iSharkFly-Open
/
fis-gtm
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fis-gtm/sr_port/mu_reorg_upgrd_dwngrd.c

736 lines
33 KiB
C
Raw Permalink Blame History

/****************************************************************
* *
* Copyright 2005, 2013 Fidelity Information Services, Inc *
* *
* This source code contains the intellectual property *
* of its copyright holder(s), and is made available *
* under a license. If you do not know the terms of *
* the license, please stop and do not read further. *
* *
****************************************************************/
#include "mdef.h"
#include "gtm_string.h"
#include "gdsroot.h"
#include "gdsblk.h"
#include "gdsbml.h"
#include "gtm_facility.h"
#include "fileinfo.h"
#include "gdsbt.h"
#include "gdsfhead.h"
#include "gdsblkops.h"
#include "filestruct.h"
#include "error.h"
#include "gdscc.h"
#include "gdskill.h"
#include "jnl.h"
#include "buddy_list.h" /* needed for tp.h */
#include "hashtab_int4.h" /* needed for tp.h */
#include "tp.h"
#include "cli.h"
#include "iosp.h" /* for SS_NORMAL */
#include "min_max.h" /* for MAX macro */
/* Prototypes */
#include "cert_blk.h"
#include "desired_db_format_set.h"
#include "gtmmsg.h" /* for gtm_putmsg prototype */
#include "mu_getlst.h"
#include "mu_reorg_upgrd_dwngrd.h"
#include "mupip_exit.h"
#include "send_msg.h" /* for send_msg */
#include "t_begin.h"
#include "t_end.h"
#include "t_qread.h"
#include "t_retry.h"
#include "t_write.h"
#include "t_write_map.h"
#include "targ_alloc.h"
#include "util.h" /* for util_out_print prototype */
#include "wcs_flu.h"
#define REORG_CONTINUE 1
#define REORG_BREAK 2
LITREF char *gtm_dbversion_table[];
GBLREF char *update_array, *update_array_ptr; /* for the BLK_INIT/BLK_SEG/BLK_ADDR macros */
GBLREF uint4 update_array_size; /* for the BLK_INIT/BLK_SEG/BLK_ADDR macros */
GBLREF bool error_mupip;
GBLREF int4 gv_keysize;
GBLREF bool mu_ctrlc_occurred;
GBLREF bool mu_ctrly_occurred;
GBLREF uint4 process_id;
GBLREF tp_region *grlist;
GBLREF gd_region *gv_cur_region;
GBLREF sgmnt_addrs *cs_addrs;
GBLREF sgmnt_data_ptr_t cs_data;
GBLREF gv_namehead *gv_target;
GBLREF gv_namehead *gv_target_list;
GBLREF inctn_opcode_t inctn_opcode;
GBLREF inctn_detail_t inctn_detail; /* holds detail to fill in to inctn jnl record */
GBLREF boolean_t mu_reorg_nosafejnl; /* TRUE if NOSAFEJNL explicitly specified */
GBLREF trans_num mu_reorg_upgrd_dwngrd_blktn; /* tn in blkhdr of current block processed by REORG UP/DOWNGRADE */
GBLREF boolean_t mu_reorg_upgrd_dwngrd_in_prog; /* TRUE if MUPIP REORG UPGRADE/DOWNGRADE is in progress */
GBLREF unsigned char rdfail_detail;
GBLREF unsigned char t_fail_hist[CDB_MAX_TRIES];
GBLREF unsigned int t_tries;
GBLREF cw_set_element cw_set[]; /* create write set. */
GBLREF unsigned char cw_set_depth;
GBLREF unsigned char cw_map_depth;
GBLREF uint4 update_trans;
error_def(ERR_BUFFLUFAILED);
error_def(ERR_DBBTUWRNG);
error_def(ERR_DBFILERR);
error_def(ERR_DBRDONLY);
error_def(ERR_DSEBLKRDFAIL);
error_def(ERR_DYNUPGRDFAIL);
error_def(ERR_MUNOACTION);
error_def(ERR_MUNOFINISH);
error_def(ERR_MUREORGFAIL);
error_def(ERR_MUREUPDWNGRDEND);
error_def(ERR_REORGCTRLY);
/* actually want the following to be a static variable in this module, but getting the address of a
* static variable through the debugger might be tricky on some platforms. hence use a global variable instead.
*/
GBLDEF trans_num mu_reorg_upgrd_dwngrd_start_tn;
typedef struct
{
int4 blks_read_from_disk_bmp;
int4 blks_skipped_free;
int4 blks_read_from_disk_nonbmp;
int4 blks_skipped_newfmtindisk;
int4 blks_skipped_newfmtincache;
int4 blks_converted_bmp;
int4 blks_converted_nonbmp;
} reorg_stats_t;
void mu_reorg_upgrd_dwngrd(void)
{
blk_hdr new_hdr;
blk_segment *bs1, *bs_ptr;
block_id *blkid_ptr, curblk, curbmp, start_blk, stop_blk, start_bmp, last_bmp;
block_id startblk_input, stopblk_input;
boolean_t upgrade, downgrade, safejnl, nosafejnl, region, first_reorg_in_this_db_fmt, reorg_entiredb;
boolean_t startblk_specified, stopblk_specified, set_fully_upgraded, db_got_to_v5_once, mark_blk_free;
cache_rec_ptr_t cr;
char *bml_lcl_buff = NULL, *command, *reorg_command;
sm_uc_ptr_t bptr = NULL;
cw_set_element *cse;
enum cdb_sc cdb_status;
enum db_ver new_db_format, ondsk_blkver;
gd_region *reg;
int cycle;
int4 blk_seg_cnt, blk_size; /* needed for BLK_INIT,BLK_SEG and BLK_FINI macros */
int4 blocks_left, expected_blks2upgrd, actual_blks2upgrd, total_blks, free_blks;
int4 status, status1, mapsize, lcnt, bml_status;
reorg_stats_t reorg_stats;
sgmnt_addrs *csa;
sgmnt_data_ptr_t csd;
sm_uc_ptr_t blkBase, bml_sm_buff; /* shared memory pointer to the bitmap global buffer */
srch_hist alt_hist;
srch_blk_status *blkhist, bmlhist;
tp_region *rptr;
trans_num curr_tn;
unsigned char save_cw_set_depth;
uint4 lcl_update_trans;
region = (CLI_PRESENT == cli_present("REGION"));
upgrade = (CLI_PRESENT == cli_present("UPGRADE"));
downgrade = (CLI_PRESENT == cli_present("DOWNGRADE"));
assert(upgrade && !downgrade || !upgrade && downgrade);
command = upgrade ? "UPGRADE" : "DOWNGRADE";
reorg_command = upgrade ? "MUPIP REORG UPGRADE" : "MUPIP REORG DOWNGRADE";
reorg_entiredb = TRUE; /* unless STARTBLK or STOPBLK is specified we are going to {up,down}grade the entire database */
startblk_specified = FALSE;
assert(SIZEOF(block_id) == SIZEOF(uint4));
if ((CLI_PRESENT == cli_present("STARTBLK")) && (cli_get_hex("STARTBLK", (uint4 *)&startblk_input)))
{
reorg_entiredb = FALSE;
startblk_specified = TRUE;
}
stopblk_specified = FALSE;
assert(SIZEOF(block_id) == SIZEOF(uint4));
if ((CLI_PRESENT == cli_present("STOPBLK")) && (cli_get_hex("STOPBLK", (uint4 *)&stopblk_input)))
{
reorg_entiredb = FALSE;
stopblk_specified = TRUE;
}
mu_reorg_upgrd_dwngrd_in_prog = TRUE;
mu_reorg_nosafejnl = (CLI_NEGATED == cli_present("SAFEJNL")) ? TRUE : FALSE;
assert(region);
status = SS_NORMAL;
error_mupip = FALSE;
gvinit(); /* initialize gd_header (needed by the later call to mu_getlst) */
mu_getlst("REG_NAME", SIZEOF(tp_region)); /* get the parameter corresponding to REGION qualifier */
if (error_mupip)
{
util_out_print("!/MUPIP REORG !AD cannot proceed with above errors!/", TRUE, LEN_AND_STR(command));
mupip_exit(ERR_MUNOACTION);
}
GVKEYSIZE_INCREASE_IF_NEEDED(DBKEYSIZE(MAX_KEY_SZ)); /* Keep gv_currkey/gv_altkey in sync with respect to gv_keysize
* (now MAX_KEY_SZ) */
assert(DBKEYSIZE(MAX_KEY_SZ) == gv_keysize);
gv_target = targ_alloc(gv_keysize, NULL, NULL); /* t_begin needs this initialized */
gv_target_list = NULL;
memset(&alt_hist, 0, SIZEOF(alt_hist)); /* null-initialize history */
blkhist = &alt_hist.h[0];
for (rptr = grlist; NULL != rptr; rptr = rptr->fPtr)
{
if (mu_ctrly_occurred || mu_ctrlc_occurred)
break;
reg = rptr->reg;
util_out_print("!/Region !AD : MUPIP REORG !AD started", TRUE, REG_LEN_STR(reg), LEN_AND_STR(command));
if (reg_cmcheck(reg))
{
util_out_print("Region !AD : MUPIP REORG !AD cannot run across network",
TRUE, REG_LEN_STR(reg), LEN_AND_STR(command));
status = ERR_MUNOFINISH;
continue;
}
gvcst_init(reg);
assert(update_array != NULL);
/* access method stored in global directory and database file header might be different in which case
* the database setting prevails. therefore, the access method check can be done only after opening
* the database (i.e. after the gvcst_init)
*/
if (dba_bg != reg->dyn.addr->acc_meth)
{
util_out_print("Region !AD : MUPIP REORG !AD cannot continue as access method is not BG",
TRUE, REG_LEN_STR(reg), LEN_AND_STR(command));
status = ERR_MUNOFINISH;
continue;
}
if (reg->was_open) /* Already open under another name. Region will not be marked open */
{
reg->open = FALSE;
continue;
}
TP_CHANGE_REG(reg); /* sets gv_cur_region, cs_addrs, cs_data */
csa = cs_addrs;
csd = cs_data;
blk_size = csd->blk_size; /* "blk_size" is used by the BLK_FINI macro */
if (reg->read_only)
{
gtm_putmsg(VARLSTCNT(4) ERR_DBRDONLY, 2, DB_LEN_STR(reg));
status = ERR_MUNOFINISH;
continue;
}
assert(GDSVCURR == GDSV6); /* so we trip this assert in case GDSVCURR changes without a change to this module */
new_db_format = (upgrade ? GDSV6 : GDSV4);
grab_crit(reg);
curr_tn = csd->trans_hist.curr_tn;
/* set the desired db format in the file header to the appropriate version, increment transaction number */
status1 = desired_db_format_set(reg, new_db_format, reorg_command);
assert(csa->now_crit); /* desired_db_format_set() should not have released crit */
first_reorg_in_this_db_fmt = TRUE; /* with the current desired_db_format, this is the first reorg */
if (SS_NORMAL != status1)
{ /* "desired_db_format_set" would have printed appropriate error messages */
if (ERR_MUNOACTION != status1)
{ /* real error occurred while setting the db format. skip to next region */
status = ERR_MUNOFINISH;
rel_crit(reg);
continue;
}
util_out_print("Region !AD : Desired DB Format remains at !AD after !AD", TRUE, REG_LEN_STR(reg),
LEN_AND_STR(gtm_dbversion_table[new_db_format]), LEN_AND_STR(reorg_command));
if (csd->reorg_db_fmt_start_tn == csd->desired_db_format_tn)
first_reorg_in_this_db_fmt = FALSE;
} else
util_out_print("Region !AD : Desired DB Format set to !AD by !AD", TRUE, REG_LEN_STR(reg),
LEN_AND_STR(gtm_dbversion_table[new_db_format]), LEN_AND_STR(reorg_command));
assert(dba_bg == csd->acc_meth);
/* Check blks_to_upgrd counter to see if upgrade/downgrade is complete */
total_blks = csd->trans_hist.total_blks;
free_blks = csd->trans_hist.free_blocks;
actual_blks2upgrd = csd->blks_to_upgrd;
/* If MUPIP REORG UPGRADE and there is no block to upgrade in the database as indicated by BOTH
* "csd->blks_to_upgrd" and "csd->fully_upgraded", then we can skip processing.
* If MUPIP REORG UPGRADE and all non-free blocks need to be upgraded then again we can skip processing.
*/
if ((upgrade && (0 == actual_blks2upgrd) && csd->fully_upgraded)
|| (!upgrade && ((total_blks - free_blks) == actual_blks2upgrd)))
{
util_out_print("Region !AD : Blocks to Upgrade counter indicates no action needed for MUPIP REORG !AD",
TRUE, REG_LEN_STR(reg), LEN_AND_STR(command));
util_out_print("Region !AD : Total Blocks = [0x!XL] : Free Blocks = [0x!XL] : "
"Blocks to upgrade = [0x!XL]",
TRUE, REG_LEN_STR(reg), total_blks, free_blks, actual_blks2upgrd);
util_out_print("Region !AD : MUPIP REORG !AD finished!/", TRUE, REG_LEN_STR(reg), LEN_AND_STR(command));
rel_crit(reg);
continue;
}
stop_blk = total_blks;
if (stopblk_specified && stopblk_input <= stop_blk)
stop_blk = stopblk_input;
if (first_reorg_in_this_db_fmt)
{ /* Note down reorg start tn (in case we are interrupted, future reorg will know to resume) */
csd->reorg_db_fmt_start_tn = csd->desired_db_format_tn;
csd->reorg_upgrd_dwngrd_restart_block = 0;
start_blk = (startblk_specified ? startblk_input : 0);
} else
{ /* Either a concurrent MUPIP REORG of the same type ({up,down}grade) is currently running
* or a previously running REORG of the same type was interrupted (Ctrl-Ced).
* In either case resume processing from whatever restart block number is stored in fileheader
* the only exception is if "STARTBLK" was specified in the input in which use that unconditionally.
*/
start_blk = (startblk_specified ? startblk_input : csd->reorg_upgrd_dwngrd_restart_block);
}
if (start_blk > stop_blk)
start_blk = stop_blk;
mu_reorg_upgrd_dwngrd_start_tn = csd->reorg_db_fmt_start_tn;
/* Before releasing crit, flush the file-header and dirty buffers in cache to disk. This is because we are now
* going to read each GDS block directly from disk to determine if it needs to be upgraded/downgraded or not.
*/
if (!wcs_flu(WCSFLU_FLUSH_HDR)) /* wcs_flu assumes gv_cur_region is set (which it is in this routine) */
{
rel_crit(reg);
gtm_putmsg(VARLSTCNT(6) ERR_BUFFLUFAILED, 4, LEN_AND_LIT("MUPIP REORG UPGRADE/DOWNGRADE"), DB_LEN_STR(reg));
status = ERR_MUNOFINISH;
continue;
}
rel_crit(reg);
/* Loop through entire database one GDS block at a time and upgrade/downgrade each of them */
status1 = SS_NORMAL;
start_bmp = ROUND_DOWN2(start_blk, BLKS_PER_LMAP);
last_bmp = ROUND_DOWN2(stop_blk - 1, BLKS_PER_LMAP);
curblk = start_blk; /* curblk is the block to be upgraded/downgraded */
util_out_print("Region !AD : Started processing from block number [0x!XL]", TRUE, REG_LEN_STR(reg), curblk);
if (NULL != bptr)
{ /* malloc/free "bptr" for each region as GDS block-size can be different */
free(bptr);
bptr = NULL;
}
memset(&reorg_stats, 0, SIZEOF(reorg_stats)); /* initialize statistics for this region */
for (curbmp = start_bmp; curbmp <= last_bmp; curbmp += BLKS_PER_LMAP)
{
if (mu_ctrly_occurred || mu_ctrlc_occurred)
{
status1 = ERR_MUNOFINISH;
break;
}
/* --------------------------------------------------------------
* Read in current bitmap block
* --------------------------------------------------------------
*/
assert(!csa->now_crit);
bml_sm_buff = t_qread(curbmp, (sm_int_ptr_t)&cycle, &cr); /* bring block into the cache outside of crit */
reorg_stats.blks_read_from_disk_bmp++;
grab_crit(reg);
if (mu_reorg_upgrd_dwngrd_start_tn != csd->desired_db_format_tn)
{ /* csd->desired_db_format changed since reorg started. discontinue the reorg */
/* see later comment on "csd->reorg_upgrd_dwngrd_restart_block" for why the assignment
* of this field should be done only if a db format change did not occur.
*/
rel_crit(reg);
status1 = ERR_MUNOFINISH;
/* This "start_tn" check is redone after the for-loop and an error message is printed there */
break;
} else if (reorg_entiredb)
{ /* Change "csd->reorg_upgrd_dwngrd_restart_block" only if STARTBLK or STOPBLK was NOT specified */
assert(csd->reorg_upgrd_dwngrd_restart_block <= MAX(start_blk, curbmp));
csd->reorg_upgrd_dwngrd_restart_block = curbmp; /* previous blocks have been upgraded/downgraded */
}
/* Check blks_to_upgrd counter to see if upgrade/downgrade is complete.
* Repeat check done a few steps earlier outside of this for loop.
*/
total_blks = csd->trans_hist.total_blks;
free_blks = csd->trans_hist.free_blocks;
actual_blks2upgrd = csd->blks_to_upgrd;
if ((upgrade && (0 == actual_blks2upgrd) && csd->fully_upgraded)
|| (!upgrade && ((total_blks - free_blks) == actual_blks2upgrd)))
{
rel_crit(reg);
break;
}
bml_sm_buff = t_qread(curbmp, (sm_int_ptr_t)&cycle, &cr); /* now that in crit, note down stable buffer */
if (NULL == bml_sm_buff)
rts_error(VARLSTCNT(1) ERR_DSEBLKRDFAIL);
ondsk_blkver = cr->ondsk_blkver; /* note down db fmt on disk for bitmap block */
/* Take a copy of the shared memory bitmap buffer into process-private memory before releasing crit.
* We are interested in those blocks that are currently marked as USED in the bitmap.
* It is possible that once we release crit, concurrent updates change the bitmap state of those blocks.
* In that case, those updates will take care of doing the upgrade/downgrade of those blocks in the
* format currently set in csd->desired_db_format i.e. accomplishing MUPIP REORG UPGRADE/DOWNGRADE's job.
* If the desired_db_format changes concurrently, we will stop doing REORG UPGRADE/DOWNGRADE processing.
*/
if (NULL == bml_lcl_buff)
bml_lcl_buff = malloc(BM_SIZE(BLKS_PER_LMAP));
memcpy(bml_lcl_buff, (blk_hdr_ptr_t)bml_sm_buff, BM_SIZE(BLKS_PER_LMAP));
if (FALSE == cert_blk(reg, curbmp, (blk_hdr_ptr_t)bml_lcl_buff, 0, FALSE))
{ /* certify the block while holding crit as cert_blk uses fields from file-header (shared memory) */
assert(FALSE); /* in pro, skip ugprading/downgarding all blks in this unreliable local bitmap */
rel_crit(reg);
util_out_print("Region !AD : Bitmap Block [0x!XL] has integrity errors. Skipping this bitmap.",
TRUE, REG_LEN_STR(reg), curbmp);
status1 = ERR_MUNOFINISH;
continue;
}
rel_crit(reg);
/* ------------------------------------------------------------------------
* Upgrade/Downgrade all BUSY blocks in the current bitmap
* ------------------------------------------------------------------------
*/
curblk = (curbmp == start_bmp) ? start_blk : curbmp;
mapsize = (curbmp == last_bmp) ? (stop_blk - curbmp) : BLKS_PER_LMAP;
assert(0 != mapsize);
assert(mapsize <= BLKS_PER_LMAP);
db_got_to_v5_once = csd->db_got_to_v5_once;
for (lcnt = curblk - curbmp; lcnt < mapsize; lcnt++, curblk++)
{
if (mu_ctrly_occurred || mu_ctrlc_occurred)
{
status1 = ERR_MUNOFINISH;
goto stop_reorg_on_this_reg; /* goto needed because of nested FOR Loop */
}
GET_BM_STATUS(bml_lcl_buff, lcnt, bml_status);
assert(BLK_MAPINVALID != bml_status); /* cert_blk ran clean so we dont expect invalid entries */
if (BLK_FREE == bml_status)
{
reorg_stats.blks_skipped_free++;
continue;
}
/* MUPIP REORG UPGRADE/DOWNGRADE will convert USED & RECYCLED blocks */
if (db_got_to_v5_once || (BLK_RECYCLED != bml_status))
{ /* Do NOT read recycled V4 block from disk unless it is guaranteed NOT to be too full */
if (lcnt)
{ /* non-bitmap block */
/* read in block from disk into private buffer. dont pollute the cache yet */
if (NULL == bptr)
bptr = (sm_uc_ptr_t)malloc(blk_size);
status1 = dsk_read(curblk, bptr, &ondsk_blkver, FALSE);
/* dsk_read on curblk could return an error (DYNUPGRDFAIL) if curblk needs to be
* upgraded and if its block size was too big to allow the extra block-header space
* requirements for a dynamic upgrade. a MUPIP REORG DOWNGRADE should not error out
* in that case as the block is already in the downgraded format.
*/
if (SS_NORMAL != status1)
{
if (!upgrade && (ERR_DYNUPGRDFAIL == status1))
{
assert(GDSV4 == new_db_format);
ondsk_blkver = new_db_format;
} else
{
gtm_putmsg(VARLSTCNT(5) ERR_DBFILERR, 2, DB_LEN_STR(reg), status1);
util_out_print("Region !AD : Error occurred while reading block "
"[0x!XL]", TRUE, REG_LEN_STR(reg), curblk);
status1 = ERR_MUNOFINISH;
goto stop_reorg_on_this_reg;/* goto needed due to nested FOR Loop */
}
}
reorg_stats.blks_read_from_disk_nonbmp++;
} /* else bitmap block has been read in crit earlier and ondsk_blkver appropriately set */
if (new_db_format == ondsk_blkver)
{
assert((SS_NORMAL == status1) || (!upgrade && (ERR_DYNUPGRDFAIL == status1)));
status1 = SS_NORMAL; /* treat DYNUPGRDFAIL as no error in case of downgrade */
reorg_stats.blks_skipped_newfmtindisk++;
continue; /* current disk version is identical to what is desired */
}
assert(SS_NORMAL == status1);
}
/* Begin non-TP transaction to upgrade/downgrade the block.
* The way we do that is by updating the block using a null update array.
* Any update to a block will trigger an automatic upgrade/downgrade of the block based on
* the current fileheader desired_db_format setting and we use that here.
*/
t_begin(ERR_MUREORGFAIL, UPDTRNS_DB_UPDATED_MASK);
for (; ;)
{
CHECK_AND_RESET_UPDATE_ARRAY; /* reset update_array_ptr to update_array */
curr_tn = csd->trans_hist.curr_tn;
db_got_to_v5_once = csd->db_got_to_v5_once;
if (db_got_to_v5_once || (BLK_RECYCLED != bml_status))
{
blkhist->cse = NULL; /* start afresh (do not use value from previous retry) */
blkBase = t_qread(curblk, (sm_int_ptr_t)&blkhist->cycle, &blkhist->cr);
if (NULL == blkBase)
{
t_retry((enum cdb_sc)rdfail_detail);
continue;
}
blkhist->blk_num = curblk;
blkhist->buffaddr = blkBase;
ondsk_blkver = blkhist->cr->ondsk_blkver;
new_hdr = *(blk_hdr_ptr_t)blkBase;
mu_reorg_upgrd_dwngrd_blktn = new_hdr.tn;
mark_blk_free = FALSE;
inctn_opcode = upgrade ? inctn_blkupgrd : inctn_blkdwngrd;
} else
{
mark_blk_free = TRUE;
inctn_opcode = inctn_blkmarkfree;
}
inctn_detail.blknum_struct.blknum = curblk;
/* t_end assumes that the history it is passed does not contain a bitmap block.
* for bitmap block, the history validation information is passed through cse instead.
* therefore we need to handle bitmap and non-bitmap cases separately.
*/
if (!lcnt)
{ /* Means a bitmap block.
* At this point we can do a "new_db_format != ondsk_blkver" check to determine
* if the block got converted since we did the dsk_read (see the non-bitmap case
* for a similar check done there), but in that case we will have a transaction
* which has read 1 bitmap block and is updating no block. "t_end" currently cannot
* handle this case as it expects any bitmap block that needs validation to also
* have a corresponding cse which will hold its history. Hence we avoid doing the
* new_db_format check. The only disadvantage of this is that we will end up
* modifying the bitmap block as part of this transaction (in an attempt to convert
* its ondsk_blkver) even though it is already in the right format. Since this
* overhead is going to be one per bitmap block and since the block is in the cache
* at this point, we should not lose much.
*/
assert(!mark_blk_free);
BLK_ADDR(blkid_ptr, SIZEOF(block_id), block_id);
*blkid_ptr = 0;
t_write_map(blkhist, (unsigned char *)blkid_ptr, curr_tn, 0);
assert(&alt_hist.h[0] == blkhist);
alt_hist.h[0].blk_num = 0; /* create empty history for bitmap block */
assert(update_trans);
} else
{ /* non-bitmap block. fill in history for validation in t_end */
assert(curblk); /* we should never come here for block 0 (bitmap) */
if (!mark_blk_free)
{
assert(blkhist->blk_num == curblk);
assert(blkhist->buffaddr == blkBase);
blkhist->tn = curr_tn;
alt_hist.h[1].blk_num = 0;
}
/* Also need to pass the bitmap as history to detect if any concurrent M-kill
* is freeing up the same USED block that we are trying to convert OR if any
* concurrent M-set is reusing the same RECYCLED block that we are trying to
* convert. Because of t_end currently not being able to validate a bitmap
* without that simultaneously having a cse, we need to create a cse for the
* bitmap that is used only for bitmap history validation, but should not be
* used to update the contents of the bitmap block in bg_update.
*/
bmlhist.buffaddr = t_qread(curbmp, (sm_int_ptr_t)&bmlhist.cycle, &bmlhist.cr);
if (NULL == bmlhist.buffaddr)
{
t_retry((enum cdb_sc)rdfail_detail);
continue;
}
bmlhist.blk_num = curbmp;
bmlhist.tn = curr_tn;
GET_BM_STATUS(bmlhist.buffaddr, lcnt, bml_status);
if (BLK_MAPINVALID == bml_status)
{
t_retry(cdb_sc_lostbmlcr);
continue;
}
if (!mark_blk_free)
{
if ((new_db_format != ondsk_blkver) && (BLK_FREE != bml_status))
{ /* block still needs to be converted. create cse */
BLK_INIT(bs_ptr, bs1);
BLK_SEG(bs_ptr, blkBase + SIZEOF(new_hdr),
new_hdr.bsiz - SIZEOF(new_hdr));
BLK_FINI(bs_ptr, bs1);
t_write(blkhist, (unsigned char *)bs1, 0, 0,
((blk_hdr_ptr_t)blkBase)->levl, FALSE,
FALSE, GDS_WRITE_PLAIN);
/* The tree_status for now is only used to determin whether writing
* the block to snapshot file. * (see t_end_ops.c).
* For reorg upgrade/downgrade process, the block is updated in a
* sequential way without changing the gv_target. In this case,
* we assume the block is in directory tree so as to have
* it written to the snapshot file
*/
BIT_SET_DIR_TREE(cw_set[cw_set_depth-1].blk_prior_state);
/* reset update_trans in case previous retry had set it to 0 */
update_trans = UPDTRNS_DB_UPDATED_MASK;
if (BLK_RECYCLED == bml_status)
{ /* If block that we are upgarding is RECYCLED, indicate to
* bg_update that blks_to_upgrd counter should NOT be
* touched in this case by setting "mode" to a special value
*/
assert(cw_set[cw_set_depth-1].mode == gds_t_write);
cw_set[cw_set_depth-1].mode = gds_t_write_recycled;
/* we SET block as NOT RECYCLED, otherwise, the mm_update()
* or bg_update_phase2 may skip writing it to snapshot file
* when its level is 0
*/
BIT_CLEAR_RECYCLED(cw_set[cw_set_depth-1].blk_prior_state);
}
} else
{ /* Block got converted by another process since we did the dsk_read.
* or this block became marked free in the bitmap.
* No need to update this block. just call t_end for validation of
* both the non-bitmap block as well as the bitmap block.
* Note down that this transaction is no longer updating any blocks.
*/
update_trans = 0;
}
/* Need to put bit maps on the end of the cw set for concurrency checking.
* We want to simulate t_write_map, except we want to update "cw_map_depth"
* instead of "cw_set_depth". Hence the save and restore logic below.
* This part of the code is similar to the one in mu_swap_blk.c
*/
save_cw_set_depth = cw_set_depth;
assert(!cw_map_depth);
t_write_map(&bmlhist, NULL, curr_tn, 0); /* will increment cw_set_depth */
cw_map_depth = cw_set_depth; /* set cw_map_depth to latest cw_set_depth */
cw_set_depth = save_cw_set_depth;/* restore cw_set_depth */
/* t_write_map simulation end */
} else
{
if (BLK_RECYCLED != bml_status)
{ /* Block was RECYCLED at beginning but no longer so. Retry */
t_retry(cdb_sc_bmlmod);
continue;
}
/* Mark recycled block as FREE in bitmap */
assert(lcnt == (curblk - curbmp));
assert(update_array_ptr == update_array);
*((block_id *)update_array_ptr) = lcnt;
update_array_ptr += SIZEOF(block_id);
/* the following assumes SIZEOF(block_id) == SIZEOF(int) */
assert(SIZEOF(block_id) == SIZEOF(int));
*(int *)update_array_ptr = 0;
t_write_map(&bmlhist, (unsigned char *)update_array, curr_tn, 0);
update_trans = UPDTRNS_DB_UPDATED_MASK;
}
}
assert(SIZEOF(lcl_update_trans) == SIZEOF(update_trans));
lcl_update_trans = update_trans; /* take a copy before t_end modifies it */
if ((trans_num)0 != t_end(&alt_hist, NULL, TN_NOT_SPECIFIED))
{ /* In case this is MM and t_end() remapped an extended database, reset csd */
assert(csd == cs_data);
if (!lcl_update_trans)
{
assert(lcnt);
assert(!mark_blk_free);
assert((new_db_format == ondsk_blkver) || (BLK_BUSY != bml_status));
if (BLK_BUSY != bml_status)
reorg_stats.blks_skipped_free++;
else
reorg_stats.blks_skipped_newfmtincache++;
} else if (!lcnt)
reorg_stats.blks_converted_bmp++;
else
reorg_stats.blks_converted_nonbmp++;
break;
}
assert(csd == cs_data);
}
}
}
stop_reorg_on_this_reg:
/* even though ctrl-c occurred, update file-header fields to store reorg's progress before exiting */
grab_crit(reg);
blocks_left = 0;
assert(csd->trans_hist.total_blks >= csd->blks_to_upgrd);
actual_blks2upgrd = csd->blks_to_upgrd;
total_blks = csd->trans_hist.total_blks;
free_blks = csd->trans_hist.free_blocks;
/* Care should be taken not to set "csd->reorg_upgrd_dwngrd_restart_block" in case of a concurrent db fmt
* change. This is because let us say we are doing REORG UPGRADE. A concurrent REORG DOWNGRADE would
* have reset "csd->reorg_upgrd_dwngrd_restart_block" field to 0 and if that reorg is interrupted by a
* Ctrl-C (before this reorg came here) it would have updated "csd->reorg_upgrd_dwngrd_restart_block" to
* a non-zero value indicating how many blocks from 0 have been downgraded. We should not reset this
* field to "curblk" as it will be mis-interpreted as the number of blocks that have been DOWNgraded.
*/
set_fully_upgraded = FALSE;
if (mu_reorg_upgrd_dwngrd_start_tn != csd->desired_db_format_tn)
{ /* csd->desired_db_format changed since reorg started. discontinue the reorg */
util_out_print("Region !AD : Desired DB Format changed during REORG. Stopping REORG.",
TRUE, REG_LEN_STR(reg));
status1 = ERR_MUNOFINISH;
} else if (reorg_entiredb)
{ /* Change "csd->reorg_upgrd_dwngrd_restart_block" only if STARTBLK or STOPBLK was NOT specified */
assert(csd->reorg_upgrd_dwngrd_restart_block <= curblk);
csd->reorg_upgrd_dwngrd_restart_block = curblk; /* blocks lesser than this have been upgraded/downgraded */
expected_blks2upgrd = upgrade ? 0 : (total_blks - free_blks);
blocks_left = upgrade ? actual_blks2upgrd : (expected_blks2upgrd - actual_blks2upgrd);
/* If this reorg command went through all blocks in the database, then it should have
* correctly concluded at this point whether the reorg is complete or not.
* If this reorg command started from where a previous incomplete reorg left
* (i.e. first_reorg_in_this_db_fmt is FALSE), it cannot determine if the initial
* GDS blocks that it skipped are completely {up,down}graded or not.
*/
assert((0 == blocks_left) || (SS_NORMAL != status1) || !first_reorg_in_this_db_fmt);
/* If this is a MUPIP REORG UPGRADE that did go through every block in the database (indicated by
* "reorg_entiredb" && "first_reorg_in_this_db_fmt") and the current count of "blks_to_upgrd" is
* 0 in the file-header and the desired_db_format did not change since the start of the REORG,
* we can be sure that the entire database has been upgraded. Set "csd->fully_upgraded" to TRUE.
*/
if ((SS_NORMAL == status1) && first_reorg_in_this_db_fmt && upgrade && (0 == actual_blks2upgrd))
{
csd->fully_upgraded = TRUE;
csd->db_got_to_v5_once = TRUE;
set_fully_upgraded = TRUE;
}
/* flush all changes noted down in the file-header */
if (!wcs_flu(WCSFLU_FLUSH_HDR)) /* wcs_flu assumes gv_cur_region is set (which it is in this routine) */
{
gtm_putmsg(VARLSTCNT(6) ERR_BUFFLUFAILED, 4,
LEN_AND_LIT("MUPIP REORG UPGRADE/DOWNGRADE"), DB_LEN_STR(reg));
status = ERR_MUNOFINISH;
rel_crit(reg);
continue;
}
}
curr_tn = csd->trans_hist.curr_tn;
rel_crit(reg);
util_out_print("Region !AD : Stopped processing at block number [0x!XL]", TRUE, REG_LEN_STR(reg), curblk);
/* Print statistics */
util_out_print("Region !AD : Statistics : Blocks Read From Disk (Bitmap) : 0x!XL",
TRUE, REG_LEN_STR(reg), reorg_stats.blks_read_from_disk_bmp);
util_out_print("Region !AD : Statistics : Blocks Skipped (Free) : 0x!XL",
TRUE, REG_LEN_STR(reg), reorg_stats.blks_skipped_free);
util_out_print("Region !AD : Statistics : Blocks Read From Disk (Non-Bitmap) : 0x!XL",
TRUE, REG_LEN_STR(reg), reorg_stats.blks_read_from_disk_nonbmp);
util_out_print("Region !AD : Statistics : Blocks Skipped (new fmt in disk) : 0x!XL",
TRUE, REG_LEN_STR(reg), reorg_stats.blks_skipped_newfmtindisk);
util_out_print("Region !AD : Statistics : Blocks Skipped (new fmt in cache) : 0x!XL",
TRUE, REG_LEN_STR(reg), reorg_stats.blks_skipped_newfmtincache);
util_out_print("Region !AD : Statistics : Blocks Converted (Bitmap) : 0x!XL",
TRUE, REG_LEN_STR(reg), reorg_stats.blks_converted_bmp);
util_out_print("Region !AD : Statistics : Blocks Converted (Non-Bitmap) : 0x!XL",
TRUE, REG_LEN_STR(reg), reorg_stats.blks_converted_nonbmp);
if (reorg_entiredb && (SS_NORMAL == status1) && (0 != blocks_left))
{ /* file-header counter does not match what reorg on the entire database expected to see */
gtm_putmsg(VARLSTCNT(4) ERR_DBBTUWRNG, 2, expected_blks2upgrd, actual_blks2upgrd);
util_out_print("Region !AD : Run MUPIP INTEG (without FAST qualifier) to fix the counter",
TRUE, REG_LEN_STR(reg));
status1 = ERR_MUNOFINISH;
} else
util_out_print("Region !AD : Total Blocks = [0x!XL] : Free Blocks = [0x!XL] : "
"Blocks to upgrade = [0x!XL]",
TRUE, REG_LEN_STR(reg), total_blks, free_blks, actual_blks2upgrd);
/* Issue success or failure message for this region */
if (SS_NORMAL == status1)
{ /* issue success only if REORG did not encounter any error in its processing */
if (set_fully_upgraded)
util_out_print("Region !AD : Database is now FULLY UPGRADED", TRUE, REG_LEN_STR(reg));
util_out_print("Region !AD : MUPIP REORG !AD finished!/", TRUE, REG_LEN_STR(reg), LEN_AND_STR(command));
send_msg(VARLSTCNT(7) ERR_MUREUPDWNGRDEND, 5, REG_LEN_STR(reg), process_id, process_id, &curr_tn);
} else
{
assert(ERR_MUNOFINISH == status1);
assert((SS_NORMAL == status) || (ERR_MUNOFINISH == status));
util_out_print("Region !AD : MUPIP REORG !AD incomplete. See above messages.!/",
TRUE, REG_LEN_STR(reg), LEN_AND_STR(command));
status = status1;
}
}
if (NULL != bptr)
free(bptr);
if (NULL != bml_lcl_buff)
free(bml_lcl_buff);
if (mu_ctrly_occurred || mu_ctrlc_occurred)
{
gtm_putmsg(VARLSTCNT(1) ERR_REORGCTRLY);
status = ERR_MUNOFINISH;
}
mupip_exit(status);
}
Reference in New Issue View Git Blame Copy Permalink