iSharkFly-Open
/
fis-gtm
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fis-gtm/sr_unix/jnl_file_extend.c

315 lines
12 KiB
C
Raw Permalink Blame History

/****************************************************************
* *
* Copyright 2001, 2013 Fidelity Information Services, Inc *
* *
* This source code contains the intellectual property *
* of its copyright holder(s), and is made available *
* under a license. If you do not know the terms of *
* the license, please stop and do not read further. *
* *
****************************************************************/
#include "mdef.h"
#include "gtm_string.h"
#include "gtm_stat.h"
#include "gtm_fcntl.h"
#include "gtm_unistd.h"
#include "gdsroot.h"
#include "gtm_statvfs.h"
#include "gtm_facility.h"
#include "fileinfo.h"
#include "gdsbt.h"
#include "gdsfhead.h"
#include "filestruct.h"
#include "ccp.h"
#include "iosp.h"
#include "jnl.h"
#include "gtmio.h"
#include "eintr_wrappers.h"
#include "send_msg.h"
#include "is_file_identical.h"
#include "dbfilop.h"
#include "disk_block_available.h"
#include "wcs_flu.h"
#include "anticipatory_freeze.h"
#include "error.h"
GBLREF gd_region *gv_cur_region;
GBLREF jnl_gbls_t jgbl;
GBLREF jnlpool_addrs jnlpool;
GBLREF sgmnt_addrs *cs_addrs;
GBLREF sgmnt_data_ptr_t cs_data;
GBLREF boolean_t in_jnl_file_autoswitch;
error_def(ERR_JNLEXTEND);
error_def(ERR_JNLREADEOF);
error_def(ERR_JNLSPACELOW);
error_def(ERR_NEWJNLFILECREAT);
error_def(ERR_DSKSPACEFLOW);
error_def(ERR_JNLFILEXTERR);
error_def(ERR_DBFILERR);
error_def(ERR_NOSPACEEXT);
error_def(ERR_JNLRDERR);
error_def(ERR_JNLWRERR);
error_def(ERR_JNLNOCREATE);
error_def(ERR_PREMATEOF);
uint4 jnl_file_extend(jnl_private_control *jpc, uint4 total_jnl_rec_size)
{
file_control *fc;
boolean_t need_extend;
jnl_buffer_ptr_t jb;
jnl_create_info jnl_info;
jnl_file_header *header;
unsigned char hdr_buff[REAL_JNL_HDR_LEN + MAX_IO_BLOCK_SIZE];
uint4 new_alq;
sgmnt_addrs *csa;
sgmnt_data_ptr_t csd;
char prev_jnl_fn[JNL_NAME_SIZE];
uint4 jnl_status = 0, status;
int new_blocks, warn_blocks, result;
gtm_uint64_t avail_blocks;
uint4 aligned_tot_jrec_size, count;
uint4 jnl_fs_block_size, read_write_size;
DCL_THREADGBL_ACCESS;
switch(jpc->region->dyn.addr->acc_meth)
{
case dba_mm:
case dba_bg:
csa = &FILE_INFO(jpc->region)->s_addrs;
break;
default:
GTMASSERT;
}
csd = csa->hdr;
assert(csa == cs_addrs && csd == cs_data);
assert(csa->now_crit || (csd->clustered && (CCST_CLOSED == csa->nl->ccp_state)));
assert(&FILE_INFO(jpc->region)->s_addrs == csa);
assert(csa->jnl_state == csd->jnl_state);
assertpro(JNL_ENABLED(csa) && (NOJNL != jpc->channel) && (!JNL_FILE_SWITCHED(jpc)));
/* crit and messing with the journal file - how could it have vanished? */
if (!csd->jnl_deq || (csd->jnl_alq + csd->jnl_deq > csd->autoswitchlimit))
{
assert(DIVIDE_ROUND_UP(total_jnl_rec_size, DISK_BLOCK_SIZE) <= csd->jnl_alq);
assert(csd->jnl_alq == csd->autoswitchlimit);
new_blocks = csd->jnl_alq;
} else
/* May cause extension of csd->jnl_deq * n blocks where n > 0 */
new_blocks = ROUND_UP(DIVIDE_ROUND_UP(total_jnl_rec_size, DISK_BLOCK_SIZE), csd->jnl_deq);
jpc->status = SS_NORMAL;
jb = jpc->jnl_buff;
assert(0 <= new_blocks);
DEBUG_ONLY(count = 0);
for (need_extend = (0 != new_blocks); need_extend; )
{
DEBUG_ONLY(count++);
/* usually we will do the loop just once where we do the file extension.
* rarely we might need to do an autoswitch instead after which again rarely
* we might need to do an extension on the new journal to fit in the transaction's journal requirements.
* therefore we should do this loop a maximum of twice. hence the assert below.
*/
assert(count <= 2);
need_extend = FALSE;
if (SS_NORMAL == (status = disk_block_available(jpc->channel, &avail_blocks, TRUE)))
{
warn_blocks = (csd->jnl_alq + csd->jnl_deq > csd->autoswitchlimit)
? ((csd->jnl_deq > csd->autoswitchlimit) ? csd->jnl_deq : csd->autoswitchlimit)
: new_blocks;
if ((warn_blocks * EXTEND_WARNING_FACTOR) > avail_blocks)
{
if (new_blocks > avail_blocks)
{ /* If we cannot satisfy the request, it is an error, unless the anticipatory freeze
* scheme is in effect in which case, we will assume space is available even if
* it is not and go ahead with writes to the disk. If the writes fail with ENOSPC
* we will freeze the instance and wait for space to become available and keep
* retrying the writes. Therefore, we make the NOSPACEEXT a warning in this case.
*/
SETUP_THREADGBL_ACCESS;
if (!ANTICIPATORY_FREEZE_ENABLED(csa))
{
send_msg_csa(CSA_ARG(csa) VARLSTCNT(6) ERR_NOSPACEEXT, 4,
JNL_LEN_STR(csd), new_blocks, avail_blocks);
new_blocks = 0;
jpc->status = SS_NORMAL;
break;
} else
send_msg_csa(CSA_ARG(csa) VARLSTCNT(6) MAKE_MSG_WARNING(ERR_NOSPACEEXT), 4,
JNL_LEN_STR(csd), new_blocks, avail_blocks);
} else
send_msg_csa(CSA_ARG(csa) VARLSTCNT(5) ERR_DSKSPACEFLOW, 3, JNL_LEN_STR(csd),
(avail_blocks - warn_blocks));
}
} else
send_msg_csa(CSA_ARG(csa) VARLSTCNT(5) ERR_JNLFILEXTERR, 2, JNL_LEN_STR(csd), status);
new_alq = jb->filesize + new_blocks;
/* ensure current journal file size is well within autoswitchlimit --> design constraint */
assert(csd->autoswitchlimit >= jb->filesize);
if (csd->autoswitchlimit < (jb->filesize + (EXTEND_WARNING_FACTOR * new_blocks))) /* close to max */
send_msg_csa(CSA_ARG(csa) VARLSTCNT(5) ERR_JNLSPACELOW, 3, JNL_LEN_STR(csd),
csd->autoswitchlimit - jb->filesize);
if (csd->autoswitchlimit < new_alq)
{ /* Reached max, need to autoswitch */
/* Ensure new journal file can hold the entire current transaction's journal record requirements */
assert(csd->autoswitchlimit >= MAX_REQD_JNL_FILE_SIZE(total_jnl_rec_size));
memset(&jnl_info, 0, SIZEOF(jnl_info));
jnl_info.prev_jnl = &prev_jnl_fn[0];
set_jnl_info(gv_cur_region, &jnl_info);
assert(JNL_ENABLED(csa) && (NOJNL != jpc->channel) && !(JNL_FILE_SWITCHED(jpc)));
jnl_status = jnl_ensure_open();
if (0 == jnl_status)
{ /* flush the cache and jnl-buffer-contents to current journal file before
* switching to a new journal. Set a global variable in_jnl_file_autoswitch
* so jnl_write can know not to do the padding check. But because this is a global
* variable, we also need to make sure it is reset in case of errors during the
* autoswitch (or else calls to jnl_write after we are out of the autoswitch logic
* will continue to incorrectly not do the padding check. Hence a condition handler.
*/
assert(!in_jnl_file_autoswitch);
in_jnl_file_autoswitch = TRUE;
/* Also make sure time is not changed. This way if "jnl_write" as part of writing a
* journal record invokes jnl_file_extend, when the autoswitch is done and writing
* of the parent jnl_write resumes, we want it to continue with the same timestamp
* and not have to reset its time (non-trivial task) to reflect any changes since then.
*/
assert(!jgbl.save_dont_reset_gbl_jrec_time);
jgbl.save_dont_reset_gbl_jrec_time = jgbl.dont_reset_gbl_jrec_time;
jgbl.dont_reset_gbl_jrec_time = TRUE;
/* Establish a condition handler so we reset a few global variables that have
* temporarily been modified in case of errors inside wcs_flu/jnl_file_close.
*/
ESTABLISH_RET(jnl_file_autoswitch_ch, EXIT_ERR);
/* It is possible we still have not written a PINI record in this journal file
* (e.g. mupip extend saw the need to do jnl_file_extend inside jnl_write while
* trying to write a PINI record). Write a PINI record in that case before closing
* the journal file that way the EOF record will have a non-zero pini_addr.
*/
if (0 == jpc->pini_addr)
jnl_put_jrt_pini(csa);
wcs_flu(WCSFLU_FLUSH_HDR | WCSFLU_WRITE_EPOCH | WCSFLU_SPEEDUP_NOBEFORE);
jnl_file_close(gv_cur_region, TRUE, TRUE);
REVERT;
in_jnl_file_autoswitch = FALSE;
jgbl.dont_reset_gbl_jrec_time = jgbl.save_dont_reset_gbl_jrec_time;
DEBUG_ONLY(jgbl.save_dont_reset_gbl_jrec_time = FALSE);
assert((dba_mm == cs_data->acc_meth) || (csd == cs_data));
csd = cs_data; /* In MM, wcs_flu() can remap an extended DB, so reset csd to be sure */
} else
{
if (SS_NORMAL != jpc->status)
rts_error_csa(CSA_ARG(csa) VARLSTCNT(7) jnl_status, 4, JNL_LEN_STR(csd),
DB_LEN_STR(gv_cur_region), jpc->status);
else
rts_error_csa(CSA_ARG(csa) VARLSTCNT(6) jnl_status, 4, JNL_LEN_STR(csd),
DB_LEN_STR(gv_cur_region));
}
assert(!jgbl.forw_phase_recovery || (NULL != jgbl.mur_pini_addr_reset_fnptr));
assert(jgbl.forw_phase_recovery || (NULL == jgbl.mur_pini_addr_reset_fnptr));
if (NULL != jgbl.mur_pini_addr_reset_fnptr)
(*jgbl.mur_pini_addr_reset_fnptr)(csa);
assert(!jnl_info.no_rename);
assert(!jnl_info.no_prev_link);
if (EXIT_NRM == cre_jnl_file(&jnl_info))
{
assert(0 == memcmp(csd->jnl_file_name, jnl_info.jnl, jnl_info.jnl_len));
assert(csd->jnl_file_name[jnl_info.jnl_len] == '\0');
assert(csd->jnl_file_len == jnl_info.jnl_len);
assert(csd->jnl_buffer_size == jnl_info.buffer);
assert(csd->jnl_alq == jnl_info.alloc);
assert(csd->jnl_deq == jnl_info.extend);
assert(csd->jnl_before_image == jnl_info.before_images);
csd->jnl_checksum = jnl_info.checksum;
csd->jnl_eovtn = csd->trans_hist.curr_tn;
send_msg_csa(CSA_ARG(csa) VARLSTCNT(4) ERR_NEWJNLFILECREAT, 2, JNL_LEN_STR(csd));
fc = gv_cur_region->dyn.addr->file_cntl;
fc->op = FC_WRITE;
fc->op_buff = (sm_uc_ptr_t)csd;
fc->op_len = SGMNT_HDR_LEN;
fc->op_pos = 1;
status = dbfilop(fc);
if (SS_NORMAL != status)
send_msg_csa(CSA_ARG(csa) VARLSTCNT(5) ERR_DBFILERR, 2, DB_LEN_STR(gv_cur_region), status);
assert(JNL_ENABLED(csa));
/* call jnl_ensure_open instead of jnl_file_open to make sure jpc->pini_addr is set to 0 */
jnl_status = jnl_ensure_open(); /* sets jpc->status */
if (0 != jnl_status)
{
if (jpc->status)
rts_error_csa(CSA_ARG(csa) VARLSTCNT(7) jnl_status, 4, JNL_LEN_STR(csd),
DB_LEN_STR(gv_cur_region), jpc->status);
else
rts_error_csa(CSA_ARG(csa) VARLSTCNT(6) jnl_status, 4, JNL_LEN_STR(csd),
DB_LEN_STR(gv_cur_region));
}
assert(jb->filesize == csd->jnl_alq);
if (csd->jnl_alq + csd->jnl_deq <= csd->autoswitchlimit)
{
aligned_tot_jrec_size = ALIGNED_ROUND_UP(MAX_REQD_JNL_FILE_SIZE(total_jnl_rec_size),
csd->jnl_alq, csd->jnl_deq);
if (aligned_tot_jrec_size > csd->jnl_alq)
{ /* need to extend more than initial allocation in the new journal file
* to accommodate the current transaction.
*/
new_blocks = aligned_tot_jrec_size - csd->jnl_alq;
assert(new_blocks);
assert(0 == new_blocks % csd->jnl_deq);
need_extend = TRUE;
}
}
} else
{
send_msg_csa(CSA_ARG(csa) VARLSTCNT(4) ERR_JNLNOCREATE, 2, JNL_LEN_STR(csd));
jpc->status = ERR_JNLNOCREATE;
new_blocks = -1;
}
} else
{
assert(!need_extend); /* ensure we won't go through the for loop again */
/* Virtually extend currently used journal file */
jnl_fs_block_size = jb->fs_block_size;
header = (jnl_file_header *)(ROUND_UP2((uintszofptr_t)hdr_buff, jnl_fs_block_size));
read_write_size = ROUND_UP2(REAL_JNL_HDR_LEN, jnl_fs_block_size);
assert((unsigned char *)header + read_write_size <= ARRAYTOP(hdr_buff));
DO_FILE_READ(jpc->channel, 0, header, read_write_size, jpc->status, jpc->status2);
if (SS_NORMAL != jpc->status)
{
assert(FALSE);
rts_error_csa(CSA_ARG(csa) VARLSTCNT(5) ERR_JNLRDERR, 2, JNL_LEN_STR(csd), jpc->status);
}
assert((header->virtual_size + new_blocks) == new_alq);
jb->filesize = new_alq; /* Actually this is virtual file size blocks */
header->virtual_size = new_alq;
JNL_DO_FILE_WRITE(csa, csd->jnl_file_name, jpc->channel, 0,
header, read_write_size, jpc->status, jpc->status2);
if (SS_NORMAL != jpc->status)
{
assert(WBTEST_RECOVER_ENOSPC == gtm_white_box_test_case_number);
rts_error_csa(CSA_ARG(csa) VARLSTCNT(5) ERR_JNLWRERR, 2, JNL_LEN_STR(csd), jpc->status);
}
}
if (0 >= new_blocks)
break;
}
if (0 < new_blocks)
{
INCR_GVSTATS_COUNTER(csa, csa->nl, n_jnl_extends, 1);
return EXIT_NRM;
}
jpc->status = ERR_JNLREADEOF;
jnl_file_lost(jpc, ERR_JNLEXTEND);
return EXIT_ERR;
}
CONDITION_HANDLER(jnl_file_autoswitch_ch)
{
START_CH;
assert(in_jnl_file_autoswitch);
in_jnl_file_autoswitch = FALSE;
jgbl.dont_reset_gbl_jrec_time = jgbl.save_dont_reset_gbl_jrec_time;
DEBUG_ONLY(jgbl.save_dont_reset_gbl_jrec_time = FALSE);
NEXTCH;
}
Reference in New Issue View Git Blame Copy Permalink