Commit Graph

29 Commits

Author SHA1 Message Date
Dan Ungureanu fa8cd629f1
DEV: Hash tokens stored from email_tokens (#14493)
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.

To sum up, this commit:

* Adds token_hash and scope to email_tokens

* Reuses code that schedules critical_user_email

* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods

* Periodically cleans old, unconfirmed or expired email tokens
2021-11-25 09:34:39 +02:00
Andrei Prigorshnev 075cd07a07
No need to disable rate limiter after running tests (#13093)
We disable rate limiter before running every test here 90ab3b1c75/spec/rails_helper.rb (L109-L109)
2021-05-19 16:04:35 +04:00
Martin Brennan e58f9f7a55
DEV: Move logic for rate limiting user second factor to one place (#11941)
This moves all the rate limiting for user second factor (based on `params[:second_factor_token]` existing) to the one place, which rate limits by IP and also by username if a user is found.
2021-02-04 09:03:30 +10:00
Martin Brennan 8d3f803b3f
FIX: Make sure login required skipped for confirm new email routes (#11748)
As per @davidtaylorhq 's comment at 6e2be3e#r46069906, this fixes an oversight where if login_required is enabled and an anon user follows a confirm new email link they are forced to login, which is not what the intent of #10830 was.
2021-01-20 10:52:25 +10:00
Martin Brennan 6e2be3e60b
FIX: When admin changes an email for the user the user must confirm the change (#10830)
See https://meta.discourse.org/t/changing-a-users-email/164512 for additional context.

Previously when an admin user changed a user's email we assumed that they would need a password reset too because they likely did not have access to their account. This proved to be incorrect, as there are other reasons a user needs admin to change their email. This PR:

* Changes the admin change email for user flow so the user is sent an email to confirm the change
* We now record who the email change request was requested by
* If the requested by user is admin and not the user we note this in the email sent to the user
* We also make the confirm change email route open to anonymous users, so it can be clicked by the user even if they do not have access to their account. If there is a logged in user we make sure the confirmation matches the current user.
2020-10-07 13:02:24 +10:00
Krzysztof Kotlarek e0d9232259
FIX: use allowlist and blocklist terminology (#10209)
This is a PR of the renaming whitelist to allowlist and blacklist to the blocklist.
2020-07-27 10:23:54 +10:00
Vinoth Kannan 3252cb847c FIX: : trigger `user_updated` event only if email changed after user creation.
Follow-up to 1460d7957c
2020-07-16 18:21:30 +05:30
Vinoth Kannan 1460d7957c FEATURE: trigger `user_updated` event if email changed.
It will trigger `user_updated` Discourse event if a user_email record is created or updated or destroyed.
2020-07-16 14:20:41 +05:30
Dan Ungureanu 79ab1493c8
DEV: Add test (#10066)
Follow-up-to f1b97202d4
2020-06-17 21:41:29 +03:00
Dan Ungureanu 5bfe1ee4f1
FEATURE: Improve UX support for multiple email addresses (#9691) 2020-06-10 19:11:49 +03:00
Guo Xiang Tan 062db10c52
FIX: `EmailValidator` needs to validate format of email. 2020-06-03 10:34:37 +08:00
Martin Brennan 97d8f19387
FIX: When admin changes another user's email auto-confirm the change (#9001)
When admin changes a user's email from the preferences page of that user:

* The user will not be sent an email to confirm that their
  email is changing. They will be sent a reset password email
  so they can set the password for their account at the new
  email address.
* The user will still be sent an email to their old email to inform
  them that it was changed.
* Admin and staff users still need to follow the same old + new
  confirm process, as do users changing their own email.
2020-02-20 09:52:21 +10:00
Martin Brennan 66f2db4ea4 SECURITY: 2FA with U2F / TOTP 2020-01-15 11:27:12 +01:00
Martin Brennan beb91e7eff
FIX: require: false for rotp gem (#8540)
The ROTP gem is only used in a very small amount of places in the app, we don't need to globally require it.

Also set the Addressable gem to not have a specific version range, as it has not been a problem yet.

Some slight refactoring of UserSecondFactor here too to use SecondFactorManager to avoid code repetition
2019-12-17 10:33:51 +10:00
Sam Saffron b57e108e84 FEATURE: improve email change workflow
- Show old and new email address during the process
- Ensure correct user is logged on when attempting to make email changes
- Support reloading a page during the email reset process without resubmit
of form
- Improve tests
- Fixed issue where redirect back to site was not linking correctly in
subfolder setups

Internal refactor of single action into 4 distinct actions that are simpler
to reason about.

This also removes the step that logs on an account after you confirm an
email change, since it is no longer needed which leaves us with safer
internals.

This left me no choice but to amend translations cause the old route was
removed.
2019-11-21 16:28:35 +11:00
Blake Erickson 3b16eb7abb FIX: Confirm new email with backup codes enabled
This is a fix for this bug:

https://meta.discourse.org/t/-/133185?u=blake

where rails would throw a missing template error when trying to confirm
a new email address when you had two factor backup codes enabled.

Apparently this feature broke during this commit:

68d35b14f4

when a partial that contained a lot of javascript was removed most
likely because it didn't comply with our Content Security Policy, so as
a fix I rewrote the previous js functionality without using any
javascript and then added a spec to verify that the correct backup code
form is displayed when that page is loaded.
2019-11-14 16:27:42 -07:00
Daniel Waterworth e219588142 DEV: Prefabrication (test optimization) (#7414)
* Introduced fab!, a helper that creates database state for a group

It's almost identical to let_it_be, except:

 1. It creates a new object for each test by default,
 2. You can disable it using PREFABRICATION=0
2019-05-07 13:12:20 +10:00
Sam Saffron 4ea21fa2d0 DEV: use #frozen_string_literal: true on all spec
This change both speeds up specs (less strings to allocate) and helps catch
cases where methods in Discourse are mutating inputs.

Overall we will be migrating everything to use #frozen_string_literal: true
it will take a while, but this is the first and safest move in this direction
2019-04-30 10:27:42 +10:00
Sam 2d96160192 FEATURE: improve API error reporting for invalid records 2018-08-21 11:54:34 +10:00
Maja Komel ec3e6a81a4 FEATURE: Second factor backup 2018-06-28 10:12:32 +02:00
Guo Xiang Tan 3a8f69c3d2 DEV: Assert for 200 response code to avoid changing magic helper in the future. 2018-06-07 16:11:09 +08:00
Sam 89ad2b5900 DEV: Rails 5.2 upgrade and global gem upgrade
This updates tests to use latest rails 5 practice
and updates ALL dependencies that could be updated

Performance testing shows that performance has not regressed
if anything it is marginally faster now.
2018-06-07 14:21:33 +10:00
Gerhard Schlager 52db0b31c1 FIX: Automatically add user to groups after updating email address 2018-05-08 21:27:22 +02:00
Guo Xiang Tan 14f3594f9f Review Changes for f4f8a293e7. 2018-02-21 14:55:49 +08:00
Jeff Wong f4f8a293e7 FEATURE: Implement 2factor login TOTP
implemented review items.

Blocking previous codes - valid 2-factor auth tokens can only be authenticated once/30 seconds.
I played with updating the “last used” any time the token was attempted but that seemed to be overkill, and frustrating as to why a token would fail.
Translatable texts.
Move second factor logic to a helper class.
Move second factor specific controller endpoints to its own controller.
Move serialization logic for 2-factor details in admin user views.
Add a login ember component for de-duplication
Fix up code formatting
Change verbiage of google authenticator

add controller tests:
second factor controller tests
change email tests
change password tests
admin login tests

add qunit tests - password reset, preferences

fix: check for 2factor on change email controller
fix: email controller - only show second factor errors on attempt
fix: check against 'true' to enable second factor.

Add modal for explaining what 2fa with links to Google Authenticator/FreeOTP

add two factor to email signin link

rate limit if second factor token present

add rate limiter test for second factor attempts
2018-02-21 09:04:07 +08:00
Sam 49ed382c2a FIX: return 429 when admin api key is limited on admin route
This also handles a general case where exceptions leak out prior to being handled by the application controller
2018-01-12 14:15:26 +11:00
Arpit Jalan 9586f0bdc9 fix the build - take 2 2017-10-20 21:34:56 +05:30
Neil Lalonde c29334cf23 FEATURE: the hide_email_address_taken setting works with the change email address form in user preferences 2017-10-04 11:41:25 -04:00
Guo Xiang Tan 77d4c4d8dc Fix all the errors to get our tests green on Rails 5.1. 2017-09-25 13:48:58 +08:00