Commit Graph

38 Commits

Author SHA1 Message Date
Phil Pirozhkov 493d437e79
Add RSpec 4 compatibility (#17652)
* Remove outdated option

04078317ba

* Use the non-globally exposed RSpec syntax

https://github.com/rspec/rspec-core/pull/2803

* Use the non-globally exposed RSpec syntax, cont

https://github.com/rspec/rspec-core/pull/2803

* Comply to strict predicate matchers

See:
 - https://github.com/rspec/rspec-expectations/pull/1195
 - https://github.com/rspec/rspec-expectations/pull/1196
 - https://github.com/rspec/rspec-expectations/pull/1277
2022-07-28 10:27:38 +08:00
Loïc Guitaut 91b6b5eee7 DEV: Don’t use `change { … }.by(0)` in specs 2022-07-26 10:34:15 +02:00
Bianca Nenciu 9db8f00b3d
FEATURE: Create upload_references table (#16146)
This table holds associations between uploads and other models. This can be used to prevent removing uploads that are still in use.

* DEV: Create upload_references
* DEV: Use UploadReference instead of PostUpload
* DEV: Use UploadReference for SiteSetting
* DEV: Use UploadReference for Badge
* DEV: Use UploadReference for Category
* DEV: Use UploadReference for CustomEmoji
* DEV: Use UploadReference for Group
* DEV: Use UploadReference for ThemeField
* DEV: Use UploadReference for ThemeSetting
* DEV: Use UploadReference for User
* DEV: Use UploadReference for UserAvatar
* DEV: Use UploadReference for UserExport
* DEV: Use UploadReference for UserProfile
* DEV: Add method to extract uploads from raw text
* DEV: Use UploadReference for Draft
* DEV: Use UploadReference for ReviewableQueuedPost
* DEV: Use UploadReference for UserProfile's bio_raw
* DEV: Do not copy user uploads to upload references
* DEV: Copy post uploads again after deploy
* DEV: Use created_at and updated_at from uploads table
* FIX: Check if upload site setting is empty
* DEV: Copy user uploads to upload references
* DEV: Make upload extraction less strict
2022-06-09 09:24:30 +10:00
David Taylor c9dab6fd08
DEV: Automatically require 'rails_helper' in all specs (#16077)
It's very easy to forget to add `require 'rails_helper'` at the top of every core/plugin spec file, and omissions can cause some very confusing/sporadic errors.

By setting this flag in `.rspec`, we can remove the need for `require 'rails_helper'` entirely.
2022-03-01 17:50:50 +00:00
Bianca Nenciu 5eaf214594
FEATURE: New plugin API to check if upload is used (#15545)
This commit introduces two new APIs for handling unused uploads, one
can be used to exclude uploads in bulk when the data model allow and
the other one excludes uploads one by one.
2022-02-16 09:00:30 +02:00
Vinoth Kannan a6de4a5ce9
DEV: use upload id to save in theme setting instead of URL. (#14341)
When we use URL instead it creates the problem while changing the CDN hostname.
2021-09-16 07:58:53 +05:30
Martin Brennan b500949ef6
FEATURE: Initial implementation of direct S3 uploads with uppy and stubs (#13787)
This adds a few different things to allow for direct S3 uploads using uppy. **These changes are still not the default.** There are hidden `enable_experimental_image_uploader` and `enable_direct_s3_uploads`  settings that must be turned on for any of this code to be used, and even if they are turned on only the User Card Background for the user profile actually uses uppy-image-uploader.

A new `ExternalUploadStub` model and database table is introduced in this pull request. This is used to keep track of uploads that are uploaded to a temporary location in S3 with the direct to S3 code, and they are eventually deleted a) when the direct upload is completed and b) after a certain time period of not being used. 

### Starting a direct S3 upload

When an S3 direct upload is initiated with uppy, we first request a presigned PUT URL from the new `generate-presigned-put` endpoint in `UploadsController`. This generates an S3 key in the `temp` folder inside the correct bucket path, along with any metadata from the clientside (e.g. the SHA1 checksum described below). This will also create an `ExternalUploadStub` and store the details of the temp object key and the file being uploaded.

Once the clientside has this URL, uppy will upload the file direct to S3 using the presigned URL. Once the upload is complete we go to the next stage.

### Completing a direct S3 upload

Once the upload to S3 is done we call the new `complete-external-upload` route with the unique identifier of the `ExternalUploadStub` created earlier. Only the user who made the stub can complete the external upload. One of two paths is followed via the `ExternalUploadManager`.

1. If the object in S3 is too large (currently 100mb defined by `ExternalUploadManager::DOWNLOAD_LIMIT`) we do not download and generate the SHA1 for that file. Instead we create the `Upload` record via `UploadCreator` and simply copy it to its final destination on S3 then delete the initial temp file. Several modifications to `UploadCreator` have been made to accommodate this.

2. If the object in S3 is small enough, we download it. When the temporary S3 file is downloaded, we compare the SHA1 checksum generated by the browser with the actual SHA1 checksum of the file generated by ruby. The browser SHA1 checksum is stored on the object in S3 with metadata, and is generated via the `UppyChecksum` plugin. Keep in mind that some browsers will not generate this due to compatibility or other issues.

    We then follow the normal `UploadCreator` path with one exception. To cut down on having to re-upload the file again, if there are no changes (such as resizing etc) to the file in `UploadCreator` we follow the same copy + delete temp path that we do for files that are too large.

3. Finally we return the serialized upload record back to the client

There are several errors that could happen that are handled by `UploadsController` as well.

Also in this PR is some refactoring of `displayErrorForUpload` to handle both uppy and jquery file uploader errors.
2021-07-28 08:42:25 +10:00
Osama Sayegh a23d0f9961
UX: Add image uploader widget for uploading badge images (#12377)
Currently the process of adding a custom image to badge is quite clunky; you have to upload your image to a topic, and then copy the image URL and pasting it in a text field. Besides being clucky, if the topic or post that contains the image is deleted, the image will be garbage-collected in a few days and the badge will lose the image because the application is not that the image is referenced by a badge.

This commit improves that by adding a proper image uploader widget for badge images.
2021-03-17 08:55:23 +03:00
David Taylor 4430bc153d
FIX: Do not clean up uploads when they're used by theme settings (#12326)
We intend to move ThemeSetting to use an upload_id column, rather than storing the URL. So this is a short-term solution.
2021-03-09 19:16:45 +00:00
Bianca Nenciu 25b8ed740b
DEV: Make site setting type uploaded_image_list use upload IDs (#10401)
It used to be a list of concatenated upload URLs which was prone to
break.
2020-10-13 16:17:06 +03:00
Guo Xiang Tan 3370ef188e
FEATURE: Remove deprecated uploads url site settings.
The site settings have been replaced with direct image upload since
Discourse 2.3.
2020-06-22 14:32:29 +08:00
Martin Brennan 7c32411881
FEATURE: Secure media allowing duplicated uploads with category-level privacy and post-based access rules (#8664)
### General Changes and Duplication

* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file. 
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.

### Viewing Secure Media

* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`

### Removed

We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.

* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
2020-01-16 13:50:27 +10:00
Sam Saffron 3d85cc1e69 PERF: run expensive clean up uploads less frequently
Previously every hour we would run a full scan of the entire DB searching
for expired uploads that need to be moved to the tombstone folder.

This commit amends it so we only run the job 2 times per clean_orpha_uploads_grace_period_hours

There is a upper bound of 7 days so even if the grace period is set really
high it will still run at least once a week.

By default we have a 48 grace period so this amends it to run this cleanup
daily instead of hourly. This eliminates 23 times we run this ultra expensive
query.
2019-10-28 11:14:52 +11:00
Krzysztof Kotlarek 427d54b2b0 DEV: Upgrading Discourse to Zeitwerk (#8098)
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains. 

We no longer need to use Rails "require_dependency" anywhere and instead can just use standard 
Ruby patterns to require files.

This is a far reaching change and we expect some followups here.
2019-10-02 14:01:53 +10:00
Guo Xiang Tan 24347ace10 FIX: Properly associate user_profiles background urls via upload id.
`Upload#url` is more likely and can change from time to time. When it
does changes, we don't want to have to look through multiple tables to
ensure that the URLs are all up to date. Instead, we simply associate
uploads properly to `UserProfile` so that it does not have to replicate
the URLs in the table.
2019-05-02 14:58:24 +08:00
Sam Saffron 4ea21fa2d0 DEV: use #frozen_string_literal: true on all spec
This change both speeds up specs (less strings to allocate) and helps catch
cases where methods in Discourse are mutating inputs.

Overall we will be migrating everything to use #frozen_string_literal: true
it will take a while, but this is the first and safest move in this direction
2019-04-30 10:27:42 +10:00
Sam Saffron 45285f1477 DEV: remove update_attributes which is deprecated in Rails 6
See: https://github.com/rails/rails/pull/31998

update_attributes is a relic of the past, it should no longer be used.
2019-04-29 17:32:25 +10:00
Daniel Waterworth ad44243a57 Removed unused let blocks (#7446)
The bodies of these blocks were never evaluated.
2019-04-29 15:08:56 +08:00
Guo Xiang Tan afbf852e0e DEV: Add specs for cleaning up uploads in non pending reviable posts.
Follow up to f7ebfb1acc
2019-04-15 09:20:34 +08:00
Robin Ward b58867b6e9 FEATURE: New 'Reviewable' model to make reviewable items generic
Includes support for flags, reviewable users and queued posts, with REST API
backwards compatibility.

Co-Authored-By: romanrizzi <romanalejandro@gmail.com>
Co-Authored-By: jjaffeux <j.jaffeux@gmail.com>
2019-03-28 12:45:10 -04:00
Guo Xiang Tan b0c8fdd7da FIX: Properly support defaults for upload site settings. 2019-03-13 16:36:57 +08:00
Guo Xiang Tan eecd1a7d8c FIX: `Jobs::CleanUpUploads` fails when value of upload data_type is an empty string. 2018-11-30 10:46:39 +08:00
Guo Xiang Tan 44391ee8ab
FEATURE: Upload Site Settings. (#6573) 2018-11-14 15:03:02 +08:00
Guo Xiang Tan 7b44339529 FIX: Prevent uploads used in site settings from being deleted. 2018-11-13 09:15:16 +08:00
Régis Hanol 6d6e026e3c FEATURE: selectable avatars 2018-07-18 12:57:43 +02:00
Guo Xiang Tan aaea24448e DEV: Add specs for 085eaaf18d. 2018-06-05 10:03:26 +08:00
Arpit Jalan 91bf10bd12 FIX: create upload record for exported csv files 2018-04-20 00:27:49 +05:30
Régis Hanol 7370adeae3 FIX: don't delete uploads referenced in drafts or queued posts when using the short_url 2017-11-13 15:01:31 +01:00
Régis Hanol e8f0771dc9 FIX: the 'clean_up_uploads' jobs would delete images used in site settings
when they were entered using absolute URLs, with the CDN or simple a different format than the one used in the database
2017-06-07 22:53:15 +02:00
Guo Xiang Tan 1a7e954e09 FIX: Store custom emojis as uploads.
* Depending on a hardcoded directory was a flawed design
  which made it impossible to debug when custom emojis go
  missing.
2017-03-14 13:07:18 +08:00
Guo Xiang Tan 9a800107cb FIX: Associate category logo and background to uploads record. 2016-12-12 17:37:28 +08:00
Guo Xiang Tan f03d9cad06 PERF: `NOT IN` query is really inefficient for large tables. 2016-11-02 13:09:18 +08:00
Robin Ward af83c8dc14 Upload Logos Step 2016-09-22 09:52:19 -04:00
Régis Hanol c591429868 FIX: don't destroy uploads in queued posts and drafts 2016-08-01 18:35:57 +02:00
Guo Xiang Tan bd07658a37
PERF: Split queries when cleaning uploads.
This reduces the number of scans that the db has to do in the query
to fetch orphan uploads. Futheremore, we were not batching our
records which bloats memory.
2016-07-04 16:34:32 +08:00
Régis Hanol e9a293beeb FIX: clean up uploads job 2016-06-20 22:05:41 +02:00
Andy Waite 3e50313fdc Prepare for separation of RSpec helper files
Since rspec-rails 3, the default installation creates two helper files:
* `spec_helper.rb`
* `rails_helper.rb`

`spec_helper.rb` is intended as a way of running specs that do not
require Rails, whereas `rails_helper.rb` loads Rails (as Discourse's
current `spec_helper.rb` does).

For more information:

https://www.relishapp.com/rspec/rspec-rails/docs/upgrade#default-helper-files

In this commit, I've simply replaced all instances of `spec_helper` with
`rails_helper`, and renamed the original `spec_helper.rb`.

This brings the Discourse project closer to the standard usage of RSpec
in a Rails app.

At present, every spec relies on loading Rails, but there are likely
many that don't need to. In a future pull request, I hope to introduce a
separate, minimal `spec_helper.rb` which can be used in tests which
don't rely on Rails.
2015-12-01 20:39:42 +00:00
Sam 58eabb03e5 FEATURE: api support for arbitrary unlinked assets
admins can set retain periods for assets
2014-09-23 16:50:17 +10:00