iSharkFly-Open
/
M-Unit
mirror of https://github.com/joelivey/M-Unit.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
M-Unit/20170212_GT.M_INSTALL_NO_VI...

1645 lines
77 KiB
Plaintext
Raw Blame History

The following screen capture shows the use of the M-Unit program in a GT.M
system (version 6.3000A) with VistA not installed. The routines were copied
into the GT.M system, the percent ('%') character at the start of the names
changed to an underscore ('_') character, and the routines converted to the
unix line terminators with the dos2unix command. Following this, the unit
tests for the package and coverage analysis were performed twice. In GT.M when
a routine is first run, any apparent problems are identified and listed as the
routine is running. These are the result of sections of code for Intersystems
Cache being present which is not attempted to be run in a GT.M system. The
second capture which does not include this excess material is presented here.
The commands used are:
D ^%utt1 - this runs the unit tests in non-verbose mode, showing periods
for each passing test. Note that due to simply showing a '.'
for successful tests instead of listing every test run, the
non-verbose listing is much more compact and highlights any
problems that are encountered.
D EN^%ut("%utt1",3) - runs unit tests with VERBOSITY set to 3, this
causes each test to be listed with its result and at level
3 it lists execution time for each test in fractional
milliseconds
D ^%uttcovr - runs detailed coverage analysis for the unit test routines
with level set to 3, which lists coverage by routine,
coverage by tag within routines, and within each routine lists
by tag lines that were NOT covered. The routine %uttcovr runs
the tests and routines in multiple ways to cover all of the
different ways that the tests can be run and to cover as well
as possible all of the paths in the code being tested.
Since there was no VistA environment, code related to providing support for
commands based on Options or GUI running of tests in the routine %ut is not
covered and decreases the coverage of this one routine.
GTM>D ^%utt1
Running tests in NON-VERBOSE mode
For Verbose mode use DO VERBOSE^%utt1(ARG) where ARG is an integer 1 to 3
ENTER RETURN TO CONTINUE: ....
T5^%utt1 - Error count check - This is an intentional failure.
.
T5^%utt1 - Error count check - Intentionally throwing a failure
.................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 6 Routines, 37 Entry Tags
Checked 109 tests, with 7 failures and encountered 1 error.
GTM>
GTM>
GTM>d EN^%ut("%utt1",3)
----------------------------------- %utt1 -----------------------------------
T1 - - Make sure Start-up Ran.------------------------------------ [OK] .1ms
T2 - - Make sure Set-up runs.----------------------------------- [OK] .045ms
T3 - - Make sure Teardown runs.--------------------------------- [OK] .113ms
T4 - Entry point using XTMENT.---------------------------------- [OK] .075ms
T5 - Error count check
T5^%utt1 - Error count check - This is an intentional failure.
.
T5^%utt1 - Error count check - Intentionally throwing a failure
.--------------------------------------------------------------- [FAIL] .186ms
T6 - Succeed Entry Point...------------------------------------- [OK] .128ms
T7 - Make sure we write to principal even though we are on another device..[OK]
6.161ms
T8 - If IO starts with another device, write to that device as if it's the prici
pal device.---------------------------------------------------- [OK] 2.341ms
COVRPTGL - coverage report returning global....---------------- [OK] 7.542ms
----------------------------------- %utt2 -----------------------------------
T11 - An @TEST Entry point in Another Routine invoked through XTROU offsets.[OK]
.063ms
T12 - An XTENT offset entry point in Another Routine invoked through XTROU offse
ts.------------------------------------------------------------- [OK] .038ms
----------------------------------- %utt4 -----------------------------------
MAIN - - Test coverage calculations----------------------------- [OK] .106ms
----------------------------------- %utt5 -----------------------------------
NEWSTYLE - identify new style test indicator functionality.----- [OK] .127ms
OLDSTYLE - identify old style test indicator functionality..---- [OK] .05ms
OLDSTYL1 - identify old style test indicator 2.---------------- [OK] .054ms
BADCHKEQ - CHKEQ should fail on unequal value
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
---------------------------------------------------------------- [FAIL] .085ms
BADCHKTF - CHKTF should fail on false value
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
---------------------------------------------------------------- [FAIL] .068ms
BADERROR - throws an error on purpose
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
--------------------------------------------------------------- [FAIL] 6.139ms
CALLFAIL - called FAIL to test it
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
---------------------------------------------------------------- [FAIL] .152ms
LEAKSOK - check leaks should be ok------------------------------ [OK] .473ms
LEAKSBAD - check leaks with leak
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
---------------------------------------------------------------- [FAIL] .177ms
NVLDARG1 - check invalid arg in CHKEQ
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
---------------------------------------------------------------- [FAIL] .072ms
ISUTEST - check ISUTEST inside unit test.----------------------- [OK] .043ms
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude......[OK] .13ms
CHKCMDLN - check command line processing of %utt5--------------- [OK] .035ms
CHKGUI - check GUI processing of %utt5--------------------------- [OK] .03ms
CKGUISET - check list of tests returned by GUISET--------------- [OK] .029ms
NEWSTYLE - test return of valid new style or @TEST indicators... [OK] 2.394ms
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...-------------------------------- [OK] 2.032ms
COVCOV - - check COVCOV - remove seen lines......-------------- [OK] 1.596ms
COVRPT...........---------------------------------------------- [OK] 9.957ms
COVRPTLS - - coverage report returning text in global........... [OK] 8.061ms
TRIMDATA - - TRIMDATA in %utcover..----------------------------- [OK] .333ms
LIST - - LIST in %utcover............-------------------------- [OK] 2.484ms
CACHECOV - - set up routine for analysis in globals..--------- [OK] 28.048ms
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............------------------------------------------ [OK] .283ms
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........------------------- [OK] 2.825ms
Ran 6 Routines, 37 Entry Tags
Checked 109 tests, with 7 failures and encountered 1 error.
GTM>
GTM>d ^%uttcovr
Loading routines to test coverage...
%ut %ut1 %utcover %utf2hex
Routine %utf2hex removed from analysis, since it doesn't have the standard secon
d line
%utt1 %utt2 %utt3 %utt4 %utt5 %utt6 %uttcovr
------------------- RUNNING %uttcovr -------------------
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
------------------- RUNNING ENTRY^%uttcovr -------------------
LEAKSBAD TEST - X NOT SPECIFIED VARIABLE LEAK: X
xxxxxxxxxxxxxxxxxxxx GOING TO COV^%ut FOR %utt5 at 3
Loading routines to test coverage...
%ut1 ....
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
.
Ran 1 Routine, 11 Entry Tags
Checked 10 tests, with 5 failures and encountered 1 error.
xxxxxxxxxxxxxxxxxxxx GOING TO COV^%ut FOR %utt5 at -1
Loading routines to test coverage...
%ut1 ....
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
.
Ran 1 Routine, 11 Entry Tags
Checked 10 tests, with 5 failures and encountered 1 error.
xxxxxxxxxxxxxxxxxxxx GOING TO MULTAPIS for %utt4 and %ut
------------------- RUNNING ^%ut -------------------
NOW RUNNING UNIT TESTS FOR %uttcovr
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
.........
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
------------------- RUNNING ^%utt4 -------------------
----------------------------------- %utt4 -----------------------------------
MAIN - - Test coverage calculations------------------------------------ [OK]
Ran 1 Routine, 1 Entry Tag
Checked 0 test, with 0 failures and encountered 0 errors.
------------ SUMMARY ------------
Ran 2 Routines, 6 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
xxxxxxxxxxxxxxxxxxxx GOING TO COVERAGE for %utt4 and %ut at 3
Loading routines to test coverage...
%ut %ut1 %utcover %utf2hex
Routine %utf2hex removed from analysis, since it doesn't have the standard secon
d line
%utt1 %utt2 %utt3 %utt4 %utt5 %utt6 %uttcovr
------------------- RUNNING ^%ut -------------------
NOW RUNNING UNIT TESTS FOR %uttcovr
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
.........
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
------------------- RUNNING ^%utt4 -------------------
----------------------------------- %utt4 -----------------------------------
MAIN - - Test coverage calculations------------------------------------ [OK]
Ran 1 Routine, 1 Entry Tag
Checked 0 test, with 0 failures and encountered 0 errors.
------------ SUMMARY ------------
Ran 2 Routines, 6 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
Routine %ut (63.99%) 183 out of 286 lines covered
- Detailed Breakdown
Tag %ut^%ut (100.00%) 2 out of 2 lines covered
Tag CHKEQ^%ut (100.00%) 18 out of 18 lines covered
Tag CHKLEAKS^%ut (100.00%) 2 out of 2 lines covered
Tag CHKTF^%ut (100.00%) 15 out of 15 lines covered
Tag COV^%ut (100.00%) 2 out of 2 lines covered
Tag COVERAGE^%ut (100.00%) 2 out of 2 lines covered
Tag DOSET^%ut (0.00%) 0 out of 6 lines covered
the following is a list of the lines **NOT** covered
DOSET+4 N %utROU,%utLIST
DOSET+5 I '$D(%utVERB) S %utVERB=0
DOSET+6 S %utLIST=0
DOSET+7 D GETSET($G(IEN),.%utROU,.%utLIST)
DOSET+8 I %utLIST>0 N IEN,%ut D SETUT,EN1(.%utROU,%utLIST)
DOSET+9 Q
Tag EN^%ut (100.00%) 6 out of 6 lines covered
Tag EN1^%ut (100.00%) 65 out of 65 lines covered
Tag ERROR^%ut (55.56%) 5 out of 9 lines covered
the following is a list of the lines **NOT** covered
ERROR+7 . S %ut("CNT")=%ut("CNT")+1
ERROR+8 . S %utERR=%utERR+1
ERROR+9 . S @%ut("RSLT")@(%ut("CNT"))=%ut("LOC")_XTGUISEP_"ERROR"_XTGUISE
P_$S($$GETSYS()=47:$ZS,1:$ZE)
ERROR+10 . Q
Tag ERROR1^%ut (100.00%) 9 out of 9 lines covered
Tag FAIL^%ut (100.00%) 2 out of 2 lines covered
Tag GETLIST^%ut (0.00%) 0 out of 11 lines covered
the following is a list of the lines **NOT** covered
GETLIST+1 N I,%utROUL,%utROUN,%ut,XTCOMNT,XTVALUE,%utCNT
GETLIST+2 S XTVALUE=$NA(^TMP("GUI-MUNIT",$J)) K @XTVALUE
GETLIST+3 S %utCNT=0,XTCOMNT=""
GETLIST+4 D GETTREE^%ut1(.%utROU,%utLIST)
GETLIST+5 F I=1:1 Q:'$D(%utROU(I)) S %utROUL(%utROU(I))=""
GETLIST+6 S %utROUN="" F S %utROUN=$O(%utROUL(%utROUN)) Q:%utROUN="" D
LOAD(%utROUN,.%utCNT,XTVALUE,XTCOMNT,.%utROUL)
GETLIST+7 M @%utRSLT=@XTVALUE
GETLIST+8 K @%utRSLT@("SHUTDOWN")
GETLIST+9 K @%utRSLT@("STARTUP")
GETLIST+10 S @XTVALUE@("LASTROU")=""
GETLIST+11 Q
Tag GETSET^%ut (0.00%) 0 out of 4 lines covered
the following is a list of the lines **NOT** covered
GETSET+1 N IENS,%utROOT
GETSET+3 S IENS=IEN_"," D GETS^DIQ(17.9001,IENS,"1*","","%utROOT")
GETSET+4 S %utLIST=0,IENS="" F S IENS=$O(%utROOT(17.90011,IENS)) Q:IENS=
"" S %utLIST=%utLIST+1,%utROU(%utLIST)=%utROOT(17.90011,IENS,.01)
GETSET+5 Q
Tag GETSYS^%ut (100.00%) 3 out of 3 lines covered
Tag GETUTVAL^%ut (100.00%) 5 out of 5 lines covered
Tag GTMVER^%ut (100.00%) 1 out of 1 lines covered
Tag GUILOAD^%ut (0.00%) 0 out of 8 lines covered
the following is a list of the lines **NOT** covered
GUILOAD+1 N %utROU,%ut
GUILOAD+2 D SETUT
GUILOAD+3 S %ut("RSLT")=$NA(^TMP("MUNIT-%utRSLT",$J)) K @%ut("RSLT")
GUILOAD+4 S %utROU(1)=%utROUN
GUILOAD+5 D GETLIST(.%utROU,1,%ut("RSLT"))
GUILOAD+6 S @%ut("RSLT")@(1)=(@%ut("RSLT")@(1))_"^1"
GUILOAD+7 S %utRSLT=%ut("RSLT")
GUILOAD+8 Q
Tag GUINEXT^%ut (0.00%) 0 out of 43 lines covered
the following is a list of the lines **NOT** covered
GUINEXT+5 N %utETRY,%utROUT,XTOLROU,XTVALUE,%utERR,%utGUI
GUINEXT+6 N %ut
GUINEXT+7 I $G(XTGUISEP)="" S XTGUISEP="^"
GUINEXT+8 D SETUT
GUINEXT+9 S %ut("LOC")=%utLOC
GUINEXT+10 S %ut("CURR")=0,%ut("ECNT")=0,%ut("FAIL")=0,%ut("CHK")=0,%ut("
NENT")=0,%ut("ERRN")=0
GUINEXT+11 S XTVALUE=$NA(^TMP("GUI-MUNIT",$J))
GUINEXT+12 S %ut("RSLT")=$NA(^TMP("GUINEXT",$J)) K @%ut("RSLT")
GUINEXT+13 S %utRSLT=%ut("RSLT")
GUINEXT+14 S %utETRY=$P(%utLOC,U),%utROUT=$P(%utLOC,U,2),XTOLROU=$G(@XTVA
LUE@("LASTROU"))
GUINEXT+15 S %utGUI=1
GUINEXT+16 S %ut("CHK")=0,%ut("CNT")=1,%utERR=0
GUINEXT+17 D I %utROUT="" S @%utRSLT@(1)="" Q ; 141018 JLI - Have to le
ave XTVALUE intact, in case they simply run again for STARTUP, etc.
GUINEXT+18 . I XTOLROU="",$D(@XTVALUE@("STARTUP")) D
GUINEXT+19 . . S %ut("LOC")=@XTVALUE@("STARTUP")
GUINEXT+20 . . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+21 . . D @(@XTVALUE@("STARTUP"))
GUINEXT+22 . . Q
GUINEXT+23 . S @XTVALUE@("LASTROU")=%utROUT I %utROUT'="",$T(@("SETUP^"_%
utROUT))'="" D
GUINEXT+24 . . S %ut("LOC")="SETUP^"_%utROUT
GUINEXT+25 . . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+26 . . D @("SETUP^"_%utROUT)
GUINEXT+27 . . Q
GUINEXT+28 . I %utROUT="",$D(@XTVALUE@("SHUTDOWN")) D
GUINEXT+29 . . S %ut("LOC")=@XTVALUE@("SHUTDOWN")
GUINEXT+30 . . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+31 . . D @(@XTVALUE@("SHUTDOWN"))
GUINEXT+32 . . Q
GUINEXT+33 . Q
GUINEXT+34 S %ut("LOC")=%utLOC
GUINEXT+35 S %ut("CHK")=0,%ut("CNT")=1,%utERR=0
GUINEXT+36 D ; to limit range of error trap so we continue through other
tests
GUINEXT+37 . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+38 . D @%ut("LOC")
GUINEXT+39 . Q
GUINEXT+40 I $T(@("TEARDOWN^"_%utROUT))'="" D
GUINEXT+41 . S %ut("LOC")="TEARDOWN^"_%utROUT
GUINEXT+42 . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+43 . D @("TEARDOWN^"_%utROUT)
GUINEXT+44 . Q
GUINEXT+45 S @%ut("RSLT")@(1)=%ut("CHK")_XTGUISEP_(%ut("CNT")-1-%utERR)_X
TGUISEP_%utERR
GUINEXT+46 K ^TMP("%ut",$J,"UTVALS")
GUINEXT+47 Q
Tag GUISET^%ut (0.00%) 0 out of 8 lines covered
the following is a list of the lines **NOT** covered
GUISET+1 N %utROU,%utLIST,%ut
GUISET+2 D SETUT
GUISET+3 S %ut("RSLT")=$NA(^TMP("MUNIT-%utRSLT",$J)) K @%ut("RSLT")
GUISET+4 D GETSET(XTSET,.%utROU,.%utLIST)
GUISET+5 D GETLIST(.%utROU,%utLIST,%ut("RSLT"))
GUISET+6 S @%ut("RSLT")@(1)=(@%ut("RSLT")@(1))_"^1" ; 110719 mark as new
version
GUISET+7 S %utRSLT=%ut("RSLT")
GUISET+8 Q
Tag ISUTEST^%ut (100.00%) 1 out of 1 lines covered
Tag LOAD^%ut (0.00%) 0 out of 10 lines covered
the following is a list of the lines **NOT** covered
LOAD+1 I $T(@("^"_%utROUN))="" S %utNCNT=%utNCNT+1,@XTVALUE@(%utNCNT)=%ut
ROUN_"^^*** ERROR - ROUTINE NAME NOT FOUND" Q
LOAD+2 S %utNCNT=%utNCNT+1,@XTVALUE@(%utNCNT)=%utROUN_U_U_XTCOMNT
LOAD+3 N %utI,XTX1,XTX2,LINE,LIST,I
LOAD+4 I $T(@("STARTUP^"_%utROUN))'="",'$D(@XTVALUE@("STARTUP")) S @XTVAL
UE@("STARTUP")="STARTUP^"_%utROUN
LOAD+5 I $T(@("SHUTDOWN^"_%utROUN))'="",'$D(@XTVALUE@("SHUTDOWN")) S @XTV
ALUE@("SHUTDOWN")="SHUTDOWN^"_%utROUN
LOAD+6 D NEWSTYLE^%ut1(.LIST,%utROUN)
LOAD+7 F I=1:1:LIST S %utNCNT=%utNCNT+1,@XTVALUE@(%utNCNT)=%utROUN_U_LIST
(I)
LOAD+8 F %utI=1:1 S LINE=$T(@("XTENT+"_%utI_"^"_%utROUN)) S XTX1=$P(LINE,
";",3) Q:XTX1="" S XTX2=$P(LINE,";",4),%utNCNT=%utNCNT+1,@XTVALUE@(%utNCNT)=%ut
ROUN_U_XTX1_U_XTX2
LOAD+9 F %utI=1:1 S LINE=$T(@("XTROU+"_%utI_"^"_%utROUN)) S XTX1=$P(LINE,
";",3) Q:XTX1="" S XTCOMNT=$P(LINE,";",4) I '$D(%utROUL(XTX1)) S %utROUL(XTX1)=
"" D LOAD(XTX1,.%utNCNT,XTVALUE,XTCOMNT,.%utROUL)
LOAD+10 Q
Tag LSTUTVAL^%ut (100.00%) 4 out of 4 lines covered
Tag MULTAPIS^%ut (100.00%) 2 out of 2 lines covered
Tag PICKSET^%ut (100.00%) 3 out of 3 lines covered
Tag RUNSET^%ut (0.00%) 0 out of 9 lines covered
the following is a list of the lines **NOT** covered
RUNSET+1 N Y,%utROU,%utLIST,%utVERB
RUNSET+2 Q:$G(SETNAME)=""
RUNSET+3 S %utVERB=$G(VERBOSE,0)
RUNSET+4 S Y=+$$FIND1^DIC(17.9001,"","X",SETNAME) Q:Y'>0
RUNSET+5 D GETSET(Y,.%utROU,.%utLIST)
RUNSET+6 N Y,SETNAME,%ut
RUNSET+7 D SETUT
RUNSET+8 D EN1(.%utROU,%utLIST)
RUNSET+9 Q
Tag SETUT^%ut (100.00%) 6 out of 6 lines covered
Tag SUCCEED^%ut (100.00%) 6 out of 6 lines covered
Tag VERBOSE^%ut (100.00%) 10 out of 10 lines covered
Tag VERBOSE1^%ut (100.00%) 4 out of 4 lines covered
Tag ZHDIF^%ut (100.00%) 10 out of 10 lines covered
Routine %ut1 (82.16%) 221 out of 269 lines covered
- Detailed Breakdown
Tag %ut1^%ut1 (100.00%) 2 out of 2 lines covered
Tag ACTLINES^%ut1 (100.00%) 8 out of 8 lines covered
Tag CACHECOV^%ut1 (88.24%) 15 out of 17 lines covered
the following is a list of the lines **NOT** covered
CACHECOV+14 . . X "N %,%N S %N=0 X ""ZL @X F XCNP=XCNP+1:1 S %N=%N+1,%=$T
(+%N) Q:$L(%)=0 S @(DIF_XCNP_"""",0)"""")=%""" ; JLI see 160701 note in comment
s at top
CACHECOV+15 . . Q
Tag CHECKTAG^%ut1 (100.00%) 10 out of 10 lines covered
Tag CHEKTEST^%ut1 (100.00%) 9 out of 9 lines covered
Tag COV^%ut1 (51.39%) 37 out of 72 lines covered
the following is a list of the lines **NOT** covered
COV+35 . N NMSP S NMSP=$G(NMSPS)
COV+36 . D:NMSP]"" S NMSP="" F S NMSP=$O(NMSPS(NMSP)) Q:NMSP="" D
COV+37 . . S NMSP1=NMSP I NMSP["*" S NMSP1=$P(NMSP,"*")
COV+38 . . I $D(^$R(NMSP1)) S RTNS(NMSP1)=""
COV+39 . . I NMSP["*" S RTN=NMSP1 F S RTN=$O(^$R(RTN)) Q:RTN'[NMSP1 S R
TNS(RTN)=""
COV+40 . . Q
COV+41 . Q
COV+52 . K ^TMP("%utCOVCOHORTSAV",$J)
COV+53 . M ^TMP("%utCOVCOHORTSAV",$J)=^TMP("%utCOVCOHORT",$J)
COV+54 . K ^TMP("%utCOVRESULT",$J)
COV+55 . S ^TMP("%utcovrunning",$J)=1,%utcovxx=1
COV+57 . I ($$GETSYS^%ut()=47) VIEW "TRACE":1:$NA(^TMP("%utCOVRESULT",$J)
) ; GT.M START PROFILING
COV+60 . . N NMSP,NMSPV S NMSP="",NMSPV="" F S NMSPV=$O(RTNS(NMSPV)) Q:N
MSPV="" S NMSP=NMSP_NMSPV_","
COV+61 . . S NMSP=$E(NMSP,1,$L(NMSP)-1)
COV+62 . . S STATUS=##class(%Monitor.System.LineByLine).Start($lb(NMSP),$
lb("RtnLine"),$lb($j))
COV+63 . . I +STATUS'=1 D DecomposeStatus^%apiOBJ(STATUS,.ERR,"-d") F I=1
:1:ERR W ERR(I),!
COV+64 . . I +STATUS'=1 K ERR S EXIT=1
COV+65 . . Q
COV+79 . I ($$GETSYS^%ut()=0) ; CACHE SPECIFIC
COV+80 . K %utcovxx,^TMP("%utcovrunning",$J)
COV+81 . Q
COV+84 . I ($$GETSYS^%ut()=0) D ; CACHE SPECIFIC CODE
COV+85 . . S COVERSAV=$NA(^TMP("%utCOVCOHORTSAV",$J)) K @COVERSAV
COV+86 . . S COVER=$NA(^TMP("%utCOVCOHORT",$J)) K @COVER
COV+87 . . D CACHECOV(COVERSAV,COVER)
COV+88 . . D TOTAGS(COVERSAV,0),TOTAGS(COVER,1)
COV+89 . . D ##class(%Monitor.System.LineByLine).Stop()
COV+90 . . Q
COV+91 . D COVCOV($NA(^TMP("%utCOVCOHORT",$J)),$NA(^TMP("%utCOVRESULT",$J
))) ; Venn diagram matching between globals
COV+93 . I VERBOSITY=-1 D
COV+94 . . K ^TMP("%utCOVREPORT",$J)
COV+95 . . D COVRPTGL^%utcover($NA(^TMP("%utCOVCOHORTSAV",$J)),$NA(^TMP("
%utCOVCOHORT",$J)),$NA(^TMP("%utCOVRESULT",$J)),$NA(^TMP("%utCOVREPORT",$J)))
COV+96 . . Q
COV+97 . E D COVRPT($NA(^TMP("%utCOVCOHORTSAV",$J)),$NA(^TMP("%utCOVCOHO
RT",$J)),$NA(^TMP("%utCOVRESULT",$J)),VERBOSITY)
COV+98 . Q
Tag COVCOV^%ut1 (100.00%) 9 out of 9 lines covered
Tag COVRPT^%ut1 (100.00%) 5 out of 5 lines covered
Tag COVRPTLS^%ut1 (100.00%) 31 out of 31 lines covered
Tag FAIL^%ut1 (100.00%) 12 out of 12 lines covered
Tag GETTAG^%ut1 (100.00%) 4 out of 4 lines covered
Tag GETTREE^%ut1 (100.00%) 7 out of 7 lines covered
Tag GETVALS^%ut1 (0.00%) 0 out of 11 lines covered
the following is a list of the lines **NOT** covered
GETVALS+2 N LINE,MORE,ROUNAME,RSET,VAL,X
GETVALS+4 S RSET=##class(%ResultSet).%New("%Monitor.System.LineByLine:Res
ult")
GETVALS+5 S ROUNAME=##class(%Monitor.System.LineByLine).GetRoutineName(RO
UNUM)
GETVALS+6 S LINE=RSET.Execute(ROUNAME)
GETVALS+7 F LINE=1:1 S MORE=RSET.Next() Q:'MORE D
GETVALS+8 . S X=RSET.GetData(1)
GETVALS+9 . S VAL=$LI(X,MTRICNUM)
GETVALS+10 . S @GLOB@(ROUNAME,LINE,"C")=+VAL ; values are 0 if not seen,
otherwises positive number
GETVALS+11 . Q
GETVALS+12 D RSET.Close()
GETVALS+13 Q
Tag ISUTEST^%ut1 (100.00%) 1 out of 1 lines covered
Tag LINEDATA^%ut1 (100.00%) 9 out of 9 lines covered
Tag NEWSTYLE^%ut1 (100.00%) 4 out of 4 lines covered
Tag NVLDARG^%ut1 (100.00%) 11 out of 11 lines covered
Tag RESETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag RTNANAL^%ut1 (100.00%) 29 out of 29 lines covered
Tag SETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag TOTAGS^%ut1 (100.00%) 13 out of 13 lines covered
Tag UP^%ut1 (100.00%) 1 out of 1 lines covered
Routine %utcover (100.00%) 107 out of 107 lines covered
- Detailed Breakdown
Tag %utcover^%utcover (100.00%) 2 out of 2 lines covered
Tag CHKLEAKS^%utcover (100.00%) 13 out of 13 lines covered
Tag COVENTRY^%utcover (100.00%) 15 out of 15 lines covered
Tag COVERAGE^%utcover (100.00%) 13 out of 13 lines covered
Tag COVRPTGL^%utcover (100.00%) 14 out of 14 lines covered
Tag LIST^%utcover (100.00%) 38 out of 38 lines covered
Tag MULTAPIS^%utcover (100.00%) 5 out of 5 lines covered
Tag SETROUS^%utcover (100.00%) 4 out of 4 lines covered
Tag TRIMDATA^%utcover (100.00%) 3 out of 3 lines covered
Routine %ut (63.99%) 183 out of 286 lines covered
- Summary
Tag %ut^%ut (100.00%) 2 out of 2 lines covered
Tag CHKEQ^%ut (100.00%) 18 out of 18 lines covered
Tag CHKLEAKS^%ut (100.00%) 2 out of 2 lines covered
Tag CHKTF^%ut (100.00%) 15 out of 15 lines covered
Tag COV^%ut (100.00%) 2 out of 2 lines covered
Tag COVERAGE^%ut (100.00%) 2 out of 2 lines covered
Tag DOSET^%ut (0.00%) 0 out of 6 lines covered
Tag EN^%ut (100.00%) 6 out of 6 lines covered
Tag EN1^%ut (100.00%) 65 out of 65 lines covered
Tag ERROR^%ut (55.56%) 5 out of 9 lines covered
Tag ERROR1^%ut (100.00%) 9 out of 9 lines covered
Tag FAIL^%ut (100.00%) 2 out of 2 lines covered
Tag GETLIST^%ut (0.00%) 0 out of 11 lines covered
Tag GETSET^%ut (0.00%) 0 out of 4 lines covered
Tag GETSYS^%ut (100.00%) 3 out of 3 lines covered
Tag GETUTVAL^%ut (100.00%) 5 out of 5 lines covered
Tag GTMVER^%ut (100.00%) 1 out of 1 lines covered
Tag GUILOAD^%ut (0.00%) 0 out of 8 lines covered
Tag GUINEXT^%ut (0.00%) 0 out of 43 lines covered
Tag GUISET^%ut (0.00%) 0 out of 8 lines covered
Tag ISUTEST^%ut (100.00%) 1 out of 1 lines covered
Tag LOAD^%ut (0.00%) 0 out of 10 lines covered
Tag LSTUTVAL^%ut (100.00%) 4 out of 4 lines covered
Tag MULTAPIS^%ut (100.00%) 2 out of 2 lines covered
Tag PICKSET^%ut (100.00%) 3 out of 3 lines covered
Tag RUNSET^%ut (0.00%) 0 out of 9 lines covered
Tag SETUT^%ut (100.00%) 6 out of 6 lines covered
Tag SUCCEED^%ut (100.00%) 6 out of 6 lines covered
Tag VERBOSE^%ut (100.00%) 10 out of 10 lines covered
Tag VERBOSE1^%ut (100.00%) 4 out of 4 lines covered
Tag ZHDIF^%ut (100.00%) 10 out of 10 lines covered
Routine %ut1 (82.16%) 221 out of 269 lines covered
- Summary
Tag %ut1^%ut1 (100.00%) 2 out of 2 lines covered
Tag ACTLINES^%ut1 (100.00%) 8 out of 8 lines covered
Tag CACHECOV^%ut1 (88.24%) 15 out of 17 lines covered
Tag CHECKTAG^%ut1 (100.00%) 10 out of 10 lines covered
Tag CHEKTEST^%ut1 (100.00%) 9 out of 9 lines covered
Tag COV^%ut1 (51.39%) 37 out of 72 lines covered
Tag COVCOV^%ut1 (100.00%) 9 out of 9 lines covered
Tag COVRPT^%ut1 (100.00%) 5 out of 5 lines covered
Tag COVRPTLS^%ut1 (100.00%) 31 out of 31 lines covered
Tag FAIL^%ut1 (100.00%) 12 out of 12 lines covered
Tag GETTAG^%ut1 (100.00%) 4 out of 4 lines covered
Tag GETTREE^%ut1 (100.00%) 7 out of 7 lines covered
Tag GETVALS^%ut1 (0.00%) 0 out of 11 lines covered
Tag ISUTEST^%ut1 (100.00%) 1 out of 1 lines covered
Tag LINEDATA^%ut1 (100.00%) 9 out of 9 lines covered
Tag NEWSTYLE^%ut1 (100.00%) 4 out of 4 lines covered
Tag NVLDARG^%ut1 (100.00%) 11 out of 11 lines covered
Tag RESETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag RTNANAL^%ut1 (100.00%) 29 out of 29 lines covered
Tag SETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag TOTAGS^%ut1 (100.00%) 13 out of 13 lines covered
Tag UP^%ut1 (100.00%) 1 out of 1 lines covered
Routine %utcover (100.00%) 107 out of 107 lines covered
- Summary
Tag %utcover^%utcover (100.00%) 2 out of 2 lines covered
Tag CHKLEAKS^%utcover (100.00%) 13 out of 13 lines covered
Tag COVENTRY^%utcover (100.00%) 15 out of 15 lines covered
Tag COVERAGE^%utcover (100.00%) 13 out of 13 lines covered
Tag COVRPTGL^%utcover (100.00%) 14 out of 14 lines covered
Tag LIST^%utcover (100.00%) 38 out of 38 lines covered
Tag MULTAPIS^%utcover (100.00%) 5 out of 5 lines covered
Tag SETROUS^%utcover (100.00%) 4 out of 4 lines covered
Tag TRIMDATA^%utcover (100.00%) 3 out of 3 lines covered
Routine %ut (63.99%) 183 out of 286 lines covered
Routine %ut1 (82.16%) 221 out of 269 lines covered
Routine %utcover (100.00%) 107 out of 107 lines covered
Overall Analysis 511 out of 662 lines covered (77% coverage)
xxxxxxxxxxxxxxxxxxxx LISTING DATA VIA LIST
Routine %ut (63.99%) 183 out of 286 lines covered
- Detailed Breakdown
Tag %ut^%ut (100.00%) 2 out of 2 lines covered
Tag CHKEQ^%ut (100.00%) 18 out of 18 lines covered
Tag CHKLEAKS^%ut (100.00%) 2 out of 2 lines covered
Tag CHKTF^%ut (100.00%) 15 out of 15 lines covered
Tag COV^%ut (100.00%) 2 out of 2 lines covered
Tag COVERAGE^%ut (100.00%) 2 out of 2 lines covered
Tag DOSET^%ut (0.00%) 0 out of 6 lines covered
the following is a list of the lines **NOT** covered
DOSET+4 N %utROU,%utLIST
DOSET+5 I '$dotd021117ltD(%utVERB) S %utVERB=0
DOSET+6 S %utLIST=0
DOSET+7 D GETSET($G(IEN),.%utROU,.%utLIST)
DOSET+8 I %utLIST>0 N IEN,%ut D SETUT,EN1(.%utROU,%utLIST)
DOSET+9 Q
Tag EN^%ut (100.00%) 6 out of 6 lines covered
Tag EN1^%ut (100.00%) 65 out of 65 lines covered
Tag ERROR^%ut (55.56%) 5 out of 9 lines covered
the following is a list of the lines **NOT** covered
ERROR+7 . S %ut("CNT")=%ut("CNT")+1
ERROR+8 . S %utERR=%utERR+1
ERROR+9 . S @%ut("RSLT")@(%ut("CNT"))=%ut("LOC")_XTGUISEP_"ERROR"_XTGUISE
P_$S($$GETSYS()=47:$ZS,1:$ZE)
ERROR+10 . Q
Tag ERROR1^%ut (100.00%) 9 out of 9 lines covered
Tag FAIL^%ut (100.00%) 2 out of 2 lines covered
Tag GETLIST^%ut (0.00%) 0 out of 11 lines covered
the following is a list of the lines **NOT** covered
GETLIST+1 N I,%utROUL,%utROUN,%ut,XTCOMNT,XTVALUE,%utCNT
GETLIST+2 S XTVALUE=$NA(^TMP("GUI-MUNIT",$J)) K @XTVALUE
GETLIST+3 S %utCNT=0,XTCOMNT=""
GETLIST+4 D GETTREE^%ut1(.%utROU,%utLIST)
GETLIST+5 F I=1:1 Q:'$D(%utROU(I)) S %utROUL(%utROU(I))=""
GETLIST+6 S %utROUN="" F S %utROUN=$O(%utROUL(%utROUN)) Q:%utROUN="" D
LOAD(%utROUN,.%utCNT,XTVALUE,XTCOMNT,.%utROUL)
GETLIST+7 M @%utRSLT=@XTVALUE
GETLIST+8 K @%utRSLT@("SHUTDOWN")
GETLIST+9 K @%utRSLT@("STARTUP")
GETLIST+10 S @XTVALUE@("LASTROU")=""
GETLIST+11 Q
Tag GETSET^%ut (0.00%) 0 out of 4 lines covered
the following is a list of the lines **NOT** covered
GETSET+1 N IENS,%utROOT
GETSET+3 S IENS=IEN_"," D GETS^DIQ(17.9001,IENS,"1*","","%utROOT")
GETSET+4 S %utLIST=0,IENS="" F S IENS=$O(%utROOT(17.90011,IENS)) Q:IENS=
"" S %utLIST=%utLIST+1,%utROU(%utLIST)=%utROOT(17.90011,IENS,.01)
GETSET+5 Q
Tag GETSYS^%ut (100.00%) 3 out of 3 lines covered
Tag GETUTVAL^%ut (100.00%) 5 out of 5 lines covered
Tag GTMVER^%ut (100.00%) 1 out of 1 lines covered
Tag GUILOAD^%ut (0.00%) 0 out of 8 lines covered
the following is a list of the lines **NOT** covered
GUILOAD+1 N %utROU,%ut
GUILOAD+2 D SETUT
GUILOAD+3 S %ut("RSLT")=$NA(^TMP("MUNIT-%utRSLT",$J)) K @%ut("RSLT")
GUILOAD+4 S %utROU(1)=%utROUN
GUILOAD+5 D GETLIST(.%utROU,1,%ut("RSLT"))
GUILOAD+6 S @%ut("RSLT")@(1)=(@%ut("RSLT")@(1))_"^1"
GUILOAD+7 S %utRSLT=%ut("RSLT")
GUILOAD+8 Q
Tag GUINEXT^%ut (0.00%) 0 out of 43 lines covered
the following is a list of the lines **NOT** covered
GUINEXT+5 N %utETRY,%utROUT,XTOLROU,XTVALUE,%utERR,%utGUI
GUINEXT+6 N %ut
GUINEXT+7 I $G(XTGUISEP)="" S XTGUISEP="^"
GUINEXT+8 D SETUT
GUINEXT+9 S %ut("LOC")=%utLOC
GUINEXT+10 S %ut("CURR")=0,%ut("ECNT")=0,%ut("FAIL")=0,%ut("CHK")=0,%ut("
NENT")=0,%ut("ERRN")=0
GUINEXT+11 S XTVALUE=$NA(^TMP("GUI-MUNIT",$J))
GUINEXT+12 S %ut("RSLT")=$NA(^TMP("GUINEXT",$J)) K @%ut("RSLT")
GUINEXT+13 S %utRSLT=%ut("RSLT")
GUINEXT+14 S %utETRY=$P(%utLOC,U),%utROUT=$P(%utLOC,U,2),XTOLROU=$G(@XTVA
LUE@("LASTROU"))
GUINEXT+15 S %utGUI=1
GUINEXT+16 S %ut("CHK")=0,%ut("CNT")=1,%utERR=0
GUINEXT+17 D I %utROUT="" S @%utRSLT@(1)="" Q ; 141018 JLI - Have to le
ave XTVALUE intact, in case they simply run again for STARTUP, etc.
GUINEXT+18 . I XTOLROU="",$D(@XTVALUE@("STARTUP")) D
GUINEXT+19 . . S %ut("LOC")=@XTVALUE@("STARTUP")
GUINEXT+20 . . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+21 . . D @(@XTVALUE@("STARTUP"))
GUINEXT+22 . . Q
GUINEXT+23 . S @XTVALUE@("LASTROU")=%utROUT I %utROUT'="",$T(@("SETUP^"_%
utROUT))'="" D
GUINEXT+24 . . S %ut("LOC")="SETUP^"_%utROUT
GUINEXT+25 . . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+26 . . D @("SETUP^"_%utROUT)
GUINEXT+27 . . Q
GUINEXT+28 . I %utROUT="",$D(@XTVALUE@("SHUTDOWN")) D
GUINEXT+29 . . S %ut("LOC")=@XTVALUE@("SHUTDOWN")
GUINEXT+30 . . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+31 . . D @(@XTVALUE@("SHUTDOWN"))
GUINEXT+32 . . Q
GUINEXT+33 . Q
GUINEXT+34 S %ut("LOC")=%utLOC
GUINEXT+35 S %ut("CHK")=0,%ut("CNT")=1,%utERR=0
GUINEXT+36 D ; to limit range of error trap so we continue through other
tests
GUINEXT+37 . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+38 . D @%ut("LOC")
GUINEXT+39 . Q
GUINEXT+40 I $T(@("TEARDOWN^"_%utROUT))'="" D
GUINEXT+41 . S %ut("LOC")="TEARDOWN^"_%utROUT
GUINEXT+42 . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+43 . D @("TEARDOWN^"_%utROUT)
GUINEXT+44 . Q
GUINEXT+45 S @%ut("RSLT")@(1)=%ut("CHK")_XTGUISEP_(%ut("CNT")-1-%utERR)_X
TGUISEP_%utERR
GUINEXT+46 K ^TMP("%ut",$J,"UTVALS")
GUINEXT+47 Q
Tag GUISET^%ut (0.00%) 0 out of 8 lines covered
the following is a list of the lines **NOT** covered
GUISET+1 N %utROU,%utLIST,%ut
GUISET+2 D SETUT
GUISET+3 S %ut("RSLT")=$NA(^TMP("MUNIT-%utRSLT",$J)) K @%ut("RSLT")
GUISET+4 D GETSET(XTSET,.%utROU,.%utLIST)
GUISET+5 D GETLIST(.%utROU,%utLIST,%ut("RSLT"))
GUISET+6 S @%ut("RSLT")@(1)=(@%ut("RSLT")@(1))_"^1" ; 110719 mark as new
version
GUISET+7 S %utRSLT=%ut("RSLT")
GUISET+8 Q
Tag ISUTEST^%ut (100.00%) 1 out of 1 lines covered
Tag LOAD^%ut (0.00%) 0 out of 10 lines covered
the following is a list of the lines **NOT** covered
LOAD+1 I $T(@("^"_%utROUN))="" S %utNCNT=%utNCNT+1,@XTVALUE@(%utNCNT)=%ut
ROUN_"^^*** ERROR - ROUTINE NAME NOT FOUND" Q
LOAD+2 S %utNCNT=%utNCNT+1,@XTVALUE@(%utNCNT)=%utROUN_U_U_XTCOMNT
LOAD+3 N %utI,XTX1,XTX2,LINE,LIST,I
LOAD+4 I $T(@("STARTUP^"_%utROUN))'="",'$D(@XTVALUE@("STARTUP")) S @XTVAL
UE@("STARTUP")="STARTUP^"_%utROUN
LOAD+5 I $T(@("SHUTDOWN^"_%utROUN))'="",'$D(@XTVALUE@("SHUTDOWN")) S @XTV
ALUE@("SHUTDOWN")="SHUTDOWN^"_%utROUN
LOAD+6 D NEWSTYLE^%ut1(.LIST,%utROUN)
LOAD+7 F I=1:1:LIST S %utNCNT=%utNCNT+1,@XTVALUE@(%utNCNT)=%utROUN_U_LIST
(I)
LOAD+8 F %utI=1:1 S LINE=$T(@("XTENT+"_%utI_"^"_%utROUN)) S XTX1=$P(LINE,
";",3) Q:XTX1="" S XTX2=$P(LINE,";",4),%utNCNT=%utNCNT+1,@XTVALUE@(%utNCNT)=%ut
ROUN_U_XTX1_U_XTX2
LOAD+9 F %utI=1:1 S LINE=$T(@("XTROU+"_%utI_"^"_%utROUN)) S XTX1=$P(LINE,
";",3) Q:XTX1="" S XTCOMNT=$P(LINE,";",4) I '$D(%utROUL(XTX1)) S %utROUL(XTX1)=
"" D LOAD(XTX1,.%utNCNT,XTVALUE,XTCOMNT,.%utROUL)
LOAD+10 Q
Tag LSTUTVAL^%ut (100.00%) 4 out of 4 lines covered
Tag MULTAPIS^%ut (100.00%) 2 out of 2 lines covered
Tag PICKSET^%ut (100.00%) 3 out of 3 lines covered
Tag RUNSET^%ut (0.00%) 0 out of 9 lines covered
the following is a list of the lines **NOT** covered
RUNSET+1 N Y,%utROU,%utLIST,%utVERB
RUNSET+2 Q:$G(SETNAME)=""
RUNSET+3 S %utVERB=$G(VERBOSE,0)
RUNSET+4 S Y=+$$FIND1^DIC(17.9001,"","X",SETNAME) Q:Y'>0
RUNSET+5 D GETSET(Y,.%utROU,.%utLIST)
RUNSET+6 N Y,SETNAME,%ut
RUNSET+7 D SETUT
RUNSET+8 D EN1(.%utROU,%utLIST)
RUNSET+9 Q
Tag SETUT^%ut (100.00%) 6 out of 6 lines covered
Tag SUCCEED^%ut (100.00%) 6 out of 6 lines covered
Tag VERBOSE^%ut (100.00%) 10 out of 10 lines covered
Tag VERBOSE1^%ut (100.00%) 4 out of 4 lines covered
Tag ZHDIF^%ut (100.00%) 10 out of 10 lines covered
Routine %ut1 (82.16%) 221 out of 269 lines covered
- Detailed Breakdown
Tag %ut1^%ut1 (100.00%) 2 out of 2 lines covered
Tag ACTLINES^%ut1 (100.00%) 8 out of 8 lines covered
Tag CACHECOV^%ut1 (88.24%) 15 out of 17 lines covered
the following is a list of the lines **NOT** covered
CACHECOV+14 . . X "N %,%N S %N=0 X ""ZL @X F XCNP=XCNP+1:1 S %N=%N+1,%=$T
(+%N) Q:$L(%)=0 S @(DIF_XCNP_"""",0)"""")=%""" ; JLI see 160701 note in comment
s at top
CACHECOV+15 . . Q
Tag CHECKTAG^%ut1 (100.00%) 10 out of 10 lines covered
Tag CHEKTEST^%ut1 (100.00%) 9 out of 9 lines covered
Tag COV^%ut1 (51.39%) 37 out of 72 lines covered
the following is a list of the lines **NOT** covered
COV+35 . N NMSP S NMSP=$G(NMSPS)
COV+36 . D:NMSP]"" S NMSP="" F S NMSP=$O(NMSPS(NMSP)) Q:NMSP="" D
COV+37 . . S NMSP1=NMSP I NMSP["*" S NMSP1=$P(NMSP,"*")
COV+38 . . I $D(^$R(NMSP1)) S RTNS(NMSP1)=""
COV+39 . . I NMSP["*" S RTN=NMSP1 F S RTN=$O(^$R(RTN)) Q:RTN'[NMSP1 S R
TNS(RTN)=""
COV+40 . . Q
COV+41 . Q
COV+52 . K ^TMP("%utCOVCOHORTSAV",$J)
COV+53 . M ^TMP("%utCOVCOHORTSAV",$J)=^TMP("%utCOVCOHORT",$J)
COV+54 . K ^TMP("%utCOVRESULT",$J)
COV+55 . S ^TMP("%utcovrunning",$J)=1,%utcovxx=1
COV+57 . I ($$GETSYS^%ut()=47) VIEW "TRACE":1:$NA(^TMP("%utCOVRESULT",$J)
) ; GT.M START PROFILING
COV+60 . . N NMSP,NMSPV S NMSP="",NMSPV="" F S NMSPV=$O(RTNS(NMSPV)) Q:N
MSPV="" S NMSP=NMSP_NMSPV_","
COV+61 . . S NMSP=$E(NMSP,1,$L(NMSP)-1)
COV+62 . . S STATUS=##class(%Monitor.System.LineByLine).Start($lb(NMSP),$
lb("RtnLine"),$lb($j))
COV+63 . . I +STATUS'=1 D DecomposeStatus^%apiOBJ(STATUS,.ERR,"-d") F I=1
:1:ERR W ERR(I),!
COV+64 . . I +STATUS'=1 K ERR S EXIT=1
COV+65 . . Q
COV+79 . I ($$GETSYS^%ut()=0) ; CACHE SPECIFIC
COV+80 . K %utcovxx,^TMP("%utcovrunning",$J)
COV+81 . Q
COV+84 . I ($$GETSYS^%ut()=0) D ; CACHE SPECIFIC CODE
COV+85 . . S COVERSAV=$NA(^TMP("%utCOVCOHORTSAV",$J)) K @COVERSAV
COV+86 . . S COVER=$NA(^TMP("%utCOVCOHORT",$J)) K @COVER
COV+87 . . D CACHECOV(COVERSAV,COVER)
COV+88 . . D TOTAGS(COVERSAV,0),TOTAGS(COVER,1)
COV+89 . . D ##class(%Monitor.System.LineByLine).Stop()
COV+90 . . Q
COV+91 . D COVCOV($NA(^TMP("%utCOVCOHORT",$J)),$NA(^TMP("%utCOVRESULT",$J
))) ; Venn diagram matching between globals
COV+93 . I VERBOSITY=-1 D
COV+94 . . K ^TMP("%utCOVREPORT",$J)
COV+95 . . D COVRPTGL^%utcover($NA(^TMP("%utCOVCOHORTSAV",$J)),$NA(^TMP("
%utCOVCOHORT",$J)),$NA(^TMP("%utCOVRESULT",$J)),$NA(^TMP("%utCOVREPORT",$J)))
COV+96 . . Q
COV+97 . E D COVRPT($NA(^TMP("%utCOVCOHORTSAV",$J)),$NA(^TMP("%utCOVCOHO
RT",$J)),$NA(^TMP("%utCOVRESULT",$J)),VERBOSITY)
COV+98 . Q
Tag COVCOV^%ut1 (100.00%) 9 out of 9 lines covered
Tag COVRPT^%ut1 (100.00%) 5 out of 5 lines covered
Tag COVRPTLS^%ut1 (100.00%) 31 out of 31 lines covered
Tag FAIL^%ut1 (100.00%) 12 out of 12 lines covered
Tag GETTAG^%ut1 (100.00%) 4 out of 4 lines covered
Tag GETTREE^%ut1 (100.00%) 7 out of 7 lines covered
Tag GETVALS^%ut1 (0.00%) 0 out of 11 lines covered
the following is a list of the lines **NOT** covered
GETVALS+2 N LINE,MORE,ROUNAME,RSET,VAL,X
GETVALS+4 S RSET=##class(%ResultSet).%New("%Monitor.System.LineByLine:Res
ult")
GETVALS+5 S ROUNAME=##class(%Monitor.System.LineByLine).GetRoutineName(RO
UNUM)
GETVALS+6 S LINE=RSET.Execute(ROUNAME)
GETVALS+7 F LINE=1:1 S MORE=RSET.Next() Q:'MORE D
GETVALS+8 . S X=RSET.GetData(1)
GETVALS+9 . S VAL=$LI(X,MTRICNUM)
GETVALS+10 . S @GLOB@(ROUNAME,LINE,"C")=+VAL ; values are 0 if not seen,
otherwises positive number
GETVALS+11 . Q
GETVALS+12 D RSET.Close()
GETVALS+13 Q
Tag ISUTEST^%ut1 (100.00%) 1 out of 1 lines covered
Tag LINEDATA^%ut1 (100.00%) 9 out of 9 lines covered
Tag NEWSTYLE^%ut1 (100.00%) 4 out of 4 lines covered
Tag NVLDARG^%ut1 (100.00%) 11 out of 11 lines covered
Tag RESETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag RTNANAL^%ut1 (100.00%) 29 out of 29 lines covered
Tag SETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag TOTAGS^%ut1 (100.00%) 13 out of 13 lines covered
Tag UP^%ut1 (100.00%) 1 out of 1 lines covered
Routine %utcover (100.00%) 107 out of 107 lines covered
- Detailed Breakdown
Tag %utcover^%utcover (100.00%) 2 out of 2 lines covered
Tag CHKLEAKS^%utcover (100.00%) 13 out of 13 lines covered
Tag COVENTRY^%utcover (100.00%) 15 out of 15 lines covered
Tag COVERAGE^%utcover (100.00%) 13 out of 13 lines covered
Tag COVRPTGL^%utcover (100.00%) 14 out of 14 lines covered
Tag LIST^%utcover (100.00%) 38 out of 38 lines covered
Tag MULTAPIS^%utcover (100.00%) 5 out of 5 lines covered
Tag SETROUS^%utcover (100.00%) 4 out of 4 lines covered
Tag TRIMDATA^%utcover (100.00%) 3 out of 3 lines covered
Routine %ut (63.99%) 183 out of 286 lines covered
- Summary
Tag %ut^%ut (100.00%) 2 out of 2 lines covered
Tag CHKEQ^%ut (100.00%) 18 out of 18 lines covered
Tag CHKLEAKS^%ut (100.00%) 2 out of 2 lines covered
Tag CHKTF^%ut (100.00%) 15 out of 15 lines covered
Tag COV^%ut (100.00%) 2 out of 2 lines covered
Tag COVERAGE^%ut (100.00%) 2 out of 2 lines covered
Tag DOSET^%ut (0.00%) 0 out of 6 lines covered
Tag EN^%ut (100.00%) 6 out of 6 lines covered
Tag EN1^%ut (100.00%) 65 out of 65 lines covered
Tag ERROR^%ut (55.56%) 5 out of 9 lines covered
Tag ERROR1^%ut (100.00%) 9 out of 9 lines covered
Tag FAIL^%ut (100.00%) 2 out of 2 lines covered
Tag GETLIST^%ut (0.00%) 0 out of 11 lines covered
Tag GETSET^%ut (0.00%) 0 out of 4 lines covered
Tag GETSYS^%ut (100.00%) 3 out of 3 lines covered
Tag GETUTVAL^%ut (100.00%) 5 out of 5 lines covered
Tag GTMVER^%ut (100.00%) 1 out of 1 lines covered
Tag GUILOAD^%ut (0.00%) 0 out of 8 lines covered
Tag GUINEXT^%ut (0.00%) 0 out of 43 lines covered
Tag GUISET^%ut (0.00%) 0 out of 8 lines covered
Tag ISUTEST^%ut (100.00%) 1 out of 1 lines covered
Tag LOAD^%ut (0.00%) 0 out of 10 lines covered
Tag LSTUTVAL^%ut (100.00%) 4 out of 4 lines covered
Tag MULTAPIS^%ut (100.00%) 2 out of 2 lines covered
Tag PICKSET^%ut (100.00%) 3 out of 3 lines covered
Tag RUNSET^%ut (0.00%) 0 out of 9 lines covered
Tag SETUT^%ut (100.00%) 6 out of 6 lines covered
Tag SUCCEED^%ut (100.00%) 6 out of 6 lines covered
Tag VERBOSE^%ut (100.00%) 10 out of 10 lines covered
Tag VERBOSE1^%ut (100.00%) 4 out of 4 lines covered
Tag ZHDIF^%ut (100.00%) 10 out of 10 lines covered
Routine %ut1 (82.16%) 221 out of 269 lines covered
- Summary
Tag %ut1^%ut1 (100.00%) 2 out of 2 lines covered
Tag ACTLINES^%ut1 (100.00%) 8 out of 8 lines covered
Tag CACHECOV^%ut1 (88.24%) 15 out of 17 lines covered
Tag CHECKTAG^%ut1 (100.00%) 10 out of 10 lines covered
Tag CHEKTEST^%ut1 (100.00%) 9 out of 9 lines covered
Tag COV^%ut1 (51.39%) 37 out of 72 lines covered
Tag COVCOV^%ut1 (100.00%) 9 out of 9 lines covered
Tag COVRPT^%ut1 (100.00%) 5 out of 5 lines covered
Tag COVRPTLS^%ut1 (100.00%) 31 out of 31 lines covered
Tag FAIL^%ut1 (100.00%) 12 out of 12 lines covered
Tag GETTAG^%ut1 (100.00%) 4 out of 4 lines covered
Tag GETTREE^%ut1 (100.00%) 7 out of 7 lines covered
Tag GETVALS^%ut1 (0.00%) 0 out of 11 lines covered
Tag ISUTEST^%ut1 (100.00%) 1 out of 1 lines covered
Tag LINEDATA^%ut1 (100.00%) 9 out of 9 lines covered
Tag NEWSTYLE^%ut1 (100.00%) 4 out of 4 lines covered
Tag NVLDARG^%ut1 (100.00%) 11 out of 11 lines covered
Tag RESETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag RTNANAL^%ut1 (100.00%) 29 out of 29 lines covered
Tag SETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag TOTAGS^%ut1 (100.00%) 13 out of 13 lines covered
Tag UP^%ut1 (100.00%) 1 out of 1 lines covered
Routine %utcover (100.00%) 107 out of 107 lines covered
- Summary
Tag %utcover^%utcover (100.00%) 2 out of 2 lines covered
Tag CHKLEAKS^%utcover (100.00%) 13 out of 13 lines covered
Tag COVENTRY^%utcover (100.00%) 15 out of 15 lines covered
Tag COVERAGE^%utcover (100.00%) 13 out of 13 lines covered
Tag COVRPTGL^%utcover (100.00%) 14 out of 14 lines covered
Tag LIST^%utcover (100.00%) 38 out of 38 lines covered
Tag MULTAPIS^%utcover (100.00%) 5 out of 5 lines covered
Tag SETROUS^%utcover (100.00%) 4 out of 4 lines covered
Tag TRIMDATA^%utcover (100.00%) 3 out of 3 lines covered
Routine %ut (63.99%) 183 out of 286 lines covered
Routine %ut1 (82.16%) 221 out of 269 lines covered
Routine %utcover (100.00%) 107 out of 107 lines covered
Overall Analysis 511 out of 662 lines covered (77% coverage)
xxxxxxxxxxxxxxxxxxxx Finished in ENTRY^%uttcovr
------------------- RUNNING VERBOSE2^%utt6 -------------------
NOW RUNNING UNIT TESTS FOR %uttcovr
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...----------------------------------- [OK] 10ms
COVCOV - - check COVCOV - remove seen lines......------------------ [OK] 0ms
COVRPT...........------------------------------------------------- [OK] 20ms
COVRPTLS - - coverage report returning text in global...........-- [OK] 20ms
TRIMDATA - - TRIMDATA in %utcover..-------------------------------- [OK] 0ms
LIST - - LIST in %utcover............------------------------------ [OK] 0ms
CACHECOV - - set up routine for analysis in globals..------------- [OK] 30ms
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............--------------------------------------------- [OK] 0ms
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........---------------------- [OK] 10ms
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude...... [OK] 0ms
CHKCMDLN - check command line processing of %utt5------------------ [OK] 0ms
CHKGUI - check GUI processing of %utt5----------------------------- [OK] 0ms
CKGUISET - check list of tests returned by GUISET------------------ [OK] 0ms
NEWSTYLE - test return of valid new style or @TEST indicators...-- [OK] 10ms
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
------------------- RUNNING VERBOSE3^%utt6 -------------------
NOW RUNNING UNIT TESTS FOR %uttcovr
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...-------------------------------- [OK] 3.009ms
COVCOV - - check COVCOV - remove seen lines......--------------- [OK] 1.89ms
COVRPT...........--------------------------------------------- [OK] 15.144ms
COVRPTLS - - coverage report returning text in global...........[OK] 12.998ms
TRIMDATA - - TRIMDATA in %utcover..----------------------------- [OK] .548ms
LIST - - LIST in %utcover............-------------------------- [OK] 3.973ms
CACHECOV - - set up routine for analysis in globals..--------- [OK] 32.095ms
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............----------------------------------------- [OK] 1.217ms
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........-------------------- [OK] 2.78ms
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude......[OK] .592ms
CHKCMDLN - check command line processing of %utt5--------------- [OK] .098ms
CHKGUI - check GUI processing of %utt5-------------------------- [OK] .094ms
CKGUISET - check list of tests returned by GUISET--------------- [OK] .097ms
NEWSTYLE - test return of valid new style or @TEST indicators... [OK] 4.925ms
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
------------------- RUNNING VERBOSE^%utt1(3) -------------------
Running tests in VERBOSE mode with fractional millisecond timing
----------------------------------- %utt1 -----------------------------------
T1 - - Make sure Start-up Ran.---------------------------------- [OK] .218ms
T2 - - Make sure Set-up runs.----------------------------------- [OK] .233ms
T3 - - Make sure Teardown runs.--------------------------------- [OK] .248ms
T4 - Entry point using XTMENT.---------------------------------- [OK] .179ms
T5 - Error count check
T5^%utt1 - Error count check - This is an intentional failure.
.
T5^%utt1 - Error count check - Intentionally throwing a failure
.---------------------------------------------------------------- [FAIL] .45ms
T6 - Succeed Entry Point...-------------------------------------- [OK] .26ms
T7 - Make sure we write to principal even though we are on another device..[OK]
11.656ms
T8 - If IO starts with another device, write to that device as if it's the prici
pal device.---------------------------------------------------- [OK] 3.699ms
COVRPTGL - coverage report returning global....---------------- [OK] 8.436ms
----------------------------------- %utt2 -----------------------------------
T11 - An @TEST Entry point in Another Routine invoked through XTROU offsets.[OK]
.219ms
T12 - An XTENT offset entry point in Another Routine invoked through XTROU offse
ts.------------------------------------------------------------- [OK] .142ms
----------------------------------- %utt4 -----------------------------------
MAIN - - Test coverage calculations----------------------------- [OK] .122ms
----------------------------------- %utt5 -----------------------------------
NEWSTYLE - identify new style test indicator functionality.----- [OK] .176ms
OLDSTYLE - identify old style test indicator functionality..---- [OK] .36ms
OLDSTYL1 - identify old style test indicator 2.---------------- [OK] .205ms
BADCHKEQ - CHKEQ should fail on unequal value
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
---------------------------------------------------------------- [FAIL] .257ms
BADCHKTF - CHKTF should fail on false value
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
---------------------------------------------------------------- [FAIL] .187ms
BADERROR - throws an error on purpose
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
--------------------------------------------------------------- [FAIL] 6.834ms
CALLFAIL - called FAIL to test it
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
---------------------------------------------------------------- [FAIL] .248ms
LEAKSOK - check leaks should be ok------------------------------ [OK] .684ms
LEAKSBAD - check leaks with leak
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
---------------------------------------------------------------- [FAIL] .714ms
NVLDARG1 - check invalid arg in CHKEQ
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
---------------------------------------------------------------- [FAIL] .178ms
ISUTEST - check ISUTEST inside unit test.----------------------- [OK] .511ms
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude......[OK] .586ms
CHKCMDLN - check command line processing of %utt5--------------- [OK] .096ms
CHKGUI - check GUI processing of %utt5-------------------------- [OK] .105ms
CKGUISET - check list of tests returned by GUISET--------------- [OK] .126ms
NEWSTYLE - test return of valid new style or @TEST indicators... [OK] 9.789ms
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...-------------------------------- [OK] 3.721ms
COVCOV - - check COVCOV - remove seen lines......-------------- [OK] 2.196ms
COVRPT...........--------------------------------------------- [OK] 13.132ms
COVRPTLS - - coverage report returning text in global...........[OK] 15.645ms
TRIMDATA - - TRIMDATA in %utcover..----------------------------- [OK] .553ms
LIST - - LIST in %utcover............-------------------------- [OK] 3.638ms
CACHECOV - - set up routine for analysis in globals..--------- [OK] 28.912ms
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............----------------------------------------- [OK] 1.178ms
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........-------------------- [OK] 2.64ms
Ran 6 Routines, 37 Entry Tags
Checked 109 tests, with 7 failures and encountered 1 error.
------------------- RUNNING VERBOSE^%utt6 -------------------
NOW RUNNING UNIT TESTS FOR %uttcovr
---------------------------------- %uttcovr ----------------------------------
RTNANAL - - routine analysis...---------------------------------------- [OK]
COVCOV - - check COVCOV - remove seen lines......---------------------- [OK]
COVRPT...........------------------------------------------------------ [OK]
COVRPTLS - - coverage report returning text in global...........------- [OK]
TRIMDATA - - TRIMDATA in %utcover..------------------------------------ [OK]
LIST - - LIST in %utcover............---------------------------------- [OK]
CACHECOV - - set up routine for analysis in globals..------------------ [OK]
LINEDATA - - convert code line to based on tags and offset, and identify active
code lines............------------------------------------------------- [OK]
TOTAGS - - convert from lines of code by line number to lines ordered by tag, li
ne from tag, and only not covered...........--------------------------- [OK]
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
----------------------------------- %utt6 -----------------------------------
SETROUS - - generate array with indices of routines to exclude......--- [OK]
CHKCMDLN - check command line processing of %utt5---------------------- [OK]
CHKGUI - check GUI processing of %utt5--------------------------------- [OK]
CKGUISET - check list of tests returned by GUISET---------------------- [OK]
NEWSTYLE - test return of valid new style or @TEST indicators...------- [OK]
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
------------------- RUNNING ^%ut -------------------
NOW RUNNING UNIT TESTS FOR %uttcovr
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
.........
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
------------------- RUNNING ^%ut1 -------------------
NOW RUNNING UNIT TESTS FOR %uttcovr
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
.........
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
------------------- RUNNING ^%utcover -------------------
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
------------------- RUNNING ^%utt1 -------------------
Running tests in NON-VERBOSE mode
For Verbose mode use DO VERBOSE^%utt1(ARG) where ARG is an integer 1 to 3
ENTER RETURN TO CONTINUE: ....
T5^%utt1 - Error count check - This is an intentional failure.
.
T5^%utt1 - Error count check - Intentionally throwing a failure
.................
BADCHKEQ^%utt5 - CHKEQ should fail on unequal value - <4> vs <3> - SET UNEQUAL
ON PURPOSE - SHOULD FAIL
BADCHKTF^%utt5 - CHKTF should fail on false value - SET FALSE (0) ON PURPOSE -
SHOULD FAIL
BADERROR^%utt5 - throws an error on purpose - Error: 150372778,BADERROR+6^%utt5
,%GTM-E-EXPR, Expression expected but not found
CALLFAIL^%utt5 - called FAIL to test it - Called FAIL to test it
LEAKSBAD^%utt5 - check leaks with leak - LEAKSBAD TEST - X NOT SPECIFIED VARIABL
E LEAK: X
NVLDARG1^%utt5 - check invalid arg in CHKEQ - NO VALUES INPUT TO CHKEQ^%ut - no
evaluation possible
................................................................................
Ran 6 Routines, 37 Entry Tags
Checked 109 tests, with 7 failures and encountered 1 error.
------------------- RUNNING ^%utt6 -------------------
NOW RUNNING UNIT TESTS FOR %uttcovr
......................................................................
Ran 1 Routine, 9 Entry Tags
Checked 70 tests, with 0 failures and encountered 0 errors.
NOW RUNNING UNIT TESTS FOR %utt6
.........
Ran 1 Routine, 5 Entry Tags
Checked 9 tests, with 0 failures and encountered 0 errors.
------------ SUMMARY ------------
Ran 20 Routines, 122 Entry Tags
Checked 412 tests, with 14 failures and encountered 2 errors.
Routine %ut (63.99%) 183 out of 286 lines covered
- Detailed Breakdown
Tag %ut^%ut (100.00%) 2 out of 2 lines covered
Tag CHKEQ^%ut (100.00%) 18 out of 18 lines covered
Tag CHKLEAKS^%ut (100.00%) 2 out of 2 lines covered
Tag CHKTF^%ut (100.00%) 15 out of 15 lines covered
Tag COV^%ut (100.00%) 2 out of 2 lines covered
Tag COVERAGE^%ut (100.00%) 2 out of 2 lines covered
Tag DOSET^%ut (0.00%) 0 out of 6 lines covered
the following is a list of the lines **NOT** covered
DOSET+4 N %utROU,%utLIST
DOSET+5 I '$D(%utVERB) S %utVERB=0
DOSET+6 S %utLIST=0
DOSET+7 D GETSET($G(IEN),.%utROU,.%utLIST)
DOSET+8 I %utLIST>0 N IEN,%ut D SETUT,EN1(.%utROU,%utLIST)
DOSET+9 Q
Tag EN^%ut (100.00%) 6 out of 6 lines covered
Tag EN1^%ut (100.00%) 65 out of 65 lines covered
Tag ERROR^%ut (55.56%) 5 out of 9 lines covered
the following is a list of the lines **NOT** covered
ERROR+7 . S %ut("CNT")=%ut("CNT")+1
ERROR+8 . S %utERR=%utERR+1
ERROR+9 . S @%ut("RSLT")@(%ut("CNT"))=%ut("LOC")_XTGUISEP_"ERROR"_XTGUISE
P_$S($$GETSYS()=47:$ZS,1:$ZE)
ERROR+10 . Q
Tag ERROR1^%ut (100.00%) 9 out of 9 lines covered
Tag FAIL^%ut (100.00%) 2 out of 2 lines covered
Tag GETLIST^%ut (0.00%) 0 out of 11 lines covered
the following is a list of the lines **NOT** covered
GETLIST+1 N I,%utROUL,%utROUN,%ut,XTCOMNT,XTVALUE,%utCNT
GETLIST+2 S XTVALUE=$NA(^TMP("GUI-MUNIT",$J)) K @XTVALUE
GETLIST+3 S %utCNT=0,XTCOMNT=""
GETLIST+4 D GETTREE^%ut1(.%utROU,%utLIST)
GETLIST+5 F I=1:1 Q:'$D(%utROU(I)) S %utROUL(%utROU(I))=""
GETLIST+6 S %utROUN="" F S %utROUN=$O(%utROUL(%utROUN)) Q:%utROUN="" D
LOAD(%utROUN,.%utCNT,XTVALUE,XTCOMNT,.%utROUL)
GETLIST+7 M @%utRSLT=@XTVALUE
GETLIST+8 K @%utRSLT@("SHUTDOWN")
GETLIST+9 K @%utRSLT@("STARTUP")
GETLIST+10 S @XTVALUE@("LASTROU")=""
GETLIST+11 Q
Tag GETSET^%ut (0.00%) 0 out of 4 lines covered
the following is a list of the lines **NOT** covered
GETSET+1 N IENS,%utROOT
GETSET+3 S IENS=IEN_"," D GETS^DIQ(17.9001,IENS,"1*","","%utROOT")
GETSET+4 S %utLIST=0,IENS="" F S IENS=$O(%utROOT(17.90011,IENS)) Q:IENS=
"" S %utLIST=%utLIST+1,%utROU(%utLIST)=%utROOT(17.90011,IENS,.01)
GETSET+5 Q
Tag GETSYS^%ut (100.00%) 3 out of 3 lines covered
Tag GETUTVAL^%ut (100.00%) 5 out of 5 lines covered
Tag GTMVER^%ut (100.00%) 1 out of 1 lines covered
Tag GUILOAD^%ut (0.00%) 0 out of 8 lines covered
the following is a list of the lines **NOT** covered
GUILOAD+1 N %utROU,%ut
GUILOAD+2 D SETUT
GUILOAD+3 S %ut("RSLT")=$NA(^TMP("MUNIT-%utRSLT",$J)) K @%ut("RSLT")
GUILOAD+4 S %utROU(1)=%utROUN
GUILOAD+5 D GETLIST(.%utROU,1,%ut("RSLT"))
GUILOAD+6 S @%ut("RSLT")@(1)=(@%ut("RSLT")@(1))_"^1"
GUILOAD+7 S %utRSLT=%ut("RSLT")
GUILOAD+8 Q
Tag GUINEXT^%ut (0.00%) 0 out of 43 lines covered
the following is a list of the lines **NOT** covered
GUINEXT+5 N %utETRY,%utROUT,XTOLROU,XTVALUE,%utERR,%utGUI
GUINEXT+6 N %ut
GUINEXT+7 I $G(XTGUISEP)="" S XTGUISEP="^"
GUINEXT+8 D SETUT
GUINEXT+9 S %ut("LOC")=%utLOC
GUINEXT+10 S %ut("CURR")=0,%ut("ECNT")=0,%ut("FAIL")=0,%ut("CHK")=0,%ut("
NENT")=0,%ut("ERRN")=0
GUINEXT+11 S XTVALUE=$NA(^TMP("GUI-MUNIT",$J))
GUINEXT+12 S %ut("RSLT")=$NA(^TMP("GUINEXT",$J)) K @%ut("RSLT")
GUINEXT+13 S %utRSLT=%ut("RSLT")
GUINEXT+14 S %utETRY=$P(%utLOC,U),%utROUT=$P(%utLOC,U,2),XTOLROU=$G(@XTVA
LUE@("LASTROU"))
GUINEXT+15 S %utGUI=1
GUINEXT+16 S %ut("CHK")=0,%ut("CNT")=1,%utERR=0
GUINEXT+17 D I %utROUT="" S @%utRSLT@(1)="" Q ; 141018 JLI - Have to le
ave XTVALUE intact, in case they simply run again for STARTUP, etc.
GUINEXT+18 . I XTOLROU="",$D(@XTVALUE@("STARTUP")) D
GUINEXT+19 . . S %ut("LOC")=@XTVALUE@("STARTUP")
GUINEXT+20 . . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+21 . . D @(@XTVALUE@("STARTUP"))
GUINEXT+22 . . Q
GUINEXT+23 . S @XTVALUE@("LASTROU")=%utROUT I %utROUT'="",$T(@("SETUP^"_%
utROUT))'="" D
GUINEXT+24 . . S %ut("LOC")="SETUP^"_%utROUT
GUINEXT+25 . . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+26 . . D @("SETUP^"_%utROUT)
GUINEXT+27 . . Q
GUINEXT+28 . I %utROUT="",$D(@XTVALUE@("SHUTDOWN")) D
GUINEXT+29 . . S %ut("LOC")=@XTVALUE@("SHUTDOWN")
GUINEXT+30 . . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+31 . . D @(@XTVALUE@("SHUTDOWN"))
GUINEXT+32 . . Q
GUINEXT+33 . Q
GUINEXT+34 S %ut("LOC")=%utLOC
GUINEXT+35 S %ut("CHK")=0,%ut("CNT")=1,%utERR=0
GUINEXT+36 D ; to limit range of error trap so we continue through other
tests
GUINEXT+37 . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+38 . D @%ut("LOC")
GUINEXT+39 . Q
GUINEXT+40 I $T(@("TEARDOWN^"_%utROUT))'="" D
GUINEXT+41 . S %ut("LOC")="TEARDOWN^"_%utROUT
GUINEXT+42 . N $ETRAP S $ETRAP="D ERROR^%ut"
GUINEXT+43 . D @("TEARDOWN^"_%utROUT)
GUINEXT+44 . Q
GUINEXT+45 S @%ut("RSLT")@(1)=%ut("CHK")_XTGUISEP_(%ut("CNT")-1-%utERR)_X
TGUISEP_%utERR
GUINEXT+46 K ^TMP("%ut",$J,"UTVALS")
GUINEXT+47 Q
Tag GUISET^%ut (0.00%) 0 out of 8 lines covered
the following is a list of the lines **NOT** covered
GUISET+1 N %utROU,%utLIST,%ut
GUISET+2 D SETUT
GUISET+3 S %ut("RSLT")=$NA(^TMP("MUNIT-%utRSLT",$J)) K @%ut("RSLT")
GUISET+4 D GETSET(XTSET,.%utROU,.%utLIST)
GUISET+5 D GETLIST(.%utROU,%utLIST,%ut("RSLT"))
GUISET+6 S @%ut("RSLT")@(1)=(@%ut("RSLT")@(1))_"^1" ; 110719 mark as new
version
GUISET+7 S %utRSLT=%ut("RSLT")
GUISET+8 Q
Tag ISUTEST^%ut (100.00%) 1 out of 1 lines covered
Tag LOAD^%ut (0.00%) 0 out of 10 lines covered
the following is a list of the lines **NOT** covered
LOAD+1 I $T(@("^"_%utROUN))="" S %utNCNT=%utNCNT+1,@XTVALUE@(%utNCNT)=%ut
ROUN_"^^*** ERROR - ROUTINE NAME NOT FOUND" Q
LOAD+2 S %utNCNT=%utNCNT+1,@XTVALUE@(%utNCNT)=%utROUN_U_U_XTCOMNT
LOAD+3 N %utI,XTX1,XTX2,LINE,LIST,I
LOAD+4 I $T(@("STARTUP^"_%utROUN))'="",'$D(@XTVALUE@("STARTUP")) S @XTVAL
UE@("STARTUP")="STARTUP^"_%utROUN
LOAD+5 I $T(@("SHUTDOWN^"_%utROUN))'="",'$D(@XTVALUE@("SHUTDOWN")) S @XTV
ALUE@("SHUTDOWN")="SHUTDOWN^"_%utROUN
LOAD+6 D NEWSTYLE^%ut1(.LIST,%utROUN)
LOAD+7 F I=1:1:LIST S %utNCNT=%utNCNT+1,@XTVALUE@(%utNCNT)=%utROUN_U_LIST
(I)
LOAD+8 F %utI=1:1 S LINE=$T(@("XTENT+"_%utI_"^"_%utROUN)) S XTX1=$P(LINE,
";",3) Q:XTX1="" S XTX2=$P(LINE,";",4),%utNCNT=%utNCNT+1,@XTVALUE@(%utNCNT)=%ut
ROUN_U_XTX1_U_XTX2
LOAD+9 F %utI=1:1 S LINE=$T(@("XTROU+"_%utI_"^"_%utROUN)) S XTX1=$P(LINE,
";",3) Q:XTX1="" S XTCOMNT=$P(LINE,";",4) I '$D(%utROUL(XTX1)) S %utROUL(XTX1)=
"" D LOAD(XTX1,.%utNCNT,XTVALUE,XTCOMNT,.%utROUL)
LOAD+10 Q
Tag LSTUTVAL^%ut (100.00%) 4 out of 4 lines covered
Tag MULTAPIS^%ut (100.00%) 2 out of 2 lines covered
Tag PICKSET^%ut (100.00%) 3 out of 3 lines covered
Tag RUNSET^%ut (0.00%) 0 out of 9 lines covered
the following is a list of the lines **NOT** covered
RUNSET+1 N Y,%utROU,%utLIST,%utVERB
RUNSET+2 Q:$G(SETNAME)=""
RUNSET+3 S %utVERB=$G(VERBOSE,0)
RUNSET+4 S Y=+$$FIND1^DIC(17.9001,"","X",SETNAME) Q:Y'>0
RUNSET+5 D GETSET(Y,.%utROU,.%utLIST)
RUNSET+6 N Y,SETNAME,%ut
RUNSET+7 D SETUT
RUNSET+8 D EN1(.%utROU,%utLIST)
RUNSET+9 Q
Tag SETUT^%ut (100.00%) 6 out of 6 lines covered
Tag SUCCEED^%ut (100.00%) 6 out of 6 lines covered
Tag VERBOSE^%ut (100.00%) 10 out of 10 lines covered
Tag VERBOSE1^%ut (100.00%) 4 out of 4 lines covered
Tag ZHDIF^%ut (100.00%) 10 out of 10 lines covered
Routine %ut1 (82.16%) 221 out of 269 lines covered
- Detailed Breakdown
Tag %ut1^%ut1 (100.00%) 2 out of 2 lines covered
Tag ACTLINES^%ut1 (100.00%) 8 out of 8 lines covered
Tag CACHECOV^%ut1 (88.24%) 15 out of 17 lines covered
the following is a list of the lines **NOT** covered
CACHECOV+14 . . X "N %,%N S %N=0 X ""ZL @X F XCNP=XCNP+1:1 S %N=%N+1,%=$T
(+%N) Q:$L(%)=0 S @(DIF_XCNP_"""",0)"""")=%""" ; JLI see 160701 note in comment
s at top
CACHECOV+15 . . Q
Tag CHECKTAG^%ut1 (100.00%) 10 out of 10 lines covered
Tag CHEKTEST^%ut1 (100.00%) 9 out of 9 lines covered
Tag COV^%ut1 (51.39%) 37 out of 72 lines covered
the following is a list of the lines **NOT** covered
COV+35 . N NMSP S NMSP=$G(NMSPS)
COV+36 . D:NMSP]"" S NMSP="" F S NMSP=$O(NMSPS(NMSP)) Q:NMSP="" D
COV+37 . . S NMSP1=NMSP I NMSP["*" S NMSP1=$P(NMSP,"*")
COV+38 . . I $D(^$R(NMSP1)) S RTNS(NMSP1)=""
COV+39 . . I NMSP["*" S RTN=NMSP1 F S RTN=$O(^$R(RTN)) Q:RTN'[NMSP1 S R
TNS(RTN)=""
COV+40 . . Q
COV+41 . Q
COV+52 . K ^TMP("%utCOVCOHORTSAV",$J)
COV+53 . M ^TMP("%utCOVCOHORTSAV",$J)=^TMP("%utCOVCOHORT",$J)
COV+54 . K ^TMP("%utCOVRESULT",$J)
COV+55 . S ^TMP("%utcovrunning",$J)=1,%utcovxx=1
COV+57 . I ($$GETSYS^%ut()=47) VIEW "TRACE":1:$NA(^TMP("%utCOVRESULT",$J)
) ; GT.M START PROFILING
COV+60 . . N NMSP,NMSPV S NMSP="",NMSPV="" F S NMSPV=$O(RTNS(NMSPV)) Q:N
MSPV="" S NMSP=NMSP_NMSPV_","
COV+61 . . S NMSP=$E(NMSP,1,$L(NMSP)-1)
COV+62 . . S STATUS=##class(%Monitor.System.LineByLine).Start($lb(NMSP),$
lb("RtnLine"),$lb($j))
COV+63 . . I +STATUS'=1 D DecomposeStatus^%apiOBJ(STATUS,.ERR,"-d") F I=1
:1:ERR W ERR(I),!
COV+64 . . I +STATUS'=1 K ERR S EXIT=1
COV+65 . . Q
COV+79 . I ($$GETSYS^%ut()=0) ; CACHE SPECIFIC
COV+80 . K %utcovxx,^TMP("%utcovrunning",$J)
COV+81 . Q
COV+84 . I ($$GETSYS^%ut()=0) D ; CACHE SPECIFIC CODE
COV+85 . . S COVERSAV=$NA(^TMP("%utCOVCOHORTSAV",$J)) K @COVERSAV
COV+86 . . S COVER=$NA(^TMP("%utCOVCOHORT",$J)) K @COVER
COV+87 . . D CACHECOV(COVERSAV,COVER)
COV+88 . . D TOTAGS(COVERSAV,0),TOTAGS(COVER,1)
COV+89 . . D ##class(%Monitor.System.LineByLine).Stop()
COV+90 . . Q
COV+91 . D COVCOV($NA(^TMP("%utCOVCOHORT",$J)),$NA(^TMP("%utCOVRESULT",$J
))) ; Venn diagram matching between globals
COV+93 . I VERBOSITY=-1 D
COV+94 . . K ^TMP("%utCOVREPORT",$J)
COV+95 . . D COVRPTGL^%utcover($NA(^TMP("%utCOVCOHORTSAV",$J)),$NA(^TMP("
%utCOVCOHORT",$J)),$NA(^TMP("%utCOVRESULT",$J)),$NA(^TMP("%utCOVREPORT",$J)))
COV+96 . . Q
COV+97 . E D COVRPT($NA(^TMP("%utCOVCOHORTSAV",$J)),$NA(^TMP("%utCOVCOHO
RT",$J)),$NA(^TMP("%utCOVRESULT",$J)),VERBOSITY)
COV+98 . Q
Tag COVCOV^%ut1 (100.00%) 9 out of 9 lines covered
Tag COVRPT^%ut1 (100.00%) 5 out of 5 lines covered
Tag COVRPTLS^%ut1 (100.00%) 31 out of 31 lines covered
Tag FAIL^%ut1 (100.00%) 12 out of 12 lines covered
Tag GETTAG^%ut1 (100.00%) 4 out of 4 lines covered
Tag GETTREE^%ut1 (100.00%) 7 out of 7 lines covered
Tag GETVALS^%ut1 (0.00%) 0 out of 11 lines covered
the following is a list of the lines **NOT** covered
GETVALS+2 N LINE,MORE,ROUNAME,RSET,VAL,X
GETVALS+4 S RSET=##class(%ResultSet).%New("%Monitor.System.LineByLine:Res
ult")
GETVALS+5 S ROUNAME=##class(%Monitor.System.LineByLine).GetRoutineName(RO
UNUM)
GETVALS+6 S LINE=RSET.Execute(ROUNAME)
GETVALS+7 F LINE=1:1 S MORE=RSET.Next() Q:'MORE D
GETVALS+8 . S X=RSET.GetData(1)
GETVALS+9 . S VAL=$LI(X,MTRICNUM)
GETVALS+10 . S @GLOB@(ROUNAME,LINE,"C")=+VAL ; values are 0 if not seen,
otherwises positive number
GETVALS+11 . Q
GETVALS+12 D RSET.Close()
GETVALS+13 Q
Tag ISUTEST^%ut1 (100.00%) 1 out of 1 lines covered
Tag LINEDATA^%ut1 (100.00%) 9 out of 9 lines covered
Tag NEWSTYLE^%ut1 (100.00%) 4 out of 4 lines covered
Tag NVLDARG^%ut1 (100.00%) 11 out of 11 lines covered
Tag RESETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag RTNANAL^%ut1 (100.00%) 29 out of 29 lines covered
Tag SETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag TOTAGS^%ut1 (100.00%) 13 out of 13 lines covered
Tag UP^%ut1 (100.00%) 1 out of 1 lines covered
Routine %utcover (100.00%) 107 out of 107 lines covered
- Detailed Breakdown
Tag %utcover^%utcover (100.00%) 2 out of 2 lines covered
Tag CHKLEAKS^%utcover (100.00%) 13 out of 13 lines covered
Tag COVENTRY^%utcover (100.00%) 15 out of 15 lines covered
Tag COVERAGE^%utcover (100.00%) 13 out of 13 lines covered
Tag COVRPTGL^%utcover (100.00%) 14 out of 14 lines covered
Tag LIST^%utcover (100.00%) 38 out of 38 lines covered
Tag MULTAPIS^%utcover (100.00%) 5 out of 5 lines covered
Tag SETROUS^%utcover (100.00%) 4 out of 4 lines covered
Tag TRIMDATA^%utcover (100.00%) 3 out of 3 lines covered
Routine %ut (63.99%) 183 out of 286 lines covered
- Summary
Tag %ut^%ut (100.00%) 2 out of 2 lines covered
Tag CHKEQ^%ut (100.00%) 18 out of 18 lines covered
Tag CHKLEAKS^%ut (100.00%) 2 out of 2 lines covered
Tag CHKTF^%ut (100.00%) 15 out of 15 lines covered
Tag COV^%ut (100.00%) 2 out of 2 lines covered
Tag COVERAGE^%ut (100.00%) 2 out of 2 lines covered
Tag DOSET^%ut (0.00%) 0 out of 6 lines covered
Tag EN^%ut (100.00%) 6 out of 6 lines covered
Tag EN1^%ut (100.00%) 65 out of 65 lines covered
Tag ERROR^%ut (55.56%) 5 out of 9 lines covered
Tag ERROR1^%ut (100.00%) 9 out of 9 lines covered
Tag FAIL^%ut (100.00%) 2 out of 2 lines covered
Tag GETLIST^%ut (0.00%) 0 out of 11 lines covered
Tag GETSET^%ut (0.00%) 0 out of 4 lines covered
Tag GETSYS^%ut (100.00%) 3 out of 3 lines covered
Tag GETUTVAL^%ut (100.00%) 5 out of 5 lines covered
Tag GTMVER^%ut (100.00%) 1 out of 1 lines covered
Tag GUILOAD^%ut (0.00%) 0 out of 8 lines covered
Tag GUINEXT^%ut (0.00%) 0 out of 43 lines covered
Tag GUISET^%ut (0.00%) 0 out of 8 lines covered
Tag ISUTEST^%ut (100.00%) 1 out of 1 lines covered
Tag LOAD^%ut (0.00%) 0 out of 10 lines covered
Tag LSTUTVAL^%ut (100.00%) 4 out of 4 lines covered
Tag MULTAPIS^%ut (100.00%) 2 out of 2 lines covered
Tag PICKSET^%ut (100.00%) 3 out of 3 lines covered
Tag RUNSET^%ut (0.00%) 0 out of 9 lines covered
Tag SETUT^%ut (100.00%) 6 out of 6 lines covered
Tag SUCCEED^%ut (100.00%) 6 out of 6 lines covered
Tag VERBOSE^%ut (100.00%) 10 out of 10 lines covered
Tag VERBOSE1^%ut (100.00%) 4 out of 4 lines covered
Tag ZHDIF^%ut (100.00%) 10 out of 10 lines covered
Routine %ut1 (82.16%) 221 out of 269 lines covered
- Summary
Tag %ut1^%ut1 (100.00%) 2 out of 2 lines covered
Tag ACTLINES^%ut1 (100.00%) 8 out of 8 lines covered
Tag CACHECOV^%ut1 (88.24%) 15 out of 17 lines covered
Tag CHECKTAG^%ut1 (100.00%) 10 out of 10 lines covered
Tag CHEKTEST^%ut1 (100.00%) 9 out of 9 lines covered
Tag COV^%ut1 (51.39%) 37 out of 72 lines covered
Tag COVCOV^%ut1 (100.00%) 9 out of 9 lines covered
Tag COVRPT^%ut1 (100.00%) 5 out of 5 lines covered
Tag COVRPTLS^%ut1 (100.00%) 31 out of 31 lines covered
Tag FAIL^%ut1 (100.00%) 12 out of 12 lines covered
Tag GETTAG^%ut1 (100.00%) 4 out of 4 lines covered
Tag GETTREE^%ut1 (100.00%) 7 out of 7 lines covered
Tag GETVALS^%ut1 (0.00%) 0 out of 11 lines covered
Tag ISUTEST^%ut1 (100.00%) 1 out of 1 lines covered
Tag LINEDATA^%ut1 (100.00%) 9 out of 9 lines covered
Tag NEWSTYLE^%ut1 (100.00%) 4 out of 4 lines covered
Tag NVLDARG^%ut1 (100.00%) 11 out of 11 lines covered
Tag RESETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag RTNANAL^%ut1 (100.00%) 29 out of 29 lines covered
Tag SETIO^%ut1 (100.00%) 2 out of 2 lines covered
Tag TOTAGS^%ut1 (100.00%) 13 out of 13 lines covered
Tag UP^%ut1 (100.00%) 1 out of 1 lines covered
Routine %utcover (100.00%) 107 out of 107 lines covered
- Summary
Tag %utcover^%utcover (100.00%) 2 out of 2 lines covered
Tag CHKLEAKS^%utcover (100.00%) 13 out of 13 lines covered
Tag COVENTRY^%utcover (100.00%) 15 out of 15 lines covered
Tag COVERAGE^%utcover (100.00%) 13 out of 13 lines covered
Tag COVRPTGL^%utcover (100.00%) 14 out of 14 lines covered
Tag LIST^%utcover (100.00%) 38 out of 38 lines covered
Tag MULTAPIS^%utcover (100.00%) 5 out of 5 lines covered
Tag SETROUS^%utcover (100.00%) 4 out of 4 lines covered
Tag TRIMDATA^%utcover (100.00%) 3 out of 3 lines covered
Routine %ut (63.99%) 183 out of 286 lines covered
Routine %ut1 (82.16%) 221 out of 269 lines covered
Routine %utcover (100.00%) 107 out of 107 lines covered
Overall Analysis 511 out of 662 lines covered (77% coverage)
GTM>
Reference in New Issue View Git Blame Copy Permalink