Attempt to standardize all Logger declaration to a singular variable name
which makes the code more consistent and make finding usages of loggers in
the code a bit easier.
Commit 5a42de5fa6 called my attention to
this test. It really needs to be refactored because:
- It belongs in the integration-tests module rather than the MQTT
protocol module.
- It is using a lot of non-standard components (e.g.
EmbeddedJMSResource, Awaitility, etc.).
- It is overly complicated (e.g. using its own MqttClientService).
This commit resolves all those problems. The new implementation is quite
a bit different but still equivalent. I reverted the original fix from
ARTEMIS-2476 and the test still fails.
Logger statements should use formatting syntax and let the normal framework checks take care of
checking if a logger is enabled instead of string concats and isXEnabled logger checks except
in cases there is known expense to the specifc logging message/arg preparation or passing.
Changes from myself and Robbie Gemmell.
Co-authored-by: Robbie Gemmell <robbie@apache.org>
If an AMQP consumer tries to receive a message and the broker is unable
to convert the message from core to AMQP then the consumer is
disconnected and the offending message stays in the queue. When the
consumer reconnects the conversion error will happen again resulting in
a loop that can only be resolved through administrative action (e.g.
deleting the message manually or sending it to a dead letter address).
This commit fixes that problem by detecting the conversion problem and
sending the message to the queue's dead letter address. It also doesn't
disconnect the consumer.
This commit also changes the log messages associated with sending a
message to the dead letter address since this event can now occur
regardless of the delivery attempts.
Sometimes users want to perform custom client ID validation, and in the
case of an invalid client ID the proper reason code should be returned
in the CONNACK packet.
Due to the changes in 682f505e32 we now
send "Last Will & Testament" MQTT messages via ServerSession. This means
sending will fail if the disk is full. For MQTT this triggers a
connection failure which in turns triggers sending an LWT message. This
process will recurse infinitely until it results in a
java.lang.StackOverflowError.
This commit fixes that by tracking whether or not sending a LWT message
is already in progress.
org.apache.activemq.artemis.spi.core.protocol.RemotingConnection has a
number of implementations most notably an abstract version which
provides many methods shared among the implementations. The sharing
could be improved to eliminate duplicate code.
This commit eliminates more than 700 lines of unnecessary code.
There should be no semantic changes.
Using direct routing skips authorization for "Last Will and Testament"
messages (a.k.a. "will" messages). This commit fixes that problem by
using the internal session that is established for normal message
production and consumption.
The OpenWire JMS client shipped with ActiveMQ "Classic" uses the
client's hostname as part of the `JMSMessageID`. Consumers may use this
data to select messages sent from particular hosts. Although this is
brittle and not recommended it is nonetheless possible.
However, when messages arrive to ActiveMQ Artemis they are converted
to core messages, and the broker doesn't properly map the selector from
`JMSMessageID` to the corresponding property on the underlying core
message. This commit fixes that problem. Changes include:
- Mapping selector from JMSMessageID to the internal __HDR_MESSAGE_ID
- Relocating some constant values so that both the protocol and commons
module can use them
- Adding a test
MQTT 3.1 and 3.1.1 clients using a clean session should have a
*non-durable* subscription queue. If the broker restarts the queue
should be removed. This is due to [MQTT-3.1.2-6] which states that the
session (and any state) must last only as long as the network
connection.
It would be useful for security manager implementations to be able to
alter the client ID of MQTT connections.
This commit supports this functionality by moving the code which handles
the client ID *ahead* of the authentication code. There it sets the
client ID on the connection and thereafter any component (e.g. security
managers) which needs to inspect or modify it can do so on the
connection.
This commit also refactors the MQTT connection class to extend the
abstract connection class. This greatly simplifies the MQTT connection
class and will make it easier to maintain in the future.
Allow replication only certain addresses with mirror controller.
The configuration is similar to cluster address configuration.
Co-authored-by: Robbie Gemmell <robbie@apache.org>
The MQTT 5 (and 3.1.1) specification states:
Until it has received the corresponding PUBREL packet, the receiver
MUST acknowledge any subsequent PUBLISH packet with the same Packet
Identifier by sending a PUBREC. It MUST NOT cause duplicate messages to
be delivered to any onward recipients in this case [MQTT-4.3.3-10].
The broker prevents a duplicate message, but it doesn't respond with a
PUBREC. This commit fixes that.
Removing the connection ID property from the actual *message* breaks the
nolocal functionality. Removing the property isn't necessary in the
first place so this commit reomves that code.
Older versions of Openwire clients wil be affected by AMQ-6431.
As a result of the issue if the ID of the message>Integer.MAX_VALUE
a consumer configured with Failover and doing duplicate detection on the client
will not be able to process duplicate detection accordingly and miss messages.
This bug is causing tests in o.a.a.a.t.i.m.s.c.ConnectTestsWithSecurity
to fail.
This commit fixes the problem by setting the session's version earlier
in the logic handling the CONNECT packet so that the proper CONNACK
return code can be supplied to the remote client in case of
authentication failure.
The commit includes the following changes:
- Don't drop the connection on subscribe or publish authorization
failures for 3.1 clients.
- Don't drop the connection on subscribe authorization failures for
3.1.1 clients.
- Add configuration parameter to control behavior on publish
authorization failures for 3.1.1 clients (either disconnect or not).
Avoid storing the following values as byte[] for OpenWire:
- Marshalled properties. We already store the unmarshalled properties
so this is altogether redundant.
- Producer ID.
- Message ID.
- Various destination values.
Also, eliminate the "original transaction ID" conversion code as it's
never actually set from the incoming message.
MQTT 5 is an OASIS standard which debuted in March 2019. It boasts
numerous improvments over its predecessor (i.e. MQTT 3.1.1) which will
benefit users. These improvements are summarized in the specification
at:
https://docs.oasis-open.org/mqtt/mqtt/v5.0/os/mqtt-v5.0-os.html#_Toc3901293
The specification describes all the behavior necessary for a client or
server to conform. The spec is highlighted with special "normative"
conformance statements which distill the descriptions into concise
terms. The specification provides a helpful summary of all these
statements. See:
https://docs.oasis-open.org/mqtt/mqtt/v5.0/os/mqtt-v5.0-os.html#_Toc3901292
This commit implements all of the mandatory elements from the
specification and provides tests which are identified using the
corresponding normative conformance statement. All normative
conformance statements either have an explicit test or are noted in
comments with an explanation of why an explicit test doesn't exist. See
org.apache.activemq.artemis.tests.integration.mqtt5 for all those
details.
This commit also includes documentation about how to configure
everything related to the new MQTT 5 features.
- Avoid blowing up on string bodies of any size if the valueSizeLimit bits are configured to disable limit
- Dont NPE if amqp-value + binary body is sent without a content-type, as it always should be.
- Include expected prefix when adding delivery delay and ingress time annotations.
- Use the actual name for ingress time annotation, as with all other annotations.
- Use correct object type when testing equality with content-type value.
- Use consistent case for 'groupId' in different properties.
The test I wrote for ARTEMIS-3513 is throwing a few convert exceptions
because of SimpleString versus String conversion
This commit is addressing the issue,
The previous commit (the one addressing ARTEMIS-3513) should provide the test for this change.
While converting a core message to an OpenWire message there may be an
error processing a property value. Currently this results in an
exception and the message is not dispatched to the client. The broker
eventually attempts to redeliver this message resulting in the same
error. Instead of throwing an exception the broker should simply log a
WARN message and skip the property. This will allow clients to receive
the message without the problematic property and the broker will not
have to attempt to redeliver the message again.
As a follow-up to #3618/dc7de893747b90b627d729f9f18a758bb4dad9d5 update
checkstyle to the latest version, restoring the originally intended
"RightCurly" style, and updating all the code to properly adhere to the
style as enforced by the new checkstyle version.
The version of checkstyle we used before the aforementioned commit had
a bug which didn't properly enforced our intended "RightCurly" style
(see https://github.com/checkstyle/checkstyle/issues/6345). That commit
changed the style to accommodate the handful of unintended style
violations. This commit reverts that change for 2 main reasons:
- The style was always intended to use `alone` for both `METHOD_DEF`
and `CTOR_DEF`.
- There are over 1,000 existing uses of the intended style and around
30 violations of this style which were unintentionally allowed.
Reverting the style back to the original and cleaning up the unintented
violations makes the code more consistent and prevents further style
inconsistencies in the future.
There were a handful of other changes related to checkstyle bugs which
allowed unintended style violations. These were related to indentation
levels.
This closes#3619
(with some minor changes from Robbie to fix remaining violations)
Logging the exception here is potentially confusing for two main
reasons:
1. It's not clear the exception is specifically for the client.
2. There is likely other logging that identifies the problem.
- Remove duplicates dependency definition following e7e3c71511.
- Removes deprecated RELEASE version use, consolidate modules on single paho client version.
- Remove prerequisites entry as per warning, suggested enforcer rule already in place.
Change summary:
- Remove the existing Xalan-based XPath evaluator since Xalan appears
to be no longer maintained.
- Implement a JAXP XPath evaluator (from the ActiveMQ 5.x code-base).
- Pull in the changes from https://issues.apache.org/jira/browse/AMQ-5333
to enable configurable XML parser features.
- Add a method to the base Message interface to make it easier to get
the message body as a string. This relieves the filter from having
to deal with message implementation details.
- Update the Qpid JMS client to get the jms.validateSelector parameter.
Initialize the JMS expiration with the value calculated during the scan
of the AMQP message to avoid a different value for each conversion based
on System.currentTimeMillis() and ttl.
* removing the JMS dependency on AMQP module
* fixing destinations usage.
* refactoring to remove some JMS usage and make exceptions a bit better
Jira: https://issues.apache.org/jira/browse/ARTEMIS-3113
This adds the opportunity to register new SASL schemes via the default
java service-loader mechanism.
Implementors have to provide an implementation of the ServerSASLFactory
that is responsible for providing instances of the actual scheme.
Justin Bertram
Robbie Gemmell
Clebert Suconic
AntonRoskvist
Timothy Bish
Domenico Francesco Bruscino
iliya
Erwin Dondorp
Marco Roehrs
nbrendah
gtully
franz1981
Asukwo-comfort
Emmanuel Hugonnet
Andy Taylor
Christoph Läubrich