- it is now possible to disable the TimedBuffer
- this is increasing the default on libaio maxAIO to 4k
- The Auto Tuning on the journal will use asynchronous writes to simulate what would happen on faster disks
- If you set datasync=false on the CLI, the system will suggest mapped and disable the buffer timeout
This closes#1436
This commit superseeds #1436 since it's now disabling the timed buffer through the CLI
Allows for JMS selectors on JMSCorrelationID as well as JMSXGroupID
and JMSXUserID along with some fixes to avoid an NPE case and fixes
to the conversion of AMQP MessageID and CorrelationID values when
doing cross protocol mappings. Adds new tests to cover more cases
of using the JMS selector with Qpid JMS and the AMQP test client.
If message senders and receivers uses different
wireformat.tightEncodingEnabled options, broker will get marshalling
problem. This is because when openwire messages are converted to
core messages, and later these core messages converted to openwire
messages, the broker uses a mashaller that comes with the connection
used to carry the messages.
For example, if a producer sents a message using option "wireformat
.tightEncodingEnabled=false" and a receiver tries to receive it
using 'true' for the same option, it'll never get it because the
broker will fail to use a "tight encoding" marshaller to
decode a 'loose encoded' message.
To fix the problem, we always use 'tight encoding' for internal
message converters.
Currently this test can take over 30seconds just itself. It seems we can safely reduce the number of messages to validate perf improvement greatly reducing test time.
By default, every openwire connection will create a queue
under the multicast address ActiveMQ.Advisory.TempQueue.
If a openwire client is create temporary queues these queues
will fill up with messages for as long as the associated
openwire connection is alive. It appears these messages
do not get consumed from the queues.
The reason behind is that advisory messages don't require
acknowledgement so the messages stay at the queue.
Added integration test, to prove issue, and assert fix.
Fix PersistentQueueBindingEncoding to return value, not false.
Fix some method arg name to align with class interface arg name
Added test case for cross protocol on JMSDeliveryMode proving issue, and asserting fix
Added fix to AmqpCoreConverter to ensure durability (JMSDeliveryMode) is retained.
Similar issue spotted with JMSPriority as with JMSDeliveyMode, fixing at the same time.
Added extra test case for jmspriority
Added fix for jmspriority
Add support to update Queue config via reload using existing updateQueue method at runtime.
Add/extend unit test cases to include testing reload of queue config.
Instead of wait to flush an executor,
I have added a method isFlushed() which will just translate to the
state on the OrderedExecutor.
In the case another executor is provided (for tests) there's a delegate
into normal executors.
delegate to the jdk saslServer. Allow acceptor configuration of supported mechanismis; saslMechanisms=<a,b>
and allow login config scope for krb5 to be configured via saslLoginConfigScope=x
When calling a consumer to receive message with a timeout
(receive(long timeout), if the consumer's buffer is empty, it sends
a 'forced delivery' the waiting forever, expecting the server to
send back a 'forced delivery" message if the queue is empty.
If the connection is disconnected as the arrived 'forced
delivery' message is corrupted, this 'forced delivery' message
never gets to consumer. After the session is reconnected,
the consumer never knows that and stays waiting.
To fix that we can send a 'forced delivery' to server right
after the session is reconnected.
The test is broken. It can be fixed by doing
```java
FakeTransportConnector(URI uri) {
setServer(new TransportServer {
@Override
public URI getConnectURI() {
return uri;
}
but then the test would fail because message
eviction is not supported by Artemis.
This change results in many more tests being run. Previously, 662 tests
were executed. Now, 1166 tests is executed. The running time has increased
from ~20 minutes to ~50 minutes.
This is replacing an executor on ServerSessionPacketHandler
by a this actor.
This is to avoid creating a new runnable per packet received.
Instead of creating new Runnable, this will use a single static runnable
and the packet will be send by a message, which will be treated by a listener.
Look at ServerSessionPacketHandler on this commit for more information on how it works.
Add krb5sslloginmodule that will populate userPrincipal that can be mapped to roles independently
Generalised callback handlers to take a connection and pull certs or peerprincipal based on
callback. This bubbled up into api change in securitystore and security manager
If replication blocked anything on the journal
the processing from clients would be blocked
and nothing would work.
As part of this fix I am using an executor on ServerSessionPacketHandler
which will also scale better as the reader from Netty would be feed immediately.
Core client with netty connector and acceptor doing kerberos
jaas.doAs around sslengine init such that the SSL handshake can do kerberos ticket
generaton and validation.
The kerberos authenticated user is then validated with the security manager before
being populated into the message userId.
The feature is enabled with the kerb5Config property. When lowercase it is the
principal. With a leading uppercase char it is the login.config entry to use.
The MAPPED journal refactoring include:
- simplified lifecycle and logic (eg fixed file size with single mmap memory region)
- supports for the TimedBuffer to coalesce msyncs (via Decorator pattern)
- TLAB pooling of direct ByteBuffer like the NIO journal
- remove of old benchmarks and benchmark dependencies
When a large message is replicated to backup, a pendingID is generated
when the large message is finished. This pendingID is generated by a
BatchingIDGenerator at backup.
It is possible that a pendingID generated at backup may be a duplicate
to an ID generated at live server.
This can cause a problem when a large message with a messageID that is
the same as another largemessage's pendingID is replicated and stored
in the backup's journal, and then a deleteRecord for the pendingID
is appended. If backup becomes live and loads the journal, it will
drop the large message add record because there is a deleteRecord of
the same ID (even though it is a pendingID of another message).
As a result the expecting client will never get this large message.
So in summary, the root cause is that the pendingIDs for large
messages are generated at backup while backup is not alive.
The solution to this is that instead of the backup generating
the pendingID, we make them all be generated in advance
at live server and let them replicated to backup whereever needed.
The ID generater at backup only works when backup becomes live
(when it is properly initialized from journal).
This method name would clash with ServiceComponent
As the real meaning here on this method is just to failover
So I've renamed the method to avoid the clash with my next commit
(I've done this on a separate commit as you may need to redo this
commit from scratch again in other branches instead of lots of clashes on cherry-pick)
When a large message is being diverted, a new copy of the original
message is created and replicated (if there is a backup) to the backup.
In LargeServerMessageImpl.copy(long) it reuse a byte array to copy
message body. It is possible that one block of date is read into
the byte array before the previous read has been replicated,
causing the replicated bytes to corrupt.
If we make a copy of the byte array before replication, the corruption
of data will be avoided.
Before sending of messages to server 0 begins, the test
should wait until consumer is registered at RemoteQueueBindingImpl
on server 0. Otherwise some messages may not be rebalanced
to server 1.
it doesn't really matter the number of files.. as long as the data is valid.
This type of assertion limits the implementation. it's mocking test with too much intrusion
over the implementation. Hence I'm removing these clauses that will fail eventually.
Add extra configuration to address-settings to be able to
control / enable address/queue deletion by pattern,
rather than a global toggle.
Add support in the reload logic to remove address
and/or queues if the address matches an address setting,
where it is enabled.
When a broken packet arrives at client side it causes decoding error.
Currently artemis doesn't handle it properly. It should catch such
errors and disconnect the underlying connection, logging a proper
warning message
Use AcitveMQDestination for subscription naming, fixing and aligning queue naming in the process.
The change is behind a configuration toggle so to avoid causing any breaking changes for uses not expecting.
In a cluster if a node is shut down (or crashed) when a
message is being routed to a remote binding, a internal
property may be added to the message and persisted. The
name of the property is like _AMQ_ROUTE_TOsf.my-cluster*.
if the node starts back, it will load and reroute this message
and if it goes to a local consumer, this property won't
get removed and goes to the client.
The fix is to remove this internal property before it
is sent to any client.
Update ActiveMQConnection to change/alighn behaviour for addtional methods:
- getMetaData
- stop
Adding test to avoid regression.
This is aligning with qpid-jms and openwire clients
Adds headers AMQ_SCHEDULED_DELAY and AMQ_SCHEDULED_TIME to STOMP
protocol handling to allow for delayed and scheduled time of a
message. The AMQ_SCHEDULED_DELAY brings forward the same option
from the 5.x broker and the AMQ_SCHEDULED_TIME option adds a fixed
time of delivery alternative to match that of AMQP and others.
Add test case, to prove the issue, and then obviously ensure it works, post fix.
Apply changes in logic of createQueueName to handle global better and fix the behaviour.
Create queues so names are same as behaviour with core client.
Add topic and queue cache maps in Session.
Add configuration to use cache or not with defaulting to false, which keeps existing behaviour as the default.
Need to configure the WS Handshaker in the test client's netty transport
with the same value given to the proton connection via setMaxFrameSize
so that incoming frames larger than the default 65535 over WS don't
trigger netty to fail the connection.
Building on ARTEMIS-905 JCtools ConcurrentMap replacement first proposed but currently parked by @franz1981, replace the collections with primitive key concurrent collections to avoid auto boxing.
The goal of this is to reduce/remove autoboxing on the hot path.
We are just adding jctools to the broker (should not be in client dependencies)
Like wise targeting specific use case with specific implementation rather than a blanket replace all.
Using collections from Bookkeeper, reduces outside tlab allocation, on resizing compared to JCTools, which occurs frequently on testing.
Port fixes to the AMQP test client recently made in the 5.x version.
Fixes some thread safety issues in the Transport. Ensures more
timely shutdown of the Connection executor. Uses a dynamic Proxy
to generate Read-Only Proton wrappers instead of the hand crafted
versions. Adds additional logging for test data
- NIO/ASYNCIO new TimedBuffer with adapting batch window heuristic
- NIO/ASYNCIO improved TimedBuffer write monitoring with
lightweight concurrent performance counters
- NIO/ASYNCIO journal/paging operations benefit from less buffer copy
- NIO/ASYNCIO any buffer copy is always performed with raw batch copy
using SIMD instrinsics (System::arrayCopy) or memcpy under the hood
- NIO improved clear buffers using SIMD instrinsics (Arrays::fill) and/or memset
- NIO journal operation perform by default TLABs allocation pooling (off heap)
retaining only the last max sized buffer
- NIO improved file copy operations using zero-copy FileChannel::transfertTo
- NIO improved zeroing using pooled single OS page buffer to clean the file
+ pwrite (on Linux)
- NIO deterministic release of unpooled direct buffers to avoid OOM errors
due to slow GC
- Exposed OS PAGE SIZE value using Env class
move classes and methods to their correct location to avoid cyclic dependencies between packages and classes.
ARTEMIS-904 Remove cyclic dependencies from artemis-cli
move classes and methods to their correct location to avoid cyclic dependencies between packages and classes.
ARTEMIS-904 Remove cyclic dependencies from artemis-cli
move classes and methods to their correct location to avoid cyclic dependencies between packages and classes.
Added a wait-for-activation option to shared-store master HA policies.
This option is enabled by default to ensure unchanged server startup behavior.
If this option is enabled, ActiveMQServer.start() with a shared-store master server will not return
before the server has been activated.
If this options is disabled, start() will return after a background activation thread has been started.
The caller can use waitForActivation() to wait until server is activated, or just check the current activation status.
Adds a test that validates that messages that are either lacking a
header or are set to be non-durable are not persisted and are not
recovered on broker restart.
Adding a new ActievMQServerPlugin interface to support adding custom
behavior to the broker at certain events such as connection or session
creation.
https://issues.apache.org/jira/browse/ARTEMIS-898
When creating some AMQP resources (senders, receivers, etc) the broker
can return an error of 'failed' instead of the security error that is
expected in these cases. In the case of a receiver being created and
a security error happening the broker fails to send back a response
causing the client to hang waiting for an attach response.
Refactor the AMQP test suite grouping tests into more logical unit
tests and adding additional coverage in many areas. Adds some negative
validation tests to cover features that were only partially tested.
Brings in tests from ActiveMQ 5.x that were not yet ported to Artemis
to increase coverage amd test scenarios previously seen to have issues
in the 5.x broker.
Improve tests that were failing sporadically due to not waiting for
broker stats to be updated after async calls were made.
Instead of going directly into backup mode within the shared-store
live activation, we just change the HA-policy to slave and return
to the caller - ActiveMQServerImpl.internalStart().
The caller will then handle the backup activation as usual
in a separate thread, such that EmbeddedJMS.start() can return.
Also added a related integration test.
sendMessage() may throw ActiveMQException that causes CNFE
at the management client. Also it should check if headers
in the message is null (to prevent NPE).
Broker should support full qualified queue names (FQQN)
as well as bare queue names. This means when clients access
to a queue they have two equivalent ways to do so. One way
is by queue names and the other is by FQQN (i.e. address::qname)
names. Currently only receiving is supported.
On link attach we currently default out SenderSettleMode to MIXED which
while legal doesn't truly reflect what the client asked for. We instead
now update the link to reflect the mode requested by the client
Also add some tests to ensure that we always return the
ReceiverSettleMode as FIRST since we don't support SECOND.
Adds some new AMQP protocol handling tests brought forward from
ActiveMQ 5.x as well as cleaning up some of th existing tests
code to make adding some other tests easier.
This is fixing an issue introduced on 4b47461f03 (ARTEMIS-822)
The Transactions were being looked up without the readLock and some of the controls for Read and Write lock
were broken after this.
removing JmsTopicWildcardSendReceiveTest::testReceiveWildcardTopicMatchDoubleWildcard
Accordingly to bisect, this test was broken at 21b64b3e4f
and it contradicts the commit done at 21b64b3e4f
So, this is being removed
AIOFileLockManager doesn't work on NFS-mounted share store directories.
Since the GFS2 bug https://bugzilla.redhat.com/show_bug.cgi?id=678585
has been fixed end of 2011, the class AIOFileLockManager is no longer needed and I have removed it.
Broker should support full qualified queue names (FQQN)
as well as bare queue names. This means when clients access
to a queue they have two equivalent ways to do so. One way
is by queue names and the other is by FQQN (i.e. address::qname)
names. Currently only receiving is supported.
Add tests for this management operation with both core and AMQP encoded
messages. Also fix a few problems with the implementation like not
checking the passed-in headers for null and not counting messages
properly.
Fix the getUserID and getTimestamp methods in AMQPMessage to read and
return the correct values. Adds some tests to cover these cases and
cleans up some others.
Ensure that the header value for priority is read and returned in a form
that is scaled such that it won't cause an IndexOutOfBoundsException
from the QueueImpl priority array. Adds some additional testing for
message priority support.
This is moving the smoke tests creates as part of the relication tests.
They are also now based on junit tests.
And to support starting servers I am exposing basedir to unit tests in general.
When populate-validated-user = true AMQP messages can cause exceptions.
This feature isn't particularly applicable to AMQP so this commit
eliminates the exception and leaves the AMQP messages untouched
even if populate-validated-user = true. In other words,
populate-validated-user + AMQP is not supported.
Clebert Suconic
Martyn Taylor
Robert Godfrey
Timothy Bish
Jeff Mesnil
Justin Bertram
Michael Andre Pearce
Jens Reimann
Jiri Danek
Pat Fox
Robbie Gemmell
Howard Gao
Francesco Nigro
gtully
Stanislav Knot
Andy Taylor
Christopher L. Shannon (cshannon)
Erich Duda
xstefank
Odyldzhon Toshbekov
Guillaume Nodet
Michal Tóth
Ingo Weiss
Ville Skyttä
Ulf Lilleengen
Bennet Schulz
Bernd Gutjahr
Zoran Regvart