6.9 KiB

Raw Blame History

layout
doc_page

Realtime Data Ingestion

For general Real-time Node information, see here.

For Real-time Node Configuration, see Realtime Configuration.

For writing your own plugins to the real-time node, see Firehose.

Much of the configuration governing Realtime nodes and the ingestion of data is set in the Realtime spec file, discussed on this page.

Realtime "specFile"

The property druid.realtime.specFile has the path of a file (absolute or relative path and file name) with realtime specifications in it. This "specFile" should be a JSON Array of JSON objects like the following:

[
  {
    "schema": {
      "dataSource": "dataSourceName",
      "aggregators": [
        {
          "type": "count",
          "name": "events"
        },
        {
          "type": "doubleSum",
          "name": "outColumn",
          "fieldName": "inColumn"
        }
      ],
      "indexGranularity": "minute",
      "shardSpec": {
        "type": "none"
      }
    },
    "config": {
      "maxRowsInMemory": 500000,
      "intermediatePersistPeriod": "PT10m"
    },
    "firehose": {
      "type": "kafka-0.7.2",
      "consumerProps": {
        "zk.connect": "zk_connect_string",
        "zk.connectiontimeout.ms": "15000",
        "zk.sessiontimeout.ms": "15000",
        "zk.synctime.ms": "5000",
        "groupid": "consumer-group",
        "fetch.size": "1048586",
        "autooffset.reset": "largest",
        "autocommit.enable": "false"
      },
      "feed": "your_kafka_topic",
      "parser": {
        "timestampSpec": {
          "column": "timestamp",
          "format": "iso"
        },
        "data": {
          "format": "json"
        },
        "dimensionExclusions": [
          "value"
        ]
      }
    },
    "plumber": {
      "type": "realtime",
      "windowPeriod": "PT10m",
      "segmentGranularity": "hour",
      "basePersistDirectory": "\/tmp\/realtime\/basePersist"
    }
  }
]

This is a JSON Array so you can give more than one realtime stream to a given node. The number you can put in the same process depends on the exact configuration. In general, it is best to think of each realtime stream handler as requiring 2-threads: 1 thread for data consumption and aggregation, 1 thread for incremental persists and other background tasks.

There are four parts to a realtime stream specification, schema, config, firehose and plumber which we will go into here.

Schema

This describes the data schema for the output Druid segment. More information about concepts in Druid and querying can be found at Concepts-and-Terminology and Querying.

Field	Type	Description	Required
aggregators	Array of Objects	The list of aggregators to use to aggregate colliding rows together.	yes
dataSource	String	The name of the dataSource that the segment belongs to.	yes
indexGranularity	String	The granularity of the data inside the segment. E.g. a value of "minute" will mean that data is aggregated at minutely granularity. That is, if there are collisions in the tuple (minute(timestamp), dimensions), then it will aggregate values together using the aggregators instead of storing individual rows.	yes
shardSpec	Object	This describes the shard that is represented by this server. This must be specified properly in order to have multiple realtime nodes indexing the same data stream in a sharded fashion.	no

Config

This provides configuration for the data processing portion of the realtime stream processor.

Field	Type	Description	Required
intermediatePersistPeriod	ISO8601 Period String	The period that determines the rate at which intermediate persists occur. These persists determine how often commits happen against the incoming realtime stream. If the realtime data loading process is interrupted at time T, it should be restarted to re-read data that arrived at T minus this period.	yes
maxRowsInMemory	Number	The number of rows to aggregate before persisting. This number is the post-aggregation rows, so it is not equivalent to the number of input events, but the number of aggregated rows that those events result in. This is used to manage the required JVM heap size.	yes

Firehose

Firehoses describe the data stream source. See Firehose for more information on firehose configuration.

Plumber

The Plumber handles generated segments both while they are being generated and when they are "done". The configuration parameters in the example are:

type specifies the type of plumber in terms of configuration schema. The Plumber configuration in the example is for the often-used RealtimePlumber.
windowPeriod is the amount of lag time to allow events. The example configures a 10 minute window, meaning that any event more than 10 minutes ago will be thrown away and not included in the segment generated by the realtime server.
segmentGranularity specifies the granularity of the segment, or the amount of time a segment will represent.
basePersistDirectory is the directory to put things that need persistence. The plumber is responsible for the actual intermediate persists and this tells it where to store those persists.
rejectionPolicy determines what events are rejected upon ingestion.

See Plumber for a fuller discussion of Plumber configuration.

Constraints

The following table summarizes constraints between settings in the spec file for the Realtime subsystem.

Name	Effect	Minimum	Recommended
windowPeriod	when reading an InputRow, events with timestamp older than now minus this window are discarded	time jitter tolerance	use this to reject outliers
segmentGranularity	time granularity (minute, hour, day, week, month) for loading data at query time	equal to indexGranularity	more than indexGranularity
indexGranularity	time granularity (minute, hour, day, week, month) of indexes	less than segmentGranularity	minute, hour, day, week, month
intermediatePersistPeriod	the max real time (ISO8601 Period) between flushes of InputRows from memory to disk	avoid excessive flushing	number of un-persisted rows in memory also constrained by maxRowsInMemory
maxRowsInMemory	the max number of InputRows to hold in memory before a flush to disk	number of un-persisted post-aggregation rows in memory is also constrained by intermediatePersistPeriod	use this to avoid running out of heap if too many rows in an intermediatePersistPeriod

The normal, expected use cases have the following overall constraints: indexGranularity < intermediatePersistPeriod =< windowPeriod < segmentGranularity

If the Realtime Node process runs out of heap, try adjusting druid.computation.buffer.size property which specifies a size in bytes that must fit into the heap.

6.9 KiB Raw Blame History