iSharkFly-Docs
/
packer-cn
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
packer-cn/website/pages/partials/builder/qemu/Config-not-required.mdx

308 lines
14 KiB
Plaintext
Raw Blame History

<!-- Code generated from the comments of the Config struct in builder/qemu/config.go; DO NOT EDIT MANUALLY -->
- `iso_skip_cache` (bool) - Use iso from provided url. Qemu must support
curl block device. This defaults to `false`.
- `accelerator` (string) - The accelerator type to use when running the VM.
This may be `none`, `kvm`, `tcg`, `hax`, `hvf`, `whpx`, or `xen`. The appropriate
software must have already been installed on your build machine to use the
accelerator you specified. When no accelerator is specified, Packer will try
to use `kvm` if it is available but will default to `tcg` otherwise.
~> The `hax` accelerator has issues attaching CDROM ISOs. This is an
upstream issue which can be tracked
[here](https://github.com/intel/haxm/issues/20).
~> The `hvf` and `whpx` accelerator are new and experimental as of
[QEMU 2.12.0](https://wiki.qemu.org/ChangeLog/2.12#Host_support).
You may encounter issues unrelated to Packer when using these. You may need to
add [ "-global", "virtio-pci.disable-modern=on" ] to `qemuargs` depending on the
guest operating system.
~> For `whpx`, note that [Stefan Weil's QEMU for Windows distribution](https://qemu.weilnetz.de/w64/)
does not include WHPX support and users may need to compile or source a
build of QEMU for Windows themselves with WHPX support.
- `disk_additional_size` ([]string) - Additional disks to create. Uses `vm_name` as the disk name template and
appends `-#` where `#` is the position in the array. `#` starts at 1 since 0
is the default disk. Each string represents the disk image size in bytes.
Optional suffixes 'k' or 'K' (kilobyte, 1024), 'M' (megabyte, 1024k), 'G'
(gigabyte, 1024M), 'T' (terabyte, 1024G), 'P' (petabyte, 1024T) and 'E'
(exabyte, 1024P) are supported. 'b' is ignored. Per qemu-img documentation.
Each additional disk uses the same disk parameters as the default disk.
Unset by default.
- `cpus` (int) - The number of cpus to use when building the VM.
The default is `1` CPU.
- `disk_interface` (string) - The interface to use for the disk. Allowed values include any of `ide`,
`scsi`, `virtio` or `virtio-scsi`^\*. Note also that any boot commands
or kickstart type scripts must have proper adjustments for resulting
device names. The Qemu builder uses `virtio` by default.
^\* Please be aware that use of the `scsi` disk interface has been
disabled by Red Hat due to a bug described
[here](https://bugzilla.redhat.com/show_bug.cgi?id=1019220). If you are
running Qemu on RHEL or a RHEL variant such as CentOS, you *must* choose
one of the other listed interfaces. Using the `scsi` interface under
these circumstances will cause the build to fail.
- `disk_size` (string) - The size in bytes of the hard disk of the VM. Suffix with the first
letter of common byte types. Use "k" or "K" for kilobytes, "M" for
megabytes, G for gigabytes, and T for terabytes. If no value is provided
for disk_size, Packer uses a default of `40960M` (40 GB). If a disk_size
number is provided with no units, Packer will default to Megabytes.
- `skip_resize_disk` (bool) - Packer resizes the QCOW2 image using
qemu-img resize. Set this option to true to disable resizing.
Defaults to false.
- `disk_cache` (string) - The cache mode to use for disk. Allowed values include any of
`writethrough`, `writeback`, `none`, `unsafe` or `directsync`. By
default, this is set to `writeback`.
- `disk_discard` (string) - The discard mode to use for disk. Allowed values
include any of unmap or ignore. By default, this is set to ignore.
- `disk_detect_zeroes` (string) - The detect-zeroes mode to use for disk.
Allowed values include any of unmap, on or off. Defaults to off.
When the value is "off" we don't set the flag in the qemu command, so that
Packer still works with old versions of QEMU that don't have this option.
- `skip_compaction` (bool) - Packer compacts the QCOW2 image using
qemu-img convert. Set this option to true to disable compacting.
Defaults to false.
- `disk_compression` (bool) - Apply compression to the QCOW2 disk file
using qemu-img convert. Defaults to false.
- `format` (string) - Either `qcow2` or `raw`, this specifies the output format of the virtual
machine image. This defaults to `qcow2`. Due to a long-standing bug with
`qemu-img convert` on OSX, sometimes the qemu-img convert call will
create a corrupted image. If this is an issue for you, make sure that the
the output format matches the input file's format, and Packer will
perform a simple copy operation instead. See
https://bugs.launchpad.net/qemu/+bug/1776920 for more details.
- `headless` (bool) - Packer defaults to building QEMU virtual machines by
launching a GUI that shows the console of the machine being built. When this
value is set to `true`, the machine will start without a console.
You can still see the console if you make a note of the VNC display
number chosen, and then connect using `vncviewer -Shared <host>:<display>`
- `disk_image` (bool) - Packer defaults to building from an ISO file, this parameter controls
whether the ISO URL supplied is actually a bootable QEMU image. When
this value is set to `true`, the machine will either clone the source or
use it as a backing file (if `use_backing_file` is `true`); then, it
will resize the image according to `disk_size` and boot it.
- `use_backing_file` (bool) - Only applicable when disk_image is true
and format is qcow2, set this option to true to create a new QCOW2
file that uses the file located at iso_url as a backing file. The new file
will only contain blocks that have changed compared to the backing file, so
enabling this option can significantly reduce disk usage. If true, Packer
will force the `skip_compaction` also to be true as well to skip disk
conversion which would render the backing file feature useless.
- `machine_type` (string) - The type of machine emulation to use. Run your qemu binary with the
flags `-machine help` to list available types for your system. This
defaults to `pc`.
- `memory` (int) - The amount of memory to use when building the VM
in megabytes. This defaults to 512 megabytes.
- `net_device` (string) - The driver to use for the network interface. Allowed values `ne2k_pci`,
`i82551`, `i82557b`, `i82559er`, `rtl8139`, `e1000`, `pcnet`, `virtio`,
`virtio-net`, `virtio-net-pci`, `usb-net`, `i82559a`, `i82559b`,
`i82559c`, `i82550`, `i82562`, `i82557a`, `i82557c`, `i82801`,
`vmxnet3`, `i82558a` or `i82558b`. The Qemu builder uses `virtio-net` by
default.
- `net_bridge` (string) - Connects the network to this bridge instead of using the user mode
networking.
**NB** This bridge must already exist. You can use the `virbr0` bridge
as created by vagrant-libvirt.
**NB** This will automatically enable the QMP socket (see QMPEnable).
**NB** This only works in Linux based OSes.
- `output_directory` (string) - This is the path to the directory where the
resulting virtual machine will be created. This may be relative or absolute.
If relative, the path is relative to the working directory when packer
is executed. This directory must not exist or be empty prior to running
the builder. By default this is output-BUILDNAME where "BUILDNAME" is the
name of the build.
- `qemuargs` ([][]string) - Allows complete control over the qemu command line (though not, at this
time, qemu-img). Each array of strings makes up a command line switch
that overrides matching default switch/value pairs. Any value specified
as an empty string is ignored. All values after the switch are
concatenated with no separator.
~> **Warning:** The qemu command line allows extreme flexibility, so
beware of conflicting arguments causing failures of your run. For
instance, using --no-acpi could break the ability to send power signal
type commands (e.g., shutdown -P now) to the virtual machine, thus
preventing proper shutdown. To see the defaults, look in the packer.log
file and search for the qemu-system-x86 command. The arguments are all
printed for review.
The following shows a sample usage:
In JSON:
```json
"qemuargs": [
[ "-m", "1024M" ],
[ "--no-acpi", "" ],
[
"-netdev",
"user,id=mynet0,",
"hostfwd=hostip:hostport-guestip:guestport",
""
],
[ "-device", "virtio-net,netdev=mynet0" ]
]
```
In HCL2:
```hcl
qemuargs = [
[ "-m", "1024M" ],
[ "--no-acpi", "" ],
[
"-netdev",
"user,id=mynet0,",
"hostfwd=hostip:hostport-guestip:guestport",
""
],
[ "-device", "virtio-net,netdev=mynet0" ]
]
```
would produce the following (not including other defaults supplied by
the builder and not otherwise conflicting with the qemuargs):
```text
qemu-system-x86 -m 1024m --no-acpi -netdev
user,id=mynet0,hostfwd=hostip:hostport-guestip:guestport -device
virtio-net,netdev=mynet0"
```
~> **Windows Users:** [QEMU for Windows](https://qemu.weilnetz.de/)
builds are available though an environmental variable does need to be
set for QEMU for Windows to redirect stdout to the console instead of
stdout.txt.
The following shows the environment variable that needs to be set for
Windows QEMU support:
```text
setx SDL_STDIO_REDIRECT=0
```
You can also use the `SSHHostPort` template variable to produce a packer
template that can be invoked by `make` in parallel:
In JSON:
```json
"qemuargs": [
[ "-netdev", "user,hostfwd=tcp::{{ .SSHHostPort }}-:22,id=forward"],
[ "-device", "virtio-net,netdev=forward,id=net0"]
]
```
In HCL2:
```hcl
qemuargs = [
[ "-netdev", "user,hostfwd=tcp::{{ .SSHHostPort }}-:22,id=forward"],
[ "-device", "virtio-net,netdev=forward,id=net0"]
]
`make -j 3 my-awesome-packer-templates` spawns 3 packer processes, each
of which will bind to their own SSH port as determined by each process.
This will also work with WinRM, just change the port forward in
`qemuargs` to map to WinRM's default port of `5985` or whatever value
you have the service set to listen on.
This is a template engine and allows access to the following variables:
`{{ .HTTPIP }}`, `{{ .HTTPPort }}`, `{{ .HTTPDir }}`,
`{{ .OutputDir }}`, `{{ .Name }}`, and `{{ .SSHHostPort }}`
- `qemu_img_args` (QemuImgArgs) - A map of custom arguemnts to pass to qemu-img commands, where the key
is the subcommand, and the values are lists of strings for each flag.
Example:
In JSON:
```json
{
"qemu_img_args": {
"convert": ["-o", "preallocation=full"],
"resize": ["-foo", "bar"]
}
```
Please note
that unlike qemuargs, these commands are not split into switch-value
sub-arrays, because the basic elements in qemu-img calls are unlikely
to need an actual override.
The arguments will be constructed as follows:
- Convert:
Default is `qemu-img convert -O $format $sourcepath $targetpath`. Adding
arguments ["-foo", "bar"] to qemu_img_args will change this to
`qemu-img convert -foo bar -O $format $sourcepath $targetpath`
- Create:
Default is `create -f $format $targetpath $size`. Adding arguments
["-foo", "bar"] to qemu_img_args will change this to
"create -f qcow2 -foo bar target.qcow2 1234M"
- Resize:
Default is `qemu-img resize -f $format $sourcepath $size`. Adding
arguments ["-foo", "bar"] to qemu_img_args will change this to
`qemu-img resize -f $format -foo bar $sourcepath $size`
- `qemu_binary` (string) - The name of the Qemu binary to look for. This
defaults to qemu-system-x86_64, but may need to be changed for
some platforms. For example qemu-kvm, or qemu-system-i386 may be a
better choice for some systems.
- `qmp_enable` (bool) - Enable QMP socket. Location is specified by `qmp_socket_path`. Defaults
to false.
- `qmp_socket_path` (string) - QMP Socket Path when `qmp_enable` is true. Defaults to
`output_directory`/`vm_name`.monitor.
- `use_default_display` (bool) - If true, do not pass a -display option
to qemu, allowing it to choose the default. This may be needed when running
under macOS, and getting errors about sdl not being available.
- `display` (string) - What QEMU -display option to use. Defaults to gtk, use none to not pass the
-display option allowing QEMU to choose the default. This may be needed when
running under macOS, and getting errors about sdl not being available.
- `vnc_bind_address` (string) - The IP address that should be
binded to for VNC. By default packer will use 127.0.0.1 for this. If you
wish to bind to all interfaces use 0.0.0.0.
- `vnc_use_password` (bool) - Whether or not to set a password on the VNC server. This option
automatically enables the QMP socket. See `qmp_socket_path`. Defaults to
`false`.
- `vnc_port_min` (int) - The minimum and maximum port
to use for VNC access to the virtual machine. The builder uses VNC to type
the initial boot_command. Because Packer generally runs in parallel,
Packer uses a randomly chosen port in this range that appears available. By
default this is 5900 to 6000. The minimum and maximum ports are inclusive.
- `vnc_port_max` (int) - VNC Port Max
- `vm_name` (string) - This is the name of the image (QCOW2 or IMG) file for
the new virtual machine. By default this is packer-BUILDNAME, where
"BUILDNAME" is the name of the build. Currently, no file extension will be
used unless it is specified in this option.
- `cdrom_interface` (string) - The interface to use for the CDROM device which contains the ISO image.
Allowed values include any of `ide`, `scsi`, `virtio` or
`virtio-scsi`. The Qemu builder uses `virtio` by default.
Some ARM64 images require `virtio-scsi`.
Reference in New Issue View Git Blame Copy Permalink