27 KiB
27 KiB
Configuration Reference
This section is a quick index for looking up configuration. Click on the element name to go to the specific chapter.
Server Configuration
broker.xml
This is the main core server configuration file which contains the 'core' element. The 'core' element contains the main server configuration.
System properties
It is possible to use System properties to replace some of the configuration properties. If you define a System property starting with "brokerconfig." that will be passed along to Bean Utils and the configuration would be replaced.
To define global-max-size=1000000 using a system property you would have to define this property, for example through java arguments:
java -Dbrokerconfig.globalMaxSize=1000000
You can also change the prefix through the broker.xml by setting:
<system-property-prefix>yourprefix</system-property-prefix>
This is to help you customize artemis on embedded systems.
The core configuration
This describes the root of the XML configuration. You will see here also multiple sub-types listed. For example on the main config you will have bridges and at the list of bridge type we will describe the properties for that configuration.
| Name | Description |
|---|---|
| acceptors | a list of remoting acceptors |
| acceptors.acceptor | Each acceptor is composed for just an URL |
| address-settings | a list of address-setting |
| allow-failback | Should stop backup on live restart. default true |
| amqp-use-core-subscription-naming | If true uses CORE queue naming convention for AMQP. default false |
| async-connection-execution-enabled | If False delivery would be always asynchronous. default true |
| bindings-directory | The folder in use for the bindings folder |
| bridges | a list of bridge |
| broadcast-groups | a list of broadcast-group |
| configuration-file-refresh-period | The frequency in milliseconds the configuration file is checked for changes (default 5000) |
| check-for-live-server | Used for a live server to verify if there are other nodes with the same ID on the topology |
| cluster-connections | a list of cluster-connection |
| cluster-password | Cluster password. It applies to all cluster configurations. |
| cluster-user | Cluster username. It applies to all cluster configurations. |
| connection-ttl-override | if set, this will override how long (in ms) to keep a connection alive without receiving a ping. -1 disables this setting. Default -1 |
| connection-ttl-check-period | how often (in ms) to check connections for ttl violation. Default 2000 |
| connectors.connector | The URL for the connector. This is a list |
| create-bindings-dir | true means that the server will create the bindings directory on start up. Default=true |
| create-journal-dir | true means that the journal directory will be created. Default=true |
| discovery-groups | a list of discovery-group |
| disk-scan-period | The interval where the disk is scanned for percentual usage. Default=5000 ms. |
| diverts | a list of diverts to use |
| global-max-size | The amount in bytes before all addresses are considered full. Default is half of the memory used by the JVM (-Xmx argument). |
| graceful-shutdown-enabled | true means that graceful shutdown is enabled. Default=true |
| graceful-shutdown-timeout | Timeout on waitin for clients to disconnect before server shutdown. Default=-1 |
| grouping-handler | Message Group configuration |
| id-cache-size | The duplicate detection circular cache size. Default=20000 |
| jmx-domain | the JMX domain used to registered MBeans in the MBeanServer. Default=org.apache.activemq |
| jmx-management-enabled | true means that the management API is available via JMX. Default=true |
| journal-buffer-size | The size of the internal buffer on the journal in KB. Default=490 KiB |
| journal-buffer-timeout | The Flush timeout for the journal buffer |
| journal-compact-min-files | The minimal number of data files before we can start compacting. Setting this to 0 means compacting is disabled. Default=10 |
| journal-compact-percentage | The percentage of live data on which we consider compacting the journal. Default=30 |
| journal-directory | the directory to store the journal files in. Default=data/journal |
| journal-file-size | the size (in bytes) of each journal file. Default=10485760 (10 MB) |
| journal-max-io | the maximum number of write requests that can be in the AIO queue at any one time. Default is 4096 for AIO and 1 for NIO, ignored for MAPPED. |
| journal-min-files | how many journal files to pre-create. Default=2 |
| journal-pool-files | The upper theshold of the journal file pool,-1 (default) means no Limit. The system will create as many files as needed however when reclaiming files it will shrink back to the journal-pool-files |
| journal-sync-non-transactional | if true wait for non transaction data to be synced to the journal before returning response to client. Default=true |
| journal-sync-transactional | if true wait for transaction data to be synchronized to the journal before returning response to client. Default=true |
| journal-type | the type of journal to use. Default=ASYNCIO |
| journal-datasync | It will use msync/fsync on journal operations. Default=true. |
| large-messages-directory | the directory to store large messages. Default=data/largemessages |
| management-address | the name of the management address to send management messages to. Default=activemq.management |
| management-notification-address | the name of the address that consumers bind to receive management notifications. Default=activemq.notifications |
| mask-password | This option controls whether passwords in server configuration need be masked. If set to "true" the passwords are masked. Default=false |
| max-saved-replicated-journals-size | This specifies how many times a replicated backup server can restart after moving its files on start. Once there are this number of backup journal files the server will stop permanently after if fails back. -1 Means no Limit, 0 don't keep a copy at all, Default=2 |
| max-disk-usage | The max percentage of data we should use from disks. The System will block while the disk is full. Default=100 |
| memory-measure-interval | frequency to sample JVM memory in ms (or -1 to disable memory sampling). Default=-1 |
| memory-warning-threshold | Percentage of available memory which will trigger a warning log. Default=25 |
| message-counter-enabled | true means that message counters are enabled. Default=false |
| message-counter-max-day-history | how many days to keep message counter history. Default=10 (days) |
| message-counter-sample-period | the sample period (in ms) to use for message counters. Default=10000 |
| message-expiry-scan-period | how often (in ms) to scan for expired messages. Default=30000 |
| message-expiry-thread-priority | the priority of the thread expiring messages. Default=3 |
| password-codec | the name of the class (and optional configuration properties) used to decode masked passwords. Only valid when mask-password is true. Default=empty |
| page-max-concurrent-io | The max number of concurrent reads allowed on paging. Default=5 |
| paging-directory | the directory to store paged messages in. Default=data/paging |
| persist-delivery-count-before-delivery | True means that the delivery count is persisted before delivery. False means that this only happens after a message has been cancelled. Default=false |
| persistence-enabled | true means that the server will use the file based journal for persistence. Default=true |
| persist-id-cache | true means that ID's are persisted to the journal. Default=true |
| queues | a list of queue to be created |
| remoting-incoming-interceptors | A list of interceptor |
| resolveProtocols | Use ServiceLoader to load protocol modules. Default=true |
| scheduled-thread-pool-max-size | Maximum number of threads to use for the scheduled thread pool. Default=5 |
| security-enabled | true means that security is enabled. Default=true |
| security-invalidation-interval | how long (in ms) to wait before invalidating the security cache. Default=10000 |
| system-property-prefix | Prefix for replacing configuration settings using Bean Utils. |
| populate-validated-user | whether or not to add the name of the validated user to the messages that user sends. Default=false |
| security-settings | a list of security-setting |
| thread-pool-max-size | Maximum number of threads to use for the thread pool. -1 means 'no limits'.. Default=30 |
| transaction-timeout | how long (in ms) before a transaction can be removed from the resource manager after create time. Default=300000 |
| transaction-timeout-scan-period | how often (in ms) to scan for timeout transactions. Default=1000 |
| wild-card-routing-enabled | true means that the server supports wild card routing. Default=true |
| network-check-NIC | The NIC (Network Interface Controller) to be used on InetAddress.isReacheable |
| network-check-URL | The list of http URIs to be used to validate the network |
| network-check-list | The list of pings to be used on ping or InetAddress.isReacheable |
| network-check-ping-command | The command used to oping IPV4 addresses |
| network-check-ping6-command | The command used to oping IPV6 addresses |
| critical-analyzer | Enable or disable the critical analysis (default true) |
| critical-analyzer-timeout | Timeout used to do the critical analysis (default 120000 milliseconds) |
| critical-analyzer-check-period | Time used to check the response times (default half of critical-analyzer-timeout) |
| critical-analyzer-policy | Should the server log, be halted or shutdown upon failures (default LOG) |
#address-setting type
| Name | Description |
|---|---|
| match | The filter to apply to the setting |
| dead-letter-address | dead letter address |
| expiry-address | expired messages address |
| expiry-delay | expiration time override, -1 don't override with default=-1 |
| redelivery-delay | time to redeliver a message (in ms) with default=0 |
| redelivery-delay-multiplier | multiplier to apply to the "redelivery-delay" |
| max-redelivery-delay | Max value for the redelivery-delay |
| max-delivery-attempts | Number of retries before dead letter address, default=10 |
| max-size-bytes | Limit before paging. -1 = infinite |
| page-size-bytes | Size of each file on page, default=10485760 |
| page-max-cache-size | Maximum number of files cached from paging default=5 |
| address-full-policy | Model to chose after queue full |
| message-counter-history-day-limit | Days to keep in history |
| last-value-queue | Queue is a last value queue, default=false |
| redistribution-delay | Timeout before redistributing values after no consumers. default=-1 |
| send-to-dla-on-no-route | Forward messages to DLA when no queues subscribing. default=false |
#bridge type
| Name | Description |
|---|---|
| name | unique name |
| queue-name | name of queue that this bridge consumes from |
| forwarding-address | address to forward to. If omitted original address is used |
| ha | whether this bridge supports fail-over |
| filter | optional core filter expression |
| transformer-class-name | optional name of transformer class |
| min-large-message-size | Limit before message is considered large. default 100KB |
| check-period | TTL check period for the bridge. -1 means disabled. default 30000 (ms) |
| connection-ttl | TTL for the Bridge. This should be greater than the ping period. default 60000 (ms) |
| retry-interval | period (in ms) between successive retries. default 2000 |
| retry-interval-multiplier | multiplier to apply to successive retry intervals. default 1 |
| max-retry-interval | Limit to the retry-interval growth. default 2000 |
| reconnect-attempts | maximum number of retry attempts, -1 means 'no limits'. default -1 |
| use-duplicate-detection | forward duplicate detection headers?. default true |
| confirmation-window-size | number of bytes before confirmations are sent. default 1MB |
| producer-window-size | Producer flow control size on the bridge. Default -1 (disabled) |
| user | Username for the bridge, the default is the cluster username |
| password | Password for the bridge, default is the cluster password |
| reconnect-attempts-same-node | Number of retries before trying another node. default 10 |
broadcast-group type
| Name | Type |
|---|---|
| name | unique name |
| local-bind-address | local bind address that the datagram socket is bound to |
| local-bind-port | local port to which the datagram socket is bound to |
| group-address | multicast address to which the data will be broadcast |
| group-port | UDP port number used for broadcasting |
| broadcast-period | period in milliseconds between consecutive broadcasts. default 2000 |
| jgroups-file | Name of JGroups configuration file |
| jgroups-channel | Name of JGroups Channel |
| connector-ref |
#cluster-connection type
| Name | Description |
|---|---|
| name | unique name |
| address | name of the address this cluster connection applies to |
| connector-ref | Name of the connector reference to use. |
| check-period | The period (in milliseconds) used to check if the cluster connection has failed to receive pings from another server with default = 30000 |
| connection-ttl | Timeout for TTL. Default 60000 |
| min-large-message-size | Messages larger than this are considered large-messages, default=100KB |
| call-timeout | Time(ms) before giving up on blocked calls. Default=30000 |
| retry-interval | period (in ms) between successive retries. Default=500 |
| retry-interval-multiplier | multiplier to apply to the retry-interval. Default=1 |
| max-retry-interval | Maximum value for retry-interval. Default=2000 |
| reconnect-attempts | How many attempts should be made to reconnect after failure. Default=-1 |
| use-duplicate-detection | should duplicate detection headers be inserted in forwarded messages?. Default=true |
| message-load-balancing | how should messages be load balanced? Default=OFF |
| max-hops | maximum number of hops cluster topology is propagated. Default=1 |
| confirmation-window-size | The size (in bytes) of the window used for confirming data from the server connected to. Default 1048576 |
| producer-window-size | Flow Control for the Cluster connection bridge. Default -1 (disabled) |
| call-failover-timeout | How long to wait for a reply if in the middle of a fail-over. -1 means wait forever. Default -1 |
| notification-interval | how often the cluster connection will notify the cluster of its existence right after joining the cluster. Default 1000 |
| notification-attempts | how many times this cluster connection will notify the cluster of its existence right after joining the cluster Default 2 |
#discovery-group type
| Name | Description |
|---|---|
| name | unique name |
| group-address | Multicast IP address of the group to listen on |
| group-port | UDP port number of the multi cast group |
| jgroups-file | Name of a JGroups configuration file. If specified, the server uses JGroups for discovery. |
| jgroups-channel | Name of a JGroups Channel. If specified, the server uses the named channel for discovery. |
| refresh-timeout | Period the discovery group waits after receiving the last broadcast from a particular server before removing that servers connector pair entry from its list. Default=10000 |
| local-bind-address | local bind address that the datagram socket is bound to |
| local-bind-port | local port to which the datagram socket is bound to. Default=-1 |
| initial-wait-timeout | time to wait for an initial broadcast to give us at least one node in the cluster. Default=10000 |
#divert type
| Name | Description |
|---|---|
| name | unique name |
| transformer-class-name | an optional class name of a transformer |
| exclusive | whether this is an exclusive divert. Default=false |
| routing-name | the routing name for the divert |
| address | the address this divert will divert from |
| forwarding-address | the forwarding address for the divert |
| filter | optional core filter expression |
#queue type
| Name | Description |
|---|---|
| name | unique name |
| address | address for the queue |
| filter | optional core filter expression |
| durable | whether the queue is durable (persistent). Default=true |
#security-setting type
| Name | Description |
|---|---|
| match | address expression |
| permission | |
| permission.type | the type of permission |
| permission.roles | a comma-separated list of roles to apply the permission to |