druid/docs/querying/sql-syntax.md

id	title	sidebar_label
sql-syntax	SQL query syntax	SQL query syntax

Apache Druid supports two query languages: Druid SQL and native queries. This document describes the SQL language.

Druid SQL supports SELECT queries with the following structure:

[ EXPLAIN PLAN FOR ]
[ WITH tableName [ ( column1, column2, ... ) ] AS ( query ) ]
SELECT [ ALL | DISTINCT ] { * | exprs }
FROM { <table> | (<subquery>) | <o1> [ INNER | LEFT ] JOIN <o2> ON condition }
[ WHERE expr ]
[ GROUP BY [ exprs | GROUPING SETS ( (exprs), ... ) | ROLLUP (exprs) | CUBE (exprs) ] ]
[ HAVING expr ]
[ ORDER BY expr [ ASC | DESC ], expr [ ASC | DESC ], ... ]
[ LIMIT limit ]
[ OFFSET offset ]
[ UNION ALL <another query> ]

FROM

The FROM clause can refer to any of the following:

• Table datasources from the druid schema. This is the default schema, so Druid table datasources can be referenced as either druid.dataSourceName or simply dataSourceName.
• Lookups from the lookup schema, for example lookup.countries. Note that lookups can also be queried using the LOOKUP function.
• Subqueries.
• Joins between anything in this list, except between native datasources (table, lookup, query) and system tables. The join condition must be an equality between expressions from the left- and right-hand side of the join.
• Metadata tables from the INFORMATION_SCHEMA or sys schemas. Unlike the other options for the FROM clause, metadata tables are not considered datasources. They exist only in the SQL layer.

For more information about table, lookup, query, and join datasources, refer to the Datasources documentation.

WHERE

The WHERE clause refers to columns in the FROM table, and will be translated to native filters. The WHERE clause can also reference a subquery, like WHERE col1 IN (SELECT foo FROM ...). Queries like this are executed as a join on the subquery, described in the Query translation section.

Strings and numbers can be compared in the WHERE clause of a SQL query through implicit type conversion. For example, you can evaluate WHERE stringDim = 1 for a string-typed dimension named stringDim. However, for optimal performance, you should explicitly cast the reference number as a string when comparing against a string dimension:

WHERE stringDim = '1'

Similarly, if you compare a string-typed dimension with reference to an array of numbers, cast the numbers to strings:

WHERE stringDim IN ('1', '2', '3')

Note that explicit type casting does not lead to significant performance improvement when comparing strings and numbers involving numeric dimensions since numeric dimensions are not indexed.

GROUP BY

The GROUP BY clause refers to columns in the FROM table. Using GROUP BY, DISTINCT, or any aggregation functions will trigger an aggregation query using one of Druid's three native aggregation query types. GROUP BY can refer to an expression or a select clause ordinal position (like GROUP BY 2 to group by the second selected column).

The GROUP BY clause can also refer to multiple grouping sets in three ways. The most flexible is GROUP BY GROUPING SETS, for example GROUP BY GROUPING SETS ( (country, city), () ). This example is equivalent to a GROUP BY country, city followed by GROUP BY () (a grand total). With GROUPING SETS, the underlying data is only scanned one time, leading to better efficiency. Second, GROUP BY ROLLUP computes a grouping set for each level of the grouping expressions. For example GROUP BY ROLLUP (country, city) is equivalent to GROUP BY GROUPING SETS ( (country, city), (country), () ) and will produce grouped rows for each country / city pair, along with subtotals for each country, along with a grand total. Finally, GROUP BY CUBE computes a grouping set for each combination of grouping expressions. For example, GROUP BY CUBE (country, city) is equivalent to GROUP BY GROUPING SETS ( (country, city), (country), (city), () ).

Grouping columns that do not apply to a particular row will contain NULL. For example, when computing GROUP BY GROUPING SETS ( (country, city), () ), the grand total row corresponding to () will have NULL for the "country" and "city" columns. Column may also be NULL if it was NULL in the data itself. To differentiate such rows, you can use GROUPING aggregation.

When using GROUP BY GROUPING SETS, GROUP BY ROLLUP, or GROUP BY CUBE, be aware that results may not be generated in the order that you specify your grouping sets in the query. If you need results to be generated in a particular order, use the ORDER BY clause.

HAVING

The HAVING clause refers to columns that are present after execution of GROUP BY. It can be used to filter on either grouping expressions or aggregated values. It can only be used together with GROUP BY.

ORDER BY

The ORDER BY clause refers to columns that are present after execution of GROUP BY. It can be used to order the results based on either grouping expressions or aggregated values. ORDER BY can refer to an expression or a select clause ordinal position (like ORDER BY 2 to order by the second selected column). For non-aggregation queries, ORDER BY can only order by the __time column. For aggregation queries, ORDER BY can order by any column.

LIMIT

The LIMIT clause limits the number of rows returned. In some situations Druid will push down this limit to data servers, which boosts performance. Limits are always pushed down for queries that run with the native Scan or TopN query types. With the native GroupBy query type, it is pushed down when ordering on a column that you are grouping by. If you notice that adding a limit doesn't change performance very much, then it's possible that Druid wasn't able to push down the limit for your query.

OFFSET

The OFFSET clause skips a certain number of rows when returning results.

If both LIMIT and OFFSET are provided, then OFFSET will be applied first, followed by LIMIT. For example, using LIMIT 100 OFFSET 10 will return 100 rows, starting from row number 10.

Together, LIMIT and OFFSET can be used to implement pagination. However, note that if the underlying datasource is modified between page fetches, then the different pages will not necessarily align with each other.

There are two important factors that can affect the performance of queries that use OFFSET:

• Skipped rows still need to be generated internally and then discarded, meaning that raising offsets to high values can cause queries to use additional resources.
• OFFSET is only supported by the Scan and GroupBy native query types. Therefore, a query with OFFSET will use one of those two types, even if it might otherwise have run as a Timeseries or TopN. Switching query engines in this way can affect performance.

UNION ALL

The "UNION ALL" operator fuses multiple queries together. Druid SQL supports the UNION ALL operator in two situations: top-level and table-level. Queries that use UNION ALL in any other way will not be able to execute.

Top-level

UNION ALL can be used at the very top outer layer of a SQL query (not in a subquery, and not in the FROM clause). In this case, the underlying queries will be run separately, back to back. Their results will be concatenated together and appear one after the other.

For example:

SELECT COUNT(*) FROM tbl WHERE my_column = 'value1'
UNION ALL
SELECT COUNT(*) FROM tbl WHERE my_column = 'value2'

With top-level UNION ALL, no further processing can be done after the UNION ALL. For example, the results of the UNION ALL cannot have GROUP BY, ORDER BY, or any other operators applied to them.

Table-level

UNION ALL can be used to query multiple tables at the same time. In this case, it must appear in a subquery in the FROM clause, and the lower-level subqueries that are inputs to the UNION ALL operator must be simple table SELECTs. Features like expressions, column aliasing, JOIN, GROUP BY, ORDER BY, and so on cannot be used. The query will run natively using a union datasource.

The same columns must be selected from each table in the same order, and those columns must either have the same types, or types that can be implicitly cast to each other (such as different numeric types). For this reason, it is generally more robust to write your queries to select specific columns. If you use SELECT *, you will need to modify your queries if a new column is added to one of the tables but not to the others.

For example:

SELECT col1, COUNT(*)
FROM (
  SELECT col1, col2, col3 FROM tbl1
  UNION ALL
  SELECT col1, col2, col3 FROM tbl2
)
GROUP BY col1

With table-level UNION ALL, the rows from the unioned tables are not guaranteed to be processed in any particular order. They may be processed in an interleaved fashion. If you need a particular result ordering, use ORDER BY on the outer query.

EXPLAIN PLAN

Add "EXPLAIN PLAN FOR" to the beginning of any query to get information about how it will be translated. In this case, the query will not actually be executed. Refer to the Query translation documentation for more information on the output of EXPLAIN PLAN.

Be careful when interpreting EXPLAIN PLAN output, and use request logging if in doubt. Request logs show the exact native query that will be run.

Identifiers and literals

Identifiers like datasource and column names can optionally be quoted using double quotes. To escape a double quote inside an identifier, use another double quote, like "My ""very own"" identifier". All identifiers are case-sensitive and no implicit case conversions are performed.

Literal strings should be quoted with single quotes, like 'foo'. Literal strings with Unicode escapes can be written like U&'fo\00F6', where character codes in hex are prefixed by a backslash. Literal numbers can be written in forms like 100 (denoting an integer), 100.0 (denoting a floating point value), or 1.0e5 (scientific notation). Literal timestamps can be written like TIMESTAMP '2000-01-01 00:00:00'. Literal intervals, used for time arithmetic, can be written like INTERVAL '1' HOUR, INTERVAL '1 02:03' DAY TO MINUTE, INTERVAL '1-2' YEAR TO MONTH, and so on.

Dynamic parameters

Druid SQL supports dynamic parameters using question mark (?) syntax, where parameters are bound to ? placeholders at execution time. To use dynamic parameters, replace any literal in the query with a ? character and provide a corresponding parameter value when you execute the query. Parameters are bound to the placeholders in the order in which they are passed. Parameters are supported in both the HTTP POST and JDBC APIs.

In certain cases, using dynamic parameters in expressions can cause type inference issues which cause your query to fail, for example:

SELECT * FROM druid.foo WHERE dim1 like CONCAT('%', ?, '%')

To solve this issue, explicitly provide the type of the dynamic parameter using the CAST keyword. Consider the fix for the preceding example:

SELECT * FROM druid.foo WHERE dim1 like CONCAT('%', CAST (? AS VARCHAR), '%')