This commit introduces a new site setting: `use_name_for_username_suggestions` (default true)
Admins can disable it if they want to stop using Name values when generating usernames for users. This can be useful if you want to keep real names private-by-default or, when used in conjunction with the `use_email_for_username_and_name_suggestions` setting, you would prefer to use email-based username suggestions.
Mozilla Thunderbird email client add links into HTML as follows:
`<p>The link: <a class="moz-txt-link-freetext" href="https://google.com">https://google.com</a></p>`
Current filtering rules strip out the link, leaving only `<p>The link: </p>`.
Properly strip only unnecessary information: quote prefix, signature, forwarded message header.
This pull request follows on from https://github.com/discourse/discourse/pull/16308. This one does the following:
* Changes `BookmarkQuery` to allow for querying more than just Post and Topic bookmarkables
* Introduces a `Bookmark.register_bookmarkable` method which requires a model, serializer, fields and preload includes for searching. These registered `Bookmarkable` types are then used when validating new bookmarks, and also when determining which serializer to use for the bookmark list. The `Post` and `Topic` bookmarkables are registered by default.
* Adds new specific types for Post and Topic bookmark serializers along with preloading of associations in `UserBookmarkList`
* Changes to the user bookmark list template to allow for more generic bookmarkable types alongside the Post and Topic ones which need to display in a particular way
All of these changes are gated behind the `use_polymorphic_bookmarks` site setting, apart from the .hbs changes where I have updated the original `UserBookmarkSerializer` with some stub methods.
Following this PR will be several plugin PRs (for assign, chat, encrypt) that will register their own bookmarkable types or otherwise alter the bookmark serializers in their own way, also gated behind `use_polymorphic_bookmarks`.
This commit also removes `BookmarkQuery.preloaded_custom_fields` and the functionality surrounding it. It was added in 0cd502a558 but only used by one plugin (discourse-assign) where it has since been removed, and is now used by no plugins. We don't need it anymore.
Previously, accessing the Rails app directly in development mode would give you assets from our 'legacy' Ember asset pipeline. The only way to run with Ember CLI assets was to run ember-cli as a proxy. This was quite limiting when working on things which are bypassed when using the ember-cli proxy (e.g. changes to `application.html.erb`). Also, since `ember-auto-import` introduced chunking, visiting `/theme-qunit` under Ember CLI was failing to include all necessary chunks.
This commit teaches Sprockets about our Ember CLI assets so that they can be used in development mode, and are automatically collected up under `/public/assets` during `assets:precompile`. As a bonus, this allows us to remove all the custom manifest modification from `assets:precompile`.
The key changes are:
- Introduce a shared `EmberCli.enabled?` helper
- When ember-cli is enabled, add ember-cli `/dist/assets` as the top-priority Rails asset directory
- Have ember-cli output a `chunks.json` manifest, and teach `preload_script` to read it and append the correct chunks to their associated `afterFile`
- Remove most custom ember-cli logic from the `assets:precompile` step. Instead, rely on Rails to take care of pulling the 'precompiled' assets into the `public/assets` directory. Move the 'renaming' logic to runtime, so it can be used in development mode as well.
- Remove fingerprinting from `ember-cli-build`, and allow Rails to take care of things
Long-term, we may want to replace Sprockets with the lighter-weight Propshaft. The changes made in this commit have been made with that long-term goal in mind.
tldr: when you visit the rails app directly, you'll now be served the current ember-cli assets. To keep these up-to-date make sure either `ember serve`, or `ember build --watch` is running. If you really want to load the old non-ember-cli assets, then you should start the server with `EMBER_CLI_PROD_ASSETS=0`. (the legacy asset pipeline will be removed very soon)
This reverts commit 01107e418e.
We have seen some random occurrences of corrupted assets, and think it may be related to the sprockets 4 update. Reverting for investigation
We intend to switch to the `:json` serializer, which will stringify all keys. However, we need a clean revert path. This commit ensures that our `_t` cookie handling works with both marshal (the current default) and json (the new default) serialization.
This PR enables custom email dark mode styles by default that were added here.
There is currently poor support for dark mode queries in mail clients. The main beneficiary of these changes will be Apple Mail and Outlook.
Enjoy the darkness 🕶️
When changing upload security using `Upload#update_secure_status`,
we may not have the context of how an upload is being created, because
this code path can be run through scheduled jobs. When calling
update_secure_status, the normal ActiveRecord validations are run,
and ours include validating extensions. In some cases the upload
is created in an automated way, such as user export zips, and the
security is applied later, with the extension prohibited from
use when normally uploading.
This caused the upload to fail validation on `update_secure_status`,
causing the security change to silently fail. This fixes the issue
by skipping the file extension validation when the upload security
is being changed.
The main difference is that Sprockets 4.0 no longer tries to compile everything by default. This is good for us, because we can remove all our custom 'exclusion' logic which was working around the old sprockets 3.0 behavior.
The other big change is that lambdas can no longer be added to the `config.assets.precompile` array. Instead, we can do the necessary globs ourselves, and add the desired files manually.
A small patch is required to make ember-rails compatible. Since we plan to remove this dependency in the near future, I do not intend to upstream this change.
I have compared the `bin/rake assets:precompile` output before and after this change, and verified that all files are present.
Discourse has the Discourse Connect Provider protocol that makes it possible to
use a Discourse instance as an identity provider for external sites. As a
natural extension to this protocol, this PR adds a new feature that makes it
possible to use Discourse as a 2FA provider as well as an identity provider.
The rationale for this change is that it's very difficult to implement 2FA
support in a website and if you have multiple websites that need to have 2FA,
it's unrealistic to build and maintain a separate 2FA implementation for each
one. But with this change, you can piggyback on Discourse to take care of all
the 2FA details for you for as many sites as you wish.
To use Discourse as a 2FA provider, you'll need to follow this guide:
https://meta.discourse.org/t/-/32974. It walks you through what you need to
implement on your end/site and how to configure your Discourse instance. Once
you're done, there is only one additional thing you need to do which is to
include `require_2fa=true` in the payload that you send to Discourse.
When Discourse sees `require_2fa=true`, it'll prompt the user to confirm their
2FA using whatever methods they've enabled (TOTP or security keys), and once
they confirm they'll be redirected back to the return URL you've configured and
the payload will contain `confirmed_2fa=true`. If the user has no 2FA methods
enabled however, the payload will not contain `confirmed_2fa`, but it will
contain `no_2fa_methods=true`.
You'll need to be careful to re-run all the security checks and ensure the user
can still access the resource on your site after they return from Discourse.
This is very important because there's nothing that guarantees the user that
will come back from Discourse after they confirm 2FA is the same user that
you've redirected to Discourse.
Internal ticket: t62183.
The main difference is that Sprockets 4.0 no longer tries to compile everything by default. This is good for us, because we can remove all our custom 'exclusion' logic which was working around the old sprockets 3.0 behavior.
The other big change is that lambdas can no longer be added to the `config.assets.precompile` array. Instead, we can do the necessary globs ourselves, and add the desired files manually.
A small patch is required to make ember-rails compatible. Since we plan to remove this dependency in the near future, I do not intend to upstream this change.
I have compared the `bin/rake assets:precompile` output before and after this change, and verified that all files are present.
Sometimes we need to update a _lot_ of ACLs on S3 (such as when secure media
is enabled), and since it takes ~1s per upload to update the ACL, this is
best spread out over many jobs instead of having to do the whole thing serially.
In future, it will be better to have a job that can be run based on
a column on uploads (e.g. acl_stale) so we can track progress, similar
to how we can set the baked_version to nil to rebake posts.
Due to default CSP web workers instantiated from CDN based assets are still
treated as "same-origin" meaning that we had no way of safely instansiating
a web worker from a theme.
This limits the theme system and adds the arbitrary restriction that WASM
based components can not be safely used.
To resolve this limitation all js assets in about.json are also cached on
local domain.
{
"name": "Header Icons",
"assets" : {
"worker" : "assets/worker.js"
}
}
This can then be referenced in JS via:
settings.theme_uploads_local.worker
local_js_assets are unconditionally served from the site directly and
bypass the entire CDN, using the pre-existing JavascriptCache
Previous to this change this code was completely dormant on sites which
used s3 based uploads, this reuses the very well tested and cached asset
system on s3 based sites.
Note, when creating local_js_assets it is highly recommended to keep the
assets lean and keep all the heavy working in CDN based assets. For example
wasm files can still live on the CDN but the lean worker that loads it can
live on local.
This change unlocks wasm in theme components, so wasm is now also allowed
in `theme_authorized_extensions`
* more usages of upload.content
* add a specific test for upload.content
* Adjust logic to ensure that after upgrades we still get a cached local js
on save
1. Sort plugins by name
2. Include plugins that are a symbolic link to a submodule repo (in those cases `.git` isn't a directory but a file that looks like e.g. `gitdir: ../../.git/modules/plugins/name-here`)
Currently we’re reopening the `Sanitize::Config` class (which is part of
the `sanitize` gem) to put our custom config for Onebox in it. This is
unnecessary as we can simply create a dedicated module to hold our
custom configuration.
Previously we only supported a single 'required tag group' for a category. This commit allows admins to specify multiple required tag groups, each with their own minimum tag count.
A new category_required_tag_groups database table replaces the existing columns on the categories table. Data is automatically migrated.
Previous to this change an optimisation stripped crawler content from
all mobile browsers.
This had a side effect that meant that when we dropped support for an old
mobile platform we would stop rendering topic and topic list pages.
The new implementation ensures we only perform the optimisation on modern
mobile browsers.
This patch removes some of our freedom patches that have been deprecated
for some time now.
Some of them have been updated so we’re not shipping code based on an
old version of Rails.
1. `test/run-qunit.js` wasn't eslinted (I'm not adding it to the CI workflow for now, just fixed the issues)
2. "…" utf character isn't rendered correctly in Jenkins, replaced with three dots
3. Don't try to lint `tmp` when doing `eslint .` in the root dir
This commit introduces a new use_polymorphic_bookmarks site setting
that is default false and hidden, that will be used to help continuous
development of polymorphic bookmarks. This setting **should not** be
enabled anywhere in production yet, it is purely for local development.
This commit uses the setting to enable create/update/delete actions
for polymorphic bookmarks on the server and client side. The bookmark
interactions on topics/posts are all usable. Listing, searching,
sending bookmark reminders, and other edge cases will be handled
in subsequent PRs.
Comprehensive UI tests will be added in the final PR -- we already
have them for regular bookmarks, so it will just be a matter of
changing them to be for polymorphic bookmarks.
Tags (and tag groups) can be configured so that they can only be used in specific categories and (optionally) restrict topics in these categories to be able to add/use only these tags. These restrictions work as expected when a topic is created without going through the review queue; however, if the topic has to be reviewed by a moderator then these restrictions currently aren't checked before the topic is sent to the review queue, but they're checked later when a moderator tries to approve the topic. This is because if a user manages to submit a topic that doesn't meet the restrictions, moderators won't be able to approve and it'll be stuck in the review queue.
This PR prevents topics that don't meet the tags requirements from being sent to the review queue and shows the poster an error message that indicates which tags that cannot be used.
Internal ticket: t60562.
PostAnalyzer and CookedPostProcessor both replace URLs with oneboxes.
PostAnalyzer did not use the max_oneboxes_per_post site and setting and
CookedPostProcessor replaced at most max_oneboxes_per_post URLs ignoring
the oneboxes that were replaced already by PostAnalyzer.
If the crawled page returned an error, `FinalDestination#safe_get`
yielded `nil` for `uri` and `chunk` arguments. Another problem is that
`get` did not handle the case when `safe_get` failed and did not return
the `location` and `set_cookie` headers.
If a group's messageable_level is set to nobody then staff can't should not be able to send PMs to it.
Co-authored-by: Martin Brennan <martin@discourse.org>
Plugins like chat add custom score type to override the title in the UI, but that should be reserved for situations when you need to manage the flag priority separately, which is configurable in the queue settings page.
Currently, if a plugin creates a custom score type, it won't be able to associate a priority, so there's no real gain from doing so. Priorities are tightly related to post-action types, which is something we might want to revise. For now, this change lets plugins move away from custom score types without compromises.
Missing plugin gems are installed when the app is being loaded.
That means when you run `bin/rails plugin:install_all_gems` it first installs missing gems and then reinstalls all gems…
Also, the method these rake tasks were using to install gems was very crude, and the regex there was incorrect which resulted in failures in certain cases. Though that didn't matter since those gems were being installed using a correct method just moments before…
* FEATURE: use canonical links in posts.rss feed
Previously we used non canonical links in posts.rss
These links get crawled frequently by crawlers when discovering new
content forcing crawlers to hop to non canonical pages just to end up
visiting canonical pages
This uses up expensive crawl time and adds load on Discourse sites
Old links were of the form:
`https://DOMAIN/t/SLUG/43/21`
New links are of the form
`https://DOMAIN/t/SLUG/43?page=2#post_21`
This also adds a post_id identified element to crawler view that was
missing.
Note, to avoid very expensive N+1 queries required to figure out the
page a post is on during rss generation, we cache that information.
There is a smart "cache breaker" which ensures worst case scenario is
a "page drift" - meaning we would publicize a post is on page 11 when
it is actually on page 10 due to post deletions. Cache holds for up to
12 hours.
Change only impacts public post RSS feeds (`/posts.rss`)
…to avoid repeatedly printed notes:
```
hint: Pulling without specifying how to reconcile divergent branches is
hint: discouraged. You can squelch this message by running one of the following
hint: commands sometime before your next pull:
hint:
hint: git config pull.rebase false # merge (the default strategy)
hint: git config pull.rebase true # rebase
hint: git config pull.ff only # fast-forward only
hint:
hint: You can replace "git config" with "git config --global" to set a default
hint: preference for all repositories. You can also pass --rebase, --no-rebase,
hint: or --ff-only on the command line to override the configured default per
hint: invocation.
```
The `blocked onebox domains` setting lets site owners change what sites
are allowed to be oneboxed. When a link is entered into a post,
Discourse checks the domain of the link against that setting and blocks
the onebox if the domain is blocked. But if there's a chain of
redirects, then only the final destination website is checked against
the site setting.
This commit amends that behavior so that every website in the redirect
chain is checked against the site setting, and if anything is blocked
the original link doesn't onebox at all in the post. The
`Discourse-No-Onebox` header is also checked in every response and the
onebox is blocked if the header is set to "1".
Additionally, Discourse will now include the `Discourse-No-Onebox`
header with every response if the site requires login to access content.
This is done to signal to a Discourse instance that it shouldn't attempt
to onebox other Discourse instances if they're login-only. Non-Discourse
websites can also use include that header if they don't wish to have
Discourse onebox their content.
Internal ticket: t59305.
The order of tags in the validation error message could be random, which we don't really care about, but it made the specs flake out once in a while.
The flaky specs were:
```
spec/lib/discourse_tagging_spec.rb:511
spec/lib/discourse_tagging_spec.rb:519
```
The user can select what happens with a bookamrk after it expires. New
option allow bookmark's reminder to be kept even after it has expired.
After a bookmark's reminder notification is created, the reminder date
will be highlighted in red until the user resets the reminder date.
User can do that using the new Clear Reminder button from the dropdown.
The search_ignore_accents site setting can be used to make the search
indexer remove the accents before indexing the content. The unaccent
function from PostgreSQL is better than Ruby's unicode_normalize(:nfkd).
when bundler is loaded, it sets the `RUBYOPT` environment variable to setup bundler. However, it was causing weird errors like the following when we try to install
custom plugin gems into a specific directory.
```
/home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/source/git.rb:214:in `rescue in load_spec_files': https://github.com/discourse/mail.git is not yet checked out. Run `bundle install` first. (Bundler::GitError)
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/source/git.rb:210:in `load_spec_files'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/source/path.rb:107:in `local_specs'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/source/git.rb:178:in `specs'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/lazy_specification.rb:88:in `__materialize__'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/spec_set.rb:75:in `block in materialize'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/spec_set.rb:72:in `map!'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/spec_set.rb:72:in `materialize'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/definition.rb:468:in `materialize'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/definition.rb:190:in `specs'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/definition.rb:238:in `specs_for'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/runtime.rb:18:in `setup'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler.rb:151:in `setup'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/setup.rb:20:in `block in <top (required)>'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/ui/shell.rb:136:in `with_level'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/ui/shell.rb:88:in `silence'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/setup.rb:20:in `<top (required)>'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/site_ruby/2.7.0/rubygems/core_ext/kernel_require.rb:85:in `require'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/site_ruby/2.7.0/rubygems/core_ext/kernel_require.rb:85:in `require'
```
Some product pages on Amazon are using a new HTML structure, meaning the previous Onebox engine was unable to gather the price and/or description. This change should allow these pages to be Oneboxed.
This PR adds an extra description to the 2FA page when granting a user admin access. It also introduces a general system for adding customized descriptions that can be used by future actions.
(Follow-up to dd6ec65061)
* DEV: Show only top level replies
Adds a new query param to the topic view so that we can filter out posts
that aren't top level replies. If a post is a reply to another post
instead of the original topic post we should not include it in the
response if the `filter_top_level_replies` query param is present.
* add rspec test
`Dir.glob` doesn't guarantee any particular order for results. However, it does appear to be consistent on a given machine. This means that specs can consistently pass on one machine while consistently failing on another. This can lead to some very confusing situations!
This commit sorts the spec files alphabetically so that load order is consistent across environments.
Note that the order in which tests are **run** is not affected by this change. Run order is still randomized by RSpec
This allows text editors to use correct syntax coloring for the heredoc sections.
Heredoc tag names we use:
languages: SQL, JS, RUBY, LUA, HTML, CSS, SCSS, SH, HBS, XML, YAML/YML, MF, ICS
other: MD, TEXT/TXT, RAW, EMAIL
```
warning: Passing a Node as the second parameter to Node.new is deprecated. Please pass a Document instead, or prefer an alternative constructor like Node#add_child. This will become an error in a future release of Nokogiri.
```
This commit introduces a new environment variable `RAISE_THEME_ERRORS`
that can control what happens when `theme:update` Rake task errors. It
can have three possible values: `0` to always print errors, `1` to
always raise on error, or be absent to use the default behavior which
raises errors only for default sites.
Previously email validations could fire when deleting posts if for
certain reasons any user validations fail on the user objects
This kind of condition could happen in core due to a corruption of a
user record, or via a plugin that introduces a new validation on User
* FEATURE: upload an avatar option for uploading avatars with selectable avatars
Allow staff or users at or above a trust level to upload avatars even when the site
has selectable avatars enabled.
Everyone can still pick from the list of avatars. The option to upload is shown
below the selectable avatar list.
refactored boolean site setting into an enum with the following values:
disabled: No selectable avatars enabled (default)
everyone: Show selectable avatars, and allow everyone to upload custom avatars
tl1: Show selectable avatars, but require tl1+ and staff to upload custom avatars
tl2: Show selectable avatars, but require tl2+ and staff to upload custom avatars
tl3: Show selectable avatars, but require tl3+ and staff to upload custom avatars
tl4: Show selectable avatars, but require tl4 and staff to upload custom avatars
staff: Show selectable avatars, but only allow staff to upload custom avatars
no_one: Show selectable avatars. No users can upload custom avatars
Co-authored-by: Régis Hanol <regis@hanol.fr>
This will allow consumers (e.g. the discourse-prometheus plugin) to separate topic-timings and message-bus requests. It also fixes the is_background boolean for subfolder sites.
Example error:
```
/__w/discourse/discourse/lib/tasks/assets.rake:3: warning: already initialized constant EMBER_CLI
/__w/discourse/discourse/lib/tasks/assets.rake:3: warning: previous definition of EMBER_CLI was here
```
This commit handles the edge case where a draft is lost with no warnings if the user edits the title (or category/tags) of a topic while they're replying.to the same topic. Repro steps are as follows:
1. Start replying to a topic and type enough to get a draft saved.
2. Scroll up to the topic title and click the pencil icon next to the topic title, change the title, category and/or tags, and then save the changes.
3. Reload the page and you'll see that the draft is gone.
This happens because we only allow 1 draft per topic per user and when you edit the title of a topic that you're replying to, from the server perspective it'll look like as if you've submitted your reply so it will advance the draft sequence for the topic and delete the draft.
The fix in this commit makes `PostRevisor` skip advancing the draft sequence when a topic's title is edited using the pencil button next to the title.
Internal ticket: t60854.
Co-authored-by: Robin Ward <robin.ward@gmail.com>
This option will make it so the [quote] bbcode will always
include the HTML link to the quoted post, even if a topic_id
is not provided in the PrettyText#cook options. This is so
[quote] bbcode can be used in other places, like chat messages,
that always need the link and do not have an "off-topic" ID
to use.
Revert "BUGFIX: use a more widely compatible version of sadd"
This reverts commit aa577f11fd.
I think the compatibility might not be a problem anymore, after 8 years? 😃
The default of 1Mb was preventing some valid Onebox requests from successfully completing.
Increasing this to 5Mb should reduce the number of unexpected failures.
Since we already have perfectly sensible logic for validating email addresses,
let's leverage that and simplify the logic while we're at it.
Emails with spaces are no longer permitted (why were they?)
We validate the *format* of email addresses in many places with a match against
a regex, often with very slightly different syntax.
Adding a separate EmailAddressValidator simplifies the code in a few spots and
feels cleaner.
Deprecated the old location in case someone is using it in a plugin.
No functionality change is in this commit.
Note: the regex used at the moment does not support using address literals, e.g.:
* localpart@[192.168.0.1]
* localpart@[2001:db8::1]
Themes often cache `nil` values in a DistributedCache. This bug meant that we were re-calculating some values on every request, AND triggering message-bus publishing on every request.
This fix should provide a significant performance improvement for busy sites.
2FA support in Discourse was added and grown gradually over the years: we first
added support for TOTP for logins, then we implemented backup codes, and last
but not least, security keys. 2FA usage was initially limited to logging in,
but it has been expanded and we now require 2FA for risky actions such as
adding a new admin to the site.
As a result of this gradual growth of the 2FA system, technical debt has
accumulated to the point where it has become difficult to require 2FA for more
actions. We now have 5 different 2FA UI implementations and each one has to
support all 3 2FA methods (TOTP, backup codes, and security keys) which makes
it difficult to maintain a consistent UX for these different implementations.
Moreover, there is a lot of repeated logic in the server-side code behind these
5 UI implementations which hinders maintainability even more.
This commit is the first step towards repaying the technical debt: it builds a
system that centralizes as much as possible of the 2FA server-side logic and
UI. The 2 main components of this system are:
1. A dedicated page for 2FA with support for all 3 methods.
2. A reusable server-side class that centralizes the 2FA logic (the
`SecondFactor::AuthManager` class).
From a top-level view, the 2FA flow in this new system looks like this:
1. User initiates an action that requires 2FA;
2. Server is aware that 2FA is required for this action, so it redirects the
user to the 2FA page if the user has a 2FA method, otherwise the action is
performed.
3. User submits the 2FA form on the page;
4. Server validates the 2FA and if it's successful, the action is performed and
the user is redirected to the previous page.
A more technically-detailed explanation/documentation of the new system is
available as a comment at the top of the `lib/second_factor/auth_manager.rb`
file. Please note that the details are not set in stone and will likely change
in the future, so please don't use the system in your plugins yet.
Since this is a new system that needs to be tested, we've decided to migrate
only the 2FA for adding a new admin to the new system at this time (in this
commit). Our plan is to gradually migrate the remaining 2FA implementations to
the new system.
For screenshots of the 2FA page, see PR #15377 on GitHub.
When parent category or grandparent category is muted, then category should be muted as well.
Still, it can be overridden by setting individual subcategory notification level.
CategoryUser record is not created, mute for subcategories is purely virtual.
These calls were originally introduced to ensure that any stale users were cleaned up regularly. This is quite an expensive process to run on every `GET /presence/get` call, and will also cause errors during readonly mode.
Since the original introduction of this logic, we added the `Jobs::PresenceChannelAutoLeave` which runs every minute. That should be enough to clean up any stale users.
Note that users which explicitly `leave` a channel are still removed immediately. This auto_leave logic just takes care of clients which have disappeared without leaving.
This commit introduces two new APIs for handling unused uploads, one
can be used to exclude uploads in bulk when the data model allow and
the other one excludes uploads one by one.
We added this constraint in 5bd55acf83
but it is causing problems in hosted sites and is catching the
issue too far down the line. This commit removes the constraint
for now, and also fixes an issue found with PostDestroyer
which wasn't using the UserStatCountUpdater when updating post_count
and thus was causing negative numbers to occur.
Whenever we got a bounced email in the Email::Receiver we
previously would just set bounced: true on the EmailLog and
discard the status/diagnostic code. This commit changes this
flow to store the bounce error code (defined in the RFC at
https://www.iana.org/assignments/smtp-enhanced-status-codes/smtp-enhanced-status-codes.xhtml)
not just in the Email::Receiver, but also via webhook events
from other mail services and from SNS.
This commit does not surface the bounce error in the UI,
we can do that later if necessary.
To make this possible in development mode, the `sourceURL=` implementation needs to include something plugin-specific. This has no effect on production.
The asset version is bumped in order to trigger a re-compilation of plugin JS assets.
Without this parameter, requests for sourcemaps on shared-CDN multisites will not be routed to the correct database, resulting in a 404.
The stylesheet content now depends on the site hostname, so the hostname has been added to the digest.
The `assets:precompile` rake task loads the full Ruby app, which can consume around 500mb of RAM by itself. Using `exec` to run `ember build` allows us to free up the Ruby memory and make more space for `ember build`
This makes a small improvement to 'cold cache' ember-cli build times, and a large improvement to 'warm cache' build times
The ember-auto-import update means that vendor is now split into multiple files for efficiency. These are named `chunk.*`, and should be included immediately after the `vendor.js` file. This commit also updates the rails app to render script tags for these chunks.
This change was previously merged, and caused memory-related errors on RAM-constrained machines. This was because Webpack 5 switches from multiple worker processes to a single multi-threaded process. This meant that it was hitting node's default heap size limit (~500mb on a 1GB RAM server). Discourse's standard install procedure recommends adding 2GB swap to 1GB-RAM machines, so we can afford to override's Node's default via the `--max-old-space-size` flag.
The chat quoting mechanism will need to be able to generate
markdown for all kinds of uploads. The UploadMarkdown class
was missing generation for video and audio uploads. This
commit adds that in, and also expands the server-side regex
recognition of FileHelper types to match those in uploads.js,
and adds a spec for UploadMarkdown
When a site has secure media enabled and a post is with secure
media, we were incorrectly cooking custom emoji URLs and using the
secure URL for those emojis, even though they should not be
considered secure (their corresponding upload records in the
database are _not_ secure). Now instead of the blanket
post.with_secure_media? boolean for the secure: param, we also
want to make sure the image whose URL is being cooked is also
_not_ a custom emoji.
This will allow pretty text deprecations / errors / warnings to appear in the Rails logs, rather than disappearing silently.
(implementation adapted from `discourse_js_processor.rb`)
This is intended for use by plugins which are building their own
topic lists, and want to include PMs alongside regular topics (e.g.
discourse-assign). It does not get used directly in core.
Redis supports deleting multiple keys at once using the `del` command and so does the `redis` gem: 21ec1dec06/lib/redis/commands/keys.rb (L188-L193). However, our wrapper around the `del` method currently accepts only one argument and expects it to be a string so it's impossible to delete multiple keys at once.
This PR changes the signature of the `DiscourseRedis#del` method so it accepts any number of arguments and makes sure all keys are properly namespaced before calling the `del` implementation of the `redis` gem.
Breakdown of fixes in this commit:
* `UserStat#topic_count` was not updated when visibility of
the topic changed.
* `UserStat#post_count` was not updated when post was hidden or
unhidden.
* `TopicConverter` was only incrementing or decrementing the counts by 1
even if a user has multiple posts in the topic.
* The commit turns off the verbose logging by default as it is just
noise to normal users who are not debugging this problem.
Ember CLI gives sourcemaps their own digest. Our `s3.rake` logic assumes that the digest portion of sourcemap filenames remains the same.
The Ember CLI sourcemaps are included in the manifest file, so we can ensure they are uploaded by letting them past the MiniMime check.
Followup to abefb1beff
If no path is supplied, browsers will look for the map on the same path as the JS file itself. This fixes two problems that we see in production:
1. When compiling assets against one CDN, and then re-using them on a site with a different CDN, the sourceMappingUrls would be incorrect and print warnings in the console
2. If both an S3 CDN and an app CDN are configured, we were using the S3 CDN for the JS and the app CDN for the map. This commit will make sure we use the S3 CDN for both.
ember-cli already runs terser on its output. Running it through again provides no benefit, takes longer, and also breaks source mapping of these assets in production.
This commits adds a new advance_draft to PostCreator that controls if
the draft sequence will be advanced or not. If the draft sequence is
advanced then the old drafts will be cleared. This used to happen for
posts created by plugins or through the API and cleared user drafts
by mistake.
* FEATURE: Add external_id to topics
This commit allows for topics to be created and fetched by an
external_id. These changes are API only for now as there aren't any
front changes.
* add annotations
* add external_id to this spec
* Several PR feedback changes
- Add guardian to find topic
- 403 is returned for not found as well now
- add `include_external_id?`
- external_id is now case insensitive
- added test for posts_controller
- added test for topic creator
- created constant for max length
- check that it redirects to the correct path
- restrain external id in routes file
* remove puts
* fix tests
* only check for external_id in webhook if exists
* Update index to exclude external_id if null
* annotate
* Update app/controllers/topics_controller.rb
We need to check whether the topic is present first before passing it to the guardian.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* Apply suggestions from code review
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* FEATURE: RS512, RS384 and RS256 COSE algorithms
These algorithms are not implemented by cose-ruby, but used in the web
authentication API and were marked as supported.
* FEATURE: Use all algorithms supported by cose-ruby
Previously only a subset of the algorithms were allowed.
This can be disabled by setting `EMBER_CLI_PROD_ASSETS=0`, but this option will not be available for long. If your theme/plugin/site has issues under Ember CLI, please open a topic on https://meta.discourse.org
This allows plugins to override the permissions required to access
specific things like the Logster and Sidekiq web UI without the changes
leaking to the rest of Discourse routes.
Our discourse_public_exceptions middleware is designed to catch bubbled exceptions from lower in the stack, and then use `ApplicationController.rescue_with_handler` to render an appropriate error response.
When the request itself is invalid, we had an escape-hatch to skip re-dispatching the request to ApplicationController. However, it was possible to work around this by 'layering' the errors. For example, if you made a request which resulted in a 404, but **also** had some other invalidity, the escape hatch would not be triggered.
This commit ensures that these kind of 'layered' errors are properly handled, without logging warnings. It also adds detection for invalid JSON bodies and badly-formed multipart requests.
The user-facing behavior is unchanged. This commit simply prevents warnings being logged for invalid requests.
Ensures that `UserStat#post_count` and `UserStat#topic_count` does not
go below 0. When it does like it did now, we tend to have bugs in our
code since we're usually coding with the assumption that the count isn't
negative.
In order to support the constraints, our post and topic fabricators in
tests will now automatically increment the count for the respective
user's `UserStat` as well. We have to do this because our fabricators
bypasss `PostCreator` which holds the responsibility of updating `UserStat#post_count` and
`UserStat#topic_count`.
* Chinese segmenetation will continue to rely on cppjieba
* Japanese segmentation will use our port of TinySegmenter
* Korean currently does not rely on segmentation which was dropped in c677877e4f
* SiteSetting.search_tokenize_chinese_japanese_korean has been split
into SiteSetting.search_tokenize_chinese and
SiteSetting.search_tokenize_japanese respectively
Sometimes, the 'message' portion of an exception isn't enough to work out what's happening. In these cases, including the exception class name can help with debugging.
Job arguments go via JSON, and so symbols will appear as strings in the Job's `#execute` method. The latest version of Sidekiq has started warning about this to reduce developer confusion.
Most of our logging goes through Rails.logger, and therefore appears in Logster at `/logs` on a site. The Sidekiq logger was bypassing this and writing directly to STDERR.
Unfortunately it's not possible to do `Sidekiq.logger = Rails.logger` because `Sidekiq#logger=` applies a number of patches to the logger instance, causing our whole logging system to break.
Instead, this commit adds a dedicated Logger instance with no output, which is then patched to forward all messages directly to `Rails.logger`
- Limit bulk re-invite to 1 time per day
- Move bulk invite by csv behind a site setting (hidden by default)
- Bump invite expiry from 30 -> 90 days
## Updates to rate_limiter
When limiting reinvites I found that **staff** are never limited in any way. So I updated the **rate_limiter** model to allow for a few things:
- add an optional param of `staff_limit`, which (when included and passed values, and the user passes `.staff?`) will override the default `max` & `secs` values and apply them to the user.
- in the case you **do** pass values to `staff_limit` but the user **does not** pass `staff?` the standard `max` & `secs` values will be applied to the user.
This should give us enough flexibility to
1. continue to apply a strict rate limit to a standard user
2. but also apply a secondary (less strict) limit to staff
This adapter ensures that MiniSql locks the ActiveRecord mutex before using the raw PG connection. This ensures that multiple threads will not attempt to use the same connection simultaneously.
This commit also removes the schema_cache_concurrency freedom-patch, which is no longer required now that cross-thread connection use is controlled by the mutex.
For the original root cause of this issue, see https://github.com/rails/rails/pull/38577
When creating a direct message to a group with group SMTP
set up, and adding another person to that message in the OP,
we send an email to the second person in the OP via the group_smtp
job. This in turn creates an IncomingEmail record to guard against
IMAP double sync.
The issue with this was that this IncomingEmail (which is essentialy
a placeholder/dummy one) was having its Message-ID used as the canonical
References Message-ID for subsequent emails sent out to user_private_message
recipients (such as members of the group), causing threading issues in
the mail client. The canonical <topic/ID@HOST> format should be used
instead for these cases.
This commit fixes the issue by only using the IncomingEmail for the
OP's Message-ID if the OP was created via our handle_mail email receiver
pipeline. It does not make sense to use it in other cases.
In an earlier PR, we decided that we only want to block a domain if
the blocked domain in the SiteSetting is the final destination (/t/59305). That
PR used `FinalDestination#get`. `resolve` however is used several places
but blocks domains along the redirect chain when certain options are provided.
This commit changes the default options for `resolve` to not do that. Existing
users of `FinalDestination#resolve` are
- `Oneboxer#external_onebox`
- our onebox helper `fetch_html_doc`, which is used in amazon, standard embed
and youtube
- these folks already go through `Oneboxer#external_onebox` which already
blocks correctly
Sometimes plugins need to have additional data or options available
when rendering custom markdown features/rules that are not available
on the default opts.discourse object. These additional options should
be namespaced to the plugin adding them.
```
Site.markdown_additional_options["chat"] = { limited_pretty_text_markdown_rules: [] }
```
These are passed down to markdown rules on opts.discourse.additionalOptions.
The main motivation for adding this is the chat plugin, which currently stores
chat_pretty_text_features and chat_pretty_text_markdown_rules on
the Site object via additions to the serializer, and the Site object is
not accessible to import via markdown rules (either through
Site.current() or through container.lookup). So, to have this working
for both front + backend code, we need to attach these additional options
from the Site object onto the markdown options object.
Running `update_from_remote` and `save!` cause a number of side-effects, including instructing all clients to reload CSS files. If there are no changes, then this is wasteful, and can even cause a 'flicker' effect on clients as they reload CSS.
This commit checks if any updates are available before triggering `update_from_remote` / `save!`. This should be much faster, and stop the 'flickering' UX from happening on every themes:update run.
It also improves the output of the command to include the from/to commit hashes, which may be useful for debugging issues. For example:
```
Checking 'Alien Night | A Dark Discourse Theme' for 'default'... already up to date
Checking 'Star Wars' for 'default'... updating from d8a170dd to 66b9756f
Checking 'Media Overlay' for 'default'... already up to date
```
`account_created` email contains a URL to `/u/password-reset/TOKEN`
which means that the correct scope for the email token is
`password_reset`, not `signup`.
Our previous implementation used a simple `blocked_domain_array.include?(hostname)`
so some values were not matching. Additionally, in some configurations like ours, we'd used
"cat.*.dog.com" with the assumption we'd support globbing.
This change implicitly allows globbing by blocking "http://a.b.com" if "b.com" is a blocked
domain but does not actively do anything for "*".
An upcoming change might include frontend validation for values that can be inserted.
* FIX: Mark invites flash messages as HTML safe.
This change should be safe as all user inputs included in the errors are sanitized before sending it back to the client.
Context: https://meta.discourse.org/t/html-tags-are-explicit-after-latest-update/214220
* If somebody adds a new error message that includes user input and doesn't sanitize it, using html-safe suddenly becomes unsafe again. As an extra layer of protection, we make the client sanitize the error message received from the backend.
* Escape user input instead of sanitizing
For now this is still gated behind a `QUNIT_EMBER_CLI=1` environment variable, but will eventually become the default so that we can remove `run-qunit.js`.
If the SiteSetting `allowed_onebox_iframes` contains a value of `*`, it will use the values of `all_iframe_origins` during the Oneboxing process. If `all_iframe_origins` itself contains a value of `*`, `origins_to_regexes` will try to return a "catch-all" regex.
Other code assumes `origins_to_regexes`will return an array, so this change ensures the `*` case will return an array containing only the catch-all regex.
1. `html_doc.css('.Box.md')` always returns a truthy value (e.g. `[]`) so the second branch of the if-elsif never ran
2. `node&.css('text()')` was invalid code that would raise an error
3. Matching on h3 elements is no longer correct with the current html structure returned by GitHub
This reverts commit 2c7906999a.
The changes break some things in local development (putting JS files
into minified files, not allowing debugger, and others)
This reverts commit ea84a82f77.
This is causing problems with `/theme-qunit` on legacy, non-ember-cli production sites. Reverting while we work on a fix
This is quite complex as it means that in production we have to build
Ember CLI test files and allow them to be used by our Rails application.
There is a fair bit of glue we can remove in the future once we move to
Ember CLI completely.
The `plugin:pull_compatible_all` task is intended to take incompatible plugins and downgrade them to an earlier version. Problem is, when running the rake task in development/production environments, the plugins have already been activated. If an incompatible plugin raises an error in `plugin.rb` then the rake task will be unable to start.
This commit centralises our LOAD_PLUGINS detection, adds support for LOAD_PLUGINS=0 in dev/prod, and adds a warning to `plugin:pull_compatible_all` if it's run with plugins enabled.
This commit extends the options which can be passed to
`PrettyText.markdown` so that which Markdown-it rules and Discourse
Markdown plugins to be used when rendering a text can be customizable.
Currently, this extension is mainly used by plugins.
Having to load `ip_addr` is confusing especially when that file exists
to monkey patch Ruby's `IpAddr` class. Moving it to our freedom patches
folder which is automatically loaded on initialization.
Also:
* Remove an unused method (#fill_email)
* Replace a method that was used just once (#generate_username) with `SecureRandom.alphanumeric`
* Remove an obsolete dev puma `tmp/restart` file logic
* File.exists? is deprecated and removed in Ruby 3.2 in favor of
File.exist?
* Dir.exists? is deprecated and removed in Ruby 3.2 in favor of
Dir.exist?
The rake task deleted here was added back in Feb 2020
when bookmarks were first converted from PostAction
records, it is no longer needed. The ignored columns
were removed in ed83d7573e.
This commit adds a check that runs regularly as per
2d68e5d942 which tests the
credentials of groups with SMTP or IMAP enabled. If any issues
are found with those credentials a high priority problem is added to the
admin dashboard.
This commit also formats the admin dashboard differently if
there are high priority problems, bringing them to the top of
the list and highlighting them.
The problem will be cleared if the issue is fixed before the next
problem check, or if the group's settings are updated with a valid
credential.
I plan to use this in an upcoming discourse-reactions PR, where I want to like a post without notifying the user, so I can instead create a reaction notification.
Additionally, we decouple the a11y attributes from the icon itself, which will let us extend the widget's icon without losing them.
This allows authenticators to instruct the Auth::Result to override attributes without using the general site settings. This provides an easy migration path for auth plugins which offer their own "overrides email", "overrides username" or "overrides name" settings. With this new api, they can set `overrides_*` on the result object, and the attribute will be overriden regardless of the general site setting.
ManagedAuthenticator is updated to use this new API. Plugins which consume ManagedAuthenticator will instantly take advantage of this change.
This commit adds API documentation for the new upload
endpoints related to direct + multipart external uploads.
Also included is a rake task which watches the files in
the spec/requests/api directory and calls a script file
(spec/regenerate_swagger_docs) whenever one changes. This
script runs rake rswag:specs:swaggerize and then copies
the openapi.yml file over to the discourse_api_docs repo
directory, and hits a script there to convert the YML to
JSON so the API docs are refreshed while the server is
still running. This makes the loop of making a doc change
and seeing it in the local server much faster.
The rake task is rake autospec:swagger
This commit removes jQuery file uploader from Discourse,
completing the transition to Uppy. The image-uploader
and UploadMixin components are also removed in this commit
as they have already been replaced and are the only things
using jQuery file upload.
.-'~~~`-.
.' `.
| R I P |
| jquery |
| file |
| upload |
| |
\\| 2013-2021 |//
-----------------
Now that d5e380e5c1 has been
committed there is nothing in the codebase that uses either
resumable.js or the old backup-uploader component.
R.I.P resumable.js
This commit introduces scheduled problem checks for the admin dashboard, which are long running or otherwise cumbersome problem checks that will be run every 10 minutes rather than every time the dashboard is loaded. If these scheduled checks add a problem, the problem will remain until it is cleared or until the scheduled job runs again.
An example of a check that should be scheduled is validating credentials against an external provider.
This commit also introduces the concept of a `priority` to the problems generated by `AdminDashboardData` and the scheduled checks. This is `low` by default, and can be set to `high`, but this commit does not change any part of the UI with this information, only adds a CSS class.
I will be making a follow up PR to check group SMTP credentials.
When attempting to Onebox a page if there is no `meta property="og:description"` tag but there is a `meta name="description"` tag, Onebox should try to use that value.
Discourse sent only translation overrides for the current language to the client instead of sending overrides from fallback locales as well. This especially impacted en_GB -> en since most overrides would be done in English instead of English (UK).
This also adds lots of tests for previously untested code.
There's a small caveat: The client currently doesn't handle fallback locales for MessageFormat strings. That is why overrides for those strings always have a higher priority than regular translations. So, as an example, the lookup order for MessageFormat strings in German is:
1. override for de
2. override for en
3. value from de
4. value from en
As an example, the lookup order for German was:
1. override for de
2. override for en
3. value from de
4. value from en
After this change the lookup order is the same as on the client:
1. override for de
2. value from de
3. override for en
4. value from en
see /t/16381
A plugin API that allows customizing existing topic-backed static pages, like:
faq, tos, privacy (see: StaticController) The block passed to this
method has to return a SiteSetting name that contains a topic id.
```
add_topic_static_page("faq") do |controller|
current_user&.locale == "pl" ? "polish_faq_topic_id" : "faq_topic_id"
end
```
You can also add new pages in a plugin, but remember to add a route,
for example:
```
get "contact" => "static#show", id: "contact"
```
The discourse base image already contains a postgres installation, so pulling a separate postgres image is a little wasteful. Using the copy of Postgres in the discourse image saves about 20 seconds on every GitHub actions run.
This commit sets up Postgres with a few performance-improving flags, which we were already using for the `rake docker:test` task (used on our internal CI system).
If a theme name contained a double-quote, this problem could lead to invalid/unexpected HTML in the `<head>`
Note that this is not considered a security issue because themes can only be installed/named by administrators, and themes/administrators already have the ability to run arbitrary javascript.
We can fake redis transactions so that `fab!` works for redis and PG
data, but it's too slow to be used indiscriminately. Instead, you can
opt into it with the `use_redis_snapshotting` helper.
Insofar as snapshotting allows us to `fab!` more things, it provides a
speedup.
OAuth2Authenticator is considered deprecated, and isn't used in core. However, some plugins still depend on it, and this was breaking the signup of previously-staged users. There is no easy way to make an end-end test of this in core, but I will be adding an integration test in the SAML plugin.
This is a fix to address blurry onebox favicon images if the site you
are linking to happens to have a favicon.ico file that contains multiple
images.
This fix detects of we are trying to create an upload for a favicon.ico
file. We then convert it to a png and not a jpeg like we were doing. We
want a png because it will preserve transparency, otherwise if we
convert it to a jpeg we lose that and it looks bad on dark themed sites.
This fix also addresses the fact that .ico files can include multiple
images. The blurry images we were producing was caused by the
ImageMagick `-flatten` option when the .ico file had multiple images
which then squishes them all together. So for .ico files we are no
longer flattening them and instead we are grabbing the last image in the
.ico bundle and converting that single image to a png.
We previously used ConsolidateNotifications with a threshold of 1 to re-use an existing notification and bump it to the top instead of creating a new one. It produces some jumpiness in the user notification list, and it relies on updating the `created_at` attribute, which is a bit hacky.
As a better alternative, we're introducing a new plan that deletes all the previous versions of the notification, then creates a new one.
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
Since 3b13f1146b the email threading
in mail clients has been broken, because the random suffix meant
that the References header would always be different for non-group
SMTP email notifications sent out.
This commit fixes the issue by always using the "canonical" topic
reference ID inside the References header in the format:
topic/TOPIC_ID@HOST
Which was the old format. We also add the References header to
notifications sent for the first post arriving, so the threading
works for subsequent emails. The Message-ID header is still random
as per the previous change.
Currently we display pending posts in topics (both for author and staff
members) but the feature is only enabled when there’s an enabled global site
setting related to moderation.
This patch allows to have the same behavior for a site where there’s
nothing enabled globally but where a moderated category exists. So when
browsing a topic of a moderated category, the presence of pending posts
will be checked whereas nothing will happen in a normal category.
Currently the Message-IDs we send out for outbound email
are not unique; for a post they look like:
topic/TOPIC_ID/POST_ID@HOST
And for a topic they look like:
topic/TOPIC_ID@HOST
This commit changes the outbound Message-IDs to also have
a random suffix before the host, so the new format is
like this:
topic/TOPIC_ID/POST_ID.RANDOM_SUFFIX@HOST
Or:
topic/TOPIC_ID.RANDOM_SUFFIX@HOST
This should help with email deliverability. This change
is backwards-compatible, the old Message-ID format will
still be recognized in the mail receiver flow, so people
will still be able to reply using Message-IDs, In-Reply-To,
and References headers that have already been sent.
This commit also refactors Message-ID related logic
to a central location, and adds judicious amounts of
tests and documentation.
David Taylor
Penar Musaraj
Loïc Guitaut
Roman Rizzi
ValdikSS
Jarek Radosz
Martin Brennan
Isaac Janzen
Joffrey JAFFEUX
Gerhard Schlager
Osama Sayegh
Rafael dos Santos Silva
Sam
Alan Guo Xiang Tan
Bianca Nenciu
Neil Lalonde
Dan Ungureanu
Vinoth Kannan
jbrw
Arpit Jalan
Blake Erickson
Jeff Wong
tshenry
Michael Brown
Krzysztof Kotlarek
Andrei Prigorshnev
Noah Gibbs
Natalie Tay
Martin Brennan
jbrw
Robin Ward
Peter Zhu
Bianca Nenciu
Dax74
Daniel Waterworth
Angus McLeod