--- description: | This VMware Packer builder is able to create VMware virtual machines from an existing VMware virtual machine (a VMX file). It currently supports building virtual machines on hosts running VMware Fusion Professional for OS X, VMware Workstation for Linux and Windows, and VMware Player on Linux. layout: docs page_title: VMware Builder from VMX ... # VMware Builder (from VMX) Type: `vmware-vmx` This VMware Packer builder is able to create VMware virtual machines from an existing VMware virtual machine (a VMX file). It currently supports building virtual machines on hosts running [VMware Fusion Professional](https://www.vmware.com/products/fusion-professional/) for OS X, [VMware Workstation](https://www.vmware.com/products/workstation/overview.html) for Linux and Windows, and [VMware Player](https://www.vmware.com/products/player/) on Linux. The builder builds a virtual machine by cloning the VMX file using the clone capabilities introduced in VMware Fusion Professional 6, Workstation 10, and Player 6. After cloning the VM, it provisions software within the new machine, shuts it down, and compacts the disks. The resulting folder contains a new VMware virtual machine. ## Basic Example Here is an example. This example is fully functional as long as the source path points to a real VMX file with the proper settings: ``` {.javascript} { "type": "vmware-vmx", "source_path": "/path/to/a/vm.vmx", "ssh_username": "root", "ssh_password": "root", "shutdown_command": "shutdown -P now" } ``` ## Configuration Reference There are many configuration options available for the VMware builder. They are organized below into two categories: required and optional. Within each category, the available options are alphabetized and described. In addition to the options listed here, a [communicator](/docs/templates/communicator.html) can be configured for this builder. ### Required: - `source_path` (string) - Path to the source VMX file to clone. - `ssh_username` (string) - The username to use to SSH into the machine once the OS is installed. ### Optional: - `boot_command` (array of strings) - This is an array of commands to type when the virtual machine is first booted. The goal of these commands should be to type just enough to initialize the operating system installer. Special keys can be typed as well, and are covered in the section below on the boot command. If this is not specified, it is assumed the installer will start itself. - `boot_wait` (string) - The time to wait after booting the initial virtual machine before typing the `boot_command`. The value of this should be a duration. Examples are "5s" and "1m30s" which will cause Packer to wait five seconds and one minute 30 seconds, respectively. If this isn't specified, the default is 10 seconds. - `floppy_files` (array of strings) - A list of files to place onto a floppy disk that is attached when the VM is booted. This is most useful for unattended Windows installs, which look for an `Autounattend.xml` file on removable media. By default, no floppy will be attached. All files listed in this setting get placed into the root directory of the floppy and the floppy is attached as the first floppy device. Currently, no support exists for creating sub-directories on the floppy. Wildcard characters (\*, ?, and \[\]) are allowed. Directory names are also allowed, which will add all the files found in the directory to the floppy. - `floppy_dirs` (array of strings) - A list of directories to place onto the floppy disk recursively. This is similar to the `floppy_files` option except that the directory structure is preserved. This is useful for when your floppy disk includes drivers or if you just want to organize it's contents as a hierarchy. Wildcard characters (\*, ?, and \[\]) are allowed. - `fusion_app_path` (string) - Path to "VMware Fusion.app". By default this is "/Applications/VMware Fusion.app" but this setting allows you to customize this. - `headless` (boolean) - Packer defaults to building VMware virtual machines by launching a GUI that shows the console of the machine being built. When this value is set to true, the machine will start without a console. For VMware machines, Packer will output VNC connection information in case you need to connect to the console to debug the build process. - `http_directory` (string) - Path to a directory to serve using an HTTP server. The files in this directory will be available over HTTP that will be requestable from the virtual machine. This is useful for hosting kickstart files and so on. By default this is "", which means no HTTP server will be started. The address and port of the HTTP server will be available as variables in `boot_command`. This is covered in more detail below. - `http_port_min` and `http_port_max` (integer) - These are the minimum and maximum port to use for the HTTP server started to serve the `http_directory`. Because Packer often runs in parallel, Packer will choose a randomly available port in this range to run the HTTP server. If you want to force the HTTP server to be on one port, make this minimum and maximum port the same. By default the values are 8000 and 9000, respectively. - `output_directory` (string) - This is the path to the directory where the resulting virtual machine will be created. This may be relative or absolute. If relative, the path is relative to the working directory when `packer` is executed. This directory must not exist or be empty prior to running the builder. By default this is "output-BUILDNAME" where "BUILDNAME" is the name of the build. - `shutdown_command` (string) - The command to use to gracefully shut down the machine once all the provisioning is done. By default this is an empty string, which tells Packer to just forcefully shut down the machine unless a shutdown command takes place inside script so this may safely be omitted. If one or more scripts require a reboot it is suggested to leave this blank since reboots may fail and specify the final shutdown command in your last script. - `shutdown_timeout` (string) - The amount of time to wait after executing the `shutdown_command` for the virtual machine to actually shut down. If it doesn't shut down in this time, it is an error. By default, the timeout is "5m", or five minutes. - `skip_compaction` (boolean) - VMware-created disks are defragmented and compacted at the end of the build process using `vmware-vdiskmanager`. In certain rare cases, this might actually end up making the resulting disks slightly larger. If you find this to be the case, you can disable compaction using this configuration value. - `tools_upload_flavor` (string) - The flavor of the VMware Tools ISO to upload into the VM. Valid values are "darwin", "linux", and "windows". By default, this is empty, which means VMware tools won't be uploaded. - `tools_upload_path` (string) - The path in the VM to upload the VMware tools. This only takes effect if `tools_upload_flavor` is non-empty. This is a [configuration template](/docs/templates/configuration-templates.html) that has a single valid variable: `Flavor`, which will be the value of `tools_upload_flavor`. By default the upload path is set to `{{.Flavor}}.iso`. - `vm_name` (string) - This is the name of the VMX file for the new virtual machine, without the file extension. By default this is "packer-BUILDNAME", where "BUILDNAME" is the name of the build. - `vmx_data` (object of key/value strings) - Arbitrary key/values to enter into the virtual machine VMX file. This is for advanced users who want to set properties such as memory, CPU, etc. - `vmx_data_post` (object of key/value strings) - Identical to `vmx_data`, except that it is run after the virtual machine is shutdown, and before the virtual machine is exported. - `vnc_bind_address` (string / IP address) - The IP address that should be binded to for VNC. By default packer will use 127.0.0.1 for this. - `vnc_disable_password` (boolean) - Don't auto-generate a VNC password that is used to secure the VNC communication with the VM. - `vnc_port_min` and `vnc_port_max` (integer) - The minimum and maximum port to use for VNC access to the virtual machine. The builder uses VNC to type the initial `boot_command`. Because Packer generally runs in parallel, Packer uses a randomly chosen port in this range that appears available. By default this is 5900 to 6000. The minimum and maximum ports are inclusive. ## Boot Command The `boot_command` configuration is very important: it specifies the keys to type when the virtual machine is first booted in order to start the OS installer. This command is typed after `boot_wait`. As documented above, the `boot_command` is an array of strings. The strings are all typed in sequence. It is an array only to improve readability within the template. The boot command is "typed" character for character over a VNC connection to the machine, simulating a human actually typing the keyboard. There are a set of special keys available. If these are in your boot command, they will be replaced by the proper key: - `` - Backspace - `` - Delete - `` and `` - Simulates an actual "enter" or "return" keypress. - `` - Simulates pressing the escape key. - `` - Simulates pressing the tab key. - `` - `` - Simulates pressing a function key. - `` `` `` `` - Simulates pressing an arrow key. - `` - Simulates pressing the spacebar. - `` - Simulates pressing the insert key. - `` `` - Simulates pressing the home and end keys. - `` `` - Simulates pressing the page up and page down keys. - `` `` - Simulates pressing the alt key. - `` `` - Simulates pressing the ctrl key. - `` `` - Simulates pressing the shift key. - `` `` - Simulates pressing and holding the alt key. - `` `` - Simulates pressing and holding the ctrl key. - `` `` - Simulates pressing and holding the shift key. - `` `` - Simulates releasing a held alt key. - `` `` - Simulates releasing a held ctrl key. - `` `` - Simulates releasing a held shift key. - `` `` `` - Adds a 1, 5 or 10 second pause before sending any additional keys. This is useful if you have to generally wait for the UI to update before typing more. In addition to the special keys, each command to type is treated as a [configuration template](/docs/templates/configuration-templates.html). The available variables are: - `HTTPIP` and `HTTPPort` - The IP and port, respectively of an HTTP server that is started serving the directory specified by the `http_directory` configuration parameter. If `http_directory` isn't specified, these will be blank! Example boot command. This is actually a working boot command used to start an Ubuntu 12.04 installer: ``` {.text} [ "", "/install/vmlinuz noapic ", "preseed/url=http://{{ .HTTPIP }}:{{ .HTTPPort }}/preseed.cfg ", "debian-installer=en_US auto locale=en_US kbd-chooser/method=us ", "hostname={{ .Name }} ", "fb=false debconf/frontend=noninteractive ", "keyboard-configuration/modelcode=SKIP keyboard-configuration/layout=USA ", "keyboard-configuration/variant=USA console-setup/ask_detect=false ", "initrd=/install/initrd.gz -- " ] ```