iSharkFly-Open
/
M-Unit
mirror of https://github.com/joelivey/M-Unit.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
M-Unit/20170704_GT.M_INSTALL_1.5.0...

2206 lines
88 KiB
Plaintext
Raw Normal View History

Updated MASH*1.5*0 for M-Unit Updated version of the M-Unit functionality for MUMPS for submission to the Open Source Electronic Health Record Alliance for certification.
2017-07-10 13:17:43 -04:00
The following capture shows the installation of M-Unit (MASH*1.5*0) on a GT.M
system (version 6.2) running VistA. Following installation, the unit tests for
the package and coverage analysis were performed twice. In GT.M when a routine
is first run, any apparent problems are identified and listed as the routine is
running. These are the result of sections of code for Intersystems Cache being
present which is not attempted to be run in a GT.M system. The second capture
which does not include this excess material is presented here.
The commands used are:
D ^XUP - used to perform the installation
D ^%utt1 - this runs the unit tests showing periods for each passing test
D EN^%ut("%utt1",3) - runs unit tests with VERBOSITY set to 3, this
causes each test to be listed with its result and at level
3 it lists execution time for each test in fractional
milliseconds
D ^%uttcovr - runs detailed coverage analysis for the unit test routines
with level set to 3, which lists coverage by routine,
coverage by tag within routines, and within each routine lists
by tag lines that were NOT covered
The example showing unit tests with a specification of verbosity set to 3, which
normally shows execution times in fractions of a millisecond, shows only
milliseconds since this capture was run in version 6.2 of GTM which does not
support the fractional milliseconds. [Problems were encountered in attempting to
load VistA into the instance of GT.M with V6.3-000, the fractional milliseconds
is shown in the MASH*1.5*0 GT.M installation without VistA.]
Script started on Tue 04 Jul 2017 10:18:47 PM EDT
[softhat@softhat-VirtualBox jli]$ ls
MASH_1.5_0.KID
[softhat@softhat-VirtualBox jli]$ dos2unix MASH_1.5_0.KID
dos2unix: converting file MASH_1.5_0.KID to Unix format ...
[softhat@softhat-VirtualBox jli]$ mumps -dir
GTM>S DUZ=1 D Q^DI,^%ZIS
VA FILEMAN 22.2V2
Select OPTION:
DEVICE: HOME// TELNET
GTM>D ^XUP
Setting up programmer environment
This is a TEST account.
Terminal Type set to: C-VT220
Select OPTION NAME: EVE
1 EVE Systems Manager Menu
2 EVENT CAPTURE ECX ECS MAINTENANCE Event Capture
3 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE AUDIT Event Capture
(ECS) Extract Audit
4 EVENT CAPTURE DATA ENTRY ECENTER Event Capture Data Entry
5 EVENT CAPTURE EXTRACT ECXEC Event Capture Extract
Press <Enter> to see more, '^' to exit this list, OR
CHOOSE 1-5: 1 EVE Systems Manager Menu
WARNING -- TASK MANAGER DOESN'T SEEM TO BE RUNNING!!!!
Core Applications ...
Device Management ...
Menu Management ...
Programmer Options ...
Operations Management ...
Spool Management ...
Information Security Officer Menu ...
Taskman Management ...
User Management ...
Application Utilities ...
Capacity Planning ...
HL7 Main Menu ...
You have PENDING ALERTS
Enter "VA to jump to VIEW ALERTS option
Select Systems Manager Menu <TEST ACCOUNT> Option: PROGrammer Options
KIDS Kernel Installation & Distribution System ...
PG Programmer mode
Delete Unreferenced Options
Error Processing ...
Global Block Count
Routine Tools ...
You have PENDING ALERTS
Enter "VA to jump to VIEW ALERTS option
Select Programmer Options <TEST ACCOUNT> Option: KIDS Kernel Installation & Dis
tribution System
Edits and Distribution ...
Utilities ...
Installation ...
Patch Monitor Main Menu ...
You have PENDING ALERTS
Enter "VA to jump to VIEW ALERTS option
Select Kernel Installation & Distribution System <TEST ACCOUNT> Option: INSTalla
tion
1 Load a Distribution
2 Verify Checksums in Transport Global
3 Print Transport Global
4 Compare Transport Global to Current System
5 Backup a Transport Global
6 Install Package(s)
Restart Install of Package(s)
Unload a Distribution
You have PENDING ALERTS
Enter "VA to jump to VIEW ALERTS option
Select Installation <TEST ACCOUNT> Option: LOAd a Distribution
Enter a Host File: /home/softhat/jli/MASH_1.5_0.KID
KIDS Distribution saved on Jul 04, 2017@12:57:48
Comment: Updated version of M-Unit functionality
This Distribution contains Transport Globals for the following Package(s):
MASH*1.5*0
Distribution OK!
Want to Continue with Load? YES//
Loading Distribution...
MASH*1.5*0
Use INSTALL NAME: MASH*1.5*0 to install this Distribution.
1 Load a Distribution
2 Verify Checksums in Transport Global
3 Print Transport Global
4 Compare Transport Global to Current System
5 Backup a Transport Global
6 Install Package(s)
Restart Install of Package(s)
Unload a Distribution
You have PENDING ALERTS
Enter "VA to jump to VIEW ALERTS option
Select Installation <TEST ACCOUNT> Option: INSTall Package(s)
Select INSTALL NAME: MASH*1.5*0 Loaded from Distribution 7/4/17@22:23:2
5
=> Updated version of M-Unit functionality ;Created on Jul 04, 2017@12:5
This Distribution was loaded on Jul 04, 2017@22:23:25 with header of
Updated version of M-Unit functionality ;Created on Jul 04, 2017@12:57:48
It consisted of the following Install(s):
MASH*1.5*0
Checking Install for Package MASH*1.5*0
Install Questions for MASH*1.5*0
Incoming Files:
17.9001 M-UNIT TEST GROUP (including data)
Want KIDS to Rebuild Menu Trees Upon Completion of Install? NO//
Want KIDS to INHIBIT LOGONs during the install? NO//
Want to DISABLE Scheduled Options, Menu Options, and Protocols? NO//
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
DEVICE: HOME// TELNET
Install Started for MASH*1.5*0 :
Jul 04, 2017@22:24
Build Distribution Date: Jul 04, 2017
Installing Routines:
---------------------------- ADDED COMMENT --------------------------------
While they pass rapidly, a number of apparent errors may be listed, but
these are due to code for Cache systems which is not identified by the
GT.M system. This may be seen again, the first time that unit tests
are run, but on repeating them the apparent errors are not shown on
subsequent runs.
----------------------- END OF ADDED COMMENT ---------------------------
Running Pre-Install Routine: ^ZZUTPRE
Installing Data Dictionaries:
Jul 04, 2017@22:24:04
Installing Data:
Jul 04, 2017@22:24:04
Installing PACKAGE COMPONENTS:
Installing REMOTE PROCEDURE
Installing OPTION
Jul 04, 2017@22:24:05
Running Post-Install Routine: ^ZZUTPOST
Routine: ut Loaded, Saved as %ut
Routine: ut1 Loaded, Saved as %ut1
Routine: utcover Loaded, Saved as %utcover
Routine: utt1 Loaded, Saved as %utt1
Routine: utt2 Loaded, Saved as %utt2
Routine: utt3 Loaded, Saved as %utt3
Routine: utt4 Loaded, Saved as %utt4
Routine: utt5 Loaded, Saved as %utt5
Routine: utt6 Loaded, Saved as %utt6
Routine: utt7 Loaded, Saved as %utt7
Routine: uttcovr Loaded, Saved as %uttcovr
Updating Routine file...
Updating KIDS files...
MASH*1.5*0 Installed.
Jul 04, 2017@22:24:05
NO Install Message sent
Install Completed
1 Load a Distribution
2 Verify Checksums in Transport Global
3 Print Transport Global
4 Compare Transport Global to Current System
5 Backup a Transport Global
6 Install Package(s)
Restart Install of Package(s)
Unload a Distribution
Select Installation <TEST ACCOUNT> Option: ^PG Programmer mode
%GTM-I-BREAK, Break instruction encountered
At M source location PRGMODE+6^%ZOSV
GTM>D ^%utt1
Running tests in NON-VERBOSE mode
For Verbose mode use DO VERBOSE^%utt1(ARG) where ARG is an integer 1 to 3
ENTER RETURN TO CONTINUE: ....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
......%utt3 ...........
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 6 Routines, 37 Entry Tags
Checked 109 tests, with 7 failures and encountered 1 error.
GTM>
GTM>
GTM>
GTM>
GTM>
GTM>d EN^%ut("%utt1",3)
----------------------------------- %utt1 -----------------------------------
T1 - - Make sure Start-up Ran.-------------------------------- [OK] 0.000ms
T2 - - Make sure Set-up runs.--------------------------------- [OK] 0.000ms
T3 - - Make sure Teardown runs.------------------------------- [OK] 0.000ms
T4 - Entry point using XTMENT.-------------------------------- [OK] 0.000ms
T5 - Error count check
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
.------------------------------------------------------------- [FAIL] 0.000m
s
T6 - Succeed Entry Point...----------------------------------- [OK] 0.000ms
T7 - Make sure we write to principal even though we are on another device..
------------------------------------------------------------- [OK] 0.000ms
T8 - If IO starts with another device, write to that device as if it's the prici
pal device.--------------------------------------------------- [OK] 0.000ms
COVRPTGL - coverage report returning global....--------------- [OK] 0.000ms
----------------------------------- %utt2 -----------------------------------
T11 - An @TEST Entry point in Another Routine invoked through XTROU offsets.
------------------------------------------------------------- [OK] 0.000ms
T12 - An XTENT offset entry point in Another Routine invoked through XTROU offse
ts.----------------------------------------------------------- [OK] 0.000ms
----------------------------------- %utt4 -----------------------------------
MAIN - - Test coverage calculations--------------------------- [OK] 0.000ms
----------------------------------- %utt5 -----------------------------------
NEWSTYLE - identify new style test indicator functionality.--- [OK] 0.000ms
OLDSTYLE - identify old style test indicator functionality..- [OK] 0.000ms
OLDSTYL1 - identify old style test indicator 2.-------------- [OK] 0.000ms
BADCHKEQ - CHKEQ should fail on unequal value
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
-------------------------------------------------------------- [FAIL] 0.000m
s
BADCHKTF - CHKTF should fail on false value
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
-------------------------------------------------------------- [FAIL] 0.000m
s
BADERROR - throws an error on purpose
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
-------------------------------------------------------------- [FAIL] 0.000m
s
CALLFAIL - called FAIL to test it
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
-------------------------------------------------------------- [FAIL] 0.000m
s
LEAKSOK - check leaks should be ok---------------------------- [OK] 0.000ms
LEAKSBAD - check leaks with leak
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
-------------------------------------------------------------- [FAIL] 0.000m
s
NVLDARG1 - check invalid arg in CHKEQ
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
-------------------------------------------------------------- [FAIL] 0.000m
s
ISUTEST - check ISUTEST inside unit test.--------------------- [OK] 0.000ms
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude......
------------------------------------------------------------- [OK] 0.000ms
CHKCMDLN - check command line processing of %utt5------------- [OK] 0.000ms
CHKGUI - check GUI processing of %utt5------------------------ [OK] 0.000ms
CKGUISET - check list of tests returned by GUISET------------- [OK] 0.000ms
NEWSTYLE - test return of valid new style or @TEST indicators...[OK] 0.000ms
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...------------------------------- [OK] 0.000ms
COVCOV - - check COVCOV - remove seen lines......------------- [OK] 0.000ms
COVRPT...........--------------------------------------------- [OK] 10.000ms
COVRPTLS - - coverage report returning text in global...........[OK] 0.000ms
TRIMDATA - - TRIMDATA in %utcover..--------------------------- [OK] 0.000ms
LIST - - LIST in %utcover............------------------------- [OK] 0.000ms
CACHECOV - - set up routine for analysis in globals..--------- [OK] 20.000ms
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............---------------------------------------- [OK] 0.000ms
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........------------------ [OK] 0.000ms
Ran 6 Routines, 37 Entry Tags
Checked 109 tests, with 7 failures and encountered 1 error.
GTM>
GTM>
GTM>
GTM>
GTM>
GTM>d ^%uttcovr
Loading routines to test coverage...
%ut %ut1 %utcover %utf2hex
Routine %utf2hex removed from analysis, since it doesn't have the standard secon
d line format
%utt1 %utt2 %utt3 %utt4 %utt5 %utt6 %utt7 %uttcovr
------------------- RUNNING %utt1 -------------------
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
.................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 6 Routines, 37 Entry Tags
Checked 109 tests, with 7 failures and encountered 1 error.
Coventry ROU=%utt1
------------------- RUNNING %uttcovr -------------------
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
Coventry ROU=%uttcovr
------------------- RUNNING ENTRY^%uttcovr -------------------
LEAKSBAD TEST - X NOT SPECIFIED VARIABLE LEAK: X
xxxxxxxxxxxxxxxxxxxx GOING TO COV^%ut FOR %utt5 at 3
Loading routines to test coverage...
%ut1 ....
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
.
Ran 1 Routine, 11 Entry Tags
Checked 10 tests, with 5 failures and encountered 1 error.
xxxxxxxxxxxxxxxxxxxx GOING TO COV^%ut FOR %utt5 at -1
Loading routines to test coverage...
%ut1 ....
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
.
Ran 1 Routine, 11 Entry Tags
Checked 10 tests, with 5 failures and encountered 1 error.
xxxxxxxxxxxxxxxxxxxx GOING TO MULTAPIS for %utt4 and %ut
------------------- RUNNING ^%ut -------------------
RUNNING COMMAND LINE TESTS VIA DOSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
Running command line tests by RUNSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
RUNNING COMMAND LINE UNIT TESTS FOR %utt5
....
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
.
Ran 1 Routine, 11 Entry Tags
Checked 10 tests, with 5 failures and encountered 1 error.
RUNNING UNIT TESTS FOR %utt5 VIA GUI CALLS - Silent
NOW RUNNING UNIT TESTS FOR %uttcovr
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
.........
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
Coventry ROU=^%ut
------------------- RUNNING ^%utt4 -------------------
----------------------------------- %utt4 -----------------------------------
MAIN - - Test coverage calculations------------------------------------ [OK]
Ran 1 Routine, 1 Entry Tag
Checked 0 test, with 0 failures and encountered 0 errors.
Coventry ROU=^%utt4
------------ SUMMARY ------------
Ran 2 Routines, 6 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
xxxxxxxxxxxxxxxxxxxx GOING TO COVERAGE for %utt4 and %ut at 3
Loading routines to test coverage...
%ut %ut1 %utcover %utf2hex
Routine %utf2hex removed from analysis, since it doesn't have the standard secon
d line format
%utt1 %utt2 %utt3 %utt4 %utt5 %utt6 %utt7 %uttcovr
------------------- RUNNING ^%ut -------------------
RUNNING COMMAND LINE TESTS VIA DOSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
Running command line tests by RUNSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
RUNNING COMMAND LINE UNIT TESTS FOR %utt5
....
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
.
Ran 1 Routine, 11 Entry Tags
Checked 10 tests, with 5 failures and encountered 1 error.
RUNNING UNIT TESTS FOR %utt5 VIA GUI CALLS - Silent
NOW RUNNING UNIT TESTS FOR %uttcovr
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
.........
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
Coventry ROU=^%ut
------------------- RUNNING ^%utt4 -------------------
----------------------------------- %utt4 -----------------------------------
MAIN - - Test coverage calculations------------------------------------ [OK]
Ran 1 Routine, 1 Entry Tag
Checked 0 test, with 0 failures and encountered 0 errors.
Coventry ROU=^%utt4
------------ SUMMARY ------------
Ran 2 Routines, 6 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
Routine %utt3 (73.68%) 14 out of 19 lines covered
- Detailed Breakdown
Tag INTERNAL^%utt3 (40.00%) 2 out of 5 lines covered
the following is a list of the lines **NOT** covered
INTERNAL+3 S A=2 ; Dead code
INTERNAL+4 S Y=2 ; Dead code
INTERNAL+5 QUIT ; Dead code
Tag SETUP^%utt3 (100.00%) 1 out of 1 lines covered
Tag SHUTDOWN^%utt3 (100.00%) 1 out of 1 lines covered
Tag STARTUP^%utt3 (100.00%) 3 out of 3 lines covered
Tag T1^%utt3 (100.00%) 2 out of 2 lines covered
Tag T2^%utt3 (60.00%) 3 out of 5 lines covered
the following is a list of the lines **NOT** covered
T2+4 S X=1 ; Dead code
T2+5 QUIT ; Dead code
Tag TEARDOWN^%utt3 (100.00%) 2 out of 2 lines covered
Tag XTMUNITV^%utt3 ------ 0 out of 0 lines covered
Routine %utt3 (73.68%) 14 out of 19 lines covered
- Summary
Tag INTERNAL^%utt3 (40.00%) 2 out of 5 lines covered
Tag SETUP^%utt3 (100.00%) 1 out of 1 lines covered
Tag SHUTDOWN^%utt3 (100.00%) 1 out of 1 lines covered
Tag STARTUP^%utt3 (100.00%) 3 out of 3 lines covered
Tag T1^%utt3 (100.00%) 2 out of 2 lines covered
Tag T2^%utt3 (60.00%) 3 out of 5 lines covered
Tag TEARDOWN^%utt3 (100.00%) 2 out of 2 lines covered
Tag XTMUNITV^%utt3 ------ 0 out of 0 lines covered
Routine %utt3 (73.68%) 14 out of 19 lines covered
Overall Analysis 14 out of 19 lines covered (73% coverage)
xxxxxxxxxxxxxxxxxxxx LISTING DATA VIA LIST
Routine %utt3 (73.68%) 14 out of 19 lines covered
- Detailed Breakdown
Tag INTERNAL^%utt3 (40.00%) 2 out of 5 lines covered
the following is a list of the lines **NOT** covered
INTERNAL+3 S A=2 ; Dead code
INTERNAL+4 S Y=2 ; Dead code
INTERNAL+5 QUIT ; Dead code
Tag SETUP^%utt3 (100.00%) 1 out of 1 lines covered
Tag SHUTDOWN^%utt3 (100.00%) 1 out of 1 lines covered
Tag STARTUP^%utt3 (100.00%) 3 out of 3 lines covered
Tag T1^%utt3 (100.00%) 2 out of 2 lines covered
Tag T2^%utt3 (60.00%) 3 out of 5 lines covered
the following is a list of the lines **NOT** covered
T2+4 S X=1 ; Dead code
T2+5 QUIT ; Dead code
Tag TEARDOWN^%utt3 (100.00%) 2 out of 2 lines covered
Tag XTMUNITV^%utt3 ------ 0 out of 0 lines covered
Routine %utt3 (73.68%) 14 out of 19 lines covered
- Summary
Tag INTERNAL^%utt3 (40.00%) 2 out of 5 lines covered
Tag SETUP^%utt3 (100.00%) 1 out of 1 lines covered
Tag SHUTDOWN^%utt3 (100.00%) 1 out of 1 lines covered
Tag STARTUP^%utt3 (100.00%) 3 out of 3 lines covered
Tag T1^%utt3 (100.00%) 2 out of 2 lines covered
Tag T2^%utt3 (60.00%) 3 out of 5 lines covered
Tag TEARDOWN^%utt3 (100.00%) 2 out of 2 lines covered
Tag XTMUNITV^%utt3 ------ 0 out of 0 lines covered
Routine %utt3 (73.68%) 14 out of 19 lines covered
Overall Analysis 14 out of 19 lines covered (73% coverage)
xxxxxxxxxxxxxxxxxxxx Finished in ENTRY^%uttcovr
Coventry ROU=ENTRY^%uttcovr
------------------- RUNNING VERBOSE2^%utt6 -------------------
RUNNING COMMAND LINE TESTS VIA DOSET^%ut
----------------------------------- %utt1 -----------------------------------
T1 - - Make sure Start-up Ran.-------------------------------- [OK] 0.000ms
T2 - - Make sure Set-up runs.--------------------------------- [OK] 0.000ms
T3 - - Make sure Teardown runs.------------------------------- [OK] 0.000ms
T4 - Entry point using XTMENT.-------------------------------- [OK] 0.000ms
T5 - Error count check
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
.------------------------------------------------------------- [FAIL] 0.000m
s
T6 - Succeed Entry Point...----------------------------------- [OK] 0.000ms
T7 - Make sure we write to principal even though we are on another device..
------------------------------------------------------------- [OK] 0.000ms
T8 - If IO starts with another device, write to that device as if it's the prici
pal device.--------------------------------------------------- [OK] 0.000ms
COVRPTGL - coverage report returning global....--------------- [OK] 20.000ms
----------------------------------- %utt2 -----------------------------------
T11 - An @TEST Entry point in Another Routine invoked through XTROU offsets.
------------------------------------------------------------- [OK] 0.000ms
T12 - An XTENT offset entry point in Another Routine invoked through XTROU offse
ts.----------------------------------------------------------- [OK] 0.000ms
----------------------------------- %utt3 -----------------------------------
T1 - Test 1.-------------------------------------------------- [OK] 0.000ms
T2 - Test 2.-------------------------------------------------- [OK] 0.000ms
----------------------------------- %utt4 -----------------------------------
MAIN - - Test coverage calculations--------------------------- [OK] 0.000ms
----------------------------------- %utt5 -----------------------------------
NEWSTYLE - identify new style test indicator functionality.--- [OK] 0.000ms
OLDSTYLE - identify old style test indicator functionality..- [OK] 0.000ms
OLDSTYL1 - identify old style test indicator 2.-------------- [OK] 0.000ms
BADCHKEQ - CHKEQ should fail on unequal value
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
-------------------------------------------------------------- [FAIL] 0.000m
s
BADCHKTF - CHKTF should fail on false value
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
-------------------------------------------------------------- [FAIL] 0.000m
s
BADERROR - throws an error on purpose
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
-------------------------------------------------------------- [FAIL] 0.000m
s
CALLFAIL - called FAIL to test it
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
-------------------------------------------------------------- [FAIL] 0.000m
s
LEAKSOK - check leaks should be ok---------------------------- [OK] 0.000ms
LEAKSBAD - check leaks with leak
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
-------------------------------------------------------------- [FAIL] 0.000m
s
NVLDARG1 - check invalid arg in CHKEQ
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
-------------------------------------------------------------- [FAIL] 0.000m
s
ISUTEST - check ISUTEST inside unit test.--------------------- [OK] 0.000ms
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude......
------------------------------------------------------------- [OK] 0.000ms
CHKCMDLN - check command line processing of %utt5------------- [OK] 0.000ms
CHKGUI - check GUI processing of %utt5------------------------ [OK] 0.000ms
CKGUISET - check list of tests returned by GUISET------------- [OK] 0.000ms
NEWSTYLE - test return of valid new style or @TEST indicators...[OK] 0.000ms
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...------------------------------- [OK] 0.000ms
COVCOV - - check COVCOV - remove seen lines......------------- [OK] 0.000ms
COVRPT...........--------------------------------------------- [OK] 20.000ms
COVRPTLS - - coverage report returning text in global...........[OK] 10.000ms
TRIMDATA - - TRIMDATA in %utcover..--------------------------- [OK] 0.000ms
LIST - - LIST in %utcover............------------------------- [OK] 0.000ms
CACHECOV - - set up routine for analysis in globals..--------- [OK] 20.000ms
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............---------------------------------------- [OK] 0.000ms
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........------------------ [OK] 0.000ms
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
Running command line tests by RUNSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
RUNNING COMMAND LINE UNIT TESTS FOR %utt5
----------------------------------- %utt5 -----------------------------------
NEWSTYLE - identify new style test indicator functionality.--- [OK] 0.000ms
OLDSTYLE - identify old style test indicator functionality..- [OK] 0.000ms
OLDSTYL1 - identify old style test indicator 2.-------------- [OK] 0.000ms
BADCHKEQ - CHKEQ should fail on unequal value
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
-------------------------------------------------------------- [FAIL] 0.000m
s
BADCHKTF - CHKTF should fail on false value
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
-------------------------------------------------------------- [FAIL] 0.000m
s
BADERROR - throws an error on purpose
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
-------------------------------------------------------------- [FAIL] 0.000m
s
CALLFAIL - called FAIL to test it
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
-------------------------------------------------------------- [FAIL] 0.000m
s
LEAKSOK - check leaks should be ok---------------------------- [OK] 0.000ms
LEAKSBAD - check leaks with leak
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
-------------------------------------------------------------- [FAIL] 0.000m
s
NVLDARG1 - check invalid arg in CHKEQ
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
-------------------------------------------------------------- [FAIL] 0.000m
s
ISUTEST - check ISUTEST inside unit test.--------------------- [OK] 0.000ms
Ran 1 Routine, 11 Entry Tags
Checked 10 tests, with 5 failures and encountered 1 error.
RUNNING UNIT TESTS FOR %utt5 VIA GUI CALLS - Silent
NOW RUNNING UNIT TESTS FOR %uttcovr
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...------------------------------- [OK] 0.000ms
COVCOV - - check COVCOV - remove seen lines......------------- [OK] 10.000ms
COVRPT...........--------------------------------------------- [OK] 0.000ms
COVRPTLS - - coverage report returning text in global...........[OK] 10.000ms
TRIMDATA - - TRIMDATA in %utcover..--------------------------- [OK] 0.000ms
LIST - - LIST in %utcover............------------------------- [OK] 10.000ms
CACHECOV - - set up routine for analysis in globals..--------- [OK] 10.000ms
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............---------------------------------------- [OK] 10.000ms
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........------------------ [OK] 0.000ms
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude......
------------------------------------------------------------- [OK] 0.000ms
CHKCMDLN - check command line processing of %utt5------------- [OK] 0.000ms
CHKGUI - check GUI processing of %utt5------------------------ [OK] 0.000ms
CKGUISET - check list of tests returned by GUISET------------- [OK] 0.000ms
NEWSTYLE - test return of valid new style or @TEST indicators...[OK] 10.000ms
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
Coventry ROU=VERBOSE2^%utt6
------------------- RUNNING VERBOSE3^%utt6 -------------------
RUNNING COMMAND LINE TESTS VIA DOSET^%ut
----------------------------------- %utt1 -----------------------------------
T1 - - Make sure Start-up Ran.-------------------------------- [OK] 0.000ms
T2 - - Make sure Set-up runs.--------------------------------- [OK] 0.000ms
T3 - - Make sure Teardown runs.------------------------------- [OK] 0.000ms
T4 - Entry point using XTMENT.-------------------------------- [OK] 0.000ms
T5 - Error count check
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
.------------------------------------------------------------- [FAIL] 0.000m
s
T6 - Succeed Entry Point...----------------------------------- [OK] 0.000ms
T7 - Make sure we write to principal even though we are on another device..
------------------------------------------------------------- [OK] 10.000ms
T8 - If IO starts with another device, write to that device as if it's the prici
pal device.--------------------------------------------------- [OK] 0.000ms
COVRPTGL - coverage report returning global....--------------- [OK] 0.000ms
----------------------------------- %utt2 -----------------------------------
T11 - An @TEST Entry point in Another Routine invoked through XTROU offsets.
------------------------------------------------------------- [OK] 0.000ms
T12 - An XTENT offset entry point in Another Routine invoked through XTROU offse
ts.----------------------------------------------------------- [OK] 0.000ms
----------------------------------- %utt3 -----------------------------------
T1 - Test 1.-------------------------------------------------- [OK] 0.000ms
T2 - Test 2.-------------------------------------------------- [OK] 0.000ms
----------------------------------- %utt4 -----------------------------------
MAIN - - Test coverage calculations--------------------------- [OK] 0.000ms
----------------------------------- %utt5 -----------------------------------
NEWSTYLE - identify new style test indicator functionality.--- [OK] 0.000ms
OLDSTYLE - identify old style test indicator functionality..- [OK] 0.000ms
OLDSTYL1 - identify old style test indicator 2.-------------- [OK] 0.000ms
BADCHKEQ - CHKEQ should fail on unequal value
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
-------------------------------------------------------------- [FAIL] 0.000m
s
BADCHKTF - CHKTF should fail on false value
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
-------------------------------------------------------------- [FAIL] 0.000m
s
BADERROR - throws an error on purpose
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
-------------------------------------------------------------- [FAIL] 0.000m
s
CALLFAIL - called FAIL to test it
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
-------------------------------------------------------------- [FAIL] 0.000m
s
LEAKSOK - check leaks should be ok---------------------------- [OK] 0.000ms
LEAKSBAD - check leaks with leak
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
-------------------------------------------------------------- [FAIL] 0.000m
s
NVLDARG1 - check invalid arg in CHKEQ
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
-------------------------------------------------------------- [FAIL] 0.000m
s
ISUTEST - check ISUTEST inside unit test.--------------------- [OK] 0.000ms
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude......
------------------------------------------------------------- [OK] 0.000ms
CHKCMDLN - check command line processing of %utt5------------- [OK] 0.000ms
CHKGUI - check GUI processing of %utt5------------------------ [OK] 0.000ms
CKGUISET - check list of tests returned by GUISET------------- [OK] 0.000ms
NEWSTYLE - test return of valid new style or @TEST indicators...[OK] 10.000ms
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...------------------------------- [OK] 0.000ms
COVCOV - - check COVCOV - remove seen lines......------------- [OK] 0.000ms
COVRPT...........--------------------------------------------- [OK] 10.000ms
COVRPTLS - - coverage report returning text in global...........[OK] 10.000ms
TRIMDATA - - TRIMDATA in %utcover..--------------------------- [OK] 0.000ms
LIST - - LIST in %utcover............------------------------- [OK] 0.000ms
CACHECOV - - set up routine for analysis in globals..--------- [OK] 10.000ms
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............---------------------------------------- [OK] 10.000ms
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........------------------ [OK] 0.000ms
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
Running command line tests by RUNSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
RUNNING COMMAND LINE UNIT TESTS FOR %utt5
----------------------------------- %utt5 -----------------------------------
NEWSTYLE - identify new style test indicator functionality.--- [OK] 0.000ms
OLDSTYLE - identify old style test indicator functionality..- [OK] 0.000ms
OLDSTYL1 - identify old style test indicator 2.-------------- [OK] 0.000ms
BADCHKEQ - CHKEQ should fail on unequal value
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
-------------------------------------------------------------- [FAIL] 0.000m
s
BADCHKTF - CHKTF should fail on false value
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
-------------------------------------------------------------- [FAIL] 0.000m
s
BADERROR - throws an error on purpose
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
-------------------------------------------------------------- [FAIL] 0.000m
s
CALLFAIL - called FAIL to test it
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
-------------------------------------------------------------- [FAIL] 10.000m
s
LEAKSOK - check leaks should be ok---------------------------- [OK] 0.000ms
LEAKSBAD - check leaks with leak
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
-------------------------------------------------------------- [FAIL] 0.000m
s
NVLDARG1 - check invalid arg in CHKEQ
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
-------------------------------------------------------------- [FAIL] 0.000m
s
ISUTEST - check ISUTEST inside unit test.--------------------- [OK] 0.000ms
Ran 1 Routine, 11 Entry Tags
Checked 10 tests, with 5 failures and encountered 1 error.
RUNNING UNIT TESTS FOR %utt5 VIA GUI CALLS - Silent
NOW RUNNING UNIT TESTS FOR %uttcovr
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...------------------------------- [OK] 0.000ms
COVCOV - - check COVCOV - remove seen lines......------------- [OK] 0.000ms
COVRPT...........--------------------------------------------- [OK] 10.000ms
COVRPTLS - - coverage report returning text in global...........[OK] 10.000ms
TRIMDATA - - TRIMDATA in %utcover..--------------------------- [OK] 0.000ms
LIST - - LIST in %utcover............------------------------- [OK] 10.000ms
CACHECOV - - set up routine for analysis in globals..--------- [OK] 20.000ms
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............---------------------------------------- [OK] 0.000ms
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........------------------ [OK] 0.000ms
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude......
------------------------------------------------------------- [OK] 0.000ms
CHKCMDLN - check command line processing of %utt5------------- [OK] 0.000ms
CHKGUI - check GUI processing of %utt5------------------------ [OK] 0.000ms
CKGUISET - check list of tests returned by GUISET------------- [OK] 0.000ms
NEWSTYLE - test return of valid new style or @TEST indicators...[OK] 10.000ms
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
Coventry ROU=VERBOSE3^%utt6
------------------- RUNNING VERBOSE^%utt1(3) -------------------
Running tests in VERBOSE mode with fractional millisecond timing
----------------------------------- %utt1 -----------------------------------
T1 - - Make sure Start-up Ran.-------------------------------- [OK] 0.000ms
T2 - - Make sure Set-up runs.--------------------------------- [OK] 0.000ms
T3 - - Make sure Teardown runs.------------------------------- [OK] 0.000ms
T4 - Entry point using XTMENT.-------------------------------- [OK] 0.000ms
T5 - Error count check
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
.------------------------------------------------------------- [FAIL] 0.000m
s
T6 - Succeed Entry Point...----------------------------------- [OK] 0.000ms
T7 - Make sure we write to principal even though we are on another device..
------------------------------------------------------------- [OK] 0.000ms
T8 - If IO starts with another device, write to that device as if it's the prici
pal device.--------------------------------------------------- [OK] 10.000ms
COVRPTGL - coverage report returning global....--------------- [OK] 0.000ms
----------------------------------- %utt2 -----------------------------------
T11 - An @TEST Entry point in Another Routine invoked through XTROU offsets.
------------------------------------------------------------- [OK] 0.000ms
T12 - An XTENT offset entry point in Another Routine invoked through XTROU offse
ts.----------------------------------------------------------- [OK] 0.000ms
----------------------------------- %utt4 -----------------------------------
MAIN - - Test coverage calculations--------------------------- [OK] 0.000ms
----------------------------------- %utt5 -----------------------------------
NEWSTYLE - identify new style test indicator functionality.--- [OK] 10.000ms
OLDSTYLE - identify old style test indicator functionality..- [OK] 0.000ms
OLDSTYL1 - identify old style test indicator 2.-------------- [OK] 0.000ms
BADCHKEQ - CHKEQ should fail on unequal value
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
-------------------------------------------------------------- [FAIL] 0.000m
s
BADCHKTF - CHKTF should fail on false value
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
-------------------------------------------------------------- [FAIL] 0.000m
s
BADERROR - throws an error on purpose
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
-------------------------------------------------------------- [FAIL] 0.000m
s
CALLFAIL - called FAIL to test it
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
-------------------------------------------------------------- [FAIL] 0.000m
s
LEAKSOK - check leaks should be ok---------------------------- [OK] 0.000ms
LEAKSBAD - check leaks with leak
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
-------------------------------------------------------------- [FAIL] 0.000m
s
NVLDARG1 - check invalid arg in CHKEQ
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
-------------------------------------------------------------- [FAIL] 0.000m
s
ISUTEST - check ISUTEST inside unit test.--------------------- [OK] 0.000ms
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude......
------------------------------------------------------------- [OK] 0.000ms
CHKCMDLN - check command line processing of %utt5------------- [OK] 0.000ms
CHKGUI - check GUI processing of %utt5------------------------ [OK] 0.000ms
CKGUISET - check list of tests returned by GUISET------------- [OK] 0.000ms
NEWSTYLE - test return of valid new style or @TEST indicators...[OK] 10.000ms
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...------------------------------- [OK] 0.000ms
COVCOV - - check COVCOV - remove seen lines......------------- [OK] 0.000ms
COVRPT...........--------------------------------------------- [OK] 10.000ms
COVRPTLS - - coverage report returning text in global...........[OK] 10.000ms
TRIMDATA - - TRIMDATA in %utcover..--------------------------- [OK] 0.000ms
LIST - - LIST in %utcover............------------------------- [OK] 0.000ms
CACHECOV - - set up routine for analysis in globals..--------- [OK] 20.000ms
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............---------------------------------------- [OK] 0.000ms
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........------------------ [OK] 0.000ms
Ran 6 Routines, 37 Entry Tags
Checked 109 tests, with 7 failures and encountered 1 error.
Coventry ROU=VERBOSE^%utt1(3)
------------------- RUNNING VERBOSE^%utt6 -------------------
RUNNING COMMAND LINE TESTS VIA DOSET^%ut
----------------------------------- %utt1 -----------------------------------
T1 - - Make sure Start-up Ran.----------------------------------------- [OK]
T2 - - Make sure Set-up runs.------------------------------------------ [OK]
T3 - - Make sure Teardown runs.---------------------------------------- [OK]
T4 - Entry point using XTMENT.----------------------------------------- [OK]
T5 - Error count check
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
.---------------------------------------------------------------------- [FAIL]
T6 - Succeed Entry Point...-------------------------------------------- [OK]
T7 - Make sure we write to principal even though we are on another device..
---------------------------------------------------------------------- [OK]
T8 - If IO starts with another device, write to that device as if it's the prici
pal device.------------------------------------------------------------ [OK]
COVRPTGL - coverage report returning global....------------------------ [OK]
----------------------------------- %utt2 -----------------------------------
T11 - An @TEST Entry point in Another Routine invoked through XTROU offsets.
---------------------------------------------------------------------- [OK]
T12 - An XTENT offset entry point in Another Routine invoked through XTROU offse
ts.-------------------------------------------------------------------- [OK]
----------------------------------- %utt3 -----------------------------------
T1 - Test 1.----------------------------------------------------------- [OK]
T2 - Test 2.----------------------------------------------------------- [OK]
----------------------------------- %utt4 -----------------------------------
MAIN - - Test coverage calculations------------------------------------ [OK]
----------------------------------- %utt5 -----------------------------------
NEWSTYLE - identify new style test indicator functionality.------------ [OK]
OLDSTYLE - identify old style test indicator functionality..---------- [OK]
OLDSTYL1 - identify old style test indicator 2.----------------------- [OK]
BADCHKEQ - CHKEQ should fail on unequal value
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
----------------------------------------------------------------------- [FAIL]
BADCHKTF - CHKTF should fail on false value
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
----------------------------------------------------------------------- [FAIL]
BADERROR - throws an error on purpose
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
----------------------------------------------------------------------- [FAIL]
CALLFAIL - called FAIL to test it
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
----------------------------------------------------------------------- [FAIL]
LEAKSOK - check leaks should be ok------------------------------------- [OK]
LEAKSBAD - check leaks with leak
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
----------------------------------------------------------------------- [FAIL]
NVLDARG1 - check invalid arg in CHKEQ
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
----------------------------------------------------------------------- [FAIL]
ISUTEST - check ISUTEST inside unit test.------------------------------ [OK]
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude......--- [OK]
CHKCMDLN - check command line processing of %utt5---------------------- [OK]
CHKGUI - check GUI processing of %utt5--------------------------------- [OK]
CKGUISET - check list of tests returned by GUISET---------------------- [OK]
NEWSTYLE - test return of valid new style or @TEST indicators...------- [OK]
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...---------------------------------------- [OK]
COVCOV - - check COVCOV - remove seen lines......---------------------- [OK]
COVRPT...........------------------------------------------------------ [OK]
COVRPTLS - - coverage report returning text in global...........------- [OK]
TRIMDATA - - TRIMDATA in %utcover..------------------------------------ [OK]
LIST - - LIST in %utcover............---------------------------------- [OK]
CACHECOV - - set up routine for analysis in globals..------------------ [OK]
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............------------------------------------------------- [OK]
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........--------------------------- [OK]
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
Running command line tests by RUNSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
RUNNING COMMAND LINE UNIT TESTS FOR %utt5
----------------------------------- %utt5 -----------------------------------
NEWSTYLE - identify new style test indicator functionality.------------ [OK]
OLDSTYLE - identify old style test indicator functionality..---------- [OK]
OLDSTYL1 - identify old style test indicator 2.----------------------- [OK]
BADCHKEQ - CHKEQ should fail on unequal value
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
----------------------------------------------------------------------- [FAIL]
BADCHKTF - CHKTF should fail on false value
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
----------------------------------------------------------------------- [FAIL]
BADERROR - throws an error on purpose
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
----------------------------------------------------------------------- [FAIL]
CALLFAIL - called FAIL to test it
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
----------------------------------------------------------------------- [FAIL]
LEAKSOK - check leaks should be ok------------------------------------- [OK]
LEAKSBAD - check leaks with leak
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
----------------------------------------------------------------------- [FAIL]
NVLDARG1 - check invalid arg in CHKEQ
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
----------------------------------------------------------------------- [FAIL]
ISUTEST - check ISUTEST inside unit test.------------------------------ [OK]
Ran 1 Routine, 11 Entry Tags
Checked 10 tests, with 5 failures and encountered 1 error.
RUNNING UNIT TESTS FOR %utt5 VIA GUI CALLS - Silent
NOW RUNNING UNIT TESTS FOR %uttcovr
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...---------------------------------------- [OK]
COVCOV - - check COVCOV - remove seen lines......---------------------- [OK]
COVRPT...........------------------------------------------------------ [OK]
COVRPTLS - - coverage report returning text in global...........------- [OK]
TRIMDATA - - TRIMDATA in %utcover..------------------------------------ [OK]
LIST - - LIST in %utcover............---------------------------------- [OK]
CACHECOV - - set up routine for analysis in globals..------------------ [OK]
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............------------------------------------------------- [OK]
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........--------------------------- [OK]
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude......--- [OK]
CHKCMDLN - check command line processing of %utt5---------------------- [OK]
CHKGUI - check GUI processing of %utt5--------------------------------- [OK]
CKGUISET - check list of tests returned by GUISET---------------------- [OK]
NEWSTYLE - test return of valid new style or @TEST indicators...------- [OK]
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
Coventry ROU=VERBOSE^%utt6
------------------- RUNNING VERBOSE^%utt7 -------------------
Running tests in VERBOSE mode with fractional millisecond timing
----------------------------------- %utt7 -----------------------------------
T1 - - Make sure Start-up Ran.-------------------------------- [OK] 0.000ms
T5 - - ditto
T5^%utt7 - - ditto - This is an intentional failure
.
T5^%utt7 - - ditto - Intentionally throwing a failure
.------------------------------------------------------------- [FAIL] 0.000m
s
----------------------------------- %utt1 -----------------------------------
----------------------------------- %utt2 -----------------------------------
----------------------------------- %utt4 -----------------------------------
----------------------------------- %utt5 -----------------------------------
----------------------------------- %utt6 -----------------------------------
---------------------------------- %uttcovr ----------------------------------
Ran 7 Routines, 2 Entry Tags
Checked 5 tests, with 2 failures and encountered 0 errors.
Coventry ROU=VERBOSE^%utt7
------------------- RUNNING ^%ut -------------------
RUNNING COMMAND LINE TESTS VIA DOSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
Running command line tests by RUNSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
RUNNING COMMAND LINE UNIT TESTS FOR %utt5
....
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
.
Ran 1 Routine, 11 Entry Tags
Checked 10 tests, with 5 failures and encountered 1 error.
RUNNING UNIT TESTS FOR %utt5 VIA GUI CALLS - Silent
NOW RUNNING UNIT TESTS FOR %uttcovr
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
.........
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
Coventry ROU=^%ut
------------------- RUNNING ^%ut1 -------------------
RUNNING COMMAND LINE TESTS VIA DOSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
Running command line tests by RUNSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
RUNNING COMMAND LINE UNIT TESTS FOR %utt5
....
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
.
Ran 1 Routine, 11 Entry Tags
Checked 10 tests, with 5 failures and encountered 1 error.
RUNNING UNIT TESTS FOR %utt5 VIA GUI CALLS - Silent
NOW RUNNING UNIT TESTS FOR %uttcovr
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
.........
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
Coventry ROU=^%ut1
------------------- RUNNING ^%utcover -------------------
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
Coventry ROU=^%utcover
------------------- RUNNING ^%utt1 -------------------
Running tests in NON-VERBOSE mode
For Verbose mode use DO VERBOSE^%utt1(ARG) where ARG is an integer 1 to 3
ENTER RETURN TO CONTINUE: ....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
.................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 6 Routines, 37 Entry Tags
Checked 109 tests, with 7 failures and encountered 1 error.
Coventry ROU=^%utt1
------------------- RUNNING ^%utt6 -------------------
RUNNING COMMAND LINE TESTS VIA DOSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
Running command line tests by RUNSET^%ut
....
T5^%utt1 - Error count check - This is an intentional failure
.
T5^%utt1 - Error count check - Intentionally throwing a failure
...................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 7 Routines, 39 Entry Tags
Checked 111 tests, with 7 failures and encountered 1 error.
RUNNING COMMAND LINE UNIT TESTS FOR %utt5
....
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
.
Ran 1 Routine, 11 Entry Tags
Checked 10 tests, with 5 failures and encountered 1 error.
RUNNING UNIT TESTS FOR %utt5 VIA GUI CALLS - Silent
NOW RUNNING UNIT TESTS FOR %uttcovr
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
.........
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
Coventry ROU=^%utt6
------------------- RUNNING ^%utt7 -------------------
Running tests in VERBOSE mode
ENTER RETURN TO CONTINUE:
----------------------------------- %utt7 -----------------------------------
T1 - - Make sure Start-up Ran.-------------------------------- [OK] 0.000ms
T5 - - ditto
T5^%utt7 - - ditto - This is an intentional failure
.
T5^%utt7 - - ditto - Intentionally throwing a failure
.------------------------------------------------------------- [FAIL] 0.000m
s
----------------------------------- %utt1 -----------------------------------
----------------------------------- %utt2 -----------------------------------
----------------------------------- %utt4 -----------------------------------
----------------------------------- %utt5 -----------------------------------
----------------------------------- %utt6 -----------------------------------
---------------------------------- %uttcovr ----------------------------------
Ran 7 Routines, 2 Entry Tags
Checked 5 tests, with 2 failures and encountered 0 errors.
Coventry ROU=^%utt7
------------ SUMMARY ------------
Ran 40 Routines, 163 Entry Tags
Checked 531 tests, with 25 failures and encountered 3 errors.
Routine %ut (95.19%) 278 out of 292 lines covered
- Detailed Breakdown
Tag %ut^%ut (100.00%) 2 out of 2 lines covered
Tag CHKEQ^%ut (100.00%) 18 out of 18 lines covered
Tag CHKLEAKS^%ut (100.00%) 2 out of 2 lines covered
Tag CHKTF^%ut (100.00%) 15 out of 15 lines covered
Tag COV^%ut (100.00%) 2 out of 2 lines covered
Tag COVERAGE^%ut (100.00%) 2 out of 2 lines covered
Tag DOSET^%ut (100.00%) 6 out of 6 lines covered
Tag EN^%ut (100.00%) 7 out of 7 lines covered
Tag EN1^%ut (94.12%) 64 out of 68 lines covered
the following is a list of the lines **NOT** covered
EN1+76 . . . I $$GETSYS()=0 S %utStart=$P($NOW(),",",2)
EN1+77 . . . I $$GETSYS()=47 N V S V=$$GTMVER(0),%utStart=$s(V>6.2:$ZH,1:
0)
EN1+88 . . . I $$GETSYS()=0 S %utEnd=$P($NOW(),",",2) S %utElapsed=(%utEn
d-%utStart)*1000,%utElapsed=%utElapsed_"ms"
EN1+89 . . . I $$GETSYS()=47 N V S V=$$GTMVER(0),%utEnd=$s(V>6.2:$ZH,1:0)
S %utElapsed=$$ZHDIF(%utStart,%utEnd)
Tag ERROR^%ut (100.00%) 9 out of 9 lines covered
Tag ERROR1^%ut (100.00%) 9 out of 9 lines covered
Tag FAIL^%ut (100.00%) 2 out of 2 lines covered
Tag GETLIST^%ut (100.00%) 12 out of 12 lines covered
Tag GETSET^%ut (100.00%) 4 out of 4 lines covered
Tag GETSYS^%ut (100.00%) 3 out of 3 lines covered
Tag GETUTVAL^%ut (100.00%) 5 out of 5 lines covered
Tag GTMVER^%ut (100.00%) 1 out of 1 lines covered
Tag GUILOAD^%ut (100.00%) 8 out of 8 lines covered
Tag GUINEXT^%ut (100.00%) 43 out of 43 lines covered
Tag GUISET^%ut (100.00%) 8 out of 8 lines covered
Tag ISUTEST^%ut (100.00%) 1 out of 1 lines covered
Tag LOAD^%ut (100.00%) 10 out of 10 lines covered
Tag LSTUTVAL^%ut (100.00%) 4 out of 4 lines covered
Tag MULTAPIS^%ut (100.00%) 2 out of 2 lines covered
Tag PICKSET^%ut (100.00%) 3 out of 3 lines covered
Tag RUNSET^%ut (100.00%) 9 out of 9 lines covered
Tag SETUT^%ut (100.00%) 6 out of 6 lines covered
Tag SUCCEED^%ut (100.00%) 6 out of 6 lines covered
Tag VERBOSE^%ut (100.00%) 11 out of 11 lines covered
Tag VERBOSE1^%ut (100.00%) 4 out of 4 lines covered
Tag ZHDIF^%ut (0.00%) 0 out of 10 lines covered
the following is a list of the lines **NOT** covered
ZHDIF+1 N SC0 S SC0=$P(%ZH0,",",2)
ZHDIF+2 N SC1 S SC1=$P(%ZH1,",",2)
ZHDIF+3 N DC0 S DC0=$P(%ZH0,",")*86400
ZHDIF+4 N DC1 S DC1=$P(%ZH1,",")*86400
ZHDIF+5 N MCS0 S MCS0=$P(%ZH0,",",3)/1000000
ZHDIF+6 N MCS1 S MCS1=$P(%ZH1,",",3)/1000000
ZHDIF+8 N T0 S T0=SC0+DC0+MCS0
ZHDIF+9 N T1 S T1=SC1+DC1+MCS1
ZHDIF+11 N %ZH2 S %ZH2=T1-T0*1000
ZHDIF+12 QUIT %ZH2
Routine %ut1 (81.82%) 234 out of 286 lines covered
- Detailed Breakdown
Tag %ut1^%ut1 (100.00%) 2 out of 2 lines covered
Tag ACTLINES^%ut1 (100.00%) 8 out of 8 lines covered
Tag CACHECOV^%ut1 (88.24%) 15 out of 17 lines covered
the following is a list of the lines **NOT** covered
CACHECOV+14 . . X "N %,%N S %N=0 X ""ZL @X F XCNP=XCNP+1:1 S %N=%N+1,%=$T
(+%N) Q:$L(%)=0 S @(DIF_XCNP_"""",0)"""")=%""" ; JLI see 160701 note in comment
s at top
CACHECOV+15 . . Q
Tag CHECKTAG^%ut1 (100.00%) 5 out of 5 lines covered
Tag CHEKTEST^%ut1 (100.00%) 17 out of 17 lines covered
Tag CHKTAGS^%ut1 (100.00%) 10 out of 10 lines covered
Tag COV^%ut1 (48.68%) 37 out of 76 lines covered
the following is a list of the lines **NOT** covered
COV+33 . N NMSP S NMSP=$G(NMSPS)
COV+34 . D:NMSP]"" S NMSP="" F S NMSP=$O(NMSPS(NMSP)) Q:NMSP="" D
COV+35 . . S NMSP1=NMSP I NMSP["*" S NMSP1=$P(NMSP,"*")
COV+36 . . I $D(^$R(NMSP1)) S RTNS(NMSP1)=""
COV+37 . . I NMSP["*" S RTN=NMSP1 F S RTN=$O(^$R(RTN)) Q:RTN'[NMSP1 S R
TNS(RTN)=""
COV+38 . . Q
COV+39 . Q
COV+50 . K ^TMP("%utCOVCOHORTSAV",$J)
COV+51 . M ^TMP("%utCOVCOHORTSAV",$J)=^TMP("%utCOVCOHORT",$J)
COV+52 . K ^TMP("%utCOVRESULT",$J)
COV+53 . S ^TMP("%utcovrunning",$J)=1,%utcovxx=1
COV+55 . I ($$GETSYS^%ut()=47) VIEW "TRACE":1:$NA(^TMP("%utCOVRESULT",$J)
) ; GT.M START PROFILING
COV+58 . . N NMSP,NMSPV S NMSP="",NMSPV="" F S NMSPV=$O(RTNS(NMSPV)) Q:N
MSPV="" S NMSP=NMSP_NMSPV_","
COV+59 . . S NMSP=$E(NMSP,1,$L(NMSP)-1)
COV+60 . . S STATUS=##class(%Monitor.System.LineByLine).Start($lb(NMSP),$
lb("RtnLine"),$lb($j))
COV+61 . . I +STATUS'=1 D DecomposeStatus^%apiOBJ(STATUS,.ERR,"-d") F I=1
:1:ERR W ERR(I),!
COV+62 . . I +STATUS'=1 K ERR S EXIT=1
COV+63 . . Q
COV+78 . I ($$GETSYS^%ut()=0) ; CACHE SPECIFIC
COV+79 . K %utcovxx,^TMP("%utcovrunning",$J)
COV+80 . Q
COV+83 . I ($$GETSYS^%ut()=0) D ; CACHE SPECIFIC CODE
COV+84 . . S COVERSAV=$NA(^TMP("%utCOVCOHORTSAV",$J)) K @COVERSAV
COV+85 . . S COVER=$NA(^TMP("%utCOVCOHORT",$J)) K @COVER
COV+86 . . D CACHECOV(COVERSAV,COVER)
COV+87 . . D TOTAGS(COVERSAV,0),TOTAGS(COVER,1)
COV+88 . . D ##class(%Monitor.System.LineByLine).Stop()
COV+89 . . Q
COV+90 . D COVCOV($NA(^TMP("%utCOVCOHORT",$J)),$NA(^TMP("%utCOVRESULT",$J
))) ; Venn diagram matching between globals
COV+92 . I VERBOSITY=-1 D
COV+93 . . K ^TMP("%utCOVREPORT",$J)
COV+94 . . D COVRPTGL^%utcover($NA(^TMP("%utCOVCOHORTSAV",$J)),$NA(^TMP("
%utCOVCOHORT",$J)),$NA(^TMP("%utCOVRESULT",$J)),$NA(^TMP("%utCOVREPORT",$J)))
COV+95 . . K ^TMP("%utCOVCOHORTSAV",$J),^TMP("%utCOVCOHORT",$J),^TMP("%ut
COVRESULT",$J) ; %utCOVREPORT contains the data for the user
COV+96 . . Q
COV+97 . E D
COV+98 . . D COVRPT($NA(^TMP("%utCOVCOHORTSAV",$J)),$NA(^TMP("%utCOVCOHOR
T",$J)),$NA(^TMP("%utCOVRESULT",$J)),VERBOSITY)
COV+99 . . K ^TMP("%utCOVCOHORTSAV",$J),^TMP("%utCOVCOHORT",$J),^TMP("%ut
COVRESULT",$J),^TMP("%utCOVREPORT",$J)
COV+100 . . Q
COV+101 . Q
Tag COVCOV^%ut1 (100.00%) 9 out of 9 lines covered
Tag COVRPT^%ut1 (100.00%) 5 out of 5 lines covered
Tag COVRPTLS^%ut1 (100.00%) 31 out of 31 lines covered
Tag FAIL^%ut1 (100.00%) 12 out of 12 lines covered
Tag GETTAG^%ut1 (100.00%) 4 out of 4 lines covered
Tag GETTREE^%ut1 (100.00%) 7 out of 7 lines covered
Tag GETVALS^%ut1 (0.00%) 0 out of 11 lines covered
the following is a list of the lines **NOT** covered
GETVALS+2 N LINE,MORE,ROUNAME,RSET,VAL,X
GETVALS+4 S RSET=##class(%ResultSet).%New("%Monitor.System.LineByLine:Res
ult")
GETVALS+5 S ROUNAME=##class(%Monitor.System.LineByLine).GetRoutineName(RO
UNUM)
GETVALS+6 S LINE=RSET.Execute(ROUNAME)
GETVALS+7 F LINE=1:1 S MORE=RSET.Next() Q:'MORE D
GETVALS+8 . S X=RSET.GetData(1)
GETVALS+9 . S VAL=$LI(X,MTRICNUM)
GETVALS+10 . S @GLOB@(ROUNAME,LINE,"C")=+VAL ; values are 0 if not seen,
otherwises positive number
GETVALS+11 . Q
GETVALS+12 D RSET.Close()
GETVALS+13 Q
Tag ISUTEST^%ut1 (100.00%) 1 out of 1 lines covered
Tag LINEDATA^%ut1 (100.00%) 9 out of 9 lines covered
Tag NEWSTYLE^%ut1 (100.00%) 4 out of 4 lines covered
Tag NVLDARG^%ut1 (100.00%) 11 out of 11 lines covered
Tag RESETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag RTNANAL^%ut1 (100.00%) 29 out of 29 lines covered
Tag SETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag TOTAGS^%ut1 (100.00%) 13 out of 13 lines covered
Tag UP^%ut1 (100.00%) 1 out of 1 lines covered
Routine %utcover (100.00%) 108 out of 108 lines covered
- Detailed Breakdown
Tag %utcover^%utcover (100.00%) 2 out of 2 lines covered
Tag CHKLEAKS^%utcover (100.00%) 13 out of 13 lines covered
Tag COVENTRY^%utcover (100.00%) 15 out of 15 lines covered
Tag COVERAGE^%utcover (100.00%) 14 out of 14 lines covered
Tag COVRPTGL^%utcover (100.00%) 14 out of 14 lines covered
Tag LIST^%utcover (100.00%) 38 out of 38 lines covered
Tag MULTAPIS^%utcover (100.00%) 5 out of 5 lines covered
Tag SETROUS^%utcover (100.00%) 4 out of 4 lines covered
Tag TRIMDATA^%utcover (100.00%) 3 out of 3 lines covered
Routine %ut (95.19%) 278 out of 292 lines covered
- Summary
Tag %ut^%ut (100.00%) 2 out of 2 lines covered
Tag CHKEQ^%ut (100.00%) 18 out of 18 lines covered
Tag CHKLEAKS^%ut (100.00%) 2 out of 2 lines covered
Tag CHKTF^%ut (100.00%) 15 out of 15 lines covered
Tag COV^%ut (100.00%) 2 out of 2 lines covered
Tag COVERAGE^%ut (100.00%) 2 out of 2 lines covered
Tag DOSET^%ut (100.00%) 6 out of 6 lines covered
Tag EN^%ut (100.00%) 7 out of 7 lines covered
Tag EN1^%ut (94.12%) 64 out of 68 lines covered
Tag ERROR^%ut (100.00%) 9 out of 9 lines covered
Tag ERROR1^%ut (100.00%) 9 out of 9 lines covered
Tag FAIL^%ut (100.00%) 2 out of 2 lines covered
Tag GETLIST^%ut (100.00%) 12 out of 12 lines covered
Tag GETSET^%ut (100.00%) 4 out of 4 lines covered
Tag GETSYS^%ut (100.00%) 3 out of 3 lines covered
Tag GETUTVAL^%ut (100.00%) 5 out of 5 lines covered
Tag GTMVER^%ut (100.00%) 1 out of 1 lines covered
Tag GUILOAD^%ut (100.00%) 8 out of 8 lines covered
Tag GUINEXT^%ut (100.00%) 43 out of 43 lines covered
Tag GUISET^%ut (100.00%) 8 out of 8 lines covered
Tag ISUTEST^%ut (100.00%) 1 out of 1 lines covered
Tag LOAD^%ut (100.00%) 10 out of 10 lines covered
Tag LSTUTVAL^%ut (100.00%) 4 out of 4 lines covered
Tag MULTAPIS^%ut (100.00%) 2 out of 2 lines covered
Tag PICKSET^%ut (100.00%) 3 out of 3 lines covered
Tag RUNSET^%ut (100.00%) 9 out of 9 lines covered
Tag SETUT^%ut (100.00%) 6 out of 6 lines covered
Tag SUCCEED^%ut (100.00%) 6 out of 6 lines covered
Tag VERBOSE^%ut (100.00%) 11 out of 11 lines covered
Tag VERBOSE1^%ut (100.00%) 4 out of 4 lines covered
Tag ZHDIF^%ut (0.00%) 0 out of 10 lines covered
Routine %ut1 (81.82%) 234 out of 286 lines covered
- Summary
Tag %ut1^%ut1 (100.00%) 2 out of 2 lines covered
Tag ACTLINES^%ut1 (100.00%) 8 out of 8 lines covered
Tag CACHECOV^%ut1 (88.24%) 15 out of 17 lines covered
Tag CHECKTAG^%ut1 (100.00%) 5 out of 5 lines covered
Tag CHEKTEST^%ut1 (100.00%) 17 out of 17 lines covered
Tag CHKTAGS^%ut1 (100.00%) 10 out of 10 lines covered
Tag COV^%ut1 (48.68%) 37 out of 76 lines covered
Tag COVCOV^%ut1 (100.00%) 9 out of 9 lines covered
Tag COVRPT^%ut1 (100.00%) 5 out of 5 lines covered
Tag COVRPTLS^%ut1 (100.00%) 31 out of 31 lines covered
Tag FAIL^%ut1 (100.00%) 12 out of 12 lines covered
Tag GETTAG^%ut1 (100.00%) 4 out of 4 lines covered
Tag GETTREE^%ut1 (100.00%) 7 out of 7 lines covered
Tag GETVALS^%ut1 (0.00%) 0 out of 11 lines covered
Tag ISUTEST^%ut1 (100.00%) 1 out of 1 lines covered
Tag LINEDATA^%ut1 (100.00%) 9 out of 9 lines covered
Tag NEWSTYLE^%ut1 (100.00%) 4 out of 4 lines covered
Tag NVLDARG^%ut1 (100.00%) 11 out of 11 lines covered
Tag RESETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag RTNANAL^%ut1 (100.00%) 29 out of 29 lines covered
Tag SETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag TOTAGS^%ut1 (100.00%) 13 out of 13 lines covered
Tag UP^%ut1 (100.00%) 1 out of 1 lines covered
Routine %utcover (100.00%) 108 out of 108 lines covered
- Summary
Tag %utcover^%utcover (100.00%) 2 out of 2 lines covered
Tag CHKLEAKS^%utcover (100.00%) 13 out of 13 lines covered
Tag COVENTRY^%utcover (100.00%) 15 out of 15 lines covered
Tag COVERAGE^%utcover (100.00%) 14 out of 14 lines covered
Tag COVRPTGL^%utcover (100.00%) 14 out of 14 lines covered
Tag LIST^%utcover (100.00%) 38 out of 38 lines covered
Tag MULTAPIS^%utcover (100.00%) 5 out of 5 lines covered
Tag SETROUS^%utcover (100.00%) 4 out of 4 lines covered
Tag TRIMDATA^%utcover (100.00%) 3 out of 3 lines covered
Routine %ut (95.19%) 278 out of 292 lines covered
Routine %ut1 (81.82%) 234 out of 286 lines covered
Routine %utcover (100.00%) 108 out of 108 lines covered
Overall Analysis 619 out of 685 lines covered (90% coverage)
GTM>