python-peps/pep-0249.txt

766 lines
30 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

PEP: 249
Title: Python Database API Specification v2.0
Version: $Revision$
Author: db-sig@python.org (Python Database SIG)
Editor: mal@lemburg.com (Marc-Andre Lemburg)
Status: Draft
Type: Informational
Replaces: 248
Introduction
This API has been defined to encourage similarity between the
Python modules that are used to access databases. By doing this,
we hope to achieve a consistency leading to more easily understood
modules, code that is generally more portable across databases,
and a broader reach of database connectivity from Python.
The interface specification consists of several sections:
* Module Interface
* Connection Objects
* Cursor Objects
* DBI Helper Objects
* Type Objects and Constructors
* Implementation Hints
* Major Changes from 1.0 to 2.0
Comments and questions about this specification may be directed
to the SIG for Database Interfacing with Python
(db-sig@python.org).
For more information on database interfacing with Python and
available packages see the Database Topic
Guide at http://www.python.org/topics/database/.
This document describes the Python Database API Specification
2.0. The previous version 1.0 version is still available as
reference, in PEP 248. Package writers are encouraged to use
this version of the specification as basis for new interfaces.
Module Interface
Access to the database is made available through connection
objects. The module must provide the following constructor for
these:
connect(parameters...)
Constructor for creating a connection to the database.
Returns a Connection Object. It takes a number of
parameters which are database dependent. [1]
These module globals must be defined:
apilevel
String constant stating the supported DB API level.
Currently only the strings '1.0' and '2.0' are allowed.
If not given, a DB-API 1.0 level interface should be
assumed.
threadsafety
Integer constant stating the level of thread safety the
interface supports. Possible values are:
0 Threads may not share the module.
1 Threads may share the module, but not connections.
2 Threads may share the module and connections.
3 Threads may share the module, connections and
cursors.
Sharing in the above context means that two threads may
use a resource without wrapping it using a mutex semaphore
to implement resource locking. Note that you cannot always
make external resources thread safe by managing access
using a mutex: the resource may rely on global variables
or other external sources that are beyond your control.
paramstyle
String constant stating the type of parameter marker
formatting expected by the interface. Possible values are
[2]:
'qmark' Question mark style,
e.g. '...WHERE name=?'
'numeric' Numeric, positional style,
e.g. '...WHERE name=:1'
'named' Named style,
e.g. '...WHERE name=:name'
'format' ANSI C printf format codes,
e.g. '...WHERE name=%s'
'pyformat' Python extended format codes,
e.g. '...WHERE name=%(name)s'
The module should make all error information available through
these exceptions or subclasses thereof:
Warning
Exception raised for important warnings like data
truncations while inserting, etc. It must be a subclass of
the Python StandardError (defined in the module
exceptions).
Error
Exception that is the base class of all other error
exceptions. You can use this to catch all errors with one
single 'except' statement. Warnings are not considered
errors and thus should not use this class as base. It must
be a subclass of the Python StandardError (defined in the
module exceptions).
InterfaceError
Exception raised for errors that are related to the
database interface rather than the database itself. It
must be a subclass of Error.
DatabaseError
Exception raised for errors that are related to the
database. It must be a subclass of Error.
DataError
Exception raised for errors that are due to problems with
the processed data like division by zero, numeric value
out of range, etc. It must be a subclass of DatabaseError.
OperationalError
Exception raised for errors that are related to the
database's operation and not necessarily under the control
of the programmer, e.g. an unexpected disconnect occurs,
the data source name is not found, a transaction could not
be processed, a memory allocation error occurred during
processing, etc. It must be a subclass of DatabaseError.
IntegrityError
Exception raised when the relational integrity of the
database is affected, e.g. a foreign key check fails. It
must be a subclass of DatabaseError.
InternalError
Exception raised when the database encounters an internal
error, e.g. the cursor is not valid anymore, the
transaction is out of sync, etc. It must be a subclass of
DatabaseError.
ProgrammingError
Exception raised for programming errors, e.g. table not
found or already exists, syntax error in the SQL
statement, wrong number of parameters specified, etc. It
must be a subclass of DatabaseError.
NotSupportedError
Exception raised in case a method or database API was used
which is not supported by the database, e.g. requesting a
.rollback() on a connection that does not support
transaction or has transactions turned off. It must be a
subclass of DatabaseError.
This is the exception inheritance layout:
StandardError
|__Warning
|__Error
|__InterfaceError
|__DatabaseError
|__DataError
|__OperationalError
|__IntegrityError
|__InternalError
|__ProgrammingError
|__NotSupportedError
Note: The values of these exceptions are not defined. They should
give the user a fairly good idea of what went wrong, though.
Connection Objects
Connection Objects should respond to the following methods:
close()
Close the connection now (rather than whenever __del__ is
called). The connection will be unusable from this point
forward; an Error (or subclass) exception will be raised
if any operation is attempted with the connection. The
same applies to all cursor objects trying to use the
connection. Note that closing a connection without
committing the changes first will cause an implicit
rollback to be performed.
commit()
Commit any pending transaction to the database. Note that
if the database supports an auto-commit feature, this must
be initially off. An interface method may be provided to
turn it back on.
Database modules that do not support transactions should
implement this method with void functionality.
rollback()
This method is optional since not all databases provide
transaction support. [3]
In case a database does provide transactions this method
causes the the database to roll back to the start of any
pending transaction. Closing a connection without
committing the changes first will cause an implicit
rollback to be performed.
cursor()
Return a new Cursor Object using the connection. If the
database does not provide a direct cursor concept, the
module will have to emulate cursors using other means to
the extent needed by this specification. [4]
Cursor Objects
These objects represent a database cursor, which is used to
manage the context of a fetch operation. Cursors created from
the same connection are not isolated, i.e., any changes
done to the database by a cursor are immediately visible by the
other cursors. Cursors created from different connections can
or can not be isolated, depending on how the transaction support
is implemented (see also the connection's rollback() and commit()
methods.)
Cursor Objects should respond to the following methods and
attributes:
description
This read-only attribute is a sequence of 7-item
sequences. Each of these sequences contains information
describing one result column: (name, type_code,
display_size, internal_size, precision, scale,
null_ok). The first two items (name and type_code) are
mandatory, the other five are optional and must be set to
None if meaningfull values are not provided.
This attribute will be None for operations that
do not return rows or if the cursor has not had an
operation invoked via the executeXXX() method yet.
The type_code can be interpreted by comparing it to the
Type Objects specified in the section below.
rowcount
This read-only attribute specifies the number of rows that
the last executeXXX() produced (for DQL statements like
'select') or affected (for DML statements like 'update' or
'insert').
The attribute is -1 in case no executeXXX() has been
performed on the cursor or the rowcount of the last
operation is not determinable by the interface. [7]
callproc(procname[,parameters])
(This method is optional since not all databases provide
stored procedures. [3])
Call a stored database procedure with the given name. The
sequence of parameters must contain one entry for each
argument that the procedure expects. The result of the
call is returned as modified copy of the input
sequence. Input parameters are left untouched, output and
input/output parameters replaced with possibly new values.
The procedure may also provide a result set as
output. This must then be made available through the
standard fetchXXX() methods.
close()
Close the cursor now (rather than whenever __del__ is
called). The cursor will be unusable from this point
forward; an Error (or subclass) exception will be raised
if any operation is attempted with the cursor.
execute(operation[,parameters])
Prepare and execute a database operation (query or
command). Parameters may be provided as sequence or
mapping and will be bound to variables in the operation.
Variables are specified in a database-specific notation
(see the module's paramstyle attribute for details). [5]
A reference to the operation will be retained by the
cursor. If the same operation object is passed in again,
then the cursor can optimize its behavior. This is most
effective for algorithms where the same operation is used,
but different parameters are bound to it (many times).
For maximum efficiency when reusing an operation, it is
best to use the setinputsizes() method to specify the
parameter types and sizes ahead of time. It is legal for
a parameter to not match the predefined information; the
implementation should compensate, possibly with a loss of
efficiency.
The parameters may also be specified as list of tuples to
e.g. insert multiple rows in a single operation, but this
kind of usage is depreciated: executemany() should be used
instead.
Return values are not defined.
executemany(operation,seq_of_parameters)
Prepare a database operation (query or command) and then
execute it against all parameter sequences or mappings
found in the sequence seq_of_parameters.
Modules are free to implement this method using multiple
calls to the execute() method or by using array operations
to have the database process the sequence as a whole in
one call.
The same comments as for execute() also apply accordingly
to this method.
Return values are not defined.
fetchone()
Fetch the next row of a query result set, returning a
single sequence, or None when no more data is
available. [6]
An Error (or subclass) exception is raised if the previous
call to executeXXX() did not produce any result set or no
call was issued yet.
fetchmany([size=cursor.arraysize])
Fetch the next set of rows of a query result, returning a
sequence of sequences (e.g. a list of tuples). An empty
sequence is returned when no more rows are available.
The number of rows to fetch per call is specified by the
parameter. If it is not given, the cursor's arraysize
determines the number of rows to be fetched. The method
should try to fetch as many rows as indicated by the size
parameter. If this is not possible due to the specified
number of rows not being available, fewer rows may be
returned.
An Error (or subclass) exception is raised if the previous
call to executeXXX() did not produce any result set or no
call was issued yet.
Note there are performance considerations involved with
the size parameter. For optimal performance, it is
usually best to use the arraysize attribute. If the size
parameter is used, then it is best for it to retain the
same value from one fetchmany() call to the next.
fetchall()
Fetch all (remaining) rows of a query result, returning
them as a sequence of sequences (e.g. a list of tuples).
Note that the cursor's arraysize attribute can affect the
performance of this operation.
An Error (or subclass) exception is raised if the previous
call to executeXXX() did not produce any result set or no
call was issued yet.
nextset()
(This method is optional since not all databases support
multiple result sets. [3])
This method will make the cursor skip to the next
available set, discarding any remaining rows from the
current set.
If there are no more sets, the method returns
None. Otherwise, it returns a true value and subsequent
calls to the fetch methods will return rows from the next
result set.
An Error (or subclass) exception is raised if the previous
call to executeXXX() did not produce any result set or no
call was issued yet.
arraysize
This read/write attribute specifies the number of rows to
fetch at a time with fetchmany(). It defaults to 1 meaning
to fetch a single row at a time.
Implementations must observe this value with respect to
the fetchmany() method, but are free to interact with the
database a single row at a time. It may also be used in
the implementation of executemany().
setinputsizes(sizes)
This can be used before a call to executeXXX() to
predefine memory areas for the operation's parameters.
sizes is specified as a sequence -- one item for each
input parameter. The item should be a Type Object that
corresponds to the input that will be used, or it should
be an integer specifying the maximum length of a string
parameter. If the item is None, then no predefined memory
area will be reserved for that column (this is useful to
avoid predefined areas for large inputs).
This method would be used before the executeXXX() method
is invoked.
Implementations are free to have this method do nothing
and users are free to not use it.
setoutputsize(size[,column])
Set a column buffer size for fetches of large columns
(e.g. LONGs, BLOBs, etc.). The column is specified as an
index into the result sequence. Not specifying the column
will set the default size for all large columns in the
cursor.
This method would be used before the executeXXX() method
is invoked.
Implementations are free to have this method do nothing
and users are free to not use it.
Type Objects and Constructors
Many databases need to have the input in a particular format for
binding to an operation's input parameters. For example, if an
input is destined for a DATE column, then it must be bound to the
database in a particular string format. Similar problems exist
for "Row ID" columns or large binary items (e.g. blobs or RAW
columns). This presents problems for Python since the parameters
to the executeXXX() method are untyped. When the database module
sees a Python string object, it doesn't know if it should be bound
as a simple CHAR column, as a raw BINARY item, or as a DATE.
To overcome this problem, a module must provide the constructors
defined below to create objects that can hold special values.
When passed to the cursor methods, the module can then detect the
proper type of the input parameter and bind it accordingly.
A Cursor Object's description attribute returns information about
each of the result columns of a query. The type_code must compare
equal to one of Type Objects defined below. Type Objects may be
equal to more than one type code (e.g. DATETIME could be equal to
the type codes for date, time and timestamp columns; see the
Implementation Hints below for details).
The module exports the following constructors and singletons:
Date(year,month,day)
This function constructs an object holding a date value.
Time(hour,minute,second)
This function constructs an object holding a time value.
Timestamp(year,month,day,hour,minute,second)
This function constructs an object holding a time stamp
value.
DateFromTicks(ticks)
This function constructs an object holding a date value
from the given ticks value (number of seconds since the
epoch; see the documentation of the standard Python time
module for details).
TimeFromTicks(ticks)
This function constructs an object holding a time value
from the given ticks value (number of seconds since the
epoch; see the documentation of the standard Python time
module for details).
TimestampFromTicks(ticks)
This function constructs an object holding a time stamp
value from the given ticks value (number of seconds since
the epoch; see the documentation of the standard Python
time module for details).
Binary(string)
This function constructs an object capable of holding a
binary (long) string value.
STRING
This type object is used to describe columns in a database
that are string-based (e.g. CHAR).
BINARY
This type object is used to describe (long) binary columns
in a database (e.g. LONG, RAW, BLOBs).
NUMBER
This type object is used to describe numeric columns in a
database.
DATETIME
This type object is used to describe date/time columns in
a database.
ROWID
This type object is used to describe the "Row ID" column
in a database.
SQL NULL values are represented by the Python None singleton on
input and output.
Note: Usage of Unix ticks for database interfacing can cause
troubles because of the limited date range they cover.
Implementation Hints
* The preferred object types for the date/time objects are those
defined in the mxDateTime package. It provides all necessary
constructors and methods both at Python and C level.
* The preferred object type for Binary objects are the
buffer types available in standard Python starting with
version 1.5.2. Please see the Python documentation for
details. For information about the the C interface have a
look at Include/bufferobject.h and
Objects/bufferobject.c in the Python source
distribution.
* Here is a sample implementation of the Unix ticks based
constructors for date/time delegating work to the generic
constructors:
import time
def DateFromTicks(ticks):
return apply(Date,time.localtime(ticks)[:3])
def TimeFromTicks(ticks):
return apply(Time,time.localtime(ticks)[3:6])
def TimestampFromTicks(ticks):
return apply(Timestamp,time.localtime(ticks)[:6])
* This Python class allows implementing the above type
objects even though the description type code field yields
multiple values for on type object:
class DBAPITypeObject:
def __init__(self,*values):
self.values = values
def __cmp__(self,other):
if other in self.values:
return 0
if other < self.values:
return 1
else:
return -1
The resulting type object compares equal to all values
passed to the constructor.
* Here is a snippet of Python code that implements the exception
hierarchy defined above:
import exceptions
class Error(exceptions.StandardError):
pass
class Warning(exceptions.StandardError):
pass
class InterfaceError(Error):
pass
class DatabaseError(Error):
pass
class InternalError(DatabaseError):
pass
class OperationalError(DatabaseError):
pass
class ProgrammingError(DatabaseError):
pass
class IntegrityError(DatabaseError):
pass
class DataError(DatabaseError):
pass
class NotSupportedError(DatabaseError):
pass
In C you can use the PyErr_NewException(fullname,
base, NULL) API to create the exception objects.
Major Changes from Version 1.0 to Version 2.0
The Python Database API 2.0 introduces a few major changes
compared to the 1.0 version. Because some of these changes will
cause existing DB API 1.0 based scripts to break, the major
version number was adjusted to reflect this change.
These are the most important changes from 1.0 to 2.0:
* The need for a separate dbi module was dropped and the
functionality merged into the module interface itself.
* New constructors and Type Objects were added for date/time
values, the RAW Type Object was renamed to BINARY. The
resulting set should cover all basic data types commonly
found in modern SQL databases.
* New constants (apilevel, threadlevel, paramstyle) and
methods (executemany, nextset) were added to provide better
database bindings.
* The semantics of .callproc() needed to call stored
procedures are now clearly defined.
* The definition of the .execute() return value changed.
Previously, the return value was based on the SQL statement
type (which was hard to implement right) -- it is undefined
now; use the more flexible .rowcount attribute
instead. Modules are free to return the old style return
values, but these are no longer mandated by the
specification and should be considered database interface
dependent.
* Class based exceptions were incorporated into the
specification. Module implementors are free to extend the
exception layout defined in this specification by
subclassing the defined exception classes.
Open Issues
Although the version 2.0 specification clarifies a lot of
questions that were left open in the 1.0 version, there are still
some remaining issues:
* Define a useful return value for .nextset() for the case where
a new result set is available.
* Create a fixed point numeric type for use as loss-less
monetary and decimal interchange format.
Footnotes
[1] As a guideline the connection constructor parameters should be
implemented as keyword parameters for more intuitive use and
follow this order of parameters:
dsn Data source name as string
user User name as string (optional)
password Password as string (optional)
host Hostname (optional)
database Database name (optional)
E.g. a connect could look like this:
connect(dsn='myhost:MYDB',user='guido',password='234$')
[2] Module implementors should prefer 'numeric', 'named' or
'pyformat' over the other formats because these offer more
clarity and flexibility.
[3] If the database does not support the functionality required
by the method, the interface should throw an exception in
case the method is used.
The preferred approach is to not implement the method and
thus have Python generate an AttributeError in
case the method is requested. This allows the programmer to
check for database capabilities using the standard
hasattr() function.
For some dynamically configured interfaces it may not be
appropriate to require dynamically making the method
available. These interfaces should then raise a
NotSupportedError to indicate the non-ability
to perform the roll back when the method is invoked.
[4] a database interface may choose to support named cursors by
allowing a string argument to the method. This feature is
not part of the specification, since it complicates
semantics of the .fetchXXX() methods.
[5] The module will use the __getitem__ method of the parameters
object to map either positions (integers) or names (strings)
to parameter values. This allows for both sequences and
mappings to be used as input.
The term "bound" refers to the process of binding an input
value to a database execution buffer. In practical terms,
this means that the input value is directly used as a value
in the operation. The client should not be required to
"escape" the value so that it can be used -- the value
should be equal to the actual database value.
[6] Note that the interface may implement row fetching using
arrays and other optimizations. It is not
guaranteed that a call to this method will only move the
associated cursor forward by one row.
[7] The rowcount attribute may be coded in a way that updates
its value dynamically. This can be useful for databases that
return usable rowcount values only after the first call to
a .fetchXXX() method.
Acknowledgements
Many thanks go to Andrew Kuchling who converted the Python
Database API Specification 2.0 from the original HTML format into
the PEP format.
Copyright
This document has been placed in the Public Domain.
Local Variables:
mode: indented-text
indent-tabs-mode: nil
End: