Attempt to standardize all Logger declaration to a singular variable name
which makes the code more consistent and make finding usages of loggers in
the code a bit easier.
Commit 5a42de5fa6 called my attention to
this test. It really needs to be refactored because:
- It belongs in the integration-tests module rather than the MQTT
protocol module.
- It is using a lot of non-standard components (e.g.
EmbeddedJMSResource, Awaitility, etc.).
- It is overly complicated (e.g. using its own MqttClientService).
This commit resolves all those problems. The new implementation is quite
a bit different but still equivalent. I reverted the original fix from
ARTEMIS-2476 and the test still fails.
Logger statements should use formatting syntax and let the normal framework checks take care of
checking if a logger is enabled instead of string concats and isXEnabled logger checks except
in cases there is known expense to the specifc logging message/arg preparation or passing.
Changes from myself and Robbie Gemmell.
Co-authored-by: Robbie Gemmell <robbie@apache.org>
I was debugging Compacting, looking for a possible issue here in these conditions.
even though I found nothing wrong with the code, I still want to keep the test as there's no such thing as enough testing.
In commit a9a85f98db I removed the code
which modified existing matches. However, I forgot that the matches read
from LDAP are often duplicated so instead of always adding a new match
this commit ensures that the *right* match is modified rather than a
potentially more generic wildcard match (which was the original
problem).
If an AMQP consumer tries to receive a message and the broker is unable
to convert the message from core to AMQP then the consumer is
disconnected and the offending message stays in the queue. When the
consumer reconnects the conversion error will happen again resulting in
a loop that can only be resolved through administrative action (e.g.
deleting the message manually or sending it to a dead letter address).
This commit fixes that problem by detecting the conversion problem and
sending the message to the queue's dead letter address. It also doesn't
disconnect the consumer.
This commit also changes the log messages associated with sending a
message to the dead letter address since this event can now occur
regardless of the delivery attempts.
The map used by LastValueQueue was inadvertently changed to a
non-thread-safe implementation in
4a4765c39c. This resulted in an occasional
ConcurrentModificationException from the hashCode implementation.
This commit restores the thread-safe map implementation and adds a test
which brute-forces a CME when using the non-thread-safe implementation.
Sometimes users want to perform custom client ID validation, and in the
case of an invalid client ID the proper reason code should be returned
in the CONNACK packet.
When the LegacyLDAPSecuritySettingPlugin has enableListener set to true
and a new permission is added it will try to modify the existing match
if one exists. This is problematic if there's a more generic wildcard
match than the specific one that's modified.
This commit fixes that problem so that instead of modifying the existing
match(es) it simply adds a new one. The plugin never should have tried
modifying the existing match in the first place as two identical matches
would be a configuration error.
- Fixing RoleInfo to provide informations on deleteAddress.
- Adding more coverage on test to check the number of permissions
returned.
Signed-off-by: Emmanuel Hugonnet <ehugonne@redhat.com>
By allowing to pass caller's classname directly to org.apache.activemq.artemis.utils.ActiveMQThreadFactory#defaultThreadFactory instead of calculating it from stack.
Due to the changes in 682f505e32 we now
send "Last Will & Testament" MQTT messages via ServerSession. This means
sending will fail if the disk is full. For MQTT this triggers a
connection failure which in turns triggers sending an LWT message. This
process will recurse infinitely until it results in a
java.lang.StackOverflowError.
This commit fixes that by tracking whether or not sending a LWT message
is already in progress.
When a message is sent to an anycast queue via FQQN on one node of a
cluster and then a consumer is created on that same anycast queue via
FQQN on another node in the cluster the message is not redistributed to
the node with the consumer.
This commit fixes this use-case primarily by including the FQQN info in
the notification messages sent to other nodes in the cluster.
Using direct routing skips authorization for "Last Will and Testament"
messages (a.k.a. "will" messages). This commit fixes that problem by
using the internal session that is established for normal message
production and consumption.
Messages without a last-value property sent to an LVQ are being pruned
rather than just passing through. Only messages with a non-null
last-value property should be subject to pruning.
Running HorizontalPagingTest with these variables would make the test to fail unless these changes are applied.
export TEST_HORIZONTAL_SERVER_START_TIMEOUT=300000
export TEST_HORIZONTAL_TIMEOUT_MINUTES=120
export TEST_HORIZONTAL_PROTOCOL_LIST=OPENWIRE
export TEST_HORIZONTAL_OPENWIRE_DESTINATIONS=200
export TEST_HORIZONTAL_OPENWIRE_MESSAGES=1000
export TEST_HORIZONTAL_OPENWIRE_COMMIT_INTERVAL=100
export TEST_HORIZONTAL_OPENWIRE_RECEIVE_COMMIT_INTERVAL=0
export TEST_HORIZONTAL_OPENWIRE_MESSAGE_SIZE=20000
export TEST_HORIZONTAL_OPENWIRE_PARALLEL_SENDS=10
The OpenWire JMS client shipped with ActiveMQ "Classic" uses the
client's hostname as part of the `JMSMessageID`. Consumers may use this
data to select messages sent from particular hosts. Although this is
brittle and not recommended it is nonetheless possible.
However, when messages arrive to ActiveMQ Artemis they are converted
to core messages, and the broker doesn't properly map the selector from
`JMSMessageID` to the corresponding property on the underlying core
message. This commit fixes that problem. Changes include:
- Mapping selector from JMSMessageID to the internal __HDR_MESSAGE_ID
- Relocating some constant values so that both the protocol and commons
module can use them
- Adding a test
AddressControl has 2 methods to get same metric. Both
getNumberOfMessages() and getMessageCount() return the same metric
albeit in different ways.
Also, getNumberOfMessages() inspects both "local" and "remote" queue
bindings which is wrong.
This commit fixes these issues via the following changes:
- Deprecate getNumberOfMessages().
- Change getNumberOfMessages() to invoke getMessageCount().
- Add a test to ensure getNumberOfMessages() does not count remote
queue bindings.
- Simplify getMessageCount(DurabilityType).
The condition fixed on this commit should not really happen in production
as the compacting counts should always be ordered (records that were compacted earelier will always be at the top of the journal).
However it highlights an improvement that could be done on the journal compacting.
MQTT 3.1 and 3.1.1 clients using a clean session should have a
*non-durable* subscription queue. If the broker restarts the queue
should be removed. This is due to [MQTT-3.1.2-6] which states that the
session (and any state) must last only as long as the network
connection.
It would be useful to be able to cycle the embedded web server if, for
example, one needed to renew the SSL certificates. To support
functionality I made a handful of changes, e.g.:
- Refactoring WebServerComponent so that all the necessary
configuration would happen in the start() method.
- Refactoring WebServerComponentTest to re-use code.
It would be useful for security manager implementations to be able to
alter the client ID of MQTT connections.
This commit supports this functionality by moving the code which handles
the client ID *ahead* of the authentication code. There it sets the
client ID on the connection and thereafter any component (e.g. security
managers) which needs to inspect or modify it can do so on the
connection.
This commit also refactors the MQTT connection class to extend the
abstract connection class. This greatly simplifies the MQTT connection
class and will make it easier to maintain in the future.
Allow replication only certain addresses with mirror controller.
The configuration is similar to cluster address configuration.
Co-authored-by: Robbie Gemmell <robbie@apache.org>
The control existing in Redistributor is not needed as the Queue::deliver will already have a control on re-scheduling the loop and avoid holding references for too long.
When running a UDP connection factory you have to either keep it running, or close it so the UDP thread is closed.
this is an issue for the testsuite as we validate for leaked threads. This needs to be fixed on the test.
The MQTT 5 (and 3.1.1) specification states:
Until it has received the corresponding PUBREL packet, the receiver
MUST acknowledge any subsequent PUBLISH packet with the same Packet
Identifier by sending a PUBREC. It MUST NOT cause duplicate messages to
be delivered to any onward recipients in this case [MQTT-4.3.3-10].
The broker prevents a duplicate message, but it doesn't respond with a
PUBREC. This commit fixes that.
Removing the connection ID property from the actual *message* breaks the
nolocal functionality. Removing the property isn't necessary in the
first place so this commit reomves that code.
It is possible to receive a compressed message from the client as regular message. Such a message will already contain correct body size, that takes compression into account.
Paging only removes files at the beginning of the stream...
Say you have paged files 1 through 1000...
if all the messages are ack, but one message on file 1 is missing an ack, all the 999 subsequent files would not be removed until all the messages on file 1 is ack.
This was working as engineered, but sometimes devs don't have complete control on their app.
With this improvement we will now remove messages in the middle of the stream as well.
There is also some improvement to how browsing and page work with this
The commit includes the following changes:
- Don't drop the connection on subscribe or publish authorization
failures for 3.1 clients.
- Don't drop the connection on subscribe authorization failures for
3.1.1 clients.
- Add configuration parameter to control behavior on publish
authorization failures for 3.1.1 clients (either disconnect or not).
When using a temporary queue with a `temporary-queue-namespace` the
`AddressSettings` lookup wasn't correct. This commit fixes that and
refactors `QueueImpl` a bit so that it holds a copy of its
`AddressSettings` rather than looking them up all the time. If any
relevant `AddressSettings` changes the
`HierarchicalRepositoryChangeListener` implementation will still
refresh the `QueueImpl` appropriately.
The `QueueControlImpl` was likewise changed to get the dead-letter
address and expiry address directly from the `QueueImpl` rather than
looking them up in the `AddressSettings` repository.
I modified some code that came from ARTEMIS-734, but I ran the test that
was associated with that Jira (i.e.
`o.a.a.a.t.i.c.d.ExpireWhileLoadBalanceTest`) and it passed so I think
that should be fine. There actually was no test included with the
original commit. One was added later so it's hard to say for sure it
exactly captures the original issue.
When copying message properties from the core message to the OpenWire
message we intentially omit any properties starting with `_AMQ` and
`__HDR_`. However, we were effectively negating that logic because we
copied the marshalled properties directly to the message without any
filtering. Now that we no longer copy the marshalled properties directly
to the message the test breaks because it expects properties starting
with `__HDR_`. This commit fixes the test by removing those
expectations. The test is still valid because the message is still
receieved rather than being swallowed due to an exception (which was the
original problem).
I am adding a test showing it is safe to not wait pending callbacks before closing a file.
With this I can just close the file and let the kernel to deal with sending the completions.
It sometimes makes sense to set an acceptor's port to 0 to allow the JVM
to select an ephemeral port (e.g. in embedded integration tests). This
commit adds a new getter on NettyAcceptor so tests can programmtically
determine the actual port used by the acceptor.
This commit also changes the ACCEPTOR_STARTED notification and the
related logging to clarify the actual port value where clients can
connect.
Avoid storing the following values as byte[] for OpenWire:
- Marshalled properties. We already store the unmarshalled properties
so this is altogether redundant.
- Producer ID.
- Message ID.
- Various destination values.
Also, eliminate the "original transaction ID" conversion code as it's
never actually set from the incoming message.
JGroups 3.x hasn't been updated in some time now. The last release was
in April 2020 almost 2 years ago. Lots of protocols have been updated
and added and users are wanting to use them. There is also increasing
concern about using older components triggered mainly by other
recently-discovered high-profile vulnerabilities in the wider Open
Source Java community.
This commit bumps JGroups up to the latest release - 5.2.0.Final.
However, there is a cost associated with upgrading.
The old-style properties configuration is no longer supported. I think
it's unlikely that end-users are leveraging this because it is not
exposed via broker.xml. The JGroups XML configuration has been around
for a long time, is widely adopted, and is still supported. I expect
most (if not all) users are using this. However, a handful of tests
needed to be updated and/or removed to deal with this absence.
Some protocols and/or protocol properties are no longer supported. This
means that users may have to change their JGroups stack configurations
when they upgrade. For example, our own clustered-jgroups example had to
be updated or it wouldn't run properly.
MQTT 5 is an OASIS standard which debuted in March 2019. It boasts
numerous improvments over its predecessor (i.e. MQTT 3.1.1) which will
benefit users. These improvements are summarized in the specification
at:
https://docs.oasis-open.org/mqtt/mqtt/v5.0/os/mqtt-v5.0-os.html#_Toc3901293
The specification describes all the behavior necessary for a client or
server to conform. The spec is highlighted with special "normative"
conformance statements which distill the descriptions into concise
terms. The specification provides a helpful summary of all these
statements. See:
https://docs.oasis-open.org/mqtt/mqtt/v5.0/os/mqtt-v5.0-os.html#_Toc3901292
This commit implements all of the mandatory elements from the
specification and provides tests which are identified using the
corresponding normative conformance statement. All normative
conformance statements either have an explicit test or are noted in
comments with an explanation of why an explicit test doesn't exist. See
org.apache.activemq.artemis.tests.integration.mqtt5 for all those
details.
This commit also includes documentation about how to configure
everything related to the new MQTT 5 features.
The address-setting config-delete-diverts is not being applied correctly
hierarchically because it's not included in the merge() method. It is
also not being persisted to disk either. This commit fixes both issues.
* Add BindingDTO to allow configuring multiple addresses to listen on
* Start a new ServerConnector for each binding and deploy the corresponding web-applications
* Update documentation and tests
* Add tests to verify old and new configuration style produce equal results
* Add BindingDTO to allow configuring multiple addresses to listen on
* Start a new ServerConnector for each binding and deploy the corresponding web-applications
* Update documentation and tests
* Add tests to verify old and new configuration style produce equal results
scenario - avoid paging, if address is full chain another broker and produce to the head, consume from the tail using producer and consumer roles to partition connections. When tail is drained, drop it.
- adds a option to treat an idle consumer as slow
- adds basic support for credit based address blocking ARTEMIS-2097
- adds some more visiblity to address memory usage and balancer attribute modifier operations
Commit 481b73c8ca from ARTEMIS-3502
inadvertently broke this functionality. This commit restores the
original behavior.
autoDeleteAddress was renamed to forceAutoDeleteAddress which will ignore the address settings.
delete temporary queues will use forceAutoDeleteAddress=true.
this is done in collaboration with Justin Bertram
add bridge connection verification after stop cluster connection
to wait for the bridge stop completely and avoid a failure
on stop/start cluster connection test
Clebert Suconic
Gary Tully
Timothy Bish
Justin Bertram
Domenico Francesco Bruscino
Robbie Gemmell
Emmanuel Hugonnet
Rico Neubauer
AntonRoskvist
Yesenkov
iliya
nbrendah
Matteo Baccan
Luis De Bello
Erwin Dondorp
Marlon Müller
Asukwo-comfort
Tiago Bueno