fis-gtm/sr_port/gvcst_put.c

2596 lines
109 KiB
C
Raw Normal View History

/****************************************************************
* *
* Copyright 2001, 2012 Fidelity Information Services, Inc *
* *
* This source code contains the intellectual property *
* of its copyright holder(s), and is made available *
* under a license. If you do not know the terms of *
* the license, please stop and do not read further. *
* *
****************************************************************/
#include "mdef.h"
#include <stddef.h>
#include "gtm_stdio.h"
#include "gtm_stdlib.h"
#include "gtm_string.h"
#include "gtm_inet.h" /* Required for gtmsource.h */
#ifdef VMS
#include <descrip.h> /* Required for gtmsource.h */
#endif
#include "gdsroot.h"
#include "gdskill.h"
#include "gdsblk.h"
#include "gtm_facility.h"
#include "fileinfo.h"
#include "gdsbt.h"
#include "gdsfhead.h"
#include "filestruct.h"
#include "cdb_sc.h"
#include "min_max.h" /* needed for gdsblkops.h */
#include "gdsblkops.h"
#include "jnl.h"
#include "gdscc.h"
#include "copy.h"
#include "buddy_list.h" /* needed for tp.h */
#include "hashtab_int4.h" /* needed for tp.h */
#include "tp.h"
#include "rc_oflow.h"
#include "repl_msg.h"
#include "gtmsource.h"
#include <rtnhdr.h>
#include "stack_frame.h"
#include "mv_stent.h"
#ifdef GTM_TRIGGER
# include "gv_trigger.h"
# include "gtm_trigger.h"
# include "gv_trigger_protos.h"
# include "subscript.h"
# include "stringpool.h"
#endif
#include "tp_frame.h"
#include "tp_restart.h"
/* Include prototypes */
#include "t_write.h"
#include "t_write_root.h"
#include "t_end.h"
#include "t_retry.h"
#include "t_begin.h"
#include "t_create.h"
#include "gvcst_blk_build.h"
#include "gvcst_expand_key.h"
#include "gvcst_protos.h" /* for gvcst_search,gvcst_search_blk,gvcst_put prototype */
#include "op.h" /* for op_add & op_tstart prototype */
#include "format_targ_key.h" /* for format_targ_key prototype */
#include "gvsub2str.h" /* for gvsub2str prototype */
#include "tp_set_sgm.h" /* for tp_set_sgm prototype */
#include "op_tcommit.h" /* for op_tcommit prototype */
#include "have_crit.h"
#include "error.h"
#include "gtmimagename.h" /* for spanning nodes */
#ifdef UNIX
#include "preemptive_ch.h"
#endif
#ifdef GTM_TRIGGER
LITREF mval literal_null;
LITREF mval literal_one;
LITREF mval literal_zero;
#endif
LITREF mval literal_batch;
LITREF mstr nsb_dummy;
/* Globals that will not change in value across nested trigger calls of gvcst_put OR even if they might change in value,
* the change is such that they dont need save/restore logic surrounding the "gtm_trigger" call. Any new GBLREFs that are
* added in this module need to be examined for interference between gvcst_put and nested trigger call and any save/restore
* logic (if needed) should be appropriately added surrounding the "gtm_trigger" invocation.
*/
GBLREF boolean_t gvdupsetnoop; /* if TRUE, duplicate SETs update journal but not database (except for curr_tn++) */
GBLREF boolean_t horiz_growth;
GBLREF boolean_t in_gvcst_incr;
GBLREF char *update_array, *update_array_ptr;
GBLREF gv_key *gv_altkey;
GBLREF gv_namehead *reset_gv_target;
GBLREF inctn_opcode_t inctn_opcode;
GBLREF int gv_fillfactor;
GBLREF int rc_set_fragment; /* Contains offset within data at which data fragment starts */
GBLREF int4 gv_keysize;
GBLREF int4 prev_first_off, prev_next_off;
GBLREF uint4 update_trans;
GBLREF jnl_format_buffer *non_tp_jfb_ptr;
GBLREF jnl_gbls_t jgbl;
GBLREF jnlpool_addrs jnlpool;
GBLREF uint4 dollar_tlevel;
GBLREF uint4 process_id;
GBLREF uint4 update_array_size, cumul_update_array_size; /* the current total size of the update array */
GBLREF unsigned char t_fail_hist[CDB_MAX_TRIES];
GBLREF unsigned int t_tries;
GBLREF cw_set_element cw_set[CDB_CW_SET_SIZE];/* create write set. */
GBLREF boolean_t skip_dbtriggers; /* see gbldefs.c for description of this global */
GBLREF stack_frame *frame_pointer;
GBLREF mv_stent *mv_chain;
#ifdef GTM_TRIGGER
GBLREF int tprestart_state;
GBLREF int4 gtm_trigger_depth;
GBLREF int4 tstart_trigger_depth;
GBLREF boolean_t skip_INVOKE_RESTART;
GBLREF boolean_t ztwormhole_used; /* TRUE if $ztwormhole was used by trigger code */
#endif
#ifdef DEBUG
GBLREF boolean_t skip_block_chain_tail_check;
GBLREF boolean_t donot_INVOKE_MUMTSTART;
#endif
/* Globals that could change in value across nested trigger calls of gvcst_put AND need to be saved/restored */
GBLREF boolean_t is_dollar_incr;
GBLREF gd_region *gv_cur_region;
GBLREF gv_key *gv_currkey;
GBLREF gv_namehead *gv_target;
GBLREF mval *post_incr_mval;
GBLREF mval increment_delta_mval;
GBLREF sgm_info *sgm_info_ptr;
GBLREF sgmnt_addrs *cs_addrs;
GBLREF sgmnt_data_ptr_t cs_data;
UNIX_ONLY(GBLREF enum gtmImageTypes image_type;)
UNIX_ONLY(GBLREF boolean_t span_nodes_disallowed;)
error_def(ERR_DBROLLEDBACK);
error_def(ERR_GVINCRISOLATION);
error_def(ERR_GVIS);
error_def(ERR_GVPUTFAIL);
error_def(ERR_REC2BIG);
error_def(ERR_RSVDBYTE2HIGH);
error_def(ERR_TEXT);
error_def(ERR_TPRETRY);
error_def(ERR_UNIMPLOP);
/* Before issuing an error, add GVT to the list of known gvts in this TP transaction in case it is not already done.
* This GVT addition is usually done by "tp_hist" but that function has most likely not yet been invoked in gvcst_put.
* Doing this addition will ensure we remember to reset any non-zero clue in dir_tree as part of tp_clean_up when a TROLLBACK
* or TRESTART (implicit or explicit) occurs. Not doing so could cause transfer of control from the current gvcst_put action
* to a user-defined error trap which if it does further database references, it could end up using invalid clues from GVT
* and potentially incorrectly commit the transaction causing db integ errors as well.
*/
#define ENSURE_VALUE_WITHIN_MAX_REC_SIZE(value, GVT) \
{ \
if (dollar_tlevel) \
ADD_TO_GVT_TP_LIST(GVT); /* note: macro also updates read_local_tn if necessary */ \
if (VMS_ONLY(gv_currkey->end + 1 + SIZEOF(rec_hdr) +) value.len > gv_cur_region->max_rec_size) \
{ \
if (0 == (end = format_targ_key(buff, MAX_ZWR_KEY_SZ, gv_currkey, TRUE))) \
end = &buff[MAX_ZWR_KEY_SZ - 1]; \
rts_error(VARLSTCNT(10) ERR_REC2BIG, 4, VMS_ONLY(gv_currkey->end + 1 + SIZEOF(rec_hdr) +) \
value.len, (int4)gv_cur_region->max_rec_size, \
REG_LEN_STR(gv_cur_region), ERR_GVIS, 2, end - buff, buff); \
} \
}
/* See comment before ENSURE_VALUE_WITHIN_MAX_REC_SIZE macro definition for why the ADD_TO_GVT_TP_LIST call below is necessary */
#define ISSUE_RSVDBYTE2HIGH_ERROR(GVT) \
{ \
if (dollar_tlevel) \
ADD_TO_GVT_TP_LIST(GVT); /* note: macro also updates read_local_tn if necessary */ \
/* The record that is newly inserted/updated does not fit by itself in a separate block \
* if the current reserved-bytes for this database is taken into account. Cannot go on. \
*/ \
if (0 == (end = format_targ_key(buff, MAX_ZWR_KEY_SZ, gv_currkey, TRUE))) \
end = &buff[MAX_ZWR_KEY_SZ - 1]; \
rts_error(VARLSTCNT(11) ERR_RSVDBYTE2HIGH, 5, new_blk_size_single, \
REG_LEN_STR(gv_cur_region), blk_size, blk_reserved_bytes, \
ERR_GVIS, 2, end - buff, buff); \
}
#define RESTORE_ZERO_GVT_ROOT_ON_RETRY(LCL_ROOT, GV_TARGET, DIR_HIST, DIR_TREE) \
{ \
if (!LCL_ROOT) \
{ \
assert(NULL != DIR_HIST); \
assert(DIR_TREE == GV_TARGET->gd_csa->dir_tree); \
/* t_retry only resets gv_target->clue and not the clue of the directory tree. \
* But DIR_HIST non-null implies the directory tree was used in a gvcst_search and hence \
* was validated (in t_end/tp_hist),so we need to reset its clue before the next try. \
*/ \
DIR_TREE->clue.end = 0; \
/* We had reset the root block from zero to a non-zero value within \
* this function, but since we are restarting, we can no longer be \
* sure of the validity of the root block. Reset it to 0 so it will \
* be re-determined in the next global reference. \
*/ \
GV_TARGET->root = 0; \
} \
}
#define RECORD_FITS_IN_A_BLOCK(VAL, KEY, BLK_SZ, RESERVED_BYTES) \
((VAL)->str.len <= COMPUTE_CHUNK_SIZE(KEY, BLK_SZ, RESERVED_BYTES))
#define ZKILL_NODELETS \
{ \
APPEND_HIDDEN_SUB(gv_currkey); \
if (gv_target->root) \
gvcst_kill2(FALSE, NULL, TRUE); /* zkill any existing spanning nodelets.. */ \
RESTORE_CURRKEY(gv_currkey, oldend); \
}
#define POP_MVALS_FROM_M_STACK_IF_REALLY_NEEDED(lcl_span_status, ztold_mval, save_msp, save_mv_chain) \
{ \
if (!lcl_span_status) \
POP_MVALS_FROM_M_STACK_IF_NEEDED(ztold_mval, save_msp, save_mv_chain); \
}
#ifdef DEBUG
# define DBG_SAVE_VAL_AT_FUN_ENTRY \
{ /* Save copy of "val" at function entry. \
* Make sure this is not touched by any nested trigger code */ \
dbg_lcl_val = val; \
dbg_vallen = val->str.len; \
memcpy(dbg_valbuff, val->str.addr, MIN(ARRAYSIZE(dbg_valbuff), dbg_vallen)); \
}
# define DBG_CHECK_VAL_AT_FUN_EXIT \
{ /* Check "val" is same as what it was at function entry.(i.e. was not touched by nested trigger code). \
* The only exception is if $ZTVAL changed "val" in which case gvcst_put would have been redone. */ \
assert(dbg_vallen == dbg_lcl_val->str.len); \
assert(0 == memcmp(dbg_valbuff, dbg_lcl_val->str.addr, MIN(ARRAYSIZE(dbg_valbuff), dbg_vallen))); \
}
#else
# define DBG_SAVE_VAL_AT_FUN_ENTRY
# define DBG_CHECK_VAL_AT_FUN_EXIT
#endif
#define GOTO_RETRY \
{ \
GTMTRIG_DBG_ONLY(dbg_trace_array[dbg_num_iters].retry_line = __LINE__); \
goto retry; \
}
CONDITION_HANDLER(gvcst_put_ch)
{
int rc;
START_CH;
if ((int)ERR_TPRETRY == SIGNAL)
{ /* delay tp_restart till after the long jump and some other stuff */
UNWIND(NULL, NULL);
}
NEXTCH;
}
void gvcst_put(mval *val)
{
boolean_t sn_tpwrapped, fits;
boolean_t est_first_pass;
mval val_ctrl, val_piece, val_dummy;
mval *pre_incr_mval, *save_val;
block_id lcl_root;
int gblsize, chunk_size, i, oldend;
unsigned short numsubs;
unsigned char mychars[MAX_NSBCTRL_SZ];
int save_dollar_tlevel, rc;
boolean_t save_in_gvcst_incr; /* gvcst_put2 sets this FALSE, so save it in case we need to back out */
span_parms parms;
DCL_THREADGBL_ACCESS;
SETUP_THREADGBL_ACCESS;
parms.span_status = FALSE;
parms.blk_reserved_bytes = cs_data->reserved_bytes; /* Only want to read once for consistency */
parms.enable_trigger_read_and_fire = TRUE;
parms.enable_jnl_format = TRUE;
lcl_root = gv_target->root;
VMS_ONLY(gvcst_put2(val, &parms));
# ifdef UNIX /* deal with possibility of spanning nodes */
DEBUG_ONLY(save_dollar_tlevel = dollar_tlevel);
fits = RECORD_FITS_IN_A_BLOCK(val, gv_currkey, cs_data->blk_size, parms.blk_reserved_bytes);
save_in_gvcst_incr = in_gvcst_incr;
if (fits)
{
gvcst_put2(val, &parms);
if (!parms.span_status)
{
assert(save_dollar_tlevel == dollar_tlevel);
return; /* We've successfully set a normal non-spanning global. */
}
}
RTS_ERROR_IF_SN_DISALLOWED;
/* Either we need to create a spanning node, or kill one before resetting it */
GTMTRIG_ONLY(parms.ztold_mval = NULL);
cs_data->span_node_absent = FALSE;
oldend = gv_currkey->end;
val_dummy.str = nsb_dummy;
if (!dollar_tlevel)
{
sn_tpwrapped = TRUE;
save_val = val;
/* We pass the IMPLICIT_TRIGGER_TSTART flag because we might invoke a trigger, and in that case we want to avoid
* invoking a restart from within gtm_trigger. Since we remove gvcst_put_ch before invoking the trigger
* (see comment in errorsp.h), an attempt to invoke a restart returns us back to the mdb_condition_handler created
* by the initial dm-start. Unwinding from there returns to the OS -- i.e., the process silently dies.
* Also note that we need to ensure the retry logic at the bottom of gvcst_put2 is executed in case a restart
* happens within a trigger invocation. We want to return from gvtr_match_n_invoke so we can goto retry.
*/
op_tstart((IMPLICIT_TSTART + IMPLICIT_TRIGGER_TSTART), TRUE, &literal_batch, 0);
frame_pointer->flags |= SFF_IMPLTSTART_CALLD;
assert(!donot_INVOKE_MUMTSTART);
DEBUG_ONLY(donot_INVOKE_MUMTSTART = TRUE);
ESTABLISH_NORET(gvcst_put_ch, est_first_pass);
if (est_first_pass)
{ /* did a long jump back to here */
val = save_val;
GTMTRIG_ONLY(POP_MVALS_FROM_M_STACK_IF_NEEDED(parms.ztold_mval,
parms.save_msp, ((mv_stent *)parms.save_mv_chain)));
preemptive_ch(ERROR); /* Bluff about SEVERITY, just so gv_target and reset_gv_target will be reset.
* gv_target will be reset anyway in tp_restart, but reset_gv_target will not.
* This matches the flow of a non-spanning-node tp_restart, which goes
* through mdb_condition_handler/preemptive_ch.
*/
rc = tp_restart(1, !TP_RESTART_HANDLES_ERRORS);
DBG_CHECK_GVTARGET_GVCURRKEY_IN_SYNC;
RESTORE_ZERO_GVT_ROOT_ON_RETRY(lcl_root, gv_target, &cs_addrs->dir_tree->hist, cs_addrs->dir_tree);
fits = RECORD_FITS_IN_A_BLOCK(val, gv_currkey, cs_data->blk_size, parms.blk_reserved_bytes);
if (cdb_sc_onln_rlbk2 == LAST_RESTART_CODE)
/* Database was taken back to a different logical state. We are an implicit TP transaction, and
* as in the case of implicit TP for triggers, we issue a DBROLLEDBACK error that the application
* programmer can catch.
*/
rts_error(VARLSTCNT(1) ERR_DBROLLEDBACK);
}
tp_set_sgm();
GVCST_ROOT_SEARCH;
} else
sn_tpwrapped = FALSE;
parms.span_status = TRUE;
parms.enable_trigger_read_and_fire = TRUE;
parms.enable_jnl_format = TRUE;
parms.ztval_gvcst_put_redo = FALSE;
if (save_in_gvcst_incr)
{
in_gvcst_incr = FALSE; /* allow gvcst_put2 to do a regular set */
PUSH_MV_STENT(MVST_MVAL); /* protect pre_incr_mval from stp_gcol */
pre_incr_mval = &mv_chain->mv_st_cont.mvs_mval;
gvcst_get(pre_incr_mval); /* what if it doesn't exist? needs to be treated as 0 */
pre_incr_mval->mvtype = MV_STR;
op_add(pre_incr_mval, &increment_delta_mval, post_incr_mval);
POP_MV_STENT(); /* pre_incr_mval */
assert(MV_IS_NUMERIC(post_incr_mval));
MV_FORCE_STR(post_incr_mval);
val = post_incr_mval; /* its a number, should fit in single block.. unless ridick rsrvdbytes.. */
fits = RECORD_FITS_IN_A_BLOCK(val, gv_currkey, cs_data->blk_size, parms.blk_reserved_bytes);
}
/* Set the primary node. If we're setting a spanning node, that the primary node will have a dummy value, $char(0).
* Journal formatting and triggers happen here. If ztval changed during trigger invocations to a large value,
* we do a second gvcst_put2 to set the new value.
*/
parms.val_forjnl = val;
gvcst_put2(((fits) ? val : &val_dummy), &parms);
parms.enable_trigger_read_and_fire = FALSE;
# ifdef GTM_TRIGGER
if (parms.ztval_gvcst_put_redo)
{
val = parms.ztval_mval;
parms.enable_jnl_format = TRUE; /* new val needs to be journaled */
parms.val_forjnl = val;
fits = RECORD_FITS_IN_A_BLOCK(val, gv_currkey, cs_data->blk_size, parms.blk_reserved_bytes);
assert(!fits);
gvcst_put2(&val_dummy, &parms);
}
# endif
ZKILL_NODELETS; /* Even if not creating a spanning node, may be replacing one */
if (!fits)
{ /* Need to create a spanning node. Break value up into chunks. */
parms.enable_jnl_format = FALSE; /* jnl formatting already done */
APPEND_HIDDEN_SUB(gv_currkey);
chunk_size = COMPUTE_CHUNK_SIZE(gv_currkey, cs_data->blk_size, parms.blk_reserved_bytes);
gblsize = val->str.len;
numsubs = DIVIDE_ROUND_UP(gblsize, chunk_size);
PUT_NSBCTRL(mychars, numsubs, gblsize);
val_ctrl.str.addr = (char *)mychars;
val_ctrl.str.len = 6;
/* Count the spanning node set as one set */
INCR_GVSTATS_COUNTER(cs_addrs, cs_addrs->nl, n_set, 1);
gvcst_put2(&val_ctrl, &parms); /* Set control subscript, indicating glbsize and number of chunks */
for (i = 0; i < numsubs; i++)
{
NEXT_HIDDEN_SUB(gv_currkey, i);
val_piece.str.len = MIN(chunk_size, gblsize - i * chunk_size);
val_piece.str.addr = val->str.addr + i * chunk_size;
gvcst_put2(&val_piece, &parms);
}
RESTORE_CURRKEY(gv_currkey, oldend);
}
GTMTRIG_ONLY(POP_MVALS_FROM_M_STACK_IF_NEEDED(parms.ztold_mval, parms.save_msp, ((mv_stent *)parms.save_mv_chain)));
/* pop any stacked mvals before op_tcommit as it does its own popping */
if (sn_tpwrapped)
{
op_tcommit();
DEBUG_ONLY(donot_INVOKE_MUMTSTART = FALSE);
REVERT; /* remove our condition handler */
}
assert(save_dollar_tlevel == dollar_tlevel);
# endif /* ifdef UNIX */
}
void gvcst_put2(mval *val, span_parms *parms)
{
sgmnt_addrs *csa;
sgmnt_data_ptr_t csd;
node_local_ptr_t cnl;
int4 blk_size, blk_fill_size, blk_reserved_bytes;
const int4 zeroes = 0;
boolean_t jnl_format_done, is_dummy, needfmtjnl, fits, lcl_span_status;
blk_segment *bs1, *bs_ptr, *new_blk_bs;
block_id allocation_clue, tp_root, gvt_for_root, blk_num, last_split_blk_num[MAX_BT_DEPTH];
block_index left_hand_index, ins_chain_index, root_blk_cw_index, next_blk_index;
block_offset next_offset, first_offset, ins_off1, ins_off2, old_curr_chain_next_off;
cw_set_element *cse, *cse_new, *old_cse;
gv_namehead *save_targ, *split_targ, *dir_tree;
enum cdb_sc status;
gv_key *temp_key;
int tmp_cmpc;
mstr value;
off_chain chain1, curr_chain, prev_chain, chain2;
rec_hdr_ptr_t curr_rec_hdr, extra_rec_hdr, next_rec_hdr, new_star_hdr, rp, tmp_rp;
srch_blk_status *bh, *bq, *tp_srch_status;
srch_hist *dir_hist;
int cur_blk_size, blk_seg_cnt, delta, i, j, left_hand_offset, n, ins_chain_offset,
new_blk_size_l, new_blk_size_r, new_blk_size_single, new_blk_size, blk_reserved_size,
last_possible_left_offset, new_rec_size, next_rec_shrink, next_rec_shrink1, start_len,
offset_sum, rec_cmpc, target_key_size, tp_lev, undo_index, cur_val_offset, curr_offset, bh_level;
uint4 segment_update_array_size, key_top, cp2_len, bs1_2_len, bs1_3_len;
char *va, last_split_direction[MAX_BT_DEPTH];
sm_uc_ptr_t cp1, cp2, curr;
unsigned short extra_record_orig_size, rec_size, temp_short;
unsigned int prev_rec_offset, prev_rec_match, curr_rec_offset, curr_rec_match;
boolean_t copy_extra_record, level_0, new_rec, no_pointers, succeeded, key_exists;
boolean_t make_it_null, gbl_target_was_set, duplicate_set, new_rec_goes_to_right, need_extra_block_split;
key_cum_value *tempkv;
jnl_format_buffer *jfb, *ztworm_jfb;
jnl_action *ja;
mval *set_val; /* actual right-hand-side value of the SET or $INCR command */
mval *val_forjnl;
ht_ent_int4 *tabent;
unsigned char buff[MAX_ZWR_KEY_SZ], *end, old_ch, new_ch;
sm_uc_ptr_t buffaddr;
block_id lcl_root, last_split_bnum;
sgm_info *si;
uint4 nodeflags;
boolean_t write_logical_jnlrecs, can_write_logical_jnlrecs, blk_match, is_split_dir_left;
int split_depth;
mval *ja_val;
int rc;
int4 cse_first_off;
enum split_dir last_split_dir;
int4 data_len;
# ifdef GTM_TRIGGER
boolean_t is_tpwrap;
boolean_t ztval_gvcst_put_redo, skip_hasht_read;
gtm_trigger_parms trigparms;
gvt_trigger_t *gvt_trigger;
gvtr_invoke_parms_t gvtr_parms;
int gtm_trig_status;
unsigned char *save_msp;
mv_stent *save_mv_chain;
mval *ztold_mval = NULL;
mval *ztval_mval;
mint dlr_data;
boolean_t lcl_implicit_tstart; /* local copy of the global variable "implicit_tstart" */
mval lcl_increment_delta_mval; /* local copy of "increment_delta_mval" */
boolean_t lcl_is_dollar_incr; /* local copy of is_dollar_incr taken at start of module.
* used to restore is_dollar_incr in case of TP restarts */
mval *lcl_post_incr_mval; /* local copy of "post_incr_mval" at function entry.
* used to restore "post_incr_mval" in case of TP restarts */
mval *lcl_val; /* local copy of "val" at function entry.
* used to restore "val" in case of TP restarts */
mval *lcl_val_forjnl;
DEBUG_ONLY(enum cdb_sc save_cdb_status;)
# endif
# ifdef DEBUG
char dbg_valbuff[256];
mstr_len_t dbg_vallen;
mval *dbg_lcl_val;
int dbg_num_iters = -1; /* number of iterations through gvcst_put */
int lcl_dollar_tlevel, lcl_t_tries;
typedef struct
{
unsigned int t_tries;
int retry_line;
boolean_t is_fresh_tn_start;
boolean_t is_dollar_incr;
boolean_t ztval_gvcst_put_redo;
boolean_t is_extra_block_split;
mval *val;
boolean_t lcl_implicit_tstart;
} dbg_trace;
/* We want to capture all pertinent information across each iteration of gvcst_put.
* There are 3 things that can contribute to a new iteration.
* a) restarts from the primary set.
* Max of 4 iterations.
* b) extra_block_split from the primary set. It can have its own set of restarts too.
* Max of 4 iterations per extra_block_split.
* The # of extra block splits could be arbitrary in case of non-TP but cannot be more than 1 for TP
* because in TP, we would have grabbed crit in the final retry and prevent any more concurrent updates.
* c) ztval_gvcst_put_redo. This in turn can have its own set of restarts and extra_block_split iterations.
* Could take a max of (a) + (b) = 4 + 4 = 8 iterations.
* Total of 16 max iterations. If ever a transaction goes for more than this # of iterations (theoretically
* possible in non-TP if a lot of extra block splits occur), we assert fail.
*/
dbg_trace dbg_trace_array[16];
boolean_t is_fresh_tn_start;
boolean_t is_mm;
# endif
DCL_THREADGBL_ACCESS;
SETUP_THREADGBL_ACCESS;
is_dollar_incr = in_gvcst_incr;
in_gvcst_incr = FALSE;
csa = cs_addrs;
csd = csa->hdr;
cnl = csa->nl;
assert(csd == cs_data);
DEBUG_ONLY(is_mm = (dba_mm == csd->acc_meth);)
# ifdef GTM_TRIGGER
TRIG_CHECK_REPLSTATE_MATCHES_EXPLICIT_UPDATE(gv_cur_region, csa);
if (IS_EXPLICIT_UPDATE)
{ /* This is an explicit update. Set ztwormhole_used to FALSE. Note that we initialize this only at the
* beginning of the transaction and not at the beginning of each try/retry. If the application used
* $ztwormhole in any retsarting try of the transaction, we consider it necessary to write the
* TZTWORM/UZTWORM record even though it was not used in the succeeding/committing try.
*/
ztwormhole_used = FALSE;
}
# endif
JNLPOOL_INIT_IF_NEEDED(csa, csd, cnl);
blk_size = csd->blk_size;
blk_reserved_bytes = parms->blk_reserved_bytes;
blk_fill_size = (blk_size * gv_fillfactor) / 100 - blk_reserved_bytes;
lcl_span_status = parms->span_status;
if (lcl_span_status)
{
needfmtjnl = parms->enable_jnl_format;
val_forjnl = parms->val_forjnl;
# ifdef GTM_TRIGGER
ztold_mval = parms->ztold_mval;
skip_hasht_read = !parms->enable_trigger_read_and_fire;
# endif
} else
{
needfmtjnl = TRUE;
val_forjnl = val;
}
jnl_format_done = !needfmtjnl; /* do "jnl_format" only once per logical non-tp transaction irrespective of
* number of retries or number of chunks if spanning node
*/
GTMTRIG_ONLY(
ztval_gvcst_put_redo = FALSE;
skip_hasht_read = FALSE;
)
assert(('\0' != gv_currkey->base[0]) && gv_currkey->end);
DBG_CHECK_GVTARGET_GVCURRKEY_IN_SYNC;
/* this needs to be initialized before any code that does a "goto retry" since this gets used there */
save_targ = gv_target;
gbl_target_was_set = (INVALID_GV_TARGET != reset_gv_target);
if (INVALID_GV_TARGET != reset_gv_target)
gbl_target_was_set = TRUE;
else
{
gbl_target_was_set = FALSE;
reset_gv_target = save_targ;
}
DBG_SAVE_VAL_AT_FUN_ENTRY;
GTMTRIG_ONLY(
lcl_implicit_tstart = FALSE;
DEBUG_ONLY(gvtr_parms.num_triggers_invoked = -1;) /* set to an out-of-design value; checked by an assert */
)
DEBUG_ONLY(
status = cdb_sc_normal;
lcl_dollar_tlevel = dollar_tlevel;
)
fresh_tn_start:
DEBUG_ONLY(lcl_t_tries = -1;)
DEBUG_ONLY(is_fresh_tn_start = TRUE;)
assert(!jnl_format_done || (dollar_tlevel GTMTRIG_ONLY(&& ztval_gvcst_put_redo)) || lcl_span_status);
T_BEGIN_SETORKILL_NONTP_OR_TP(ERR_GVPUTFAIL);
tn_restart:
/* t_tries should never decrease - it either increases or stays the same. If should decrease we could live-lock with
* an oscillating t_tries and never reach CDB_STAGNATE (go from optimistic to pessimistic concurrency). Since we
* typically do a normal increment and then, for certain conditions, do a complementary decrement, we assert that
* the net effect is never a decrease.
*/
assert(csa == cs_addrs); /* no amount of retries should change cs_addrs from what it was at entry into gvcst_put */
assert((((int)t_tries) > lcl_t_tries) || (CDB_STAGNATE == t_tries));
DEBUG_ONLY(lcl_t_tries = t_tries;) /* update lcl_t_tries */
DEBUG_ONLY(
dbg_num_iters++;
assert(dbg_num_iters < ARRAYSIZE(dbg_trace_array));
dbg_trace_array[dbg_num_iters].is_fresh_tn_start = is_fresh_tn_start;
dbg_trace_array[dbg_num_iters].t_tries = t_tries;
is_fresh_tn_start = FALSE;
dbg_trace_array[dbg_num_iters].is_dollar_incr = is_dollar_incr;
GTMTRIG_ONLY(dbg_trace_array[dbg_num_iters].ztval_gvcst_put_redo = ztval_gvcst_put_redo;)
dbg_trace_array[dbg_num_iters].val = val;
GTMTRIG_ONLY(dbg_trace_array[dbg_num_iters].lcl_implicit_tstart = lcl_implicit_tstart;)
dbg_trace_array[dbg_num_iters].is_extra_block_split = FALSE;
dbg_trace_array[dbg_num_iters].retry_line = 0;
split_targ = NULL;
)
/* If MM and file extension occurred, reset csd to cs_data to avoid out-of-date value. If BG we dont need the reset
* but if checks are costlier than unconditional sets in a pipelined architecture so we choose not to do the if.
*/
assert(is_mm || (csd == cs_data));
csd = cs_data;
# ifdef GTM_TRIGGER
gvtr_parms.num_triggers_invoked = 0; /* clear any leftover value */
assert(!ztval_gvcst_put_redo || IS_PTR_INSIDE_M_STACK(val));
is_tpwrap = FALSE;
if (!skip_dbtriggers && !skip_hasht_read && parms->enable_trigger_read_and_fire)
{
GVTR_INIT_AND_TPWRAP_IF_NEEDED(csa, csd, gv_target, gvt_trigger, lcl_implicit_tstart, is_tpwrap, ERR_GVPUTFAIL);
assert(gvt_trigger == gv_target->gvt_trigger);
assert(gv_target == save_targ); /* gv_target should NOT have been mutated by the trigger reads */
if (is_tpwrap)
{ /* The above call to GVTR_INIT* macro created a TP transaction (by invoking op_tstart).
* Save all pertinent global variable information that needs to be restored in case of
* a restart. Note that the restart could happen in a nested trigger so these global
* variables could have changed in value from what they were at gvcst_put entry, hence
* the need to save/restore them. If this is not an implicitly tp wrapped transaction,
* there is no need to do this save/restore because a restart will transfer control
* back to the M code corresponding to the start of the transaction which would
* automatically initialize these global variables to the appropriate values.
*/
assert(lcl_implicit_tstart);
lcl_is_dollar_incr = is_dollar_incr;
lcl_val = val;
lcl_val_forjnl = val_forjnl;
lcl_post_incr_mval = post_incr_mval;
lcl_increment_delta_mval = increment_delta_mval;
jnl_format_done = FALSE;
}
if (NULL != gvt_trigger)
{
PUSH_ZTOLDMVAL_ON_M_STACK(ztold_mval, save_msp, save_mv_chain);
if (lcl_span_status)
{ /* Need the ability to pop vals from gvcst_put. */
parms->ztold_mval = ztold_mval;
parms->save_msp = save_msp;
parms->save_mv_chain = (unsigned char *)save_mv_chain;
}
}
}
# endif
assert(csd == cs_data); /* assert csd is in sync with cs_data even if there were MM db file extensions */
si = sgm_info_ptr; /* Cannot be moved before GVTR_INIT_AND_TPWRAP_IF_NEEDED macro since we could enter gvcst_put
* with sgm_info_ptr NULL but could tpwrap a non-tp transaction due to triggers. In that case
* we want the updated sgm_info_ptr to be noted down in si and used later.
*/
assert((NULL == si) || (si->update_trans));
assert(NULL != update_array);
assert(NULL != update_array_ptr);
assert(0 != update_array_size);
assert(update_array + update_array_size >= update_array_ptr);
/* When the following two asserts trip, we should change the data types of prev_first_off
* and prev_next_off, so they satisfy the assert.
*/
assert(SIZEOF(prev_first_off) >= SIZEOF(block_offset));
assert(SIZEOF(prev_next_off) >= SIZEOF(block_offset));
prev_first_off = prev_next_off = PREV_OFF_INVALID;
horiz_growth = FALSE;
assert(t_tries < CDB_STAGNATE || csa->now_crit); /* we better hold crit in the final retry (TP & non-TP) */
/* level_0 == true and no_pointers == false means that this is a directory tree data block containing pointers to roots */
level_0 = no_pointers = TRUE;
assert(gv_altkey->top == gv_currkey->top);
assert(gv_altkey->top == gv_keysize);
assert(gv_currkey->end < gv_currkey->top);
assert(gv_altkey->end < gv_altkey->top);
temp_key = gv_currkey;
dir_hist = NULL;
ins_chain_index = 0;
lcl_root = gv_target->root;
tp_root = lcl_root;
if (!dollar_tlevel)
{
CHECK_AND_RESET_UPDATE_ARRAY; /* reset update_array_ptr to update_array */
} else
{
segment_update_array_size = UA_NON_BM_SIZE(csd);
ENSURE_UPDATE_ARRAY_SPACE(segment_update_array_size);
curr_chain = *(off_chain *)&lcl_root;
if (curr_chain.flag == 1)
{
tp_get_cw(si->first_cw_set, (int)curr_chain.cw_index, &cse);
tp_root = cse->blk;
assert(tp_root);
}
}
if (0 == tp_root)
{ /* Global does not exist as far as we know. Creating a new one requires validating the directory tree path which
* led us to this conclusion. So scan the directory tree here and validate its history at the end of this function.
* If we decide to restart due to a concurrency conflict, remember to reset gv_target->root to 0 before restarting.
*/
gv_target = dir_tree = csa->dir_tree;
SET_GV_ALTKEY_TO_GBLNAME_FROM_GV_CURRKEY; /* set up gv_altkey to be just the gblname */
dir_hist = &gv_target->hist;
status = gvcst_search(gv_altkey, NULL);
RESET_GV_TARGET_LCL(save_targ);
if (cdb_sc_normal != status)
GOTO_RETRY;
if (gv_altkey->end + 1 == dir_hist->h[0].curr_rec.match)
{
tmp_rp = (rec_hdr_ptr_t)(dir_hist->h[0].buffaddr + dir_hist->h[0].curr_rec.offset);
EVAL_CMPC2(tmp_rp, tmp_cmpc);
GET_LONG(tp_root, (dir_hist->h[0].buffaddr + SIZEOF(rec_hdr)
+ dir_hist->h[0].curr_rec.offset + gv_altkey->end + 1 - tmp_cmpc));
if (dollar_tlevel)
{
gvt_for_root = dir_hist->h[0].blk_num;
curr_chain = *(off_chain *)&gvt_for_root;
if (curr_chain.flag == 1)
tp_get_cw(si->first_cw_set, curr_chain.cw_index, &cse);
else
{
if (NULL != (tabent = lookup_hashtab_int4(si->blks_in_use, (uint4 *)&gvt_for_root)))
tp_srch_status = tabent->value;
else
tp_srch_status = NULL;
cse = tp_srch_status ? tp_srch_status->cse : NULL;
}
assert(!cse || !cse->high_tlevel);
}
assert(0 == gv_target->root);
gv_target->root = tp_root;
}
}
blk_reserved_size = blk_size - blk_reserved_bytes;
if (0 == tp_root)
{ /* there is no entry in the GVT (and no root), so create a new empty tree and put the name in the GVT */
/* Create the data block */
key_exists = FALSE;
if (is_dollar_incr)
{ /* The global variable that is being $INCREMENTed does not exist.
* $INCREMENT() should not signal UNDEF error but proceed with an implicit $GET().
*/
assert(dollar_tlevel ? si->update_trans : update_trans);
*post_incr_mval = *val;
MV_FORCE_NUM(post_incr_mval);
post_incr_mval->mvtype &= ~MV_STR; /* needed to force any alphanumeric string to numeric */
MV_FORCE_STR(post_incr_mval);
assert(post_incr_mval->str.len);
value = post_incr_mval->str;
/* The MAX_REC_SIZE check could not be done in op_gvincr (like is done in op_gvput) because
* the post-increment value is not known until here. so do the check here.
*/
ENSURE_VALUE_WITHIN_MAX_REC_SIZE(value, dir_tree);
} else
value = val->str;
/* Potential size of a GVT leaf block containing just the new/updated record */
new_blk_size_single = SIZEOF(blk_hdr) + SIZEOF(rec_hdr) + temp_key->end + 1 + value.len;
if (new_blk_size_single > blk_reserved_size)
{ /* The record that is newly inserted/updated does not fit by itself in a separate block
* if the current reserved-bytes for this database is taken into account. Cannot go on.
*/
ISSUE_RSVDBYTE2HIGH_ERROR(dir_tree);
}
BLK_ADDR(curr_rec_hdr, SIZEOF(rec_hdr), rec_hdr);
curr_rec_hdr->rsiz = SIZEOF(rec_hdr) + temp_key->end + 1 + value.len;
SET_CMPC(curr_rec_hdr, 0);
BLK_INIT(bs_ptr, new_blk_bs);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)curr_rec_hdr, SIZEOF(rec_hdr));
BLK_ADDR(cp1, temp_key->end + 1, unsigned char);
memcpy(cp1, temp_key->base, temp_key->end + 1);
BLK_SEG(bs_ptr, cp1, temp_key->end + 1);
if (0 != value.len)
{
BLK_ADDR(va, value.len, char);
memcpy(va, value.addr, value.len);
BLK_SEG(bs_ptr, (unsigned char *)va, value.len);
}
if (0 == BLK_FINI(bs_ptr, new_blk_bs))
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
assert(new_blk_bs[0].len <= blk_reserved_size); /* Assert that new block has space for reserved bytes */
/* Create the index block */
BLK_ADDR(curr_rec_hdr, SIZEOF(rec_hdr), rec_hdr);
curr_rec_hdr->rsiz = BSTAR_REC_SIZE;
SET_CMPC(curr_rec_hdr, 0);
BLK_INIT(bs_ptr, bs1);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)curr_rec_hdr, SIZEOF(rec_hdr));
BLK_SEG(bs_ptr, (unsigned char *)&zeroes, SIZEOF(block_id));
if (0 == BLK_FINI(bs_ptr, bs1))
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
assert(bs1[0].len <= blk_reserved_size); /* Assert that new block has space for reserved bytes */
allocation_clue = ALLOCATION_CLUE(csd->trans_hist.total_blks);
next_blk_index = t_create(allocation_clue, (uchar_ptr_t)new_blk_bs, 0, 0, 0);
++allocation_clue;
ins_chain_index = t_create(allocation_clue, (uchar_ptr_t)bs1, SIZEOF(blk_hdr) + SIZEOF(rec_hdr), next_blk_index, 1);
root_blk_cw_index = ins_chain_index;
temp_key = gv_altkey;
gv_target->hist.h[0].blk_num = HIST_TERMINATOR;
gv_target = dir_tree;
bh = &gv_target->hist.h[0];
value.len = SIZEOF(block_id);
value.addr = (char *)&zeroes;
no_pointers = FALSE;
} else
{
# ifdef GTM_TRIGGER
if (lcl_span_status && (NULL != ztold_mval) && !skip_hasht_read && parms->enable_trigger_read_and_fire)
{ /* Dealing with spanning nodes, need to use a get routine to find ztold_val. Need to do this BEFORE
* gvcst_search below or we'll disrupt gv_target->hist, which is used in the subsequent constructions.
* Though we don't need dollar_data, we use gvcst_dataget since it returns status, allowing retry
* cleanup to be done (RESET_GV_TARGET_LCL_AND_CLR_GBL in particular) before invoking a restart.
*/
assert(dollar_tlevel && !skip_dbtriggers);
dlr_data = DG_GETONLY; /* tell dataget we just want to do a get; we don't care about descendants */
status = gvcst_dataget(&dlr_data, ztold_mval);
if (cdb_sc_normal != status)
GOTO_RETRY;
}
# endif
#if defined(DEBUG) && defined(UNIX)
if (gtm_white_box_test_case_enabled && (WBTEST_ANTIFREEZE_GVINCRPUTFAIL == gtm_white_box_test_case_number))
{
status = cdb_sc_blknumerr;
GOTO_RETRY;
}
#endif
if (cdb_sc_normal != (status = gvcst_search(gv_currkey, NULL)))
GOTO_RETRY;
target_key_size = gv_currkey->end + 1;
bh = &gv_target->hist.h[0];
key_exists = (target_key_size == bh->curr_rec.match);
# ifdef UNIX
if (key_exists)
{ /* check for spanning node dummy value: a single zero byte */
rp = (rec_hdr_ptr_t)((sm_uc_ptr_t)bh->buffaddr + bh->curr_rec.offset);
GET_USHORT(rec_size, &rp->rsiz);
cur_val_offset = SIZEOF(rec_hdr) + target_key_size - EVAL_CMPC((rec_hdr_ptr_t)rp);
data_len = rec_size - cur_val_offset;
is_dummy = (1 == data_len) && ('\0' == *(sm_uc_ptr_t)((sm_uc_ptr_t)rp + cur_val_offset));
if (is_dummy && !lcl_span_status && (csa->dir_tree != gv_target)
&& !(span_nodes_disallowed && csd->span_node_absent))
{ /* Validate that value is really $zchar(0) and either restart or back out of gvcst_put2.
* Three cases:
* 1) not in TP, no triggers
* 2) in TP (triggers invoked or not)
* 3) weren't in TP when we entered gvcst_put2, but did an op_tstart to check for triggers
*/
RESET_GV_TARGET_LCL_AND_CLR_GBL(save_targ, DO_GVT_GVKEY_CHECK);
if (!dollar_tlevel)
{
update_trans = 0;
succeeded = ((trans_num)0 != t_end(&gv_target->hist, dir_hist, TN_NOT_SPECIFIED));
if (!succeeded)
{ /* see other t_end */
RESTORE_ZERO_GVT_ROOT_ON_RETRY(lcl_root, gv_target, dir_hist, dir_tree);
jnl_format_done = !needfmtjnl;
GTMTRIG_DBG_ONLY(dbg_trace_array[dbg_num_iters].retry_line = __LINE__);
update_trans = UPDTRNS_DB_UPDATED_MASK;
goto tn_restart;
}
} else
{
status = tp_hist(dir_hist);
if (NULL != dir_hist)
ADD_TO_GVT_TP_LIST(dir_tree);
if (cdb_sc_normal != status)
GOTO_RETRY;
# ifdef GTM_TRIGGER
if (lcl_implicit_tstart)
{ /* Started TP for playing triggers. Abort and try again outside after nsb op_tstart
* Otherwise, we were already in TP when we came into gvcst_put. Triggers can stay,
* but finish put outside.
*/
POP_MVALS_FROM_M_STACK_IF_NEEDED(ztold_mval, save_msp, save_mv_chain);
OP_TROLLBACK(-1);
}
# endif
}
parms->span_status = TRUE;
return;
}
}
# endif
if (is_dollar_incr)
{
if (key_exists)
{ /* $INCR is being done on an existing global variable key in the database.
* the value to set the key to has to be determined by adding the existing value
* with the increment passed as the input parameter "val" (of type (mval *)) to gvcst_put
*/
if (cdb_sc_normal != (status = gvincr_compute_post_incr(bh)))
{
assert(CDB_STAGNATE > t_tries);
GOTO_RETRY;
}
} else
{ /* The global variable that is being $INCREMENTed does not exist. $INCREMENT() should not
* signal UNDEF error but proceed with an implicit $GET() */
*post_incr_mval = *val;
MV_FORCE_NUM(post_incr_mval);
post_incr_mval->mvtype &= ~MV_STR; /* needed to force any alphanumeric string to numeric */
MV_FORCE_STR(post_incr_mval);
assert(post_incr_mval->str.len);
}
assert(MV_IS_STRING(post_incr_mval));
assert(dollar_tlevel ? si->update_trans : update_trans);
value = post_incr_mval->str;
/* The MAX_REC_SIZE check could not be done in op_gvincr (like is done in op_gvput) because
* the post-increment value is not known until here. so do the check here.
*/
ENSURE_VALUE_WITHIN_MAX_REC_SIZE(value, gv_target);
} else
value = val->str;
}
/* --------------------------------------------------------------------------------------------
* The code for the non-block-split case is very similar to the code in recompute_upd_array.
* Any changes in either place should be reflected in the other.
* --------------------------------------------------------------------------------------------
*/
need_extra_block_split = FALSE; /* Assume we don't require an additional block split (most common case) */
duplicate_set = FALSE; /* Assume this is NOT a duplicate set (most common case) */
split_depth = 0;
split_targ = gv_target;
for (succeeded = FALSE; !succeeded; no_pointers = level_0 = FALSE)
{
buffaddr = bh->buffaddr;
cur_blk_size = ((blk_hdr_ptr_t)buffaddr)->bsiz;
target_key_size = temp_key->end + 1;
/* Potential size of a block containing just the new/updated record */
new_blk_size_single = SIZEOF(blk_hdr) + SIZEOF(rec_hdr) + target_key_size + value.len;
if (new_blk_size_single > blk_reserved_size)
{ /* The record that is newly inserted/updated does not fit by itself in a separate block
* if the current reserved-bytes for this database is taken into account. If this is not a
* GVT leaf block, this situation is then possible if we are not in the final retry (and hence
* dont hold crit on the region) and "temp_key->end" (and in turn "target_key_size") was
* computed from a stale copy (due to concurrent updates or buffer reuse) of the global buffer
* (effectively a restartable situation). If so, restart. If not issue error.
*/
if (no_pointers || (CDB_STAGNATE <= t_tries))
{
ISSUE_RSVDBYTE2HIGH_ERROR(gv_target);
} else
{
status = cdb_sc_mkblk;
GOTO_RETRY;
}
}
curr_rec_match = bh->curr_rec.match;
curr_rec_offset = bh->curr_rec.offset;
new_rec = (target_key_size != curr_rec_match);
if (!new_rec && !no_pointers)
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_lostcr; /* will a new cdb_sc status be better */
GOTO_RETRY;
}
rp = (rec_hdr_ptr_t)(buffaddr + curr_rec_offset);
if (curr_rec_offset == cur_blk_size)
{
if ((FALSE == new_rec) && dollar_tlevel)
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
rec_cmpc = 0;
rec_size = 0;
} else
{
GET_USHORT(rec_size, &rp->rsiz);
rec_cmpc = EVAL_CMPC(rp);
if ((sm_uc_ptr_t)rp + rec_size > (sm_uc_ptr_t)buffaddr + cur_blk_size)
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
}
prev_rec_match = bh->prev_rec.match;
if (new_rec)
{
new_rec_size = SIZEOF(rec_hdr) + target_key_size - prev_rec_match + value.len;
if (cur_blk_size <= (signed int)curr_rec_offset) /* typecast necessary to enforce "signed int" comparison */
next_rec_shrink = 0;
else
next_rec_shrink = curr_rec_match - rec_cmpc;
delta = new_rec_size - next_rec_shrink;
} else
{
if (rec_cmpc != prev_rec_match)
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
assert(target_key_size > rec_cmpc);
cur_val_offset = SIZEOF(rec_hdr) + (target_key_size - rec_cmpc);
# ifdef GTM_TRIGGER
if (no_pointers && (NULL != ztold_mval) && !skip_hasht_read && parms->enable_trigger_read_and_fire
&& !lcl_span_status)
{ /* Complete initialization of ztold_mval */
assert(!skip_dbtriggers);
data_len = rec_size - cur_val_offset;
if (0 > data_len)
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_rmisalign;
GOTO_RETRY;
}
ztold_mval->str.len = data_len;
if (data_len)
{
ENSURE_STP_FREE_SPACE(data_len);
ztold_mval->str.addr = (char *)stringpool.free;
memcpy(ztold_mval->str.addr, (sm_uc_ptr_t)rp + cur_val_offset, data_len);
stringpool.free += data_len;
}
ztold_mval->mvtype = MV_STR; /* ztold_mval is now completely initialized */
}
# endif
new_rec_size = cur_val_offset + value.len;
delta = new_rec_size - rec_size;
if (!delta && value.len
&& !memcmp(value.addr, (sm_uc_ptr_t)rp + new_rec_size - value.len, value.len))
{
duplicate_set = TRUE;
if (gvdupsetnoop)
{ /* We do not want to touch the DB Blocks in case of a duplicate set unless the
* dupsetnoop optimization is disabled. Since it is enabled, let us break right away.
*/
succeeded = TRUE;
break; /* duplicate SET */
}
}
next_rec_shrink = 0;
}
blk_num = bh->blk_num;
bh_level = bh->level;
if (dollar_tlevel)
{
if ((SIZEOF(rec_hdr) + target_key_size - prev_rec_match + value.len) != new_rec_size)
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
chain1 = *(off_chain *)&blk_num;
if ((1 == chain1.flag) && ((int)chain1.cw_index >= si->cw_set_depth))
{
assert(si->tp_csa == csa);
assert(FALSE == csa->now_crit);
status = cdb_sc_blknumerr;
GOTO_RETRY;
}
}
next_rec_shrink1 = next_rec_shrink;
/* Potential size of the current block including the new/updated record */
new_blk_size = cur_blk_size + delta;
/* It is possible due to concurrency issues (for example if the buffer that we are planning on updating
* in shared memory got reused for a different block) that "new_blk_size" is lesser than "new_blk_size_single"
* In those cases, we will go into the non-block-split case but eventually we will restart.
*/
assert((new_blk_size >= new_blk_size_single) || (CDB_STAGNATE > t_tries));
if ((new_blk_size <= blk_fill_size) || (new_blk_size <= new_blk_size_single))
{ /* Update can be done without overflowing the block's fillfactor OR the record to be updated
* is the only record in the new block. Do not split block in either case. This means we might
* not honour the desired FillFactor if the only record in a block exceeds the blk_fill_size,
* but in this case we are guaranteed the block has room for the current reserved bytes.
*/
if (no_pointers) /* level zero (normal) data block: no deferred pointer chains */
ins_chain_offset = 0;
else /* index or directory level block */
ins_chain_offset =(int)((sm_uc_ptr_t)rp - buffaddr + new_rec_size - SIZEOF(block_id));
BLK_INIT(bs_ptr, bs1);
if (0 == rc_set_fragment)
{
BLK_SEG(bs_ptr, buffaddr + SIZEOF(blk_hdr), curr_rec_offset - SIZEOF(blk_hdr));
BLK_ADDR(curr_rec_hdr, SIZEOF(rec_hdr), rec_hdr);
curr_rec_hdr->rsiz = new_rec_size;
SET_CMPC(curr_rec_hdr, prev_rec_match);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)curr_rec_hdr, SIZEOF(rec_hdr));
BLK_ADDR(cp1, target_key_size - prev_rec_match, unsigned char);
memcpy(cp1, temp_key->base + prev_rec_match, target_key_size - prev_rec_match);
BLK_SEG(bs_ptr, cp1, target_key_size - prev_rec_match);
if (0 != value.len)
{
BLK_ADDR(va, value.len, char);
memcpy(va, value.addr, value.len);
BLK_SEG(bs_ptr, (unsigned char *)va, value.len);
}
if (!new_rec)
rp = (rec_hdr_ptr_t)((sm_uc_ptr_t)rp + rec_size);
n = (int)(cur_blk_size - ((sm_uc_ptr_t)rp - buffaddr));
if (n > 0)
{
if (new_rec)
{
BLK_ADDR(next_rec_hdr, SIZEOF(rec_hdr), rec_hdr);
next_rec_hdr->rsiz = rec_size - next_rec_shrink;
SET_CMPC(next_rec_hdr, curr_rec_match);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)next_rec_hdr, SIZEOF(rec_hdr));
next_rec_shrink += SIZEOF(rec_hdr);
}
if (n >= next_rec_shrink)
{
BLK_SEG(bs_ptr, (sm_uc_ptr_t)rp + next_rec_shrink, n - next_rec_shrink);
} else
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
}
} else
{ /* With GT.M TRIGGERS, it is not clear how the RC protocol will work. The below assert is to
* be informed whenever such usage happens (expected to be really rare) and handle it right
* then instead of worrying about it during the initial trigger implementation.
*/
assert(FALSE);
curr_rec_hdr = (rec_hdr_ptr_t)(buffaddr + curr_rec_offset);
EVAL_CMPC2(curr_rec_hdr, tmp_cmpc);
/* First piece is block prior to record + key + data prior to fragment */
BLK_SEG(bs_ptr,
buffaddr + SIZEOF(blk_hdr),
curr_rec_offset - SIZEOF(blk_hdr) + SIZEOF(rec_hdr) + rc_set_fragment
+ gv_currkey->end + 1 - tmp_cmpc);
/* Second piece is fragment itself */
BLK_ADDR(va, value.len, char);
memcpy(va, value.addr, value.len);
BLK_SEG(bs_ptr, (unsigned char *)va, value.len);
/* Third piece is data after fragment + rest of block after record */
n = (int)(cur_blk_size - ((sm_uc_ptr_t)curr_rec_hdr - buffaddr) - SIZEOF(rec_hdr)
- (gv_currkey->end + 1 - tmp_cmpc) - rc_set_fragment - value.len);
if (0 < n)
BLK_SEG(bs_ptr,
(sm_uc_ptr_t)curr_rec_hdr + gv_currkey->end + 1 - tmp_cmpc
+ rc_set_fragment + value.len,
n);
}
if (0 == BLK_FINI(bs_ptr, bs1))
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
assert(bs1[0].len <= blk_reserved_size); /* Assert that new block has space for reserved bytes */
cse = t_write(bh, (unsigned char *)bs1, ins_chain_offset, ins_chain_index, bh_level,
FALSE, FALSE, GDS_WRITE_PLAIN);
assert(!dollar_tlevel || !cse->high_tlevel);
if ((0 != ins_chain_offset) && (NULL != cse) && (0 != cse->first_off))
{ /* formerly tp_offset_chain - inserts a new_entry in the chain */
assert((NULL != cse->new_buff) || horiz_growth && cse->low_tlevel->new_buff
&& (buffaddr == cse->low_tlevel->new_buff));
assert(0 == cse->next_off);
assert(ins_chain_offset > (signed)SIZEOF(blk_hdr)); /* we want signed comparison */
assert((curr_rec_offset - SIZEOF(off_chain)) == (ins_chain_offset - new_rec_size));
offset_sum = cse->first_off;
curr = buffaddr + offset_sum;
/* The typecast is needed below to enforce a "signed int" (versus "unsigned int") comparison */
if (offset_sum >= (signed int)curr_rec_offset)
{ /* the new record is prior to the first existing chain record, id the new one as first */
/* first_off-------------v--------------------v
* [blk_hdr]...[new rec ( )]...[existing rec ( )]... */
cse->next_off = cse->first_off - (ins_chain_offset - new_rec_size) - next_rec_shrink1;
cse->first_off = ins_chain_offset;
} else
{
if (horiz_growth)
{
old_cse = cse->low_tlevel;
assert(old_cse->first_off);
assert(old_cse && old_cse->done);
assert(!old_cse->undo_next_off[0] && !old_cse->undo_offset[0]);
}
/* find chain records before and after the new one */
for ( ; ; curr += curr_chain.next_off)
{ /* try to make offset_sum identify the first chain entry after the new record */
GET_LONGP(&curr_chain, curr);
assert(curr_chain.flag == 1);
if (0 == curr_chain.next_off)
break;
offset_sum += curr_chain.next_off;
/* The typecast is needed below to enforce a "signed int" comparison */
if (offset_sum >= (signed int)curr_rec_offset)
break;
}
/* store the next_off in old_cse before changing it in the buffer (for rolling back) */
if (horiz_growth)
{
old_cse->undo_next_off[0] = curr_chain.next_off;
old_cse->undo_offset[0] = (block_offset)(curr - buffaddr);
assert(old_cse->undo_offset[0]);
}
if (0 == curr_chain.next_off)
{ /* the last chain record precedes the new record: just update it */
/* ---|---------------v
* [blk_hdr]...[existing rec ( )]...[new rec ( )]... */
curr_chain.next_off = ins_chain_offset - offset_sum;
GET_LONGP(curr, &curr_chain);
} else
{ /* update the chain record before the new one */
/* ---|---------------v--------------------v
* [blk_hdr]...[existing rec ( )]...[new rec ( )]...[existing rec ( )] */
curr_chain.next_off = (unsigned int)(ins_chain_offset - (curr - buffaddr));
GET_LONGP(curr, &curr_chain);
cse->next_off = offset_sum - (ins_chain_offset - new_rec_size) - next_rec_shrink1;
}
}
assert((ins_chain_offset + (int)cse->next_off) <=
(delta + (sm_long_t)cur_blk_size - SIZEOF(off_chain)));
}
succeeded = TRUE;
if (level_0)
{
if (new_rec)
{ /* New record insertion at leaf level. gvcst_search would have already updated clue to
* reflect the new key, but we need to fix the search history to keep it in sync with clue.
* This search history (and clue) will be used by the NEXT call to gvcst_search.
* Note that clue.end could be 0 at this point (see "Clue less than first rec, invalidate"
* comment in gvcst_search) in which case the below assignment is unnecessary (though does
* not hurt) but we want to avoid the if check (since we expect clue to be non-zero mostly).
*/
assert((0 == gv_target->clue.end) || (gv_target->clue.end + 1 == target_key_size));
assert(1 < target_key_size);
assert(bh->curr_rec.match != target_key_size);
bh->curr_rec.match = target_key_size;
}
/* -------------------------------------------------------------------------------------------------
* We have to maintain information for future recomputation only if the following are satisfied
* 1) The block is a leaf-level block
* 2) We are in TP (indicated by non-null cse)
* 3) The global has NOISOLATION turned ON
* 4) The cw_set_element hasn't encountered a block-split or a kill
* 5) We don't need an extra_block_split
*
* We can also add an optimization that only cse's of mode gds_t_write need to have such updations,
* but because of the belief that for a nonisolated variable, we will very rarely encounter a
* situation where a created block (in TP) will have some new keys added to it, and that adding
* the check slows down the normal code, we don't do that check here.
* -------------------------------------------------------------------------------------------------
*/
if (cse && gv_target->noisolation && !cse->write_type && !need_extra_block_split)
{
assert(dollar_tlevel);
if (is_dollar_incr)
{
ADD_TO_GVT_TP_LIST(gv_target); /* See comment in ENSURE_VALUE_WITHIN_MAX_REC_SIZE
* macro definition for why this macro call is necessary */
rts_error(VARLSTCNT(4) ERR_GVINCRISOLATION, 2,
gv_target->gvname.var_name.len, gv_target->gvname.var_name.addr);
}
if (NULL == cse->recompute_list_tail ||
0 != memcmp(gv_currkey->base, cse->recompute_list_tail->key.base,
gv_currkey->top))
{
tempkv = (key_cum_value *)get_new_element(si->recompute_list, 1);
tempkv->key = *gv_currkey;
tempkv->next = NULL;
memcpy(tempkv->key.base, gv_currkey->base, gv_currkey->end + 1);
if (NULL == cse->recompute_list_head)
{
assert(NULL == cse->recompute_list_tail);
cse->recompute_list_head = tempkv;
} else
cse->recompute_list_tail->next = tempkv;
cse->recompute_list_tail = tempkv;
} else
tempkv = cse->recompute_list_tail;
assert(0 == val->str.len
|| ((val->str.len == bs1[4].len)
&& 0 == memcmp(val->str.addr, bs1[4].addr, val->str.len)));
tempkv->value.len = val->str.len; /* bs1[4].addr is undefined if val->str.len is 0 */
tempkv->value.addr = (char *)bs1[4].addr;/* but not used in that case, so ok */
}
}
} else
{ /* Block split required */
split_depth++;
gv_target->clue.end = 0; /* invalidate clue */
/* Potential size of the left and right blocks, including the new record */
new_blk_size_l = curr_rec_offset + new_rec_size;
new_blk_size_r = SIZEOF(blk_hdr) + SIZEOF(rec_hdr) + target_key_size + value.len + cur_blk_size
- curr_rec_offset - (new_rec ? next_rec_shrink : rec_size);
assert(new_blk_size_single <= blk_reserved_size);
assert(blk_reserved_size >= blk_fill_size);
extra_record_orig_size = 0;
prev_rec_offset = bh->prev_rec.offset;
assert(new_blk_size_single <= new_blk_size_r);
/* Decide which side (left or right) the new record goes. Ensure either side has at least one record.
* This means we might not honor the desired FillFactor if the only record in a block exceeds the
* blk_fill_size, but in this case we are guaranteed the block has room for the current reserved bytes.
* The typecast of curr_rec_offset is needed below to enforce a "signed int" comparison.
*/
if (new_blk_size_r > blk_fill_size)
{
new_rec_goes_to_right = (new_blk_size_r == new_blk_size_single);
last_split_dir = NEWREC_DIR_FORCED; /* no choice in split direction */
} else if (new_blk_size_l > blk_fill_size)
{
new_rec_goes_to_right = TRUE;
last_split_dir = NEWREC_DIR_FORCED; /* no choice in split direction */
} else
{ /* new_rec can go in either direction without any issues of fitting in.
* This is where we need to use a few heuristics to ensure good block space utilization.
* We note down which direction (left or right) the new record went in after the split.
* We use that as the heuristic to identify the direction of data loading and do the
* splits accordingly for future updates.
*/
last_split_dir = (enum split_dir)gv_target->last_split_direction[bh_level];
if (NEWREC_DIR_FORCED == last_split_dir)
{ /* dont have prior information to use heuristic. choose whichever side is less full.
* if this turns out to not be the correct choice, we will correct ourselves at the
* time of the next block split at the same level.
*/
last_split_dir = (new_blk_size_l < new_blk_size_r) ? NEWREC_DIR_LEFT : NEWREC_DIR_RIGHT;
} else
{ /* Last block split at this level chose a specific direction for new_rec. See if
* that heuristic worked. This is done by checking if the block # that new_rec went
* into previously is the same block that is being split now. If so, that means the
* previous choice of direction was actually not optimal. So try the other direction now.
*/
last_split_bnum = gv_target->last_split_blk_num[bh_level];
if (dollar_tlevel)
{
chain2 = *(off_chain *)&last_split_bnum;
if (chain1.flag == chain2.flag)
{
if (!chain1.flag)
blk_match = (blk_num == last_split_bnum);
else
{
assert(chain1.cw_index < si->cw_set_depth);
blk_match = (chain1.cw_index == chain2.cw_index);
}
} else
blk_match = FALSE;
} else
{
DEBUG_ONLY(chain1 = *(off_chain *)&last_split_bnum;)
assert(!chain1.flag);
blk_match = (blk_num == last_split_bnum);
}
is_split_dir_left = (NEWREC_DIR_LEFT == last_split_dir);
if (blk_match) /* switch direction since last choice did not seem to have worked */
last_split_dir = is_split_dir_left ? NEWREC_DIR_RIGHT : NEWREC_DIR_LEFT;
else
{ /* blk# did not match means there is a high likelihood that the current split
* is happening in the OTHER sibling block from the previous block split operation
* at the same level. There is no easy way of confirming this so we assume the
* heuristic is doing its job, unless we see evidence otherwise. And that evidence
* is IF the block sizes of the left and right halves dont match the direction of
* choice (e.g. if we choose NEWREC_DIR_LEFT, we expect the right block to be
* almost full and the left block to be almost empty and vice versa).
* In this case too switch the direction.
*/
if (is_split_dir_left)
{
if (new_blk_size_l > new_blk_size_r)
last_split_dir = NEWREC_DIR_RIGHT;
} else
{
if (new_blk_size_l < new_blk_size_r)
last_split_dir = NEWREC_DIR_LEFT;
}
}
}
new_rec_goes_to_right = (NEWREC_DIR_RIGHT == last_split_dir);
}
last_split_direction[bh_level] = (char)last_split_dir;
if (new_rec_goes_to_right)
{ /* Left side of this block will be split off into a new block.
* The new record and the right side of this block will remain in this block.
*/
/* prepare new block */
BLK_INIT(bs_ptr, bs1);
if (level_0)
{
BLK_SEG(bs_ptr, buffaddr + SIZEOF(blk_hdr), curr_rec_offset - SIZEOF(blk_hdr));
} else
{ /* for index records, the record before the split becomes a new *-key */
/* Note: If the block split was caused by our appending the new record
* to the end of the block, this code causes the record PRIOR to the
* current *-key to become the new *-key.
*/
BLK_SEG(bs_ptr, buffaddr + SIZEOF(blk_hdr), prev_rec_offset - SIZEOF(blk_hdr));
BLK_ADDR(new_star_hdr, SIZEOF(rec_hdr), rec_hdr);
new_star_hdr->rsiz = BSTAR_REC_SIZE;
SET_CMPC(new_star_hdr, 0);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)new_star_hdr, SIZEOF(rec_hdr));
BLK_SEG(bs_ptr, (sm_uc_ptr_t)rp - SIZEOF(block_id), SIZEOF(block_id));
}
new_blk_bs = bs1;
if (0 == BLK_FINI(bs_ptr,bs1))
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
/* We want to assert that the left block has enough space for reserved bytes but
* it is possible that it DOES NOT have enough space for reserved bytes if the pre-split
* block was previously populated with a very low reserved bytes setting and if the current
* reserved bytes setting is much higher than what the chosen split point would free up.
* This is an issue waiting to be fixed by C9K01-003221. Until then the following assert
* has to remain commented out.
*
* assert(bs1[0].len <= blk_reserved_size);
*/
/* prepare the existing block */
BLK_INIT(bs_ptr, bs1);
ins_chain_offset = no_pointers ? 0 : (int)(SIZEOF(blk_hdr) + SIZEOF(rec_hdr) + target_key_size);
left_hand_offset = left_hand_index
= 0;
if (!new_rec)
rp = (rec_hdr_ptr_t)((sm_uc_ptr_t)rp + rec_size);
BLK_ADDR(curr_rec_hdr, SIZEOF(rec_hdr), rec_hdr);
curr_rec_hdr->rsiz = target_key_size + SIZEOF(rec_hdr) + value.len;
SET_CMPC(curr_rec_hdr, 0);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)curr_rec_hdr, SIZEOF(rec_hdr));
BLK_ADDR(cp1, target_key_size, unsigned char);
memcpy(cp1, temp_key->base, target_key_size);
BLK_SEG(bs_ptr, cp1, target_key_size);
if (0 != value.len)
{
BLK_ADDR(va, value.len, char);
memcpy(va, value.addr, value.len);
BLK_SEG(bs_ptr, (unsigned char *)va, value.len);
}
if (buffaddr + cur_blk_size > (sm_uc_ptr_t)rp)
{
BLK_ADDR(next_rec_hdr, SIZEOF(rec_hdr), rec_hdr);
GET_USHORT(next_rec_hdr->rsiz, &rp->rsiz);
next_rec_hdr->rsiz -= next_rec_shrink;
SET_CMPC(next_rec_hdr, new_rec ? curr_rec_match : EVAL_CMPC(rp));
BLK_SEG(bs_ptr, (sm_uc_ptr_t)next_rec_hdr, SIZEOF(rec_hdr));
next_rec_shrink += SIZEOF(rec_hdr);
n = cur_blk_size - INTCAST(((sm_uc_ptr_t)rp - buffaddr)) - next_rec_shrink;
if (0 > n) /* want signed compare as 'n' can be negative */
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
BLK_SEG(bs_ptr, (sm_uc_ptr_t)rp + next_rec_shrink, n);
}
if (0 == BLK_FINI(bs_ptr, bs1))
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
assert(bs1[0].len <= blk_reserved_size); /* Assert that right block has space for reserved bytes */
assert(gv_altkey->top == gv_currkey->top);
assert(gv_altkey->end < gv_altkey->top);
temp_key = gv_altkey;
if (cdb_sc_normal != (status = gvcst_expand_key((blk_hdr_ptr_t)buffaddr, prev_rec_offset,
temp_key)))
GOTO_RETRY;
} else
{ /* Insert in left hand (new) block */
if (!level_0)
{ /* In case of an index block, as long as the current record is not a *-record
* (i.e. last record in the block) and copying an extra record into the left
* block does not cause it to exceed the fill factor, copy an additional record.
* Not doing the extra record copy for index blocks (was the case pre-V54002) has
* been seen to create suboptimally filled index blocks (as low as 15% fillfactor)
* depending on the patterns of updates.
*/
assert(new_rec);
copy_extra_record = ((BSTAR_REC_SIZE != rec_size)
&& ((new_blk_size_l + BSTAR_REC_SIZE) <= blk_fill_size));
} else
{
copy_extra_record = ((0 == prev_rec_offset) && (NEWREC_DIR_LEFT == last_split_dir)
&& new_rec && (SIZEOF(blk_hdr) < cur_blk_size));
}
BLK_INIT(bs_ptr, bs1);
if (no_pointers)
left_hand_offset = 0;
else
{
left_hand_offset = curr_rec_offset + SIZEOF(rec_hdr);
if (level_0 || copy_extra_record)
left_hand_offset += target_key_size - prev_rec_match;
}
left_hand_index = ins_chain_index;
ins_chain_index = ins_chain_offset = 0;
BLK_SEG(bs_ptr, buffaddr + SIZEOF(blk_hdr), curr_rec_offset - SIZEOF(blk_hdr));
if (level_0)
{ /* After the initial split, will this record fit into the new left block?
* If not, this pass will make room and we will do another block split on the next pass.
*/
assert((blk_seg_cnt + SIZEOF(rec_hdr) + target_key_size - prev_rec_match + value.len)
== new_blk_size_l);
assert((new_blk_size_single <= new_blk_size_l) || (CDB_STAGNATE > t_tries));
assert((new_blk_size_single != new_blk_size_l)
|| ((0 == prev_rec_offset) && (SIZEOF(blk_hdr) == curr_rec_offset)));
assert((new_blk_size_single >= new_blk_size_l)
|| ((SIZEOF(blk_hdr) <= prev_rec_offset) && (SIZEOF(blk_hdr) < curr_rec_offset)));
if ((new_blk_size_l > blk_fill_size) && (new_blk_size_l > new_blk_size_single))
{ /* There is at least one existing record to the left of the split point.
* Do the initial split this pass and make an extra split next pass.
*/
need_extra_block_split = TRUE;
DEBUG_ONLY(dbg_trace_array[dbg_num_iters].is_extra_block_split = TRUE;)
} else
{
BLK_ADDR(curr_rec_hdr, SIZEOF(rec_hdr), rec_hdr);
curr_rec_hdr->rsiz = new_rec_size;
SET_CMPC(curr_rec_hdr, prev_rec_match);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)curr_rec_hdr, SIZEOF(rec_hdr));
BLK_ADDR(cp1, target_key_size - prev_rec_match, unsigned char);
memcpy(cp1, temp_key->base + prev_rec_match, target_key_size - prev_rec_match);
BLK_SEG(bs_ptr, cp1, target_key_size - prev_rec_match);
if (0 != value.len)
{
BLK_ADDR(va, value.len, char);
memcpy(va, value.addr, value.len);
BLK_SEG(bs_ptr, (unsigned char *)va, value.len);
}
if (copy_extra_record)
{
n = rec_size - curr_rec_match;
/* typecast needed below to enforce a "signed int" comparison */
if ((n + (signed int)curr_rec_offset + new_rec_size) > blk_fill_size)
copy_extra_record = FALSE;
else
{
BLK_ADDR(extra_rec_hdr, SIZEOF(rec_hdr), rec_hdr);
extra_rec_hdr->rsiz = n;
SET_CMPC(extra_rec_hdr, curr_rec_match);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)extra_rec_hdr, SIZEOF(rec_hdr));
if (n < (signed)SIZEOF(rec_hdr)) /* want signed compare */
{ /* as 'n' can be negative */
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
BLK_SEG(bs_ptr,
buffaddr + SIZEOF(blk_hdr) + SIZEOF(rec_hdr)
+ curr_rec_match,
n - SIZEOF(rec_hdr));
new_blk_size_l += n;
}
}
}
} else
{
if (copy_extra_record)
{
BLK_ADDR(curr_rec_hdr, SIZEOF(rec_hdr), rec_hdr);
curr_rec_hdr->rsiz = new_rec_size;
SET_CMPC(curr_rec_hdr, prev_rec_match);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)curr_rec_hdr, SIZEOF(rec_hdr));
BLK_ADDR(cp1, target_key_size - prev_rec_match, unsigned char);
memcpy(cp1, temp_key->base + prev_rec_match, target_key_size - prev_rec_match);
BLK_SEG(bs_ptr, cp1, target_key_size - prev_rec_match);
assert(value.len);
BLK_ADDR(va, value.len, char);
memcpy(va, value.addr, value.len);
BLK_SEG(bs_ptr, (unsigned char *)va, value.len);
new_blk_size_l += BSTAR_REC_SIZE;
} else
new_blk_size_l = curr_rec_offset + BSTAR_REC_SIZE;
BLK_ADDR(new_star_hdr, SIZEOF(rec_hdr), rec_hdr);
new_star_hdr->rsiz = BSTAR_REC_SIZE;
SET_CMPC(new_star_hdr, 0);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)new_star_hdr, SIZEOF(rec_hdr));
if (!copy_extra_record)
{
BLK_SEG(bs_ptr, (unsigned char *)&zeroes, SIZEOF(block_id));
} else
BLK_SEG(bs_ptr, (sm_uc_ptr_t)rp + rec_size - SIZEOF(block_id), SIZEOF(block_id));
}
new_blk_bs = bs1;
if (0 == BLK_FINI(bs_ptr, bs1))
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
/* We want to assert that the left block has enough space for reserved bytes but
* it is possible that it DOES NOT have enough space for reserved bytes if the pre-split
* block was previously populated with a very low reserved bytes setting and if the current
* reserved bytes setting is much higher than what the chosen split point would free up.
* This is an issue waiting to be fixed by C9K01-003221. Until then the following assert
* has to remain commented out.
*
* assert(bs1[0].len <= blk_reserved_size);
*/
/* assert that both !new_rec and copy_extra_record can never be TRUE at the same time */
assert(new_rec || !copy_extra_record);
if (!new_rec || copy_extra_record)
{ /* Should guard for empty block??? */
rp = (rec_hdr_ptr_t)((sm_uc_ptr_t)rp + rec_size);
rec_cmpc = EVAL_CMPC(rp);
temp_short = rec_size;
GET_USHORT(rec_size, &rp->rsiz);
}
if (copy_extra_record)
{
extra_record_orig_size = temp_short;
assert(gv_altkey->top == gv_currkey->top);
assert(gv_altkey->end < gv_altkey->top);
temp_key = gv_altkey;
if (cdb_sc_normal !=
(status = gvcst_expand_key((blk_hdr_ptr_t)buffaddr, curr_rec_offset, temp_key)))
GOTO_RETRY;
} else if (temp_key != gv_altkey)
{
memcpy(gv_altkey, temp_key, SIZEOF(gv_key) + temp_key->end);
temp_key = gv_altkey;
}
rec_size += rec_cmpc;
BLK_INIT(bs_ptr, bs1);
BLK_ADDR(next_rec_hdr, SIZEOF(rec_hdr), rec_hdr);
next_rec_hdr->rsiz = rec_size;
SET_CMPC(next_rec_hdr, 0);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)next_rec_hdr, SIZEOF(rec_hdr));
BLK_ADDR(cp1, rec_cmpc, unsigned char);
memcpy(cp1, temp_key->base, rec_cmpc);
BLK_SEG(bs_ptr, cp1, rec_cmpc);
n = cur_blk_size - INTCAST(((sm_uc_ptr_t)rp - buffaddr)) - SIZEOF(rec_hdr);
if (0 > n) /* want signed compare as 'n' can be negative */
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
BLK_SEG(bs_ptr, (sm_uc_ptr_t)(rp + 1), n);
if (0 == BLK_FINI(bs_ptr, bs1))
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
/* We want to assert that the right block has enough space for reserved bytes but
* it is possible that it DOES NOT have enough space for reserved bytes if the pre-split
* block was previously populated with a very low reserved bytes setting and if the current
* reserved bytes setting is much higher than what the chosen split point would free up.
* This is an issue waiting to be fixed by C9K01-003221. Until then the following assert
* has to remain commented out.
*
* assert(bs1[0].len <= blk_reserved_size);
*/
}
next_blk_index = t_create(blk_num, (uchar_ptr_t)new_blk_bs, left_hand_offset, left_hand_index, bh_level);
if (!no_pointers && dollar_tlevel)
{ /* there may be chains */
assert(new_rec);
curr_chain = *(off_chain *)&blk_num;
if (curr_chain.flag == 1)
tp_get_cw(si->first_cw_set, curr_chain.cw_index, &cse);
else
{
if (NULL != (tabent = lookup_hashtab_int4(si->blks_in_use, (uint4 *)&blk_num)))
tp_srch_status = tabent->value;
else
tp_srch_status = NULL;
cse = tp_srch_status ? tp_srch_status->cse : NULL;
}
assert(!cse || !cse->high_tlevel);
if ((NULL != cse) && (0 != cse->first_off))
{ /* there is an existing chain: fix to account for the split */
assert(NULL != cse->new_buff);
assert(cse->done);
assert(0 == cse->next_off);
cse_new = si->last_cw_set;
assert(!cse_new->high_tlevel);
assert(0 == cse_new->next_off);
assert(0 == cse_new->first_off);
assert(cse_new->ins_off == left_hand_offset);
assert(cse_new->index == left_hand_index);
assert(cse_new->level == cse->level);
cse_first_off = (int4)cse->first_off;
offset_sum = cse_first_off;
curr = buffaddr + offset_sum;
GET_LONGP(&curr_chain, curr);
assert(curr_chain.flag == 1);
last_possible_left_offset = curr_rec_offset + extra_record_orig_size - SIZEOF(off_chain);
/* some of the following logic used to be in tp_split_chain which was nixed */
if (offset_sum <= last_possible_left_offset)
{ /* the split falls within or after the chain; otherwise entire chain stays right */
assert((cse_first_off < curr_rec_offset)
|| (cse_first_off == last_possible_left_offset));
if (left_hand_offset && (curr_rec_offset < cse_first_off))
{ /* We are inserting the new record (with the to-be-filled child block
* number) AND an extra record in the left block and the TP block
* chain of the block to be split starts AFTER the new record's offset
* in the current block. This means the left block (cse_new) will have a
* block chain starting with the newly inserted record's block pointer.
*/
cse_new->first_off = left_hand_offset;
} else
{
cse_new->first_off = cse_first_off;
assert(0 == cse_new->next_off);
}
if (level_0) /* if no *-key issue stop after, rather than at, a match */
last_possible_left_offset += SIZEOF(off_chain);
if (offset_sum < last_possible_left_offset)
{ /* it's not an immediate hit */
for ( ; ; curr += curr_chain.next_off, GET_LONGP(&curr_chain, curr))
{ /* follow chain upto split point */
assert(1 == curr_chain.flag);
if (0 == curr_chain.next_off)
break;
offset_sum += curr_chain.next_off;
if (offset_sum >= last_possible_left_offset)
break;
} /* end of search chain loop */
}
assert(curr >= (buffaddr + cse_first_off));
if (level_0) /* restore match point to "normal" */
last_possible_left_offset -= SIZEOF(off_chain);
if ((offset_sum == last_possible_left_offset) && !level_0)
{ /* The last record in the left side of the pre-split block is where
* the search stopped. If no extra record copy was done, then this
* record will end up BEFORE the inserted record in the post-split
* left block. Otherwise this will be AFTER the inserted record.
*
* In case of copy_extra_record, the extra record will become the *-key
* ---|------------v-----------------v
* [blk_hdr]...[curr rec( )][new rec ( )] [extra rec (*-key)]
*
* In case of no extra record copy, the new record will become the *-key
* ---|-------------------v
* [blk_hdr]...[curr rec( )][new rec (*-key)( )]
*
* Take this into account during the calculations below.
*/
assert(cse_first_off <= last_possible_left_offset);
if (left_hand_offset)
{
assert(!ins_chain_offset);
if (!extra_record_orig_size && (offset_sum != cse_first_off))
{ /* bring curr up to the match */
curr += curr_chain.next_off;
GET_LONGP(&curr_chain, curr);
}
curr_offset = curr - buffaddr;
undo_index = 0;
if (curr_offset < curr_rec_offset)
{ /* The chain starts before the curr_rec_offset. Fix
* next_off field from the last element in the chain
* before this offset.
*/
prev_chain = curr_chain;
assert(extra_record_orig_size
|| (BSTAR_REC_SIZE
== (left_hand_offset - curr_offset)));
prev_chain.next_off = left_hand_offset - curr_offset;
assert((curr_offset + prev_chain.next_off)
<= (new_blk_size_l - SIZEOF(off_chain)));
if (dollar_tlevel != cse->t_level)
{
assert(dollar_tlevel > cse->t_level);
assert(!cse->undo_next_off[0]
&& !cse->undo_offset[0]);
assert(!cse->undo_next_off[1]
&& !cse->undo_offset[1]);
cse->undo_next_off[0] = curr_chain.next_off;
cse->undo_offset[0] = (block_offset)curr_offset;
undo_index = 1;
}
GET_LONGP(curr, &prev_chain);
}
if (extra_record_orig_size)
{
if (offset_sum != cse_first_off)
{ /* bring curr up to the match */
curr += curr_chain.next_off;
curr_offset += curr_chain.next_off;
GET_LONGP(&curr_chain, curr);
}
if (dollar_tlevel != cse->t_level)
{
assert(dollar_tlevel > cse->t_level);
assert(!cse->undo_next_off[undo_index] &&
!cse->undo_offset[undo_index]);
cse->undo_next_off[undo_index] =
curr_chain.next_off;
cse->undo_offset[undo_index] =
(block_offset)curr_offset;
}
prev_chain = curr_chain;
prev_chain.next_off = 0;
GET_LONGP(curr, &prev_chain);
cse_new->next_off = BSTAR_REC_SIZE;
}
offset_sum += curr_chain.next_off;
} else
{
undo_index = 0;
/* the last record turns into the *-key */
if (offset_sum == cse_first_off)
{ /* it's all there is */
/* first_off --------------------v
* [blk_hdr]...[curr rec (*-key)( )] */
assert(prev_rec_offset >= SIZEOF(blk_hdr));
cse_new->first_off = (block_offset)(prev_rec_offset +
SIZEOF(rec_hdr));
} else
{ /* update the next_off of the previous chain record */
/* ---|--------------------v
* [blk_hdr]...[prev rec( )][curr rec (*-key)( )] */
assert((buffaddr + prev_rec_offset) > curr);
prev_chain = curr_chain;
assert((offset_sum - prev_chain.next_off) /* check old */
== (curr - buffaddr)); /* method equivalent */
prev_chain.next_off = (unsigned int)(
(prev_rec_offset + (unsigned int)(SIZEOF(rec_hdr))
- (curr - buffaddr)));
assert((curr - buffaddr + prev_chain.next_off)
<= ((new_blk_size_l < blk_reserved_size
? new_blk_size_l : blk_reserved_size)
- SIZEOF(off_chain)));
if (dollar_tlevel != cse->t_level)
{
assert(dollar_tlevel > cse->t_level);
assert(!cse->undo_next_off[0]
&& !cse->undo_offset[0]);
assert(!cse->undo_next_off[1]
&& !cse->undo_offset[1]);
cse->undo_next_off[0] = curr_chain.next_off;
cse->undo_offset[0] = (block_offset)(curr -
buffaddr);
undo_index = 1;
}
GET_LONGP(curr, &prev_chain);
/* bring curr up to the match */
curr += curr_chain.next_off;
GET_LONGP(&curr_chain, curr);
}
offset_sum += curr_chain.next_off;
if (dollar_tlevel != cse->t_level)
{
assert(dollar_tlevel > cse->t_level);
assert(!cse->undo_next_off[undo_index] &&
!cse->undo_offset[undo_index]);
cse->undo_next_off[undo_index] = curr_chain.next_off;
cse->undo_offset[undo_index] = (block_offset)(curr -
buffaddr);
}
curr_chain.next_off = 0;
GET_LONGP(curr, &curr_chain);
}
} else
{ /* found the split and no *-key issue: just terminate before the split */
if (offset_sum == cse_first_off)
offset_sum += curr_chain.next_off; /* put it in the lead */
old_curr_chain_next_off = curr_chain.next_off;
if (left_hand_offset)
{ /* there's a new chain rec in left */
curr_offset = curr - buffaddr;
if (extra_record_orig_size
&& (curr_offset == last_possible_left_offset))
{
assert(level_0); /* else *-key issues */
cse_new->next_off = extra_record_orig_size
- next_rec_shrink1;
}
assert(!ins_chain_offset);
/* put the new one at the end of the chain */
/* ---|---------------v
* [blk_hdr]...[curr rec( )]...[new rec ( )] */
/* the new rec may or may not be a *-key */
assert((offset_sum - curr_chain.next_off) == curr_offset);
assert(left_hand_offset > curr_offset);
curr_chain.next_off = (block_offset)(left_hand_offset
- curr_offset);
} else
curr_chain.next_off = 0;
assert((curr - buffaddr + curr_chain.next_off)
<= ((new_blk_size_l < blk_reserved_size
? new_blk_size_l : blk_reserved_size) - SIZEOF(off_chain)));
if (dollar_tlevel != cse->t_level)
{
assert(dollar_tlevel > cse->t_level);
assert(!cse->undo_next_off[0] && !cse->undo_offset[0]);
assert(!cse->undo_next_off[1] && !cse->undo_offset[1]);
cse->undo_next_off[0] = old_curr_chain_next_off;
cse->undo_offset[0] = (block_offset)(curr - buffaddr);
}
GET_LONGP(curr, &curr_chain);
} /* end of *-key or not alternatives */
assert((left_hand_offset + (int)cse_new->next_off) <=
((new_blk_size_l < blk_reserved_size ? new_blk_size_l : blk_reserved_size)
- SIZEOF(off_chain)));
} /* end of buffer and cse_new adjustments */
prev_first_off = cse_first_off;
if (ins_chain_offset)
{ /* if there is a new chain rec in the old block, put it first */
/* first_off---------v
* [blk_hdr][new rec( )]... */
assert(!left_hand_offset);
assert(0 == extra_record_orig_size);
assert(ins_chain_offset >= (SIZEOF(blk_hdr) + SIZEOF(rec_hdr)));
cse->first_off = ins_chain_offset;
assert(0 == cse->next_off);
if (offset_sum > last_possible_left_offset)
{ /* there are existing chain records after the split */
/* first_off---------v--------------------v
* [blk_hdr][new rec( )]...[existing rec ( )] */
prev_next_off = cse->next_off;
cse->next_off = offset_sum - last_possible_left_offset - next_rec_shrink1;
assert((int)(cse->next_off + ins_chain_offset) < new_blk_size_r);
}
} else if (offset_sum <= last_possible_left_offset)
{ /* the last chain record went left with the split */
cse->first_off = 0;
} else
{ /* just adjust the anchor for the split */
/* first_off------------------v
* [blk_hdr]...[existing rec ( )] */
assert(offset_sum >= (int)cse_first_off);
cse->first_off = (block_offset)(offset_sum - last_possible_left_offset + rec_cmpc
+ SIZEOF(blk_hdr) - SIZEOF(off_chain));
assert(cse->first_off >= (SIZEOF(blk_hdr) + SIZEOF(rec_hdr)));
}
assert((ins_chain_offset + (int)cse->next_off) <=
((new_blk_size_r < blk_reserved_size ? new_blk_size_r : blk_reserved_size)
- SIZEOF(off_chain)));
} /* end of of split processing */
} /* end of tp only code */
if (!dollar_tlevel)
cse = NULL;
else
{
cse_new = si->last_cw_set;
assert(!cse_new->high_tlevel);
gvcst_blk_build(cse_new, NULL, 0);
cse_new->done = TRUE;
}
/* Record block split heuristic info that will be used in next block split */
if (!new_rec_goes_to_right)
{
chain1.flag = 1;
chain1.cw_index = next_blk_index;
chain1.next_off = 0;
assert(SIZEOF(gv_target->last_split_blk_num[bh_level]) == SIZEOF(off_chain));
last_split_blk_num[bh_level] = *(block_id *)&chain1;
} else
last_split_blk_num[bh_level] = blk_num;
assert(temp_key == gv_altkey);
/* If new_rec_goes_to_right is TRUE, then it almost always implies that the left side of
* the block is almost full (i.e. adding the new record there caused it to exceed the fill
* factor) therefore direct all future updates to keys in between (which lie between the
* last key of the left block and the first key of the right block) to the right block.
*
* If not, direct those updates to the left block thereby preventing it from staying at a
* low capacity for a long period of time.
*
* This direction of future updates is implemented by controlling what key gets passed for
* record addition into the parent index block. For directing all in-between updates to the
* right block, pass in the last key of the left block to the parent index block. For directing
* all in-between updates to the left block, back off 1 spot from the first key of the right
* block and pass that to the parent index block.
*
* Doing this backoff accurately would imply finding the last non-zero byte in the key and taking
* 1 off from it. In case the length of the right key is less than the left key, it is possible
* that this backoff causes the new key to be less than even the left key (e.g. if left side has
* "C2 13 93 00" as key sequence corresponding to the number 1292 and right side has "C2 14 00"
* corresponding to the number 1300, taking one off the right side would give "C2 13 00" which corresponds
* to the number 12 and is lesser than the left side). In this case, we would have to start adding in
* FF bytes to the key as much as possible until we reached the left key length. In the above example,
* we would get "C2 13 FF 00".
*
* In the end, because of the complexities involved in getting an accurate backoff (see above paragraph),
* we instead implement a simplified backoff by examining just the first byte that differs and the
* immediately following byte (if needed). If it turns out that we cannot get a backoff with just
* those 2 bytes (should be rare), we then let the left key go unmodified. In such cases, we expect
* not many intervening possible keys and and therefore it does not matter that much whether we pass
* the left or (right-1) key to the parent.
*
* There are two additional cases in which we let the left key go unmodified: 1) if the backoff would
* result in a key larger than max_key_size and 2) if the left key ends in "00 00" and the right key ends
* in "00 01 ... ". Backing off the 01 would give a index key with "00 00" in the middle.
*
* temp_key already holds the key corresponding to the last record of the left block.
* bs1[2] and bs1[3] hold the key corresponding to the first record of the right block.
*/
if (level_0)
{ /* Determine key for record to pass on to parent index block */
cp1 = temp_key->base;
assert(KEY_DELIMITER != *temp_key->base);
cp2 = (unsigned char *)bs1[2].addr;
bs1_2_len = bs1[2].len;
for (i = 0; (i < bs1_2_len) && (*cp2 == *cp1); ++i)
{
++cp2;
++cp1;
}
if (i == bs1_2_len)
{
cp2 = (unsigned char *)bs1[3].addr;
bs1_3_len = bs1[3].len;
for (j = 0; (j < bs1_3_len) && (*cp2 == *cp1); ++j)
{
++cp2;
++cp1;
}
}
n = (int)((sm_long_t)*cp2 - (sm_long_t)*cp1);
if (0 > n)
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
} else if (1 < n)
{
temp_key->end = cp1 - temp_key->base + 2;
if (temp_key->end < temp_key->top)
{
*cp1++ += (!new_rec_goes_to_right ? (n - 1) : 1);
*cp1++ = 0;
*cp1 = 0;
} else
{
temp_key->end = temp_key->prev;
assert(temp_key->end < temp_key->top);
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
} else if (1 == n)
{
cp1++;
start_len = cp1 - temp_key->base + 2;
if (start_len < temp_key->top)
{
if (i == (bs1_2_len - 1))
cp2 = (unsigned char *)bs1[3].addr;
else
cp2++;
if (((KEY_DELIMITER != *(cp1 - 1)) || (KEY_DELIMITER != *(cp1 - 2)))
&& ((STR_SUB_MAXVAL != *cp1) || (KEY_DELIMITER != *cp2))
&& (gv_cur_region->max_key_size > start_len))
{
if (!new_rec_goes_to_right)
{
old_ch = *cp2;
new_ch = old_ch - 1;
*cp1 = new_ch;
if (KEY_DELIMITER != old_ch)
*(cp1 - 1) = *(cp2 - 1);
} else
{
old_ch = *cp1;
new_ch = old_ch + 1;
*cp1 = new_ch;
if (STR_SUB_MAXVAL == old_ch)
*(cp1 - 1) = *(cp2 - 1);
}
cp1++;
if (KEY_DELIMITER == new_ch)
temp_key->end--;
else
*cp1++ = KEY_DELIMITER;
*cp1 = KEY_DELIMITER;
temp_key->end = cp1 - temp_key->base;
}
} else
{
temp_key->end = temp_key->prev;
assert(temp_key->end < temp_key->top);
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
}
}
assert(temp_key->end < temp_key->top);
assert(1 <= temp_key->end);
assert(KEY_DELIMITER == temp_key->base[temp_key->end]);
assert(KEY_DELIMITER == temp_key->base[temp_key->end - 1]);
assert((2 > temp_key->end) || (KEY_DELIMITER != temp_key->base[temp_key->end - 2]));
bq = bh + 1;
if (HIST_TERMINATOR != bq->blk_num)
{ /* Not root; write blocks and continue */
if (cdb_sc_normal != (status = gvcst_search_blk(temp_key, bq)))
GOTO_RETRY;
/* It's necessary to disable the indexmod optimization for splits of index blocks. Refer to
* GTM-7353, C9B11-001813 (GTM-3984), and C9H12-002934 (GTM-6104).
*/
cse = t_write(bh, (unsigned char *)bs1, ins_chain_offset, ins_chain_index, bh_level,
TRUE, FALSE, (level_0) ? GDS_WRITE_PLAIN : GDS_WRITE_KILLTN);
assert(!dollar_tlevel || !cse->high_tlevel);
if (cse)
{
assert(dollar_tlevel);
cse->write_type |= GDS_WRITE_BLOCK_SPLIT;
}
value.len = SIZEOF(block_id);
value.addr = (char *)&zeroes;
++bh;
ins_chain_index = next_blk_index;
} else
{ /* Create new root */
if ((bh_level + 1) == MAX_BT_DEPTH)
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_maxlvl;
GOTO_RETRY;
}
ins_chain_index = t_create(blk_num, (uchar_ptr_t)bs1, ins_chain_offset, ins_chain_index, bh_level);
make_it_null = FALSE;
if (NULL != cse)
{ /* adjust block to use the buffer and offsets worked out for the old root */
assert(cse->done);
assert(NULL != cse->new_buff);
cse_new = si->last_cw_set;
assert(!cse_new->high_tlevel);
cse_new->blk_target = cse->blk_target;
cse_new->first_off = cse->first_off;
cse_new->next_off = cse->next_off;
/* to be able to incrementally rollback, we need another copy of new_buff,
* pointer copying wouldn't suffice
*/
cse_new->new_buff = (unsigned char *)get_new_free_element(si->new_buff_list);
memcpy(cse_new->new_buff, cse->new_buff, ((blk_hdr_ptr_t)cse->new_buff)->bsiz);
cse_new->old_block = NULL;
make_it_null = TRUE;
}
/* Build the right child of the new root right now since it is possible that before commit the
* root block may have been recycled in the global buffer which wouldn't cause a restart since
* it has been built already (see the gvcst_blk_build below). Otherwise, we may be relying
* on incorrect data in the root block when we build this right child finally in bg_update.
* Note that this needs to be done only in TP since only tp_tend allows for a block with a
* cse not to be in the global buffer if a new_buff already exists.
*/
if (dollar_tlevel)
{
DEBUG_ONLY(tp_get_cw(si->first_cw_set, ins_chain_index, &cse_new);)
assert(cse_new == si->last_cw_set);
cse_new = si->last_cw_set;
assert(FALSE == cse_new->done);
assert(!cse_new->high_tlevel);
gvcst_blk_build(cse_new, NULL, 0);
cse_new->done = TRUE;
}
target_key_size = temp_key->end + 1;
BLK_INIT(bs_ptr, bs1);
BLK_ADDR(curr_rec_hdr, SIZEOF(rec_hdr), rec_hdr);
curr_rec_hdr->rsiz = target_key_size + SIZEOF(rec_hdr) + SIZEOF(block_id);
SET_CMPC(curr_rec_hdr, 0);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)curr_rec_hdr, SIZEOF(rec_hdr));
BLK_ADDR(cp1, target_key_size, unsigned char);
memcpy(cp1, temp_key->base, target_key_size);
BLK_SEG(bs_ptr, cp1, target_key_size);
BLK_SEG(bs_ptr, (unsigned char *)&zeroes, SIZEOF(block_id));
BLK_ADDR(next_rec_hdr, SIZEOF(rec_hdr), rec_hdr);
next_rec_hdr->rsiz = BSTAR_REC_SIZE;
SET_CMPC(next_rec_hdr, 0);
BLK_SEG(bs_ptr, (sm_uc_ptr_t)next_rec_hdr, SIZEOF(rec_hdr));
BLK_SEG(bs_ptr, (unsigned char *)&zeroes, SIZEOF(block_id));
if (0 == BLK_FINI(bs_ptr, bs1))
{
assert(CDB_STAGNATE > t_tries);
status = cdb_sc_mkblk;
GOTO_RETRY;
}
assert(bs1[0].len <= blk_reserved_size); /* Assert that new block has space for reserved bytes */
ins_off1 = (block_offset)(SIZEOF(blk_hdr) + SIZEOF(rec_hdr) + target_key_size);
ins_off2 = (block_offset)(SIZEOF(blk_hdr) + (2 * SIZEOF(rec_hdr)) + SIZEOF(block_id) +
target_key_size);
assert(ins_off1 < ins_off2);
/* Since a new root block is not created but two new children are created, this update to the
* root block should disable the "indexmod" optimization (C9B11-001813).
*/
cse = t_write(bh, (unsigned char *)bs1, ins_off1, next_blk_index,
bh_level + 1, TRUE, FALSE, GDS_WRITE_KILLTN);
if (make_it_null)
cse->new_buff = NULL;
assert(!dollar_tlevel || !cse->high_tlevel);
if (!dollar_tlevel)
{ /* create a sibling cw-set-element to store ins_off2/ins_chain_index */
t_write_root(ins_off2, ins_chain_index);
} else
{
cse->write_type |= GDS_WRITE_BLOCK_SPLIT;
assert(NULL == cse->new_buff);
cse->first_off = 0;
cse->next_off = ins_off2 - ins_off1;
/* the following is the only place where the buffer is not completely built by
* gvcst_blk_build. this means that the block chain seen by gvcst_blk_build will
* have a bad value (that is fixed below) at the end of the list. therefore the
* block chain integrity checking code in gvcst_blk_build will error out normally
* in this case. signal that routine to skip checking just this tail element.
*/
DEBUG_ONLY(skip_block_chain_tail_check = TRUE;)
gvcst_blk_build(cse, NULL, 0);
DEBUG_ONLY(skip_block_chain_tail_check = FALSE;)
curr_chain.flag = 1;
curr_chain.cw_index = ins_chain_index;
curr_chain.next_off = 0;
curr = cse->new_buff + ins_off2;
GET_LONGP(curr, &curr_chain);
cse->done = TRUE;
gv_target->clue.end = 0;
}
succeeded = TRUE;
}
}
}
assert(succeeded);
horiz_growth = FALSE;
assert((csa->dir_tree == gv_target) || tp_root);
RESET_GV_TARGET_LCL_AND_CLR_GBL(save_targ, DO_GVT_GVKEY_CHECK);
/* The only case where gv_target is still csa->dir_tree after the above RESET macro is if op_gvput was invoked
* with gv_target being set to cs_addrs->dir_tree. In that case gbl_target_was_set would have been set to TRUE. Assert.
*/
assert((csa->dir_tree != gv_target) || gbl_target_was_set);
/* Format the journal records only once for non-TP (irrespective of number of restarts).
* We remember this through the variable "jnl_format_done". If TRUE, we do not redo the jnl_format.
* The only exception is if we are in $INCREMENT in which case we need to reformat since the
* current value (and hence the post-increment value) of the key might be different in different tries.
* In this case, the restart code checks and resets "jnl_format_done" to FALSE.
*/
if (!dollar_tlevel)
{
nodeflags = 0;
if (skip_dbtriggers)
nodeflags |= JS_SKIP_TRIGGERS_MASK;
if (duplicate_set)
nodeflags |= JS_IS_DUPLICATE;
assert(!jnl_format_done || !is_dollar_incr && (JNL_SET == non_tp_jfb_ptr->ja.operation));
if (need_extra_block_split)
inctn_opcode = inctn_gvcstput_extra_blk_split;
else if (JNL_WRITE_LOGICAL_RECS(csa) && !jnl_format_done)
{
jfb = jnl_format(JNL_SET, gv_currkey, (!is_dollar_incr ? val_forjnl : post_incr_mval), nodeflags);
assert(NULL != jfb);
jnl_format_done = TRUE;
}
succeeded = ((trans_num)0 != t_end(&gv_target->hist, dir_hist, TN_NOT_SPECIFIED));
inctn_opcode = inctn_invalid_op;
if (succeeded)
{
if (NULL != dir_hist)
{ /* The Global Variable Tree was created in this transaction. So clear its gv_target to be safe.
* The directory tree though will have a non-zero value and that can stay as it is since it
* was validated in this transaction and was found good enough for us to commit.
*/
assert(dir_tree != gv_target);
gv_target->clue.end = 0;
}
} else
{ /* "t_retry" would have already been invoked by "t_end".
* So instead of going to "retry:", do only whatever steps from there are necessary here.
*/
RESTORE_ZERO_GVT_ROOT_ON_RETRY(lcl_root, gv_target, dir_hist, dir_tree);
/*if (is_dollar_incr)*/
jnl_format_done = FALSE; /* need to reformat jnl records for $INCR even in case of non-TP */
GTMTRIG_DBG_ONLY(dbg_trace_array[dbg_num_iters].retry_line = __LINE__);
goto tn_restart;
}
} else
{
status = tp_hist(dir_hist);
if (NULL != dir_hist)
{ /* Note that although "tp_hist" processes the "dir_hist" history, it only adds "gv_target" to gvt_tp_list.
* But csa->dir_tree might have had clue, blk-split related info etc. modified as part of this
* gvcst_put invocation that might also need cleanup (just like any other gv_target) so add
* csa->dir_tree to gvt_tp_list (if not already done).
*/
assert(dir_tree == csa->dir_tree);
ADD_TO_GVT_TP_LIST(dir_tree); /* note: macro also updates read_local_tn if necessary */
}
if (cdb_sc_normal != status)
GOTO_RETRY;
jnl_format_done = !needfmtjnl;
}
if (succeeded)
{
if (0 == tp_root)
{ /* Fill in gv_target->root with newly created root block value.
* Previously, root remained at 0 at the end of the transaction and it was left to the
* NEXT transaction to do a gvcst_root_search and determine the new root block.
* This was fine until recently when op_gvrectarg was reworked to NOT do a gvcst_root_search
* (to avoid potential TP restarts while unwinding the M stack). This meant that gv_target->root
* needed to be kept uptodate as otherwise it was possible for gv_target->root to be stale
* after a op_gvrectarg causing incorrect behavior of following M code (see v52000/C9B10001765
* subtest for example where $order(^gvn,$$extrinsic) is done and extrinsic CREATES <^gvn>).
*/
GTMTRIG_ONLY(assert(!ztval_gvcst_put_redo);)
assert(0 == gv_target->root);
if (!dollar_tlevel)
{
tp_root = cw_set[root_blk_cw_index].blk;
assert(gds_t_acquired == cw_set[root_blk_cw_index].old_mode);
assert(gds_t_committed == cw_set[root_blk_cw_index].mode);
assert(!IS_BITMAP_BLK(tp_root));
} else
{
chain1.flag = 1;
chain1.cw_index = root_blk_cw_index;
chain1.next_off = 0; /* does not matter what value we set this field to */
assert(SIZEOF(tp_root) == SIZEOF(chain1));
tp_root = *(block_id *)&chain1;
}
gv_target->root = tp_root;
}
if (need_extra_block_split)
{ /* The logical update required an extra block split operation first (which succeeded) so
* get back to doing the logical update before doing any trigger invocations etc.
*/
GTMTRIG_ONLY(skip_hasht_read = (dollar_tlevel) ? TRUE : skip_hasht_read;)
goto fresh_tn_start;
}
for (bh_level = 0; bh_level < split_depth; bh_level++)
{
blk_num = last_split_blk_num[bh_level];
assert(0 != blk_num);
split_targ->last_split_blk_num[bh_level] = blk_num;
assert((NEWREC_DIR_FORCED == last_split_direction[bh_level])
|| (NEWREC_DIR_LEFT == last_split_direction[bh_level])
|| (NEWREC_DIR_RIGHT == last_split_direction[bh_level]));
split_targ->last_split_direction[bh_level] = last_split_direction[bh_level];
/* Fix blk_num if it was created in this transaction. In case of non-TP, we have the real block number
* corresponding to the created block. In case of TP, we can know that only at tp_clean_up time so defer.
*/
chain1 = *(off_chain *)&blk_num;
if (chain1.flag)
{
if (!dollar_tlevel)
{
assert(chain1.cw_index < ARRAYSIZE(cw_set));
split_targ->last_split_blk_num[bh_level] = cw_set[chain1.cw_index].blk;
} else
split_targ->split_cleanup_needed = TRUE;/* phantom blk# will be fixed at tp_clean_up time */
}
}
if (dollar_tlevel)
{
nodeflags = 0;
if (skip_dbtriggers)
nodeflags |= JS_SKIP_TRIGGERS_MASK;
if (duplicate_set)
nodeflags |= JS_IS_DUPLICATE;
ja_val = (!is_dollar_incr ? val_forjnl : post_incr_mval);
write_logical_jnlrecs = JNL_WRITE_LOGICAL_RECS(csa);
# ifdef GTM_TRIGGER
if (!skip_dbtriggers && parms->enable_trigger_read_and_fire)
{
/* Since we are about to invoke the trigger, we better have gv_target->gvt_trigger and
* the local variable gvt_trigger in sync. The only exception is when we are here because
* of a $ztvalue update and redoing the gvcst_put. In this case, it's possible that
* the trigger code that was previously executed deleted the trigger and did an update
* on the global which would have set gv_target->gvt_trigger to NULL. Assert accordingly.
*/
assert(ztval_gvcst_put_redo || (gvt_trigger == gv_target->gvt_trigger));
if ((NULL != gvt_trigger) && !ztval_gvcst_put_redo)
{
assert(dollar_tlevel);
/* Format ZTWORM and SET journal records.
* "ztworm_jfb", "jfb" and "jnl_format_done" are set by the below macro.
*/
JNL_FORMAT_ZTWORM_IF_NEEDED(csa, write_logical_jnlrecs,
JNL_SET, gv_currkey, ja_val, ztworm_jfb, jfb, jnl_format_done);
/* Initialize trigger parms that dont depend on the context of the matching trigger */
trigparms.ztoldval_new = key_exists ? ztold_mval : (mval *)&literal_null;
PUSH_MV_STENT(MVST_MVAL); /* protect $ztval from stp_gcol */
ztval_mval = &mv_chain->mv_st_cont.mvs_mval;
if (!is_dollar_incr)
*ztval_mval = *val_forjnl;
else
{
*ztval_mval = *post_incr_mval;
/* Since this is pointing to malloced buffer, we need to repoint it to stringpool
* to avoid a nested trigger call (that does a $INCR) from overwriting this buffer.
* This way buffers corresponding to $ztvals of nested triggers can coexist.
*/
s2pool(&ztval_mval->str);
}
trigparms.ztvalue_new = ztval_mval;
trigparms.ztdata_new = key_exists ? &literal_one : &literal_zero;
gvtr_parms.gvtr_cmd = GVTR_CMDTYPE_SET;
gvtr_parms.gvt_trigger = gvt_trigger;
/* Now that we have filled in minimal information, let "gvtr_match_n_invoke" do the rest */
gtm_trig_status = gvtr_match_n_invoke(&trigparms, &gvtr_parms);
assert((0 == gtm_trig_status) || (ERR_TPRETRY == gtm_trig_status));
if (ERR_TPRETRY == gtm_trig_status)
{ /* A restart has been signaled that we need to handle or complete the handling of.
* This restart could have occurred reading the trigger in which case no
* tp_restart() has yet been done or it could have occurred in trigger code in
* which case we need to finish the incomplete tp_restart. In both cases this
* must be an implicitly TP wrapped transaction. Our action is to complete the
* necessary tp_restart() logic (t_retry is already completed so should be skipped)
* and then re-do the gvcst_put logic.
*/
assert(lcl_implicit_tstart || lcl_span_status);
assert(CDB_STAGNATE >= t_tries);
status = cdb_sc_normal; /* signal "retry:" to avoid t_retry call */
GOTO_RETRY;
}
REMOVE_ZTWORM_JFB_IF_NEEDED(ztworm_jfb, jfb, si);
if (trigparms.ztvalue_changed)
{ /* At least one of the invoked triggers changed $ztval.
* Redo the gvcst_put with $ztval as the right side of the SET.
* Also make sure gtm_trigger calls are NOT done this time around.
*/
assert(0 < gvtr_parms.num_triggers_invoked);
val = trigparms.ztvalue_new;
val_forjnl = trigparms.ztvalue_new;
MV_FORCE_STR(val); /* in case the updated value happens to be a numeric quantity */
fits = RECORD_FITS_IN_A_BLOCK(val, gv_currkey, blk_size, blk_reserved_bytes);
if (!fits)
{ /* If val is now too big to fit in a block, we need to back out into
* gvcst_put and try again with spanning nodes. This means we should
* OP_TROLLBACK if lcl_implicit_tstart.
*/
if (lcl_implicit_tstart)
{
POP_MVALS_FROM_M_STACK_IF_NEEDED(ztold_mval, save_msp,
save_mv_chain);
OP_TROLLBACK(-1);
assert(!lcl_span_status);
parms->span_status = TRUE;
} else
{
parms->ztval_gvcst_put_redo = TRUE;
parms->ztval_mval = val;
}
RESET_GV_TARGET_LCL_AND_CLR_GBL(save_targ, DO_GVT_GVKEY_CHECK);
return;
}
ztval_gvcst_put_redo = TRUE;
skip_hasht_read = TRUE;
/* In case, the current gvcst_put invocation was for $INCR, reset the corresponding
* global variable that indicates a $INCR is in progress since the redo of the
* gvcst_put is a SET command (no longer $INCR).
*/
is_dollar_incr = FALSE;
/* Dont pop the mvals as we want ztval_mval (which points to the mval containing
* "val" for the redo iteration) protected-from-stp_gcol/accessible until the
* redo is complete.
*/
goto fresh_tn_start;
}
}
/* We don't want to pop mvals yet if we still need to set chunks of ztval */
POP_MVALS_FROM_M_STACK_IF_REALLY_NEEDED(lcl_span_status, ztold_mval, save_msp, save_mv_chain);
/* pop any stacked mvals before op_tcommit as it does its own popping */
}
# endif
if (write_logical_jnlrecs && !jnl_format_done)
{
assert(dollar_tlevel);
# ifdef GTM_TRIGGER
/* Do not replicate implicit update or $ztval redo update */
assert(tstart_trigger_depth <= gtm_trigger_depth);
if ((gtm_trigger_depth > tstart_trigger_depth) || ztval_gvcst_put_redo)
{
/* Ensure that JS_SKIP_TRIGGERS_MASK and JS_NOT_REPLICATED_MASK are mutually exclusive. */
assert(!(nodeflags & JS_SKIP_TRIGGERS_MASK));
nodeflags |= JS_NOT_REPLICATED_MASK;
}
# endif
jfb = jnl_format(JNL_SET, gv_currkey, ja_val, nodeflags);
assert(NULL != jfb);
jnl_format_done = TRUE;
}
# ifdef GTM_TRIGGER
/* Go ahead with commit of any implicit TP wrapped transaction */
if (lcl_implicit_tstart)
{
GVTR_OP_TCOMMIT(status);
if (cdb_sc_normal != status)
GOTO_RETRY;
}
# endif
}
assert(!JNL_WRITE_LOGICAL_RECS(csa) || jnl_format_done);
/* Now that the SET/$INCR is finally complete, increment the corresponding GVSTAT counter */
if (!lcl_span_status)
INCR_GVSTATS_COUNTER(csa, cnl, n_set, 1);
DBG_CHECK_VAL_AT_FUN_EXIT;
assert(lcl_dollar_tlevel == dollar_tlevel);
return;
}
retry:
/* Note that it is possible cs_addrs is not equal to csa at this point in case we restarted due to trigger
* invocations and in case those triggers referenced globals in different regions. But this should be fixed
* by a call to t_retry/tp_restart below (it does a TP_CHANGE_REG(tp_pointer->gd_reg)).
*/
# ifdef GTM_TRIGGER
if (lcl_implicit_tstart)
{
assert(!skip_dbtriggers);
assert(!skip_INVOKE_RESTART);
assert((cdb_sc_normal != status) || (ERR_TPRETRY == gtm_trig_status));
if (cdb_sc_normal != status)
skip_INVOKE_RESTART = TRUE; /* causes t_retry to invoke only tp_restart without any rts_error */
/* else: t_retry has already been done by gtm_trigger so no need to do it again for this try */
/* If an implicitly TP wrapped transaction is restarting, restore things to what they were
* at entry into gvcst_put. Note that we could have done multiple iterations of gvcst_put for
* extra_block_split/retry/ztval_gvcst_put_redo.
*/
ztval_gvcst_put_redo = FALSE;
skip_hasht_read = FALSE;
val = lcl_val;
val_forjnl = lcl_val_forjnl;
/* $increment related fields need to be restored */
is_dollar_incr = lcl_is_dollar_incr;
post_incr_mval = lcl_post_incr_mval;
increment_delta_mval = lcl_increment_delta_mval;
}
# endif
assert((cdb_sc_normal != status) GTMTRIG_ONLY(|| lcl_implicit_tstart || lcl_span_status));
if (cdb_sc_normal != status)
{ /* Need to restart. If directory tree was used in this transaction, nullify its clue as well (not normally
* done by t_retry). The RESTORE_ZERO_GVT_ROOT_ON_RETRY macro call below takes care of that for us.
*/
RESET_GV_TARGET_LCL_AND_CLR_GBL(save_targ, DO_GVT_GVKEY_CHECK);
RESTORE_ZERO_GVT_ROOT_ON_RETRY(lcl_root, gv_target, dir_hist, dir_tree);
GTMTRIG_ONLY(POP_MVALS_FROM_M_STACK_IF_REALLY_NEEDED(lcl_span_status, ztold_mval, save_msp, save_mv_chain));
t_retry(status);
GTMTRIG_ONLY(skip_INVOKE_RESTART = FALSE);
} else
{ /* else: t_retry has already been done so no need to do that again but need to still invoke tp_restart
* to complete pending "tprestart_state" related work.
* SKIP_GVT_GVKEY_CHECK allows us to skip DBG_CHECK_GVTARGET_GVCURRKEY_IN_SYNC if a trigger invocation
* restarted during GVCST_ROOT_SEARCH, in which case gv_currkey will correspond to ^#t.
* The subsequent tp_restart restores gv_currkey/gv_target to an in-sync state.
*/
RESET_GV_TARGET_LCL_AND_CLR_GBL(save_targ, SKIP_GVT_GVKEY_CHECK);
# ifdef GTM_TRIGGER
assert(ERR_TPRETRY == gtm_trig_status);
TRIGGER_BASE_FRAME_UNWIND_IF_NOMANSLAND;
POP_MVALS_FROM_M_STACK_IF_REALLY_NEEDED(lcl_span_status, ztold_mval, save_msp, save_mv_chain)
if (!lcl_implicit_tstart)
{ /* We started an implicit transaction for spanning nodes in gvcst_put. Invoke restart to return. */
assert(lcl_span_status && !skip_INVOKE_RESTART && (&gvcst_put_ch == ctxt->ch));
INVOKE_RESTART;
}
# endif
rc = tp_restart(1, !TP_RESTART_HANDLES_ERRORS);
assert(0 == rc GTMTRIG_ONLY(&& TPRESTART_STATE_NORMAL == tprestart_state));
DBG_CHECK_GVTARGET_GVCURRKEY_IN_SYNC; /* finishs the check skipped above */
RESTORE_ZERO_GVT_ROOT_ON_RETRY(lcl_root, gv_target, dir_hist, dir_tree);
}
# ifdef GTM_TRIGGER
assert(0 < t_tries);
assert((cdb_sc_normal != status) || (ERR_TPRETRY == gtm_trig_status));
if (cdb_sc_normal == status)
{
DEBUG_ONLY(save_cdb_status = status);
status = LAST_RESTART_CODE;
}
assert((cdb_sc_onln_rlbk2 != status) || TREF(dollar_zonlnrlbk));
assert(((cdb_sc_onln_rlbk1 != status) && (cdb_sc_onln_rlbk2 != status)) || !gv_target->root);
if ((cdb_sc_onln_rlbk2 == status) && lcl_implicit_tstart)
{ /* Database was taken back to a different logical state and we are an implicit TP transaction.
* Issue DBROLLEDBACK error that the application programmer can catch and do the necessary stuff.
*/
assert(gtm_trigger_depth == tstart_trigger_depth);
rts_error(VARLSTCNT(1) ERR_DBROLLEDBACK);
}
/* Note: In case of cdb_sc_onln_rlbk1, the restart logic will take care of doing the root search */
# endif
GTMTRIG_ONLY(assert(!skip_INVOKE_RESTART);) /* if set to TRUE a few statements above, should have been reset by t_retry */
/* At this point, we can be in TP only if we implicitly did a tstart in gvcst_put (as part of a trigger update).
* Assert that. Since the t_retry/tp_restart would have reset si->update_trans, we need to set it again.
* So reinvoke the T_BEGIN call only in case of TP. For non-TP, update_trans is unaffected by t_retry.
*/
assert(!dollar_tlevel GTMTRIG_ONLY(|| lcl_implicit_tstart));
if (dollar_tlevel)
{
jnl_format_done = !needfmtjnl; /* need to reformat jnl records unconditionally in case of TP */
tp_set_sgm(); /* set sgm_info_ptr & first_sgm_info for TP start */
T_BEGIN_SETORKILL_NONTP_OR_TP(ERR_GVPUTFAIL); /* set update_trans and t_err for wrapped TP */
} else if (is_dollar_incr)
jnl_format_done = !needfmtjnl; /* need to reformat jnl records for $INCR even in case of non-TP */
assert(dollar_tlevel || update_trans);
goto tn_restart;
}