python-peps/peps/pep-0275.rst

359 lines
11 KiB
ReStructuredText

PEP: 275
Title: Switching on Multiple Values
Author: Marc-André Lemburg <mal@lemburg.com>
Status: Rejected
Type: Standards Track
Content-Type: text/x-rst
Created: 10-Nov-2001
Python-Version: 2.6
Post-History:
Rejection Notice
================
A similar PEP for Python 3000, :pep:`3103`, was already rejected,
so this proposal has no chance of being accepted either.
Abstract
========
This PEP proposes strategies to enhance Python's performance
with respect to handling switching on a single variable having
one of multiple possible values.
Problem
=======
Up to Python 2.5, the typical way of writing multi-value switches
has been to use long switch constructs of the following type::
if x == 'first state':
...
elif x == 'second state':
...
elif x == 'third state':
...
elif x == 'fourth state':
...
else:
# default handling
...
This works fine for short switch constructs, since the overhead of
repeated loading of a local (the variable x in this case) and
comparing it to some constant is low (it has a complexity of O(n)
on average). However, when using such a construct to write a state
machine such as is needed for writing parsers the number of
possible states can easily reach 10 or more cases.
The current solution to this problem lies in using a dispatch
table to find the case implementing method to execute depending on
the value of the switch variable (this can be tuned to have a
complexity of O(1) on average, e.g. by using perfect hash
tables). This works well for state machines which require complex
and lengthy processing in the different case methods. It does not
perform well for ones which only process one or two instructions
per case, e.g.
::
def handle_data(self, data):
self.stack.append(data)
A nice example of this is the state machine implemented in
pickle.py which is used to serialize Python objects. Other
prominent cases include XML SAX parsers and Internet protocol
handlers.
Proposed Solutions
==================
This PEP proposes two different but not necessarily conflicting
solutions:
1. Adding an optimization to the Python compiler and VM
which detects the above if-elif-else construct and
generates special opcodes for it which use a read-only
dictionary for storing jump offsets.
2. Adding new syntax to Python which mimics the C style
switch statement.
The first solution has the benefit of not relying on adding new
keywords to the language, while the second looks cleaner. Both
involve some run-time overhead to assure that the switching
variable is immutable and hashable.
Both solutions use a dictionary lookup to find the right
jump location, so they both share the same problem space in
terms of requiring that both the switch variable and the
constants need to be compatible to the dictionary implementation
(hashable, comparable, a==b => hash(a)==hash(b)).
Solution 1: Optimizing if-elif-else
-----------------------------------
Implementation:
It should be possible for the compiler to detect an
if-elif-else construct which has the following signature::
if x == 'first':...
elif x == 'second':...
else:...
i.e. the left hand side always references the same variable,
the right hand side a hashable immutable builtin type. The
right hand sides need not be all of the same type, but they
should be comparable to the type of the left hand switch
variable.
The compiler could then setup a read-only (perfect) hash
table, store it in the constants and add an opcode SWITCH in
front of the standard if-elif-else byte code stream which
triggers the following run-time behaviour:
At runtime, SWITCH would check x for being one of the
well-known immutable types (strings, unicode, numbers) and
use the hash table for finding the right opcode snippet. If
this condition is not met, the interpreter should revert to
the standard if-elif-else processing by simply skipping the
SWITCH opcode and proceeding with the usual if-elif-else byte
code stream.
Issues:
The new optimization should not change the current Python
semantics (by reducing the number of ``__cmp__`` calls and adding
``__hash__`` calls in if-elif-else constructs which are affected
by the optimization). To assure this, switching can only
safely be implemented either if a "from __future__" style
flag is used, or the switching variable is one of the builtin
immutable types: int, float, string, unicode, etc. (not
subtypes, since it's not clear whether these are still
immutable or not)
To prevent post-modifications of the jump-table dictionary
(which could be used to reach protected code), the jump-table
will have to be a read-only type (e.g. a read-only
dictionary).
The optimization should only be used for if-elif-else
constructs which have a minimum number of n cases (where n is
a number which has yet to be defined depending on performance
tests).
Solution 2: Adding a switch statement to Python
-----------------------------------------------
New Syntax
''''''''''
::
switch EXPR:
case CONSTANT:
SUITE
case CONSTANT:
SUITE
...
else:
SUITE
(modulo indentation variations)
The "else" part is optional. If no else part is given and
none of the defined cases matches, no action is taken and
the switch statement is ignored. This is in line with the
current if-behaviour. A user who wants to signal this
situation using an exception can define an else-branch
which then implements the intended action.
Note that the constants need not be all of the same type, but
they should be comparable to the type of the switch variable.
Implementation
''''''''''''''
The compiler would have to compile this into byte code
similar to this::
def whatis(x):
switch(x):
case 'one':
print '1'
case 'two':
print '2'
case 'three':
print '3'
else:
print "D'oh!"
into (omitting POP_TOP's and SET_LINENO's)::
6 LOAD_FAST 0 (x)
9 LOAD_CONST 1 (switch-table-1)
12 SWITCH 26 (to 38)
14 LOAD_CONST 2 ('1')
17 PRINT_ITEM
18 PRINT_NEWLINE
19 JUMP 43
22 LOAD_CONST 3 ('2')
25 PRINT_ITEM
26 PRINT_NEWLINE
27 JUMP 43
30 LOAD_CONST 4 ('3')
33 PRINT_ITEM
34 PRINT_NEWLINE
35 JUMP 43
38 LOAD_CONST 5 ("D'oh!")
41 PRINT_ITEM
42 PRINT_NEWLINE
>>43 LOAD_CONST 0 (None)
46 RETURN_VALUE
Where the 'SWITCH' opcode would jump to 14, 22, 30 or 38
depending on 'x'.
Thomas Wouters has written a patch which demonstrates the
above. You can download it from [1]_.
Issues
''''''
The switch statement should not implement fall-through
behaviour (as does the switch statement in C). Each case
defines a complete and independent suite; much like in an
if-elif-else statement. This also enables using break in
switch statements inside loops.
If the interpreter finds that the switch variable x is
not hashable, it should raise a TypeError at run-time
pointing out the problem.
There have been other proposals for the syntax which reuse
existing keywords and avoid adding two new ones ("switch" and
"case"). Others have argued that the keywords should use new
terms to avoid confusion with the C keywords of the same name
but slightly different semantics (e.g. fall-through without
break). Some of the proposed variants::
case EXPR:
of CONSTANT:
SUITE
of CONSTANT:
SUITE
else:
SUITE
case EXPR:
if CONSTANT:
SUITE
if CONSTANT:
SUITE
else:
SUITE
when EXPR:
in CONSTANT_TUPLE:
SUITE
in CONSTANT_TUPLE:
SUITE
...
else:
SUITE
The switch statement could be extended to allow multiple
values for one section (e.g. case 'a', 'b', 'c': ...). Another
proposed extension would allow ranges of values (e.g. case
10..14: ...). These should probably be post-poned, but already
kept in mind when designing and implementing a first version.
Examples
--------
The following examples all use a new syntax as proposed by
solution 2. However, all of these examples would work with
solution 1 as well.
::
switch EXPR: switch x:
case CONSTANT: case "first":
SUITE print x
case CONSTANT: case "second":
SUITE x = x**2
... print x
else: else:
SUITE print "whoops!"
case EXPR: case x:
of CONSTANT: of "first":
SUITE print x
of CONSTANT: of "second":
SUITE print x**2
else: else:
SUITE print "whoops!"
case EXPR: case state:
if CONSTANT: if "first":
SUITE state = "second"
if CONSTANT: if "second":
SUITE state = "third"
else: else:
SUITE state = "first"
when EXPR: when state:
in CONSTANT_TUPLE: in ("first", "second"):
SUITE print state
in CONSTANT_TUPLE: state = next_state(state)
SUITE in ("seventh",):
... print "done"
else: break # out of loop!
SUITE else:
print "middle state"
state = next_state(state)
Here's another nice application found by Jack Jansen (switching
on argument types)::
switch type(x).__name__:
case 'int':
SUITE
case 'string':
SUITE
Scope
=====
XXX Explain "from __future__ import switch"
Credits
=======
* Martin von Löwis (issues with the optimization idea)
* Thomas Wouters (switch statement + byte code compiler example)
* Skip Montanaro (dispatching ideas, examples)
* Donald Beaudry (switch syntax)
* Greg Ewing (switch syntax)
* Jack Jansen (type switching examples)
References
==========
.. [1] https://sourceforge.net/tracker/index.php?func=detail&aid=481118&group_id=5470&atid=305470
Copyright
=========
This document has been placed in the public domain.