Travis CI has been reporting test failures.
Looking on logs I could see a critical failure happening but not much information on why.
This will help identify further issues.
Make sure the correct buffer is used when decoding the stored Core
message that originated from the conversion of an AMQP message sent and
annotated as a JMS ObjectMessage which trips the large message boundary.
The cluster connection bridge has a TopologyListener and connects to a new node
each time it receives a nodeUp() event. It needs to put a check here to make
sure that the cluster bridge only connects to its target node and it's backups.
This issue shows up when you run LiveToLiveFailoverTest.testConsumerTransacted
test.
Also in this commit improvement of BackupSyncJournalTest so that it runs more
stable.
When creting a durable topic subscription using the Artemis 1.x JMS
client library. The client sends a QueueQuery to the server to see if
the durable subsciption queue already exists. The broker then performs
some transformation of the queue addresses to suit the 1.x naming
scheme. However, if the queue does not already exist the transform is
attempted on a null string causing NPE. To fix we simply check that the
result return isExists=true.
Add Test Case to stop and restart server after config reload and check state, this re-creates network health check issue where config changes are lost when network health check de-activates the server and then re-activates.
Add fix to update the held configuration thats used when initialisation steps during start are done.
connection
To prevent a socket from hanging open by a bad client the broker should
make sure to stop the transport if a connection attempt fails by an
OpenWire client
The method testStopConnectionDuringOnMessage in this class was relying
on sleep() calls for critical timing. This test fails sometimes on
fast-tests so I modified it to use a latch and a few waitFor calls to be
more deterministic. It also runs in a third of the time now.
Logging for the "fast-tests" profile used for PR builds could be reduced
significantly. This would save time as well as prevent log truncation
(Travis CI only supports logs up to 4MB).
Revert #1875
This reverts commit 5ad45369ce.
The storage manager is broken now as the AddressManager change here is trying to insert a record on the journal before startup.
- LargeServerMessageImpl.finalize is eventually causing deadlocks
- CoreMessage needs to check properties before decoding
- PagingTest tweaks
- ServerLocatorImpl can deadlock eventually, avoiding a lock and using actors
- ActiveMQServerImpl.finalize is also evil and can cause deadlocks on the testsuite
- MqttClusterRemoteSubscribeTest needs to setup the Address now on the setup
The PageCountPendingImpl was increasing the encode size without using its full allocation.
This was causing issues on replication as the encode is also used to determine the size of the packets.
however the packets were not receive the full allocated data causing missing packets on the replication
and test failures.
This is fixing the issue
Adding new metrics for tracking message counts and sizes on a Queue.
This includes tracking metrics for pending, delivering and scheduled
messages. The paging store also tracks message size now.
Support exlusive consumer
Allow default address level settings for exclusive consumer
Allow queue level setting in broker.xml
Add the ability to set queue settings via Core JMS using address. Similar to ActiveMQ 5.X
Allow for Core JMS client to define exclusive consumer using address parameters
Add tests
Make sure that if a bridge disconnects and there is no record in the topology that it uses the original bridge connector to reconnect.
Originally the live broker that disconnected was left in the Topology, thie broke quorum voting as when th evote happened all brokers when asked though th etarget broker was still alive.
The fix for this was to remove the target live broker from the Topology. Since the bridge reconnect logic relied on this in a non HA environment to reconnect this stopped working.
The fix now uses the original target connector (or backup) to reconnect in the case where the broker was actually removed from the cluster.
https://issues.apache.org/jira/browse/ARTEMIS-1654
When using the tool to import more than one large messages
from xml exported file, this utility class will create some
tmp files, each for one large message. However it only delete
one of the tmp files. All the rest of tmp files won't get
cleaned up.
HornetQClientProtocolManager is used to connect HornteQ servers.
During reconnect, it sends a CheckFailoverMessage packet to the
server as part of reconnection. This packet is not supported by
HornetQ server (existing release), so it will break the backward
compatibility.
Also fixed a failover issue where a hornetq NettyConnector's
ConnectorFactory is serialized to the clients who cannot
instantiate it because class not found exception.
ActiveMQTestBase has been enhanced to expose the Database storage configuration and by adding specific JDBC HA configuration properties.
JdbcLeaseLockTest and NettyFailoverTests have been changed in order to make use of the JDBC configuration provided by ActiveMQTestBase.
JdbcNodeManager has been made restartable to allow failover tests to reuse it after a failover.
Test consistency between live and backup, espacially on
a slow live.
The test use MessagePersister::encode to simulate slow IO condition.
After live started, we send 5 message with a delay(default 500ms),
then start backup, wait until replicated, then send more message
without delay. If all message sent successfully, the backup should
has the same messages as live. We assert the message number only.
Flag needs to be set when auto creating an address so that the address
can be removed later if auto delete is configured when creating a
subscription with MQTT
We provide a feature to mask passwords in the configuration files.
However, passwords in the bootstrap.xml (when the console is
secured with HTTPS) cannot be masked. This enhancement has
been opened to allow passwords in the bootstrap.xml to be masked
using the built-in masking feature provided by the broker.
Also the LDAPLoginModule configuration (in login.config) has a
connection password attribute that also needs this mask support.
In addition the ENC() syntax is supported for password masking
to replace the old 'mask-password' flag.
Change all use from Set<RoutingType> to EnumSet<RoutingType>
Deprecating any old exposed interfaces but keeping for back compatibility.
Address info to avoid iterator on getRoutingType hotpath, like wise can be avoided where single RoutingType is passed in.
When an address is removed from the address manager its linked addresses
also need to be removed if there are no more bindings for the address.
Also adding a null check on bindings of linked addresses when a new
binding is added
The UTF translations has been improved by:
- zero copy on array based buffers
- zero copy UTF length calculation
- faster array access using Netty PlatformDependent.get|putByte
- improved perf tests UTF8Test
* Move byte util code into ByteUtil
* Re-use the new equals method in SimpleString
* Apply same pools/interners to client decode
* Create String to SimpleString pools/interners for property access via String keys (producer and consumer benefits)
* Lazy init the pools on withing the get methods of CoreMessageObjectPools to get the specific pool, to avoid having this scattered every where.
* reduce SimpleString creation in conversion to/from core message methods with JMS wrapper.
* reduce SimpleString creation in conversion to/from Core in OpenWire, AMQP, MQTT.
Replace GenericSQLProvider and other implementation by a single
PropertySQLProvider that uses properties to define SQL queries.
SQL queries are loaded from the journal-sql.properties file.
Queries specific to a DB dialect can be specified by adding a suffix to
the key of the generic property.
For example, the generic property to create a file Table is:
create-file-table = CREATE TABLE %s (ID BIGINT AUTO_INCREMENT, ...)
This property can be customized for Derby by using the
create-file-table.derby property:
create-file-table.derby=CREATE TABLE %s (ID BIGINT NOT NULL GENERATED ALWAYS AS IDENTITY (START WITH 1, INCREMENT BY 1),...
JIRA: https://issues.apache.org/jira/browse/ARTEMIS-1590
The test is using the wrong indices for the destinations it uses so they
don't match the one's created in the test support class. Because the
code is now using the default routing type the test fails when it tries
to send a message on a JMS Queue when the auto created address default
to the multicast routing type.
Expose User associated with creating Queue on JMX QueueControl (as attribute)
Allow setting of the user to associate with creating the queue when configured in broker.xml (before only if created over wire is it possible to set the user)
These tests used to have a wrong name, so they weren't executed by
Surefire during a `mvn test` run.
After enablement, the following tests are now failing:
* org.apache.activemq.artemis.tests.integration.cluster.ha.HAAutomaticBackupSharedStoreTest
* org.apache.activemq.artemis.tests.integration.ra.OutgoingConnectionNoJTATest
* org.apache.activemq.artemis.tests.unit.core.server.group.impl.SystemPropertyOverrideTest.testSystemPropertyOverride
When openwire client uses compressed option to send messages
(jms.useCompression=true) openwire client failed to receive them.
The reason is in OpenwireMessageConverter.toAMQMessage():
1. message.setContent() should be called after setting properties
(It will cause the compressed content to decompressed before delivering to clients)
2. message.onSend() should not be called here (it should be used
by producers. If used here it changes the internal flags of the
message and cause receive to fail).
Revert "ARTEMIS-1545 Adding HornetQ 2.4.7 on the mesh to validate send-acks"
I'm reverting this as the testsuite is broken..
We will send it back once worked out.
This reverts commit 8f5b7a1e73.
This reverts commit 9b982b3e30.
Apply fix so that when using JNDI via tomcat resource it works.
Replace original extract of JNDIStorable taken from Qpid, and use ActiveMQ5's as fits better to address this issue. (which primary use case is users migrating from 5.x)
Refactored ActiveMQConnectionFactory to externalise and turn into reference by StringRefAddr's instead of custom RefAddr which isnt standard.
Refactored ActiveMQDestinations similar
Refactored ActiveMQDestination to remove redundent and duplicated name field and ensured getters still behave the same
https://issues.apache.org/jira/browse/ARTEMIS-1546
- the dependency scan is changed to allow adding an extra repository
- adding groovy so we won't require compilation dependencies (just runtime)
without needing reflection (thanks Groovy :) )
- Adding hornetq to the mesh of version tests
Unsubscribe topic in clustered environment left open references to the core consumer. This patch properly closes the consumer which results in correct removal of the consumer reference on a remote queue.
Openwire clients create consumers to advisory topics to receive
notifications. As a result there are internal queues created
on advisory topics. Those consumer shouldn't be exposed via
management APIs which are used by the Console
To fix that the broker doesn't register any queues from
advisory addresses.
Also refactors a code to remove Openwire specific contants
from AddressInfo class.
I'm doing an overal improvement on large message support for AMQP
However this commit is just about a Bug on the converter.
It will be moot after all the changes I'm making, but I would rather keep this separate
as a way to cherry-pick on previous versions eventually.
This test starts 2 servers and send messages to
a queue until it enters into paging state. Then
it changes the address max-size to -1, restarts
the 2 servers again and consumes all the messages.
It verifies that even if the max-size has changed
all the paged messages will be depaged and consumed.
No stuck messages after restarting.
The tests is there to guard a case where messages
won't be depaged on server restart after the max-size
is changed to -1. This issue has been fixed into
master along with the fix for ARTEMIS-581, particularly
the changes to the method PagingStoreImpl.getMaxSize().
Server.stop is currently waiting completions on Sessions just because of test cases.
With the recent changes made into the Executors this is not needed any longer
Instead of flushing we just need to make sure there are no more calls into
page executors as we stop the PageManager.
This will avoid any possible starvations or deadlocks here.
The MappedSequentialFile relies on the assumption that any writers
won't exceed the maximum capacity of the file, leaving the JVM to crash otherwise.
This commit adds proper bounds checking on write operations (and position changes too)
in order to provide recoverable effects if such scenario should occour.
In addition are provided minor fixes on Mapped and Nio SequentialFile::fill behaviour
to match the original contract.
- Added Wait.assert methods, what would make it easier to assert on future conditions
- Moved Wait to artemis-junit, we are now using that module on the testsuite
The Critical analyzer is supposed to catch Deadlocks, and such
can only be resolved by killing the VM.
This test is using shutdown as it would be a bit more complex to
handle Byteman to then halt the VM. This will validate the
CriticalAnalyzer is capturing the event, and in such it would halt the VM.
Added a new trustAll flag which will support trusting any client
keystore when doing testing against a broker. This setting should not
be used in production and is strictly for testing.
Extend test cases in MessageTypesTest to cover Core to AMQP combinations for all JMSTypeTests
Fix ServerJMSBytesMessage to correctly return bodyLength
Remove unused/dead code
Openwire consumer is listed twice below "consumers" tab.
First it shows correctly the requested queue consume.
Second it shows consumer from multicast queue ActiveMQ.Advisory.
The second one is internal and should be hidden.
In a cluster if a node is shut down (or crashed) when a
message is being routed to a remote binding, a internal
property may be added to the message and persisted. The
name of the property is like _AMQ_ROUTE_TOsf.my-cluster*.
if the node starts back, it will load and reroute this message
and if it goes to a local consumer, this property won't
get removed and goes to the client.
The fix is to remove this internal property before it
is sent to any client.
Update Tranformer to be able to handle initiation via propertiers (map<string, string>)
Update Configuration to have more specific transfromer configuration type, and to take properties.
Support back compatibility.
Add AddHeadersTransformer which is a main use case, and can act as example also.
Update Control's to expose new property configuration
Add test cases
Update examples for new transformer config style
- it is now possible to disable the TimedBuffer
- this is increasing the default on libaio maxAIO to 4k
- The Auto Tuning on the journal will use asynchronous writes to simulate what would happen on faster disks
- If you set datasync=false on the CLI, the system will suggest mapped and disable the buffer timeout
This closes#1436
This commit superseeds #1436 since it's now disabling the timed buffer through the CLI
Allows for JMS selectors on JMSCorrelationID as well as JMSXGroupID
and JMSXUserID along with some fixes to avoid an NPE case and fixes
to the conversion of AMQP MessageID and CorrelationID values when
doing cross protocol mappings. Adds new tests to cover more cases
of using the JMS selector with Qpid JMS and the AMQP test client.
If message senders and receivers uses different
wireformat.tightEncodingEnabled options, broker will get marshalling
problem. This is because when openwire messages are converted to
core messages, and later these core messages converted to openwire
messages, the broker uses a mashaller that comes with the connection
used to carry the messages.
For example, if a producer sents a message using option "wireformat
.tightEncodingEnabled=false" and a receiver tries to receive it
using 'true' for the same option, it'll never get it because the
broker will fail to use a "tight encoding" marshaller to
decode a 'loose encoded' message.
To fix the problem, we always use 'tight encoding' for internal
message converters.
Currently this test can take over 30seconds just itself. It seems we can safely reduce the number of messages to validate perf improvement greatly reducing test time.
By default, every openwire connection will create a queue
under the multicast address ActiveMQ.Advisory.TempQueue.
If a openwire client is create temporary queues these queues
will fill up with messages for as long as the associated
openwire connection is alive. It appears these messages
do not get consumed from the queues.
The reason behind is that advisory messages don't require
acknowledgement so the messages stay at the queue.
Added integration test, to prove issue, and assert fix.
Fix PersistentQueueBindingEncoding to return value, not false.
Fix some method arg name to align with class interface arg name
Added test case for cross protocol on JMSDeliveryMode proving issue, and asserting fix
Added fix to AmqpCoreConverter to ensure durability (JMSDeliveryMode) is retained.
Similar issue spotted with JMSPriority as with JMSDeliveyMode, fixing at the same time.
Added extra test case for jmspriority
Added fix for jmspriority
Add support to update Queue config via reload using existing updateQueue method at runtime.
Add/extend unit test cases to include testing reload of queue config.
Instead of wait to flush an executor,
I have added a method isFlushed() which will just translate to the
state on the OrderedExecutor.
In the case another executor is provided (for tests) there's a delegate
into normal executors.
delegate to the jdk saslServer. Allow acceptor configuration of supported mechanismis; saslMechanisms=<a,b>
and allow login config scope for krb5 to be configured via saslLoginConfigScope=x
When calling a consumer to receive message with a timeout
(receive(long timeout), if the consumer's buffer is empty, it sends
a 'forced delivery' the waiting forever, expecting the server to
send back a 'forced delivery" message if the queue is empty.
If the connection is disconnected as the arrived 'forced
delivery' message is corrupted, this 'forced delivery' message
never gets to consumer. After the session is reconnected,
the consumer never knows that and stays waiting.
To fix that we can send a 'forced delivery' to server right
after the session is reconnected.
The test is broken. It can be fixed by doing
```java
FakeTransportConnector(URI uri) {
setServer(new TransportServer {
@Override
public URI getConnectURI() {
return uri;
}
but then the test would fail because message
eviction is not supported by Artemis.
This change results in many more tests being run. Previously, 662 tests
were executed. Now, 1166 tests is executed. The running time has increased
from ~20 minutes to ~50 minutes.
Howard Gao
Ingo Weiss
Clebert Suconic
Timothy Bish
Francesco Nigro
saurabhrai
Martyn Taylor
Michael André Pearce
Ulf Lilleengen
gtully
Stanislav Knot
Justin Bertram
JiriOndrusek
jpoth
Christopher L. Shannon (cshannon)
17103355
raul.valdoleiros
Guillaume Nodet
Andy Taylor
Pat Fox
Robbie Gemmell
jostbg
Jeff Mesnil
shoukun
Jiri Danek
art-licis
xstefank
Tomas Kratky
Chris Burlinchon
Robert Godfrey
Jens Reimann
Erich Duda