After editing a post, it is refreshed by two ways. One of them is
triggered by the client side which will route the client to the edited
post and force a reload this way. The other way is via Message Bus.
This commit ignores both of the ways and tries to update the post
immediately and then refresh the post stream.
It used to require SiteSetting.min_trust_level_to_allow_invite to
invite a user to a group, even if the user existed and the inviter was
a group owner.
Users who use encoded slugs on their sites sometimes run into 500 error when pasting a link to another topic in a post. The problem happens when generating a backward "reflection" link that would appear in a linked topic. Link URL restricted on the database level to 500 chars in length. At first glance, it should work since we have a restriction on topic title length.
But it doesn't work when a site uses encoded slugs, like here (take a look at the URL). The link to a topic, in this case, can be much longer than 500 characters.
By the way, an error happens only when generating a "reflection" link and doesn't happen with a direct link, we truncate that link. It works because, in this case, the original long link is still present in the post body and can be used for navigation. But we can't do the same for backward "reflection" links (without rewriting their implementation), the whole link must be saved to the database.
The simplest and cleanest solution will be just to remove the restriction on the database level. Abuse is impossible here since we are already protected by the restriction on topic title length. There aren’t performance benefits in using length-constrained columns in Postgres, in fact, length-constrained columns need a few extra CPU cycles to check the length when storing data.
When a topic is fully merged into another topic we close it and schedule its deleting. But, because of a bug, if the merged topic contains some moderator actions or small actions it won't be merged. This change fixes this problem.
An important note: in general, we don't want to close a topic after moving posts if it still contains some regular posts or whispers. But when we are moving posts to a private message we don't want the notice about it to be publicly visible. So we use whispers with action_code == 'split_topic' instead of small_actions in such cases and we should ignore this specific kind of whispers when decide if we should close the merged topic.
It was not clear that replace watched words can be used to replace text
with URLs. This introduces a new watched word type that makes it easier
to understand.
I merged this PR in yesterday, finally thinking this was done https://github.com/discourse/discourse/pull/12958 but then a wild performance regression occurred. These are the problem methods:
1aa20bd681/app/serializers/topic_tracking_state_serializer.rb (L13-L21)
Turns out date comparison is super expensive on the backend _as well as_ the frontend.
The fix was to just move the `treat_as_new_topic_start_date` into the SQL query rather than using the slower `UserOption#treat_as_new_topic_start_date` method in ruby. After this change, 1% of the total time is spent with the `created_in_new_period` comparison instead of ~20%.
----
History:
Original PR which had to be reverted **https://github.com/discourse/discourse/pull/12555**. See the description there for what this PR is achieving, plus below.
The issue with the original PR is addressed in 92ef54f402
If you went to the `x unread` link for a tag Chrome would freeze up and possibly crash, or eventually unfreeze after nearly 10 mins. Other routes for unread/new were similarly slow. From profiling the issue was the `sync` function of `topic-tracking-state.js`, which calls down to `isNew` which in turn calls `moment`, a change I had made in the PR above. The time it takes locally with ~1400 topics in the tracking state is 2.3 seconds.
To solve this issue, I have moved these calculations for "created in new period" and "unread not too old" into the tracking state serializer.
When I was looking at the profiler I also noticed this issue which was just compounding the problem. Every time we modify topic tracking state we recalculate the sidebar tracking/everything/tag counts. However this calls `forEachTracked` and `countTags` which can be quite expensive as they go through the whole tracking state (and were also calling the removed moment functions).
I added some logs and this was being called 30 times when navigating to a new /unread route because `sync` is being called from `build-topic-route` (one for each topic loaded due to pagination). So I just added a debounce here and it makes things even faster.
Finally, I changed topic tracking state to use a Map so our counts of the state keys is faster (Maps have .size whereas objects you have to do Object.keys(obj) which is O(n).)
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
Refactors `TrustLevel` and moves translations from server to client
Additional changes:
* "staff" and "admin" wasn't translatable in site settings
* it replaces a concatenated string with a translation
* uses translation for trust levels in users_by_trust_level report
* adds a DB migration to rename keys of translation overrides affected by this commit
In Ember CLI, the vendor bundler includes Ember/jQuery, so this brings
our app closer to that configuration.
We have a couple pages (Reset Password / Confirm New Email) where we need
`ember_jquery` without vendor so the file still exists for those cases.
Previous to this change we would switch off MessageBus updating after 20
minutes.
This ensures that when the user becomes present again we turn on long polling.
Without long polling updates can be delayed for minutes.
The widget should accept the disabled option.
In that case, CSS class "disabled".
In addition, after click dropdown will not be shown.
Also, the option to disable a specific value in a dropdown is included
…and just prioritize the current one, instead of hiding other categories.
Context: when you open the composer by clicking "New Topic" button when in a category, or by clicking "New Topic" in the share-popup, the category selector shows only the current category and its children (and "Uncategorized"). You can still find other categories, but you have to search by name.
This PR changes that, so you now can see all the categories in the dropdown, and those that are relevant (again: current, children and uncategorized) are displayed before all other categories.
tldr: don't make choosing other categories harder - make choosing relevant ones easier.
1. It defaults to `cache: true` already
2. Setting it to `false` for non-GET request doesn't do anything
3. We were correcting `cache: false` GET requests to use `cache: true`
…so setting it to anything at all, for any type of request doesn't make sense (anymore)
When the client received a new notification, it prioritized only PM
notifications instead of maintaining the priority order. Later, the
check for missing notification deleted all notifications that were
in the wrong order because it could not match the IDs.
The correct order puts high_priority AND unread notifications first.
Low priority or read notifications (including high priority, but read
notifications) come after.
Original PR which had to be reverted **https://github.com/discourse/discourse/pull/12555**. See the description there for what this PR is achieving, plus below.
The issue with the original PR is addressed in 92ef54f402
If you went to the `x unread` link for a tag Chrome would freeze up and possibly crash, or eventually unfreeze after nearly 10 mins. Other routes for unread/new were similarly slow. From profiling the issue was the `sync` function of `topic-tracking-state.js`, which calls down to `isNew` which in turn calls `moment`, a change I had made in the PR above. The time it takes locally with ~1400 topics in the tracking state is 2.3 seconds.
To solve this issue, I have moved these calculations for "created in new period" and "unread not too old" into the tracking state serializer.
When I was looking at the profiler I also noticed this issue which was just compounding the problem. Every time we modify topic tracking state we recalculate the sidebar tracking/everything/tag counts. However this calls `forEachTracked` and `countTags` which can be quite expensive as they go through the whole tracking state (and were also calling the removed moment functions).
I added some logs and this was being called 30 times when navigating to a new /unread route because `sync` is being called from `build-topic-route` (one for each topic loaded due to pagination). So I just added a debounce here and it makes things even faster.
Finally, I changed topic tracking state to use a Map so our counts of the state keys is faster (Maps have .size whereas objects you have to do Object.keys(obj) which is O(n).)
A non-staff user cannot post to a closed topic, so we should not
show them the modal asking "Which topic do you want to reply to?"
This also fixes an issue I ran into while testing the above change, in
Ember CLI an error was being raised because related messages were being
set inside a computed property.
When a topic is fully merged into another topic we close it. Now we want also to set a timer for deleting this topic. By default, stub topics will be deleted in 7 days. Users can change this period or disable auto-deleting by setting the period to 0.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
The default `allow_title` column value is "true" for regular and leader badges. After we disable it in admin side the seed method enabling it again while upgrading. So we shouldn't do it for existing badges.
* FIX: Improve GitHub folder regexp in Onebox
It used to match any GitHub URL that was not matched by the other GitHub
Oneboxes and it did not do a good job at handling those. With this
change, the generic Onebox will handle the remaining URLs.
* FEATURE: Add Onebox for GitHub Actions
* FEATURE: Add Onebox for PR check runs
* FIX: Remove image from GitHub folder Oneboxes
It is a generic, auto-generated image which does not provide any value.
* DEV: Add tests
* FIX: Strip HTML comments from PR body
* UX: alert screen readers when there is an issue saving a post
Adds a "alert" role to various popup-input-tips.
This means screen reader users can now tell why a post refuses to save.
Also ensures like icon in the "try the like button" has screen reader support
Previously auto focus would only work on modals that include buttons or
inputs.
To avoid a situation where information modals such as keyboard shortcuts
do not get focus, simply focus on the close button as a fallback.
Previously we would retry push notifications indefinitely for all errors
except for ExpiredSubscription
Under certain conditions other persistent errors may arise such as a persistent
rate limit.
If we track more than 3 errors in a period of time longer than a day we will
delete the subscription
Also performs a bit of internal cleanup to ensure protected methods really
are private.
Admins can visit an approved queued topic from the review queue by clicking their title. We no longer store the created post and topic ids in the reviewable's payload object. Instead, we set the `topic_id` and `target_id` attributes.
There are two methods which the server uses to verify an invite is being redeemed with a matching email:
1) The email token, supplied via a `?t=` parameter
2) The validity of the email, as provided by the auth provider
Only one of these needs to be true for the invite to be redeemed successfully on the server. The frontend logic was previously only checking (2). This commit updates the frontend logic to match the server.
This commit does not affect the invite redemption logic. It only affects the 'show' endpoint, and the UI.
Previously we had no role set for various topic links, nor did we have any
headers.
This teaches screen readers that topic links in topic lists are to be treated
as H2. We opted for this less radical change cause a change of the element
type would probably result in many broken themes.
Confirmed on NVDA you can very quickly breeze through topic lists now. Minor
edge case is pinned topics which can be a bit annoying due to multiple links.
The previous commits removed reviewables leading to a bad user
experience. This commit updates the status, replaces actions with a
message and greys out the reviewable.
We now bundle Javascript for each theme/plugin separately, and only ship bundles for enabled plugins to the client. Therefore, these disabled_plugins checks are now redundant, and can be removed.
This PR improves the UI of bulk select so that its context is applied to the Dismiss Unread and Dismiss New buttons. Regular users (not just staff) are now able to use topic bulk selection on the /new and /unread routes to perform these dismiss actions more selectively.
For Dismiss Unread, there is a new count in the text of the button and in the modal when one or more topic is selected with the bulk select checkboxes.
For Dismiss New, there is a count in the button text, and we have added functionality to the server side to accept an array of topic ids to dismiss new for, instead of always having to dismiss all new, the same as the bulk dismiss unread functionality. To clean things up, the `DismissTopics` service has been rolled into the `TopicsBulkAction` service.
We now also show the top Dismiss/Dismiss New button based on whether the bottom one is in the viewport, not just based on the topic count.
Re-lands the change initially proposed on #8359 but without a new nginx
location block, so it has less change surface.
Co-authored-by: Jeff Wong <awole20@gmail.com>
Co-authored-by: Jeff Wong <awole20@gmail.com>
Not all screen readers treat articles as navigable roles when moving between landmarks. To help with this, we use a `heading` role on the title, with an arbitrary depth of 2 chosen as to not conflict with the main `<h1/>`. Because ARIA roles are used, this change should be entirely non-visual.
While this introduces minor navigation challenges in posts where headers are included, the vast majority of posts don't, and as screen reader users, we're used to mixed headers in longer-form content.
NVDA does not detect HTML5 articles as regions. This explicitly sets a
region with an aria-label denoting post numbers making it much easier to
know where you are in a topic.
Note role: article which is more semantically correct is not respected by
NVDA d/D shortcut, hence the much more generic "region" role.
When slow mode is enabled it's possible to open the slow mode dialog again to disable it or to update slow mode settings. The problem is that in this case, the button for saving still has the label "Enable" which is confusing.
This changes the text on the button from "Enable" to "Update" when slow mode is already enabled.
Based on feedback from Matt Haughey, we don't need to use so many words when describing a deleted topic or post.
Co-authored-by: Martin Brennan <martin@discourse.org>
This allows plugins to store/modify things in the session (e.g. the destination_url). This change is backwards compatible with existing plugins. If they do not specify a third argument, they will just be passed the first two.
If reload a page after enabling slow mode and open the slow mode dialog again it would show a slow mode interval but wouldn't show Enabled Until value. This PR fixes it.
It used to allow adding email addresses to a group even if invites were
disabled for the site. This does not allow user to input email address
if they cannot invite.
The second thing this commit improves is the message that is displayed
to the user when they hit the invite rate limit.
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
This commit fixes an issue where controls scroll in lightboxes with large images (after zooming in)
Before:
05024730b3.mp4
Notice how controls like the close button, the next and previous button, and the image metadata also scroll? This is an undesired behavior.
After:
8047bab735.mp4
This is the desired behavior; only the image should scroll.
The changes in this PR apply to both desktop and mobile.
The problem was we were setting the properties then immediately calling
`refreshRoute` which was being executed before the properties were
settled via the runloop.
Under certain conditions admins would miss messages when posting action in
topics where they have permission.
This also fixes an error where we would sometimes explode when publishing to
an empty group.
> Backtracking re-render refers to a scenario where, in the middle of the rendering process, you have modified something that has already been rendered.
See more details from the Ember team here https://github.com/emberjs/ember.js/issues/13948.
We call _updateInput from init. _updateInput triggers onChangeInput which mutates a date that was given to future-date-input just a moment ago and a rendering cycle wasn't finished yet.
The crash:
```
Uncaught TypeError: Ember.keys is not a function
```
Repro:
- visit home page
- click new topic
- navigate to your messages by clicking your avatar (top right), then enveloppe icon, and finally the bottom chevron
- click New Message
- click cancel in the composer, it should crash
Watched words are always regular expressions, despite watched_words_
_regular_expressions being enabled or not. Internally, wildcard
characters are replaced with a regular expression that matches any non
whitespace character.
This is two fixes:
1. Ember CLI's proxy did not support 3xx redirects so a redirect was
failing.
2. We were not passing query parameters to the `bootstrap.json` endpoint
to correctly handle previewing themes (and other occasional options.)
If you finished reviewing the initially loaded items, and there're more in the queue, load them.
Also, when fast-tracking the pending items updates, use the reviewable_count returned by the perform result. Calling "result.reviewable_count" returns undefines.
This patch remembers the last id for the `file-change` event and uses it
to initialize the client side watcher. This should help fix the issue
where styles are not reloaded client side if the browser refreshed.
* FIX: Hide tag watched words if tagging is disabled
These 'autotag' words were shown even if tagging was disabled.
* FIX: Make autotag watched words case insensitive
This commit also fixes the bug when no tag was applied if no other tag
was already present.
Email change requests are never deleted no matter if they completed
successfully or not. The abandoned requests have the disadvantage of
showing up as unconfirmed emails in user's preferences page.
This is a recent regression introduced by https://github.com/discourse/discourse/pull/12937 which makes it so that when looking at a user profile that is not your own, specifically the category and tag notification settings, you would see your own settings instead of the target user. This is only a problem for admins because regular users cannot see these details for other users.
The issue was that we were using `scope` in the serializer, which refers to the current user, rather than using a scope for the target user via `Guardian.new(user)`.
However, on further inspection the `notification_levels_for` method for `TagUser` and `CategoryUser` did not actually need to be accepting an instance of Guardian, all that it was using it for was to check guardian.anonymous? which is just a fancy way of saying user.blank?. Changed this method to just accept a user instead and send the user in from the serializer.
We have a few places in the code where we need to validate various email related settings, and will have another soon with the improved group email settings UI. This PR introduces a class which can validate POP3, IMAP, and SMTP credentials and also provide a friendly error message for issues if they must be presented to an end user.
This PR does not change any existing code to use the new service. I have added a TODO to change POP3 validation and the email test rake task to use the new validator post-release.
Normally we'd use `ember-auto-import` for this, but it's not run on
our admin tree due to the quirky way we load it conditionally.
Instead we'll append it at the bottom like our Rails app does.
* FIX: Ensure the same email cannot be invited twice
When creating a new invite with a duplicated email, the old invite will
be updated and returned. When updating an invite with a duplicated email
address, an error will be returned.
* FIX: not Ember helper does not exist
* FIX: Sync can_invite_to_forum? and can_invite_to?
The two methods should perform the same basic set of checks, such as
check must_approve_users site setting.
Ideally, one of the methods would call the other one or be merged and
that will happen in the future.
* FIX: Show invite to group if user is group owner
Some themes/components depend on plugins, and it would be impossible to write tests for those themes without installing/loading the plugins they depend on.
Identical callbacks can pile up during tests and cause all sort of weird problems that are difficult to debug. This commit clears registered callbacks after each test.
Recalculating a ReviewableFlaggedPost's score after rejecting or ignoring it sets the score as 0, which means that we can't find them after reviewing. They don't surpass the minimum priority threshold and are hidden.
Additionally, we only want to use agreed flags when calculating the different priority thresholds.
* FIX: ember-cli proxy subfolder fix
* REFACTOR: put rootURL setup in environment, update baseURL logic for subfolder
Correctly have ember understand and parse relative_url_root and use it in
the dev server
Some emails coming in via the mail receiver can still end up
with bad encoding when trying to enqueue the job. This catches
the last encoding issue and forces iso-8559-1 and encodes to
UTF-8 to circumvent the issue.
This was needed to fix a bookmark back button issue but it
broke category topic links, causing a full reload. Now it appears
something has changed in core and this is no longer necessary for
the bookmark back button to work, so I am removing it again.
Currently, when the target is not available we're returning the error message "`You are not permitted to view the requested resource`" which is not clear.
* DEV: add a method of skipping publishing stylesheets afer color scheme save
allows a method to publish all stylesheets if we make changes to many
stylesheets at once
* use after_save_commit for stylesheet change callbacks
This may be more reliable for picking up new stylesheet changes via messagebus
as after_save does not guarantee the updates exists in the DB yet.
* add skip_publish option for create_from_base
* FIX: Cache missing inline oneboxes
Some inline oneboxes were not cached when the server did not return an
answer for an URL and the queried URL and the absolute URL were
different.
For example, if user typed www.example.com, the client asked the server
for http://www.example.com and if the server returned an empty response,
then the client would keep requesting an inline onebox everytime the
composer changed.
In other words, the key used for reading (the absolute URL) and the one
used for writing (the URL as typed by the user) were not the same when
the server returned an empty response.
* DEV: Check cache before making request
There is another cache check in PrettyText, but that is not enough if
multiple requests are pending. This problem was made obvious in tests,
but can happen for users with slow connections.
* FEATURE: Allow sending a message with invite
It used to be a staff-only feature and this commit makes it available
to everyone who can invite.
* FIX: Inviting to topic uses another email template
This used to be the case, but the extra parameter was lost when we
switched to the new modal.
We have found when receiving and posting inbound emails to the handle_mail route, it is better to POST the payload as a base64 encoded string to avoid strange encoding issues. This introduces a new param of `email_encoded` and maintains the legacy param of email, showing a deprecation warning. Eventually the old param of `email` will be dropped and the new one `email_encoded` will be the only way to handle_mail.
The user may have changed their category or tag tracking settings since a topic was tracked/watched based on those settings in the past. In that case we need to alter the reason message we show them otherwise it is very confusing for the end user to be told they are tracking a topic because of a category, when they are no longer tracking that category.
For example: "You will see a count of new replies because you are tracking this category." becomes: "You will see a count of new replies because you were tracking this category in the past."
To do this, it was necessary to add tag and category tracking info to current user serializer. I improved the serializer code so it only does 3 SQL queries instead of 9 to get the tracking information for tags and categories for the current user.
It's been awhile since we have supported IE11 so it should be safe to remove
IntersectionObserver now.
From a TODO task in this repo:
> drop when we eventually drop IE11
Announcement of when we removed IE11 support:
https://meta.discourse.org/t/137984/40?u=blake
See: https://meta.discourse.org/t/navigating-back-to-bookmarks/188912/4
Instead of taking the user back to the bookmark list after selecting
a topic and navigating back, the user was navigated back to the page
before that. This is because the topic-link component was missing
the data-auto-route attribute which tells the intercept-click library
not to use DiscourseURL.routeTo to handle the transition (so it is just
handled internally by Ember)
When editing the files for a theme in the admin dashboard, typing "cmd+s" (a common key-binding to save in most text editors) used to engage the browser's default "save page" dialogue.
This commit adds a key-binding to the ace editor that saves the file.
Now, the "cmd+s" (and "ctrl+s" for windows) key-binding does the same action as the save button.
This commit will add CSS classes like `unlisted`, `pinned`, and `unpinned` on the body tag.
* DEV: we no longer using the `categoryClass` & `tagClasses` methods.
* Update app/assets/javascripts/discourse/app/components/add-topic-status-classes.js
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Uncategorized was sometimes visible even if allow_uncategorized_topics
was false. This was especially happening on mobile, if at least one
topic was uncategorized.
* FIX: Link notification to first unread post
If a topic with a few posts was posted in a watched category or with a
watched tag, the created notification would always point to the last
post, instead of pointing to the first one.
The root cause is that the query that fetched the first unread post
uses 'TopicUser' records and those are not created by default for
user watching a category or tag. In this case, it should use the
'CategoryUser' or 'TagUser' records.
* DEV: Use named bind variables
- better form
- uses d-footer
- ensure buttons have the same height
Note that to achieve same height for btn without text, I made the choice to go for a minimum height which should work in most cases.
* FEATURE: add support for like webhooks
Add support for like webhooks. Webhook events only send on user membership
in the defined webhook group filters.
This also fixes group webhook events, as before this was never used, and
the logic was not correct.
Fixes a bug in user preferences > interface, the light scheme dropdown
was defaulting to "Theme Default" even when the user had selected a
different scheme.
This updates the preview_theme_id preservation logic to use more recent, robust, browser APIs. It also adds support for preserving the `?pp=async-flamegraph` parameter which is proposed in https://github.com/MiniProfiler/rack-mini-profiler/pull/494
If the associated page of a remote url passed to `TopicEmber.new(remote_url)` contained a malformed link like: `<a href="(http://foo.bar)">Baz</a>` it would raise an uncaught exception:
```
Job exception: Invalid scheme format: (http
```
We really want to encourage all developers to use Ember CLI for local
development and testing. This will display an error page if they are not
with instructions on how to start the local server.
To disable it, you can set `NO_EMBER_CLI=1` as an ENV variable
* FEATURE: Small improvements to the topic list embed
- Ability to wrap the list in a custom class so you can styles different
lists using specific CSS
- Adds a topic link to the thumbnail when using the complete template
* FIX: Be more strict about allowed chars in class name
* DEV: refactor font sizing into css custom variables
Add font variables as css variables. Allows plugins/themes to update/overwrite the variables and have core pick up changes. This allows for a theme or plugin to overhaul core's font ratios if desired.
Checking for remote should cleanup after itself. Currently each check litters
the /tmp filesystem with checkouts. This patch ensures that update checks
keep the system a bit tidier.
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
The message in logs will now look like:
```
BadgeGranter::GrantError: Failed to backfill 'Some Badge' badge: {:post_ids=>[]}. Reason: ERROR: column "email" does not exist
LINE 6: ...t id as user_id, current_timestamp as granted_at, email from...
```
Bianca Nenciu
Andrei Prigorshnev
Dan Ungureanu
Alan Guo Xiang Tan
Martin Brennan
Kris
Gerhard Schlager
Robin Ward
Penar Musaraj
Jarek Radosz
Meghna
Joffrey JAFFEUX
Sam
Krzysztof Kotlarek
Roman Rizzi
Faizaan Gagan
Osama Sayegh
Jordan Vidrine
Vinoth Kannan
David Taylor
Rafael dos Santos Silva
Nolan Darilek
Mark VanLandingham
Jeff Atwood
Jeff Wong
Josh Soref
Joe
Arpit Jalan
zacholas
Blake Erickson
Hariraj Venkatesan
Grayden
webdirektindia