PEP: 385 Title: Migrating from svn to Mercurial Version: $Revision$ Last-Modified: $Date$ Author: Dirkjan Ochtman Status: Active Type: Process Content-Type: text/x-rst Created: 25-May-2009 .. warning:: This PEP is in the draft stages. Motivation ========== After having decided to switch to the Mercurial DVCS, the actual migration still has to be performed. In the case of an important piece of infrastructure like the version control system for a large, distributed project like Python, this is a significant effort. This PEP is an attempt to describe the steps that must be taken for further discussion. It's somewhat similar to `PEP 347`_, which discussed the migration to SVN. To make the most of hg, I (Dirkjan) would like to make a high-fidelity conversion, such that (a) as much of the svn metadata as possible is retained, and (b) all metadata is converted to formats that are common in Mercurial. This way, tools written for Mercurial can be optimally used. In order to do this, I want to use the `hgsubversion`_ software to do an initial conversion. This hg extension is focused on providing high-quality conversion from Subversion to Mercurial for use in two-way correspondence, meaning it doesn't throw away as much available metadata as other solutions. Such a conversion also seems like a good time to reconsider the contents of the repository and determine if some things are still valuable. In this spirit, the following sections also propose discarding some of the older metadata. .. _PEP 347: http://www.python.org/dev/peps/pep-0347/ .. _hgsubversion: http://bitbucket.org/durin42/hgsubversion/ Timeline ======== TBD; needs fully working hgsubversion and consensus on this document. Transition plan =============== Branch strategy --------------- Mercurial has two basic ways of using branches: cloned branches, where each branch is kept in a separate repository, and named branches, where each revision keeps metadata to note on which branch it belongs. The former makes it easier to distinguish branches, at the expense of requiring more disk space on the client. The latter makes it a little easier to switch between branches, but often has somewhat unintuitive results for people (though this has been getting better in recent versions of Mercurial). The current proposal is to use named branches for release branches and adopt cloned branches for feature branches, with one exception to this rule: the 3.x branches will be kept in separate clones from the 2.x branches. I think this provides an optimal hybrid approach for Python's uses of branching. Differences between named branches and cloned branches: * Tags in a different (maintenance) clone aren't available in the local clone * Clones with named branches will be larger, since they contain more data (The Mercurial book discourages the use of named branches, but it is, in this respect, somewhat outdated. Named branches have gotten much easier to use since that comment was written, due to improvements in hg.) Converting branches ------------------- There are quite a lot of branches in SVN's branches directory. I propose to clean this up a bit, by following this basic strategy: * Keep all release (maintenance) branches * Discard branches that haven't been touched in 18 months, unless somone indicates there's still interest in such a branch * Keep branches that have been touched in the last 18 months, unless someone indicates the branch can be deprecated There's a `branch map`_ available that shows info about each branch: * keep-clone means we'll keep that branch in a separate clone * keep-named means we'll keep that branch as a named branch in one of the clones * strip means we won't keep that branch * streamed-merge means that it got merged by committing several new revisions to the other branch * merged-r* means the branch got merged in the named revision * merges? means I haven't checked/found out yet whether that branch was ever merged * ? means that your input would be even more helpful than for the other items * some items have no action yet, feel free to treat that as just '?' .. _branch map: http://hg.python.org/pymigr/file/tip/all-branches.txt Converting tags --------------- The SVN tags directory contains a lot of old stuff. Some of these are not, in fact, full tags, but contain only a smaller subset of the repository. I think we should keep all release tags, and consider other tags for inclusion based on requests from the developer community. I'd like to consider unifying the release tag naming scheme to make some things more consistent, if people feel that won't create too many problems. The current proposal is to bring old release tags in line with the current practice of release tag naming. Author map ---------- In order to provide user names the way they are common in hg (in the 'First Last ' format), we need an author map to map cvs and svn user names to real names and their email addresses. I have a complete version of such a map in my `migration tools repository`_. The email addresses in it might be out of date; that's bound to happen, although it would be nice to try and have as many people as possible review it for addresses that are out of date. The current version also still seems to contain some encoding problems. .. _migration tools repository: http://hg.xavamedia.nl/cpython/pymigr/ Generating .hgignore -------------------- The .hgignore file can be used in Mercurial repositories to help ignore files that are not eligible for version control. It does this by employing several possible forms of pattern matching. The current Python repository already includes a rudimentary .hgignore file to help with using the hg mirrors. Since the current Python repository already includes a .hgignore file (for use with hg mirrors), we'll just use that. Generating full history of the file was debated but deemed impractical (because it's relatively hard with fairly little gain, since ignoring is less important for older revisions). Revlog reordering ----------------- As an optional optimization technique, I have performed a reordering pass on the revlogs (internal Mercurial files) resulting from the conversion. In some cases this results in dramatic decreases in on-disk repository size. This especially makes sense for the manifest (where it really helps out quite a lot) and oft-edited files like NEWS.txt (with an admittedly smaller effect). Other repositories ------------------ Richard Tew has indicated that he'd like the Stackless repository to also be converted. What other projects in the svn.python.org repository should be converted? Do we want to convert the peps repository? distutils? others? There's now an initial stab at converting the Jython repository. The current tip of hgsubversion unfortunately fails at some point. Pending investigation. Other repositories that would like to converted to Mercurial can announce themselves to me after the main Python migration is done, and I'll take care of their needs. Infrastructure ============== hg-ssh ------ Developers should access the repositories through ssh, similar to the current setup. Public keys can be used to grant people access to a shared hg@ account. A hgwebdir instance should also be set up for easy browsing and read-only access. If we're using ssh, developers should trivially be able to start new clones (for longer-term features that profit from a separate branch). Hooks ----- A number of hooks is currently in use. The hg equivalents for these should be developed and deployed. The following hooks are being used: * check whitespace: a hook to reject commits in case the whitespace doesn't match the rules for the Python codebase. Should be straightforward to re-implement from the current version. We can also offer a whitespace hook for use with client-side repositories that people can use; it could either warn about whitespace issues and/or truncate trailing whitespace from changed lines. Open issue: do we check only the tip after each push, or do we check every commit in a changegroup? * commit mails: we can leverage the notify extension for this. Emails will include diffs for each changeset committed against the repository. * buildbots: both the regular and the community build masters must be notified. Fortunately buildbot includes support for hg. I've also implemented this for Mercurial itself, so I don't expect problems here. * check contributors: in the current setup, all changesets bear the username of committers, who must have signed the contributor agreement. We might want to use a hook to check if the committer is a contributor if we keep a list of registered contributors. Then, the hook might warn users that push a group of revisions containing changesets from unknown contributors. End-of-line conversions ----------------------- There has been some discussion about the lack of end-of-line conversion support in Mercurial. While Mercurial comes with a win32text extension that provides some basic support for converting end-of-line data on a file-name pattern basis, the lack of exclusion (for specifying broad rules with exceptions) and the use of hgrc files (which can't be versioned) make it less than ideal. I think the primary line of defense for prevention of inappropriate newlines should be hooks on the server side which basically turn down any changegroup or changeset introducing such data. The use of the win32text extension (which can hopefully be improved/extended to support the usage scenarios mentioned above) and/or a commit-time hook could be the first line of defense. hgwebdir -------- A more or less stock hgwebdir installation should be set up. We might want to come up with a style to match the Python website. It may also be useful to build a quick extension to augment the URL rev parser so that it can also take r[0-9]+ args and come up with the matching hg revision. roundup ------- We'll come up with an auto-linking plugin for roundup, which can match a changeset identifier (possibly with a branch prefix), and link it to the appropriate revision in the hgwebdir instance. Second, the script above (in the hgwebdir section) will make sure that old links to revision should continue to work (by pointing to the hg changeset that reflects the svn revision). After migration =============== Where to get code ----------------- It needs to be decided where the hg repositories will live. I'd like to propose to keep the hgwebdir instance at hg.python.org. This is an accepted standard for many organizations, and an easy parallel to svn.python.org. The 2.7 (trunk) repo might live at http://hg.python.org/main/, for example, with py3k at http://hg.python.org/py3k/. For write access, developers will have to use ssh, which could be ssh://hg@hg.python.org/main/. A demo installation will be set up with a preliminary conversion so people can experiment and review; it can live at http://hg.python.org/example/. code.python.org was also proposed as the hostname. Personally, I think that using the VCS name in the hostname is good because it prevents confusion: it should be clear that you can't use svn or bzr for hg.python.org. hgwebdir can already provide tarballs for every changeset. I think this obviates the need for daily snapshots; we can just point users to tip.tar.gz instead, meaning they will get the latest. If desired, we could even use buildbot results to point to the last good changeset. Python-specific documentation ----------------------------- hg comes with good built-in documentation (available through hg help) and a `wiki`_ that's full of useful information and recipes. In addition to that, the `parts of the developer FAQ`_ concerning version control will gain a section on using hg for Python development. Some of the text will be dependent on the outcome of debate about this PEP (for example, the branching strategy). .. _wiki: http://www.selenic.com/mercurial/wiki/ .. _parts of the developer FAQ: http://www.python.org/dev/faq/#version-control Proposed workflow ----------------- I propose two workflows for the migration of patches between several branches. For migration within 2.x or 3.x branches, I propose a patch always gets committed to the oldest branch where it applies first. Then, the resulting changeset can be merged using hg merge to all newer branches within that series (2.x or 3.x). If it does not apply as-is to the newer branch, hg revert can be used to easily revert to the new-branch-native head, patch in some alternative version of the patch (or none, if it's not applicable), then commit the merge. The premise here is that all changesets from an older branch within the series are eventually merged to all newer branches within the series. The upshot is that this provides for the most painless merging procedure. The downside is that in the general case, people have to think about the oldest branch to which the patch should be applied before actually applying it. For migration between 2.x and 3.x branches (which should all be in the same direction, though I'm not sure what direction is most appropriate here), changesets should be transplanted (not merged) in some other way. The transplant extension, import/export and bundle/unbundle work equally well here. Choosing this approach allows 3.x not to carry all of the 2.x history-since-it- was-branched, meaning the clone is not as big and the merges not as complicated. The future of Subversion ------------------------ What happens to the Subversion repositories after the migration? Since the svn server contains a bunch of repositories, not just the CPython one, it will probably live on for a bit as not every project may want to migrate or it takes longer for other projects to migrate. To prevent people from staying behind, we may want to remove migrated projects from the repository. Build identification -------------------- Python currently provides the sys.subversion tuple to allow Python code to find out exactly what version of Python it's running against. The current version looks something like this: * ('CPython', 'tags/r262', '71600') * ('CPython', 'trunk', '73128M') Another value is returned from Py_GetBuildInfo() in the C API, and available to Python code as part of sys.version: * 'r262:71600, Jun 2 2009, 09:58:33' * 'trunk:73128M, Jun 2 2009, 01:24:14' I propose that the revision identifier will be the short version of hg's revision hash, for example 'dd3ebf81af43', augmented with '+' (instead of 'M') if the working directory from which it was built was modified. This mirrors the output of the hg id command, which is intended for this kind of usage. The sys.subversion value will also be renamed to sys.mercurial to reflect the change in VCS. For the tag/branch identifier, I propose that hg will check for tags on the currently checked out revision, use the tag if there is one ('tip' doesn't count), and uses the branch name otherwise. sys.subversion becomes * ('CPython', '2.6.2', 'dd3ebf81af43') * ('CPython', 'default', 'af694c6a888c+') and the build info string becomes * '2.6.2:dd3ebf81af43, Jun 2 2009, 09:58:33' * 'default:af694c6a888c+, Jun 2 2009, 01:24:14' This reflects that the default branch in hg is called 'default' instead of Subversion's 'trunk', and reflects the proposed new tag format.