This commit adds the ability for site administrators to mark users'
passwords as expired. Note that this commit does not add any client side
interface to mark a user's password as expired.
The following changes are introduced in this commit:
1. Adds a `user_passwords` table and `UserPassword` model. While the
`user_passwords` table is currently used to only store expired
passwords, it will be used in the future to store a user's current
password as well.
2. Adds a `UserPasswordExpirer.expire_user_password` method which can
be used from the Rails console to mark a user's password as expired.
3. Updates `SessionsController#create` to check that the user's current
password has not been marked as expired after confirming the
password. If the password is determined to be expired based on the
existence of a `UserPassword` record with the `password_expired_at`
column set, we will not log the user in and will display a password
expired notice. A forgot password email is automatically send out to
the user as well.
This commit introduces the following changes:
1. Introduce the `SignalTrapLogger` singleton which starts a single
thread that polls a queue to log messages with the specified logger.
This thread is necessary becasue most loggers cannot be used inside
the `Signal.trap` context as they rely on mutexes which are not
allowed within the context.
2. Moves the monkey patch in `freedom_patches/unicorn_http_server_patch.rb` to
`config/unicorn.config.rb` which is already monkey patching
`Unicorn::HttpServer`.
3. `Unicorn::HttpServer` will now automatically send a `USR2` signal to
a unicorn worker 2 seconds before the worker is timed out by the
Unicorn master.
4. When a Unicorn worker receives a `USR2` signal, it will now log only
the main thread's backtraces to `Rails.logger`. Previously, it was
`put`ing the backtraces to `STDOUT` which most people wouldn't read.
Logging it via `Rails.logger` will make the backtraces easily
accessible via `/logs`.
This commit introduces the following changes which allows a site
administrator to mark `Upload` records with the `s3_file_missing`
verification status which will result in the `Upload` record being ignored when
`Discourse.store.list_missing_uploads` is ran on a site where S3 uploads
are enabled and `SiteSetting.enable_s3_inventory` is set to `true`.
1. Introduce `s3_file_missing` to `Upload.verification_statuses`
2. Introduce `Upload.mark_invalid_s3_uploads_as_missing` which updates
`Upload#verification_status` of all `Upload` records from `invalid_etag` to `s3_file_missing`.
3. Introduce `rake uploads:mark_invalid_s3_uploads_as_missing` Rake task
which allows a site administrator to change `Upload` records with
`invalid_etag` verification status to the `s3_file_missing`
verificaton_status.
4. Update `S3Inventory` to ignore `Upload` records with the
`s3_file_missing` verification status.
When uploading a video, the composer will now show a thumbnail image in
the composer preview instead of just the video placeholder image.
If `enable_diffhtml_preview` is enabled the video will be rendered in
the composer preview and is playable.
This commit updates all Sidekiq signal handling event logs to go through
Unicorn's logger instead of logging to STDOUT. Going through a proper logger
means the log messages are logged in the format which the logger has configured.
This means we get proper timestamp for the log messages.
Introduced back in 2022 in
e3d495850d,
our new more specific message-id format for inbound and
outbound emails has now been in use for a very long time,
we can remove the support for the old formats:
`topic/:topic_id/:post_id.:random@:host`
`topic/:topic_id@:host`
`topic/:topic_id.:random@:host`
In this PR service objects were moved to Core https://github.com/discourse/discourse/pull/26506
However, ServiceRunner should be moved as well. Mostly for CI to run effortlessly without loading plugins.
This commit moves the logic for crawler rate limits out of the application controller and into the request tracker middleware. The reason for this move is to apply rate limits to all crawler requests instead of just the requests that make it to the application controller. Some requests are served early from the middleware stack without reaching the Rails app for performance reasons (e.g. `AnonymousCache`) which results in crawlers getting 200 responses even though they've reached their limits and should be getting 429 responses.
Internal topic: t/128810.
This commit adds a `DISCOURSE_DUMP_BACKTRACES_ON_UNICORN_WORKER_TIMEOUT`
environment that will allow us to dump all backtraces for all threads of
a Unicorn worker 2 seconds before it times out. In development,
backtraces are dumped to `STDOUT` and in production we will dump it to
`unicorn.stdout.log`.
We want to dump all the backtraces to make it easier to identify the
cause of a Unicorn worker timing out.
This commit updates `S3Inventory#files` to ignore S3 inventory files
which have a `last_modified` timestamp which are not at least 2 days
older than `BackupMetadata.last_restore_date` timestamp.
This check was previously only in `Jobs::EnsureS3UploadsExistence` but
`S3Inventory` can also be used via Rake tasks so this protection needs
to be in `S3Inventory` and not in the scheduled job.
* DEV: allow reply_by_email, visit_link_to_respond strings to be modified by plugins
* DEV: separate visit_link_to_respond and reply_by_email modifiers out
This PR aims to add bulk actions to the user's bookmarks.
After this feature, all users should be able to select multiple bookmarks and perform the actions of "deleting" or "clear reminders"
This fixes the `PrettyText.make_all_links_absolute` to better handle subfolder.
In subfolder, when given the cooked version of a post, links to mentions includes the `Discourse.base_path` prefix. Adding the `Discourse.base_url` was doubling the `Discourse.base_path`.
The issue was hidden behind the specs which was stubbing `Discourse.base_url` instead of relying on `Discourse.base_path`.
This fixes both the "algorithm" used in `PrettyText.make_all_links_absolute` to better handle this case and correct the specs to properly handle subfolder cases.
There are lots of changes in the specs due to a refactoring to use squiggly heredoc strings for easier reading and less escaping.
This commit adds a step in our tests workflow on Github actions to update the themes to
use the compatible version when not running aginast the `main` branch.
This is to ensure that we are not running
the tests for themes against an incompatible version of Discourse.
AuthProvider#enabled_setting=, used primarily by plugins, has been deprecated since version 2.9, in favour of Authenticator#enabled?. This PR confirms we are seeing no more usage and removes the method.
Whenever one creates, updates, or deletes a post, we should keep the `topic.word_count` counter in sync.
Context - https://meta.discourse.org/t/-/308062
This commits updates `FinalDestination#get` to not forward
`Authorization` header on redirects since most HTTP clients I tested like
curl and wget does not it.
This also fixes a recent problem in `DiscourseIpInfo.mmdb_download`
where we will fail to download the databases when both `GlobalSetting.maxmind_account_id` and
`GlobalSetting.maxmind_license_key` has been set. The failure is due to
the bug above where the redirected URL given by MaxMind does not accept
an `Authorization` header.
This commit optimises the database query generated by
`TopicsFilter#filter_categories` when the `-category:*` filter is used.
Previously, the method will add the `topics.category_id NOT IN
(<category ids to be excluded>)` filter to the resulting query. However,
we noticed that the performance of the query degrades as the number of
rows in the `topics` table grow and when the number of category ids to be
excluded is large.
Sample of query we ran on a large database in production to demonstrate
the improvement:
Before:
```
SELECT topics.id FROM topics WHERE topics.category_id NOT IN (83, 136, 149, 143, 153, 165, 161, 123, 155, 163, 144, 134, 69, 135, 158, 141, 151, 160, 131, 133, 89, 104, 150, 147, 132, 145, 108, 146, 122, 100, 128, 154, 95, 102, 140, 139, 88, 91, 87) ORDER BY topics.id DESC LIMIT 5;
QUERY PLAN
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Limit (cost=27795.34..27795.34 rows=1 width=4) (actual time=29.317..30.165 rows=5 loops=1)
-> Sort (cost=27795.34..27795.34 rows=1 width=4) (actual time=29.316..30.163 rows=5 loops=1)
Sort Key: id DESC
Sort Method: top-N heapsort Memory: 25kB
-> Gather (cost=1000.10..27795.33 rows=1 width=4) (actual time=0.187..26.132 rows=73478 loops=1)
Workers Planned: 2
Workers Launched: 2
-> Parallel Seq Scan on topics (cost=0.10..26795.23 rows=1 width=4) (actual time=0.013..22.252 rows=24493 loops=3)
Filter: (category_id <> ALL ('{83,136,149,143,153,165,161,123,155,163,144,134,69,135,158,141,151,160,131,133,89,104,150,147,132,145,108,146,122,100,128,154,95,102,140,139,88,91,87}'::integer[]))
Rows Removed by Filter: 77276
Planning Time: 0.140 ms
Execution Time: 30.181 ms
```
After:
```
SELECT topics.id FROM topics WHERE NOT EXISTS (
SELECT 1
FROM unnest(array[83, 136, 149, 143, 153, 165, 161, 123, 155, 163, 144, 134, 69, 135, 158, 141, 151, 160, 131, 133, 89, 104, 150, 147, 132, 145, 108, 146, 122, 100, 128, 154, 95, 102, 140, 139, 88, 91, 87]) AS excluded_categories(category_id)
WHERE topics.category_id IS NULL OR excluded_categories.category_id = topics.category_id
) ORDER BY topics.id DESC LIMIT 5 ;
QUERY PLAN
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Limit (cost=0.42..13.52 rows=5 width=4) (actual time=0.028..0.110 rows=5 loops=1)
-> Nested Loop Anti Join (cost=0.42..179929.62 rows=68715 width=4) (actual time=0.027..0.109 rows=5 loops=1)
Join Filter: ((topics.category_id IS NULL) OR (excluded_categories.category_id = topics.category_id))
Rows Removed by Join Filter: 239
-> Index Scan Backward using forum_threads_pkey on topics (cost=0.42..108925.71 rows=305301 width=8) (actual time=0.012..0.062 rows=44 loops=1)
-> Function Scan on unnest excluded_categories (cost=0.00..0.39 rows=39 width=4) (actual time=0.000..0.001 rows=6 loops=44)
Planning Time: 0.126 ms
Execution Time: 0.124 ms
(8 rows)
```
This commit changes request method for "categories/search" from GET to
POST to make sure that long filters can be passed to the server. For
example, category selectors with many categories are setting the full
list of selected category IDs to ensure these are filtered out from the
list of choices. This can result in a long URL that exceeds the maximum
length.
This reverts commit 0f4520867b.
This has led to two problems:
1. An incompatibility with Cloudflare's "auto minify" feature. They've deprecated this feature because of incompatibility with modern JS syntax. But unfortunately it will remain enabled on existing properties until 2024-08-05.
2. Discourse fails to boot in Safari 15. This is strange, because Safari does support all the required features in our production JS bundles. Even more strangely, things start working as soon as you open the developer tools. That suggests the cause could be a Safari bug rather than a simple incompatibility.
Reverting while we work out a path forward on both those issues.
This commit switches `DiscourseIpInfo.mmdb_download` to use the
permalinks supplied by MaxMind to download the MaxMind databases as
specified in
https://dev.maxmind.com/geoip/updating-databases#directly-downloading-databases
which states:
```
To directly download databases, follow these steps:
1. In the "Download Links" column, click "Get Permalink(s)" for the desired database.
2. Copy the permalink(s) provided in the modal window.
3. Provide your account ID and your license key using Basic Authentication to authenticate.
```
Previously we are downloading from `https://download.maxmind.com/app/geoip_download` but this is not
documented anyway on MaxMind's docs so this URL can in theory break
in the future without warning. Therefore, we are taking a proactive
approach to download the databases from MaxMind the recommended way
instead of relying on a hidden URL. This old way of downloading the
databases with only a license key will be deprecated in 3.3 and be
removed in 3.4.
In 95a82d608d, we lowered the default for
`Onebox.options.max_download_kb` from 10mb to 2mb for security hardening
purposes. However, this resulted in multiple bug reports where seemingly
nomral URLs stopped being oneboxed. It turns out that lowering
`Onebox.options.max_download_kb` resulted in `Onebox::Helpers::DownloadTooLarge` being raised
more often for more URLs in `Onebox::Helpers.fetch_response` which
`Onebox::Helpers.fetch_html_doc` relies on. When
`Onebox::Helpers::DownloadTooLarge` is raised in
`Onebox::Helpers.fetch_response`, we throw away whatever response body
which we have already downloaded at that point. This is not ideal
because Nokogiri can parse incomplete HTML documents and there is a
really high chance that the incomplete HTML document still contains the
information which we need for oneboxing.
Therefore, this commit updates `Onebox::Helpers.fetch_html_doc` to not
throw away the response body when the size of the response body exceeds
`Onebox.options.max_download_size`. Instead, we just take whatever
response which we have and get Nokogiri to parse it.
This can happen for various reasons including rate limiting and middleware bugs. This should resolve the warning we're seeing in the logs
```
RequestTracker.get_data failed : NoMethodError : undefined method `[]' for nil:NilClass
```
decorator-transforms (https://github.com/ef4/decorator-transforms) is a modern replacement for babel's plugin-proposal-decorators. It provides a decorator implementation using modern browser features, without needing to enable babel's full suite of class feature transformations. This improves the developer experience and performance.
In local testing with Google's 'tachometer' tool, this reduces Discourse's 'init-to-render' time by around 3-4% (230ms -> 222ms).
It reduces our initial gzip'd JS payloads by 3.2% (2.43MB -> 2.35MB), or 7.5% (14.5MB -> 13.4MB) uncompressed.
This keeps coming up in user testing as something
we want to get rid of. The `navigation_menu` setting
has been set to sidebar by default for some time now,
and we are rolling out admin sidebar widely. It just
doesn't make sense to let people turn this off in
the first step of the wizard -- we _want_ people to
use the sidebar.
Whenever a post already failed "lightweight" validations, we skip all the expensive validations (that cooks the post or run SQL queries) so that we reply as soon as possible.
Also skip validating polls when there's no "[/poll]" in the raw.
Internal ref - t/115890
When running `rake uploads:regenerate_missing_optimized`,
a `Discourse::InvalidAccess` will be raised if an SVG
file is being processed as `OptimizedImage.prepend_decoder!`
doesn't support the svg extension. This commit simply copies
the original SVG file as the thumbnail, just like currently
`OptimizedImage.create_for` does.
Ignored columns can only be dropped when its associated post-deploy
migration has been promoted to a regular migration. This is so because
Discourse doesn't rely on a schema file system to setup a brand new
database and thus the column information will be loaded by the
application first before the post-deploy migration runs.
- Use 'cheap-source-map' webpack config on low-memory machines
This results in worse quality sourcemaps in browser dev tools, but it significantly reduces memory use in our webpack build. In approximate local testing it drops from 1100mb to 590mb. This should make the rebuild process on low-memory machines much faster and less likely to trigger OOM errors.
In development, and on higher-memory machines, the higher-quality 'source-map' option is maintained.
- Disable Webpack's built-in `minimize` feature. Embroider already applies Terser after the webpack build is complete. There is no need to double-minimize the output.
- Update ember-cli-progress-ci to print to stderr instead of stdout. For some reason, pups (used by discourse_docker) buffers the stdout of commands and only prints when they are finished. stderr does not have this same limitation, so switching will mean sysadmins can see the progress of the ember build in real-time.
Given the number of variables it's hard to promise exact numbers. But, in my tests on a DO droplet with 1GB RAM (+2GB swap), this reduced the `ember build` portion of a `./launcher rebuild app` from ~50 minutes to ~15 minutes.
This commit adds a `isValidUrl` helper function to the context in
which theme migrations are ran in. This helper function is to make it
easier for theme developers to check if a string is a valid URL or path
when writing theme migrations. This can be helpful in cases when
migrating a string based setting to `type: objects` which contain `type:
string` properties with URL validations enabled.
This commit also introduces the `UrlHelper.is_valid_url?` method
which actually checks that the URL string is of the valid format instead of
only checking if the URL string is parseable which is what `UrlHelper.relaxed_parse` does
and is not sufficient for our needs.
This is a follow up of 5fcb7c262d
It was missing the case where secure uploads is enabled, which creates a copy of the upload no matter what.
So this checks for the original_sha1 of the uploads as well when checking for duplicates.
This commit introduces a few changes as a result of
customer issues with finding why a topic was relisted.
In one case, if a user edited the OP of a topic that was
unlisted and hidden because of too many flags, the topic
would get relisted by directly changing topic.visible,
instead of going via TopicStatusUpdater.
To improve tracking we:
* Introduce a visibility_reason_id to topic which functions
in a similar way to hidden_reason_id on post, this column is
set from the various places we change topic visibility
* Fix Post#unhide! which was directly modifying topic.visible,
instead we use TopicStatusUpdater which sets visibility_reason_id
and also makes a small action post
* Show the reason topic visibility changed when hovering the
unlisted icon in topic status on topic titles
This commit fixes a bug in theme settings migrations where values of `objects` typed theme settings aren't passed to migrations even when there are overriding values for those settings. What causes this bug is that, when creating the hash that contains all the overridden settings and will be passed to migrations, the values of `objects` typed settings are incorrectly retrieved from the `value` column (which is always nil for `objects` type) instead of `json_value`. `objects` settings are different from all other types in that they store their values in the `json_value` column and they need to be special-cased when retrieving their values.
Our 'page_view_crawler' / 'page_view_anon' metrics are based purely on the User Agent sent by clients. This means that 'badly behaved' bots which are imitating real user agents are counted towards 'anon' page views.
This commit introduces a new method of tracking visitors. When an initial HTML request is made, we assume it is a 'non-browser' request (i.e. a bot). Then, once the JS application has booted, we notify the server to count it as a 'browser' request. This reliance on a JavaScript-capable browser matches up more closely to dedicated analytics systems like Google Analytics.
Existing data collection and graphs are unchanged. Data collected via the new technique is available in a new 'experimental' report.
This commit fixes a bug in the `themes:update` rake task which resulted
in the ActiveRecord transaction not being rolled back when an error was
encountered. The transaction was first introduced in
7f0682f4f2 which changed a `begin..rescue`
block to `transaction do..rescue`. The problem with that change
prevented the transaction from ever rolling back as the code block
looks something like this:
```
transaction do
begin
update_theme
rescue => e
# surpress error
end
end
```
From the transaction's point of view now, it will never rollback even if
an error was encountered when updating the remote theme because it will
never see the error.
Instead we should have done something like this if we wanted to surpress
the errors encountered while still ensuring that the transaction is
rolled back.
```
begin
transaction do
update_theme
end
rescue => e
# surpress error
end
```
This is essential for us to determine which site is encountering an
error while updating remote themes. We are also including the theme's id
because themes can have the same name.
This service-worker caching functionality was disabled by default in 1c58395bca, and the setting to re-enable was marked as experimental. Now we are dropping all the related logic.
- Run the CSP-nonce-related middlewares on the generated response
- Fix the readonly mode checking to avoid empty strings being passed (the `check_readonly_mode` before_action will not execute in the case of these re-dispatched exceptions)
- Move the BlockRequestsMiddleware cookie-setting to the middleware, so that it is included even for unusual HTML responses like these exceptions
LinkedIn has grandfathered its old OAuth2 provider. This can only be used by existing apps. New apps have to use the new OIDC provider.
This PR adds a linkedin_oidc provider to core. This will exist alongside the discourse-linkedin-auth plugin, which will be kept for those still using the deprecated provider.
For e-mails, secure uploads redacts all secure images, and later uses the access control post to re-attached allowed ones. We pass the ID of this post through the X-Discourse-Post-Id header. As the name suggests, this assumes there's only ever one access control post. This is not true for activity summary e-mails, as they summarize across posts.
This adds a new header, X-Discourse-Post-Ids, which is used the same way as the old header, but also works for the case where an e-mail is associated with multiple posts.
Automatically add `moderators` and `admins` auto groups to specific site settings.
In the new group-based permissions systems, we just want to check the user’s groups since it more accurately reflects reality
Affected settings:
- tag_topic_allowed_groups
- create_tag_allowed_groups
- send_email_messages_allowed_groups
- personal_message_enabled_groups
- here_mention_allowed_groups
- approve_unless_allowed_groups
- approve_new_topics_unless_allowed_groups
- skip_review_media_groups
- email_in_allowed_groups
- create_topic_allowed_groups
- edit_wiki_post_allowed_groups
- edit_post_allowed_groups
- self_wiki_allowed_groups
- flag_post_allowed_groups
- post_links_allowed_groups
- embedded_media_post_allowed_groups
- profile_background_allowed_groups
- user_card_background_allowed_groups
- invite_allowed_groups
- ignore_allowed_groups
- user_api_key_allowed_groups
This is to enable :array type attributes for Contract
attributes in services, this is a followup to the move
of services from chat to core here:
cab178a405
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
This SQL tries to insert as much data as possible into the `user_stats` table by either calculating or by approximating stats based on existing. It also fixes an error in the calculation of `reply_count`which mistakenly contained all posts, not just replies.
This change also disables some steps in the `import:ensure_consistency` rake task by setting the `SKIP_USER_STATS` env variable. Otherwise, the rake task will overwrite the calculated data in the `user_stats` table with inaccurate data. I'm not changing or removing the logic from the rake task yet because other bulk import scripts seem to depend on it.
This modifier allows plugins to alter the outcome of
`should_secure_uploads?` on a Post record, for cases when
plugins need post-attached uploads to always be secure (or
not secure) in specific scenarios.
This commit changes enum typed theme objects property to be optional.
Previously, an enum typed property is always required but we have found
that this might not be ideal so we want to change it.
This method name is a bit confusing; with_secure_uploads implies
it may return a block or something with the uploads of the post,
and has_secure_uploads implies that it's checking whether the post
is linked to any secure uploads.
should_secure_uploads? communicates the true intent of this method --
which is to say whether uploads attached to this post should be
secure or not.
This commit changes `DiscourseIpInfo.mmdb_download` to use `File.join`
instead of `URI.join` when `GlobalSetting.maxmind_mirror_url` has been
configured. This is necessary because `URI.join` does not work the way I
expect it to work when I implemented it previously.
`URI.join("http://www.example.com/mirror", "test.tar.gz") results in
`http://www.example.com/test.tar.gz` instead of our expected
`http://www.exmaple.com/mirror/test.tar.gz`. For our simple use case
here, `File.join` is sufficient.
We will be collecting the logo URL and the site's default locale values along with existing basic details to display the site on the Discourse Discover listing page. It will be included only if the site is opted-in by enabling the "`include_in_discourse_discover`" site setting.
Also, we no longer going to use `about.json` and `site/statistics.json` endpoints retrieve these data. We will be using only the `site/basic-info.json` endpoint.
Doesn't actually seem to be used by any of our formatters, but let's send the proper data anyway for future-proofing. Followup to ff6cb1bc05 and 8098876bfa
When a user is manually deactivated, they should not be deleted by our background job that purges inactive users.
In addition, site settings keywords should accept an array of keywords.
In this PR, all references in the UI to the word "`upgrade`" are changed to "`update`". This is to differentiate the update process in self-hosted sites from the plan "upgrade" process in hosted sites.
Follow-up to the PR: https://github.com/discourse/docker_manager/pull/208
Why this change?
This allows downloading the MaxMind databases from a mirror in cases
where downloading directly from MaxMind's API endpoint is problematic
due to API limits.
Why this change?
We currently support `GlobalSetting.refresh_maxmind_db_during_precompile_days` which
should cache the maxmind databases on disk for the configured number of
days before it downloads the databases from maxmind again via the API.
This was previously added to help us avoid hitting the API rate limit from maxmind.
However, there was a bug in the `copy_maxmind` when we copied the latest
downloaded database to the cache directory. In particular, `FileUtils.cp` was called with
`preserve: true` which would preserve the modified time of the file
being copied. This is problematic because download the database from
maxmind on 2 April 2024 can give us a file with an mtime of 29 March
2024. If `GlobalSetting.refresh_maxmind_db_during_precompile_days` is
set to `2` for example, the cache will never be used since we will
think that the file has been downloaded for more than 2 days in our
checks.
What is the fix here?
While we want to preserve the owner and group of the file, we do not
want to preserve the modified time and hence we will call
`FileUtils.touch` when copying the file.
Why this change?
For a schema like this:
```
schema = {
name: "section",
properties: {
category_property: {
type: "categories",
required: true,
},
},
}
```
When the value of the property is set to an empty array, we are not
raising an error which we should because the property is marked as
required.
Why this change?
This is a follow-up to 86b2e3a.
Basically, we want to allow people to select more than 1 group as well.
What does this change do?
1. Change `type: group` to `type: groups` and support `min` and `max`
validations for `type: groups`.
2. Fix the `<SchemaThemeSetting::Types::Groups>` component to support the
`min` and `max` validations and switch it to use the `<GroupChooser>` component
instead of the `<ComboBoxComponent>` component which previously only supported
selecting a single group.
Previously the problem check registry simply looked at the subclasses of ProblemCheck. This was causing some confusion in environments where eager loading is not enabled, as the registry would appear empty as a result of the classes never being referenced (and thus never loaded.)
This PR changes the approach to a more explicit one. I followed other implementations (bookmarkable and hashtag autocomplete.) As a bonus, this now has a neat plugin entry point as well.
Mark VanLandingham
Alan Guo Xiang Tan
Blake Erickson
Krzysztof Kotlarek
Martin Brennan
Loïc Guitaut
Osama Sayegh
Juan David Martínez Cubillos
Discourse Translator Bot
Gerhard Schlager
Ted Johansson
Penar Musaraj
Jan Cernik
marstall
Amanda Alves Branquinho
Régis Hanol
Jan Cernik
dsims
Bianca Nenciu
David Taylor
misaka4e21
Daniel Waterworth
Michael Brown
Jarek Radosz
Rafael dos Santos Silva
Vinoth Kannan
carehabit
Angus McLeod