VistA-WorldVistAEHR/r/SCHEDULING-SD-SC/SCDXMSG.m

171 lines
6.9 KiB
Mathematica

SCDXMSG ;ALB/JRP - AMB CARE TRANSMISSION BUILDER;06-MAY-1996 ; 12/20/01 4:46pm
;;5.3;Scheduling;**44,56,70,77,85,96,121,128,66,247,245,387,466**;AUG 13, 1993;Build 2
;
SNDZ00 ;Main entry point for the sending of ADT-Z00 batch messages to
; the National Patient Care Database
;
;Input : None
;Output : None
;
SD70 ; added w/ patch SD*5.3*70 to reset transmit flags if needed
N SDEND,SDSTA D EN^SCDXUTL5
;
;Declare variables
N X,X1,X2,%H
N XMITPTR,NOACKBY,XMITDATE,SCDXEVNT,MAXBATCH,MAXLINE,BATCHCNT,MSGNUM
N LINECNT,MSHLINE,XMITLIST,XMITERR,HL7XMIT,ERROR,IPCNT
N HLEID,HL,HLECH,HLFS,HLQ,HLMID,HLMTIEN,HLDT,HLDT1,MSGID,HLRESLT,HLP
;Set message count limit for batch message
S MAXBATCH=100
;Set line count limit for batch message Note max 160K char. MM Message
S MAXLINE=$P($G(^SD(404.91,1,"AMB")),U,8) S:'MAXLINE MAXLINE=2000
;Initialize global locations
S XMITERR="^TMP(""SCDX-XMIT-BLD"","_$J_",""ERRORS"")"
S HL7XMIT="^TMP(""HLS"","_$J_")"
K @XMITERR,@HL7XMIT
;Get lag time for acks from NPCDB (default to T-LAG)
S NOACKBY=+$P($G(^SD(404.91,1,"AMB")),"^",4)
S:('NOACKBY) NOACKBY=2
;Determine T-LAG @ 11:59:59 PM
S X1=$$DT^XLFDT()
S X2=0-NOACKBY
S NOACKBY=$$FMADD^XLFDT(X1,X2)_".235959"
;Flag transmissions that haven't been acked by T-LAG for retransmission
S XMITDATE=""
F S XMITDATE=+$O(^SD(409.73,"AACNOACK",XMITDATE)) Q:(('XMITDATE)!(XMITDATE>NOACKBY)) D
.S XMITPTR=""
.F S XMITPTR=+$O(^SD(409.73,"AACNOACK",XMITDATE,XMITPTR)) Q:('XMITPTR) D
..;Mark entry with retransmit event (POSTMASTER is causer of event)
..D STREEVNT^SCDXFU01(XMITPTR,0,"",.5)
..;Can no longer receive database credit - delete x-ref and quit
..I +$$XMIT4DBC^SCDXFU04(XMITPTR)>3 K ^SD(409.73,"AACNOACK",XMITDATE,XMITPTR) Q ;SD*5.3*247
..;Turn transmission flag on
..D XMITFLAG^SCDXFU01(XMITPTR)
;Get pointer to sending event
S HLEID=+$O(^ORD(101,"B","SCDX AMBCARE SEND SERVER FOR ADT-Z00",0))
;Sending event not found - send error bulletin - done
I ('HLEID) D ERRBULL^SCDXMSG2("Unable to initialize HL7 variables - protocol not found") Q
;Initialze HL7 variables
D INIT^HLFNC2(HLEID,.HL)
;Unable to initialize HL7 variables - send error bulletin - done
I ($O(HL(""))="") D ERRBULL^SCDXMSG2($P(HL,"^",2)) Q
;Create batch message
D CREATE^HLTF(.HLMID,.HLMTIEN,.HLDT,.HLDT1)
;Unable to create batch message - send error bulletin - done
I ('HLMTIEN) D ERRBULL^SCDXMSG2("Unable to create batch HL7 message") Q
;Initialize message count
S BATCHCNT=0,IPCNT=0
;Initialize message number
S MSGNUM=1
;Initialize line count
S LINECNT=1
N VALER,VALERR
;this global contains the validation errors if any.
S VALER="^TMP(""SCDXVALID"",$J)"
;Loop through list of [deleted] encounters requiring transmission
S SCDXEVNT=""
F S SCDXEVNT=+$O(^SD(409.73,"AACXMIT",SCDXEVNT)) Q:('SCDXEVNT) D
.S XMITPTR=""
.F S XMITPTR=+$O(^SD(409.73,"AACXMIT",SCDXEVNT,XMITPTR)) Q:('XMITPTR) D
..N OENODE,PARENT,FILERR
..S VALERR="^TMP(""SCDXVALID"",$J,"_XMITPTR_")"
..;Bad entry in cross reference - delete cross reference and quit
..I ('$D(^SD(409.73,XMITPTR))) K ^SD(409.73,"AACXMIT",SCDXEVNT,XMITPTR) Q
..;Make sure entry points to an existing encounter - delete entry
..; and quit if it doesn't
..S X=^SD(409.73,XMITPTR,0)
..S X1=+$P(X,"^",2)
..S X2=+$P(X,"^",3)
..S OENODE=$S($G(^SCE(+X1,0)):^(0),1:$G(^SD(409.74,+X2,1))),PARENT=$P(OENODE,"^",6)
..I (((X1)&('$D(^SCE(X1))))!((X2)&('$D(^SD(409.74,X2))))) S ERROR=$$DELXMIT^SCDXFU03(XMITPTR) Q
..; if SD*5.3*70 cleanup not complete, recheck date of encounter for range
..I $G(SDEND) Q:$$CHKD(X1,X2)
..;If inpatient appointment, delete entry and quit
..;Commented to allow transmission of inpatient to NPCD; SD*5.3*387
..;I ($$INPATENC^SCDXUTL(XMITPTR)) S ERROR=$$DELXMIT^SCDXFU03(XMITPTR) Q
..;If test patient, delete entry and quit
..I $$TESTPAT^VADPT($P($$EZN4XMIT^SCDXFU11(XMITPTR),"^",2)) S ERROR=$$DELXMIT^SCDXFU03(XMITPTR) Q
..;If child encounter, delete entry, flag parent for xmit, and quit
..I PARENT D Q
...S ERROR=$$DELXMIT^SCDXFU03(XMITPTR)
..;NPCD will not accept for database credit - clean up and quit
..I +$$XMIT4DBC^SCDXFU04(XMITPTR)>3 D Q ;SD*5.3*247
...;Past database close-out date - delete previously reported errors
...D DELAERR^SCDXFU02(XMITPTR)
...;Turn off transmission flag
...D XMITFLAG^SCDXFU01(XMITPTR,1)
..;Calculate message control ID
..S MSGID=HLMID_"-"_MSGNUM
..;Put [deleted] encounter into transmission
..S ERROR=$$BUILDHL7^SCDXMSG0(XMITPTR,.HL,MSGID,HL7XMIT,LINECNT,VALERR)
..;[Deleted] encounter not added to transmission
..I ERROR<0,$O(@VALERR@(0))']"" D VALIDATE^SCMSVUT0("INTERNAL","","V900",VALERR,0)
..D DELAERR^SCDXFU02(XMITPTR,0)
..I $O(@VALERR@(0))]"" S FILERR=$$FILEVERR^SCMSVUT2(XMITPTR,VALERR)
..I ERROR<0 Q
..;Increment line count
..S LINECNT=LINECNT+ERROR
..;Increment message count
..S BATCHCNT=BATCHCNT+1
..;Increment message number
..S MSGNUM=MSGNUM+1
..;Increment inpatient count
..I $$INPATENC^SCDXUTL(XMITPTR) S IPCNT=IPCNT+1
..;Create entry in ACRP Transmission History file (#409.77)
..S X=$$CRTHIST^SCDXFU10(XMITPTR,HLDT,MSGID,HLMID)
..;Update transmission info for [deleted] encounter
..D XMITDATA^SCDXFU03(XMITPTR,HLDT,MSGID,HLMID)
..;Turn off transmission flag for [deleted] encounter
..D XMITFLAG^SCDXFU01(XMITPTR,1)
..;Delete all errors previously reported for [deleted] encounter
..D DELAERR^SCDXFU02(XMITPTR)
..;Reached max size for batch
..I ((MSGNUM>MAXBATCH)!(LINECNT>MAXLINE)) D
...;Send batch message - immediate priority
...S HLP("PRIORITY")="I"
...D GENERATE^HLMA(HLEID,"GB",1,.HLRESLT,HLMTIEN,.HLP)
...;Re-initialize HL7 message
...K @HL7XMIT
...;Re-initialize HL7 variables
...K HL,HLRESLT,HLP,HLMID,HLMTIEN,HLDT,HLDT1
...S HLEID=+$O(^ORD(101,"B","SCDX AMBCARE SEND SERVER FOR ADT-Z00",0))
...D INIT^HLFNC2(HLEID,.HL)
...;Create new batch message
...D CREATE^HLTF(.HLMID,.HLMTIEN,.HLDT,.HLDT1)
...;Re-initialize line count
...S LINECNT=1
...;Re-initialize message number
...S MSGNUM=1
;Check for unsent batch message
I ($O(@HL7XMIT@(0))) D
.;Send batch message - immediate priority
.S HLP("PRIORITY")="I"
.D GENERATE^HLMA(HLEID,"GB",1,.HLRESLT,HLMTIEN,.HLP)
N ERRCNT,IPERR
S ERRCNT=$$COUNT^SCMSVUT2(VALER)
S IPERR=$$IPERR^SCMSVUT2(VALER)
;Send completion bulletin
D CMPLBULL^SCDXMSG2(BATCHCNT,ERRCNT,IPCNT,IPERR)
;Clean up global arrays used
K @XMITERR,@HL7XMIT,@VALER
;Determine if updating of Hospital Location file hasn't completed AND
; if today is past the OPC to HL7 cut over date
I ('$P($G(^SD(404.91,1,"AMB")),"^",7)) I ($$DATE^SCDXUTL(DT)) D
.;Task updating of Hospital Location file
.N ZTRTN,ZTDESC,ZTDTH,ZTIO,ZTSK
.S ZTRTN="HOPUP^SCMSP"
.S ZTDESC="REQUIRE PROVIDER AND DIAGNOSIS FOR CHECKOUT FROM CLINICS"
.S ZTDTH="NOW"
.S ZTIO=""
.D ^%ZTLOAD
;Done
Q
;
CHKD(X1,X2) ; if clean-up still in progress for SD*5.3*70, check date
N SDELE
I X1,+$G(^SCE(X1,0))>SDEND Q 1
I X2 S SDELE=+$G(^SD(409.74,X2,1)) I SDELE>SDSTA D:SDELE<SDEND Q 1
. D KILL^SCDXUTL5("^SD(409.74,",X2)
. D KILL^SCDXUTL5("^SD(409.73,",XMITPTR)
Q 0