Add tests for this management operation with both core and AMQP encoded
messages. Also fix a few problems with the implementation like not
checking the passed-in headers for null and not counting messages
properly.
Fix the getUserID and getTimestamp methods in AMQPMessage to read and
return the correct values. Adds some tests to cover these cases and
cleans up some others.
Ensure that the header value for priority is read and returned in a form
that is scaled such that it won't cause an IndexOutOfBoundsException
from the QueueImpl priority array. Adds some additional testing for
message priority support.
When populate-validated-user = true AMQP messages can cause exceptions.
This feature isn't particularly applicable to AMQP so this commit
eliminates the exception and leaves the AMQP messages untouched
even if populate-validated-user = true. In other words,
populate-validated-user + AMQP is not supported.
If broker fails to decode any packets from buffer, it should
treat it as a critical bug and disconnect immediately.
Currently broker only logs an error message.
When I added flow control, some tests that were using reflection started to fail.
Also as a precaution I'm using <= on the flow control low credit check
Update the AMQP test client to allow for better inspection of the
delivery updates that happen during normal use. Use those modification
to check that when the broker's sender accepts and settles a non-settled
disposition it adds a proper TransactionState disposition with the
correct outcome and txn-id in that state.
When a message is sent to the broker with a TransactionState indicating
that the message should be included in a transaction the disposition from
the broker indicating acceptance of the message should be done using a
TransactionState value that contained the TX ID and the Accepted
disposition.
The coordinator needs to refill credit on the receiver once it has been
exhausted, otherwise the remote cannot send additional declare or
discharge commands to the broker.
Adjust slow-consumer detection logic to use the number of messages in
the queue and not just the number of messages added since the last
check. This means the getRate() method now returns the rate of messages
which it *could* have dispatched since the last check rather than the
rate at which it received messages. This is a more reliable metric to
ensure the slow-consumer detection logic doesn't flag a consumer as
slow unfairly. Although the reliability will come at a performance cost
since getMessageCount() must lock the queue.
As part of my refactoring on AMQP, the broker shouldn't rely on Application properties
for any broker semantic changes on delivery.
I am removing any access to those now, so we can properly deal with this post 2.0.0.
with this we could send and receive message in their raw format,
without requiring conversions to Core.
- MessageImpl and ServerMessage are removed as part of this
- AMQPMessage and CoreMessage will have the specialized message format for each protocol
- The protocol manager is now responsible to send the message
- The message will provide an encoder for journal and paging
When openwire sends back an exception response, it doesn't set
the correct correlation id. This causes the client to miss the
response and the exception won't get caught.
To fix it we need to add the correlation id before sending.
When sending an empty ObjectMessage, broker doesn't
write a 'length' field to the message buffer. In delivery
the broker tries to read the length from the buffer, which
causes "IndexOutOfBoundsException".
To fix it, we need to check if the buffer is empty or not,
and only read it if the buffer is not empty.
When a producer sends a messages to a temp destination created from
another connection, it fails. The reason behind it is that the
producer's connection didn't receive the advisory message (notification)
from broker about this temp destination, and it will throw an exception
if it doesn't know this temp destination.
The fix is send the advisory to the client so that it knows this destination.
When creating a 'no-local' openwire consumer, it doesn't work,
meaning it can still receive messages from the same connection.
The fix is similar to what Artemis client does, which is adding
a 'filter' to the consumer/subscription.
The difference is that with OpenWire we have to do it on the
broker side.
Adds tests for handling of Rejected, Released and Modified outcomes for
a delivery sent to a receiver. Tests show that for the Modified outcome
the broker is redelivering the message to the same receiver when the
undeliverable here value is set which violates the AMQP 1.0 specified
handling of that field. Also for Rejected outcome the broker should
be sending the rejected message to the DLQ as Rejected is supposed to
be a terminal outcome.
Small fix included to not adjust the delivery count if the Modified
outcome does not indicate that the delivery failed.
If the SASL plain mechanism arrives with the authzid value set the
mechanism needs to account for its presence and use the correct fields
of the exchange to get the username and password values. Adds some
tests to validate this fix.
Tests for the management of temporary destinations using the dynamic
node feature. Failing case, the broker return a source or target that
indicates it will honor the lifetime policy of delete on close but the
temporary destination remains in existence after the link it closed.
Some new tests that cover some AMQP credit handling scenarios. Test
case 'testCloseBusyReceiver' currently fails due to being dispatched a
duplicate message.
The broker needs to return only the filters that are supported on a
receiver attach otherwise the remote is not aware that the broker is not
able to honor the requested configuration of the receiver.
Two new tests that acquire messages inside a TX and manage their
settlement and retirement in differing ways, one test works the other
'testReceiversCommitAndRollbackWithMultipleSessionsInSingleTXNoSettlement'
fails due to messages that were committed being redelivered to the
client unexpectedly.
Refactor the AMQP Message transformers both for better performance and
also to fix a number of issues with the transformers creating inbound
and outbound messages with incorrectly mapped values or extra data
appended where it should not be.
Since we don't need client implementations any longer, given the maturity level of
qpid jms, these classes can go, as a result a lot of the interfaces can be removed.
As part of this I am removing proton-plug, and reorganizing the packages in a way I think it
makes more sense and easier to other developers to understand and maintain it.
https://issues.apache.org/jira/browse/ARTEMIS-751
* add DataSource property to DatabaseStorageConfiguration to be able to
communicate with the data store using this DataSource instance instead
of relying on the creation the SQL connnection using the JDBC connection
URL/driver class name tuple.
* add SQLProvider.Factory property to DatabaseStorageConfiguration to
externalize the choice of the SQLProvider instead of relying on
hard-coded choices. If the property is null, the current behaviour will
be used (determing the SQLProvider based on the driver class name)
* bindingsJournal and messageJournal are already started in the start()
method. Remove redundant calls that were creating unused JDBC
connections that are never closed.
JIRA: https://issues.apache.org/jira/browse/ARTEMIS-714
max-disk-usage = how much of a disk we can use before the system blocks
global-max-size = how much bytes we can take from memory for messages before we start enter into the configured page mode
This will also change the default created configuration into page-mode as that's more reliable for systems.
QueueQuery was previously used instead of checking for bindings on a
particular address name. This meant sending and receiving only worked
for those queues that happened to have the same queueName to address.
This patch replaces this with binding check.
There's also some minor ProtonTest fixes included.
Javax.json is a newer JSR, but has an ASF compliant version, is pretty close to the original JSON.org API and will support a standard annotation based JSON-B solution at some point soon.
Updated integration tests and removed JSON.org from license.
I changed the message for TTL timeouts because the existing message was
a bit verbose and a bit speculative. Also, now that the broker supports
more protocols the bit about connection-ttl and
client-failure-check-period is less relevant.
user.dir points to current working directory from which the maven command
was invoked. If the command is not invoked from project root directory,
the generated paths are wrong what causes failures of some tests.
Duplicated dependency declarations on a few pom.xml files were causing the Maven warnings. These duplicated dependencies were removed.
File `server-start-stop-backup-jms-config1.xml` was malformed. A missing quotation mark was added.
The server will always restart now, with older files being removed.
The system will now move current data into ./oldreplica.#, and remove old ones.
All the logic for moving these files is encapsulated at FileMoveManager.
Based on log it is clear that the connection was closed by Finalizer before the failure
was caused by the test itself. Since the connection variable is not referenced in the
code anymore, JVM concludes it can destroy the object. Especially IBM JDK does it very
fast.
The sender abstraction must be able to update its sender address in the
case of dynamic senders whose target address is not set until the code
initializes the link and creates a destination for it.
Implements a new feature for the broker whereby it may automatically create and
delete JMS topics which are not explicitly defined through the management API
or file-based configuration. A JMS topic is created in response to a sent
message or connected subscriber. The topic may subsequently be deleted when it
no longer has any subscribers. Auto-creation and auto-deletion can both be
turned on/off via address-setting.
The previous fix was breaking compatibility with older servers.
We need to check the default address if an exception happened during the send (due to flow control or blocker)
ActiveMQConnection implements FailoverEventListener which executes client's
FailoverEventListeners in separated threads in background. The old implementation
does not guarantee ordering of their executions. The commit improves the
implementation to guarantee it.
https://issues.apache.org/jira/browse/ARTEMIS-524
I am keeping all the debug ad tracing I added during the debug of this issue,
for that reason this commit may look longer than expected
The fix will be highlited by the tests added on org.apache.activemq.artemis.tests.integration.client.PagingTest
1. Changed public fields in ActiveMQClient to private and added getters.
Exposing fields for thread pool sized allow to modify them in undesired ways.
I made these fields private and added corresponding getter methods.
In addition, I renamed the field 'globalThreadMaxPoolSize'
to 'globalThreadPoolSize' to be more consistent with the
'globalScheduledThreadPoolSize' field name.
I also adapted some tests to always call clearThreadPools after
the thread pool size configuration has been changed.
2. Protect against injecting null as thread pools
ActiveMQClient.injectPools allowed null as injected thread pools.
The effect was that internal threads pools were created,
but not shutdown correctly.
TheJMSVendor protocol convertor class was not creating the destinations so any destination calls, setTo and setJMSReplyTo, were ignored. Ive added a server side destination class to bypass the naming checks we have on the client and this now sets everything correctly
https://issues.apache.org/jira/browse/ARTEMIS-453
https://issues.apache.org/jira/browse/ARTEMIS-463
This will have some extra refactoring on the protocol head, transferring responsibility to the broker classes in a lot of cases
and removing some duplicated code
This was a team effort from Clebert Suconic and Howard Gao
This patch fixes a number of bugs with the JDBC Journal implementation.
Mainly around how it was handling transactions. The XA transactions
tests are now enabled to test both the File and Database store.
This feature required a bit of refactoring to the plugin interface itself as
well as a restriction on the configuration so that either only one plugin could
be specified or an ulimited number of security-setting matches. This was done
to prevent messy situations where a plugin could update settings from the XML
or even another plugin if there were overlapping matches.
DelegatingSession class wraps ClientSessionImpl and attempts to close
session should it not be closed by the user. It does this by
implementing finalize. However, the order in which finalize runs can be
difficult to predict as compilers, and JIT compilers are able to
optimize early.
The current DelegatingSession was causing problems of finalize getting
called early (before consumers, producers were finished with the
session). This was causing tests to fail on the IBM JDK (which
optimizes early). The same happens on OpenJDK if the GC is forced.
Its now possible to also add the broker name to jmx tree avoiding clashes when multiple brokers are in a single vm. This is now the default but the old way can be used with some configuration
https://issues.apache.org/jira/browse/ARTEMIS-311
The old property-file based security manager shouldn't be used anymore. Instead
use the JAAS InVMLoginModule for in-vm tests, embedded use-cases, etc. and use
the other JAAS login modules for normal server use-cases.
The failback process needs to be deterministic rather than relying on various
incarnations of Thread.sleep() at crucial points. Important aspects of this
change include:
1) Make the initial replication synchronization process block at the very
last step and wait for a response from the replica to ensure the replica has
as the necessary data. This is a critical piece of knowledge during the
failback process because it allows the soon-to-become-backup server to know
for sure when it can shut itself down and allow the soon-to-become-live
server to take over. Also, introduce a new configuration element called
"initial-replication-sync-timeout" to conrol how long this blocking will occur.
2) Set the state of the server as 'LIVE' only after the server is fully
started. This is necessary because once the soon-to-be-backup server shuts
down it needs to know that the soon-to-be-live server has started fully before
it restarts itself as the new backup. If the soon-to-be-backup server restarts
before the soon-to-be-live is fully started then it won't actually become a
backup server but instead will become a live server which will break the
failback process.
3) Wait to receive the announcement of a backup server before failing-back.
Netty 4.x uses pooled buffers. These buffers can run out of memory when
transferring large amounts of data over connection. This was causing an
OutOfMemory exception to be thrown on the CoreBridge when tranferring
large messages. Netty provides a callback handler to notify listeners
when a Connection is writable. This patch adds the ability to register
connection writable listeners to the Netty connection and registers the
relevant callback from the Bridge to avoid writing when the buffers are
full.
It is possible for the closure of one resource to potentially impact
another since they are now sharing the same ServerLocator instance.
Keep track of references to avoid this.
In one situation I have seen a failrue on ProducerFlowControl to break everything else from here
This change will both avoid the failure and change the report of leaked threads so we can find them easily on the system.out when it happens (for future debugging)
Inbound sessions are always created from the same ActiveMQConnectionFactory
which means the load-balancing policy is applied to them in the expected
manner. However, outbound sessions are created from independent, unique
ActiveMQConnectionFactory instances which means that the load-balancing
doesn't follow the expected pattern.
This commit changes this behavior by caching each unique
ActiveMQConnectionFactory instance and using it for both inbound and outbound
sessions potentially. This ensures the sessions are load-balanced as
expected.
this is just calling Idea format on all the files using the new style
I am separating manual changes from automatic changes in case I have to repeat the manual changes again
https://issues.apache.org/jira/browse/ARTEMIS-163
On this pass I'm just converting the native layer to a simpler one.
It wasn't very easy to change the alignment at the current framework,
so I did some refactoring simplifying the native layer
The volume of the nubmer of changes here is because:
- The API is changed, we now don't close the libaio queue between files
- The native layer won't use malloc as much as it used to, saving some CPU and memory defragmentation
- I organized the code around nio and libaio
https://issues.apache.org/jira/browse/ARTEMIS-138
The list method should return an empty list in case of non existent folders,
So this would unveil whatever is the cause for non existent folders at the next level where it's happening
https://issues.apache.org/jira/browse/ARTEMIS-136
From what I researched from implementers of XA TM if you throw ERR over communication errors the transaction manager will create
an heuristic transaction to be manually dealt with.
Other XA Implementations (such as Oracle JDBC) are return FAIL over communication failures during any XA operation.
To reproduce this commit, apply a replace regex rule using:
search regex: /\*\*\n \* Licensed
replace: /\*\n \* Licensed
These files had to be changed manually:
artemis-selector/src/main/javacc/HyphenatedParser.jj
artemis-selector/src/main/javacc/StrictParser.jj
artemis-website/src/main/resources/styles/impact/css/pygmentize.css
artemis-website/src/main/resources/styles/impact/css/site.css
We had a few reported small issues on the codebase from the recent introduced google error prone.
This should eliminate any issues, and I am making sure these won't happen again
If standalone backup server with shared has defined scale-down policy
but it's disabled then backup does not activate. Problem is that
server is checking only whether scale down is defined but if it's
enabled. This causes that server.stop() is called and backup does
not activate.
Lots of work on the test-suite in this commit including:
- Rename ServiceTestBase to ActiveMQTestBase
- Make AddressSettings fluent
- Remove unnecessary tearDown() implementations
- Use ActiveMQTestBase.create*Locator() instead of
ActiveMQClient.createServerLocator*(..)
- Use fluent ServerLocator methods
- Make sure all ActiveMQServers.newActiveMQServer invocations
are surrounded with addServer() where appropriate
- Create a few example tests to be references from hacking-guide
- Update hacking-guide with more info on writing tests
- Refactor config creation methods in ActiveMQTestBase
This has bothered me for awhile, but writing the hacking guide has
given me an opportunity to refactor some of our test-suite to be
simpler, more consistent, and easier to understand. This is
important if we want users to provide well-written tests. Our
test-suite is an important part of the code-base and it should be
easy to write good tests.
Basically I just consolidated CoreUnitTestCase, UnitTestCase, and
ServiceTestBase into a single class named ServiceTestBase. I also
simplified some of the configuration creation methods to reduce
duplicated code.
This commit is a simple mv of the files.. We required two commits to preserve history,
one to git mv, one for the actual changes...
otherwise history would be lost
Based on the Apache ActiveMQ community vote this project is being
renamed "Artemis."
When sending a large message that exceeds the size of
Integer.MAX_VALUE, the bridge will get negative chunk size during
fowarding. And the resend cache is not limited so there is a
potential that it may get OutOfMemory exception.
this is basically addressing a performance issue on OpenWire, setting the auto-create to the PostOffice
after not being able to route
The core protocol stays the same in regard to the auto-create since the exceptions are happening after the queueQuery
Sometimes /tmp doesn't support ext4 (tmpfs) and there's always a risk of leaving unnatended files in cases of crashed.
This is in alignment with how other tests run at apache
If a Transaction wasn't created, the case for duplciate Detection would cancel a transaction that never happened
and it would get a NPE instead of a TX Exception.
It wasn't a big deal as the client got an exception anyways and the users were able to cancel in that case
but the message sent was a string containing just "Null".
this will fix it with a proper handling
https://issues.apache.org/jira/browse/ACTIVEMQ6-95
The message.copy is broken when you set persistence=false, and the bridge will use that method before forwarding the message
this commit is fixing NullStorageLargeServerMessage.copy and adding the proper testcase to validate the fix
https://issues.apache.org/jira/browse/ACTIVEMQ6-89
I have done a lot of refactoring on this. So we can a different version of the interceptor for each protocol based on a base class now.
Just an abstract class over Stomp would be a bit hacky... this is a better approach.
- Bumped up version to 2.0.0.Alpha
- Client bundle changes to be copmatible with 2.0.0
- Fixing bundle / Logging classes for missing format (it was an issue with the previous one already)
- Fixed up dependencies to avoid transient downloads
- removing unused methods
- moving JMSXdeliveryCountTest to /extra-tests
- A few transactions methods that were not being used and creating issues to the release
due to an old dependency to the TM
This closes#173
Returns an error to the client causing InvalidDestinationException to be
thrown when an ActiveMQ 5.x client attempts to create a producer with a
destination that does not exist. (Over OpenWire Protocol).
This was causing issues with javadoc
utils is also a package on activemq-server. ActiveMQUtilLogger is using a super class that was not part of the
source path on the javadoc plugin what caused it to exception and interrupt building
Fixing the classpath so some tests would find the LogManager configured
Fixing the dependency on the AssertionLoggerHandler so all the tests could also see it without further errors
My previous commit broke the location of the ServiceUtil / TransactionManagerLocator
This commit is setting a new DummyTM on the integration-tests-suite and the proper TM Locator on the extra-tests
With these changes the testsuite is not using any LGPL code by default. Anything woud go through extra-tests
These following changes were made on this commit (in summary):
- renamed byteman-tests as extra-tests
- added extra-tests on a new profile called extra-tests
- added all the other tests back to the tests profile
- removed concurrent-tests and moved them all to timing-tests
- removed old tests that were ignored for a long time and were stale
In some cases the ID Generator will be called after the JournalStorage was stopped.
AS a result you could have cases where the ID generator is called and the journal storage is stopped.
Also I added some check to IDs and added some code to cleanup old IDS on the BatchIDManager
Remove the reference to the JBoss Maven repo, and make all the necessary
adjustments on the child-projects. It turns out we don't even need the
security dependencies in the tests.
Implements a new feature for the broker whereby it may automatically
create and delete queues which are not explicitly defined through
the management API or file-based configuration when a client sends a
message to or receives from a queue via the AMQP protocol. Note,
the destination has to be named like "jms.queue.*" to be auto-
created. The queue may subsequently be deleted when it no longer has
any messages and consumers. Auto-creation and auto-deletion can both
be turned on/off via address-setting.
https://issues.apache.org/jira/browse/ACTIVEMQ6-7
Connection Factory is now externalizable and is now serialized as a string that represents a URI. There are schemas for every possible type for connection factory and server locator.
The client JNDI representation of factories has also been changed to be consistent with this.
This test started to fail after performance improvements from ACTIVEMQ6-78
After some investigation it turned out that this test was racing with the client
crashing even before the queue was created or sending a non persistent message
asynchronously while the client crashed before the server received the message.
I've also decreased some of the times on pings so the test could run a bit faster
Implements a new feature for the broker whereby it may automatically
create and delete queues which are not explicitly defined through
the management API or file-based configuration when a client sends a
message to or consumes from a queue via the STOMP protocol. Note,
the destination has to be named like "jms.queue.*" to be auto-
created. The queue may subsequently be deleted when it no longer has
any messages and consumers. Auto-creation and auto-deletion can both
be turned on/off via address-setting.
A transaction manager is only required on the JMSBridge when the QoS
level is set to ONCE_AND_ONCE_ONLY. Previous to the this patch it was
also checking for a TM on the AT_MOST_ONCE QoS level. This patch also
ensures that the TM is set to null after each test run.
These tests were not as broken as on 2.3.x from the old hornetq branch where this fix originated.
However I will play safe here as I believe the race could be after the exception is raised and before the counter was added
(on ActiveMQMessageHandlerTest)
Implements a feature whereby the broker will not shutdown while there are
clients connected. A timeout can be specified so that even if there are
clients connected the broker will still shutdown after a certain time.
Some of the OutgoingConnection and RA tests were failing due to a
previous transaction being present when using the Arjuna TM. This patch
adds methods to allow tests which TM to use and ensures that Dummy TM is
cleaned up each after each test.
https://issues.apache.org/jira/browse/ACTIVEMQ6-67
fixed distribution so that file based security works and hot deployers as broken and no longer needed with new bootstrap.
Also combined the jms and core configuration files.
Implements a new feature for the broker whereby it may automatically
create and delete JMS queues which are not explicitly defined through
the management API or file-based configuration. A JMS queue is created
in response to a sent message or connected consumer. The queue may
subsequently be deleted when it no longer has any messages and
consumers. Auto-creation and auto-deletion can both be turned on/off
via address-setting.
https://issues.apache.org/jira/browse/ACTIVEMQ6-68
The logic on transferring method is a bit complex, where
I found a better way to calculate the targetIDs.
This will also fix a few ScaleDownTests
I also added some extra tests using ScaleDownDirect
Some of the outgoing connection tests require a dummy transaction
manager to setup a fake transaction. The default transaction manager is
set to the JBoss TX manager and so the tests were failing. This patch
split the OutgoingConnectionTest into ones that require a real TM
manager vs Dummy TM Manager.
.
https://issues.apache.org/jira/browse/ACTIVEMQ6-64
The redelivery list was not isolated on the PageIterator. This is moving the
redelivery list to the Iterator so we would have proper isolation of the functionality.
The previous version was assuming a single instance of PageIterator, QueueImpl and PageSubscription.
When we started using more than one instance of the Iterator we created this bug.
- added missing license headers found by maven rat plugin.
most of them added automatically via apache-rat
a few manually added
- added apache-rat maven plugin to the build cycle
on the replication channel
The connection-ttl and client-failure-check-period are not passed
to the server locator used to create replication connection. So the
fix sets the two parameters in SharedNothingBackupActivation.
Some tests require a proper TM to be returned by the TMLocator
implementation whilst others require a DummyTM to be returned. This
patch makes allows TM returned by the locator class to be changed by the
test.
https://issues.apache.org/jira/browse/ACTIVEMQ6-54
Changing the order of depaging introduced an extra check that needs to be checked now.
This will probably take care of the issue by checking if the page is complete before depage.
Pulls out WildFly XA Recovery specifics into a different project. Some
XA recovery code is still present and is used as integration points for
integrating TM XA recovery processes.
https://issues.apache.org/jira/browse/ACTIVEMQ6-6
Removed the jboss security implementations and also implemented the location of Transaction Managers using Service Loader and removed the jboss implementation.
https://issues.apache.org/jira/browse/ACTIVEMQ6-54
This is fixing a few issues around paging:
- Browsing it not looking towards Paging. I'm using the queue.totalIterator which is a read-only iterator that goes towards the pages messages.
- Depage is not kicking correctly in some scenarios. I have improved the logic on scheduling depage for that.
https://issues.apache.org/jira/browse/ACTIVEMQ6-20
this has been identified as a dead feature.
It was only useful for presentations...
it had its time and we have better examples we can use...
It's time for this feature to go!
Adds a new service extensions components used to house any extension
points for integration and extension. In addition this patch adds
initial extension points for XAResource wrapping.
https://issues.apache.org/jira/browse/ACTIVEMQ6-44
The DiscoveryGroup should be resilient to failures on the communication.
We shouldn't kill the Loop if an exception happened during the read of the UDP messages.
https://issues.apache.org/jira/browse/ACTIVEMQ6-3
We are renaming packages from activemq6 to activemq as that's more generic and version independent
The previous commit renamed the directories. On this commit now I'm changing the code.
If we changed the code and the directories on the same commit git would remove and add a lot of files
without recognizing the renames.
https://issues.apache.org/jira/browse/ACTIVEMQ6-3
We are renaming packages from activemq6 to activemq as that's more generic and version independent
On this first commit I'm just renaming the directories otherwise the history would be lost. The next commit will rename the text on the directories.
If I squash these two commits git will make us delete / add again.
Clebert Suconic
Andy Taylor
Justin Bertram
Timothy Bish
Martyn Taylor
Howard Gao
Jiri Danek
Dejan Bosanac
Erich Duda
Francesco Nigro
Pat Fox
jbertram
Ville Skyttä
Ulf Lilleengen
Tomas Hofman
Paul Gallagher
Francesco Nigro
Jeff Mesnil
Gordon Sim
Bennet Schulz
bayern39
John D. Ament
Martin Styk
Erich Duda
Bernd Gutjahr
Lachezar Dobrev
Julian Scheid
Petter Nordlander
Thiago Kronig
mnovak
Thiago Kronig
Andy Taylor
jbertram
Howard Gao
Daniel Pocock
Jeff Genender
Claus Ibsen
nberdikov