discourse/app/controllers/groups_controller.rb

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1104 lines
33 KiB
Ruby
Raw Normal View History

# frozen_string_literal: true
class GroupsController < ApplicationController
requires_login only: %i[
set_notifications
mentionable
messageable
check_name
2016-12-11 10:36:15 -05:00
update
histories
request_membership
search
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
new
test_email_settings
]
skip_before_action :preload_json, :check_xhr, only: %i[posts_feed mentions_feed]
skip_before_action :check_xhr, only: [:show]
after_action :add_noindex_header
TYPE_FILTERS = {
my:
Proc.new do |groups, user|
raise Discourse::NotFound unless user
Group.member_of(groups, user)
end,
owner:
Proc.new do |groups, user|
raise Discourse::NotFound unless user
Group.owner_of(groups, user)
end,
public: Proc.new { |groups| groups.where(public_admission: true, automatic: false) },
close: Proc.new { |groups| groups.where(public_admission: false, automatic: false) },
automatic: Proc.new { |groups| groups.where(automatic: true) },
non_automatic: Proc.new { |groups| groups.where(automatic: false) },
}
ADD_MEMBERS_LIMIT = 1000
2016-12-14 04:26:16 -05:00
def index
unless SiteSetting.enable_group_directory? || current_user&.staff?
raise Discourse::InvalidAccess.new(:enable_group_directory)
end
order = %w[name user_count].delete(params[:order])
dir = params[:asc].to_s == "true" ? "ASC" : "DESC"
sort = order ? "#{order} #{dir}" : nil
groups = Group.visible_groups(current_user, sort)
type_filters = TYPE_FILTERS.keys
if (username = params[:username]).present?
raise Discourse::NotFound unless user = User.find_by_username(username)
groups = TYPE_FILTERS[:my].call(groups.members_visible_groups(current_user, sort), user)
type_filters = type_filters - %i[my owner]
end
if (filter = params[:filter]).present?
groups = Group.search_groups(filter, groups: groups)
end
if !guardian.is_staff?
# hide automatic groups from all non stuff to de-clutter page
groups =
groups.where("groups.automatic IS FALSE OR groups.id = ?", Group::AUTO_GROUPS[:moderators])
type_filters.delete(:automatic)
end
if Group.preloaded_custom_field_names.present?
Group.preload_custom_fields(groups, Group.preloaded_custom_field_names)
end
if type = params[:type]&.to_sym
raise Discourse::InvalidParameters.new(:type) unless callback = TYPE_FILTERS[type]
groups = callback.call(groups, current_user)
end
if current_user
group_users = GroupUser.where(group: groups, user: current_user)
user_group_ids = group_users.pluck(:group_id)
owner_group_ids = group_users.where(owner: true).pluck(:group_id)
else
type_filters = type_filters - %i[my owner]
end
2016-12-21 07:58:51 -05:00
groups = DiscoursePluginRegistry.apply_modifier(:groups_index_query, groups, self)
type_filters.delete(:non_automatic)
2020-01-16 17:57:34 -05:00
# count the total before doing pagination
total = groups.count
page = fetch_int_from_params(:page, default: 0)
page_size = MobileDetection.mobile_device?(request.user_agent) ? 15 : 36
groups = groups.offset(page * page_size).limit(page_size)
2016-12-21 07:58:51 -05:00
render_json_dump(
groups:
serialize_data(
groups,
BasicGroupSerializer,
user_group_ids: user_group_ids || [],
owner_group_ids: owner_group_ids || [],
),
extras: {
type_filters: type_filters,
},
2020-01-16 17:57:34 -05:00
total_rows_groups: total,
load_more_groups:
groups_path(page: page + 1, type: type, order: order, asc: params[:asc], filter: filter),
2016-12-21 07:58:51 -05:00
)
2016-12-14 04:26:16 -05:00
end
def show
respond_to do |format|
group = find_group(:id)
format.html do
@title = group.full_name.present? ? group.full_name.capitalize : group.name
@full_title = "#{@title} - #{SiteSetting.title}"
@description_meta =
group.bio_cooked.present? ? PrettyText.excerpt(group.bio_cooked, 300) : @title
render :show
end
format.json do
2018-03-29 02:57:10 -04:00
groups = Group.visible_groups(current_user)
if !guardian.is_staff?
groups =
groups.where(
"groups.automatic IS FALSE OR groups.id = ?",
Group::AUTO_GROUPS[:moderators],
)
end
2018-03-29 02:57:10 -04:00
render_json_dump(
group: serialize_data(group, GroupShowSerializer, root: nil),
extras: {
visible_group_names: groups.pluck(:name),
},
)
end
end
end
def new
end
def edit
end
def update
group = Group.find(params[:id])
guardian.ensure_can_edit!(group) if !guardian.can_admin_group?(group)
group_attributes = group_params(automatic: group.automatic)
reset_group_email_settings_if_disabled!(group, group_attributes)
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
categories, tags = []
if !group.automatic || current_user.admin
notification_level, categories, tags = user_default_notifications(group, group_attributes)
if params[:update_existing_users].blank?
user_count = count_existing_users(group.group_users, notification_level, categories, tags)
if user_count > 0
return(
render status: 422,
json: {
user_count: user_count,
errors: [I18n.t("invalid_params", message: :update_existing_users)],
}
)
end
end
end
if group.update(group_attributes)
GroupActionLogger.new(current_user, group).log_change_group_settings
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
group.record_email_setting_changes!(current_user)
group.expire_imap_mailbox_cache
if params[:update_existing_users] == "true"
update_existing_users(group.group_users, notification_level, categories, tags)
end
# Redirect user to groups index page if they can no longer see the group
return redirect_with_client_support groups_path if !guardian.can_see?(group)
render json: success_json
else
render_json_error(group)
end
end
def posts
2014-02-18 16:43:02 -05:00
group = find_group(:group_id)
guardian.ensure_can_see_group_members!(group)
posts =
group.posts_for(guardian, params.permit(:before_post_id, :before, :category_id)).limit(20)
response = { posts: serialize_data(posts, GroupPostSerializer) }
if guardian.can_lazy_load_categories?
category_ids = posts.map { |p| p.topic.category_id }.compact.uniq
categories = Category.secured(guardian).with_parents(category_ids)
response[:categories] = serialize_data(categories, CategoryBadgeSerializer)
end
render json: response
end
def posts_feed
group = find_group(:group_id)
guardian.ensure_can_see_group_members!(group)
@posts =
group.posts_for(guardian, params.permit(:before_post_id, :before, :category_id)).limit(50)
@title =
"#{SiteSetting.title} - #{I18n.t("rss_description.group_posts", group_name: group.name)}"
@link = Discourse.base_url
@description = I18n.t("rss_description.group_posts", group_name: group.name)
render "posts/latest", formats: [:rss]
end
def mentions
raise Discourse::NotFound unless SiteSetting.enable_mentions?
group = find_group(:group_id)
guardian.ensure_can_see_group_members!(group)
posts =
group.mentioned_posts_for(
guardian,
params.permit(:before_post_id, :before, :category_id),
).limit(20)
response = { posts: serialize_data(posts, GroupPostSerializer) }
if guardian.can_lazy_load_categories?
category_ids = posts.map { |p| p.topic.category_id }.compact.uniq
categories = Category.secured(guardian).with_parents(category_ids)
response[:categories] = serialize_data(categories, CategoryBadgeSerializer)
end
render json: response
end
def mentions_feed
raise Discourse::NotFound unless SiteSetting.enable_mentions?
group = find_group(:group_id)
guardian.ensure_can_see_group_members!(group)
@posts =
group.mentioned_posts_for(
guardian,
params.permit(:before_post_id, :before, :category_id),
).limit(50)
@title =
"#{SiteSetting.title} - #{I18n.t("rss_description.group_mentions", group_name: group.name)}"
@link = Discourse.base_url
@description = I18n.t("rss_description.group_mentions", group_name: group.name)
render "posts/latest", formats: [:rss]
end
MEMBERS_MAX_PAGE_SIZE = 1_000
MEMBERS_DEFAULT_PAGE_SIZE = 50
2014-02-06 13:06:19 -05:00
def members
2014-02-18 16:43:02 -05:00
group = find_group(:group_id)
guardian.ensure_can_see_group_members!(group)
limit = fetch_limit_from_params(default: MEMBERS_DEFAULT_PAGE_SIZE, max: MEMBERS_MAX_PAGE_SIZE)
offset = params[:offset].to_i
raise Discourse::InvalidParameters.new(:offset) if offset < 0
dir = (params[:asc] && params[:asc].present?) ? "ASC" : "DESC"
order = "NOT group_users.owner"
if params[:requesters]
guardian.ensure_can_edit!(group)
users = group.requesters
total = users.count
if (filter = params[:filter]).present?
filter = filter.split(",") if filter.include?(",")
if current_user&.admin
users = users.filter_by_username_or_email(filter)
else
users = users.filter_by_username(filter)
end
end
users =
users
.select("users.*, group_requests.reason, group_requests.created_at requested_at")
.order(params[:order] == "requested_at" ? "group_requests.created_at #{dir}" : "")
.order(username_lower: dir)
.limit(limit)
.offset(offset)
return(
render json: {
members: serialize_data(users, GroupRequesterSerializer),
meta: {
total: total,
limit: limit,
offset: offset,
},
}
)
end
include_custom_fields = params[:include_custom_fields] == "true"
allowed_fields =
User.allowed_user_custom_fields(guardian) +
UserField.all.pluck(:id).map { |fid| "#{User::USER_FIELD_PREFIX}#{fid}" }
if params[:order] && %w[last_posted_at last_seen_at].include?(params[:order])
order = "#{params[:order]} #{dir} NULLS LAST"
elsif params[:order] == "added_at"
order = "group_users.created_at #{dir}"
elsif include_custom_fields && params[:order] == "custom_field" &&
allowed_fields.include?(params[:order_field])
order =
"(SELECT value FROM user_custom_fields ucf WHERE ucf.user_id = users.id AND ucf.name = '#{params[:order_field]}') #{dir} NULLS LAST"
end
users = group.users.human_users
total = users.count
if (filter = params[:filter]).present?
filter = filter.split(",") if filter.include?(",")
if current_user&.admin
users = users.filter_by_username_or_email(filter)
else
users = users.filter_by_username(filter)
end
end
users =
users
.includes(:primary_group)
.includes(:user_option)
.select("users.*, group_users.created_at as added_at")
.order(order)
.order(username_lower: dir)
members = users.limit(limit).offset(offset)
owners = users.where("group_users.owner")
group_members_serializer =
include_custom_fields ? GroupUserWithCustomFieldsSerializer : GroupUserSerializer
render json: {
members: serialize_data(members, group_members_serializer),
owners: serialize_data(owners, GroupUserSerializer),
meta: {
total: total,
limit: limit,
offset: offset,
},
}
2014-02-06 13:06:19 -05:00
end
def add_members
group = Group.find(params[:id])
guardian.ensure_can_edit!(group)
users = users_from_params.to_a
emails = []
if params[:emails]
params[:emails]
.split(",")
.each do |email|
existing_user = User.find_by_email(email)
existing_user.present? ? users.push(existing_user) : emails.push(email)
end
end
guardian.ensure_can_invite_to_forum!([group]) if emails.present?
if users.empty? && emails.empty?
raise Discourse::InvalidParameters.new(I18n.t("groups.errors.usernames_or_emails_required"))
end
if users.length > ADD_MEMBERS_LIMIT
return(
Fix i18n issues reported on Crowdin (#11747) * Pluralize `groups.errors.adding_too_many_users` This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/248/en-ar#53882 * Pluralize `js.composer.error.title_too_short` This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/246/en-ar#41172 * Pluralize `js.composer.error.title_too_long` This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/246/en-ar#41174 * Pluralize `js.composer.error.post_length` This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/246/en-ar#41178 * Pluralize `js.topic.progress.jump_prompt_of` This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/246/en-ar#41958 * Use translations to join strings about posters This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/248/en-ar#49334 It also makes some changes to the crawler view: * Removes `poster.moreCount` which is only available on the client for PMs * CSS class names are actually stored in `poster.extras` instead of `poster.extraClasses` * Stop concatenating category stats This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/246/en-ar#40740 * Pluralize `js.summary.description` This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/246/en-ar#40782 * Pluralize `js.summary.description_time_MF` This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/246/en-ar#40784 * Use translation to join list of tags This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/246/en-ar#43372 * Pluralize `admin_js.admin.groups.manage.membership.automatic_membership_user_count` This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/246/en-ar#43720 * Pluralize `js.post.controls.delete_topic_confirm_modal` This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/246/en-ar#54804 * Stop concatenating `js.post.last_edited_on` This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/246/en-ar#42358 * Stop concatenating `js.post.wiki_last_edited_on` This fixes https://discourse.crowdin.com/translate/f3230e7607a36bb0a2f97fd90605a44e/246/en-ar#42356 It also fixes a regression because `js.post.wiki_last_edited_on` wasn't used anymore since 2017.
2021-02-02 04:50:04 -05:00
render_json_error(I18n.t("groups.errors.adding_too_many_users", count: ADD_MEMBERS_LIMIT))
)
end
usernames_already_in_group = group.users.where(id: users.map(&:id)).pluck(:username)
if usernames_already_in_group.present? && usernames_already_in_group.length == users.length &&
emails.blank?
render_json_error(
I18n.t(
"groups.errors.member_already_exist",
username: usernames_already_in_group.sort.join(", "),
count: usernames_already_in_group.size,
),
)
else
notify = params[:notify_users]&.to_s == "true"
uniq_users = users.uniq
uniq_users.each { |user| add_user_to_group(group, user, notify) }
emails.each do |email|
begin
Invite.generate(current_user, email: email, group_ids: [group.id])
rescue RateLimiter::LimitExceeded => e
return(
render_json_error(
I18n.t(
"invite.rate_limit",
count: SiteSetting.max_invites_per_day,
time_left: e.time_left,
),
)
)
end
end
render json: success_json.merge!(usernames: uniq_users.map(&:username), emails: emails)
end
end
def add_owners
group = Group.find_by(id: params.require(:id))
raise Discourse::NotFound unless group
return can_not_modify_automatic if group.automatic
guardian.ensure_can_edit_group!(group)
users = users_from_params
group_action_logger = GroupActionLogger.new(current_user, group)
users.each do |user|
if !group.users.include?(user)
group.add(user)
group_action_logger.log_add_user_to_group(user)
end
group.group_users.where(user_id: user.id).update_all(owner: true)
group_action_logger.log_make_user_group_owner(user)
group.notify_added_to_group(user, owner: true) if params[:notify_users].to_s == "true"
end
group.restore_user_count!
render json: success_json.merge!(usernames: users.pluck(:username))
end
def join
ensure_logged_in
unless current_user.staff?
RateLimiter.new(current_user, "public_group_membership", 3, 1.minute).performed!
end
group = Group.find(params[:id])
raise Discourse::NotFound unless group
raise Discourse::InvalidAccess unless group.public_admission
return if group.users.exists?(id: current_user.id)
add_user_to_group(group, current_user)
end
def handle_membership_request
group = Group.find_by(id: params[:id])
raise Discourse::InvalidParameters.new(:id) if group.blank?
guardian.ensure_can_edit!(group)
user = User.find_by(id: params[:user_id])
raise Discourse::InvalidParameters.new(:user_id) if user.blank?
# find original membership request PM
request_topic =
Topic.find_by(
title:
I18n.t(
"groups.request_membership_pm.title",
group_name: group.name,
locale: user.effective_locale,
),
archetype: Archetype.private_message,
user_id: user.id,
)
ActiveRecord::Base.transaction do
if params[:accept]
group.add(user)
GroupActionLogger.new(current_user, group).log_add_user_to_group(user)
end
GroupRequest.where(group_id: group.id, user_id: user.id).delete_all
end
if params[:accept]
PostCreator.new(
current_user,
post_type: Post.types[:regular],
topic_id: request_topic.id,
raw:
I18n.t(
"groups.request_accepted_pm.body",
group_name: group.name,
locale: user.effective_locale,
),
reply_to_post_number: 1,
target_usernames: user.username,
skip_validations: true,
).create!
end
render json: success_json
end
def mentionable
group = find_group(:group_id, ensure_can_see: false)
if group
render json: { mentionable: Group.mentionable(current_user).where(id: group.id).present? }
else
raise Discourse::InvalidAccess.new
end
end
def messageable
group = find_group(:group_id, ensure_can_see: false)
if group
render json: { messageable: guardian.can_send_private_message?(group) }
else
raise Discourse::InvalidAccess.new
end
end
def check_name
group_name = params.require(:group_name)
checker = UsernameCheckerService.new(allow_reserved_username: true)
render json: checker.check_username(group_name, nil)
end
def remove_member
2018-04-06 05:11:00 -04:00
group = Group.find_by(id: params[:id])
raise Discourse::NotFound unless group
guardian.ensure_can_edit!(group)
2016-12-06 23:06:56 -05:00
# Maintain backwards compatibility
params[:usernames] = params[:username] if params[:username].present?
params[:user_emails] = params[:user_email] if params[:user_email].present?
users = users_from_params
if users.empty?
raise Discourse::InvalidParameters.new("user_ids or usernames or user_emails must be present")
end
2016-12-06 23:06:56 -05:00
removed_users = []
skipped_users = []
users.each do |user|
if group.remove(user)
removed_users << user.username
GroupActionLogger.new(current_user, group).log_remove_user_from_group(user)
else
if group.users.exclude? user
skipped_users << user.username
else
raise Discourse::InvalidParameters
end
end
end
render json: success_json.merge!(usernames: removed_users, skipped_usernames: skipped_users)
end
def leave
ensure_logged_in
unless current_user.staff?
RateLimiter.new(current_user, "public_group_membership", 3, 1.minute).performed!
end
group = Group.find_by(id: params[:id])
raise Discourse::NotFound unless group
raise Discourse::InvalidAccess unless group.public_exit
if group.remove(current_user)
GroupActionLogger.new(current_user, group).log_remove_user_from_group(current_user)
end
end
MAX_NOTIFIED_OWNERS ||= 20
def request_membership
params.require(:reason)
group = find_group(:id)
begin
GroupRequest.create!(group: group, user: current_user, reason: params[:reason])
rescue ActiveRecord::RecordNotUnique
return(
render json: failed_json.merge(error: I18n.t("groups.errors.already_requested_membership")),
status: 409
)
end
usernames = [current_user.username].concat(
group
.users
.where("group_users.owner")
.order("users.last_seen_at DESC")
.limit(MAX_NOTIFIED_OWNERS)
.pluck("users.username"),
)
post =
PostCreator.new(
current_user,
title: I18n.t("groups.request_membership_pm.title", group_name: group.name),
raw: params[:reason],
archetype: Archetype.private_message,
target_usernames: usernames.join(","),
topic_opts: {
custom_fields: {
requested_group_id: group.id,
},
},
skip_validations: true,
).create!
render json: success_json.merge(relative_url: post.topic.relative_url)
end
def set_notifications
group = find_group(:id)
notification_level = params.require(:notification_level)
user_id = current_user.id
user_id = params[:user_id] || user_id if guardian.is_staff?
GroupUser
.where(group_id: group.id)
.where(user_id: user_id)
.update_all(notification_level: notification_level)
render json: success_json
end
2016-12-11 10:36:15 -05:00
def histories
group = find_group(:group_id)
guardian.ensure_can_edit!(group) unless guardian.can_admin_group?(group)
2016-12-11 10:36:15 -05:00
page_size = 25
offset = (params[:offset] && params[:offset].to_i) || 0
group_histories =
GroupHistory.with_filters(group, params[:filters]).limit(page_size).offset(offset * page_size)
render_json_dump(
logs: serialize_data(group_histories, BasicGroupHistorySerializer),
all_loaded: group_histories.count < page_size,
)
end
def search
groups =
Group
.visible_groups(current_user)
.where("groups.id <> ?", Group::AUTO_GROUPS[:everyone])
.includes(:flair_upload)
.order(:name)
if (term = params[:term]).present?
groups =
groups.where(
"position(LOWER(:term) IN LOWER(groups.name)) <> 0 OR position(LOWER(:term) IN LOWER(groups.full_name)) <> 0",
term: term,
)
end
groups = groups.where(automatic: false) if params[:ignore_automatic].to_s == "true"
groups = DiscoursePluginRegistry.apply_modifier(:groups_search_query, groups, self)
if Group.preloaded_custom_field_names.present?
Group.preload_custom_fields(groups, Group.preloaded_custom_field_names)
end
render_serialized(groups, BasicGroupSerializer)
end
def permissions
group = find_group(:id)
category_groups =
group.category_groups.select do |category_group|
guardian.can_see_category?(category_group.category)
end
render_serialized(
category_groups.sort_by { |category_group| category_group.category.name },
CategoryGroupSerializer,
)
end
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
def test_email_settings
params.require(:group_id)
params.require(:protocol)
params.require(:port)
params.require(:host)
params.require(:username)
params.require(:password)
group = Group.find(params[:group_id])
guardian.ensure_can_edit!(group)
RateLimiter.new(current_user, "group_test_email_settings", 5, 1.minute).performed!
settings = params.except(:group_id, :protocol)
email_host = params[:host]
if !%w[smtp imap].include?(params[:protocol])
raise Discourse::InvalidParameters.new("Valid protocols to test are smtp and imap")
end
hijack do
begin
case params[:protocol]
when "smtp"
raise Discourse::InvalidParameters if params[:ssl_mode].blank?
settings.delete(:ssl_mode)
if params[:ssl_mode].blank? ||
!Group.smtp_ssl_modes.values.include?(params[:ssl_mode].to_i)
raise Discourse::InvalidParameters.new("SSL mode must be present and valid")
end
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
final_settings =
settings.merge(
enable_tls: params[:ssl_mode].to_i == Group.smtp_ssl_modes[:ssl_tls],
enable_starttls_auto: params[:ssl_mode].to_i == Group.smtp_ssl_modes[:starttls],
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
).permit(:host, :port, :username, :password, :enable_tls, :enable_starttls_auto, :debug)
EmailSettingsValidator.validate_as_user(
current_user,
"smtp",
**final_settings.to_h.symbolize_keys,
)
when "imap"
raise Discourse::InvalidParameters if params[:ssl].blank?
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
final_settings =
settings.merge(ssl: settings[:ssl] == "true").permit(
:host,
:port,
:username,
:password,
:ssl,
:debug,
)
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
EmailSettingsValidator.validate_as_user(
current_user,
"imap",
**final_settings.to_h.symbolize_keys,
)
end
render json: success_json
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
rescue *EmailSettingsExceptionHandler::EXPECTED_EXCEPTIONS, StandardError => err
render_json_error(EmailSettingsExceptionHandler.friendly_exception_message(err, email_host))
end
end
end
protected
def can_not_modify_automatic
render_json_error(I18n.t("groups.errors.can_not_modify_automatic"))
end
2014-02-18 16:43:02 -05:00
private
def add_user_to_group(group, user, notify = false)
group.add(user)
GroupActionLogger.new(current_user, group).log_add_user_to_group(user)
group.notify_added_to_group(user) if notify
rescue ActiveRecord::RecordNotUnique
# Under concurrency, we might attempt to insert two records quickly and hit a DB
# constraint. In this case we can safely ignore the error and act as if the user
# was added to the group.
end
def group_params(automatic: false)
attributes = %i[
bio_raw
default_notification_level
messageable_level
mentionable_level
flair_bg_color
flair_color
flair_icon
flair_upload_id
]
if !automatic
attributes.push(
:title,
:allow_membership_requests,
:full_name,
:public_exit,
:public_admission,
:membership_request_template,
)
end
attributes.push(:visibility_level, :members_visibility_level) if current_user.staff?
if !automatic && current_user.staff?
attributes.push(
:incoming_email,
:smtp_server,
:smtp_port,
:smtp_ssl_mode,
:smtp_enabled,
:smtp_updated_by,
:smtp_updated_at,
:imap_server,
:imap_port,
:imap_ssl,
:imap_mailbox_name,
:imap_enabled,
:imap_updated_by,
:imap_updated_at,
:email_username,
:email_password,
:email_from_alias,
:primary_group,
:name,
:grant_trust_level,
:automatic_membership_email_domains,
:publish_read_state,
:allow_unknown_sender_topic_replies,
)
custom_fields = DiscoursePluginRegistry.editable_group_custom_fields
attributes << { custom_fields: custom_fields } if custom_fields.present?
end
if !automatic || current_user.admin
%i[muted regular tracking watching watching_first_post].each do |level|
attributes << { "#{level}_category_ids" => [] }
attributes << { "#{level}_tags" => [] }
end
end
attributes << { associated_group_ids: [] } if guardian.can_associate_groups?
attributes.concat(DiscoursePluginRegistry.group_params)
params.require(:group).permit(*attributes)
end
def find_group(param_name, ensure_can_see: true)
name = params.require(param_name)
group = Group.find_by("LOWER(name) = ?", name.downcase)
raise Discourse::NotFound if ensure_can_see && !guardian.can_see_group?(group)
group
end
def users_from_params
if params[:usernames].present?
users = User.where(username_lower: params[:usernames].split(",").map(&:downcase))
raise Discourse::InvalidParameters.new(:usernames) if users.blank?
elsif params[:user_id].present?
users = User.where(id: params[:user_id].to_i)
raise Discourse::InvalidParameters.new(:user_id) if users.blank?
elsif params[:user_ids].present?
users = User.where(id: params[:user_ids].to_s.split(","))
raise Discourse::InvalidParameters.new(:user_ids) if users.blank?
elsif params[:user_emails].present?
users = User.with_email(params[:user_emails].split(","))
raise Discourse::InvalidParameters.new(:user_emails) if users.blank?
else
users = []
end
users
end
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
def reset_group_email_settings_if_disabled!(group, attributes)
should_clear_imap = group.imap_enabled && attributes[:imap_enabled] == "false"
should_clear_smtp = group.smtp_enabled && attributes[:smtp_enabled] == "false"
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
if should_clear_imap || should_clear_smtp
attributes[:imap_server] = nil
attributes[:imap_ssl] = false
attributes[:imap_port] = nil
attributes[:imap_mailbox_name] = ""
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
end
if should_clear_smtp
attributes[:smtp_server] = nil
attributes[:smtp_ssl_mode] = false
attributes[:smtp_port] = nil
attributes[:email_username] = nil
attributes[:email_password] = nil
FEATURE: Improve group email settings UI (#13083) This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory. ### UI Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP. You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator. If there is an issue with the configuration or credentials a meaningful error message should be shown. IMAP settings must also be validated when IMAP is enabled, before saving. When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved): ### Database & Backend This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group. For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous. There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-27 19:28:18 -04:00
end
end
def user_default_notifications(group, params)
category_notifications =
group.group_category_notification_defaults.pluck(:category_id, :notification_level).to_h
tag_notifications =
group.group_tag_notification_defaults.pluck(:tag_id, :notification_level).to_h
categories = {}
tags = {}
NotificationLevels.all.each do |key, value|
category_ids = (params["#{key}_category_ids".to_sym] || []) - ["-1"]
category_ids.each do |category_id|
category_id = category_id.to_i
old_value = category_notifications[category_id]
metadata = { old_value: old_value, new_value: value }
if old_value.blank?
metadata[:action] = :create
elsif old_value == value
category_notifications.delete(category_id)
next
else
metadata[:action] = :update
end
categories[category_id] = metadata
end
tag_names = (params["#{key}_tags".to_sym] || []) - ["-1"]
tag_ids = Tag.where(name: tag_names).pluck(:id)
tag_ids.each do |tag_id|
old_value = tag_notifications[tag_id]
metadata = { old_value: old_value, new_value: value }
if old_value.blank?
metadata[:action] = :create
elsif old_value == value
tag_notifications.delete(tag_id)
next
else
metadata[:action] = :update
end
tags[tag_id] = metadata
end
end
(category_notifications.keys - categories.keys).each do |category_id|
categories[category_id] = { action: :delete, old_value: category_notifications[category_id] }
end
(tag_notifications.keys - tags.keys).each do |tag_id|
tags[tag_id] = { action: :delete, old_value: tag_notifications[tag_id] }
end
notification_level = nil
default_notification_level = params[:default_notification_level]&.to_i
if default_notification_level.present? &&
group.default_notification_level != default_notification_level
notification_level = {
old_value: group.default_notification_level,
new_value: default_notification_level,
}
end
[notification_level, categories, tags]
end
%i[count update].each do |action|
define_method("#{action}_existing_users") do |group_users, notification_level, categories, tags|
return 0 if notification_level.blank? && categories.blank? && tags.blank?
ids = []
if notification_level.present?
users = group_users.where(notification_level: notification_level[:old_value])
if action == :update
users.update_all(notification_level: notification_level[:new_value])
else
ids += users.pluck(:user_id)
end
end
categories.each do |category_id, data|
if data[:action] == :update || data[:action] == :delete
category_users =
CategoryUser.where(
category_id: category_id,
notification_level: data[:old_value],
user_id: group_users.select(:user_id),
)
if action == :update
category_users.delete_all
else
ids += category_users.pluck(:user_id)
end
categories.delete(category_id) if data[:action] == :delete && action == :update
end
end
tags.each do |tag_id, data|
if data[:action] == :update || data[:action] == :delete
tag_users =
TagUser.where(
tag_id: tag_id,
notification_level: data[:old_value],
user_id: group_users.select(:user_id),
)
if action == :update
tag_users.delete_all
else
ids += tag_users.pluck(:user_id)
end
tags.delete(tag_id) if data[:action] == :delete && action == :update
end
end
if categories.present? || tags.present?
group_users
.select(:id, :user_id)
.find_in_batches do |batch|
user_ids = batch.pluck(:user_id)
categories.each do |category_id, data|
category_users = []
existing_users =
CategoryUser.where(category_id: category_id, user_id: user_ids).where(
"notification_level IS NOT NULL",
)
skip_user_ids = existing_users.pluck(:user_id)
batch.each do |group_user|
next if skip_user_ids.include?(group_user.user_id)
category_users << {
category_id: category_id,
user_id: group_user.user_id,
notification_level: data[:new_value],
}
end
next if category_users.blank?
if action == :update
CategoryUser.insert_all!(category_users)
else
ids += category_users.pluck(:user_id)
end
end
tags.each do |tag_id, data|
tag_users = []
existing_users =
TagUser.where(tag_id: tag_id, user_id: user_ids).where(
"notification_level IS NOT NULL",
)
skip_user_ids = existing_users.pluck(:user_id)
batch.each do |group_user|
next if skip_user_ids.include?(group_user.user_id)
tag_users << {
tag_id: tag_id,
user_id: group_user.user_id,
notification_level: data[:new_value],
created_at: Time.now,
updated_at: Time.now,
}
end
next if tag_users.blank?
if action == :update
TagUser.insert_all!(tag_users)
else
ids += tag_users.pluck(:user_id)
end
end
end
end
ids.uniq.count
end
end
end