python-peps/pep-0008.txt

PEP: 8
Title: Style Guide for Python Code
Version: $Revision$
Author: guido@python.org (Guido van Rossum),
    barry@zope.com (Barry Warsaw)
Status: Active
Type: Informational
Created: 05-Jul-2001
Post-History: 05-Jul-2001


Introduction

    This document gives coding conventions for the Python code
    comprising the standard library for the main Python distribution.
    Please see the companion informational PEP describing style
    guidelines for the C code in the C implementation of Python[1].

    This document was adapted from Guido's original Python Style
    Guide essay[2], with some additions from Barry's style guide[5].
    Where there's conflict, Guido's style rules for the purposes of
    this PEP.  This PEP may still be incomplete (in fact, it may never
    be finished <wink>).


A Foolish Consistency is the Hobgoblin of Little Minds

    A style guide is about consistency.  Consistency with this style
    guide is important.  Consistency within a project is more
    important. Consistency within one module or function is most
    important.

    But most importantly: know when to be inconsistent -- sometimes
    the style guide just doesn't apply.  When in doubt, use your best
    judgement.  Look at other examples and decide what looks best.
    And don't hesitate to ask!

    Two good reasons to break a particular rule:

    (1) When applying the rule would make the code less readable, even
        for someone who is used to reading code that follows the rules.

    (2) To be consistent with surrounding code that also breaks it
        (maybe for historic reasons) -- although this is also an
        opportunity to clean up someone else's mess (in true XP style).


Code lay-out

  Indentation

    Use the default of Emacs' Python-mode: 4 spaces for one
    indentation level.  For really old code that you don't want to
    mess up, you can continue to use 8-space tabs.  Emacs Python-mode
    auto-detects the prevailing indentation level used in a file and
    sets its indentation parameters accordingly.

  Tabs or Spaces?

    Never mix tabs and spaces.  The most popular way of indenting
    Python is with spaces only.  The second-most popular way is with
    tabs only.  Code indented with a mixture of tabs and spaces should
    be converted to using spaces exclusively.  (In Emacs, select the
    whole buffer and hit ESC-x untabify.)  When invoking the python
    command line interpreter with the -t option, it issues warnings
    about code that illegally mixes tabs and spaces.  When using -tt
    these warnings become errors.  These options are highly
    recommended!

    For new projects, spaces-only are strongly recommended over tabs.
    Most editors have features that make this easy to do.  (In Emacs,
    make sure indent-tabs-mode is nil).

  Maximum Line Length

    There are still many devices around that are limited to 80
    character lines; plus, limiting windows to 80 characters makes it
    possible to have several windows side-by-side.  The default
    wrapping on such devices looks ugly.  Therefore, please limit all
    lines to a maximum of 79 characters (Emacs wraps lines that are
    exactly 80 characters long).  For flowing long blocks of text
    (docstrings or comments), limiting the length to 72 characters is
    recommended.

    The preferred way of wrapping long lines is by using Python's
    implied line continuation inside parentheses, brackets and braces.
    If necessary, you can add an extra pair of parentheses around an
    expression, but sometimes using a backslash looks better.  Make
    sure to indent the continued line appropriately.  Emacs
    Python-mode does this right.  Some examples:

    class Rectangle(Blob):

        def __init__(self, width, height,
                     color='black', emphasis=None, highlight=0):
            if width == 0 and height == 0 and \
               color == 'red' and emphasis == 'strong' or \
               highlight > 100:
                raise ValueError, "sorry, you lose"
            if width == 0 and height == 0 and (color == 'red' or
                                               emphasis is None):
                raise ValueError, "I don't think so"
            Blob.__init__(self, width, height,
                          color, emphasis, highlight)

  Blank Lines

    Separate top-level function and class definitions with two blank
    lines.  Method definitions inside a class are separated by a
    single blank line.  Extra blank lines may be used (sparingly) to
    separate groups of related functions.  Blank lines may be omitted
    between a bunch of related one-liners (e.g. a set of dummy
    implementations).

    When blank lines are used to separate method definitions, there is
    also a blank line between the `class' line and the first method
    definition.

    Use blank lines in functions, sparingly, to indicate logical
    sections.

    Python accepts the control-L (i.e. ^L) form feed character as
    whitespace; Emacs (and some printing tools) treat these
    characters as page separators, so you may use them to separate
    pages of related sections of your file.


Imports

    - Imports should usually be on separate lines, e.g.:

        No:  import sys, os
        Yes: import sys
             import os

      it's okay to say this though:

        from types import StringType, ListType

    - Imports are always put at the top of the file, just after any
      module comments and docstrings, and before module globals and
      constants.  Imports should be grouped, with the order being

      1. standard library imports
      2. related major package imports (i.e. all email package imports next)
      3. application specific imports

      You should put a blank line between each group of imports.

    - Relative imports for intra-package imports are highly
      discouraged.  Always use the absolute package path for all
      imports.

    - When importing a class from a class-containing module, it's usually
      okay to spell this

        from MyClass import MyClass
        from foo.bar.YourClass import YourClass

      If this spelling causes local name clashes, then spell them

        import MyClass
        import foo.bar.YourClass

      and use "MyClass.MyClass" and "foo.bar.YourClass.YourClass"


Whitespace in Expressions and Statements

  Pet Peeves

    Guido hates whitespace in the following places:

    - Immediately inside parentheses, brackets or braces, as in:
      "spam( ham[ 1 ], { eggs: 2 } )".  Always write this as
      "spam(ham[1], {eggs: 2})".

    - Immediately before a comma, semicolon, or colon, as in:
      "if x == 4 : print x , y ; x , y = y , x".  Always write this as
      "if x == 4: print x, y; x, y = y, x".

    - Immediately before the open parenthesis that starts the argument
      list of a function call, as in "spam (1)".  Always write
      this as "spam(1)".

    - Immediately before the open parenthesis that starts an indexing or
      slicing, as in: "dict ['key'] = list [index]".  Always
      write this as "dict['key'] = list[index]".

    - More than one space around an assignment (or other) operator to
      align it with another, as in:

          x             = 1
          y             = 2
          long_variable = 3

      Always write this as

          x = 1
          y = 2
          long_variable = 3

    (Don't bother to argue with him on any of the above -- Guido's
    grown accustomed to this style over 20 years.)


  Other Recommendations

    - Always surround these binary operators with a single space on
      either side: assignment (=), comparisons (==, <, >, !=, <>, <=,
      >=, in, not in, is, is not), Booleans (and, or, not).

    - Use your better judgment for the insertion of spaces around
      arithmetic operators.  Always be consistent about whitespace on
      either side of a binary operator.  Some examples:

          i = i+1
          submitted = submitted + 1
          x = x*2 - 1
          hypot2 = x*x + y*y
          c = (a+b) * (a-b)
          c = (a + b) * (a - b)

    - Don't use spaces around the '=' sign when used to indicate a
      keyword argument or a default parameter value.  For instance:

          def complex(real, imag=0.0):
              return magic(r=real, i=imag)


Comments

    Comments that contradict the code are worse than no comments.
    Always make a priority of keeping the comments up-to-date when the
    code changes!

    Comments should be complete sentences.  If a comment is a phrase
    or sentence, its first word should be capitalized, unless it is an
    identifier that begins with a lower case letter (never alter the
    case of identifiers!).

    If a comment is short, the period at the end is best omitted.
    Block comments generally consist of one or more paragraphs built
    out of complete sentences, and each sentence should end in a
    period.

    You should use two spaces after a sentence-ending period, since it
    makes Emacs wrapping and filling work consistenty.

    When writing English, Strunk and White apply.

    Python coders from non-English speaking countries: please write
    your comments in English, unless you are 120% sure that the code
    will never be read by people who don't speak your language.


  Block Comments

    Block comments generally apply to some (or all) code that follows
    them, and are indented to the same level as that code.  Each line
    of a block comment starts with a # and a single space (unless it
    is indented text inside the comment).  Paragraphs inside a block
    comment are separated by a line containing a single #.  Block
    comments are best surrounded by a blank line above and below them
    (or two lines above and a single line below for a block comment at
    the start of a a new section of function definitions).

  Inline Comments

    An inline comment is a comment on the same line as a statement.
    Inline comments should be used sparingly.  Inline comments should
    be separated by at least two spaces from the statement.  They
    should start with a # and a single space.

    Inline comments are unnecessary and in fact distracting if they state
    the obvious.  Don't do this:

        x = x+1                 # Increment x

    But sometimes, this is useful:

        x = x+1                 # Compensate for border


Documentation Strings

    Conventions for writing good documentation strings
    (a.k.a. "docstrings") are immortalized in PEP 257 [3].

    - Write docstrings for all public modules, functions, classes, and
      methods.  Docstrings are not necessary for non-public methods,
      but you should have a comment that describes what the method
      does.  This comment should appear after the "def" line.

    - PEP 257 describes good docstring conventions.  Note that most
      importantly, the """ that ends a multiline docstring should be
      on a line by itself, e.g.:

      """Return a foobang

      Optional plotz says to frobnicate the bizbaz first.
      """

    - For one liner docstrings, it's okay to keep the closing """ on
      the same line.


Version Bookkeeping

    If you have to have RCS or CVS crud in your source file, do it as
    follows.

        __version__ = "$Revision$"
        # $Source$

    These lines should be included after the module's docstring,
    before any other code, separated by a blank line above and
    below.


Naming Conventions

    The naming conventions of Python's library are a bit of a mess, so
    we'll never get this completely consistent -- nevertheless, here
    are some guidelines.

  Descriptive: Naming Styles

    There are a lot of different naming styles.  It helps to be able
    to recognize what naming style is being used, independently from
    what they are used for.

    The following naming styles are commonly distinguished:

    - x (single lowercase letter)

    - X (single uppercase letter)

    - lowercase

    - lower_case_with_underscores

    - UPPERCASE

    - UPPER_CASE_WITH_UNDERSCORES

    - CapitalizedWords (or CapWords, or CamelCase -- so named because
      of the bumpy look of its letters[4])

    - mixedCase (differs from CapitalizedWords by initial lowercase
      character!)

    - Capitalized_Words_With_Underscores (ugly!)

    There's also the style of using a short unique prefix to group
    related names together.  This is not used much in Python, but it
    is mentioned for completeness.  For example, the os.stat()
    function returns a tuple whose items traditionally have names like
    st_mode, st_size, st_mtime and so on.  The X11 library uses a
    leading X for all its public functions.  (In Python, this style is
    generally deemed unnecessary because attribute and method names
    are prefixed with an object, and function names are prefixed with
    a module name.)

    In addition, the following special forms using leading or trailing
    underscores are recognized (these can generally be combined with any
    case convention):

    - _single_leading_underscore: weak "internal use" indicator
      (e.g. "from M import *" does not import objects whose name
      starts with an underscore).

    - single_trailing_underscore_: used by convention to avoid
      conflicts with Python keyword, e.g.
      "Tkinter.Toplevel(master, class_='ClassName')".

    - __double_leading_underscore: class-private names as of Python 1.4.

    - __double_leading_and_trailing_underscore__: "magic" objects or
      attributes that live in user-controlled namespaces,
      e.g. __init__, __import__ or __file__.  Sometimes these are
      defined by the user to trigger certain magic behavior
      (e.g. operator overloading); sometimes these are inserted by the
      infrastructure for its own use or for debugging purposes.  Since
      the infrastructure (loosely defined as the Python interpreter
      and the standard library) may decide to grow its list of magic
      attributes in future versions, user code should generally
      refrain from using this convention for its own use.  User code
      that aspires to become part of the infrastructure could combine
      this with a short prefix inside the underscores,
      e.g. __bobo_magic_attr__.

  Prescriptive: Naming Conventions

    Names to Avoid

      Never use the characters `l' (lowercase letter el), `O'
      (uppercase letter oh), or `I' (uppercase letter eye) as single
      character variable names.  In some fonts, these characters are
      indistinguisable from the numerals one and zero.  When tempted
      to use `l' use `L' instead.

    Module Names

      Module names can be either CapWords or lowercase.  There is no
      unambiguous convention to decide which to use.  Modules that
      export a single class (or a number of closely related classes,
      plus some additional support) are often named in CapWords, with
      the module name being the same as the class name (e.g. the
      standard StringIO module).  Modules that export a bunch of
      functions are usually named in all lowercase.

      Since module names are mapped to file names, and some file
      systems are case insensitive and truncate long names, it is
      important that module names be chosen to be fairly short and not
      in conflict with other module names that only differ in the case
      -- this won't be a problem on Unix, but it may be a problem when
      the code is transported to Mac or Windows.

      There is an emerging convention that when an extension module
      written in C or C++ has an accompanying Python module that
      provides a higher level (e.g. more object oriented) interface,
      the Python module's name CapWords, while the C/C++ module is
      named in all lowercase and has a leading underscore
      (e.g. _socket).

      Python packages generally have a short all lowercase name.

    Class Names

      Almost without exception, class names use the CapWords
      convention.  Classes for internal use have a leading underscore
      in addition.

    Exception Names

      If a module defines a single exception raised for all sorts of
      conditions, it is generally called "error" or "Error".  It seems
      that built-in (extension) modules use "error" (e.g. os.error),
      while Python modules generally use "Error" (e.g. xdrlib.Error).
      The trend seems to be toward CapWords exception names.

    Function Names

      Plain functions exported by a module can either use the CapWords
      style or lowercase (or lower_case_with_underscores).  There is
      no strong preference, but it seems that the CapWords style is
      used for functions that provide major functionality
      (e.g. nstools.WorldOpen()), while lowercase is used more for
      "utility" functions (e.g. pathhack.kos_root()).

    Global Variable Names

      (Let's hope that these variables are meant for use inside one
      module only.)  The conventions are about the same as those for
      exported functions.  Modules that are designed for use via "from
      M import *" should prefix their globals (and internal functions
      and classes) with an underscore to prevent exporting them.

    Method Names

      The story is largely the same as for functions.  Use lowercase
      for methods accessed by other classes or functions that are part
      of the implementation of an object type.  Use one leading
      underscore for "internal" methods and instance variables when
      there is no chance of a conflict with subclass or superclass
      attributes or when a subclass might actually need access to
      them.  Use two leading underscores (class-private names,
      enforced by Python 1.4) in those cases where it is important
      that only the current class accesses an attribute.  (But realize
      that Python contains enough loopholes so that an insistent user
      could gain access nevertheless, e.g. via the __dict__ attribute.)

    Designing for inheritance

      Always decide whether a class's methods and instance variables
      should be public or non-public.  In general, never make data
      variables public unless you're implementing essentially a
      record.  It's almost always preferrable to give a functional
      interface to your class instead (and some Python 2.2
      developments will make this much nicer).

      Also decide whether your attributes should be private or not.
      The difference between private and non-public is that the former
      will never be useful for a derived class, while the latter might
      be.  Yes, you should design your classes with inheritence in
      mind!

      Private attributes should have two leading underscores, no
      trailing underscores.

      Non-public attributes should have a single leading underscore,
      no trailing underscores.

      Public attributes should have no leading or trailing
      underscores, unless they conflict with reserved words, in which
      case, a single trailing underscore is preferrable to a leading
      one, or a corrupted spelling, e.g. class_ rather than klass.
      (This last point is a bit controversial; if you prefer klass
      over class_ then just be consistent. :).


Programming Recommendations

    - Comparisons to singletons like None should always be done with
      'is' or 'is not'.  Also, beware of writing "if x" when you
      really mean "if x is not None" -- e.g. when testing whether a
      variable or argument that defaults to None was set to some other
      value.  The other value might be a value that's false in a
      Boolean context!

    - Class-based exceptions are always preferred over string-based
      exceptions.  Modules or packages should define their own
      domain-specific base exception class, which should be subclassed
      from the built-in Exception class.  Always include a class
      docstring.  E.g.:

        class MessageError(Exception):
            """Base class for errors in the email package."""

    - Avoid the use of the string module; instead use string methods.
      These are always much faster and share the same API with unicode
      strings.

    - Avoid slicing strings when checking for prefixes or suffixes.
      Use startswith() and endswith() instead, since they are faster,
      cleaner and less error prone.  E.g.:

        No:  if foo[:3] == 'bar':
        Yes: if foo.startswith('bar'):

      The exception is if your code must work with Python 1.5.2 (but
      let's hope not!).

    - Object type comparisons should always use isinstance() instead
      of comparing types directly.  E.g.

        No:  if type(obj) is type(1):
        Yes: if isinstance(obj, int):

      When checking if an object is a string, keep in mind that it
      might be a unicode string too!  In Python 2.2, the types module
      has the StringTypes type defined for that purpose, e.g.:

        from types import StringTypes:
        if isinstance(strorunicodeobj, StringTypes):

    - For sequences, (strings, lists, tuples), use the fact that empty
      sequences are false, so "if not seq" or "if seq" is preferable
      to "if len(seq)" or "if not len(seq)".

    - Don't write string literals that rely on significant trailing
      whitespace.  Such trailing whitespace is visually
      indistinguishable and some editors (or more recently,
      reindent.py) will trim them.

    - Don't compare boolean values to True or False using == (bool
      types are new in Python 2.3):

        No:  if greeting == True: print "Hello world"
        Yes: if greeting: print "Hello world"


References

    [1] PEP 7, Style Guide for C Code, van Rossum

    [2] http://www.python.org/doc/essays/styleguide.html

    [3] PEP 257, Docstring Conventions, Goodger, van Rossum

    [4] http://www.wikipedia.com/wiki/CamelCase

    [5] Barry's GNU Mailman/mimelib style guide
        http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/mimelib/mimelib/STYLEGUIDE.txt?rev=1.1&content-type=text/vnd.viewcvs-markup


Copyright

    This document has been placed in the public domain.



Local Variables:
mode: indented-text
indent-tabs-mode: nil
End: