python-peps/pep-0101.txt

528 lines
22 KiB
Plaintext
Raw Normal View History

PEP: 101
Title: Doing Python Releases 101
Version: $Revision$
Last-Modified: $Date$
Author: barry@zope.com (Barry A. Warsaw), guido@python.org (Guido van Rossum)
Status: Active
Type: Informational
Created: 22-Aug-2001
Post-History:
Abstract
Making a Python release is an arduous processes that takes a
minimum of half a day's work even for an experienced releaser.
Until recently, most -- if not all -- of that burden was borne by
Guido himself. But several recent releases have been performed by
other folks, so this PEP attempts to collect, in one place, all
the steps needed to make a Python release. It is organized as a
recipe and you can actually print this out and check items off as
you complete them.
How to Make A Release
Here are the steps taken to make a Python release. Some steps are
more fuzzy than others because there's little that can be
automated (e.g. writing the NEWS entries). Where a step is
usually performed by An Expert, the name of that expert is given.
Otherwise, assume the step is done by the Release Manager (RM),
the designated person performing the release. Almost every place
the RM is mentioned below, this step can also be done by the BDFL
of course!
XXX: We should include a dependency graph to illustrate the steps
that can be taken in parallel, or those that depend on other
steps.
We use the following conventions in the examples below. Where a
release number is given, it is of the form X.YaZ, e.g. 2.1a3 for
Python 2.1 alpha 3, where "a" == alpha, "b" == beta, "rc" ==
release candidate. Final releases are named "releaseXY" so the
branch tag is "releaseXY-branch" and the fork tag on the trunk is
"releaseXY-fork". If a micro release number is used, then we'll
say X.Y.MaZ.
___ At noon the day before the release, create a branch for X.YaZ.
All Python development happens on the trunk. Making releases
from a branch allows development by the community to continue
without impacting what ends up in the release. There's a
natural tension here though: branching too soon causes headaches
when the branch has to be merged back into the trunk, while
branching too late can cause dependency problems with
documentation and Windows release steps.
The compromise is to create the branch at noon, local time, the
day before the release. This should give enough time to Fred to
make the documentation, then for Tim to create the Windows
installer, both of which need to happen before the release can
be announced. It's also short enough that hopefully not too
many trunk changes will need to be merged into the branch, or
vice versa.
Once the branch is made, only the RM or his appointed bots are
allowed to make commits to the branch. You can assume that Fred
is a bot for the Doc/ tree, Tim is a bot for the Windows stuff,
and Jack is a bot for Mac stuff.
Anyone can continue to make checkins on the trunk, but if such a
change should be merged into the branch, the committer must
indicate this in the checkin message. It is the responsibility
of the RM to decide on a case-by-case basis which trunk
modifications should be merged into the branch.
To create a branch the following steps are taken:
___ Do a CVS update with the -A, -d, and -P flags, e.g.
% cvs -q update -d -P -A
___ CVS tag the trunk with the symbolic name "rXYaZ-fork", e.g.
% cvs tag r22a3-fork
___ Make the branch with the symbolic name "rXYaZ-branch", e.g.
% cvs tag -b r22a3-branch
___ Check out a clean version of the branch into a new directory.
You'll be doing a lot of work in this directory and you want
to keep it straight from your trunk working directory. E.g.
% cvs -d <cvsroot> -q co -d python-22a3 -r r22a3-branch python/dist/src
___ Send an email to python-dev@python.org indicating the fork and
branch tags you've just created.
___ Put a freeze on check ins into the branch. At this point,
nobody except the RM should make any commits to the branch (or
his duly assigned agents, i.e. Guido the BDFL, Fred Drake for
documentation, or Tim Peters for Windows). If the RM screwed up
and some desperate last minute change to the branch is
necessary, it can mean extra work for Fred and Tim. So try to
avoid this!
___ In the branch, change Include/patchlevel.h in two places, to
reflect the new version number you've just created. You'll want
to change the PY_VERSION macro, and one or several of the
version subpart macros just above PY_VERSION, as appropriate.
___ If you're changing the version number for Python (e.g. from
Python 2.1.1 to Python 2.1.2), you also need to update the
README file, which has a big banner at the top proclaiming its
identity. Don't do this if you're just releasing a new alpha or
beta release, but /do/ do this if you're release a new micro
release.
2001-10-25 11:41:29 -04:00
___ For the next few hours, selectively merge stuff from trunk into
branch. For each change you see on the trunk (i.e. via the
python-checkins mailing list), you need to decide whether the
change should also be applied to the branch.
There is a tension here. Announcing the branch often jogs
people's natural tendency to procrastinate so some very useful
patches end up getting checked in at the last moment. But the
Windows and Docs releases tend to be built many hours before the
source release, and changes to the branch can force a lot of
wasted effort to rebuild them. The best advice is to be
judicious and to consult Fred and Tim before adding anything
big. You really want to avoid skew between the various platform
releases.
2001-10-25 01:19:19 -04:00
Note that committers of changes to the trunk SHOULD include in
the checkin message, a note indicating the suitability of their
patch for the branch.
2001-08-23 18:35:32 -04:00
If so, it's fairly easy to apply the change by diff'ing the file
and patching it manually. You can also sometimes get away with
just copying the file from the trunk directory to the branch
directory, but be careful so you don't lose changes that only
exist in the branch!
___ After creating the branch, the most important thing to do next
is to update the Misc/NEWS file. Tim will need this in order to
do the Windows release and he likes to stay up late. This step
can be pretty tedious, so it's best to get to it immediately
2001-10-25 11:41:29 -04:00
after making the branch, or even before you've made the branch.
The sooner the better (but again, watch for new checkins up
until the release is made!)
Add high level items new to this release. E.g. if we're
releasing 2.2a3, there must be a section at the top of the file
explaining "What's new in Python 2.2a3". It will be followed by
a section entitled "What's new in Python 2.2a2".
Note that you /hope/ that as developers add new features to the
trunk, they've updated the NEWS file accordingly. You can't be
positive, so double check. If you're a Unix weenie, it helps to
verify with Tim Peters about changes on Windows, and Jack Jansen
about changes on the Mac.
This command should help you:
% cvs log -rr22a1: | python Tools/scripts/logmerge.py > /tmp/news.txt
IOW, you're printing out all the cvs log entries from the
previous release until now. You can then troll through the
news.txt file looking for interesting things to add to NEWS.
___ Check your NEWS changes into the branch and into the trunk.
___ Once the branch is frozen, Fred Drake needs to create the HTML
from the documentation. He does this and uploads the file to
www.python.org. Then he tells Tim Peters where this file is.
This may generate some last minute changes on the branch. Once
Fred is done, there can be no further checkins on the branch in
the Doc/ directory -- not even by the RM. For final releases,
Fred also sends email to Milan Zamazal for conversion to the GNU
Info format, and to Hernan M. Foffani for conversion to HTML
Help.
Note that Fred is responsible both for merging doc changes from
the trunk to the branch AND for merging any branch changes from
the branch to the trunk during the cleaning up phase.
2001-12-21 16:07:57 -05:00
Basically, if it's in Doc/, Fred will take care of it.
___ Tim Peters grabs the HTML and uses this to build the Windows
installer.
___ Tim performs his Windows magic, generating an installer
executable. He uploads this file to python.org, and then sends
the RM a notice which includes the location and MD5 checksum of
the Windows executable.
Note that Tim's creation of the Windows executable may generate
a few more commits on the branch. Tim will be responsible for
merging Windows-specific changes from trunk to branch, and from
branch to trunk.
___ It's Noon!
Now, you're ready to build the source tarball. First cd to your
working directory for the branch. E.g.
% cd .../python-22a3
___ Do a "cvs update" in this directory. Do NOT include the -A flag!
You should not see any "M" files, but you may see several "P"
files. I.e. you better not have any uncommitted changes in your
working directory, but you may pick up some of Fred's or Tim's
last minute changes.
___ Now tag the branch using a symbolic name like "rXYaZ",
e.g. r22a3
% cvs tag r22a3
___ Change to a neutral directory, i.e. one in which you can do a
fresh, virgin, cvs export of the branch. You will be creating a
new directory at this location, to be named "Python-X.YaZ". Do
a CVS export of the tagged branch.
% cd ~
% cvs -d <cvsroot> export -rr22a3 -d Python-2.2a3 python/dist/src
___ Generate the tarball. Note that we're not using the `z' option
on the tar command because 1) that's only supported by GNU tar
as far as we know, and 2) we're going to max out the compression
level, which isn't a supported option.
% tar cf - Python-2.2a2 | gzip -9 > Python-2.2a2.tgz
___ Calculate the MD5 checksum of the tgz file you just created
% md5sum Python-2.2a2.tgz
Note that if you don't have the md5sum program, there is a
Python replacement in the Tools/scripts/md5sum.py file.
___ Now you want to perform the very important step of checking the
tarball you just created, to make sure a completely clean,
virgin build passes the regression test. Here are the best
steps to take:
% cd /tmp
% tar zxvf ~/Python-2.2a3.tgz
% cd Python-2.2a3
% ls
(Do things look reasonable?)
% ./configure
(Loads of configure output)
% make test
(Do all the expected tests pass?)
If the tests pass, then you can feel good that the tarball is
fine. If some of the tests fail, or anything else about the
freshly unpacked directory looks weird, you better stop now and
figure out what the problem is.
___ Upload the tgz file to creosote.python.org. Tim will have
already uploaded the exe file to creosote, but if not, you'll
need to do that too. These steps can take a long time depending
on your network bandwidth. scp both files from your own machine
to creosote.
___ While you're waiting, you can start twiddling the web pages to
include the announcement.
___ If necessary, and if you have the right permissions (the
python.org sysadmins must set this up for you), check out the
web site CVS tree by doing:
% cvs -d :ext:<you>@creosote.python.org:/usr/local/cvsroot co pydotorg
___ In the python.org web site CVS tree, cd to the X.Y
subdirectory, and copy index.ht to new-index.ht. Be sure to
do a "cvs update" first!
% cd .../pydotorg
% cvs -q up -P -d
% cd 2.2
% cp index.ht new-index.ht
___ Edit the file for content: usually you can globally replace
X.Ya(Z-1) with X.YaZ. However, you'll need to think about the
"What's New?" section.
___ Copy the Misc/NEWS file to NEWS.txt in the X.Y directory for
python.org; this contains the "full scoop" of changes to
Python since the previous release for this version of Python.
___ Also, update the MD5 checksums.
___ Preview the web page by doing a "make" -- NOT a "make install".
View the page via a file: url.
___ Similarly, edit the ../index.ht file, i.e. the python.org home
page. In the Big Blue Announcement Block, move the paragraph
for the new version up to the top and boldify the phrase
"Python X.YaZ is out". Edit for content, and preview as
above. Do NOT do a "make install" yet!
___ Now we're waiting for the scp to creosote to finish. Da de da,
da de dum, hmm, hmm, dum de dum.
___ Now you need to go to creosote.python.org and move all the files
in place over there. Our policy is that every Python version
gets its own directory, but each directory may contain several
releases. We keep all old releases, moving them into a "prev"
subdirectory when we have a new release.
So, there's a directory called "2.2" which contains
Python-2.2a2.exe and Python-2.2a2.tgz, along with a "prev"
subdirectory containing Python-2.2a1.exe and Python-2.2a1.tgz.
So...
___ On creosote, cd to ~ftp/pub/python/X.Y creating it if
necessary.
___ Move the previous release files to a directory called "prev"
creating the directory if necessary (make sure the directory
has g+ws bits on). If this is the first alpha release of a
new Python version, skip this step.
___ Move the .tgz file and the .exe file to this directory. Make
sure they are world readable. They should also be group
writable, and group-owned by webmaster.
___ md5sum the files and make sure they got uploaded intact.
___ Update the X.Y/bugs.ht file if necessary. It is best to get
BDFL input for this step.
___ Now preview the new-index.ht file once more. IMPORTANT: follow
every link on the page to make sure it goes where you expect it
to go, and that what you expect to be there is there.
___ If everything looks good, move new-index.ht to index.ht and do a
"make install" in this directory. Go up to the parent directory
(i.e. the root of the web page hierarchy) and do a "make
install" there too. You're release is now live!
___ Now it's time to write the announcement for the mailing lists.
This is the fuzzy bit because not much can be automated. You
can use one of Guido's earlier announcements as a template, but
please edit it for content!
Once the announcement is ready, send it to the following
addresses:
python-list@python.org
python-announce@python.org
python-dev@python.org
___ Send a SourceForge News Item about the release. From the
project's "menu bar", select the "News" link; once in News,
select the "Submit" link. Type a suitable subject (e.g. "Python
2.2c1 released" :-) in the Subject box, add some text to the
Details box (at the very least including the release URL at
www.python.org and the fact that you're happy with the release)
and click the SUBMIT button.
Feel free to remove any old news items.
Now it's time to do some cleanup. These steps are very important!
___ Merge the branch back into the trunk! Now that we've released
this branch, we don't need it any more. We've already tagged it
so we can always reproduce it. Note that merging branches is a
bit of a black art, but here's what's worked for us.
___ Check out a completely clean, virgin working directory of the
trunk, by doing this in the directory that is the parent of
your branch working directory python-XYaZ:
% cvs -d <cvsroot> co -d python-clean python/dist/src
___ Run a diff against your branch by doing this in the common
parent directory containing both python-clean and python-XYaZ:
% diff -r python-clean python-22a2 | grep ^diff | grep -v CVS \
> /tmp/diffcmd.sh
___ Edit diffcmd.sh to get rid of files that you know don't have
important changes. You're looking for files that have updates
in the branch that haven't made it to the trunk.
Generally you can ignore any changes to the Doc or Mac
subdirectories, or any changes to Windows related files. The
sub-RMs for those parts will take care of any necessary merges
from the branch to the trunk.
If you've been diligent about merging changes from the trunk
into the branch, there shouldn't be many of these files.
___ Edit /tmp/diffcmd.sh, changing all the -r's into -u's. Run
the /tmp/diffcmd.sh command like so:
% sh /tmp/diffcmd.sh > /tmp/pydiff.txt
___ Attempt to patch your python-clean working directory. Do this
first, noting that --dry-run does not actually apply any
patches, it just makes sure that the patch command runs
successfully to completion:
% patch -p1 --dry-run < /tmp/pydiff.txt
___ If this goes well, run it again, taking out the --dry-run
option. If this fails, or if it prompts you for a file to
patch, try using -p0 instead of -p1. Otherwise, your diff
command was messed up, so try again.
___ cd to python-clean and do a "cvs commit". Use as your log
message something like "Merging the rXYaZ-branch tag back into
the trunk".
___ Edit the file Include/patchlevel.h so that the PY_VERSION
string says something like "X.YaZ+". Note the trailing `+'
indicating that the trunk is going to be moving forward with
development. E.g. the line should look like:
2001-08-23 18:35:32 -04:00
#define PY_VERSION "2.2a2+"
Make sure that the other PY_ version macros contain the
correct values. Commit this change.
___ For the extra paranoid, do a completely clean test of the
release. This includes downloading the tarball from
www.python.org.
___ Make sure the md5 checksums match. Then unpack the tarball,
and do a clean make test.
% make distclean
% ./configure
% make test
To ensure that the regression test suite passes. If not, you
screwed up somewhere!
Step 5 ...
Verify! This can be interleaved with Step 4. Pretend you're a
user: download the files from python.org, and make Python from it.
This step is too easy to overlook, and on several occasions we've
had useless release files. Once a general server problem caused
mysterious corruption of all files; once the source tarball got
built incorrectly; more than once the file upload process on SF
truncated files; and so on.
What Next?
Rejoice. Drink. Be Merry. Write a PEP like this one. Or be
like unto Guido and take A Vacation.
You've just made a Python release!
Actually, there is one more step. You should turn over ownership
of the branch to Jack Jansen. All this means is that now he will
be responsible for making commits to the branch. He's going to
use this to build the MacOS versions. He may send you information
about the Mac release that should be merged into the informational
pages on www.python.org. When he's done, he'll tag the branch
something like "rX.YaZ-mac". He'll also be responsible for
merging any Mac-related changes back into the trunk.
Final Release Notes
The Final release of any major release, e.g. Python 2.2 final, has
special requirements, specifically because it will be one of the
longest lived releases (i.e. betas don't last more than a couple
of weeks, but final releases can last for years!).
For this reason we want to have a higher coordination between the
three major releases: Windows, Mac, and source. The Windows and
source releases benefit from the close proximity of the respective
release-bots. But the Mac-bot, Jack Jansen, is 6 hours away. So
we add this extra step to the release process for a final
release:
___ Hold up the final release until Jack approves, or until we
lose patience <wink>.
Windows Notes
2001-10-25 01:19:19 -04:00
Windows has a GUI installer, various flavors of Windows have
"special limitations", and the Windows installer also packs
precompiled "foreign" binaries (Tcl/Tk, expat, etc). So Windows
testing is tiresome but very necessary.
Concurrent with uploading the installer, Tim installs Python from
it twice: once into the default directory suggested by the
installer, and later into a directory with embedded spaces in its
name. For each installation, he runs the full regression suite
from a DOS box, and both with and without -0.
He also tries *every* shortcut created under Start -> Menu -> the
Python group. When trying IDLE this way, you need to verify that
Help -> Python Documentation works. When trying pydoc this way
(the "Module Docs" Start menu entry), make sure the "Start
Browser" button works, and make sure you can search for a random
module (Tim uses "random" <wink>) and then that the "go to
selected" button works.
It's amazing how much can go wrong here -- and even more amazing
how often last-second checkins break one of these things. If
you're "the Windows geek", keep in mind that you're likely the
only person routinely testing on Windows, and that Windows is
simply a mess.
Repeat all of the above on at least one flavor of Win9x, and one
of NT/2000. On NT/2000, try both an Admin and a plain User (not
Power User) account.
WRT Step 5 above (verify the release media), since by the time
release files are ready to download Tim has generally run many
Windows tests on the installer he uploaded, he usually doesn't do
anything for Step 5 except a full byte-comparison ("fc /b" if
using a Windows shell) of the downloaded file against the file he
uploaded.
Copyright
This document has been placed in the public domain.
Local Variables:
mode: indented-text
indent-tabs-mode: nil
End: