VistA-internationalization/TranslationSpreadsheets/WV-DIALOG-0012.txt

308 lines
9.0 KiB
Plaintext

English French Notes Complete/Exclude
Do you want to delete
FOR_FMT^1^1
You must specify some fields into which to import data.
FLD_DLM
Enter the name of the host file that contains the data to be imported.
These are the files in the
You must choose a file before you can go to the Field Selection page.
FLD_DEL
You have specified a fixed length format for imported data.
However, you have not entered field lengths for fields you have chosen.
So, you must either delete all the fields entered so far
or change the format to one that is not fixed length.
Do you want to store the selected fields in an Import Template
Do you want to proceed with the import
If you answer 'YES', the import will occur now.
If you answer 'NO', you will need to respecify the import criteria.
Okay, you can do the import later.
Following error messages were generated when import failed.
Enter name for your import template. It should be 3-30 characters and it should not start with a punctuation character
Name of Import Template:
Are you adding '
' as a new Import Template
An error occurred during the filing of the import template.
No import template will be created.
Import Template
already exists.
Existing Import Template
has been deleted.
Choose another template name.
Do you want to replace the existing template with a new one
If you answer 'YES', the existing template will be deleted.
This routine will report any sort templates that have been corrupted due to
a bug in FM21 that has been repaired by patch DI*21*9.
If any templates are reported here, you can repair them by editing the template,
without changing any of the sort fields.
If none show on the report, it means that none of the templates on your system
needed to be edited.
Report corrupted sort templates
Searching Sort Template file...please wait
Report of templates that need to be repaired
No.
END_IXVALUES
BEGIN_IXVALUES
BEGIN_IENs
END_IENs
IXCNT=
BEGIN_IDVALUES
END_IDVALUES
BEGIN_WIDVALUES
END_WIDVALUES
WORD-PROCESSING
IENs
No editing allowed.
You cannot save changes at this level.
To close the current page, press <PF1>C.
This is a required
Another entry already exists with this key value.
DA,DDS1ND)
No jumping allowed.
No exit allowed, since navigation for the block is disabled.
not found.
is uneditable.
DIR(
Closing page...
Since navigation for the block is disabled, that key sequence is disabled.
Filing form
DA,DDSND)
DA,DDSOND)
Please wait. Loading all pages ...
Verifying ...
Subfile:
Record:
Key Field(s):
Press RETURN to continue:
DONE!
CLONE FORM FROM
Select FORM to clone:
There are no blocks on this form.
BLOCKS USED ON FORM
Entry Number Block Name
The new form and blocks must be given unique names.
Give the new form and blocks the same names as the original,
but a different namespace
Answer 'YES' if the original form and blocks are namespaced, and you want
the new forms and blocks to have a different namespace.
Original namespace:
Enter the namespace of the original form and blocks
New namespace:
Enter the namespace of the new form and blocks
Enter names for the new form and blocks.
Original form name:
New form name:
Enter the name of the new form.
Invalid name.
Form with this name already exists.
Original block name:
New block name:
Block with this name already exists.
Creating new blocks ...
Attempt to create block
Creating new form ...
Attempt to create form
Repointing to new blocks ...
Reindexing new form ...
Ready to clone form
Enter 'Y' to clone form. Enter 'N' to exit.
Close Refresh
Close
;n:NEXT PAGE
Exit
Save
Next Page
COMMAND:
Enter a command or '^' followed by a caption to jump to a specific field.
DDSE(
FO(
There are no unused blocks associated with this file.
PURGE UNUSED BLOCKS FROM
Enter 'Y' to delete, 'N' to keep.
Delete (Y/N)?
Deleting block
Delete all unused blocks without prompting (Y/N)?
Enter 'Y' to delete unused blocks from the BLOCK file
without confirmation.
Enter 'N' to confirm each delete.
Continue (Y/N)?
Enter 'Y' to delete form. Enter 'N' to exit.
UNUSED BLOCKS
ASSOCIATED WITH FILE
Deleting the FORMS...
Deleting the BLOCKS...
Block
was deleted from the Block file.
I'm deleting pointers to that block from
Form
The above form(s) need to be redesigned.
Deleting form
DELETE FORM FROM
Select FORM to delete:
Delete all deletable blocks used on form
from the BLOCK file (Y/N)?
Enter 'Y' to delete blocks used on form
from the BLOCK file.
(Only blocks not used on other forms can be deleted.)
Enter 'N' to delete the form but not the blocks.
Delete blocks without prompting (Y/N)?
Enter 'Y' to delete blocks from the BLOCK file
Used on
Other Forms? Deletable?
PRIMARY FILE
DDO,bk#,pg#
with caption or unique name
SCREENMAN OPTION^1.01
Report of Form
DDSFORM(0)
PRIMARY FILE:
READ ACCESS:
DATE CREATED:
WRITE ACCESS:
DATE LAST USED:
CREATOR:
RECORD SELECTION PAGE:
PRE ACTION:
POST ACTION:
POST SAVE:
DATA VALIDATION:
FORM LISTING -
FILE:
Start each page of the form on a new page
Page Page
Number Properties
HEADER BLOCK:
PAGE COORDINATE:
IS THIS A POP UP PAGE?:
LOWER RIGHT COORDINATE:
NEXT PAGE:
PREVIOUS PAGE:
PARENT FIELD:
Block Block
Order Properties (Form File)
TYPE OF BLOCK:
BLOCK COORDINATE:
POINTER LINK:
REPLICATION:
INDEX:
INITIAL POSITION:
DISALLOW LAYGO
FIELD FOR SELECTION:
Block Properties (Block File)
Header Block Properties
DATA DICTIONARY NUMBER:
DISABLE NAVIGATION:
Field Field
Order Properties
FIELD TYPE:
CAPTION:
EXECUTABLE CAPTION:
DISPLAY GROUP:
UNIQUE NAME:
FIELD:
COMPUTED EXPRESSION:
READ TYPE:
PARAMETERS:
QUALIFIERS:
HELP:
INPUT TRANSFORM:
SAVE CODE:
SCREEN:
CAPTION COORDINATE:
DATA COORDINATE:
DATA LENGTH:
SUPPRESS COLON:
DEFAULT:
EXECUTABLE DEFAULT:
REQUIRED:
DISABLE EDITING:
RIGHT JUSTIFY:
DISALLOW LAYGO:
SUB PAGE LINK:
BRANCHING LOGIC:
POST ACTION ON CHANGE:
READ TYPE
form-only field in the BLOCK
IX(
NOTE: You must Save or Discard all edits to the
previous record before editing the next record.
Save, Discard, or Return (S/D/R)
Enter 'S' to save or 'D' to discard.
Enter 'R' or '^' to return to previous record.
RUN FORM FROM
Enter number of first page:
YyNn^
Yy
'^' TO STOP:
DA,ND)
DD or caption-only
FIELD multiple of the BLOCK
DD, computed, or caption-only
WARNING: This field is uneditable.
Any changes made in the editor will not be saved.
Press RETURN to enter editor:
Press 'RETURN' to edit this word processing field.
Compiling
Compiling all forms ...
Deleting compiled form data ...
Ffile#
DDSRNAV(
DDSN(
DATA DICTIONARY UTILITY OPTION^1.01
Check the Data Dictionary.
Remove erroneous nodes
This routine will try to fix certain nodes that are erroneous and may set some nodes to a file referenced by the selected file.
Say 'NO' here to leave the DD untouched. It will only flag the ones it finds erroneous.
Checking file #
You don't have DD access to this file. No fixing will be done on this file.
is missing zero node of DD.
Checking 'ID' nodes for 'Q'.
Checking 'IX' nodes.
Checking 'PT' nodes.
has duplicate 'NM' nodes.
'ID' node for field
Cross-reference logic is missing for
is not a pointer.
is not a pointer to file
Duplicate
node was deleted.
is missing.
) was killed.
Checking FIELDs
is missing its zero node. Nothing done.
doesn't have the correct protection for a field with executable code.
was set.
points to missing file:
is missing its 'PT' node in the pointed-to-file.
missing subfile:
Bad 'UP' pointer in subfile #
Checking subfile #
Returning to
triggers missing file
triggers missing field
in file
5 node is missing.
FILE (#.01) for
NAME for
ROOT FILE for
ORDER NUMBER of Cross-Reference Value #
FILE for
AC index (In: DDUCFI = file; DDUCFIX = flag to fix)
set to
ROOT TYPE for
set to 'INDEX FILE'.
ORDER NUMBER for Cross-Reference Value #
set to '
was killed.
was set
Checking Indexes.
Nothing done.
FILE does not equal ROOT FILE in
. Nothing done.
File #
referenced in
#################### #################### ####################
#################### #################### ####################
#################### #################### ####################
#################### #################### ####################
#################### #################### ####################