Previously it was using various willTransition and didTransition hooks
which can be quite fragile, especially when removing the
intermediate loading state.
This PR allows entering a float value for topic timers e.g. 0.5 for 30 minutes when entering hours, 0.5 for 12 hours when entering days. This is achieved by adding a new column to store the duration of a topic timer in minutes instead of the ambiguous both hours and days that it could be before.
This PR has ommitted the post migration to delete the duration column in topic timers; it will be done in a subsequent PR to ensure that no data is lost if the UPDATE query to set duration_mintues fails.
I have to keep the old keyword of duration in set_or_create_topic_timer for backwards compat, will remove at a later date after plugins are updated.
Some plugins (like discourse-calendar) import things from `@ember/string` and `rsvp`, so we need to add them in order for the plugins to work with Ember CLI.
If a list of email addresses is pasted into a group’s Add Members form
that has one or more email addresses of users who already belong to the
group and all other email addresses are for users who do not yet exist
on the forum then no invites were being sent. This commit ensures that
we send invites to new users.
This is a try to simplify logic around dismiss new topics to have one solution to work in all places - dismiss all-new, dismiss new in a specific category or even in a specific tag.
This moves all the rate limiting for user second factor (based on `params[:second_factor_token]` existing) to the one place, which rate limits by IP and also by username if a user is found.
This encompasses a lot of work done over the last year, much of which
has already been merged into master. This is the final set of changes
required to get Ember CLI running locally for development.
From here on it will be bug fixes / enhancements.
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Co-authored-by: romanrizzi <rizziromanalejandro@gmail.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Co-authored-by: romanrizzi <rizziromanalejandro@gmail.com>
A more general, lower-level change in addition to #11950.
Most code paths already check if SSO is enabled or if local logins are disabled before trying to create an email invite.
This is a safety net to ensure no invalid invites sneak by.
Also includes:
FIX: Don't allow to bulk invite when SSO is on (or when local logins are disabled)
This mirrors can_invite_to_forum? and other email invite code paths.
Issue originally reported in https://meta.discourse.org/t/bypass-sso-by-adding-unkown-email-to-group/177339
Inviting people via email address to a group when SSO is enabled (or local logins are disabled) led to a situation where user records were being created bypassing single sign-on.
We already prevent that in most places. This adds required checks to `GroupsController`.
* FIX: In FastImage 2.2.2 an error is raised with a `nil` path
Sometimes Discourse.store.path_for would return `nil`, which the job
handled gracefully before, but raises an error with the new version of
the gem.
Note the logic of this job is a bit awkward since it depends on `nil`
being a string, but at least now it's no longer filling logs with
errors.
* Update app/jobs/onceoff/fix_invalid_gravatar_uploads.rb
Co-authored-by: Bianca Nenciu <nbianca@users.noreply.github.com>
Co-authored-by: Bianca Nenciu <nbianca@users.noreply.github.com>
It was introduced in c82b2dcc24, but since b76731d722 and 58ee947b35 it's a single-option dropdown, so there's no need to show it (and keep it) instead of a button. We use a button for non-admins already.
This pull requests contains a series of improvements to groups
settings and member management such as:
- Showing which users have set a group as primary
- Moving similar settings together under Effects
- Adding bulk select and actions to members page
This PR revamps the topic timer UI, using the time shortcut selector from the bookmark modal.
* Fixes an issue where the duration of hours/days after last reply or auto delete replies was not enforced to be > 0
* Fixed an issue where the timer dropdown options were not reloaded correctly if the topic status changes in the background (use `MessageBus` to publish topic state in the open/close timer jobs)
* Moved the duration input and the "based on last post" option from the `future-date-input` component, as it was only used for topic timers. Also moved out the notice that is displayed which was also only relevant for topic timers.
To prevent opaque cache files, now all the CDN files will be requested in 'cors' mode if the cdn_cors_enabled global setting is enabled. Before enabling the setting, should enable the cors in the CDN server by adding the response header `access-control-allow-origin: *` or `access-control-allow-origin: https://discourse.example.com.`
And other external file requests other than CDN will not be cached if the response type is opaque.
This PR makes it so the bookmark name shows on hover in the quick access menu. A change was necessary to quick-access-item for the title to render for the link.
Disabling shared drafts used to leave topics in an inconsistent state
where they were not displayed as shared drafts and thus there was no
way of publishing them. Moreover, they were accessible just to users
who have permissions to create shared drafts.
This commit adds another permission check that is used for most
operations and the old can_create_shared_draft? remains used just when
creating a new shared draft.
This PR is the first step towards replacing our `{{user-selector}}` and eventually deprecating and removing it from our codebase. Some of `{{user-selector}}` problems are:
1. It's called `{{user-selector}}`, but in reality in can also select groups and emails.
2. It's an Ember component, yet it doesn't have a handlebars template and uses jQuery to render itself and modify the DOM. An example of this problem is when you want to clear the selected users programmatically, see [this](6c155dba77/app/assets/javascripts/discourse/app/components/user-selector.js (L179-L185)).
3. We now have select kit which does very similar things but a lot better.
This PR introduces `{{email-group-user-chooser}}` which is meant to replace `{{user-selector}}`. It extends select kit and has the same features that `{{user-selector}}` has. `{{user-selector}}` is still used in a few places in core, but they'll all be replaced with the new component in a separate commit.
Once `{{user-selector}}` is not used anywhere in core, it'll be deprecated and then removed after the 2.7 release.
Using "UrlHelper#absolute" returns the S3 URL, which is fine for the client because it modifies it to use the CDN instead. On the other hand, this replacement doesn't happen when the URL is server-side rendered, returning a 403 for the system's avatar.
* sometimes the AJAX promise to create/save the bookmark did
not come back before the component destroyed, causing an error
when trying to set the model id afterward. this just eliminates
the set code and uses the response.id instead
This PR moves all of the time picking functionality from the bookmark modal and controller into a reusable time-shortcut-picker component, which will be used for the topic timer UI revamp. All of the utility JS for getting dates like tomorrow/next week/next month etc. have also been moved into a separate utility lib.
The time-shortcut-picker has a couple of options that can be passed in:
* prefilledDatetime - The date and time to parse and prefill into the custom date and time section, useful for editing interfaces.
* onTimeSelected (callback) - Called when one of the time shortcuts is clicked, and passes the type of the shortcut (e.g. tomorrow) and the datetime selected.
* additionalOptionsToShow - An array of option ids to show (by default `later_today` and `later_this_week` are hidden)
* hiddenOptions - An array of option ids to hide
* customOptions - An array of custom options to display (e.g. the option to select a post date for the bookmarks modal). The options should have the below properties:
* id
* icon
* label (I18n key)
* time (moment datetime object)
* timeFormatted
* hidden
The other major work in this PR is moving all of the bookmark functionality out of the bookmark modal controller and into its own component, where it makes more sense to be able to access elements on the page via `document`. Tests have been added to accompany this move, and existing acceptance tests for bookmark are all passing.
* Quite a few Ember-CLI / Upgrade related changes
They should all be backwards compatible. This is all to help merge our
branches.
* REFACTOR: DRY up username validation
Also avoids overwriting computed properties for compatibility with newer
Ember releases.
Adds a new column/setting to groups, allow_unknown_sender_topic_replies, which is default false. When enabled, this scenario is allowed via IMAP:
* OP sends an email to the support email address which is synced to a group inbox via IMAP, creating a group topic
* Group user replies to the group topic
* An email notification is sent to the OP of the topic via GroupSMTPMailer
* The OP has several email accounts and the reply is sent to all of them, or they forward their reply to another email account
* The OP replies from a different email address than the OP (gloria@gmail.com instead of gloria@hey.com for example)
* The a new staged user is created, the new reply is accepted and added to the topic, and the staged user is added to the topic allowed users
Without allow_unknown_sender_topic_replies enabled the new reply creates an entirely new topic (because the email address it is sent from is not previously part of the topic email chain).
This PR adds security_last_changed_at and security_last_changed_reason to uploads. This has been done to make it easier to track down why an upload's secure column has changed and when. This necessitated a refactor of the UploadSecurity class to provide reasons why the upload security would have changed.
As well as this, a source is now provided from the location which called for the upload's security status to be updated as they are several (e.g. post creator, topic security updater, rake tasks, manual change).
Background: I wanted to see `categories.latest_by` translation in context in a live app but couldn't find it, so I traced it throughout the code.
My step-by-step reasoning for the removal is:
1. `categories-only` does not use `latestTopicOnly`, so there's no need to call it with that argument
2. `parent-category-row` is never called with `latestTopicOnly` argument, so the reference to that arg can be removed from its template
3. after that, `featured-topic` is now no longer ever called with `latestTopicOnly` argument (except in the `ghost` theme, but that's because its override of `categories-only` template 4e2fba963c/common/header.html (L119) is based on the old version of that template from core), so it seems safe to remove it there too (`categories.latest_by` i18n string is also no longer needed)
4. then, nothing is using `latestTopicOnly` anymore so it can be removed from `categories` hbs/js
I checked in each step that there are no plugins or themes (in all-the-plugins/all-the-themes) using those properties/arguments/strings.
This change fixes an issue with the user group chooser of a tag group's settings. It was impossible to clear any selected groups through the UI.
The `setPermissionsGroups` function determines which groups appear selected in the group-chooser based on the passed-in `groupIds` array.
It starts with `updatedPermissions` being set to the group permissions as they were prior to the action that called the function. From there, we were correctly adding a group permission to `updatedPermissions` whenever a group appeared in `groupIds`. This addressed newly added groups and also maintained any group permissions that had been set before. The problem was that there was no logic to remove a group permission when the associated group no longer appeared in `groupIds`. If a group isn't included in `groupIds`, we can simply attempt to delete an associated group permission if it exists.
The user summary's delete button UX relied on the "admin-user.js" destroy function, which was called through the "admin-tools" service. After #11724, we no longer put UX behavior on Ember models.
User title in the current-user header-dropdown was sometimes `title="null"` if user doesn’t have a name. This is fixed as part of this commit to improve accessibility of this part of the UI.
Not when doing a site-wide search like we do in the Directory.
This solves the following specfailure:
1) DirectoryItemsController with data finds user by name
Failure/Error: expect(json['directory_items'].length).to eq(1)
expected: 1
got: 0
(compared using ==)
# ./spec/requests/directory_items_controller_spec.rb:88:in `block (3 levels) in <main>'
# ./spec/rails_helper.rb:271:in `block (2 levels) in <top (required)>'
# ./bundle/ruby/2.7.0/gems/webmock-3.11.1/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
When doing a user search (eg. when mentioning a user) we will not prioritie
users who hasn't been seen in over a year.
REFACTOR the user-search specs to be more precise regarding the ordering
This cookie is only used during login. Having it persist after that can
cause some unusual behavior, especially for sites with short session
lengths.
We were already deleting the cookie following a new signup, but not for
existing users.
This commit moves the cookie deletion logic out of the erb template, and
adds logic and tests to ensure it is always deleted consistently.
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Lots of changes but it's mostly a refactoring.
The interesting part that was fix are the 'load_problem_<model>_ids' methods.
They will now return records with no search data associated so they can be properly indexed for the search.
This "bad" state usually happens after a migration.
The bug was mentioned on [meta](https://meta.discourse.org/t/two-bugs-with-usernames-starting-with-subfolder-name/169505)
When discourse is installed on `/subfolder` and username is containing subfolder name like for example `subfolderadmin` - user URLs were incorrect.
Instead of having `/subfolder/u/subfolderadmin/summary/` we were leading to `/subfolder/uadmin/summary`.
The reason for that was incorrect check in `getUrl` helper:
```javascript
const found = url.indexOf(baseUri);
if (found >= 0 && found < 3) {
return url;
}
return baseUri + url;
```
baseUri is `/subfolder`, url is `/u/subfolderadmin` and indexOf returned position which in the end returned incorrect URL.
I think that we should check if the URL starts with baseUri and not if contains baseUri.
We only want to warn admins when both settings are enabled. When "set locale from accept language header" setting is enabled, the user locale will be set based on the header when they register an account on the site, which could be confusing.
Improvements to make console access to IncomingEmail more pleasant, and stopping certain IMAP logs from landing in the DB because they just create too much noise,
- Improve warning message.
- Only display the warning if the language has a fallback and either "allow_user_locale", or "set_locale_from_accept_language_header" are enabled.
"I18n.t(key, locale: locale)" fails to find the correct translation in some cases. We should always wrap it with the "I18n.with_locale(locale)" method.
Also, reverting an override wasn't always possible because the serializer always used "I18n.locale" as the locale.
- The icon for the “view all” controls in the panels have no accessible alternative.
- Because the “Log Out” and "Do Not Disturb" elements in the preferences tab are an <a> element without an href attribute, it is not keyboard focusable and therefore not keyboard focusable. Use a button element instead.
* FEATURE: Give user menu icons alt attributes
This commit gives user menu icons + notifications alt attributes
* UI: Use Translations
This commit refactors the code injecting alt tags to the icons to use translations instead of hard-coded text.
* FIX: Add correct syntax for aria-label + role
This commit adds the correct accessibility syntax to the tab icons + notification icons.
This adds a new table UserNotificationSchedules which stores monday-friday start and ends times that each user would like to receive notifications (with a Boolean enabled to remove the use of the schedule). There is then a background job that runs every day and creates do_not_disturb_timings for each user with an enabled notification schedule. The job schedules timings 2 days in advance. The job is designed so that it can be run at any point in time, and it will not create duplicate records.
When a users saves their notification schedule, the schedule processing service will run and schedule do_not_disturb_timings. If the user should be in DND due to their schedule, the user will immediately be put in DND (message bus publishes this state).
The UI for a user's notification schedule is in user -> preferences -> notifications. By default every day is 8am - 5pm when first enabled.
This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
There was an issue that occurred with this order of operations:
* An IMAP topic was created by emailing a group
* A second user was invited to the topic (not the OP and not the group)
* A user with access to the group replies to the topic
* The second user receives a user_private_message notification email because of their involvement in the topic
* The second user replies to the email via email
This new reply would then go and notify the other group PM users, except for those who emailed the group topic directly, which is handled via the group SMTP mailer. However because the new post already has an incoming email because it is parsed via the Email::Receiver via POP3 the group SMTP section of the post alerter is skipped, and the group's email address is not ignored for the user_private_message notification.
This PR fixes it so the group is not ever sent an email via the PM notification. This is important because any new emails in the group's IMAP inbox will be picked up by the Imap::Sync code and created as a new topic which is not at all desirable.
Also in this PR I split up the specs a bit more for group SMTP in the post alerter to make them easier to read and they each only test one thing.
As per @davidtaylorhq 's comment at 6e2be3e#r46069906, this fixes an oversight where if login_required is enabled and an anon user follows a confirm new email link they are forced to login, which is not what the intent of #10830 was.
* FEATURE: Give user menu icons alt attributes
This commit gives user menu icons + notifications alt attributes
* UI: Use Translations
This commit refactors the code injecting alt tags to the icons to use translations instead of hard-coded text.
Moves the topic timer jobs from being scheduled ahead of time with enqueue_at to a 5 minute scheduled run like bookmark reminders, in a new job called Jobs::EnqueueTopicTimers. Backwards compatibility is maintained by checking if an existing topic timer job is enqueued in sidekiq for the timer, and if it is not running it inside the new job.
The functionality to close/open a topic if it is in the opposite state still remains in the after_save block of TopicTimer, with further commentary, which is used for Open/Close Temporarily.
This also removes the ensure_consistency! functionality of topic timers as it is no longer needed; the new job will always pick up the timers because they are not stored in a fragile state of sidekiq.
This adds a safe default to not process pop3 emails when the pop3 polling option is set up that are > 1 week old. This is to avoid the situation where an older mailbox is used, which causes us to go and process all emails in that mailbox, sending out error emails to the senders of emails which cannot be parsed successfully.
Admins can now edit translations in different languages without having to change their locale. We display a warning when there's a fallback language set.
When selecting the "date in post" option from the bookmark reminder modal, it was not converting the date from the post, which may be in a completely different timezone, to the current user's timezone.
This PR fixes it so the timezone from the post is used to parse the date then converted to the user's timezone.
Going from /latest?f=tracked to /latest will result in three
different topic list requests because the query params are not
considered when determining if the route is staying the same.
Fixes bug introduced by bd25627198
What happens is we send notifications to everyone involved in the group inbox topic about new posts, however we pass the param `skip_send_email_to: email_addresses`. In the above commit I removed the group email address from this `email_addresses` array. This breaks the IMAP inbox because we email the group with the reply, and the IMAP sync tool finds this email and opens a new unrelated topic with it.
This results in some fun disasters if allowed to happen. For now, just issue an oblique error message; a localized message will be added on the client.
This PR fixes a race condition with the IMAP notification code. In the `Email::Receiver` we call the `NewPostManager` to create the post and enqueue jobs and sends alerts via `PostAlerter`. However, if the post alerter reaches the `notify_pm_users` and the `group_notifying_via_smtp` method _before_ the incoming email is updated with the post and topic, we unnecessarily send a notification to the person who just posted. The result of this is that the IMAP syncer re-imports the email sent to the user about their own post, which looks like this in the group inbox:
To fix this, we skip the jobs enqueued by `NewPostManager` and only enqueue them with `PostJobsEnqueuer` manually _after_ the incoming email record has been updated with the post and topic.
Other improvements:
* Moved code to calculate email addresses from `IncomingEmail` records into the topic, with a group passed in, for easier testing and debugging. It is not the responsibility of the post alerter to figure this stuff out.
* Add shortcut methods on `IncomingEmail` to split or provide an empty array for to and cc addresses to avoid repetition.
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
It used to change the category of the topic, instead of the destination
category (topic.category_id instead of topic.shared_draft.category_id).
The shared drafts controls were displayed only if the current category
matched the 'shared drafts category', which was not true for shared
drafts that had their categories changed (affected by the previous bug).
Before this change we were setting the input after the query has been done, resulting in us overwriting the input if the user types during the query.
We don't need to update it after the query, we just need to ensure it's set when we load the page and then it should stay in sync.
If a group you're a member of is invited to a PM, you can no longer remove yourself from it. This means you won't be able to remove the message from your inbox, and even if you archive it, it'll come back once someone replies.
Splits the `ToggleTopicClosed` job into two distinct `OpenTopic` and `CloseTopic` jobs to make the code clearer. The old job cannot be deleted yet because of outstanding sidekiq schedules, so a todo has been added to do so later this year.
Also replaced mentions of `topic_status_update` with `topic_timer` in some files, because the `topic_status_update` model is obsolete and replaced by topic timer.
Added some shortcut methods for checking if a topic is open/whether a user can change an open topic.
* DEV: TopicTrackingState calls should happen in the background
It was observed that calling TopicTrackingState on popular topics could result in a large number of calls to redis, resulting in slow response times when posting replies.
These calls should be moved to a background job.
* DEV: PostUpdateTopicTrackingState should execute on default queue
A while ago we made a change to display a warning after installing a theme component when the admin tries to leave the page without adding the new installed component to any themes (see 5e29ae3ef5).
However there is an edge case that we forgot to address, and that's when an admin installs a component and then immediately opens the install modal again to install another one which can result in the warning being shown twice at the same time.
This PR prevents that by showing the warning when opening the install modal if the conditions are met (new component and not added to any themes) instead of showing it after installing the second component.
Installing multiple copies of the same theme/component is possible, but you rarely need to actually have multiple copies installed. We've seen many times new admins installing duplicates of components because they were unaware it was already installed. This PR makes the theme installer modal loop through the existing themes when you click on 'install', and if there is a theme with a URL that matches the URL you entered, a warning will show up and you will need to click 'install' again to proceed.
When you type # or @ in the search box, a popup appears with
autocomplete suggestions. Currently, when the popup is rendered it has
the first item selected and upon pressing Enter, the first item is
inserted into the search box. The problem with this behavior is that the
first suggestion may not be what you want, and if you are typing quickly
and hit enter, the first suggestion (which is not what you want) is
inserted in the search box.
This PR amends the popup so that it has no suggestions selected by
default which means the enter key will not insert anything unless you
select a suggestion via the up or down arrow keys.
Fixes a rare race condition causing the `Imap::Sync` class to create an incoming email and associated post/topic, which then kicks off the PostAlerter to notify others in the PM about a reply in the topic, but for the OP which is not necessary (because the person emailing the IMAP inbox already knows about the OP). Basically, we should never be sending the group SMTP email for the first post in a topic.
Also in this PR:
* Custom attribute accessors for the to/from/cc addresses on `IncomingEmail`, to parse them from an array to a joined string so the logic for this is only in one place.
* Store extra detail against the `IncomingEmail` created in `GroupSmtpMailer`
* regex test Mail header Reply-To as string instead of Field, which fixes `warning: deprecated Object#=~ is called on Mail::Field; it always returns nil`
* Add DEBUG_IMAP to log all IMAP logs as warnings for easier debugging
* Changed the Rails logging to `ImapSyncLog` in the `GroupSmtpMailer`
- Only initialize the S3Helper when needed
- Skip initializing the S3Helper for S3Store#cdn_url
- Allow cook_url to be passed a `local` hint to skip unnecessary checks
These 2 indexes optimise performance on profile pages.
The summary page displays:
1. A list of "Top Link" - links sorted by number of clicks posted by user
2. A list of "Top Replies" - replies made by a user that go the most hearts
These two areas could devolve into full index or table scans, new indexes are there to avoid this cost on large dbs
One minor downside is that storage requirements go a tiny bit up to maintain the new indexes
osts from topics with 'auto delete replies timer' with more than
skip_auto_delete_reply_likes likes will no longer be deleted. If 0,
all posts will be deleted.
Googlebot handles no-index headers very elegantly. It advises to leave as many routes as possible open and uses headers for high fidelity rules regarding indexes.
Discourse adds special `x-robot-tags` noindex headers to users, badges, groups, search and tag routes.
Following up on b52143feff we now have it so Googlebot gets special handling.
Rest of the crawlers get a far more aggressive disallow list to protect against excessive crawling.
My initial implementation didn't consider this case. We should skip imported users if the "imported_id" field is present, even if there're other custom fields.
* DEV: Remove with_deleted workarounds for old Rails version
These workarounds using private APIs are no longer required in the latest version of Rails. The referenced issue (https://github.com/rails/rails/issues/4306) was closed in 2013. The acts_as_paranoid workaround which this was based on was removed for rails > 5.
Switching to using a scope also allows us to use it within a `belongs_to` relation (e.g. in the Poll model). This avoids issues which can be caused by unscoping all `where` clauses.
Predicates are not necessarily strings, so calling `.join(" AND ")` can sometimes cause weird errors. If we use `WhereClause#ast`, and then `.to_sql` we achieve the same thing with fully public APIs, and it will work successfully for all predicates.
The notification panel gets resized and the JS uses maxWidth of 320.
This tends to fight with the CSS causing notifications to "jump" a bit when a new one lands.
If we clear the in-process cache first, it might get re-filled from the
DB before we clear the DB cache. This would be more likely on high-traffic
sites.
Scrolling was not working as expected after clicking the browser back button and navigating back to the tag topic list. We need to wrap the scroll inside a debounce function to ensure that the "window.pageYOffset" property is populated before our function runs.
Include the enable_filtered_replies_view site setting in the admin UI
Adds title label to in-reply-to widget
Invokes the filtered UI when using replies_to_post_number as a query
parameter
Replaces the "Show All" button icon
Fixes grammar for "Viewing 1 reply to..." label
This is an edge-case of 9fb3629. An admin could set the shared draft category to one where both TL2 and TL3 users have access but only give shared draft access to TL3 users. If something like this happens, we need to make sure that TL2 users won't be able to see them, and they won't be listed on latest.
Before this change, `SharedDrafts` were lazily created when a destination category was selected. We now create it alongside the topic and set the destination to the same shared draft category.
* FEATURE: Allow categroy group moderators to list/unlist topics
If enabled via SiteSettings, a user belonging to a group which has been granted category group moderator privileges should be able to list/unlist topics belonging to the appropraite category.
chromium may report float device pixel ratio below 1.5 that is still clearly retina:
```
window.devicePixelRatio
1.4999998807907104
```
We used to round this down to 1 and not provide these browsers with retina avatars.
New algorithm is much more forgiving, anything over 1.1 gets 2x images, anything over 2.1 gets 3x images.
* FIX: 'false' value was treated as a truthy value
For example, latest.json?no_subcategories=false used to have set
no_subcategories to the string value of 'false', which is not false.
* DEV: Remove dead code
* FIX: Redirect to /none under the right conditions
These conditions are:
- neither /all or /none present
- only for default filter
* FIX: Build correct topic list filter
/none was never added to the topic list filter
* FIX: Do not show count for subcategories if 'none' category
* FIX: preload_key must contain /none if no_subcategories
25563357 moved the logout redirect logic from the client-side to the server-side. Unfortunately the login_required check was lost during the refactoring which meant that non-login-required sites would redirect to `/login` after redirect, and immediately restart the login process. Depending on the SSO implementation, that can make it impossible for users to log out cleanly.
This commit restores the login_required check, and prevents the potential redirect loop.
Passes by_user to :user_unsilenced so plugins can detect whether or not
a silence was done automatically (by system user) or manually (by non-system)
Adds the ability to pass details in the action logger params so custom loggers
can pass their own details eg, in custom silence logs
We want to wrap the `Ember.run.debounce` function and internally call `Ember.run` instead when running tests.
This commit changes discourseDebounce to work the same way as `Ember.run.debounce`.
Now that `discourseDebounce` works exactly like `Ember.run.debounce`, let's replace it and only use `DiscourseDebounce` from now on.
Move debounce to discourse-common to be able to reuse it in different bundles
Keep old debounce file for backwards-compatibility
Safari overlays its own nav at the bottom 10% or so of the screen. This
makes buttons in that area virtually unclickable, so to ensure buttons
there are reachable, we need to add enough bottom padding to menu panels.
This is a tiny change that will allow users to hover the date element of a full page search result to see the raw date. It's not always easy to know what the exact date was "20d" ago, so hopefully this helps when it's relevant.
This commit is dedicated to https://twitter.com/FiloSottile/status/1335666583126073354 for reminding me that like timestamps are valuable data.
Likes additionally include the topic_id and post_number of the acted post, to aid in analysis. Flag export does not include the disposition by staff.
Osama Sayegh
Kris
Penar Musaraj
David Taylor
Ahmed Gagan
Vinoth Kannan
Martin Brennan
Joe
Arpit Jalan
Rafael dos Santos Silva
Krzysztof Kotlarek
Robin Ward
Jarek Radosz
Bianca Nenciu
Alan Guo Xiang Tan
Joffrey JAFFEUX
Gerhard Schlager
Roman Rizzi
Dan Ungureanu
Mark VanLandingham
tshenry
Andrew Prigorshnev
Régis Hanol
Jordan Vidrine
Neil Lalonde
Kane York
jbrw
Sam
Guo Xiang Tan
Bmorrical
Jeff Wong