PEP: 472 Title: Support for indexing with keyword arguments Version: $Revision$ Last-Modified: $Date$ Author: Stefano Borini, Joseph Martinot-Lagarde Discussions-To: python-ideas@python.org Status: Rejected Type: Standards Track Content-Type: text/x-rst Created: 24-Jun-2014 Python-Version: 3.6 Post-History: 02-Jul-2014 Resolution: https://mail.python.org/pipermail/python-dev/2019-March/156693.html Abstract ======== This PEP proposes an extension of the indexing operation to support keyword arguments. Notations in the form ``a[K=3,R=2]`` would become legal syntax. For future-proofing considerations, ``a[1:2, K=3, R=4]`` are considered and may be allowed as well, depending on the choice for implementation. In addition to a change in the parser, the index protocol (``__getitem__``, ``__setitem__`` and ``__delitem__``) will also potentially require adaptation. Motivation ========== The indexing syntax carries a strong semantic content, differentiating it from a method call: it implies referring to a subset of data. We believe this semantic association to be important, and wish to expand the strategies allowed to refer to this data. As a general observation, the number of indices needed by an indexing operation depends on the dimensionality of the data: one-dimensional data (e.g. a list) requires one index (e.g. ``a[3]``), two-dimensional data (e.g. a matrix) requires two indices (e.g. ``a[2,3]``) and so on. Each index is a selector along one of the axes of the dimensionality, and the position in the index tuple is the metainformation needed to associate each index to the corresponding axis. The current python syntax focuses exclusively on position to express the association to the axes, and also contains syntactic sugar to refer to non-punctiform selection (slices) :: >>> a[3] # returns the fourth element of a >>> a[1:10:2] # slice notation (extract a non-trivial data subset) >>> a[3,2] # multiple indexes (for multidimensional arrays) The additional notation proposed in this PEP would allow notations involving keyword arguments in the indexing operation, e.g. :: >>> a[K=3, R=2] which would allow to refer to axes by conventional names. One must additionally consider the extended form that allows both positional and keyword specification :: >>> a[3,R=3,K=4] This PEP will explore different strategies to enable the use of these notations. Use cases ========= The following practical use cases present two broad categories of usage of a keyworded specification: Indexing and contextual option. For indexing: 1. To provide a more communicative meaning to the index, preventing e.g. accidental inversion of indexes :: >>> gridValues[x=3, y=5, z=8] >>> rain[time=0:12, location=location] 2. In some domain, such as computational physics and chemistry, the use of a notation such as ``Basis[Z=5]`` is a Domain Specific Language notation to represent a level of accuracy :: >>> low_accuracy_energy = computeEnergy(molecule, BasisSet[Z=3]) In this case, the index operation would return a basis set at the chosen level of accuracy (represented by the parameter Z). The reason behind an indexing is that the BasisSet object could be internally represented as a numeric table, where rows (the "coefficient" axis, hidden to the user in this example) are associated to individual elements (e.g. row 0:5 contains coefficients for element 1, row 5:8 coefficients for element 2) and each column is associated to a given degree of accuracy ("accuracy" or "Z" axis) so that first column is low accuracy, second column is medium accuracy and so on. With that indexing, the user would obtain another object representing the contents of the column of the internal table for accuracy level 3. Additionally, the keyword specification can be used as an option contextual to the indexing. Specifically: 1. A "default" option allows to specify a default return value when the index is not present :: >>> lst = [1, 2, 3] >>> value = lst[5, default=0] # value is 0 2. For a sparse dataset, to specify an interpolation strategy to infer a missing point from e.g. its surrounding data. :: >>> value = array[1, 3, interpolate=spline_interpolator] 3. A unit could be specified with the same mechanism :: >>> value = array[1, 3, unit="degrees"] How the notation is interpreted is up to the implementing class. Current implementation ====================== Currently, the indexing operation is handled by methods ``__getitem__``, ``__setitem__`` and ``__delitem__``. These methods' signature accept one argument for the index (with ``__setitem__`` accepting an additional argument for the set value). In the following, we will analyze ``__getitem__(self, idx)`` exclusively, with the same considerations implied for the remaining two methods. When an indexing operation is performed, ``__getitem__(self, idx)`` is called. Traditionally, the full content between square brackets is turned into a single object passed to argument ``idx``: - When a single element is passed, e.g. ``a[2]``, ``idx`` will be ``2``. - When multiple elements are passed, they must be separated by commas: ``a[2, 3]``. In this case, ``idx`` will be a tuple ``(2, 3)``. With ``a[2, 3, "hello", {}]`` ``idx`` will be ``(2, 3, "hello", {})``. - A slicing notation e.g. ``a[2:10]`` will produce a slice object, or a tuple containing slice objects if multiple values were passed. Except for its unique ability to handle slice notation, the indexing operation has similarities to a plain method call: it acts like one when invoked with only one element; If the number of elements is greater than one, the ``idx`` argument behaves like a ``*args``. However, as stated in the Motivation section, an indexing operation has the strong semantic implication of extraction of a subset out of a larger set, which is not automatically associated to a regular method call unless appropriate naming is chosen. Moreover, its different visual style is important for readability. Specifications ============== The implementation should try to preserve the current signature for ``__getitem__``, or modify it in a backward-compatible way. We will present different alternatives, taking into account the possible cases that need to be addressed :: C0. a[1]; a[1,2] # Traditional indexing C1. a[Z=3] C2. a[Z=3, R=4] C3. a[1, Z=3] C4. a[1, Z=3, R=4] C5. a[1, 2, Z=3] C6. a[1, 2, Z=3, R=4] C7. a[1, Z=3, 2, R=4] # Interposed ordering Strategy "Strict dictionary" ---------------------------- This strategy acknowledges that ``__getitem__`` is special in accepting only one object, and the nature of that object must be non-ambiguous in its specification of the axes: it can be either by order, or by name. As a result of this assumption, in presence of keyword arguments, the passed entity is a dictionary and all labels must be specified. :: C0. a[1]; a[1,2] -> idx = 1; idx = (1, 2) C1. a[Z=3] -> idx = {"Z": 3} C2. a[Z=3, R=4] -> idx = {"Z": 3, "R": 4} C3. a[1, Z=3] -> raise SyntaxError C4. a[1, Z=3, R=4] -> raise SyntaxError C5. a[1, 2, Z=3] -> raise SyntaxError C6. a[1, 2, Z=3, R=4] -> raise SyntaxError C7. a[1, Z=3, 2, R=4] -> raise SyntaxError Pros '''' - Strong conceptual similarity between the tuple case and the dictionary case. In the first case, we are specifying a tuple, so we are naturally defining a plain set of values separated by commas. In the second, we are specifying a dictionary, so we are specifying a homogeneous set of key/value pairs, as in ``dict(Z=3, R=4)``; - Simple and easy to parse on the ``__getitem__`` side: if it gets a tuple, determine the axes using positioning. If it gets a dictionary, use the keywords. - C interface does not need changes. Neutral ''''''' - Degeneracy of ``a[{"Z": 3, "R": 4}]`` with ``a[Z=3, R=4]`` means the notation is syntactic sugar. Cons '''' - Very strict. - Destroys ordering of the passed arguments. Preserving the order would be possible with an OrderedDict as drafted by :pep:`468`. - Does not allow use cases with mixed positional/keyword arguments such as ``a[1, 2, default=5]``. Strategy "mixed dictionary" --------------------------- This strategy relaxes the above constraint to return a dictionary containing both numbers and strings as keys. :: C0. a[1]; a[1,2] -> idx = 1; idx = (1, 2) C1. a[Z=3] -> idx = {"Z": 3} C2. a[Z=3, R=4] -> idx = {"Z": 3, "R": 4} C3. a[1, Z=3] -> idx = { 0: 1, "Z": 3} C4. a[1, Z=3, R=4] -> idx = { 0: 1, "Z": 3, "R": 4} C5. a[1, 2, Z=3] -> idx = { 0: 1, 1: 2, "Z": 3} C6. a[1, 2, Z=3, R=4] -> idx = { 0: 1, 1: 2, "Z": 3, "R": 4} C7. a[1, Z=3, 2, R=4] -> idx = { 0: 1, "Z": 3, 2: 2, "R": 4} Pros '''' - Opens for mixed cases. Cons '''' - Destroys ordering information for string keys. We have no way of saying if ``"Z"`` in C7 was in position 1 or 3. - Implies switching from a tuple to a dict as soon as one specified index has a keyword argument. May be confusing to parse. Strategy "named tuple" ----------------------- Return a named tuple for ``idx`` instead of a tuple. Keyword arguments would obviously have their stated name as key, and positional argument would have an underscore followed by their order: :: C0. a[1]; a[1,2] -> idx = 1; idx = (_0=1, _1=2) C1. a[Z=3] -> idx = (Z=3) C2. a[Z=3, R=2] -> idx = (Z=3, R=2) C3. a[1, Z=3] -> idx = (_0=1, Z=3) C4. a[1, Z=3, R=2] -> idx = (_0=1, Z=3, R=2) C5. a[1, 2, Z=3] -> idx = (_0=1, _2=2, Z=3) C6. a[1, 2, Z=3, R=4] -> (_0=1, _1=2, Z=3, R=4) C7. a[1, Z=3, 2, R=4] -> (_0=1, Z=3, _1=2, R=4) or (_0=1, Z=3, _2=2, R=4) or raise SyntaxError The required typename of the namedtuple could be ``Index`` or the name of the argument in the function definition, it keeps the ordering and is easy to analyse by using the ``_fields`` attribute. It is backward compatible, provided that C0 with more than one entry now passes a namedtuple instead of a plain tuple. Pros '''' - Looks nice. namedtuple transparently replaces tuple and gracefully degrades to the old behavior. - Does not require a change in the C interface Cons '''' - According to some sources [#namedtuple]_ namedtuple is not well developed. To include it as such important object would probably require rework and improvement; - The namedtuple fields, and thus the type, will have to change according to the passed arguments. This can be a performance bottleneck, and makes it impossible to guarantee that two subsequent index accesses get the same Index class; - the ``_n`` "magic" fields are a bit unusual, but ipython already uses them for result history. - Python currently has no builtin namedtuple. The current one is available in the "collections" module in the standard library. - Differently from a function, the two notations ``gridValues[x=3, y=5, z=8]`` and ``gridValues[3,5,8]`` would not gracefully match if the order is modified at call time (e.g. we ask for ``gridValues[y=5, z=8, x=3])``. In a function, we can pre-define argument names so that keyword arguments are properly matched. Not so in ``__getitem__``, leaving the task for interpreting and matching to ``__getitem__`` itself. Strategy "New argument contents" -------------------------------- In the current implementation, when many arguments are passed to ``__getitem__``, they are grouped in a tuple and this tuple is passed to ``__getitem__`` as the single argument ``idx``. This strategy keeps the current signature, but expands the range of variability in type and contents of ``idx`` to more complex representations. We identify four possible ways to implement this strategy: - **P1**: uses a single dictionary for the keyword arguments. - **P2**: uses individual single-item dictionaries. - **P3**: similar to **P2**, but replaces single-item dictionaries with a ``(key, value)`` tuple. - **P4**: similar to **P2**, but uses a special and additional new object: ``keyword()`` Some of these possibilities lead to degenerate notations, i.e. indistinguishable from an already possible representation. Once again, the proposed notation becomes syntactic sugar for these representations. Under this strategy, the old behavior for C0 is unchanged. :: C0: a[1] -> idx = 1 # integer a[1,2] -> idx = (1,2) # tuple In C1, we can use either a dictionary or a tuple to represent key and value pair for the specific indexing entry. We need to have a tuple with a tuple in C1 because otherwise we cannot differentiate ``a["Z", 3]`` from ``a[Z=3]``. :: C1: a[Z=3] -> idx = {"Z": 3} # P1/P2 dictionary with single key or idx = (("Z", 3),) # P3 tuple of tuples or idx = keyword("Z", 3) # P4 keyword object As you can see, notation P1/P2 implies that ``a[Z=3]`` and ``a[{"Z": 3}]`` will call ``__getitem__`` passing the exact same value, and is therefore syntactic sugar for the latter. Same situation occurs, although with different index, for P3. Using a keyword object as in P4 would remove this degeneracy. For the C2 case: :: C2. a[Z=3, R=4] -> idx = {"Z": 3, "R": 4} # P1 dictionary/ordereddict or idx = ({"Z": 3}, {"R": 4}) # P2 tuple of two single-key dict or idx = (("Z", 3), ("R", 4)) # P3 tuple of tuples or idx = (keyword("Z", 3), keyword("R", 4) ) # P4 keyword objects P1 naturally maps to the traditional ``**kwargs`` behavior, however it breaks the convention that two or more entries for the index produce a tuple. P2 preserves this behavior, and additionally preserves the order. Preserving the order would also be possible with an OrderedDict as drafted by :pep:`468`. The remaining cases are here shown: :: C3. a[1, Z=3] -> idx = (1, {"Z": 3}) # P1/P2 or idx = (1, ("Z", 3)) # P3 or idx = (1, keyword("Z", 3)) # P4 C4. a[1, Z=3, R=4] -> idx = (1, {"Z": 3, "R": 4}) # P1 or idx = (1, {"Z": 3}, {"R": 4}) # P2 or idx = (1, ("Z", 3), ("R", 4)) # P3 or idx = (1, keyword("Z", 3), keyword("R", 4)) # P4 C5. a[1, 2, Z=3] -> idx = (1, 2, {"Z": 3}) # P1/P2 or idx = (1, 2, ("Z", 3)) # P3 or idx = (1, 2, keyword("Z", 3)) # P4 C6. a[1, 2, Z=3, R=4] -> idx = (1, 2, {"Z":3, "R": 4}) # P1 or idx = (1, 2, {"Z": 3}, {"R": 4}) # P2 or idx = (1, 2, ("Z", 3), ("R", 4)) # P3 or idx = (1, 2, keyword("Z", 3), keyword("R", 4)) # P4 C7. a[1, Z=3, 2, R=4] -> idx = (1, 2, {"Z": 3, "R": 4}) # P1. Pack the keyword arguments. Ugly. or raise SyntaxError # P1. Same behavior as in function calls. or idx = (1, {"Z": 3}, 2, {"R": 4}) # P2 or idx = (1, ("Z", 3), 2, ("R", 4)) # P3 or idx = (1, keyword("Z", 3), 2, keyword("R", 4)) # P4 Pros '''' - Signature is unchanged; - P2/P3 can preserve ordering of keyword arguments as specified at indexing, - P1 needs an OrderedDict, but would destroy interposed ordering if allowed: all keyword indexes would be dumped into the dictionary; - Stays within traditional types: tuples and dicts. Evt. OrderedDict; - Some proposed strategies are similar in behavior to a traditional function call; - The C interface for ``PyObject_GetItem`` and family would remain unchanged. Cons '''' - Apparently complex and wasteful; - Degeneracy in notation (e.g. ``a[Z=3]`` and ``a[{"Z":3}]`` are equivalent and indistinguishable notations at the ``__[get|set|del]item__`` level). This behavior may or may not be acceptable. - for P4, an additional object similar in nature to slice() is needed, but only to disambiguate the above degeneracy. - ``idx`` type and layout seems to change depending on the whims of the caller; - May be complex to parse what is passed, especially in the case of tuple of tuples; - P2 Creates a lot of single keys dictionary as members of a tuple. Looks ugly. P3 would be lighter and easier to use than the tuple of dicts, and still preserves order (unlike the regular dict), but would result in clumsy extraction of keywords. Strategy "kwargs argument" --------------------------- ``__getitem__`` accepts an optional ``**kwargs`` argument which should be keyword only. ``idx`` also becomes optional to support a case where no non-keyword arguments are allowed. The signature would then be either :: __getitem__(self, idx) __getitem__(self, idx, **kwargs) __getitem__(self, **kwargs) Applied to our cases would produce: :: C0. a[1,2] -> idx=(1,2); kwargs={} C1. a[Z=3] -> idx=None ; kwargs={"Z":3} C2. a[Z=3, R=4] -> idx=None ; kwargs={"Z":3, "R":4} C3. a[1, Z=3] -> idx=1 ; kwargs={"Z":3} C4. a[1, Z=3, R=4] -> idx=1 ; kwargs={"Z":3, "R":4} C5. a[1, 2, Z=3] -> idx=(1,2); kwargs={"Z":3} C6. a[1, 2, Z=3, R=4] -> idx=(1,2); kwargs={"Z":3, "R":4} C7. a[1, Z=3, 2, R=4] -> raise SyntaxError # in agreement to function behavior Empty indexing ``a[]`` of course remains invalid syntax. Pros '''' - Similar to function call, evolves naturally from it; - Use of keyword indexing with an object whose ``__getitem__`` doesn't have a kwargs will fail in an obvious way. That's not the case for the other strategies. Cons '''' - It doesn't preserve order, unless an OrderedDict is used; - Forbids C7, but is it really needed? - Requires a change in the C interface to pass an additional PyObject for the keyword arguments. C interface =========== As briefly introduced in the previous analysis, the C interface would potentially have to change to allow the new feature. Specifically, ``PyObject_GetItem`` and related routines would have to accept an additional ``PyObject *kw`` argument for Strategy "kwargs argument". The remaining strategies would not require a change in the C function signatures, but the different nature of the passed object would potentially require adaptation. Strategy "named tuple" would behave correctly without any change: the class returned by the factory method in collections returns a subclass of tuple, meaning that ``PyTuple_*`` functions can handle the resulting object. Alternative Solutions ===================== In this section, we present alternative solutions that would workaround the missing feature and make the proposed enhancement not worth of implementation. Use a method ------------ One could keep the indexing as is, and use a traditional ``get()`` method for those cases where basic indexing is not enough. This is a good point, but as already reported in the introduction, methods have a different semantic weight from indexing, and you can't use slices directly in methods. Compare e.g. ``a[1:3, Z=2]`` with ``a.get(slice(1,3), Z=2)``. The authors however recognize this argument as compelling, and the advantage in semantic expressivity of a keyword-based indexing may be offset by a rarely used feature that does not bring enough benefit and may have limited adoption. Emulate requested behavior by abusing the slice object ------------------------------------------------------ This extremely creative method exploits the slice objects' behavior, provided that one accepts to use strings (or instantiate properly named placeholder objects for the keys), and accept to use ":" instead of "=". :: >>> a["K":3] slice('K', 3, None) >>> a["K":3, "R":4] (slice('K', 3, None), slice('R', 4, None)) >>> While clearly smart, this approach does not allow easy inquire of the key/value pair, it's too clever and esotheric, and does not allow to pass a slice as in ``a[K=1:10:2]``. However, Tim Delaney comments "I really do think that ``a[b=c, d=e]`` should just be syntax sugar for ``a['b':c, 'd':e]``. It's simple to explain, and gives the greatest backwards compatibility. In particular, libraries that already abused slices in this way will just continue to work with the new syntax." We think this behavior would produce inconvenient results. The library Pandas uses strings as labels, allowing notation such as :: >>> a[:, "A":"F"] to extract data from column "A" to column "F". Under the above comment, this notation would be equally obtained with :: >>> a[:, A="F"] which is weird and collides with the intended meaning of keyword in indexing, that is, specifying the axis through conventional names rather than positioning. Pass a dictionary as an additional index ---------------------------------------- :: >>> a[1, 2, {"K": 3}] this notation, although less elegant, can already be used and achieves similar results. It's evident that the proposed Strategy "New argument contents" can be interpreted as syntactic sugar for this notation. Additional Comments =================== Commenters also expressed the following relevant points: Relevance of ordering of keyword arguments ------------------------------------------ As part of the discussion of this PEP, it's important to decide if the ordering information of the keyword arguments is important, and if indexes and keys can be ordered in an arbitrary way (e.g. ``a[1,Z=3,2,R=4]``). :pep:`468` tries to address the first point by proposing the use of an ordereddict, however one would be inclined to accept that keyword arguments in indexing are equivalent to kwargs in function calls, and therefore as of today equally unordered, and with the same restrictions. Need for homogeneity of behavior -------------------------------- Relative to Strategy "New argument contents", a comment from Ian Cordasco points out that "it would be unreasonable for just one method to behave totally differently from the standard behaviour in Python. It would be confusing for only ``__getitem__`` (and ostensibly, ``__setitem__``) to take keyword arguments but instead of turning them into a dictionary, turn them into individual single-item dictionaries." We agree with his point, however it must be pointed out that ``__getitem__`` is already special in some regards when it comes to passed arguments. Chris Angelico also states: "it seems very odd to start out by saying "here, let's give indexing the option to carry keyword args, just like with function calls", and then come back and say "oh, but unlike function calls, they're inherently ordered and carried very differently"." Again, we agree on this point. The most straightforward strategy to keep homogeneity would be Strategy "kwargs argument", opening to a ``**kwargs`` argument on ``__getitem__``. One of the authors (Stefano Borini) thinks that only the "strict dictionary" strategy is worth of implementation. It is non-ambiguous, simple, does not force complex parsing, and addresses the problem of referring to axes either by position or by name. The "options" use case is probably best handled with a different approach, and may be irrelevant for this PEP. The alternative "named tuple" is another valid choice. Having .get() become obsolete for indexing with default fallback ---------------------------------------------------------------- Introducing a "default" keyword could make ``dict.get()`` obsolete, which would be replaced by ``d["key", default=3]``. Chris Angelico however states: "Currently, you need to write ``__getitem__`` (which raises an exception on finding a problem) plus something else, e.g. ``get()``, which returns a default instead. By your proposal, both branches would go inside ``__getitem__``, which means they could share code; but there still need to be two branches." Additionally, Chris continues: "There'll be an ad-hoc and fairly arbitrary puddle of names (some will go ``default=``, others will say that's way too long and go ``def=``, except that that's a keyword so they'll use ``dflt=`` or something...), unless there's a strong force pushing people to one consistent name.". This argument is valid but it's equally valid for any function call, and is generally fixed by established convention and documentation. On degeneracy of notation ------------------------- User Drekin commented: "The case of ``a[Z=3]`` and ``a[{"Z": 3}]`` is similar to current ``a[1, 2]`` and ``a[(1, 2)]``. Even though one may argue that the parentheses are actually not part of tuple notation but are just needed because of syntax, it may look as degeneracy of notation when compared to function call: ``f(1, 2)`` is not the same thing as ``f((1, 2))``.". References ========== .. [#keyword-1] "keyword-only args in __getitem__" (http://article.gmane.org/gmane.comp.python.ideas/27584) .. [#keyword-2] "Accepting keyword arguments for __getitem__" (https://mail.python.org/pipermail/python-ideas/2014-June/028164.html) .. [#keyword-3] "PEP pre-draft: Support for indexing with keyword arguments" https://mail.python.org/pipermail/python-ideas/2014-July/028250.html .. [#namedtuple] "namedtuple is not as good as it should be" (https://mail.python.org/pipermail/python-ideas/2013-June/021257.html) Copyright ========= This document has been placed in the public domain. .. Local Variables: mode: indented-text indent-tabs-mode: nil sentence-end-double-space: t fill-column: 70 End: