This pull request introduces the endpoints required, and the JavaScript functionality in the `ComposerUppyUpload` mixin, for direct S3 multipart uploads. There are four new endpoints in the uploads controller:
* `create-multipart.json` - Creates the multipart upload in S3 along with an `ExternalUploadStub` record, storing information about the file in the same way as `generate-presigned-put.json` does for regular direct S3 uploads
* `batch-presign-multipart-parts.json` - Takes a list of part numbers and the unique identifier for an `ExternalUploadStub` record, and generates the presigned URLs for those parts if the multipart upload still exists and if the user has permission to access that upload
* `complete-multipart.json` - Completes the multipart upload in S3. Needs the full list of part numbers and their associated ETags which are returned when the part is uploaded to the presigned URL above. Only works if the user has permission to access the associated `ExternalUploadStub` record and the multipart upload still exists.
After we confirm the upload is complete in S3, we go through the regular `UploadCreator` flow, the same as `complete-external-upload.json`, and promote the temporary upload S3 into a full `Upload` record, moving it to its final destination.
* `abort-multipart.json` - Aborts the multipart upload on S3 and destroys the `ExternalUploadStub` record if the user has permission to access that upload.
Also added are a few new columns to `ExternalUploadStub`:
* multipart - Whether or not this is a multipart upload
* external_upload_identifier - The "upload ID" for an S3 multipart upload
* filesize - The size of the file when the `create-multipart.json` or `generate-presigned-put.json` is called. This is used for validation.
When the user completes a direct S3 upload, either regular or multipart, we take the `filesize` that was captured when the `ExternalUploadStub` was first created and compare it with the final `Content-Length` size of the file where it is stored in S3. Then, if the two do not match, we throw an error, delete the file on S3, and ban the user from uploading files for N (default 5) minutes. This would only happen if the user uploads a different file than what they first specified, or in the case of multipart uploads uploaded larger chunks than needed. This is done to prevent abuse of S3 storage by bad actors.
Also included in this PR is an update to vendor/uppy.js. This has been built locally from the latest uppy source at d613b849a6. This must be done so that I can get my multipart upload changes into Discourse. When the Uppy team cuts a proper release, we can bump the package.json versions instead.
This disallows putting URLs in topic titles for TL0 users, which means that:
If a TL-0 user puts a link into the title, a topic featured link won't be generated (as if it was disabled in the site settings)
Server methods for creating and updating topics will be refusing featured links when they are called by TL-0 users
TL-0 users won't be able to put any link into the topic title. For example, the title "Hey, take a look at https://my-site.com" will be rejected.
Also, it improves a bit server behavior when creating or updating feature links on topics in the categories with disabled featured links. Before the server just silently ignored a featured link field that was passed to him, now it will be returning 422 response.
This adds a few different things to allow for direct S3 uploads using uppy. **These changes are still not the default.** There are hidden `enable_experimental_image_uploader` and `enable_direct_s3_uploads` settings that must be turned on for any of this code to be used, and even if they are turned on only the User Card Background for the user profile actually uses uppy-image-uploader.
A new `ExternalUploadStub` model and database table is introduced in this pull request. This is used to keep track of uploads that are uploaded to a temporary location in S3 with the direct to S3 code, and they are eventually deleted a) when the direct upload is completed and b) after a certain time period of not being used.
### Starting a direct S3 upload
When an S3 direct upload is initiated with uppy, we first request a presigned PUT URL from the new `generate-presigned-put` endpoint in `UploadsController`. This generates an S3 key in the `temp` folder inside the correct bucket path, along with any metadata from the clientside (e.g. the SHA1 checksum described below). This will also create an `ExternalUploadStub` and store the details of the temp object key and the file being uploaded.
Once the clientside has this URL, uppy will upload the file direct to S3 using the presigned URL. Once the upload is complete we go to the next stage.
### Completing a direct S3 upload
Once the upload to S3 is done we call the new `complete-external-upload` route with the unique identifier of the `ExternalUploadStub` created earlier. Only the user who made the stub can complete the external upload. One of two paths is followed via the `ExternalUploadManager`.
1. If the object in S3 is too large (currently 100mb defined by `ExternalUploadManager::DOWNLOAD_LIMIT`) we do not download and generate the SHA1 for that file. Instead we create the `Upload` record via `UploadCreator` and simply copy it to its final destination on S3 then delete the initial temp file. Several modifications to `UploadCreator` have been made to accommodate this.
2. If the object in S3 is small enough, we download it. When the temporary S3 file is downloaded, we compare the SHA1 checksum generated by the browser with the actual SHA1 checksum of the file generated by ruby. The browser SHA1 checksum is stored on the object in S3 with metadata, and is generated via the `UppyChecksum` plugin. Keep in mind that some browsers will not generate this due to compatibility or other issues.
We then follow the normal `UploadCreator` path with one exception. To cut down on having to re-upload the file again, if there are no changes (such as resizing etc) to the file in `UploadCreator` we follow the same copy + delete temp path that we do for files that are too large.
3. Finally we return the serialized upload record back to the client
There are several errors that could happen that are handled by `UploadsController` as well.
Also in this PR is some refactoring of `displayErrorForUpload` to handle both uppy and jquery file uploader errors.
Adds a new `smtp_group_id` column to `EmailLog` which is filled in if the mail `from_address` matches a group's `email_username`. This is for easier debugging, so we know which emails have been sent via group SMTP.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
Discourse shouldn't dynamically calculate the path of uploads and optimized images after a file has been stored on disk or S3. Otherwise it might calculate the wrong path if the SHA1 or extension stored in the database doesn't match the actual file path.
* FEATURE: add support for like webhooks
Add support for like webhooks. Webhook events only send on user membership
in the defined webhook group filters.
This also fixes group webhook events, as before this was never used, and
the logic was not correct.
This is a try to simplify logic around dismiss new topics to have one solution to work in all places - dismiss all-new, dismiss new in a specific category or even in a specific tag.
- IgnoredUser records should all now have an expiring_at value. This commit enforces that in the DB, and fixes any corrupt rows
- Changes to the ignored user list are now handled by the `/u/{username}/notification_level` endpoint. This allows setting expiration dates on the ignore. This commit removes the old logic for saving a list of usernames in the user preferences.
- Many specs were calling `IgnoredUser.create`. This commit changes them to use `Fabricate(:ignored_user)` for consistency
Our Email::Sender class accepts an optional user argument, which is used to create a PostReplyKey record when present. This record is used to sub out the %{reply_key} placeholder in the Reply-To mail header, so if we do not pass in the user we get a broken Reply-To header.
This is especially problematic in the IMAP group SMTP situation, because these emails go to customers that we are replying to, and when they reply to us the email bounces! This fixes the issue by passing user to the Email::Sender when sending a group_smtp email but there is still more to do in another PR.
This Email::Sender optional user is a bit of a footgun IMO, especially because most of the time we use it there is a user we can source. I would like to do another PR for this after this one to make the parameter not optional, so we don't end up with these reply issues down the line again.
This is intended for use by plugins which are building their own topic lists, and want to include PMs alongside regular topics (e.g. discourse-assign). It does not get used directly in core.
It's possible that the original topic image is broken in some form, so
we shouldn't try and generate a topic thumbnail for it. The fix will
prevent the generate_topic_thumbnails job being enqueued every time the
topic is viewed.
Adds functionality to reflect topic delete in Discourse to IMAP inbox (Gmail only for now) and reflecting Gmail deletes in Discourse.
Adding lots of tests, various refactors and code improvements.
When Discourse topic is destroyed in PostDestroyer mark the topic incoming email as imap_sync: true, and do the opposite when post is recovered.
* FEATURE: Allow List for PMs
This feature adds a new user setting that is disabled by default that
allows them to specify a list of users that are allowed to send them
private messages. This way they don't have to maintain a large list of
users they don't want to here from and instead just list the people they
know they do want. Staff will still always be able to send messages to
the user.
* Update PR based on feedback
Fixed bugs, added specs, extracted the upload downsizing code to a class, added support for non-S3 setups, changed it so that images aren't downloaded twice.
This code has been tested on production and successfully resized ~180k uploads.
Includes:
* DEV: Extract upload downsizing logic
* DEV: Add support for non-S3 uploads
* DEV: Process only images uploaded by users
* FIX: Incorrect usage of `count` and `exist?` typo
* DEV: Spec S3 image downsizing
* DEV: Avoid downloading images twice
* DEV: Update filesizes earlier in the process
* DEV: Return false on invalid upload
* FIX: Download images that currently above the limit (If the image size limit is decreased, then there was no way to resize those images that now fall outside the allowed size range)
* Update script/downsize_uploads.rb (Co-authored-by: Régis Hanol <regis@hanol.fr>)
This reverts commit 20780a1eee.
* SECURITY: re-adds accidentally reverted commit:
03d26cd6: ensure embed_url contains valid http(s) uri
* when the merge commit e62a85cf was reverted, git chose the 2660c2e2 parent to land on
instead of the 03d26cd6 parent (which contains security fixes)
Adds a new topic_excerpt_maxlength site setting.
* When topic excerpt is requested for a post, use the new topic_excerpt_maxlength site setting to limit the size of the excerpt
* Remove code for getting/setting Post.excerpt_size as it is not used anywhere
* FIX: Emit web hooks for flags
* FEATURE: Remove 'flag' web hook in favor of 'reviewable' web hook
* FEATURE: Remove 'queued post' web hook in favor of 'reviewable' web hook
* FIX: Do not set a default value for web hooks with no events
This introduces new APIs for obtaining optimized thumbnails for topics. There are a few building blocks required for this:
- Introduces new `image_upload_id` columns on the `posts` and `topics` table. This replaces the old `image_url` column, which means that thumbnails are now restricted to uploads. Hotlinked thumbnails are no longer possible. In normal use (with pull_hotlinked_images enabled), this has no noticeable impact
- A migration attempts to match existing urls to upload records. If a match cannot be found then the posts will be queued for rebake
- Optimized thumbnails are generated during post_process_cooked. If thumbnails are missing when serializing a topic list, then a sidekiq job is queued
- Topic lists and topics now include a `thumbnails` key, which includes all the available images:
```
"thumbnails": [
{
"max_width": null,
"max_height": null,
"url": "//example.com/original-image.png",
"width": 1380,
"height": 1840
},
{
"max_width": 1024,
"max_height": 1024,
"url": "//example.com/optimized-image.png",
"width": 768,
"height": 1024
}
]
```
- Themes can request additional thumbnail sizes by using a modifier in their `about.json` file:
```
"modifiers": {
"topic_thumbnail_sizes": [
[200, 200],
[800, 800]
],
...
```
Remember that these are generated asynchronously, so your theme should include logic to fallback to other available thumbnails if your requested size has not yet been generated
- Two new raw plugin outlets are introduced, to improve the customisability of the topic list. `topic-list-before-columns` and `topic-list-before-link`
If the feature is enabled, staff members can construct a URL and publish a
topic for others to browse without the regular Discourse chrome.
This is useful if you want to use Discourse like a CMS and publish
topics as articles, which can then be embedded into other systems.
Introduce the concept of "high priority notifications" which include PM and bookmark reminder notifications. Now bookmark reminder notifications act in the same way as PM notifications (float to top of recent list, show in the green bubble) and most instances of unread_private_messages in the UI have been replaced with unread_high_priority_notifications.
The user email digest is changed to just have a section about unread high priority notifications, the unread PM section has been removed.
A high_priority boolean column has been added to the Notification table and relevant indices added to account for it.
unread_private_messages has been kept on the User model purely for backwards compat, but now just returns unread_high_priority_notifications count so this may cause some inconsistencies in the UI.
* FIX: Perform crop using user-specified image sizes
It used to resize the images to max width and height first and then
perform the crop operation. This is wrong because it ignored the user
specified image sizes from the Markdown.
* DEV: Use real images in test
* This PR implements the scheduling and notification system for bookmark reminders. Every 5 minutes a schedule runs to check any reminders that need to be sent before now, limited to **300** reminders at a time. Any leftover reminders will be sent in the next run. This is to avoid having to deal with fickle sidekiq and reminders in the far-flung future, which would necessitate having a background job anyway to clean up any missing `enqueue_at` reminders.
* If a reminder is sent its `reminder_at` time is cleared and the `reminder_last_sent_at` time is filled in. Notifications are only user-level notifications for now.
* All JavaScript and frontend code related to displaying the bookmark reminder notification is contained here. The reminder functionality is now re-enabled in the bookmark modal as well.
* This PR also implements the "Remind me next time I am at my desktop" bookmark reminder functionality. When the user is on a mobile device they are able to select this option. When they choose this option we set a key in Redis saying they have a pending at desktop reminder. The next time they change devices we check if the new device is desktop, and if it is we send reminders using a DistributedMutex. There is also a job to ensure consistency of these reminders in Redis (in case Redis drops the ball) and the at desktop reminders expire after 20 days.
* Also in this PR is a fix to delete all Bookmarks for a user via `UserDestroyer`
### UI Changes
If `SiteSetting.enable_bookmarks_with_reminders` is enabled:
* Clicking "Bookmark" on a topic will create a new Bookmark record instead of a post + user action
* Clicking "Clear Bookmarks" on a topic will delete all the new Bookmark records on a topic
* The topic bookmark buttons control the post bookmark flags correctly and vice-versa
Disabled selecting the "reminder type" for bookmarks in the UI because the backend functionality is not done yet (of sending users notifications etc.)
### Other Changes
* Added delete bookmark route (but no UI yet)
* Added a rake task to sync the old PostAction bookmarks to the new Bookmark table, which can be run as many times as we want for a site (it will not create duplicates).
Basically, say you had already downloaded a certain image from a certain URL
using pull_hotlinked_images and the onebox. The upload would be stored
by its sha as an upload record. Whenever you linked to the same URL again
in a post (e.g. in our case an og:image on review.discourse) we would
would reuse the original upload record because of the sha1.
However when you turned on secure media this could cause problems as
the first post that uses that upload after secure media is enabled
will set the access control post for the upload to the new post.
Then if the post is deleted every single onebox/link to that same image
URL will fail forever with 403 as the secure-media-uploads URL fails
if the access control post has been deleted.
To fix this when cooking posts and pulling hotlinked images, we only
allow using an original upload by URL if its access control post
matches the current post, and if the original_sha1 is filled in,
meaning it was uploaded AFTER secure media was enabled. otherwise
we just redownload the media again to be safe, as the URL will always
be new then.
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
A small fix for Basic User Serializers where some downstream serializers do not correctly set user objects. This caused some issues in certain plugins that depend on the user method to return a user.
API keys are now only visible when first created. After that, only the first four characters are stored in the database for identification, along with an sha256 hash of the full key. This makes key usage easier to audit, and ensures attackers would not have access to the live site in the event of a database leak.
This makes the merge lower risk, because we have some time to revert if needed. Once the change is confirmed to be working, we will add a second commit to drop the `key` column.
Note: All of this functionality is hidden behind a hidden, default false, site setting called `enable_bookmarks_with_reminders`. Also, any feedback on Ember code would be greatly appreciated!
This is part 1 of the bookmark improvements. The next PR will address the backend logic to send reminder notifications for bookmarked posts to users. This PR adds the following functionality:
* We are adding a new `bookmarks` table and `Bookmark` model to make the bookmarks a first-class citizen and to allow attaching reminders to them.
* Posts now have a new button in their actions menu that has the icon of an actual book
* Clicking the button opens the new bookmark modal.
* Both name and the reminder type are optional.
* If you close the modal without doing anything, the bookmark is saved with no reminder.
* If you click the Cancel button, no bookmark is saved at all.
* All of the reminder type tiles are dynamic and the times they show will be based on your user timezone set in your profile (this should already be set for you).
* If for some reason a user does not have their timezone set they will not be able to set a reminder, but they will still be able to create a bookmark.
* A bookmark can be deleted by clicking on the book icon again which will be red if the post is bookmarked.
This PR does NOT do anything to migrate or change existing bookmarks in the form of `PostActions`, the two features live side-by-side here. Also this does nothing to the topic bookmarking.
Adds 2 factor authentication method via second factor security keys over [web authn](https://developer.mozilla.org/en-US/docs/Web/API/Web_Authentication_API).
Allows a user to authenticate a second factor on login, login-via-email, admin-login, and change password routes. Adds registration area within existing user second factor preferences to register multiple security keys. Supports both external (yubikey) and built-in (macOS/android fingerprint readers).
If enabled, this will fire a webhook whenever a user's notification has
been created. This could potentially be a lot of data depending on your
forum, and should be used carefully since it includes everything all users
will see in their feeds.
* FEATURE: Add search operator to see all direct messages from a user
* Only show message if related messages >= 5
* Make "all messages" the hyperlink
* Review
DEV: deprecate `invite.via_email` in favor of `invite.emailed_status`
This commit adds a new column `emailed_status` in `invites` table for
tracking email sending status.
0 - not required
1 - pending
2 - bulk pending
3 - sending
4 - sent
For normal email invites, invite record is created with emailed_status
set to 'pending'.
When bulk invites are sent invite record is created with emailed_status
set to 'bulk pending'.
For invites that generates link, invite record is created with
emailed_status set to 'not required'.
When invite email is in queue emailed_status is updated to 'sending'
Once the email is sent via `InviteEmail` job the invite emailed_status
is updated to 'sent'.
Previously we used custom fields to denote a user was anonymous, this was
risky in that custom fields are prone to race conditions and are not
properly dedicated, missing constraints and so on.
The new table `anonymous_users` is properly protected. There is only one
possible shadow account per user, which is enforced using a constraint.
Every anonymous user will have a unique row in the new table.
This is a feature that used to be present in discourse-assign but is
much easier to implement in core. It also allows a topic to be assigned
without it claiming for review and vice versa and allows it to work with
category group reviewers.
This change both speeds up specs (less strings to allocate) and helps catch
cases where methods in Discourse are mutating inputs.
Overall we will be migrating everything to use #frozen_string_literal: true
it will take a while, but this is the first and safest move in this direction
Includes support for flags, reviewable users and queued posts, with REST API
backwards compatibility.
Co-Authored-By: romanrizzi <romanalejandro@gmail.com>
Co-Authored-By: jjaffeux <j.jaffeux@gmail.com>
* FEATURE: Add `IgnoredUsersSummary` daily job
## Why?
This is part of the [Ability to ignore a user feature](https://meta.discourse.org/t/ability-to-ignore-a-user/110254/8).
We want to:
1. Send an automatic group PM that goes out to moderators
2. When {x} users have Ignored the same user, threshold defined by a site setting, default of 5
3. Only send this message every X days which is defined by another site setting
Some URLs in browsers are non compliant and contain twos `#` this commit adds
special handling for this edge case by auto encoding any fragments containing `#`
Do not send an activation email to users invited via email. They
already confirmed their email address by clicking the invite link.
Users invited via link will need to confirm their email address before
they can login.
This updates tests to use latest rails 5 practice
and updates ALL dependencies that could be updated
Performance testing shows that performance has not regressed
if anything it is marginally faster now.
This feature can be enabled by choosing a destination for the
`shared drafts category` site setting.
* Staff members can create shared drafts, choosing a destination
category for the topic when it is published.
* Shared Drafts can be viewed in their category, or above the
topic list for the destination category where it will end up.
* When the shared draft is ready, it can be published to the
appropriate category by clicking a button on the topic view.
* When published, Drafts change their timestamps to the current
time, and any edits to the original post are removed.
For pending new topics: the body of the post, title, categories
and the tags are editable.
For pending new replies: only the body is applicable and thus
editable
DISCUSSION: https://meta.discourse.org/t/66754
This feature introduces the concept of themes. Themes are an evolution
of site customizations.
Themes introduce two very big conceptual changes:
- A theme may include other "child themes", children can include grand
children and so on.
- A theme may specify a color scheme
The change does away with the idea of "enabled" color schemes.
It also adds a bunch of big niceties like
- You can source a theme from a git repo
- History for themes is much improved
- You can only have a single enabled theme. Themes can be selected by
users, if you opt for it.
On a technical level this change comes with a whole bunch of goodies
- All CSS is now compiled using a custom pipeline that uses libsass
see /lib/stylesheet
- There is a single pipeline for css compilation (in the past we used
one for customizations and another one for the rest of the app
- The stylesheet pipeline is now divorced of sprockets, there is no
reliance on sprockets for CSS bundling
- CSS is generated with source maps everywhere (including themes) this
makes debugging much easier
- Our "live reloader" is smarter and avoid a flash of unstyled content
we run a file watcher in "puma" in dev so you no longer need to run
rake autospec to watch for CSS changes
This allows users who entered a typo or invalid email address when
signing up an opportunity to fix it and resending the confirmation
email to that address.
- Regular users are not notified of whispers
- Regular users no longer have "stuck" topics in unread
- Additional tracking for staff highest post number
- Remove a bunch of unused columns in topics table
previously we supported blanket read and write for user API, this
change amends it so we can define more limited scopes. A scope only
covers a few routes. You can not grant access to part of the site and
leave a large amount of the information hidden to API consumer.
This reduces the number of scans that the db has to do in the query
to fetch orphan uploads. Futheremore, we were not batching our
records which bloats memory.
Vinoth Kannan
Martin Brennan
Andrei Prigorshnev
Jean
Gerhard Schlager
Jeff Wong
Krzysztof Kotlarek
Mark VanLandingham
David Taylor
Blake Erickson
Jarek Radosz
Joffrey JAFFEUX
Arpit Jalan
Gerhard Schlager
Guo Xiang Tan
Michael Brown
Jeff Atwood
Bianca Nenciu
Dan Ungureanu
Kane York
Robin Ward
Roman Rizzi
Martin Brennan
Daniel Waterworth
Osama Sayegh
Vinoth Kannan
Guo Xiang Tan
Sam Saffron
Tarek Khalil
Paul Trippett
Régis Hanol
Leo McArdle
Maja Komel
Neil Lalonde
Vinoth Kannan
Kyle Zhao
Jakub Macina
Erick Guan
Rafael dos Santos Silva