PEP: 346 Title: User Defined ("``with``") Statements Version: $Revision$ Last-Modified: $Date$ Author: Nick Coghlan Status: Withdrawn Type: Standards Track Content-Type: text/x-rst Created: 06-May-2005 Python-Version: 2.5 Post-History: Abstract ======== This PEP is a combination of :pep:`310`'s "Reliable Acquisition/Release Pairs" with the "Anonymous Block Statements" of Guido's :pep:`340`. This PEP aims to take the good parts of :pep:`340`, blend them with parts of :pep:`310` and rearrange the lot into an elegant whole. It borrows from various other PEPs in order to paint a complete picture, and is intended to stand on its own. Author's Note ============= During the discussion of :pep:`340`, I maintained drafts of this PEP as PEP 3XX on my own website (since I didn't have CVS access to update a submitted PEP fast enough to track the activity on python-dev). Since the first draft of this PEP, Guido wrote :pep:`343` as a simplified version of :pep:`340`. :pep:`343` (at the time of writing) uses the exact same semantics for the new statements as this PEP, but uses a slightly different mechanism to allow generators to be used to write statement templates. However, Guido has indicated that he intends to accept a new PEP being written by Raymond Hettinger that will integrate :pep:`288` and :pep:`325`, and will permit a generator decorator like the one described in this PEP to be used to write statement templates for PEP 343. The other difference was the choice of keyword ('with' versus 'do') and Guido has stated he will organise a vote on that in the context of :pep:`343`. Accordingly, the version of this PEP submitted for archiving on python.org is to be WITHDRAWN immediately after submission. :pep:`343` and the combined generator enhancement PEP will cover the important ideas. Introduction ============ This PEP proposes that Python's ability to reliably manage resources be enhanced by the introduction of a new ``with`` statement that allows factoring out of arbitrary ``try``/``finally`` and some ``try``/``except``/``else`` boilerplate. The new construct is called a 'user defined statement', and the associated class definitions are called 'statement templates'. The above is the main point of the PEP. However, if that was all it said, then :pep:`310` would be sufficient and this PEP would be essentially redundant. Instead, this PEP recommends additional enhancements that make it natural to write these statement templates using appropriately decorated generators. A side effect of those enhancements is that it becomes important to appropriately deal with the management of resources inside generators. This is quite similar to :pep:`343`, but the exceptions that occur are re-raised inside the generators frame, and the issue of generator finalisation needs to be addressed as a result. The template generator decorator suggested by this PEP also creates reusable templates, rather than the single use templates of :pep:`340`. In comparison to :pep:`340`, this PEP eliminates the ability to suppress exceptions, and makes the user defined statement a non-looping construct. The other main difference is the use of a decorator to turn generators into statement templates, and the incorporation of ideas for addressing iterator finalisation. If all that seems like an ambitious operation. . . well, Guido was the one to set the bar that high when he wrote :pep:`340` :) Relationship with other PEPs ============================ This PEP competes directly with :pep:`310`, :pep:`340` and :pep:`343`, as those PEPs all describe alternative mechanisms for handling deterministic resource management. It does not compete with :pep:`342` which splits off :pep:`340`'s enhancements related to passing data into iterators. The associated changes to the ``for`` loop semantics would be combined with the iterator finalisation changes suggested in this PEP. User defined statements would not be affected. Neither does this PEP compete with the generator enhancements described in :pep:`288`. While this PEP proposes the ability to inject exceptions into generator frames, it is an internal implementation detail, and does not require making that ability publicly available to Python code. :pep:`288` is, in part, about making that implementation detail easily accessible. This PEP would, however, make the generator resource release support described in :pep:`325` redundant - iterators which require finalisation should provide an appropriate implementation of the statement template protocol. User defined statements ======================= To steal the motivating example from :pep:`310`, correct handling of a synchronisation lock currently looks like this:: the_lock.acquire() try: # Code here executes with the lock held finally: the_lock.release() Like :pep:`310`, this PEP proposes that such code be able to be written as:: with the_lock: # Code here executes with the lock held These user defined statements are primarily designed to allow easy factoring of ``try`` blocks that are not easily converted to functions. This is most commonly the case when the exception handling pattern is consistent, but the body of the ``try`` block changes. With a user-defined statement, it is straightforward to factor out the exception handling into a statement template, with the body of the ``try`` clause provided inline in the user code. The term 'user defined statement' reflects the fact that the meaning of a ``with`` statement is governed primarily by the statement template used, and programmers are free to create their own statement templates, just as they are free to create their own iterators for use in ``for`` loops. Usage syntax for user defined statements ---------------------------------------- The proposed syntax is simple:: with EXPR1 [as VAR1]: BLOCK1 Semantics for user defined statements ------------------------------------- :: the_stmt = EXPR1 stmt_enter = getattr(the_stmt, "__enter__", None) stmt_exit = getattr(the_stmt, "__exit__", None) if stmt_enter is None or stmt_exit is None: raise TypeError("Statement template required") VAR1 = stmt_enter() # Omit 'VAR1 =' if no 'as' clause exc = (None, None, None) try: try: BLOCK1 except: exc = sys.exc_info() raise finally: stmt_exit(*exc) Other than ``VAR1``, none of the local variables shown above will be visible to user code. Like the iteration variable in a ``for`` loop, ``VAR1`` is visible in both ``BLOCK1`` and code following the user defined statement. Note that the statement template can only react to exceptions, it cannot suppress them. See `Rejected Options`_ for an explanation as to why. Statement template protocol: ``__enter__`` ------------------------------------------ The ``__enter__()`` method takes no arguments, and if it raises an exception, ``BLOCK1`` is never executed. If this happens, the ``__exit__()`` method is not called. The value returned by this method is assigned to VAR1 if the ``as`` clause is used. Object's with no other value to return should generally return ``self`` rather than ``None`` to permit in-place creation in the ``with`` statement. Statement templates should use this method to set up the conditions that are to exist during execution of the statement (e.g. acquisition of a synchronisation lock). Statement templates which are not always usable (e.g. closed file objects) should raise a ``RuntimeError`` if an attempt is made to call ``__enter__()`` when the template is not in a valid state. Statement template protocol: ``__exit__`` ----------------------------------------- The ``__exit__()`` method accepts three arguments which correspond to the three "arguments" to the ``raise`` statement: type, value, and traceback. All arguments are always supplied, and will be set to ``None`` if no exception occurred. This method will be called exactly once by the ``with`` statement machinery if the ``__enter__()`` method completes successfully. Statement templates perform their exception handling in this method. If the first argument is ``None``, it indicates non-exceptional completion of ``BLOCK1`` - execution either reached the end of block, or early completion was forced using a ``return``, ``break`` or ``continue`` statement. Otherwise, the three arguments reflect the exception that terminated ``BLOCK1``. Any exceptions raised by the ``__exit__()`` method are propagated to the scope containing the ``with`` statement. If the user code in ``BLOCK1`` also raised an exception, that exception would be lost, and replaced by the one raised by the ``__exit__()`` method. Factoring out arbitrary exception handling ------------------------------------------ Consider the following exception handling arrangement:: SETUP_BLOCK try: try: TRY_BLOCK except exc_type1, exc: EXCEPT_BLOCK1 except exc_type2, exc: EXCEPT_BLOCK2 except: EXCEPT_BLOCK3 else: ELSE_BLOCK finally: FINALLY_BLOCK It can be roughly translated to a statement template as follows:: class my_template(object): def __init__(self, *args): # Any required arguments (e.g. a file name) # get stored in member variables # The various BLOCK's will need updating to reflect # that. def __enter__(self): SETUP_BLOCK def __exit__(self, exc_type, value, traceback): try: try: if exc_type is not None: raise exc_type, value, traceback except exc_type1, exc: EXCEPT_BLOCK1 except exc_type2, exc: EXCEPT_BLOCK2 except: EXCEPT_BLOCK3 else: ELSE_BLOCK finally: FINALLY_BLOCK Which can then be used as:: with my_template(*args): TRY_BLOCK However, there are two important semantic differences between this code and the original ``try`` statement. Firstly, in the original ``try`` statement, if a ``break``, ``return`` or ``continue`` statement is encountered in ``TRY_BLOCK``, only ``FINALLY_BLOCK`` will be executed as the statement completes. With the statement template, ``ELSE_BLOCK`` will also execute, as these statements are treated like any other non-exceptional block termination. For use cases where it matters, this is likely to be a good thing (see ``transaction`` in the Examples_), as this hole where neither the ``except`` nor the ``else`` clause gets executed is easy to forget when writing exception handlers. Secondly, the statement template will not suppress any exceptions. If, for example, the original code suppressed the ``exc_type1`` and ``exc_type2`` exceptions, then this would still need to be done inline in the user code:: try: with my_template(*args): TRY_BLOCK except (exc_type1, exc_type2): pass However, even in these cases where the suppression of exceptions needs to be made explicit, the amount of boilerplate repeated at the calling site is significantly reduced (See `Rejected Options`_ for further discussion of this behaviour). In general, not all of the clauses will be needed. For resource handling (like files or synchronisation locks), it is possible to simply execute the code that would have been part of ``FINALLY_BLOCK`` in the ``__exit__()`` method. This can be seen in the following implementation that makes synchronisation locks into statement templates as mentioned at the beginning of this section:: # New methods of synchronisation lock objects def __enter__(self): self.acquire() return self def __exit__(self, *exc_info): self.release() Generators ========== With their ability to suspend execution, and return control to the calling frame, generators are natural candidates for writing statement templates. Adding user defined statements to the language does *not* require the generator changes described in this section, thus making this PEP an obvious candidate for a phased implementation (``with`` statements in phase 1, generator integration in phase 2). The suggested generator updates allow arbitrary exception handling to be factored out like this:: @statement_template def my_template(*arguments): SETUP_BLOCK try: try: yield except exc_type1, exc: EXCEPT_BLOCK1 except exc_type2, exc: EXCEPT_BLOCK2 except: EXCEPT_BLOCK3 else: ELSE_BLOCK finally: FINALLY_BLOCK Notice that, unlike the class based version, none of the blocks need to be modified, as shared values are local variables of the generator's internal frame, including the arguments passed in by the invoking code. The semantic differences noted earlier (all non-exceptional block termination triggers the ``else`` clause, and the template is unable to suppress exceptions) still apply. Default value for ``yield`` --------------------------- When creating a statement template with a generator, the ``yield`` statement will often be used solely to return control to the body of the user defined statement, rather than to return a useful value. Accordingly, if this PEP is accepted, ``yield``, like ``return``, will supply a default value of ``None`` (i.e. ``yield`` and ``yield None`` will become equivalent statements). This same change is being suggested in :pep:`342`. Obviously, it would only need to be implemented once if both PEPs were accepted :) Template generator decorator: ``statement_template`` ---------------------------------------------------- As with :pep:`343`, a new decorator is suggested that wraps a generator in an object with the appropriate statement template semantics. Unlike :pep:`343`, the templates suggested here are reusable, as the generator is instantiated anew in each call to ``__enter__()``. Additionally, any exceptions that occur in ``BLOCK1`` are re-raised in the generator's internal frame:: class template_generator_wrapper(object): def __init__(self, func, func_args, func_kwds): self.func = func self.args = func_args self.kwds = func_kwds self.gen = None def __enter__(self): if self.gen is not None: raise RuntimeError("Enter called without exit!") self.gen = self.func(*self.args, **self.kwds) try: return self.gen.next() except StopIteration: raise RuntimeError("Generator didn't yield") def __exit__(self, *exc_info): if self.gen is None: raise RuntimeError("Exit called without enter!") try: try: if exc_info[0] is not None: self.gen._inject_exception(*exc_info) else: self.gen.next() except StopIteration: pass else: raise RuntimeError("Generator didn't stop") finally: self.gen = None def statement_template(func): def factory(*args, **kwds): return template_generator_wrapper(func, args, kwds) return factory Template generator wrapper: ``__enter__()`` method -------------------------------------------------- The template generator wrapper has an ``__enter__()`` method that creates a new instance of the contained generator, and then invokes ``next()`` once. It will raise a ``RuntimeError`` if the last generator instance has not been cleaned up, or if the generator terminates instead of yielding a value. Template generator wrapper: ``__exit__()`` method ------------------------------------------------- The template generator wrapper has an ``__exit__()`` method that simply invokes ``next()`` on the generator if no exception is passed in. If an exception is passed in, it is re-raised in the contained generator at the point of the last ``yield`` statement. In either case, the generator wrapper will raise a RuntimeError if the internal frame does not terminate as a result of the operation. The ``__exit__()`` method will always clean up the reference to the used generator instance, permitting ``__enter__()`` to be called again. A ``StopIteration`` raised by the body of the user defined statement may be inadvertently suppressed inside the ``__exit__()`` method, but this is unimportant, as the originally raised exception still propagates correctly. Injecting exceptions into generators ------------------------------------ To implement the ``__exit__()`` method of the template generator wrapper, it is necessary to inject exceptions into the internal frame of the generator. This is new implementation level behaviour that has no current Python equivalent. The injection mechanism (referred to as ``_inject_exception`` in this PEP) raises an exception in the generator's frame with the specified type, value and traceback information. This means that the exception looks like the original if it is allowed to propagate. For the purposes of this PEP, there is no need to make this capability available outside the Python implementation code. Generator finalisation ---------------------- To support resource management in template generators, this PEP will eliminate the restriction on ``yield`` statements inside the ``try`` block of a ``try``/``finally`` statement. Accordingly, generators which require the use of a file or some such object can ensure the object is managed correctly through the use of ``try``/``finally`` or ``with`` statements. This restriction will likely need to be lifted globally - it would be difficult to restrict it so that it was only permitted inside generators used to define statement templates. Accordingly, this PEP includes suggestions designed to ensure generators which are not used as statement templates are still finalised appropriately. Generator finalisation: ``TerminateIteration`` exception -------------------------------------------------------- A new exception is proposed:: class TerminateIteration(Exception): pass The new exception is injected into a generator in order to request finalisation. It should not be suppressed by well-behaved code. Generator finalisation: ``__del__()`` method -------------------------------------------- To ensure a generator is finalised eventually (within the limits of Python's garbage collection), generators will acquire a ``__del__()`` method with the following semantics:: def __del__(self): try: self._inject_exception(TerminateIteration, None, None) except TerminateIteration: pass Deterministic generator finalisation ------------------------------------ There is a simple way to provide deterministic finalisation of generators - give them appropriate ``__enter__()`` and ``__exit__()`` methods:: def __enter__(self): return self def __exit__(self, *exc_info): try: self._inject_exception(TerminateIteration, None, None) except TerminateIteration: pass Then any generator can be finalised promptly by wrapping the relevant ``for`` loop inside a ``with`` statement:: with all_lines(filenames) as lines: for line in lines: print lines (See the Examples_ for the definition of ``all_lines``, and the reason it requires prompt finalisation) Compare the above example to the usage of file objects:: with open(filename) as f: for line in f: print f Generators as user defined statement templates ---------------------------------------------- When used to implement a user defined statement, a generator should yield only once on a given control path. The result of that yield will then be provided as the result of the generator's ``__enter__()`` method. Having a single ``yield`` on each control path ensures that the internal frame will terminate when the generator's ``__exit__()`` method is called. Multiple ``yield`` statements on a single control path will result in a ``RuntimeError`` being raised by the ``__exit__()`` method when the internal frame fails to terminate correctly. Such an error indicates a bug in the statement template. To respond to exceptions, or to clean up resources, it is sufficient to wrap the ``yield`` statement in an appropriately constructed ``try`` statement. If execution resumes after the ``yield`` without an exception, the generator knows that the body of the ``do`` statement completed without incident. Examples ======== 1. A template for ensuring that a lock, acquired at the start of a block, is released when the block is left:: # New methods on synchronisation locks def __enter__(self): self.acquire() return self def __exit__(self, *exc_info): lock.release() Used as follows:: with myLock: # Code here executes with myLock held. The lock is # guaranteed to be released when the block is left (even # if via return or by an uncaught exception). 2. A template for opening a file that ensures the file is closed when the block is left:: # New methods on file objects def __enter__(self): if self.closed: raise RuntimeError, "Cannot reopen closed file handle" return self def __exit__(self, *args): self.close() Used as follows:: with open("/etc/passwd") as f: for line in f: print line.rstrip() 3. A template for committing or rolling back a database transaction:: def transaction(db): try: yield except: db.rollback() else: db.commit() Used as follows:: with transaction(the_db): make_table(the_db) add_data(the_db) # Getting to here automatically triggers a commit # Any exception automatically triggers a rollback 4. It is possible to nest blocks and combine templates:: @statement_template def lock_opening(lock, filename, mode="r"): with lock: with open(filename, mode) as f: yield f Used as follows:: with lock_opening(myLock, "/etc/passwd") as f: for line in f: print line.rstrip() 5. Redirect stdout temporarily:: @statement_template def redirected_stdout(new_stdout): save_stdout = sys.stdout try: sys.stdout = new_stdout yield finally: sys.stdout = save_stdout Used as follows:: with open(filename, "w") as f: with redirected_stdout(f): print "Hello world" 6. A variant on ``open()`` that also returns an error condition:: @statement_template def open_w_error(filename, mode="r"): try: f = open(filename, mode) except IOError, err: yield None, err else: try: yield f, None finally: f.close() Used as follows:: do open_w_error("/etc/passwd", "a") as f, err: if err: print "IOError:", err else: f.write("guido::0:0::/:/bin/sh\n") 7. Find the first file with a specific header:: for name in filenames: with open(name) as f: if f.read(2) == 0xFEB0: break 8. Find the first item you can handle, holding a lock for the entire loop, or just for each iteration:: with lock: for item in items: if handle(item): break for item in items: with lock: if handle(item): break 9. Hold a lock while inside a generator, but release it when returning control to the outer scope:: @statement_template def released(lock): lock.release() try: yield finally: lock.acquire() Used as follows:: with lock: for item in items: with released(lock): yield item 10. Read the lines from a collection of files (e.g. processing multiple configuration sources):: def all_lines(filenames): for name in filenames: with open(name) as f: for line in f: yield line Used as follows:: with all_lines(filenames) as lines: for line in lines: update_config(line) 11. Not all uses need to involve resource management:: @statement_template def tag(*args, **kwds): name = cgi.escape(args[0]) if kwds: kwd_pairs = ["%s=%s" % cgi.escape(key), cgi.escape(value) for key, value in kwds] print '<%s %s>' % name, " ".join(kwd_pairs) else: print '<%s>' % name yield print '' % name Used as follows:: with tag('html'): with tag('head'): with tag('title'): print 'A web page' with tag('body'): for par in pars: with tag('p'): print par with tag('a', href="http://www.python.org"): print "Not a dead parrot!" 12. From :pep:`343`, another useful example would be an operation that blocks signals. The use could be like this:: from signal import blocked_signals with blocked_signals(): # code executed without worrying about signals An optional argument might be a list of signals to be blocked; by default all signals are blocked. The implementation is left as an exercise to the reader. 13. Another use for this feature is for Decimal contexts:: # New methods on decimal Context objects def __enter__(self): if self._old_context is not None: raise RuntimeError("Already suspending other Context") self._old_context = getcontext() setcontext(self) def __exit__(self, *args): setcontext(self._old_context) self._old_context = None Used as follows:: with decimal.Context(precision=28): # Code here executes with the given context # The context always reverts after this statement Open Issues =========== None, as this PEP has been withdrawn. Rejected Options ================ Having the basic construct be a looping construct ------------------------------------------------- The major issue with this idea, as illustrated by :pep:`340`'s ``block`` statements, is that it causes problems with factoring ``try`` statements that are inside loops, and contain ``break`` and ``continue`` statements (as these statements would then apply to the ``block`` construct, instead of the original loop). As a key goal is to be able to factor out arbitrary exception handling (other than suppression) into statement templates, this is a definite problem. There is also an understandability problem, as can be seen in the Examples_. In the example showing acquisition of a lock either for an entire loop, or for each iteration of the loop, if the user defined statement was itself a loop, moving it from outside the ``for`` loop to inside the ``for`` loop would have major semantic implications, beyond those one would expect. Finally, with a looping construct, there are significant problems with TOOWTDI, as it is frequently unclear whether a particular situation should be handled with a conventional ``for`` loop or the new looping construct. With the current PEP, there is no such problem - ``for`` loops continue to be used for iteration, and the new ``do`` statements are used to factor out exception handling. Another issue, specifically with :pep:`340`'s anonymous block statements, is that they make it quite difficult to write statement templates directly (i.e. not using a generator). This problem is addressed by the current proposal, as can be seen by the relative simplicity of the various class based implementations of statement templates in the Examples_. Allowing statement templates to suppress exceptions --------------------------------------------------- Earlier versions of this PEP gave statement templates the ability to suppress exceptions. The BDFL expressed concern over the associated complexity, and I agreed after reading an article by Raymond Chen about the evils of hiding flow control inside macros in C code [1]_. Removing the suppression ability eliminated a whole lot of complexity from both the explanation and implementation of user defined statements, further supporting it as the correct choice. Older versions of the PEP had to jump through some horrible hoops to avoid inadvertently suppressing exceptions in ``__exit__()`` methods - that issue does not exist with the current suggested semantics. There was one example (``auto_retry``) that actually used the ability to suppress exceptions. This use case, while not quite as elegant, has significantly more obvious control flow when written out in full in the user code:: def attempts(num_tries): return reversed(xrange(num_tries)) for retry in attempts(3): try: make_attempt() except IOError: if not retry: raise For what it's worth, the perverse could still write this as:: for attempt in auto_retry(3, IOError): try: with attempt: make_attempt() except FailedAttempt: pass To protect the innocent, the code to actually support that is not included here. Differentiating between non-exceptional exits --------------------------------------------- Earlier versions of this PEP allowed statement templates to distinguish between exiting the block normally, and exiting via a ``return``, ``break`` or ``continue`` statement. The BDFL flirted with a similar idea in :pep:`343` and its associated discussion. This added significant complexity to the description of the semantics, and it required each and every statement template to decide whether or not those statements should be treated like exceptions, or like a normal mechanism for exiting the block. This template-by-template decision process raised great potential for confusion - consider if one database connector provided a transaction template that treated early exits like an exception, whereas a second connector treated them as normal block termination. Accordingly, this PEP now uses the simplest solution - early exits appear identical to normal block termination as far as the statement template is concerned. Not injecting raised exceptions into generators ----------------------------------------------- :pep:`343` suggests simply invoking next() unconditionally on generators used to define statement templates. This means the template generators end up looking rather unintuitive, and the retention of the ban against yielding inside ``try``/``finally`` means that Python's exception handling capabilities cannot be used to deal with management of multiple resources. The alternative which this PEP advocates (injecting raised exceptions into the generator frame), means that multiple resources can be managed elegantly as shown by ``lock_opening`` in the Examples_ Making all generators statement templates ----------------------------------------- Separating the template object from the generator itself makes it possible to have reusable generator templates. That is, the following code will work correctly if this PEP is accepted:: open_it = lock_opening(parrot_lock, "dead_parrot.txt") with open_it as f: # use the file for a while with open_it as f: # use the file again The second benefit is that iterator generators and template generators are very different things - the decorator keeps that distinction clear, and prevents one being used where the other is required. Finally, requiring the decorator allows the native methods of generator objects to be used to implement generator finalisation. Using ``do`` as the keyword --------------------------- ``do`` was an alternative keyword proposed during the :pep:`340` discussion. It reads well with appropriately named functions, but it reads poorly when used with methods, or with objects that provide native statement template support. When ``do`` was first suggested, the BDFL had rejected :pep:`310`'s ``with`` keyword, based on a desire to use it for a Pascal/Delphi style ``with`` statement. Since then, the BDFL has retracted this objection, as he no longer intends to provide such a statement. This change of heart was apparently based on the C# developers reasons for not providing the feature [2]_. Not having a keyword -------------------- This is an interesting option, and can be made to read quite well. However, it's awkward to look up in the documentation for new users, and strikes some as being too magical. Accordingly, this PEP goes with a keyword based suggestion. Enhancing ``try`` statements ---------------------------- This suggestion involves give bare ``try`` statements a signature similar to that proposed for ``with`` statements. I think that trying to write a ``with`` statement as an enhanced ``try`` statement makes as much sense as trying to write a ``for`` loop as an enhanced ``while`` loop. That is, while the semantics of the former can be explained as a particular way of using the latter, the former is not an *instance* of the latter. The additional semantics added around the more fundamental statement result in a new construct, and the two different statements shouldn't be confused. This can be seen by the fact that the 'enhanced' ``try`` statement still needs to be explained in terms of a 'non-enhanced' ``try`` statement. If it's something different, it makes more sense to give it a different name. Having the template protocol directly reflect ``try`` statements ---------------------------------------------------------------- One suggestion was to have separate methods in the protocol to cover different parts of the structure of a generalised ``try`` statement. Using the terms ``try``, ``except``, ``else`` and ``finally``, we would have something like:: class my_template(object): def __init__(self, *args): # Any required arguments (e.g. a file name) # get stored in member variables # The various BLOCK's will need to updated to reflect # that. def __try__(self): SETUP_BLOCK def __except__(self, exc, value, traceback): if isinstance(exc, exc_type1): EXCEPT_BLOCK1 if isinstance(exc, exc_type2): EXCEPT_BLOCK2 else: EXCEPT_BLOCK3 def __else__(self): ELSE_BLOCK def __finally__(self): FINALLY_BLOCK Aside from preferring the addition of two method slots rather than four, I consider it significantly easier to be able to simply reproduce a slightly modified version of the original ``try`` statement code in the ``__exit__()`` method (as shown in `Factoring out arbitrary exception handling`_), rather than have to split the functionality amongst several different methods (or figure out which method to use if not all clauses are used by the template). To make this discussion less theoretical, here is the ``transaction`` example implemented using both the two method and the four method protocols instead of a generator. Both implementations guarantee a commit if a ``break``, ``return`` or ``continue`` statement is encountered (as does the generator-based implementation in the Examples_ section):: class transaction_2method(object): def __init__(self, db): self.db = db def __enter__(self): pass def __exit__(self, exc_type, *exc_details): if exc_type is None: self.db.commit() else: self.db.rollback() class transaction_4method(object): def __init__(self, db): self.db = db self.commit = False def __try__(self): self.commit = True def __except__(self, exc_type, exc_value, traceback): self.db.rollback() self.commit = False def __else__(self): pass def __finally__(self): if self.commit: self.db.commit() self.commit = False There are two more minor points, relating to the specific method names in the suggestion. The name of the ``__try__()`` method is misleading, as ``SETUP_BLOCK`` executes *before* the ``try`` statement is entered, and the name of the ``__else__()`` method is unclear in isolation, as numerous other Python statements include an ``else`` clause. Iterator finalisation (WITHDRAWN) ================================= The ability to use user defined statements inside generators is likely to increase the need for deterministic finalisation of iterators, as resource management is pushed inside the generators, rather than being handled externally as is currently the case. The PEP currently suggests handling this by making all generators statement templates, and using ``with`` statements to handle finalisation. However, earlier versions of this PEP suggested the following, more complex, solution, that allowed the *author* of a generator to flag the need for finalisation, and have ``for`` loops deal with it automatically. It is included here as a long, detailed rejected option. Iterator protocol addition: ``__finish__`` ------------------------------------------ An optional new method for iterators is proposed, called ``__finish__()``. It takes no arguments, and should not return anything. The ``__finish__`` method is expected to clean up all resources the iterator has open. Iterators with a ``__finish__()`` method are called 'finishable iterators' for the remainder of the PEP. Best effort finalisation ------------------------ A finishable iterator should ensure that it provides a ``__del__`` method that also performs finalisation (e.g. by invoking the ``__finish__()`` method). This allows Python to still make a best effort at finalisation in the event that deterministic finalisation is not applied to the iterator. Deterministic finalisation -------------------------- If the iterator used in a ``for`` loop has a ``__finish__()`` method, the enhanced ``for`` loop semantics will guarantee that that method will be executed, regardless of the means of exiting the loop. This is important for iterator generators that utilise `user defined statements`_ or the now permitted ``try``/``finally`` statements, or for new iterators that rely on timely finalisation to release allocated resources (e.g. releasing a thread or database connection back into a pool). ``for`` loop syntax ------------------- No changes are suggested to ``for`` loop syntax. This is just to define the statement parts needed for the description of the semantics:: for VAR1 in EXPR1: BLOCK1 else: BLOCK2 Updated ``for`` loop semantics ------------------------------ When the target iterator does not have a ``__finish__()`` method, a ``for`` loop will execute as follows (i.e. no change from the status quo):: itr = iter(EXPR1) exhausted = False while True: try: VAR1 = itr.next() except StopIteration: exhausted = True break BLOCK1 if exhausted: BLOCK2 When the target iterator has a ``__finish__()`` method, a ``for`` loop will execute as follows:: itr = iter(EXPR1) exhausted = False try: while True: try: VAR1 = itr.next() except StopIteration: exhausted = True break BLOCK1 if exhausted: BLOCK2 finally: itr.__finish__() The implementation will need to take some care to avoid incurring the ``try``/``finally`` overhead when the iterator does not have a ``__finish__()`` method. Generator iterator finalisation: ``__finish__()`` method -------------------------------------------------------- When enabled with the appropriate decorator, generators will have a ``__finish__()`` method that raises ``TerminateIteration`` in the internal frame:: def __finish__(self): try: self._inject_exception(TerminateIteration) except TerminateIteration: pass A decorator (e.g. ``needs_finish()``) is required to enable this feature, so that existing generators (which are not expecting finalisation) continue to work as expected. Partial iteration of finishable iterators ----------------------------------------- Partial iteration of a finishable iterator is possible, although it requires some care to ensure the iterator is still finalised promptly (it was made finishable for a reason!). First, we need a class to enable partial iteration of a finishable iterator by hiding the iterator's ``__finish__()`` method from the ``for`` loop:: class partial_iter(object): def __init__(self, iterable): self.iter = iter(iterable) def __iter__(self): return self def next(self): return self.itr.next() Secondly, an appropriate statement template is needed to ensure the iterator is finished eventually:: @statement_template def finishing(iterable): itr = iter(iterable) itr_finish = getattr(itr, "__finish__", None) if itr_finish is None: yield itr else: try: yield partial_iter(itr) finally: itr_finish() This can then be used as follows:: do finishing(finishable_itr) as itr: for header_item in itr: if end_of_header(header_item): break # process header item for body_item in itr: # process body item Note that none of the above is needed for an iterator that is not finishable - without a ``__finish__()`` method, it will not be promptly finalised by the ``for`` loop, and hence inherently allows partial iteration. Allowing partial iteration of non-finishable iterators as the default behaviour is a key element in keeping this addition to the iterator protocol backwards compatible. Acknowledgements ================ The acknowledgements section for :pep:`340` applies, since this text grew out of the discussion of that PEP, but additional thanks go to Michael Hudson, Paul Moore and Guido van Rossum for writing :pep:`310` and PEP 340 in the first place, and to (in no meaningful order) Fredrik Lundh, Phillip J. Eby, Steven Bethard, Josiah Carlson, Greg Ewing, Tim Delaney and Arnold deVos for prompting particular ideas that made their way into this text. References ========== .. [1] A rant against flow control macros (http://blogs.msdn.com/oldnewthing/archive/2005/01/06/347666.aspx) .. [2] Why doesn't C# have a 'with' statement? (http://msdn.microsoft.com/vcsharp/programming/language/ask/withstatement/) Copyright ========= This document has been placed in the public domain. .. Local Variables: mode: indented-text indent-tabs-mode: nil sentence-end-double-space: t fill-column: 70 End: