VistA-FOIAVistA/r/IFCAP-PRC-PRX--PRCA--PRCN/PRCHCHK.m

163 lines
4.5 KiB
Mathematica

PRCHCHK ;WISC/DJM/DGL-IFCAP FILE COMPARE UTILITY ; 11/3/99 12:43pm
V ;;5.1;IFCAP;;Oct 20, 2000
;Per VHA Directive 10-93-142, this routine should not be modified.
;
;This routine compares the site's file 442.3 with DATA in PRCHCHK3.
;
;DATA is the information that will be compared with
;the GLOBAL nodes.
;
; All entries in DATA have one ";" in front.
;
; The DATA section is set up with two lines of information.
; The first line is the full NODE of the record.
; The second line is the data entered into the NODE. If there
; is no data for a NODE the second line will be empty. The second
; line will always be entered, even if it has no data.
;
; The terminator of DATA is always ";;END".
;
SETUP ; FLAG STATES
;
; FLAG=0 CONTINUE CHEKING.
; FLAG=1 STOP CHECKING, NODE DOESN'T MATCH DATA.
; FLAG=2 VERIFY THAT NO MORE NODES EXIST IN THE FILE.
; ";;END" FOUND.
;
N DIFROM,FLAG,ROOT,START,LOOP,POINT,ND,SEARCH,NODE,VALUE,DATA,ZZ,X,FN
N XMY,XMDUN,XMSUB,XMDUZ,XMTEXT,COUNT,FILE,CC,Y
S FLAG=0
S ROOT="^PRCD(442.3"
S START=0
;
CHECK ;Site file compared to national DATA
;
S LOOP=START
S POINT=2
S ND=0 ;ND=NODE or DATA
S SEARCH=ROOT_","
F S LOOP=$O(@(SEARCH_LOOP_")")) Q:LOOP="" Q:LOOP="AC" D Q:FLAG>0
. S NODE=$P($T(DATA+POINT+ND^PRCHCHK3),";",2,99)
. I NODE["END" D Q:FLAG>0
. . S NODE=$P(NODE,";",2,99)
. . I NODE=";;END" S FLAG=2 Q
. . I NODE[";" S FLAG=1 Q
. . Q
. I ND=0 D
. . S NODE=$P($T(DATA+POINT+ND^PRCHCHK3),";",2,99)
. . S VALUE=SEARCH_LOOP_",0)"
. . I NODE=VALUE D Q
. . . S ND=ND+1#2
. . . Q
. . S FLAG=1
. . Q
. I ND=1 D
. . S NODE=$P($T(DATA+POINT+ND^PRCHCHK3),";",2,99)
. . S DATA=@(SEARCH_LOOP_",0)")
. . I DATA=NODE D Q
. . . S ND=ND+1#2
. . . S POINT=POINT+2
. . . Q
. . S FLAG=1
. . Q
. Q
;
MESSAGE ;Determine results of comparison
;
I FLAG=2 D
. S LOOP=$O(@(SEARCH_LOOP_")")) Q:LOOP="" D
. . S FLAG=1
. Q
I FLAG=0,LOOP="" S FLAG=1
I FLAG=0,LOOP="AC" S FLAG=2
;
I FLAG=1 D ERROR
I FLAG=2 D OK
Q
;
OK ;Site's file conforms to standard (Modified for MailMan 7.1 *50)
;
K ZZ,XMY
X ^%ZOSF("UCI")
S FN=$P(ROOT,"(",2)
S ZZ(1)="File, "_FN_", has been checked by patch PRC*5*236 and"
S ZZ(2)="has been found to conform to the national standard."
S ZZ(3)=" "
S ZZ(4)="No further action is required by your SITE."
S ZZ(5)=" "
S ZZ(6)="SITE: "_$G(^DD("SITE"))
S ZZ(7)="UCI: "_Y
S XMY("I:G.STATUS UPDATES@FORUM.VA.GOV")=""
S XMY("I:G.IRM")=""
S XMY(DUZ)=""
S XMDUN="IFCAP File Checker"
S XMSUB="OK File "_FN_" at "_$G(^DD("SITE"))
S XMDUZ="IFCAP File Checker"
S XMBODY="ZZ"
D SENDMSG^XMXAPI(DUZ,XMSUB,XMBODY,.XMY)
Q
;
ERROR ;Site's file does NOT conform to standard (Modified for MailMan 7.1 *50)
;Send notification of error to IRM and Status Updates
K ZZ,XMY
S FN=$P(ROOT,"(",2)
X ^%ZOSF("UCI")
S ZZ(1)="A discrepancy was noted in your data by patch PRC*5*236 in file "_FN_"."
S ZZ(2)="Both the data and the data dictionary for file "_FN_" were"
S ZZ(3)="sent to 'G.STATUS UPDATES' at FORUM."
S ZZ(4)=" "
S ZZ(5)="The Washington CIOFO will review the data."
S ZZ(6)=" "
S ZZ(7)="There is no action required of your SITE at this time."
S ZZ(8)=" "
S ZZ(9)="SITE: "_$G(^DD("SITE"))
S ZZ(10)="UCI: "_Y
S XMDUN="IFCAP File Checker"
S XMSUB="Problem in File "_FN
S XMDUZ="IFCAP File Checker"
S XMBODY="ZZ"
S XMY(DUZ)=""
S XMY("I:G.STATUS UPDATES@FORUM.VA.GOV")=""
S XMY("I:G.IRM")=""
D SENDMSG^XMXAPI(DUZ,XMSUB,XMBODY,.XMY)
;
;Send the 'DD' and the data from FILE 442.3 to 'G.STATUS UPDATES'
K ZZ,XMY
X ^%ZOSF("UCI")
S ZZ(1)="This file, "_FN_", does not match the data sent in patch PRC*5*236."
S ZZ(2)=" "
S ZZ(3)="SITE: "_$G(^DD("SITE"))
S ZZ(4)="UCI: "_Y
S ZZ(5)=" "
S XMDUN="IFCAP File Checker"
S XMSUB="Problem in File "_FN_" "_$G(^DD("SITE"))
S XMDUZ="IFCAP File Checker"
S XMBODY="ZZ"
S XMY("I:G.STATUS UPDATES@FORUM.VA.GOV")=""
;
;Load DD for file 442.3 into message array
S COUNT=6
S ZZ(COUNT)="DD FOR FILE 442.3"
S COUNT=COUNT+1
S FILE="^DD(442.3)"
F S FILE=$Q(@FILE) Q:FILE="" Q:$P($P(FILE,"(",2),",",1)>FN D
. S ZZ(COUNT)=FILE_" = "_@FILE
. S COUNT=COUNT+1
. Q
;
;Put space between DD and data
F CC=1:1:3 S ZZ(COUNT)=" ",COUNT=COUNT+1
S ZZ(COUNT)="DATA FROM FILE 442.3"
S COUNT=COUNT+1
;
;Load data from file 442.3 into message array
S FILE="^PRCD(442.3)"
F S FILE=$Q(@FILE) Q:FILE="" Q:$P($P(FILE,"(",2),",",1)>FN D
. S ZZ(COUNT)=FILE_" = "_@FILE
. S COUNT=COUNT+1
. Q
;
;Send completed message
D SENDMSG^XMXAPI(DUZ,XMSUB,XMBODY,.XMY)
Q