016-09-28 14:17:33 -07:00
e42b3d8447
azure: fix error message
...
There have been two issues raised where the user followed the error
message, but they needed to add yet another config value to disambiguate
the VNET. It would be better if the message over corrected, and asked the
user to specify everything to ensure complete disambiguation.
2016-09-28 09:50:10 -07:00
343c594bb3
Added UserDataFile support for DigitalOcean builder config.
2016-09-28 15:00:57 +02:00
86c00490e9
Renamed any and all instances of the word "FloppyContents" to "FloppyDirectories".
...
Ensure that all builders include FloppyDirectories in the StepCreateFloppy options.
Changed the way the unit-tests in common/step_create_floppy_test work to use the static test-fixtures directory instead of creating the paths dynamically.
Removed a duplicate line of documentation from parallels-pvm.html.md that occurred during rebasing.
2016-09-27 23:31:42 -05:00
5db1c1f503
Create a password for windows instances when using WinRM communicator and no password is provided.
2016-09-27 18:42:34 -04:00
ef1517064c
googlecompute/builder: Always show message when checking image exists
2016-09-24 21:12:25 +02:00
4605f9559f
Fix unreachable code
2016-09-23 20:38:28 +02:00
6f545af7f7
builder/googlecompute: -force
2016-09-23 14:21:43 +02:00
c95aab5e0e
Merge pull request #3888 from yoctocloud/qemu
...
builder/qemu: specify disk format to avoid errors
2016-09-22 08:43:40 +02:00
06e3539ffa
Merge pull request #3767 from taliesins/ExtendScanCodes
...
Add support for ctrl, shift and alt keys and using them as key modifier.
2016-09-20 21:36:46 +02:00
9ce70bfce0
Merge pull request #3338 from yuki-takeichi/gce-nvme
2016-09-20 12:50:43 +02:00
04078c5c48
Enable to select NVMe images for googlecompute builder
2016-09-20 12:47:14 +02:00
13c9db5dd5
Merge pull request #3885 from orivej/on-error
...
Add -on-error command line argument to allow preserving artifacts on builder errors
2016-09-20 12:28:14 +02:00
476d981211
Merge pull request #3800 from benwtr/issue-3142-match-dotfiles-docker-communicator
...
Fix file provisioner dotfile matching w/ docker builder
2016-09-20 12:25:37 +02:00
7cbb98f2d5
QemuArggs -> QemuArgs
...
Avast ye, resolves #3901
2016-09-19 14:34:13 -07:00
aea05f6485
fix nil pointer dereference in amazon-chroot
...
The refactor of StepRegisterAmi to add the from_scratch parameter
incorrectly replaced iteration over image.BlockDeviceMappings with
iteration over the new mapping array when not using from_scratch. This
fixes the regression and renames the parameters to newMappings and
mappings for better clarity.
2016-09-16 18:35:36 -07:00
6762965696
Add -on-error command line argument to allow preserving artifacts on builder errors
...
Resolves #409
2016-09-16 12:15:00 +00:00
4986ef39b2
builder/qemu: specify disk format to avoid errors
...
Image format was not specified for XXX and probing
guessed raw.
Automatically detecting the format is dangerous for raw images, write
operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
2016-09-15 17:59:05 +03:00
ephemeralsnow
Florian Rey
Rickard von Essen
jasminSPC
Sander van Harmelen
Arthur Burkart
Matthew Hooker
Peter Schultz
nyankichi820
febc.yamamoto
Lars Wander
Scott Crunkleton
James Nugent
Ganesh kumar Sankaran
Richard Owen
YAMADA Tsuyoshi
Asif R Choudhury
Christopher Boumenot
Christopher Boumenot
Ed Overton
Mike Stankavich
Chris Lundquist
Michael Nikitochkin
Ali Rizvi-Santiago
Pieter Lazzaro
Valentin Tjoncke
Valentin Tjoncke
Yuki Takeichi
Jeremy Asher
Orivej Desh
Vasiliy Tolstov