activemq-artemis/docs/user-manual/en/rest.md

63 KiB

REST Interface

The ActiveMQ REST interface allows you to leverage the reliability and scalability features of ActiveMQ over a simple REST/HTTP interface. Messages are produced and consumed by sending and receiving simple HTTP messages that contain the content you want to push around. For instance, here's a simple example of posting an order to an order processing queue express as an HTTP message:

POST /queue/orders/create HTTP/1.1
Host: example.com
Content-Type: application/xml

<order>
   <name>Bill</name>
   <item>iPhone 4</item>
   <cost>$199.99</cost>
</order>

As you can see, we're just posting some arbitrary XML document to a URL. When the XML is received on the server is it processed within ActiveMQ as a JMS message and distributed through core ActiveMQ. Simple and easy. Consuming messages from a queue or topic looks very similar. We'll discuss the entire interface in detail later in this docbook.

Goals of REST Interface

Why would you want to use ActiveMQ's REST interface? What are the goals of the REST interface?

  • Easily usable by machine-based (code) clients.

  • Zero client footprint. We want ActiveMQ to be usable by any client/programming language that has an adequate HTTP client library. You shouldn't have to download, install, and configure a special library to interact with ActiveMQ.

  • Lightweight interoperability. The HTTP protocol is strong enough to be our message exchange protocol. Since interactions are RESTful the HTTP uniform interface provides all the interoperability you need to communicate between different languages, platforms, and even messaging implementations that choose to implement the same RESTful interface as ActiveMQ (i.e. the REST-* effort.)

  • No envelope (e.g. SOAP) or feed (e.g. Atom) format requirements. You shouldn't have to learn, use, or parse a specific XML document format in order to send and receive messages through ActiveMQ's REST interface.

  • Leverage the reliability, scalability, and clustering features of ActiveMQ on the back end without sacrificing the simplicity of a REST interface.

Installation and Configuration

ActiveMQ's REST interface is installed as a Web archive (WAR). It depends on the RESTEasy project and can currently only run within a servlet container. Installing the ActiveMQ REST interface is a little bit different depending whether ActiveMQ is already installed and configured for your environment (e.g. you're deploying within JBoss AS 7) or you want the ActiveMQ REST WAR to startup and manage the ActiveMQ server (e.g. you're deploying within something like Apache Tomcat).

Installing Within Pre-configured Environment

This section should be used when you want to use the ActiveMQ REST interface in an environment that already has ActiveMQ installed and running, e.g. JBoss AS 7. You must create a Web archive (.WAR) file with the following web.xml settings:

<web-app>
   <listener>
      <listener-class>
         org.jboss.resteasy.plugins.server.servlet.ResteasyBootstrap
      </listener-class>
   </listener>

   <listener>
      <listener-class>
         org.apache.activemq.rest.integration.RestMessagingBootstrapListener
      </listener-class>
   </listener>

   <filter>
      <filter-name>Rest-Messaging</filter-name>
      <filter-class>
         org.jboss.resteasy.plugins.server.servlet.FilterDispatcher
      </filter-class>
   </filter>

   <filter-mapping>
      <filter-name>Rest-Messaging</filter-name>
      <url-pattern>/*</url-pattern>
   </filter-mapping>
</web-app>

Within your WEB-INF/lib directory you must have the activemq-rest.jar file. If RESTEasy is not installed within your environment, you must add the RESTEasy jar files within the lib directory as well. Here's a sample Maven pom.xml that can build your WAR for this case.

<project xmlns="http://maven.apache.org/POM/4.0.0"
   xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">

   <modelVersion>4.0.0</modelVersion>
   <groupId>org.somebody</groupId>
   <artifactId>myapp</artifactId>
   <packaging>war</packaging>
   <name>My App</name>
   <version>0.1-SNAPSHOT</version>
   <repositories>
      <repository>
         <id>jboss</id>
         <url>http://repository.jboss.org/nexus/content/groups/public/</url>
      </repository>
   </repositories>

   <build>
      <plugins>
         <plugin>
            <groupId>org.apache.maven.plugins</groupId>
            <artifactId>maven-compiler-plugin</artifactId>
            <configuration>
               <source>1.6</source>
               <target>1.6</target>
            </configuration>
         </plugin>
      </plugins>
   </build>

   <dependencies>
      <dependency>
         <groupId>org.apache.activemq.rest</groupId>
         <artifactId>activemq-rest</artifactId>
         <version>2.3.0-SNAPSHOT</version>
      </dependency>
   </dependencies>
</project>

Note

JBoss AS 7 loads classes differently than previous versions. To work properly in AS 7 the WAR will need this in its MANIFEST.MF:

Dependencies: org.apache.activemq, org.jboss.netty

You can add this to the<plugins> section of the pom.xml to create this entry automatically:

<plugin>
   <groupId>org.apache.maven.plugins</groupId>
   <artifactId>maven-war-plugin</artifactId>
   <configuration>
      <archive>
         <manifestEntries>
            <Dependencies>org.apache.activemq, org.jboss.netty</Dependencies>
         </manifestEntries>
      </archive>
   </configuration>
</plugin>

It is worth noting that when deploying a WAR in a Java EE application server like AS7 the URL for the resulting application will include the name of the WAR by default. For example, if you've constructed a WAR as described above named "activemq-rest.war" then clients will access it at, e.g. http://localhost:8080/activemq-rest/[queues|topics]. We'll see more about this later.

Note

It is possible to put the WAR file at the "root context" of AS7, but that is beyond the scope of this documentation.

Bootstrapping ActiveMQ Along with REST

You can bootstrap ActiveMQ within your WAR as well. To do this, you must have the ActiveMQ core and JMS jars along with Netty, Resteasy, and the ActiveMQ REST jar within your WEB-INF/lib. You must also have a activemq-configuration.xml, activemq-jms.xml, and activemq-users.xml config files within WEB-INF/classes. The examples that come with the ActiveMQ REST distribution show how to do this. You must also add an additional listener to your web.xml file. Here's an example:

<web-app>
   <listener>
      <listener-class>
         org.jboss.resteasy.plugins.server.servlet.ResteasyBootstrap
      </listener-class>
   </listener>

   <listener>
      <listener-class>
         org.apache.activemq.rest.integration.ActiveMQBootstrapListener
      </listener-class>
   </listener>

   <listener>
      <listener-class>
         org.apache.activemq.rest.integration.RestMessagingBootstrapListener
      </listener-class>
   </listener>

   <filter>
      <filter-name>Rest-Messaging</filter-name>
      <filter-class>
         org.jboss.resteasy.plugins.server.servlet.FilterDispatcher
      </filter-class>
   </filter>

   <filter-mapping>
      <filter-name>Rest-Messaging</filter-name>
      <url-pattern>/*</url-pattern>
   </filter-mapping>
</web-app>

Here's a Maven pom.xml file for creating a WAR for this environment. Make sure your activemq configuration files are within the src/main/resources directory so that they are stuffed within the WAR's WEB-INF/classes directory!

<project xmlns="http://maven.apache.org/POM/4.0.0"
   xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">

   <modelVersion>4.0.0</modelVersion>
   <groupId>org.somebody</groupId>
   <artifactId>myapp</artifactId>
   <packaging>war</packaging>
   <name>My App</name>
   <version>0.1-SNAPSHOT</version>
   <repositories>
      <repository>
         <id>jboss</id>
         <url>http://repository.jboss.org/nexus/content/groups/public/</url>
      </repository>
   </repositories>
   <build>
      <plugins>
         <plugin>
            <groupId>org.apache.maven.plugins</groupId>
            <artifactId>maven-compiler-plugin</artifactId>
            <configuration>
               <source>1.6</source>
               <target>1.6</target>
            </configuration>
         </plugin>
      </plugins>
   </build>
   <dependencies>
      <dependency>
         <groupId>org.apache.activemq</groupId>
         <artifactId>activemq-core</artifactId>
         <version>2.3.0-SNAPSHOT</version>
      </dependency>
      <dependency>
         <groupId>io.netty</groupId>
         <artifactId>netty</artifactId>
         <version>3.4.5.Final</version>
      </dependency>
      <dependency>
         <groupId>org.apache.activemq</groupId>
         <artifactId>activemq-jms</artifactId>
         <version>2.3.0-SNAPSHOT</version>
      </dependency>
      <dependency>
         <groupId>org.jboss.spec.javax.jms</groupId>
         <artifactId>jboss-jms-api_2.0_spec</artifactId>
         <version>1.0.0.Final</version>
      </dependency>
      <dependency>
         <groupId>org.apache.activemq.rest</groupId>
         <artifactId>activemq-rest</artifactId>
         <version>2.3.0-SNAPSHOT</version>
      </dependency>
      <dependency>
         <groupId>org.jboss.resteasy</groupId>
         <artifactId>resteasy-jaxrs</artifactId>
         <version>2.3.4.Final</version>
      </dependency>
      <dependency>
         <groupId>org.jboss.resteasy</groupId>
         <artifactId>resteasy-jaxb-provider</artifactId>
         <version>2.3.4.Final</version>
      </dependency>
   </dependencies>
</project>

REST Configuration

The ActiveMQ REST implementation does have some configuration options. These are configured via XML configuration file that must be in your WEB-INF/classes directory. You must set the web.xml context-param rest.messaging.config.file to specify the name of the configuration file. Below is the format of the XML configuration file and the default values for each.

<rest-messaging>
   <server-in-vm-id>0</server-in-vm-id>
   <use-link-headers>false</use-link-headers>
   <default-durable-send>false</default-durable-send>
   <dups-ok>true</dups-ok>
   <topic-push-store-dir>topic-push-store</topic-push-store-dir>
   <queue-push-store-dir>queue-push-store</queue-push-store-dir>
   <producer-time-to-live>0</producer-time-to-live>
   <producer-session-pool-size>10</producer-session-pool-size>
   <session-timeout-task-interval>1</session-timeout-task-interval>
   <consumer-session-timeout-seconds>300</consumer-session-timeout-seconds>
   <consumer-window-size>-1</consumer-window-size>
</rest-messaging>

Let's give an explanation of each config option.

  • server-in-vm-id. The ActiveMQ REST impl uses the IN-VM transport to communicate with ActiveMQ. It uses the default server id, which is "0".

  • use-link-headers. By default, all links (URLs) are published using custom headers. You can instead have the ActiveMQ REST implementation publish links using the Link Header specification instead if you desire.

  • default-durable-send. Whether a posted message should be persisted by default if the user does not specify a durable query parameter.

  • dups-ok. If this is true, no duplicate detection protocol will be enforced for message posting.

  • topic-push-store-dir. This must be a relative or absolute file system path. This is a directory where push registrations for topics are stored. See Pushing Messages.

  • queue-push-store-dir. This must be a relative or absolute file system path. This is a directory where push registrations for queues are stored. See Pushing Messages.

  • producer-session-pool-size. The REST implementation pools ActiveMQ sessions for sending messages. This is the size of the pool. That number of sessions will be created at startup time.

  • producer-time-to-live. Default time to live for posted messages. Default is no ttl.

  • session-timeout-task-interval. Pull consumers and pull subscriptions can time out. This is the interval the thread that checks for timed-out sessions will run at. A value of 1 means it will run every 1 second.

  • consumer-session-timeout-seconds. Timeout in seconds for pull consumers/subscriptions that remain idle for that amount of time.

  • consumer-window-size. For consumers, this config option is the same as the ActiveMQ one of the same name. It will be used by sessions created by the ActiveMQ REST implementation.

ActiveMQ REST Interface Basics

The ActiveMQ REST interface publishes a variety of REST resources to perform various tasks on a queue or topic. Only the top-level queue and topic URI schemes are published to the outside world. You must discover all over resources to interact with by looking for and traversing links. You'll find published links within custom response headers and embedded in published XML representations. Let's look at how this works.

Queue and Topic Resources

To interact with a queue or topic you do a HEAD or GET request on the following relative URI pattern:

/queues/{name}
/topics/{name}

The base of the URI is the base URL of the WAR you deployed the ActiveMQ REST server within as defined in the Installation and Configuration section of this document. Replace the {name} string within the above URI pattern with the name of the queue or topic you are interested in interacting with. For example if you have configured a JMS topic named "foo" within your activemq-jms.xml file, the URI name should be "jms.topic.foo". If you have configured a JMS queue name "bar" within your activemq-jms.xml file, the URI name should be "jms.queue.bar". Internally, ActiveMQ prepends the "jms.topic" or "jms.queue" strings to the name of the deployed destination. Next, perform your HEAD or GET request on this URI. Here's what a request/response would look like.

HEAD /queues/jms.queue.bar HTTP/1.1
Host: example.com

--- Response ---
HTTP/1.1 200 Ok
msg-create: http://example.com/queues/jms.queue.bar/create
msg-create-with-id: http://example.com/queues/jms.queue.bar/create/{id}
msg-pull-consumers: http://example.com/queues/jms.queue.bar/pull-consumers
msg-push-consumers: http://example.com/queues/jms.queue.bar/push-consumers

Note

You can use the "curl" utility to test this easily. Simply execute a command like this:

curl --head http://example.com/queues/jms.queue.bar

The HEAD or GET response contains a number of custom response headers that are URLs to additional REST resources that allow you to interact with the queue or topic in different ways. It is important not to rely on the scheme of the URLs returned within these headers as they are an implementation detail. Treat them as opaque and query for them each and every time you initially interact (at boot time) with the server. If you treat all URLs as opaque then you will be isolated from implementation changes as the ActiveMQ REST interface evolves over time.

Queue Resource Response Headers

Below is a list of response headers you should expect when interacting with a Queue resource.

  • msg-create. This is a URL you POST messages to. The semantics of this link are described in Posting Messages.

  • msg-create-with-id. This is a URL template you can use to POST messages. The semantics of this link are described in Posting Messages.

  • msg-pull-consumers. This is a URL for creating consumers that will pull from a queue. The semantics of this link are described in Consuming Messages via Pull.

  • msg-push-consumers. This is a URL for registering other URLs you want the ActiveMQ REST server to push messages to. The semantics of this link are described in Pushing Messages.

Topic Resource Response Headers

Below is a list of response headers you should expect when interacting with a Topic resource.

  • msg-create. This is a URL you POST messages to. The semantics of this link are described in Posting Messages.

  • msg-create-with-id. This is a URL template you can use to POST messages. The semantics of this link are described in Posting Messages.

  • msg-pull-subscriptions. This is a URL for creating subscribers that will pull from a topic. The semantics of this link are described in Consuming Messages via Pull.

  • msg-push-subscriptions. This is a URL for registering other URLs you want the ActiveMQ REST server to push messages to. The semantics of this link are described in Pushing Messages.

Posting Messages

This chapter discusses the protocol for posting messages to a queue or a topic. In ActiveMQ REST Interface Basics, you saw that a queue or topic resource publishes variable custom headers that are links to other RESTful resources. The msg-create header is a URL you can post a message to. Messages are published to a queue or topic by sending a simple HTTP message to the URL published by the msg-create header. The HTTP message contains whatever content you want to publish to the ActiveMQ destination. Here's an example scenario:

Note

You can also post messages to the URL template found in msg-create-with-id, but this is a more advanced use-case involving duplicate detection that we will discuss later in this section.

  1. Obtain the starting msg-create header from the queue or topic resource.

    HEAD /queues/jms.queue.bar HTTP/1.1
    Host: example.com
    
    --- Response ---
    HTTP/1.1 200 Ok
    msg-create: http://example.com/queues/jms.queue.bar/create
    msg-create-with-id: http://example.com/queues/jms.queue.bar/create/{id}
    
  2. Do a POST to the URL contained in the msg-create header.

    POST /queues/jms.queue.bar/create
    Host: example.com
    Content-Type: application/xml
    
    <order>
       <name>Bill</name>
       <item>iPhone4</name>
       <cost>$199.99</cost>
    </order>
    
    --- Response ---
    HTTP/1.1 201 Created
    msg-create-next: http://example.com/queues/jms.queue.bar/create
    

    Note

    You can use the "curl" utility to test this easily. Simply execute a command like this:

    curl --verbose --data "123" http://example.com/queues/jms.queue.bar/create
    

    A successful response will return a 201 response code. Also notice that a msg-create-next response header is sent as well. You must use this URL to POST your next message.

  3. POST your next message to the queue using the URL returned in the msg-create-next header.

    POST /queues/jms.queue.bar/create
    Host: example.com
    Content-Type: application/xml
    
    <order>
       <name>Monica</name>
       <item>iPad</item>
       <cost>$499.99</cost>
    </order>
    
    --- Response --
    HTTP/1.1 201 Created
    msg-create-next: http://example.com/queues/jms.queue.bar/create
    

    Continue using the new msg-create-next header returned with each response.

Warning

It is VERY IMPORTANT that you never re-use returned msg-create-next headers to post new messages. If the dups-ok configuration property is set to false on the server then this URL will be uniquely generated for each message and used for duplicate detection. If you lose the URL within the msg-create-next header, then just go back to the queue or topic resource to get the msg-create URL again.

Duplicate Detection

Sometimes you might have network problems when posting new messages to a queue or topic. You may do a POST and never receive a response. Unfortunately, you don't know whether or not the server received the message and so a re-post of the message might cause duplicates to be posted to the queue or topic. By default, the ActiveMQ REST interface is configured to accept and post duplicate messages. You can change this by turning on duplicate message detection by setting the dups-ok config option to false as described in ActiveMQ REST Interface Basics. When you do this, the initial POST to the msg-create URL will redirect you, using the standard HTTP 307 redirection mechanism to a unique URL to POST to. All other interactions remain the same as discussed earlier. Here's an example:

  1. Obtain the starting msg-create header from the queue or topic resource.

    HEAD /queues/jms.queue.bar HTTP/1.1
    Host: example.com
    
    --- Response ---
    HTTP/1.1 200 Ok
    msg-create: http://example.com/queues/jms.queue.bar/create
    msg-create-with-id: http://example.com/queues/jms.queue.bar/create/{id}
    
  2. Do a POST to the URL contained in the msg-create header.

    POST /queues/jms.queue.bar/create
    Host: example.com
    Content-Type: application/xml
    
    <order>
       <name>Bill</name>
       <item>iPhone4</name>
       <cost>$199.99</cost>
    </order>
    
    --- Response ---
    HTTP/1.1 307 Redirect
    Location: http://example.com/queues/jms.queue.bar/create/13582001787372
    

    A successful response will return a 307 response code. This is standard HTTP protocol. It is telling you that you must re-POST to the URL contained within the Location header.

  3. re-POST your message to the URL provided within the Location header.

    POST /queues/jms.queue.bar/create/13582001787372
    Host: example.com
    Content-Type: application/xml
    
    <order>
       <name>Bill</name>
       <item>iPhone4</name>
       <cost>$199.99</cost>
    </order>
    
    --- Response --
    HTTP/1.1 201 Created
    msg-create-next: http://example.com/queues/jms.queue.bar/create/13582001787373
    

    You should receive a 201 Created response. If there is a network failure, just re-POST to the Location header. For new messages, use the returned msg-create-next header returned with each response.

  4. POST any new message to the returned msg-create-next header.

    POST /queues/jms.queue.bar/create/13582001787373
    Host: example.com
    Content-Type: application/xml
    
    <order>
       <name>Monica</name>
       <item>iPad</name>
       <cost>$499.99</cost>
    </order>
    
    --- Response --
    HTTP/1.1 201 Created
    msg-create-next: http://example.com/queues/jms.queue.bar/create/13582001787374
    

    If there ever is a network problem, just repost to the URL provided in the msg-create-next header.

How can this work? As you can see, with each successful response, the ActiveMQ REST server returns a uniquely generated URL within the msg-create-next header. This URL is dedicated to the next new message you want to post. Behind the scenes, the code extracts an identify from the URL and uses ActiveMQ's duplicate detection mechanism by setting the DUPLICATE_DETECTION_ID property of the JMS message that is actually posted to the system.

If you happen to use the same ID more than once you'll see a message like this on the server:

WARN  [org.apache.activemq.core.server] (Thread-3 (ActiveMQ-remoting-threads-ActiveMQServerImpl::serverUUID=8d6be6f8-5e8b-11e2-80db-51bbde66f473-26319292-267207)) HQ112098: Duplicate message detected - message will not be routed. Message information:
ServerMessage[messageID=20,priority=4, bodySize=1500,expiration=0, durable=true, address=jms.queue.bar,properties=TypedProperties[{http_content$type=application/x-www-form-urlencoded, http_content$length=3, postedAsHttpMessage=true, _HQ_DUPL_ID=42}]]@12835058

An alternative to this approach is to use the msg-create-with-id header. This is not an invokable URL, but a URL template. The idea is that the client provides the DUPLICATE_DETECTION_ID and creates its own create-next URL. The msg-create-with-id header looks like this (you've see it in previous examples, but we haven't used it):

msg-create-with-id: http://example.com/queues/jms.queue.bar/create/{id}

You see that it is a regular URL appended with a {id}. This {id} is a pattern matching substring. A client would generate its DUPLICATE_DETECTION_ID and replace {id} with that generated id, then POST to the new URL. The URL the client creates works exactly like a create-next URL described earlier. The response of this POST would also return a new msg-create-next header. The client can continue to generate its own DUPLICATE_DETECTION_ID, or use the new URL returned via the msg-create-next header.

The advantage of this approach is that the client does not have to repost the message. It also only has to come up with a unique DUPLICATE_DETECTION_ID once.

Persistent Messages

By default, posted messages are not durable and will not be persisted in ActiveMQ's journal. You can create durable messages by modifying the default configuration as expressed in Chapter 2 so that all messages are persisted when sent. Alternatively, you can set a URL query parameter called durable to true when you post your messages to the URLs returned in the msg-create, msg-create-with-id, or msg-create-next headers. here's an example of that.

POST /queues/jms.queue.bar/create?durable=true
Host: example.com
Content-Type: application/xml

<order>
   <name>Bill</name>
   <item>iPhone4</item>
   <cost>$199.99</cost>
</order>

TTL, Expiration and Priority

You can set the time to live, expiration, and/or the priority of the message in the queue or topic by setting an additional query parameter. The expiration query parameter is an long specify the time in milliseconds since epoch (a long date). The ttl query parameter is a time in milliseconds you want the message active. The priority is another query parameter with an integer value between 0 and 9 expressing the priority of the message. i.e.:

POST /queues/jms.queue.bar/create?expiration=30000&priority=3
Host: example.com
Content-Type: application/xml

<order>
   <name>Bill</name>
   <item>iPhone4</item>
   <cost>$199.99</cost>
</order>

Consuming Messages via Pull

There are two different ways to consume messages from a topic or queue. You can wait and have the messaging server push them to you, or you can continuously poll the server yourself to see if messages are available. This chapter discusses the latter. Consuming messages via a pull works almost identically for queues and topics with some minor, but important caveats. To start consuming you must create a consumer resource on the server that is dedicated to your client. Now, this pretty much breaks the stateless principle of REST, but after much prototyping, this is the best way to work most effectively with ActiveMQ through a REST interface.

You create consumer resources by doing a simple POST to the URL published by the msg-pull-consumers response header if you are interacting with a queue, the msg-pull-subscribers response header if you're interacting with a topic. These headers are provided by the main queue or topic resource discussed in ActiveMQ REST Interface Basics. Doing an empty POST to one of these URLs will create a consumer resource that follows an auto-acknowledge protocol and, if you are interacting with a topic, creates a temporarily subscription to the topic. If you want to use the acknowledgement protocol and/or create a durable subscription (topics only), then you must use the form parameters (application/x-www-form-urlencoded) described below.

  • autoAck. A value of true or false can be given. This defaults to true if you do not pass this parameter.

  • durable. A value of true or false can be given. This defaults to false if you do not pass this parameter. Only available on topics. This specifies whether you want a durable subscription or not. A durable subscription persists through server restart.

  • name. This is the name of the durable subscription. If you do not provide this parameter, the name will be automatically generated by the server. Only usable on topics.

  • selector. This is an optional JMS selector string. The ActiveMQ REST interface adds HTTP headers to the JMS message for REST produced messages. HTTP headers are prefixed with "http_" and every '-' character is converted to a '$'.

  • idle-timeout. For a topic subscription, idle time in milliseconds in which the consumer connections will be closed if idle.

  • delete-when-idle. Boolean value, If true, a topic subscription will be deleted (even if it is durable) when an the idle timeout is reached.

Note

If you have multiple pull-consumers active at the same time on the same destination be aware that unless the consumer-window-size is 0 then one consumer might buffer messages while the other consumer gets none.

Auto-Acknowledge

This section focuses on the auto-acknowledge protocol for consuming messages via a pull. Here's a list of the response headers and URLs you'll be interested in.

  • msg-pull-consumers. The URL of a factory resource for creating queue consumer resources. You will pull from these created resources.

  • msg-pull-subscriptions. The URL of a factory resource for creating topic subscription resources. You will pull from the created resources.

  • msg-consume-next. The URL you will pull the next message from. This is returned with every response.

  • msg-consumer. This is a URL pointing back to the consumer or subscription resource created for the client.

Creating an Auto-Ack Consumer or Subscription

Here is an example of creating an auto-acknowledged queue pull consumer.

  1. Find the pull-consumers URL by doing a HEAD or GET request to the base queue resource.

    HEAD /queues/jms.queue.bar HTTP/1.1
    Host: example.com
    
    --- Response ---
    HTTP/1.1 200 Ok
    msg-create: http://example.com/queues/jms.queue.bar/create
    msg-pull-consumers: http://example.com/queues/jms.queue.bar/pull-consumers
    msg-push-consumers: http://example.com/queues/jms.queue.bar/push-consumers
    
  2. Next do an empty POST to the URL returned in the msg-pull-consumers header.

    POST /queues/jms.queue.bar/pull-consumers HTTP/1.1
    Host: example.com
    
    --- response ---
    HTTP/1.1 201 Created
    Location: http://example.com/queues/jms.queue.bar/pull-consumers/auto-ack/333
    msg-consume-next: http://example.com/queues/jms.queue.bar/pull-consumers/auto-ack/333/consume-next-1
    

    The Location header points to the JMS consumer resource that was created on the server. It is good to remember this URL, although, as you'll see later, it is transmitted with each response just to remind you.

Creating an auto-acknowledged consumer for a topic is pretty much the same. Here's an example of creating a durable auto-acknowledged topic pull subscription.

  1. Find the pull-subscriptions URL by doing a HEAD or GET request to the base topic resource

    HEAD /topics/jms.topic.bar HTTP/1.1
    Host: example.com
    
    --- Response ---
    HTTP/1.1 200 Ok
    msg-create: http://example.com/topics/jms.topic.foo/create
    msg-pull-subscriptions: http://example.com/topics/jms.topic.foo/pull-subscriptions
    msg-push-subscriptions: http://example.com/topics/jms.topic.foo/push-subscriptions
    
  2. Next do a POST to the URL returned in the msg-pull-subscriptions header passing in a true value for the durable form parameter.

    POST /topics/jms.topic.foo/pull-subscriptions HTTP/1.1
    Host: example.com
    Content-Type: application/x-www-form-urlencoded
    
    durable=true
    
    --- Response ---
    HTTP/1.1 201 Created
    Location: http://example.com/topics/jms.topic.foo/pull-subscriptions/auto-ack/222
    msg-consume-next:
    http://example.com/topics/jms.topic.foo/pull-subscriptions/auto-ack/222/consume-next-1
    

    The Location header points to the JMS subscription resource that was created on the server. It is good to remember this URL, although, as you'll see later, it is transmitted with each response just to remind you.

Consuming Messages

After you have created a consumer resource, you are ready to start pulling messages from the server. Notice that when you created the consumer for either the queue or topic, the response contained a msg-consume-next response header. POST to the URL contained within this header to consume the next message in the queue or topic subscription. A successful POST causes the server to extract a message from the queue or topic subscription, acknowledge it, and return it to the consuming client. If there are no messages in the queue or topic subscription, a 503 (Service Unavailable) HTTP code is returned.

Warning

For both successful and unsuccessful posts to the msg-consume-next URL, the response will contain a new msg-consume-next header. You must ALWAYS use this new URL returned within the new msg-consume-next header to consume new messages.

Here's an example of pulling multiple messages from the consumer resource.

  1. Do a POST on the msg-consume-next URL that was returned with the consumer or subscription resource discussed earlier.

    POST /queues/jms.queue.bar/pull-consumers/consume-next-1
    Host: example.com
    
    --- Response ---
    HTTP/1.1 200 Ok
    Content-Type: application/xml
    msg-consume-next: http://example.com/queues/jms.queue.bar/pull-consumers/333/consume-next-2
    msg-consumer: http://example.com/queues/jms.queue.bar/pull-consumers/333
    
    <order>...</order>
    

    The POST returns the message consumed from the queue. It also returns a new msg-consume-next link. Use this new link to get the next message. Notice also a msg-consumer response header is returned. This is a URL that points back to the consumer or subscription resource. You will need that to clean up your connection after you are finished using the queue or topic.

  2. The POST returns the message consumed from the queue. It also returns a new msg-consume-next link. Use this new link to get the next message.

    POST /queues/jms.queue.bar/pull-consumers/consume-next-2
    Host: example.com
    
    --- Response ---
    Http/1.1 503 Service Unavailable
    Retry-After: 5
    msg-consume-next: http://example.com/queues/jms.queue.bar/pull-consumers/333/consume-next-2
    

    In this case, there are no messages in the queue, so we get a 503 response back. As per the HTTP 1.1 spec, a 503 response may return a Retry-After head specifying the time in seconds that you should retry a post. Also notice, that another new msg-consume-next URL is present. Although it probably is the same URL you used last post, get in the habit of using URLs returned in response headers as future versions of ActiveMQ REST might be redirecting you or adding additional data to the URL after timeouts like this.

  3. POST to the URL within the last msg-consume-next to get the next message.

    POST /queues/jms.queue.bar/pull-consumers/consume-next-2
    Host: example.com
    
    --- Response ---
    HTTP/1.1 200 Ok
    Content-Type: application/xml
    msg-consume-next: http://example.com/queues/jms.queue.bar/pull-consumers/333/consume-next-3
    
    <order>...</order>
    

Recovering From Network Failures

If you experience a network failure and do not know if your post to a msg-consume-next URL was successful or not, just re-do your POST. A POST to a msg-consume-next URL is idempotent, meaning that it will return the same result if you execute on any one msg-consume-next URL more than once. Behind the scenes, the consumer resource caches the last consumed message so that if there is a message failure and you do a re-post, the cached last message will be returned (along with a new msg-consume-next URL). This is the reason why the protocol always requires you to use the next new msg-consume-next URL returned with each response. Information about what state the client is in is embedded within the actual URL.

Recovering From Client or Server Crashes

If the server crashes and you do a POST to the msg-consume-next URL, the server will return a 412 (Preconditions Failed) response code. This is telling you that the URL you are using is out of sync with the server. The response will contain a new msg-consume-next header to invoke on.

If the client crashes there are multiple ways you can recover. If you have remembered the last msg-consume-next link, you can just re-POST to it. If you have remembered the consumer resource URL, you can do a GET or HEAD request to obtain a new msg-consume-next URL. If you have created a topic subscription using the name parameter discussed earlier, you can re-create the consumer. Re-creation will return a msg-consume-next URL you can use. If you cannot do any of these things, you will have to create a new consumer.

The problem with the auto-acknowledge protocol is that if the client or server crashes, it is possible for you to skip messages. The scenario would happen if the server crashes after auto-acknowledging a message and before the client receives the message. If you want more reliable messaging, then you must use the acknowledgement protocol.

Manual Acknowledgement

The manual acknowledgement protocol is similar to the auto-ack protocol except there is an additional round trip to the server to tell it that you have received the message and that the server can internally ack the message. Here is a list of the response headers you will be interested in.

  • msg-pull-consumers. The URL of a factory resource for creating queue consumer resources. You will pull from these created resources

  • msg-pull-subscriptions. The URL of a factory resource for creating topic subscription resources. You will pull from the created resources.

  • msg-acknowledge-next. URL used to obtain the next message in the queue or topic subscription. It does not acknowledge the message though.

  • msg-acknowledgement. URL used to acknowledge a message.

  • msg-consumer. This is a URL pointing back to the consumer or subscription resource created for the client.

Creating manually-acknowledged consumers or subscriptions

Here is an example of creating an auto-acknowledged queue pull consumer.

  1. Find the pull-consumers URL by doing a HEAD or GET request to the base queue resource.

    HEAD /queues/jms.queue.bar HTTP/1.1
    Host: example.com
    
    --- Response ---
    HTTP/1.1 200 Ok
    msg-create: http://example.com/queues/jms.queue.bar/create
    msg-pull-consumers: http://example.com/queues/jms.queue.bar/pull-consumers
    msg-push-consumers: http://example.com/queues/jms.queue.bar/push-consumers
    
  2. Next do a POST to the URL returned in the msg-pull-consumers header passing in a false value to the autoAck form parameter .

    POST /queues/jms.queue.bar/pull-consumers HTTP/1.1
    Host: example.com
    Content-Type: application/x-www-form-urlencoded
    
    autoAck=false
    
    --- response ---
    HTTP/1.1 201 Created
    Location: http://example.com/queues/jms.queue.bar/pull-consumers/acknowledged/333
    msg-acknowledge-next: http://example.com/queues/jms.queue.bar/pull-consumers/acknowledged/333/acknowledge-next-1
    

    The Location header points to the JMS consumer resource that was created on the server. It is good to remember this URL, although, as you'll see later, it is transmitted with each response just to remind you.

Creating an manually-acknowledged consumer for a topic is pretty much the same. Here's an example of creating a durable manually-acknowledged topic pull subscription.

  1. Find the pull-subscriptions URL by doing a HEAD or GET request to the base topic resource

    HEAD /topics/jms.topic.bar HTTP/1.1
    Host: example.com
    
    --- Response ---
    HTTP/1.1 200 Ok
    msg-create: http://example.com/topics/jms.topic.foo/create
    msg-pull-subscriptions: http://example.com/topics/jms.topic.foo/pull-subscriptions
    msg-push-subscriptions: http://example.com/topics/jms.topic.foo/push-subscriptions
    
  2. Next do a POST to the URL returned in the msg-pull-subscriptions header passing in a true value for the durable form parameter and a false value to the autoAck form parameter.

    POST /topics/jms.topic.foo/pull-subscriptions HTTP/1.1
    Host: example.com
    Content-Type: application/x-www-form-urlencoded
    
    durable=true&autoAck=false
    
    --- Response ---
    HTTP/1.1 201 Created
    Location: http://example.com/topics/jms.topic.foo/pull-subscriptions/acknowledged/222
    msg-acknowledge-next:
    http://example.com/topics/jms.topic.foo/pull-subscriptions/acknowledged/222/consume-next-1
    

    The Location header points to the JMS subscription resource that was created on the server. It is good to remember this URL, although, as you'll see later, it is transmitted with each response just to remind you.

Consuming and Acknowledging a Message

After you have created a consumer resource, you are ready to start pulling messages from the server. Notice that when you created the consumer for either the queue or topic, the response contained a msg-acknowledge-next response header. POST to the URL contained within this header to consume the next message in the queue or topic subscription. If there are no messages in the queue or topic subscription, a 503 (Service Unavailable) HTTP code is returned. A successful POST causes the server to extract a message from the queue or topic subscription and return it to the consuming client. It does not acknowledge the message though. The response will contain the acknowledgement header which you will use to acknowledge the message.

Here's an example of pulling multiple messages from the consumer resource.

  1. Do a POST on the msg-acknowledge-next URL that was returned with the consumer or subscription resource discussed earlier.

    POST /queues/jms.queue.bar/pull-consumers/consume-next-1
    Host: example.com
    
    --- Response ---
    HTTP/1.1 200 Ok
    Content-Type: application/xml
    msg-acknowledgement:
    http://example.com/queues/jms.queue.bar/pull-consumers/333/acknowledgement/2
    msg-consumer: http://example.com/queues/jms.queue.bar/pull-consumers/333
    
    <order>...</order>
    

    The POST returns the message consumed from the queue. It also returns amsg-acknowledgement link. You will use this new link to acknowledge the message. Notice also a msg-consumer response header is returned. This is a URL that points back to the consumer or subscription resource. You will need that to clean up your connection after you are finished using the queue or topic.

  2. Acknowledge or unacknowledge the message by doing a POST to the URL contained in the msg-acknowledgement header. You must pass an acknowledge form parameter set to true or false depending on whether you want to acknowledge or unacknowledge the message on the server.

    POST /queues/jms.queue.bar/pull-consumers/acknowledgement/2
    Host: example.com
    Content-Type: application/x-www-form-urlencoded
    
    acknowledge=true
    
    --- Response ---
    Http/1.1 200 Ok
    msg-acknowledge-next:
    http://example.com/queues/jms.queue.bar/pull-consumers/333/acknowledge-next-2
    

    Whether you acknowledge or unacknowledge the message, the response will contain a new msg-acknowledge-next header that you must use to obtain the next message.

Recovering From Network Failures

If you experience a network failure and do not know if your post to a msg-acknowledge-next or msg-acknowledgement URL was successful or not, just re-do your POST. A POST to one of these URLs is idempotent, meaning that it will return the same result if you re-post. Behind the scenes, the consumer resource keeps track of its current state. If the last action was a call tomsg-acknowledge-next, it will have the last message cached, so that if a re-post is done, it will return the message again. Same goes with re-posting to msg-acknowledgement. The server remembers its last state and will return the same results. If you look at the URLs you'll see that they contain information about the expected current state of the server. This is how the server knows what the client is expecting.

Recovering From Client or Server Crashes

If the server crashes and while you are doing a POST to the msg-acknowledge-next URL, just re-post. Everything should reconnect all right. On the other hand, if the server crashes while you are doing a POST tomsg-acknowledgement, the server will return a 412 (Preconditions Failed) response code. This is telling you that the URL you are using is out of sync with the server and the message you are acknowledging was probably re-enqueued. The response will contain a new msg-acknowledge-next header to invoke on.

As long as you have "bookmarked" the consumer resource URL (returned from Location header on a create, or the msg-consumer header), you can recover from client crashes by doing a GET or HEAD request on the consumer resource to obtain what state you are in. If the consumer resource is expecting you to acknowledge a message, it will return a msg-acknowledgement header in the response. If the consumer resource is expecting you to pull for the next message, the msg-acknowledge-next header will be in the response. With manual acknowledgement you are pretty much guaranteed to avoid skipped messages. For topic subscriptions that were created with a name parameter, you do not have to "bookmark" the returned URL. Instead, you can re-create the consumer resource with the same exact name. The response will contain the same information as if you did a GET or HEAD request on the consumer resource.

Blocking Pulls with Accept-Wait

Unless your queue or topic has a high rate of message flowing though it, if you use the pull protocol, you're going to be receiving a lot of 503 responses as you continuously pull the server for new messages. To alleviate this problem, the ActiveMQ REST interface provides the Accept-Wait header. This is a generic HTTP request header that is a hint to the server for how long the client is willing to wait for a response from the server. The value of this header is the time in seconds the client is willing to block for. You would send this request header with your pull requests. Here's an example:

POST /queues/jms.queue.bar/pull-consumers/consume-next-2
Host: example.com
Accept-Wait: 30

--- Response ---
HTTP/1.1 200 Ok
Content-Type: application/xml
msg-consume-next: http://example.com/queues/jms.queue.bar/pull-consumers/333/consume-next-3

<order>...</order>

In this example, we're posting to a msg-consume-next URL and telling the server that we would be willing to block for 30 seconds.

Clean Up Your Consumers!

When the client is done with its consumer or topic subscription it should do an HTTP DELETE call on the consumer URL passed back from the Location header or the msg-consumer response header. The server will time out a consumer with the value of consumer-session-timeout-seconds configured from REST configuration, so you don't have to clean up if you don't want to, but if you are a good kid, you will clean up your messes. A consumer timeout for durable subscriptions will not delete the underlying durable JMS subscription though, only the server-side consumer resource (and underlying JMS session).

Pushing Messages

You can configure the ActiveMQ REST server to push messages to a registered URL either remotely through the REST interface, or by creating a pre-configured XML file for the ActiveMQ REST server to load at boot time.

The Queue Push Subscription XML

Creating a push consumer for a queue first involves creating a very simple XML document. This document tells the server if the push subscription should survive server reboots (is it durable). It must provide a URL to ship the forwarded message to. Finally, you have to provide authentication information if the final endpoint requires authentication. Here's a simple example:

<push-registration>
   <durable>false</durable>
   <selector><![CDATA[
   SomeAttribute > 1
   ]]>
   </selector>
   <link rel="push" href="http://somewhere.com" type="application/json" method="PUT"/>
   <maxRetries>5</maxRetries>
   <retryWaitMillis>1000</retryWaitMillis>
   <disableOnFailure>true</disableOnFailure>
</push-registration>

The durable element specifies whether the registration should be saved to disk so that if there is a server restart, the push subscription will still work. This element is not required. If left out it defaults tofalse. If durable is set to true, an XML file for the push subscription will be created within the directory specified by the queue-push-store-dir config variable defined in Chapter 2 (topic-push-store-dir for topics).

The selector element is optional and defines a JMS message selector. You should enclose it within CDATA blocks as some of the selector characters are illegal XML.

The maxRetries element specifies how many times a the server will try to push a message to a URL if there is a connection failure.

The retryWaitMillis element specifies how long to wait before performing a retry.

The disableOnFailure element, if set to true, will disable the registration if all retries have failed. It will not disable the connection on non-connection-failure issues (like a bad request for instance). In these cases, the dead letter queue logic of ActiveMQ will take over.

The link element specifies the basis of the interaction. The href attribute contains the URL you want to interact with. It is the only required attribute. The type attribute specifies the content-type of what the push URL is expecting. The method attribute defines what HTTP method the server will use when it sends the message to the server. If it is not provided it defaults to POST. The rel attribute is very important and the value of it triggers different behavior. Here's the values a rel attribute can have:

  • destination. The href URL is assumed to be a queue or topic resource of another ActiveMQ REST server. The push registration will initially do a HEAD request to this URL to obtain a msg-create-with-id header. It will use this header to push new messages to the ActiveMQ REST endpoint reliably. Here's an example:

    <push-registration>
       <link rel="destination" href="http://somewhere.com/queues/jms.queue.foo"/>
    </push-registration>
    
  • template. In this case, the server is expecting the link element's href attribute to be a URL expression. The URL expression must have one and only one URL parameter within it. The server will use a unique value to create the endpoint URL. Here's an example:

    <push-registration>
       <link rel="template" href="http://somewhere.com/resources/{id}/messages" method="PUT"/>
    </push-registration>
    

    In this example, the {id} sub-string is the one and only one URL parameter.

  • user defined. If the rel attributes is not destination or template (or is empty or missing), then the server will send an HTTP message to the href URL using the HTTP method defined in the method attribute. Here's an example:

    <push-registration>
       <link href="http://somewhere.com" type="application/json" method="PUT"/>
    </push-registration>
    

The Topic Push Subscription XML

The push XML for a topic is the same except the root element is push-topic-registration. (Also remember the selector element is optional). The rest of the document is the same. Here's an example of a template registration:

<push-topic-registration>
   <durable>true</durable>
   <selector><![CDATA[
   SomeAttribute > 1
   ]]>
   </selector>
   <link rel="template" href="http://somewhere.com/resources/{id}/messages" method="POST"/>
</push-topic registration>

Creating a Push Subscription at Runtime

Creating a push subscription at runtime involves getting the factory resource URL from the msg-push-consumers header, if the destination is a queue, or msg-push-subscriptions header, if the destination is a topic. Here's an example of creating a push registration for a queue:

  1. First do a HEAD request to the queue resource:

    HEAD /queues/jms.queue.bar HTTP/1.1
    Host: example.com
    
    --- Response ---
    HTTP/1.1 200 Ok
    msg-create: http://example.com/queues/jms.queue.bar/create
    msg-pull-consumers: http://example.com/queues/jms.queue.bar/pull-consumers
    msg-push-consumers: http://example.com/queues/jms.queue.bar/push-consumers
    
  2. Next POST your subscription XML to the URL returned from msg-push-consumers header

    POST /queues/jms.queue.bar/push-consumers
    Host: example.com
    Content-Type: application/xml
    
    <push-registration>
       <link rel="destination" href="http://somewhere.com/queues/jms.queue.foo"/>
    </push-registration>
    
    --- Response ---
    HTTP/1.1 201 Created
    Location: http://example.com/queues/jms.queue.bar/push-consumers/1-333-1212
    

    The Location header contains the URL for the created resource. If you want to unregister this, then do a HTTP DELETE on this URL.

Here's an example of creating a push registration for a topic:

  1. First do a HEAD request to the topic resource:

    HEAD /topics/jms.topic.bar HTTP/1.1
    Host: example.com
    
    --- Response ---
    HTTP/1.1 200 Ok
    msg-create: http://example.com/topics/jms.topic.bar/create
    msg-pull-subscriptions: http://example.com/topics/jms.topic.bar/pull-subscriptions
    msg-push-subscriptions: http://example.com/topics/jms.topic.bar/push-subscriptions
    
  2. Next POST your subscription XML to the URL returned from msg-push-subscriptions header

    POST /topics/jms.topic.bar/push-subscriptions
    Host: example.com
    Content-Type: application/xml
    
    <push-registration>
       <link rel="template" href="http://somewhere.com/resources/{id}"/>
    </push-registration>
    
    --- Response ---
    HTTP/1.1 201 Created
    Location: http://example.com/topics/jms.topic.bar/push-subscriptions/1-333-1212
    

    The Location header contains the URL for the created resource. If you want to unregister this, then do a HTTP DELETE on this URL.

Creating a Push Subscription by Hand

You can create a push XML file yourself if you do not want to go through the REST interface to create a push subscription. There is some additional information you need to provide though. First, in the root element, you must define a unique id attribute. You must also define a destination element to specify the queue you should register a consumer with. For a topic, the destination element is the name of the subscription that will be created. For a topic, you must also specify the topic name within the topic element.

Here's an example of a hand-created queue registration. This file must go in the directory specified by the queue-push-store-dir config variable defined in Chapter 2:

<push-registration id="111">
   <destination>jms.queue.bar</destination>
   <durable>true</durable>
   <link rel="template" href="http://somewhere.com/resources/{id}/messages" method="PUT"/>
</push-registration>

Here's an example of a hand-created topic registration. This file must go in the directory specified by the topic-push-store-dir config variable defined in Chapter 2:

<push-topic-registration id="112">
   <destination>my-subscription-1</destination
   <durable>true</durable>
   <link rel="template" href="http://somewhere.com/resources/{id}/messages" method="PUT"/>
   <topic>jms.topic.foo</topic>
</push-topic-registration>

Pushing to Authenticated Servers

Push subscriptions only support BASIC and DIGEST authentication out of the box. Here is an example of adding BASIC authentication:

<push-topic-registration>
   <durable>true</durable>
   <link rel="template" href="http://somewhere.com/resources/{id}/messages" method="POST"/>
   <authentication>
      <basic-auth>
         <username>guest</username>
         <password>geheim</password>
      </basic-auth>
   </authentication>
</push-topic registration>

For DIGEST, just replace basic-auth with digest-auth.

For other authentication mechanisms, you can register headers you want transmitted with each request. Use the header element with the name attribute representing the name of the header. Here's what custom headers might look like:

<push-topic-registration>
   <durable>true</durable>
   <link rel="template" href="http://somewhere.com/resources/{id}/messages" method="POST"/>
   <header name="secret-header">jfdiwe3321</header>
</push-topic registration>

Creating Destinations

You can create a durable queue or topic through the REST interface. Currently you cannot create a temporary queue or topic. To create a queue you do a POST to the relative URL /queues with an XML representation of the queue. The XML syntax is the same queue syntax that you would specify in activemq-jms.xml if you were creating a queue there. For example:

POST /queues
Host: example.com
Content-Type: application/activemq.jms.queue+xml

<queue name="testQueue">
   <durable>true</durable>
</queue>

--- Response ---
HTTP/1.1 201 Created
Location: http://example.com/queues/jms.queue.testQueue

Notice that the Content-Type is application/activemq.jms.queue+xml.

Here's what creating a topic would look like:

POST /topics
Host: example.com
Content-Type: application/activemq.jms.topic+xml

<topic name="testTopic">
</topic>

--- Response ---
HTTP/1.1 201 Created
Location: http://example.com/topics/jms.topic.testTopic

Securing the ActiveMQ REST Interface

Within JBoss Application server

Securing the ActiveMQ REST interface is very simple with the JBoss Application Server. You turn on authentication for all URLs within your WAR's web.xml, and let the user Principal to propagate to ActiveMQ. This only works if you are using the JBossSecurityManager with ActiveMQ. See the ActiveMQ documentation for more details.

Security in other environments

To secure the ActiveMQ REST interface in other environments you must role your own security by specifying security constraints with your web.xml for every path of every queue and topic you have deployed. Here is a list of URI patterns:


/queues secure the POST operation to secure queue creation /queues/{queue-name} secure the GET HEAD operation to getting information about the queue. /queues/{queue-name}/create/* secure this URL pattern for producing messages. /queues/{queue-name}/pull-consumers/* secure this URL pattern for pulling messages. /queues/{queue-name}/push-consumers/* secure this URL pattern for pushing messages. /topics secure the POST operation to secure topic creation /topics/{topic-name} secure the GET HEAD operation to getting information about the topic. /topics/{topic-name}/create/* secure this URL pattern for producing messages. /topics/{topic-name}/pull-subscriptions/* secure this URL pattern for pulling messages. /topics/{topic-name}/push-subscriptions/* secure this URL pattern for pushing messages.


Mixing JMS and REST

The ActiveMQ REST interface supports mixing JMS and REST producers and consumers. You can send an ObjectMessage through a JMS Producer, and have a REST client consume it. You can have a REST client POST a message to a topic and have a JMS Consumer receive it. Some simple transformations are supported if you have the correct RESTEasy providers installed.

JMS Producers - REST Consumers

If you have a JMS producer, the ActiveMQ REST interface only supports ObjectMessage type. If the JMS producer is aware that there may be REST consumers, it should set a JMS property to specify what Content-Type the Java object should be translated into by REST clients. The ActiveMQ REST server will use RESTEasy content handlers (MessageBodyReader/Writers) to transform the Java object to the type desired. Here's an example of a JMS producer setting the content type of the message.

ObjectMessage message = session.createObjectMessage();
message.setStringProperty(org.apache.activemq.rest.HttpHeaderProperty.CONTENT_TYPE, "application/xml");

If the JMS producer does not set the content-type, then this information must be obtained from the REST consumer. If it is a pull consumer, then the REST client should send an Accept header with the desired media types it wants to convert the Java object into. If the REST client is a push registration, then the type attribute of the link element of the push registration should be set to the desired type.

REST Producers - JMS Consumers

If you have a REST client producing messages and a JMS consumer, ActiveMQ REST has a simple helper class for you to transform the HTTP body to a Java object. Here's some example code:

public void onMessage(Message message)
{
   MyType obj = org.apache.activemq.rest.Jms.getEntity(message, MyType.class);
}

The way the getEntity() method works is that if the message is an ObjectMessage, it will try to extract the desired type from it like any other JMS message. If a REST producer sent the message, then the method uses RESTEasy to convert the HTTP body to the Java object you want. See the Javadoc of this class for more helper methods.