This commit introduces our own handling and warning for Sidekiq's new 'non-json-serializable' warning. This decouples us from Sidekiq's own deprecation cycle, and allows us to use our own deprecation system. It also means that the dump/parse happens in test mode, which will help us to catch occurrences before they reach production.
Job arguments go via JSON, and so symbols will appear as strings in the Job's `#execute` method. The latest version of Sidekiq has started warning about this to reduce developer confusion.
The latest version of Sidekiq introduced a warning when jobs are queued with arguments which 'do not stringify to JSON safely'. In the vast majority of cases, this is because a hash is passed with symbols as keys. When those args are passed to the job, the keys will be stringified.
Our job wrapper already takes care of this issue by calling '.with_indifferent_access' on the args before passing them to `#execute`, so we don't need to change anything about our use. All we need to do is satisfy Sidekiq's warning system by 'stringifying' all the keys before enqueuing the job.
* File.exists? is deprecated and removed in Ruby 3.2 in favor of
File.exist?
* Dir.exists? is deprecated and removed in Ruby 3.2 in favor of
Dir.exist?
This commit introduces scheduled problem checks for the admin dashboard, which are long running or otherwise cumbersome problem checks that will be run every 10 minutes rather than every time the dashboard is loaded. If these scheduled checks add a problem, the problem will remain until it is cleared or until the scheduled job runs again.
An example of a check that should be scheduled is validating credentials against an external provider.
This commit also introduces the concept of a `priority` to the problems generated by `AdminDashboardData` and the scheduled checks. This is `low` by default, and can be set to `high`, but this commit does not change any part of the UI with this information, only adds a CSS class.
I will be making a follow up PR to check group SMTP credentials.
We send the reminder using the GroupMessage class, which supports removing previous messages. We can't match them by raw because they could mention different moderators. Also, I had to change the subject to remove dynamically generated values, which is necessary for finding them.
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
Old OnceOff job could perform pretty slowly on sites with millions of emails
New implementation operates in batches in a migration, minimizing locking.
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.
To sum up, this commit:
* Adds token_hash and scope to email_tokens
* Reuses code that schedules critical_user_email
* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods
* Periodically cleans old, unconfirmed or expired email tokens
When this setting is turned on, it will check that normalized emails
are unique. Normalized emails are emails without any dots or plus
aliases.
This setting can be used to block use of aliases of the same email
address.
Sometimes, a user may have a malformed email such as
`test@test.com<mailto:test@test.com` their email address,
and as a topic participant will be included as a CC email
when sending a GroupSmtpEmail. This causes the CC parsing to
fail and further down the line in Email::Sender the code
to check the CC addresses expects an array but gets a string
instead because of the parse failure.
Instead, we can just check if the CC addresses are valid
and drop them if they are not in the GroupSmtpEmail job.
An upstream validation bug in the aws-sdk-sns library could enable RCE under certain circumstances. This commit updates the upstream gem, and adds additional validation to provide defense-in-depth.
This reverts commit f5cf647e57.
The gem breaks usage of Rails URL helpers when used outside views and
controllers, for example in
88ecb83382/app/models/upload.rb (L239-L242)
the `upload_short_path` method call fails with an undefined method
exception when this gem is enabled.
The lazy route initialization cuts down boot time of rails.
On my local system it cuts out 200ms of boot time taking me from 3.2 to 3 seconds.
This is not a radically enormous amount of time, but paper cuts add up, and a faster boot in dev will make everyone happy.
TBD if we want to also include this in production.
Gem is heavily maintained by @amatsuda, last commit 3 days ago.
We don't actually use the reminder_type for bookmarks anywhere;
we are just storing it. It has no bearing on the UI. It used
to be relevant with the at_desktop bookmark reminders (see
fa572d3a7a)
This commit marks the column as readonly, ignores it, and removes
the index, and it will be dropped in a later PR. Some plugins
are relying on reminder_type partially so some stubs have been
left in place to avoid errors.
We don't need no stinkin' denormalization! This commit ignores
the topic_id column on bookmarks, to be deleted at a later date.
We don't really need this column and it's better to rely on the
post.topic_id as the canonical topic_id for bookmarks, then we
don't need to remember to update both columns if the bookmarked
post moves to another topic.
Discourse is sending regularly message to admins when potential problems are persisted. Most of the time they have exactly the same content. In that case, when there are no replies, the old one should be trashed before a new one is created.
PresenceChannel aims to be a generic system for allow the server, and end-users, to track the number and identity of users performing a specific task on the site. For example, it might be used to track who is currently 'replying' to a specific topic, editing a specific wiki post, etc.
A few key pieces of information about the system:
- PresenceChannels are identified by a name of the format `/prefix/blah`, where `prefix` has been configured by some core/plugin implementation, and `blah` can be any string the implementation wants to use.
- Presence is a boolean thing - each user is either present, or not present. If a user has multiple clients 'present' in a channel, they will be deduplicated so that the user is only counted once
- Developers can configure the existence and configuration of channels 'just in time' using a callback. The result of this is cached for 2 minutes.
- Configuration of a channel can specify permissions in a similar way to MessageBus (public boolean, a list of allowed_user_ids, and a list of allowed_group_ids). A channel can also be placed in 'count_only' mode, where the identity of present users is not revealed to end-users.
- The backend implementation uses redis lua scripts, and is designed to scale well. In the future, hard limits may be introduced on the maximum number of users that can be present in a channel.
- Clients can enter/leave at will. If a client has not marked itself 'present' in the last 60 seconds, they will automatically 'leave' the channel. The JS implementation takes care of this regular check-in.
- On the client-side, PresenceChannel instances can be fetched from the `presence` ember service. Each PresenceChannel can be used entered/left/subscribed/unsubscribed, and the service will automatically deduplicate information before interacting with the server.
- When a client joins a PresenceChannel, the JS implementation will automatically make a GET request for the current channel state. To avoid this, the channel state can be serialized into one of your existing endpoints, and then passed to the `subscribe` method on the channel.
- The PresenceChannel JS object is an ember object. The `users` and `count` property can be used directly in ember templates, and in computed properties.
- It is important to make sure that you `unsubscribe()` and `leave()` any PresenceChannel objects after use
An example implementation may look something like this. On the server:
```ruby
register_presence_channel_prefix("site") do |channel|
next nil unless channel == "/site/online"
PresenceChannel::Config.new(public: true)
end
```
And on the client, a component could be implemented like this:
```javascript
import Component from "@ember/component";
import { inject as service } from "@ember/service";
export default Component.extend({
presence: service(),
init() {
this._super(...arguments);
this.set("presenceChannel", this.presence.getChannel("/site/online"));
},
didInsertElement() {
this.presenceChannel.enter();
this.presenceChannel.subscribe();
},
willDestroyElement() {
this.presenceChannel.leave();
this.presenceChannel.unsubscribe();
},
});
```
With this template:
```handlebars
Online: {{presenceChannel.count}}
<ul>
{{#each presenceChannel.users as |user|}}
<li>{{avatar user imageSize="tiny"}} {{user.username}}</li>
{{/each}}
</ul>
```
This bug was introduced by f66007ec83.
In PostJobsEnqueuer we previously did not fire the after_post_create
event and after_topic_create event for private message topics. This was
changed in the above commit in order to publish message bus messages
for topic tracking state updates. Unfortunately this caused the
NotifyMailingListSubscribers job to be enqueued for all posts including
private messages, and admins and the users involved in the PMs got
emailed the contents of the PMs if they had mailing list mode enabled.
Luckily the impact of this was mitigated by a Guardian#can_see? check
for each mailing list mode user in the NotifyMailingListSubscribers job.
We never want to notify mailing list mode subscribers for private messages
so an early return has been added there, plus the logic in PostJobsEnqueuer
has been fixed, and tests have been added to that class where there were
none before.
There are certain design decisions that were made in this commit.
Private messages implements its own version of topic tracking state because there are significant differences between regular and private_message topics. Regular topics have to track categories and tags while private messages do not. It is much easier to design the new topic tracking state if we maintain two different classes, instead of trying to mash this two worlds together.
One MessageBus channel per user and one MessageBus channel per group. This allows each user and each group to have their own channel backlog instead of having one global channel which requires the client to filter away unrelated messages.
This adds a few different things to allow for direct S3 uploads using uppy. **These changes are still not the default.** There are hidden `enable_experimental_image_uploader` and `enable_direct_s3_uploads` settings that must be turned on for any of this code to be used, and even if they are turned on only the User Card Background for the user profile actually uses uppy-image-uploader.
A new `ExternalUploadStub` model and database table is introduced in this pull request. This is used to keep track of uploads that are uploaded to a temporary location in S3 with the direct to S3 code, and they are eventually deleted a) when the direct upload is completed and b) after a certain time period of not being used.
### Starting a direct S3 upload
When an S3 direct upload is initiated with uppy, we first request a presigned PUT URL from the new `generate-presigned-put` endpoint in `UploadsController`. This generates an S3 key in the `temp` folder inside the correct bucket path, along with any metadata from the clientside (e.g. the SHA1 checksum described below). This will also create an `ExternalUploadStub` and store the details of the temp object key and the file being uploaded.
Once the clientside has this URL, uppy will upload the file direct to S3 using the presigned URL. Once the upload is complete we go to the next stage.
### Completing a direct S3 upload
Once the upload to S3 is done we call the new `complete-external-upload` route with the unique identifier of the `ExternalUploadStub` created earlier. Only the user who made the stub can complete the external upload. One of two paths is followed via the `ExternalUploadManager`.
1. If the object in S3 is too large (currently 100mb defined by `ExternalUploadManager::DOWNLOAD_LIMIT`) we do not download and generate the SHA1 for that file. Instead we create the `Upload` record via `UploadCreator` and simply copy it to its final destination on S3 then delete the initial temp file. Several modifications to `UploadCreator` have been made to accommodate this.
2. If the object in S3 is small enough, we download it. When the temporary S3 file is downloaded, we compare the SHA1 checksum generated by the browser with the actual SHA1 checksum of the file generated by ruby. The browser SHA1 checksum is stored on the object in S3 with metadata, and is generated via the `UppyChecksum` plugin. Keep in mind that some browsers will not generate this due to compatibility or other issues.
We then follow the normal `UploadCreator` path with one exception. To cut down on having to re-upload the file again, if there are no changes (such as resizing etc) to the file in `UploadCreator` we follow the same copy + delete temp path that we do for files that are too large.
3. Finally we return the serialized upload record back to the client
There are several errors that could happen that are handled by `UploadsController` as well.
Also in this PR is some refactoring of `displayErrorForUpload` to handle both uppy and jquery file uploader errors.
* FIX: Clear stale status of reloaded reviewables
Navigating away from and back to the reviewables reloaded Reviewable
records, but did not clear the "stale" attribute.
* FEATURE: Show user who last acted on reviewable
When a user acts on a reviewable, all other clients are notified and a
generic "reviewable was resolved by someone" notice was shown instead of
the buttons. There is no need to keep secret the username of the acting
user.
Currently when bulk-awarding a badge that can be granted multiple times, users in the CSV file are granted the badge once no matter how many times they're listed in the file and only if they don't have the badge already.
This PR adds a new option to the Badge Bulk Award feature so that it's possible to grant users a badge even if they already have the badge and as many times as they appear in the CSV file.
This PR fixes a couple of issues related to group SMTP:
1. When running the group SMTP job, we were exiting early if the email was for the OP because of an IMAP race condition. However this causes issues when replying as a new topic for an existing SMTP topic, as the recipient does not get the OP email which can cause threading problems.
2. When sending emails for a new topic spun out like the issue in 1., we are not maintaining the original subject/topic title because that is based on the incoming email record, which we were not doing because the group SMTP email was never sent because of issue 1.
There was an issue with the TopicTimerEnqueuer where any timer
that failed to enqueue_typed_job with an error would prevent
all other pending timers after the one that errored from running.
To mitigate this we just capture the error and log it (so we can
still fix it if needed for bug crushing) and proceed with the
rest of the timer enqueues.
The commit https://github.com/discourse/discourse/pull/13544 highlighted
this issue originally in hosted sites.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
Use the `sidekiq_retry_in` code from Jobs::UserEmail in group SMTP. Also we don't need to keep `seconds_to_delay` -- sidekiq uses the default delay calculation if you return 0 or nil from the block. See 3330df0ee3/lib/sidekiq/job_retry.rb (L216-L234) for sidekiq default retry delay logic.
I experimented with extracting this into a concern or a module, but `sidekiq_retry_in` is quite magic and it would not allow me to abstract away into a module that calls some method specificall in the child job class.
I would love to write tests for this, but it does not seem possible (not sure if its because of our test
setup) to write tests that test sidekiq's retry capability, and I am not sure if we should be anyway. Initial addition
to UserEmail did not test this functionality
d224966a0e
Skip group SMTP email (and add log) if:
* topic is deleted
* post is deleted
* smtp has been disabled for the group
Skip without log if:
* enable_smtp site setting is false
* disable_emails site setting is yes
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This PR backtracks a fair bit on this one https://github.com/discourse/discourse/pull/13220/files.
Instead of sending the group SMTP email for each user via `UserNotifications`, we are changing to send only one email with the existing `Jobs::GroupSmtpEmail` job and `GroupSmtpMailer`. We are changing this job and mailer along with `PostAlerter` to make the first topic allowed user the `to_address` for the email and any other `topic_allowed_users` to be the CC address on the email. This is to cut down on emails sent via SMTP, which is subject to daily limits from providers such as Gmail. We log these details in the `EmailLog` table now.
In addition to this, we have changed `PostAlerter` to no longer rely on incoming email email addresses for sending the `GroupSmtpEmail` job. This was unreliable as a user's email could have changed in the meantime. Also it was a little overcomplicated to use the incoming email records -- it is far simpler to reason about to just use topic allowed users.
This also adds a fix to include cc_addresses in the EmailLog.addressed_to_user scope.
* FEATURE: Staff can receive pending user reminders more frequently.
We now express the "pending_users_reminder_delay" in minutes instead of hours so staff can have finer control over the delay.
We need to keep in mind that the reminders could still take up to 20 minutes, even when using a lower value. We send them from a scheduled job.
* Migrate to a new site setting for the reminders delay
ATM it only implements server side of it, as my need is for automation purposes. However it should probably be added in the UI too as it's unexpected to have pinned_until and no bannered_until.
Anonymizing a user changed their email address, destroyed all
associated InvitedUser records, but did not destroy the invites
associated to user's email.
When we call Bookmark.cleanup! we want to make sure that
topic_user.bookmarked is updated for topics linked to the
bookmarks that were deleted. Also when PostDestroyer calls
destroy and recover. We have a job for this already --
SyncTopicUserBookmarked -- so we just utilize that.
Subclasses must call #delete_user_actions inside build_actions to support user deletion. The method adds a delete user bundle, which has a delete and a delete + block option. Every subclass is responsible for implementing these actions.
Notifying about a tag change sometimes resulted in loading a large
number of users in memory just to perform an exclusion. This commit
prefers to do inclusion (i.e. instead of exclude users X, do include
users in groups Y) and does it in SQL to avoid fetching unnecessary
data that is later discarded.
The previous commits removed reviewables leading to a bad user
experience. This commit updates the status, replaces actions with a
message and greys out the reviewable.
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
Email change requests are never deleted no matter if they completed
successfully or not. The abandoned requests have the disadvantage of
showing up as unconfirmed emails in user's preferences page.
Recalculating a ReviewableFlaggedPost's score after rejecting or ignoring it sets the score as 0, which means that we can't find them after reviewing. They don't surpass the minimum priority threshold and are hidden.
Additionally, we only want to use agreed flags when calculating the different priority thresholds.
* FEATURE: add support for like webhooks
Add support for like webhooks. Webhook events only send on user membership
in the defined webhook group filters.
This also fixes group webhook events, as before this was never used, and
the logic was not correct.
This filter hides reviewables with a score lower than the "reviewable_low_priority_threshold" setting. We only use reviewables that already met this threshold to calculate the Medium and High priority filters.
It used to check if an upload record exists, which is wrong because an
invalid upload record exists even if the upload was not created.
The other improvement is a better log message.
Previously watched words ignored topic titles when applying auto tagging rules.
Also copy has been improved to reflect how the system behaves.
The text hints that we are only watching first post now
scopes are incredibly annoying to preload, simply adding :user_emails is not
enough.
Instead of relying on scopes simply iterate through user_emails which is
properly preloaded.
This removes 2 * N+1 when generating user reports.
When posts are moved from one topic to another, the `topic_user.bookmarked` column for all users in the new and the old topic needs to be resynced, for example because a user bookmarks post 12 in topic 1, then it is moved to topic 2, the topic_user record for topic 1 should no longer be bookmarked. A background job has been added to sync the column for a specified topic, or for no topic at all, which does it for all topics like the migration.
Also includes a migration that we have run in the past to fix bad data.
----
This has been addressed in other places in the past:
https://github.com/discourse/discourse/pull/10211https://github.com/discourse/discourse/pull/10188
When bulk inviting, the uploaded CSV file may contain wrong values for
the user fields. This tries to automatically correct them by finding
the most similar option (by ignoring the case).
Admins can use bulk invites to pre-populate user fields. The imported
CSV file must have a header with "email" column (first position) and
names of the user fields (exact match).
Under the hood, the bulk invite will create staged users and populate
the user fields of those.
The user mailing list mode continued to be silently enabled and
UserEmail job checked just that ignoring site setting
disable_mailing_list_mode.
An additional migrate was added to set disable_mailing_list_mode
to false if any users enabled the mailing list mode already.
Currently the process of adding a custom image to badge is quite clunky; you have to upload your image to a topic, and then copy the image URL and pasting it in a text field. Besides being clucky, if the topic or post that contains the image is deleted, the image will be garbage-collected in a few days and the badge will lose the image because the application is not that the image is referenced by a badge.
This commit improves that by adding a proper image uploader widget for badge images.
It was used both when inviting from a topic page and when creating
invites with "Send to topic on first login", while it should be used
only in the former case.
Onebox content may only be resolved during the process_post job. Onebox content could change the content of the excerpt, so we need to make sure the excerpt is updated accordingly.
The urls that we generate for mobile post notifications don't take into
account the subfolder url if a site happens to have one configured. When
this happens when you tap on a new mobile notification it takes you to
a url that doesn't work because it is missing the subfolder portion.
I honestly think this should be handled in the Post model like we do
with the Topic model. `Post.url` should know how to handle subfolder
installs, but that seemed like a very risky change because there are
lots of other places in the codebase where we tack on the base_path and
I didn't want to risk duplicating it.
I also found a small typo in the topics controller spec.
The user interface has been reorganized to show email and link invites
in the same screen. Staff has more control over creating and updating
invites. Bulk invite has also been improved with better explanations.
On the server side, many code paths for email and link invites have
been merged to avoid duplicated logic. The API returns better responses
with more appropriate HTTP status codes.
* FIX: Reduce the time_read threshold to one minute.
Five minutes is too much and could fill the queue with false positives.
* Update spec/jobs/enqueue_suspect_users_spec.rb
Co-authored-by: Arpit Jalan <arpit@techapj.com>
Co-authored-by: Arpit Jalan <arpit@techapj.com>
Completing the discobot tutorial gives you ~3m of reading time, so we set the limit at 5m. Additionally, we use an "OR" clause to cover the case when you just scroll through a single topic.
Original PR was reverted because of broken migration https://github.com/discourse/discourse/pull/12058
I fixed it by adding this line
```
AND topics.id IN(SELECT id FROM topics ORDER BY created_at DESC LIMIT :max_new_topics)
```
This time it is left joining a limited amount of topics. I tested it on few databases and it worked quite smooth
Follow up https://github.com/discourse/discourse/pull/11968
Dismiss all new topics using the same DismissTopicService. In addition, MessageBus receives exact topic ids which should be marked as `seen`.
The bug was mentioned on meta https://meta.discourse.org/t/users-are-seeing-handling-of-unhandled-tag-again/155367
It was related to users who are watching a specific topic. In that case, when the hidden tag was added or removed to the topic they were notified by `NotifyTagChangeJob`.
That job should take hidden tags into consideration. If all changed tags are in a hidden group, it should exclude user not belong to that group.
At the same time, if visible to anyone tag is added or removed users watching topic should be notified.
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
This PR allows entering a float value for topic timers e.g. 0.5 for 30 minutes when entering hours, 0.5 for 12 hours when entering days. This is achieved by adding a new column to store the duration of a topic timer in minutes instead of the ambiguous both hours and days that it could be before.
This PR has ommitted the post migration to delete the duration column in topic timers; it will be done in a subsequent PR to ensure that no data is lost if the UPDATE query to set duration_mintues fails.
I have to keep the old keyword of duration in set_or_create_topic_timer for backwards compat, will remove at a later date after plugins are updated.
This is a try to simplify logic around dismiss new topics to have one solution to work in all places - dismiss all-new, dismiss new in a specific category or even in a specific tag.
* FIX: In FastImage 2.2.2 an error is raised with a `nil` path
Sometimes Discourse.store.path_for would return `nil`, which the job
handled gracefully before, but raises an error with the new version of
the gem.
Note the logic of this job is a bit awkward since it depends on `nil`
being a string, but at least now it's no longer filling logs with
errors.
* Update app/jobs/onceoff/fix_invalid_gravatar_uploads.rb
Co-authored-by: Bianca Nenciu <nbianca@users.noreply.github.com>
Co-authored-by: Bianca Nenciu <nbianca@users.noreply.github.com>
This PR revamps the topic timer UI, using the time shortcut selector from the bookmark modal.
* Fixes an issue where the duration of hours/days after last reply or auto delete replies was not enforced to be > 0
* Fixed an issue where the timer dropdown options were not reloaded correctly if the topic status changes in the background (use `MessageBus` to publish topic state in the open/close timer jobs)
* Moved the duration input and the "based on last post" option from the `future-date-input` component, as it was only used for topic timers. Also moved out the notice that is displayed which was also only relevant for topic timers.
Alan Guo Xiang Tan
David Taylor
Peter Zhu
Martin Brennan
Roman Rizzi
Angus McLeod
Jarek Radosz
Sam
Mark VanLandingham
Dan Ungureanu
Bianca Nenciu
Arpit Jalan
Osama Sayegh
Vinoth Kannan
Krzysztof Kotlarek
Penar Musaraj
Joffrey JAFFEUX
Josh Soref
Jeff Wong
Gerhard Schlager
Blake Erickson
Rafael dos Santos Silva
Robin Ward
Régis Hanol