There have been too many flaky tests as a result of leaking state in
Redis so it is easier to resolve them by ensuring we flush Redis'
database.
Locally on my machine, calling `Discourse.redis.flushdb` takes around
0.1ms which means this change will have very little impact on test
runtimes.
A new admin setting called `enforce_second_factor_on_external_auth`. It allows users to authenticate using external providers even when 2FA is forced with `enforce_second_factor` site setting.
If configuring only moderators in a group based access setting, the mapping to the old setting wouldn't work correctly, because the case was unaccounted for.
This PR accounts for moderators group when doing the mapping.
These tests are still flaky (order dependence) just that now it doesn't fail the test, instead it creates an infinite loop. Skipping these for now. We know they work because they pass, but they leak into other tests. I think we can re-enable locally and either fix or remove this once TL migration is done.
There's a leaky test that breaks some controller tests if run first, creating an order-dependent flake.
This change fixes that, but in doing so also skips a low-value test that breaks from the fix. (Verified manually that it's working.)
When setting an old TL based site setting in the console e.g.:
SiteSetting.min_trust_level_to_allow_ignore = TrustLevel[3]
We will silently convert this to the corresponding Group::AUTO_GROUP. And vice-versa, when we read the value on the old setting, we will automatically get the lowest trust level corresponding to the lowest auto group for the new setting in the database.
When we started using NumberField for integer site settings
in e113eff663, we did not end up
passing down a min/max value for the integer to the field, which
meant that for some fields where negative numbers were allowed
we were not accepting that as valid input.
This commit passes down the min/max options from the server for
integer settings then in turn passes them down to NumberField.
c.f. https://meta.discourse.org/t/delete-user-self-max-post-count-not-accepting-1-to-disable/285162
The most common thing that we do with fab! is:
fab!(:thing) { Fabricate(:thing) }
This commit adds a shorthand for this which is just simply:
fab!(:thing)
i.e. If you omit the block, then, by default, you'll get a `Fabricate`d object using the fabricator of the same name.
Plugins can use a new modifier to change which site settings are hidden using the :hidden_site_settings modifier. For example:
```
register_modifier(:hidden_site_settings) do |hidden|
(hidden + [:invite_only, :login_required]).uniq
end
```
Plugins can use a new modifier to change which site settings are
hidden using the :hidden_site_settings modifier. For example:
register_modifier(:hidden_site_settings) do |hidden|
(hidden + [:invite_only, :login_required]).uniq
end
AWS recommends running buckets without ACLs, and to use resource policies to manage access control instead.
This is not a bad idea, because S3 ACLs are whack, and while resource policies are also whack, they're a more constrained form of whack.
Further, some compliance regimes get antsy if you don't go with the vendor's recommended settings, and arguing that you need to enable ACLs on a bucket just to store images in there is more hassle than it's worth.
The new site setting (s3_use_acls) cannot be disabled when secure
uploads is enabled -- the latter relies on private ACLs for security
at this point in time. We may want to reexamine this in future.
When we renamed the `default_categories_regular` to `default_categories_normal` we missed a site setting validation method. It allowed the duplicate category ids in `default_categories_normal` site setting and caused the problem in user registration process.
5176c689e9
This commit renames all secure_media related settings to secure_uploads_* along with the associated functionality.
This is being done because "media" does not really cover it, we aren't just doing this for images and videos etc. but for all uploads in the site.
Additionally, in future we want to secure more types of uploads, and enable a kind of "mixed mode" where some uploads are secure and some are not, so keeping media in the name is just confusing.
This also keeps compatibility with the `secure-media-uploads` path, and changes new
secure URLs to be `secure-uploads`.
Deprecated settings:
* secure_media -> secure_uploads
* secure_media_allow_embed_images_in_emails -> secure_uploads_allow_embed_images_in_emails
* secure_media_max_email_embed_image_size_kb -> secure_uploads_max_email_embed_image_size_kb
Twitter does not allow SVGs to be used for twitter:image
metadata (see https://developer.twitter.com/en/docs/twitter-for-websites/cards/overview/markup)
so we should fall back to the site logo if the image option
provided to `crawlable_meta_data` or SiteSetting.site_twitter_summary_large_image_url
is an SVG, and do not add the meta tag for twitter:image at all
if the site logo is an SVG.
Admins won't be able to disable strip_image_metadata if they don't
disable composer_media_optimization_image_enabled first since the later
will strip the same metadata on client during upload, making disabling
the former have no effect.
Bug report at https://meta.discourse.org/t/-/223350
There are still some, but those are in actual code that's used outside core, so the change there would need to go through the deprecation cycle. That's a task for another day.
It's very easy to forget to add `require 'rails_helper'` at the top of every core/plugin spec file, and omissions can cause some very confusing/sporadic errors.
By setting this flag in `.rspec`, we can remove the need for `require 'rails_helper'` entirely.
We have a couple of site setting, `slow_down_crawler_user_agents` and `slow_down_crawler_rate`, that are meant to allow site owners to signal to specific crawlers that they're crawling the site too aggressively and that they should slow down.
When a crawler is added to the `slow_down_crawler_user_agents` setting, Discourse currently adds a `Crawl-delay` directive for that crawler in `/robots.txt`. Unfortunately, many crawlers don't support the `Crawl-delay` directive in `/robots.txt` which leaves the site owners no options if a crawler is crawling the site too aggressively.
This PR replaces the `Crawl-delay` directive with proper rate limiting for crawlers added to the `slow_down_crawler_user_agents` list. On every request made by a non-logged in user, Discourse will check the User Agent string and if it contains one of the values of the `slow_down_crawler_user_agents` list, Discourse will only allow 1 request every N seconds for that User Agent (N is the value of the `slow_down_crawler_rate` setting) and the rest of requests made within the same interval will get a 429 response.
The `slow_down_crawler_user_agents` setting becomes quite dangerous with this PR since it could rate limit lots if not all of anonymous traffic if the setting is not used appropriately. So to protect against this scenario, we've added a couple of new validations to the setting when it's changed:
1) each value added to setting must 3 characters or longer
2) each value cannot be a substring of tokens found in popular browser User Agent. The current list of prohibited values is: apple, windows, linux, ubuntu, gecko, firefox, chrome, safari, applewebkit, webkit, mozilla, macintosh, khtml, intel, osx, os x, iphone, ipad and mac.
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
There are issues around displaying images on published pages when secure media is enabled. This PR temporarily makes it appear as if published pages are enabled if secure media is also enabled.
* FIX: second factor cannot be enabled if SSO is enabled
If `enable_sso` setting is enabled then admin should not be able to
enable `enforce_second_factor` setting as that will lock users out.
Co-authored-by: Robin Ward <robin.ward@gmail.com>
The secure media functionality relied on `SiteSetting.enable_s3_uploads?` which, as we found in dev, did not take into account global S3 settings via `GlobalSetting.use_s3?`. We now use `SiteSetting.Upload.enable_s3_uploads` instead to be more consistent.
Also, we now validate `enable_s3_uploads` changes, because if `GlobalSetting.use_s3?` is true users should NOT be enabling S3 uploads manually.
It was possible to add a category to more than one default group, e.g. "default categories muted" and "default categories watching first post".
The bug was caused by category validations inadvertently comparing strings and numbers.
This is a low severity security fix because it requires a logged in
admin user to update a site setting via the API directly to an invalid
value.
The fix adds validation for the affected site settings, as well as a
secondary fix to prevent injection in the event of bad data somehow
already exists.
This removes all uses of both `send` and `public_send` from consumers of
SiteSetting and instead introduces a `get` helper for dynamic lookup
This leads to much cleaner and safer code long term as we are always explicit
to test that a site setting is really there before sending an arbitrary
string to the class
It also removes a couple of risky stubs from the auth provider test
This change both speeds up specs (less strings to allocate) and helps catch
cases where methods in Discourse are mutating inputs.
Overall we will be migrating everything to use #frozen_string_literal: true
it will take a while, but this is the first and safest move in this direction
This validation makes sure that the s3_upload_bucket and the
s3_backup_bucket have different values. The backup bucket is
allowed to be a subfolder of the upload bucket. The other way
around is forbidden because the backup system searches by
prefix and would return all files stored within the backup
bucket and its subfolders.
Alan Guo Xiang Tan
Krzysztof Kotlarek
Ted Johansson
Martin Brennan
Blake Erickson
Kelv
Daniel Waterworth
Neil Lalonde
Loïc Guitaut
Jean
Matt Palmer
David Taylor
Vinoth Kannan
Jarek Radosz
Phil Pirozhkov
Rafael dos Santos Silva
Osama Sayegh
Martin Brennan
Vinoth Kannan
Arpit Jalan
Mark VanLandingham
Robin Ward
Sam Saffron
Gerhard Schlager