o If the metadata version is still in the plugin artifact after it's resolved, then simply return null and allow the plugin version resolution process to fail.
o Added a new mojo to update the plugin registry (if it's enabled) with newly installed versions of plugins.
o Added comments to maven-settings and maven-plugin-parameter-documenter poms marking the packageWithVersion config as deprecated pending modello alpha-5
o Cleaned up it0013 and it0020 to work with the new resolution (point one above).
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@293520 13f79535-47bb-0310-9956-ffa450edef68
attempt to move toward true embeddability.
- System properties are still populated in the CLI to make sure that the
system property profile activator functions and the settings are dealt with
correctly. I will look at each of those shortly but this is a first step.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@293504 13f79535-47bb-0310-9956-ffa450edef68
o Added pluginManagement injection to MavenProject.addPlugin(..) so that no Plugin definition added to the project can go without having managed info injected into it.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@293454 13f79535-47bb-0310-9956-ffa450edef68
o aggregating goal that forks a lifecycle should run reactor over projects
o don't show reactor summary if an aggregation goal was run that didn't fork a lifecycle.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@293235 13f79535-47bb-0310-9956-ffa450edef68
o Improved the error diagnostics related to artifact resolution errors.
o Added xml-based documentation of supported plugin parameter expressions, including info about how to affect them ('-o' for example), how to specify them (<distributionManagement><repository/> for example in ${project.distributionManagementArtifactRepository}), and what the expressions are actually used for. This can also serve as a basis for creating documentation for plugin parameter expressions on the website.
o Improved the error diagnostics for plugin configuration errors.
o Added a couple of ITs in the 1000 series to test these two error conditions.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@292750 13f79535-47bb-0310-9956-ffa450edef68
o Extracting basedir from the project instance when PluginParameterExpressionEvaluator is init'ed if project != null...otherwise, using ${user.dir} from sysprops.
o Extracting values for resolution from POM properties before POM instance during POM interpolation, and adding checks to guard against self-reference of POM elements.
o Added three ITs (one contra) to test these resolutions.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@291735 13f79535-47bb-0310-9956-ffa450edef68
as a parameter. this method is currently being used in the embedder
o see MNG-1015 for notes on where the monitor may be bested placed. if
everything eventually uses the embedder then it won't matter so much.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@291499 13f79535-47bb-0310-9956-ffa450edef68
o We should have a viable offline mode now. Plugin sensitivity updates to follow.
o See it0069 and it1014 for offline mode tests.
o Brett, building maven-plugins in offline mode with org/apache/maven/plugin/* removed will now give a nice error message. :)
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@291124 13f79535-47bb-0310-9956-ffa450edef68
o Fixed DefaultMaven to use the release-pom.xml for MavenProjects loaded via <modules/> if the parent project is loaded from release-pom.xml
o Adjusted tests to have dependencyManagement.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@290539 13f79535-47bb-0310-9956-ffa450edef68
currently executing plugin, so that both getClass().getClassLoader()
and Thread.currentThread().getContextClassLoader() return the same
classloader (and hence resources).
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@290040 13f79535-47bb-0310-9956-ffa450edef68
o Added it0068 to guard against regressions of the type causing MNG-836
o Added it2001, which must be run manually, to verify the test case laid out in MNG-757
o Reinstated the repository accumulation for successive traversal down the transitivity chain, so that transitively resolved artifacts can be found in repositories declared by POMs up the chain.
o Added a check for 'file:' at the beginning of the Settings.getLocalRepository() result, before prepending 'file://' to allow for relative definition of the local repository in test cases
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@280755 13f79535-47bb-0310-9956-ffa450edef68
1.0-alpha-5-SNAPSHOT for all so they're all the same.
o Updated modello plugin invocations in all poms to by adding execution elements
and fixing goals section to get rid of deprecated notation.
o Removed dependency on modello-core in maven-plugin-tools; it seems it
was there because maven-plugin-tools-java used StringUtils from modello -
changed that to use the plexus-utils version.
o Reversed commons-cli version back to 1.0 (brett asked me to, a few days back).
o Updated all models to use fully qualified classnames - do not assume
java.util.* is included! (it won't be anymore from modello
1.0-alpha-5-SNAPSHOT onward).
o Added some <?xml processing instructions to some models that didn't have them
- vim now recognizes these files as XML (so I get syntax highlighting :))
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@280539 13f79535-47bb-0310-9956-ffa450edef68
an 'id' to use MavenProject instead.
In some parts of the code a DAG is constructed using a version-less key,
and in the api what the id should be is unspecified.
This could result in NPE's (it does!) because the code in plexus-utils
assumes a known id (vertex in the DAG) is supplied.
So, moved the project.getId() calls outside of ReactorManager into the
ReactorManager, so that there's just one place where the decision is made on
how to generate an id (DAG vertex label) from a project. This centralizes
that knowledge for increased maintainability and reduced chances on NPE's.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@279334 13f79535-47bb-0310-9956-ffa450edef68
Note: I'm not sure wheter my tmpDir approach is the best.
It's certain to work all the time (depending on FileUtils.createTempFile),
but it may leave a lot of 'garbage' in target/.
o Updated maven-core's assembly descriptor to make use
of new line endings functionality.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@267344 13f79535-47bb-0310-9956-ffa450edef68
make repository metadata behave more like snapshots with daily updates.
next step is to move the version checking to use that instead and fallback to the old files
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@266298 13f79535-47bb-0310-9956-ffa450edef68
o Artifact attachment via MavenProjectHelper was using string literals of the variables I was trying to use to fill in type and classifier (dumb, I know!)
o Source plugin didn't have an @phase for the JarSourceMojo...added, then added the goal configuration in the release profile in the super-pom
o Removed the source plugin bindings for the lifecycle mappings in maven-core
o Re-added [deprecated] method MavenProjectBuilder.build( File, ArtifactRepository, List )...you should use MavenProjectBuilder.build( File, ArtifactRepository, ProfileManager ) instead.
o Added profile handling/injection for the super-pom in two places: in buildStandaloneSuperPom() and in private build(..). This enables injection of the release profile which is provided in the super-pom.
o Added integration test to verify that using -DperformRelease=true results in the sources being attached...to override this behavior, another profile keyed on -DperformRelease could turn the 'attach' param for the source plugin off.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@233245 13f79535-47bb-0310-9956-ffa450edef68
o Added @requiresDirectInvocation (was: @cliOnly, but this implies m2 is run from CLI...counter-intuitive for embedding)
o Added handling for new @requiresDirectInvocation (generation/parsing, MojoDescriptor support, etc.)
o Added check in DefaultLifecycleExecutor to throw a LifecycleExecutionException if a mojo specified in a lifecycle binding is marked as direct-invocation only.
o Added MavenProjectHelper/DefaultMavenProjectHelper to provide convenience methods for manipulating MavenProject instances (for example, attaching artifacts or adding resources)
o Removed maven-artifact dependency from maven-source-plugin, and added dependency on maven-plugin-api (should've been there)
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@233021 13f79535-47bb-0310-9956-ffa450edef68
Fixing profile application to separate profiles discovered in and around POM from those in settings.xml, and apply them separately in the order:
for-each-project-in-inheritance:{POM, profiles.xml}, settings.xml
Added common interface for accumulating, explicitly activating and deactivating, and retrieving profiles to be applied to a given project. This manager interface (ProfileManager) is general enough to be applicable to both the project-level and settings-level profiles.
Added 'performRelease'-keyed profile to super-POM which will be used by the release plugin and anyone using a parallel process, and which will enable '-DupdateReleaseInfo=true' for the deploy mojo, along with enabling the source attachment for the project.
Added 'attach' parameter to JarSourceMojo to allow local POM to turn off source attachments, overriding release profile in super-pom.
Updated the release:perform mojo to use '-DperformRelease=true' for switching on the new release profile, rather than just using '-DupdateReleaseInfo=true'...
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@233013 13f79535-47bb-0310-9956-ffa450edef68
Fixed a merge problem where only direct children of <configuration> in the POM
appeared in the merged configuration.
(like maven-antrun-plugin, the 'tasks' configuration tag didn't have any
value, but has children. After the merge, the children were gone,
and it was marked as having no value, and hence the field was not updated.)
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@232281 13f79535-47bb-0310-9956-ffa450edef68
PluginParameterExpressionEvaluator now has two static final Maps - BANNED_EXPRESSIONS and DEPRECATED_EXPRESSIONS, each of which contain mappings of restricted expressions to the preferred alternative.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@232200 13f79535-47bb-0310-9956-ffa450edef68
sees the plugin and marks it as 'installed' (it's in a hashtable somewhere).
The official way is to go through verifyPlugin. That gets called later on
for that plugin, which only calls addPlugin (that registers, resolves,
and, most importantly, creates a childContainer for that plugin!) IF
the plugin is NOT yet registered.
Since it is registered in the hashtable, but no childRealm was made there,
addPlugin doesn't get called. Added a simple check to ALSO call 'addPlugin'
if it was added to the hashtable. Side effect is that the version that
was normally going to be used is now used and overrides the other version.
This really needs a cleanup!
Committing anyway:
01:26<trygvis> right now I think we're allowed to push over old ladies and
steal candy from small children to get this to work
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@231353 13f79535-47bb-0310-9956-ffa450edef68
o Added --fail-fast --fail-at-end --fail-never CLI options, with appropriate summary and exclusion of dependent projects from the build when --fail-at-end is specified. Also, implemented it0046 and it1011 to test it.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@227490 13f79535-47bb-0310-9956-ffa450edef68
o Moved extension-artifact creation and caching to MavenProject, initialized by MavenProjectBuilder, just like plugin-artifacts is.
o Added extension-artifact and report-artifact creation (and initialization in MavenProject) to MavenProjectBuilder, for consistency with plugin-artifacts
o Removed dependency on ArtifactFactory in DefaultExtensionManager (extension artifacts are reachable from MavenProject now)
This makes the process of resolving all artifacts referenced by a project much simpler and more consistent (namely, for the release plugin)
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@227147 13f79535-47bb-0310-9956-ffa450edef68
under dependencyManagement of m2 and maven-plugins, and removed
versions in all poms having either as a parent.
Used version 1.0.2-SNAPSHOT for plexus-utils as that was used in maven-core
and is not overridable.
o Bumped maven-archiver version to 2.0-beta-1-SNAPSHOT for maven-ear-plugin
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@227084 13f79535-47bb-0310-9956-ffa450edef68
implement ability to retrieve packaging handlers (lifecycle mappings) from extension plugins. Remove plugin mapping
metadata for the same
integration tests are in place for type handlers but commented out until implemented (41)
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@225263 13f79535-47bb-0310-9956-ffa450edef68
o Fixing core-library resolution for expression: ${plugin.artifacts} and ${plugin.artifactMap} (latter is keyed by g:a)
o Modified maven-core-it-plugin to accept something like "-DartifactToFile=org.apache.maven:maven-artifact"...it'll lookup that artifact in ${plugin.artifactMap}, and touch a file that's a mutation of the abs. path for that artifact.
o Added pomArtifact to ResolutionGroup, since the MavenMetadataSource ALWAYS creates a new Artifact for a pom...this allows us to retrieve the resolved Artifact for that pom.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@225234 13f79535-47bb-0310-9956-ffa450edef68
o Added '-f' CLI option, to allow use of non-standard pom files, or spawning of a build from outside of the project dir.
o Added preferential processing of release-pom.xml over pom.xml if it exists (assumes that the current checkout is a release of the software)
o Moved all file discovery from MavenCli to DefaultMaven, to allow embedders to have access to this logic.
o Modified MavenExecutionRequest to add a flag for reactor-activation and the name of a non-standard pom to use, if appropriate.
o Removed getFiles() and getProjectFiles() from MavenExecutionRequest, since file discovery is now done in the DefaultMaven.
o Added integration tests to check preference of release-pom.xml in standalone and '-r' mode
o Added integration tests to check usage of '-f' option within and outside of the project directory
o Added processing for cli-options.txt to maven-core-it-verifier (Verifier.java) to allow specification of '-f' and '-r' in tests
NOTE: the release plugin still doesn't correctly remove the release-pom.xml from HEAD/trunk, since I don't have access to the SCM remove command from maven-scm. I'm waiting for Emmanuel to finish some API changes before moving to the new maven-scm version, and implementing this final step.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@225226 13f79535-47bb-0310-9956-ffa450edef68
allow separate snapshot and release repositories
deprecate existing snapshotPolicy and checksumPolicy in favour of updatePolicy and checksumPolicy within the <releases> and <snapshots> elements in the <repository> element.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@224707 13f79535-47bb-0310-9956-ffa450edef68
o Changed MavenMetadataSource to a component, to avoid having to lookup artifactFactory and projectBuilder in order to
construct it.
o Added add(..) method to ScmBean in the release plugin to allow addition of release-pom.xml
o Changed the PrepareReleaseMojo to resolve ONLY version and parent-version for the normal pom.xml, and fully resolve all
artifacts used in the release-pom.xml, including version, parent-version, dependency closure (given by project.getArtifacts()), plugins, and reports. It will then add the release-pom.xml, and (attempt to) delete it before performing the final commit for next development version.
o Added some mapping methods to ArtifactUtils, to key by artifact.getId, and to create an Artifact.getId()-compatible string from parameters.
o Added TestProjectBuilder to remove the requirement in ProjectClasspathTest to modify the fields of the project builder directly.
o Cleaned up the AbstractReleaseMojo and PrepareReleaseMojo to avoid container lookups...they're now mojo parameters with the 'component.' prefix.
NOTE: Next step is to figure out how to use maven-scm to remove an SCM resource, to enable the prepare mojo to take the release-pom.xml back out of HEAD after the tag is complete.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@224413 13f79535-47bb-0310-9956-ffa450edef68
allow a plugin to specify the minimum Maven version (will apply for both building and its execution - this should be separated later).
If you are running an older version then it will not prompt to update when found, and will fail if it is encountered with a hardcoded version.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@220239 13f79535-47bb-0310-9956-ffa450edef68
Changed download strategy for plugins.xml metadata to download only when non-existent locally or when plugin prefix cannot be located within local metadata. NOTE: This could lead to local-only installs of plugins having their prefix mappings overwritten.
Next step is to change the maven-plugin-plugin.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@219615 13f79535-47bb-0310-9956-ffa450edef68
o Added ResolutionGroup class which contains a set of artifacts and a list of repositories to resolve them.
o Made the ResolutionNode a standalone class, and added the remote repositories to it
o Changed ArtifactMetadataSource.retrieve(..) to return ResolutionGroup rather than Set, in order to help keep track of the repositories which should be used to resolve the retrieved artifacts.
We need some tests for this...
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@219276 13f79535-47bb-0310-9956-ffa450edef68
o Added four command-line options:
--check-plugin-updates is a synonym for --update-plugins
--no-plugin-registry turns off usage of plugin-registry.xml for plugin version resolution for the current build.
--check-plugin-latest turns on usage of LATEST metadata for plugin version resolution for the current build.
--no-plugin-latest turns off usage of LATEST metadata for plugin version resolution for the current build.
o Added settings.xml configuration <usePluginRegistry>true|false</usePluginRegistry> to en/disable the use of plugin-registry.xml for plugin version resolution. The default value is true, to use the plugin-registry.xml.
o Added plugin-registry.xml configuration <checkLatest>true|false</checkLatest> to en/disable the use of LATEST metadata when resolving plugin versions. The default value is false, or do not use LATEST.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@219089 13f79535-47bb-0310-9956-ffa450edef68
o Implemented plan from my comments on MNG-576 for looking up lifecycle mappings within plugins.
o Fixed subtle bug in DefaultWagonManager for verifying checksums, where the destination file was being used to verify the checksum rather than the recently download temp destination.
o Fixed the DefaultRepositoryMetadataManager.resolve(..) method to allow the locally-installed metadata to be used if it is newer than the one resolved from the repository.
o Moved the lifecycle mappings for the EJB and WAR plugins out to META-INF/plexus/components.xml in the respective plugin's src/main/resources directory. it0016 and it0017 still pass.
o Changed the distributionManagement repository for maven-plugins/pom.xml to have id of 'central-plugins' and then added a normal artifact repository definition for central-plugins to that pom, to allow locally-installed repository metadata for the plugins to be put in the right place (and these builds should have access to the central plugin repo anyway).
o Changed the DefaultPluginMappingBuilder to only warn when plugins.xml for a particular plugin group is missing.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@216273 13f79535-47bb-0310-9956-ffa450edef68
MNG-511
MNG-513
Working on:
MNG-449
o Added code to stop the version manager from prompting the user for unregistered plugins; it will simply register them with the resolved version.
o Added failover fourth plugin-version resolution option, which is a plugin-specific artifact metadata called LATEST.version.txt, and will be published with each install/deployment
o Added MavenProject.get/setArtifact(..) to handle a single artifact instance for a project (allows injection of artifact metadata without having to handle it all within the install/deploy mojos).
o Changed plugin-version resolution to only use MavenMetadataSource rather than resolving the whole plugin artifact.
o Changed the install and deploy mojos to only use ${project.artifact} rather than constructing their own, so they can take advantage of metadata added elsewhere in the build.
o Factored the "RELEASE".equals(..) check in the DefaultRepositoryLayout to use new metadata method storedInArtifactDirectory() instead, since RELEASE and LATEST both share this characteristic.
NOTE: I'm not going to resolve MNG-449 yet, because I'm not sure what else Brett had in mind related to the plugin-development-without-release use case...
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@215919 13f79535-47bb-0310-9956-ffa450edef68
Added new mojos to the plugin-plugin that will update the plugins.xml mapping metadata in the plugin's group on the distribution repository.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@210153 13f79535-47bb-0310-9956-ffa450edef68
o Normalized all references to plugins to use either o.a.m.model.Plugin or o.a.m.plugin.PluginDescriptor instances
o Changed DefaultLifecycleExecutor, PluginManager, DefaultPluginManager, MavenPluginCollector, and DoxiaMojo to reflect the above
o Added mapped-plugin resolution of goal prefixes to the DefaultLifecycleExecutor
o Added caching of PluginMappingManager instance inside of MavenSession
o Modified SettingsUtils to be more resistant to null String-Lists for pluginGroups and activeProfiles during merge.
o Added checks to MavenProject.addPlugin(..) to only add if the plugin doesn't already exist in the model.
Next step is to modify installation and deployment process for plugins to publish plugins.xml repository metadata.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@209677 13f79535-47bb-0310-9956-ffa450edef68
o Added component descriptor for the MavenPluginMappingBuilder
o Added a new ComponentDiscoveryListener implementation to factor the DefaultPluginManager out of the plexus.xml for maven-core...the DefaultPluginManager now delegates to this component for plugin registration/lookup/etc. and has proper component requirements.
o Moved the DefaultPluginManager component declaration into components.xml, and added a component definition for MavenPluginCollector to plexus.xml in maven-core
Next step is to get rid of the old pluginKey junk, and start using o.a.m.Plugin instances to hold g🅰️v info for all plugins in the system...this will make the interface cleaner and remove the need to concat/parse the plugin identity. Then, I'll add the mapped-plugin lookup functionality to the lifecycle executor.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@209563 13f79535-47bb-0310-9956-ffa450edef68
o Added maven-plugin-mapping project to handle repository metadata that contains prefix-to-artifactId mappings for groups of plugins
o Added builder classes for plugin mappings
o Modified maven-artifact and maven-artifact-manager to handle the concept of repository metadata in addition to artifact metadata.
o Added pluginGroups section to settings.xml, new code to merge these lists of plugin groups, and a unit test to ensure that this merge is taking place properly.
o Added maven-plugin-mapping to dependencies of maven-core, along with the list of builds to be performed by mboot.
Should be ready to incorporate plugin mapping consultation into the lifecycle executor and the deploy mojo...
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@209550 13f79535-47bb-0310-9956-ffa450edef68
o Pressing [ENTER] at a plugin update prompt should result in the plugin being registered, as indicated by the prompt.
o Use CLI switch '--no-plugin-updates' to suppress usage of the plugin registry
o Use CLI switch '--update-plugins' to force updated/resolved plugin versions to be registered
o Neither of these has a short CLI option, since we're starting to run out of sensible char options for these types of things.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@193082 13f79535-47bb-0310-9956-ffa450edef68
simplified by removing a bunch of duplicated code in addArtifacts - no need to merge, you have the full list.
separated the original artifacts (dependency artifacts) from the resolved artifacts (getArtifacts)
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191667 13f79535-47bb-0310-9956-ffa450edef68
o Pressing [ENTER] at a plugin update prompt should result in the plugin being registered, as indicated by the prompt.
o Use CLI switch '--no-plugin-updates' to suppress usage of the plugin registry
o Use CLI switch '--update-plugins' to force updated/resolved plugin versions to be registered
o Neither of these has a short CLI option, since we're starting to run out of sensible char options for these types of things.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191664 13f79535-47bb-0310-9956-ffa450edef68
split artifact impl from api so that dep resolution can be used independently of wagon
only the first step in making maven-artifact more useful as a public api - more changes to be made
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191634 13f79535-47bb-0310-9956-ffa450edef68
o During addPlugin() only the plugin's artifact is resolved/added...just enough to get the plugin container to discover the pluginDescriptor.
o During getConfiguredMojo(), the rest of the plugin's artifacts will be transitively resolved and added to the plugin container (if this hasn't already been done). The deciding factor for attempting to complete the plugin container's artifact list is whether the only artifact in the pluginDescriptor's artifact list is the plugin artifact itself. If that makes sense.
It's a bit of black magic, but I think it'll work unless/until we find something more elegant. I'm abusing the container a little bit here, so it might be sensitive to plexus changes in future.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191582 13f79535-47bb-0310-9956-ffa450edef68
o Adding extraction of mojo-specific configuration from the merged config for the plugin
o Warning at the DEBUG log-level for unused plugin configuration during the extraction process above
o Added integration test it0028 to test with unused plugin configuration present.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191552 13f79535-47bb-0310-9956-ffa450edef68
o Added checksumPolicy to artifact repository construction, which meant changing all the places where the factory was called.
o Added two command-line switches (-C=strict-checksum-checking, -c=lax-checksum-checking, or warning)
o Added checksum policy to all repository definitions (profiles.mdo, settings.mdo, maven.mdo)
o Changed the maven-artifact-ant stuff to use a Repository definition with checksumPolicy added to it
NOTE: I just realized that I haven't touched the inheritance/conversion of repository stuff from profiles/settings.xml to the model. I'll do this, and commit the additional changes.
Currently, the default checksum policy is to warn, since there are still bad checksums out there that prevent bootstrapping. Once we chase these down, we can change to default-strict checking. When verifying checksums, SHA-1 is attempted first, with MD5 acting as a backup verification method. If the checksum verification fails legitimately (not related to the process of retrieving/reading the checksum file), then the verification process is repeated ONCE ONLY.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191536 13f79535-47bb-0310-9956-ffa450edef68
- refactor project out of MavenSession so that it can be cloned
- refactor lifecycle construction out so we can clone the existing one and pass it into a new execution
- only resolve plugins that are executed (MNG-489)
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191413 13f79535-47bb-0310-9956-ffa450edef68
configure reports according to spec:
- <reporting> section affects reports run through site and standalone
- <build> section affects reports run standalone and overrides anything already in <reporting>
- command line parameters rule all
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191298 13f79535-47bb-0310-9956-ffa450edef68
This fixed a couple of bugs along the way.
One change that this has brought to bear from the document is you now must specify a goal for it to be bound to the LC
(see it0008)
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191285 13f79535-47bb-0310-9956-ffa450edef68
o Changed <reports/> in the Model to <reporting/>, to accommodate the <reports/> inside of <reportSet/>.
o Changed the report-plugin class <plugins/> inside of <report[ing]/> to <reporters/>, which means using a new class called Reporter (this is meant to be a Plugin-like model for reports, with reportSets rather than executions...)
o Changed the MavenProject to reflect these two model changes
o Added support to the inheritance assembler to perform deep inheritance of the reporting model (complete with calculations based on the <inherit/> attributes on Reporter and ReportSet).
o Updated DoxiaMojo, Pom, and DefaultPluginVersionManager to reflect the new model classes and MavenProject methods.
This is only round one of the changes for this issue. The next step is to start binding report configuration to the plugin manager via the lifecycle executor (it will traverse the reporting section, and verifyPlugin() to enable direct calls to the report's mojo).
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191239 13f79535-47bb-0310-9956-ffa450edef68
- hook up the source:jar goal to packaging, but only execute for non-SNAPSHOT builds
- allow comma-delimited list of goals in phase definitions
- only register necessary phases for the goals given
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191111 13f79535-47bb-0310-9956-ffa450edef68
refactor artifact creation to all go through the factory, and assign the type handler from there.
Attach EJB client to the EJB artifact so that it is installed/deployed along with it.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191096 13f79535-47bb-0310-9956-ffa450edef68
o Added support for update-all and update-none when prompting the user.
o Added --update-plugins/-F option to force an update of the plugins used in the project.
o Added autoUpdate setting for the plugin registry. This is used when in non-interactive mode, to determine whether to register plugin updates
o Added updateInterval to determine when/how often to check for updates to registered plugins. Supports three syntaxes:
- 'never'
- 'always'
- 'interval:XXX' (where XXX can be a combination of weeks, days, hours, and minutes in the syntax: 1w1d1h1m)
> this renders the interval syntax similar to 'interval:1w' to check every week.
NOTE: update intervals are calculated from the time a particular plugin was last checked.
o Added lastChecked attribute for registered plugins, to use as a basis for calculating update-check interval
o Added RuntimeInfo classes for maven-settings and maven-plugin-registry, to help in tracking the file each instance comes from, in addition to merging info which is useful when extracting the user-level instance from the merged instance (for persisting changes to the user instance, f.e.).
o Changed verifyPlugin(..) to take an instance of Settings, to allow persistent decisions across the session (like update-all, update-none in the plugin version manager)
This should take care of outstanding issues with this new feature. I'm closing the JIRA issue now, and we'll deal with any bugs/shortcomings as separate issues.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@191021 13f79535-47bb-0310-9956-ffa450edef68
Added specified stop-gap patch for issue: MNG-473 (affects settings-builder and registry-builder)
Today I've made the following progress on this so far:
- Added a new project, called maven-plugin-registry, to house the model for this new file.
- Developed/debugged/tested PluginVersionManager/DefaultPluginVersionManager to isolate the plugin-version checks/management code away from the PluginManager
- Added interactiveMode (<interactiveMode>true|false</interactiveMode> directly under the root element of settings.xml, or -B short CLI option or --batch-mode CLI option, where the CLI options turn OFF interactiveMode). This will allow things like the maven-plugins build to register new plugins (and, for now, new versions of plugins) automatically.
- Added user input handler for when interactiveMode = true, to get a yes/no on whether to use the discovered version over the installed version and/or no version at all. If there is no installed version, and the user selects 'n', then the discovered version is used FOR THAT SESSION ONLY, and won't be recorded in the registry.
- Added checks/recording rejected versions against the registry, before attempting to use the discovered version.
Pending:
- Still need to add update-policies, to determine two things:
1. how often to check for updates
2. what to do when updates are found (autoUpdate, etc.)
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@190854 13f79535-47bb-0310-9956-ffa450edef68
o Adding support for global (installation-level) settings.xml file which is identical to the one in ~/.m2, and which will be overridden by user-level settings. The default location for this is ${maven.home}/settings.xml.
o Adding IT to test merging of global- and user-level settings.xml files
o Moved DefaultMavenSettingsBuilder/MavenSettingsBuilder to maven-settings project, to make them more generally available (to ant, for instance)
Resolves issue: MNG-294
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@190517 13f79535-47bb-0310-9956-ffa450edef68
Now, we're using all artifacts referenced by the plugin in the artifacts list for that PluginDescriptor...the only drawback is since we're not using a repository layout for the maven /lib, there is no good way to include the artifact-path from /lib...we're using the artifact-file from the local repo for those deps. This SHOULDN'T cause a problem, but it's possible...
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@190414 13f79535-47bb-0310-9956-ffa450edef68
o Split ModelNormalizationUtils into two utility classes in the maven-profile and maven-settings projects, to be used for converting Profile instances from the settings.xml and profiles.xml into maven-model instances.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@190344 13f79535-47bb-0310-9956-ffa450edef68
o Adding @phase declarations for those mojos that seem to be part of the main build, just for completeness
o Added two ITs, to test that <executions/> doesn't mess up the normal operation, and to test multi-execution for a goal.
Should resolve: MNG-172.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@190335 13f79535-47bb-0310-9956-ffa450edef68
o External profiles (from settings.xml, profiles.xml) are now available before the main MavenProject is constructed, which allows repositories defined in external profiles to be used to resolve project parents and dependencies.
NOTE: I need to double-check whether the profile-defined repos are actually used to resolve the parent project(s)...there may be another commit following on the heels of this one.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@189667 13f79535-47bb-0310-9956-ffa450edef68
current goals:
projecthelp:active-profiles
projecthelp:effective-pom
o Added source attribute to the Profile model class in maven-model, along with code in the normalization utilities (converters from profiles.xml and settings.xml models to maven-model instances) to identify the source of a particular profile.
o Added a activeProfiles cache of the Profiles in effect for the current project, on the MavenProject class
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@189612 13f79535-47bb-0310-9956-ffa450edef68
reverse the reference. DoxiaMojo depends on maven-core instead of maven-core depending on the reporting api + doxia
This is not a great solution, but it gets us closer. It is currently not possible, as before, to get the correct set of reports as they are all loaded into the one container and then everything found is returned.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@188690 13f79535-47bb-0310-9956-ffa450edef68
move default value into configuration, rather than relying on Java. More convenient for other languages, and allows us to validate/document it. Cleaned up the plugin manager handling. More should be pushed into plexus proper.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@188647 13f79535-47bb-0310-9956-ffa450edef68
o Moved marmalade support dependencies out of maven-core, since they can be supported on demand now
o changed the ordering of the ant and assembly plugins, to show that the classloader (plugin param) bug is fixed.
o added a method in PluginDescriptor which is similar to o.a.m.model.Plugin.getId() (I think that's the method; it's the one that results in a key of 'g:a')
o moved wagon-ssh dependency into maven-core, since there is a new issue related to nested containers and wagons which are introduced as plugin dependencies. This should be solved using a mechanism similar to plugin-manager for wagon-manager impl in future anyway
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@187639 13f79535-47bb-0310-9956-ffa450edef68
This is restoring the settings to their original package structure, and putting profiles next to it...the change I'm reversing was not a good one, conceptually.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@179289 13f79535-47bb-0310-9956-ffa450edef68
o Created corresponding runtime exception: InvalidArtifactRTException
o Added error diagnoser for InvalidArtifactRTException
o Changed logError() in DefaultMaven to use error diagnosers (even the devs could use a hand!)
o Added unit test for InvalidArtifactDiagnoser.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@179265 13f79535-47bb-0310-9956-ffa450edef68
o changed the semantics of when the unsetInheritanceApplied() method is called...it's now only when <inherit/> is NOT set.
o changed the default inheritByDefault attribute on MojoDescriptor to be true
o added inheritByDefault to PluginDescriptor (even though we don't have tools supporting it yet), with semantics identical to MojoDescriptor
o added generator/builder support for the inheritByDefault attribute of PluginDescriptor
o added calculation of inheritanceApplied || inheritByDefault to lifecycle executor before allowing plugins/mojos to bind.
o Everything builds, but we need some sort of IT to test the finer points.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@178836 13f79535-47bb-0310-9956-ffa450edef68
o Added annotation inheritedByDefault (looks like: @inheritedByDefault true|false) for java mojos
o Added support for inheritedByDefault to MojoDescriptor, descriptor generator and builder
o Factored the plugin combinatorial logic into ModelUtils in o.a.m.project, for later reuse in a plugin-aware model inheritance builder
o Refactored the DefaultModelDefaultsInjector to use the new ModelUtils for plugin merging (this is factored into a utility for reuse in inheritance assembly)
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@178733 13f79535-47bb-0310-9956-ffa450edef68
o Added concept of ErrorDiagnoser to help interpret errors and provide user feedback
o Added PluginParameterException to provide richer information than simply PluginConfigurationException (it's derived from PluginConfigurationException)
o Added implementations of ErrorDiagnoser for artifact resolution and plugin configuration handling.
o Modified DefaultMaven's logFailure(..) method to use errorDiagnosers Map (injected via Plexus)
I approached the plugin parameter expression/name feedback in this way, as it seems like a general pattern for interpreting errors without embedding this logic deep within the app itself. Feel free to rollback if this causes issues.
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@169379 13f79535-47bb-0310-9956-ffa450edef68
o Added listing of error messages from getCause() chain in DefaultMaven rather than simply spitting out the (often useless) aggregator Exception's message.
o Added '-e' to the IT verifier's invocation of m2.
I'm trying to get visibility to errors here...
git-svn-id: https://svn.apache.org/repos/asf/maven/components/trunk@169230 13f79535-47bb-0310-9956-ffa450edef68
Brett Leslie Porter
John Dennis Casey
Jason van Zyl
Kenney Westerhof
Trygve Laugstol
Vincent Massol
Emmanuel Venisse