This commit makes sure that the email log's bounce_error_code
conforms to the SMTP error code RFC on save, so that
it is always in the format X.X.X or XXX without any
additional string details. Also included is a migration
to fix this issue for past records.
We added this constraint in 5bd55acf83
but it is causing problems in hosted sites and is catching the
issue too far down the line. This commit removes the constraint
for now, and also fixes an issue found with PostDestroyer
which wasn't using the UserStatCountUpdater when updating post_count
and thus was causing negative numbers to occur.
Whenever we got a bounced email in the Email::Receiver we
previously would just set bounced: true on the EmailLog and
discard the status/diagnostic code. This commit changes this
flow to store the bounce error code (defined in the RFC at
https://www.iana.org/assignments/smtp-enhanced-status-codes/smtp-enhanced-status-codes.xhtml)
not just in the Email::Receiver, but also via webhook events
from other mail services and from SNS.
This commit does not surface the bounce error in the UI,
we can do that later if necessary.
Follow up to 88a8584348. Sets
the baked version of all posts with custom emoji and a secure
media URL in the cooked content to 0. Then our periodic rebake
posts job will rebake them to apply the fix in the linked
commit. This only matters on sites with secure media enabled.
* FEATURE: Add external_id to topics
This commit allows for topics to be created and fetched by an
external_id. These changes are API only for now as there aren't any
front changes.
* add annotations
* add external_id to this spec
* Several PR feedback changes
- Add guardian to find topic
- 403 is returned for not found as well now
- add `include_external_id?`
- external_id is now case insensitive
- added test for posts_controller
- added test for topic creator
- created constant for max length
- check that it redirects to the correct path
- restrain external id in routes file
* remove puts
* fix tests
* only check for external_id in webhook if exists
* Update index to exclude external_id if null
* annotate
* Update app/controllers/topics_controller.rb
We need to check whether the topic is present first before passing it to the guardian.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* Apply suggestions from code review
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This commit allows group SMTP emails to be sent with a
different from email address that has been set up as an
alias in the email provider. Emails from the alias will
be grouped correctly using Message-IDs in the mail client,
and replies to the alias go into the correct group inbox.
Ensures that `UserStat#post_count` and `UserStat#topic_count` does not
go below 0. When it does like it did now, we tend to have bugs in our
code since we're usually coding with the assumption that the count isn't
negative.
In order to support the constraints, our post and topic fabricators in
tests will now automatically increment the count for the respective
user's `UserStat` as well. We have to do this because our fabricators
bypasss `PostCreator` which holds the responsibility of updating `UserStat#post_count` and
`UserStat#topic_count`.
* Chinese segmenetation will continue to rely on cppjieba
* Japanese segmentation will use our port of TinySegmenter
* Korean currently does not rely on segmentation which was dropped in c677877e4f
* SiteSetting.search_tokenize_chinese_japanese_korean has been split
into SiteSetting.search_tokenize_chinese and
SiteSetting.search_tokenize_japanese respectively
Non-staff users are not allowed to see whisper so this change prevents
non-staff user from seeing a like count that does not make sense to
them. In the future, we might consider adding another like count column
for staff user.
Follow-up to 4492718864
It is too close to release of 2.8 for incomplete
feature shenanigans. Ignores and drops the columns and drops
the trigger/function introduced in
e21c640a3c.
Will pick this feature back up post-release.
We are planning on attaching bookmarks to more and
more other models, so it makes sense to make a polymorphic
relationship to handle this. This commit adds the new
columns and backfills them in the bookmark table, and
makes sure that any new bookmark changes fill in the columns
via DB triggers.
This way we can gradually change the frontend and backend
to use these new columns, and eventually delete the
old post_id and for_topic columns in `bookmarks`.
The `fancy_title` column in the `topics` table currently has a constraint that limits the column to 400 characters. We need to remove that constraint because it causes some automatic topics/PMs from the system to fail when using Discourse in locales that need more than 400 characters to the translate the content of those automatic messages.
Internal ticket: t58030.
This commit removes the enable_experimental_backup_uploader site
setting and the flags in backups-index.hbs to make the uppy
backup uploader the main one from now on.
A follow-up commit will delete the old backup uploader code and
also remove resumable.js from the project.
We were checking for the existence of the column in any schema, including the `backup` schema. This can cause 'column does not exist' errors. In fact, we should only be checking in the `public` schema.
This column was dropped in a previous commit, in post migrations.
Unfortunatly that causes smoke tests to fail as there is a period between
migration and post migrations where records can not be inserted into the
table.
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
Old OnceOff job could perform pretty slowly on sites with millions of emails
New implementation operates in batches in a migration, minimizing locking.
Currently when a user creates posts that are moderated (for whatever
reason), a popup is displayed saying the post needs approval and the
total number of the user’s pending posts. But then this piece of
information is kind of lost and there is nowhere for the user to know
what are their pending posts or how many there are.
This patch solves this issue by adding a new “Pending” section to the
user’s activity page when there are some pending posts to display. When
there are none, then the “Pending” section isn’t displayed at all.
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.
To sum up, this commit:
* Adds token_hash and scope to email_tokens
* Reuses code that schedules critical_user_email
* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods
* Periodically cleans old, unconfirmed or expired email tokens
When this setting is turned on, it will check that normalized emails
are unique. Normalized emails are emails without any dots or plus
aliases.
This setting can be used to block use of aliases of the same email
address.
In b8c8909a9d, we introduced a regression
where users may have had their `UserStat.first_unread_pm_at` set
incorrectly. This commit introduces a migration to reset `UserStat.first_unread_pm_at` back to
`User#created_at`.
Follow-up to b8c8909a9d.
Instead of using image-uploader, which relies on the old
UploadMixin, we can now use the uppy-image-uploader which
uses the new UppyUploadMixin which is stable enough and
supports both regular XHR uploads and direct S3 uploads,
controlled by a site setting (default to XHR).
At some point it may make sense to rename uppy-image-uploader
back to image-uploader, once we have gone through plugins
etc. and given a bit of deprecation time period.
This commit also fixes `for_private_message`, `for_site_setting`,
and `pasted` flags not being sent via uppy uploads onto the
UploadCreator, both via regular XHR uploads and also through
external/multipart uploads.
The uploaders changed are:
* site setting images
* badge images
* category logo
* category background
* group flair
* profile background
* profile card background
It allows saving local date to calendar.
Modal is giving option to pick between ics and google. User choice can be remembered as a default for the next actions.
* DEV: Remove HTML setting type and sanitization logic.
We concluded that we don't want settings to contain HTML, so I'm removing the setting type and sanitization logic. Additionally, we no longer allow the global-notice text to contain HTML.
I searched for usages of this setting type in the `all-the-plugins` repo and found none, so I haven't added a migration for existing settings.
* Mark Global notices containing links as HTML Safe.
* PERF: Improve database query perf when loading topics for a category.
Instead of left joining the `topics` table against `categories` by filtering with `categories.id`,
we can improve the query plan by filtering against `topics.category_id`
first before joining which helps to reduce the number of rows in the
topics table that has to be joined against the other tables and also
make better use of our existing index.
The following is a before and after of the query plan for a category
with many subcategories.
Before:
```
QUERY PLAN
-------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
Limit (cost=1.28..747.09 rows=30 width=12) (actual time=85.502..2453.727 rows=30 loops=1)
-> Nested Loop Left Join (cost=1.28..566518.36 rows=22788 width=12) (actual time=85.501..2453.722 rows=30 loops=1)
Join Filter: (category_users.category_id = topics.category_id)
Filter: ((topics.category_id = 11) OR (COALESCE(category_users.notification_level, 1) <> 0) OR (tu.notification_level > 1))
-> Nested Loop Left Join (cost=1.00..566001.58 rows=22866 width=20) (actual time=85.494..2453.702 rows=30 loops=1)
Filter: ((COALESCE(tu.notification_level, 1) > 0) AND ((topics.category_id <> 11) OR (topics.pinned_at IS NULL) OR ((t
opics.pinned_at <= tu.cleared_pinned_at) AND (tu.cleared_pinned_at IS NOT NULL))))
Rows Removed by Filter: 1
-> Nested Loop (cost=0.57..528561.75 rows=68606 width=24) (actual time=85.472..2453.562 rows=31 loops=1)
Join Filter: ((topics.category_id = categories.id) AND ((categories.topic_id <> topics.id) OR (categories.id = 1
1)))
Rows Removed by Join Filter: 13938306
-> Index Scan using index_topics_on_bumped_at on topics (cost=0.42..100480.05 rows=715549 width=24) (actual ti
me=0.010..633.015 rows=464623 loops=1)
Filter: ((deleted_at IS NULL) AND ((archetype)::text <> 'private_message'::text))
Rows Removed by Filter: 105321
-> Materialize (cost=0.14..36.04 rows=30 width=8) (actual time=0.000..0.002 rows=30 loops=464623)
-> Index Scan using categories_pkey on categories (cost=0.14..35.89 rows=30 width=8) (actual time=0.006.
.0.040 rows=30 loops=1)
Index Cond: (id = ANY ('{11,53,57,55,54,56,112,94,107,115,116,117,97,95,102,103,101,105,99,114,106,1
13,104,98,100,96,108,109,110,111}'::integer[]))
-> Index Scan using index_topic_users_on_topic_id_and_user_id on topic_users tu (cost=0.43..0.53 rows=1 width=16) (a
ctual time=0.004..0.004 rows=0 loops=31)
Index Cond: ((topic_id = topics.id) AND (user_id = 1103877))
-> Materialize (cost=0.28..2.30 rows=1 width=8) (actual time=0.000..0.000 rows=0 loops=30)
-> Index Scan using index_category_users_on_user_id_and_last_seen_at on category_users (cost=0.28..2.29 rows=1 width
=8) (actual time=0.004..0.004 rows=0 loops=1)
Index Cond: (user_id = 1103877)
Planning Time: 1.359 ms
Execution Time: 2453.765 ms
(23 rows)
```
After:
```
QUERY PLAN
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Limit (cost=1.28..438.55 rows=30 width=12) (actual time=38.297..657.215 rows=30 loops=1)
-> Nested Loop Left Join (cost=1.28..195944.68 rows=13443 width=12) (actual time=38.296..657.211 rows=30 loops=1)
Filter: ((categories.topic_id <> topics.id) OR (topics.category_id = 11))
Rows Removed by Filter: 29
-> Nested Loop Left Join (cost=1.13..193462.59 rows=13443 width=16) (actual time=38.289..657.092 rows=59 loops=1)
Join Filter: (category_users.category_id = topics.category_id)
Filter: ((topics.category_id = 11) OR (COALESCE(category_users.notification_level, 1) <> 0) OR (tu.notification_level > 1))
-> Nested Loop Left Join (cost=0.85..193156.79 rows=13489 width=20) (actual time=38.282..657.059 rows=59 loops=1)
Filter: ((COALESCE(tu.notification_level, 1) > 0) AND ((topics.category_id <> 11) OR (topics.pinned_at IS NULL) OR ((topics.pinned_at <= tu.cleared_pinned_at) AND (tu.cleared_pinned_at IS NOT NULL))))
Rows Removed by Filter: 1
-> Index Scan using index_topics_on_bumped_at on topics (cost=0.42..134521.06 rows=40470 width=24) (actual time=38.267..656.850 rows=60 loops=1)
Filter: ((deleted_at IS NULL) AND ((archetype)::text <> 'private_message'::text) AND (category_id = ANY ('{11,53,57,55,54,56,112,94,107,115,116,117,97,95,102,103,101,105,99,114,106,113,104,98,100,96,108,109,110,111}'::integer[])))
Rows Removed by Filter: 569895
-> Index Scan using index_topic_users_on_topic_id_and_user_id on topic_users tu (cost=0.43..1.43 rows=1 width=16) (actual time=0.003..0.003 rows=0 loops=60)
Index Cond: ((topic_id = topics.id) AND (user_id = 1103877))
-> Materialize (cost=0.28..2.30 rows=1 width=8) (actual time=0.000..0.000 rows=0 loops=59)
-> Index Scan using index_category_users_on_user_id_and_last_seen_at on category_users (cost=0.28..2.29 rows=1 width=8) (actual time=0.004..0.004 rows=0 loops=1)
Index Cond: (user_id = 1103877)
-> Index Scan using categories_pkey on categories (cost=0.14..0.17 rows=1 width=8) (actual time=0.001..0.001 rows=1 loops=59)
Index Cond: (id = topics.category_id)
Planning Time: 1.633 ms
Execution Time: 657.255 ms
(22 rows)
```
* PERF: Optimize index on topics bumped_at.
Replace `index_topics_on_bumped_at` index with a partial index on `Topic#bumped_at` filtered by archetype since there is already another index that covers private topics.
We don't actually use the reminder_type for bookmarks anywhere;
we are just storing it. It has no bearing on the UI. It used
to be relevant with the at_desktop bookmark reminders (see
fa572d3a7a)
This commit marks the column as readonly, ignores it, and removes
the index, and it will be dropped in a later PR. Some plugins
are relying on reminder_type partially so some stubs have been
left in place to avoid errors.
This new column will be used to indicate that a bookmark
is at the topic level. The first post of a topic can be
bookmarked twice after this change -- with for_topic set
to true and with for_topic set to false.
A later PR will use this column for logic to bookmark the
topic, and then topic-level bookmark links will take you
to the last unread post in the topic.
See also 22208836c5
We don't need no stinkin' denormalization! This commit ignores
the topic_id column on bookmarks, to be deleted at a later date.
We don't really need this column and it's better to rely on the
post.topic_id as the canonical topic_id for bookmarks, then we
don't need to remember to update both columns if the bookmarked
post moves to another topic.
This is necessary to allow for large file uploads via
the direct S3 upload mechanism, as we convert the external
file to an Upload record via ExternalUploadManager once
it is complete.
This will allow for files larger than 2,147,483,647 bytes (2.14GB)
to be referenced in the uploads table.
This is a table locking migration, but since it is not as highly
trafficked as posts, topics, or users, the disruption should be minimal.
This pull request introduces the endpoints required, and the JavaScript functionality in the `ComposerUppyUpload` mixin, for direct S3 multipart uploads. There are four new endpoints in the uploads controller:
* `create-multipart.json` - Creates the multipart upload in S3 along with an `ExternalUploadStub` record, storing information about the file in the same way as `generate-presigned-put.json` does for regular direct S3 uploads
* `batch-presign-multipart-parts.json` - Takes a list of part numbers and the unique identifier for an `ExternalUploadStub` record, and generates the presigned URLs for those parts if the multipart upload still exists and if the user has permission to access that upload
* `complete-multipart.json` - Completes the multipart upload in S3. Needs the full list of part numbers and their associated ETags which are returned when the part is uploaded to the presigned URL above. Only works if the user has permission to access the associated `ExternalUploadStub` record and the multipart upload still exists.
After we confirm the upload is complete in S3, we go through the regular `UploadCreator` flow, the same as `complete-external-upload.json`, and promote the temporary upload S3 into a full `Upload` record, moving it to its final destination.
* `abort-multipart.json` - Aborts the multipart upload on S3 and destroys the `ExternalUploadStub` record if the user has permission to access that upload.
Also added are a few new columns to `ExternalUploadStub`:
* multipart - Whether or not this is a multipart upload
* external_upload_identifier - The "upload ID" for an S3 multipart upload
* filesize - The size of the file when the `create-multipart.json` or `generate-presigned-put.json` is called. This is used for validation.
When the user completes a direct S3 upload, either regular or multipart, we take the `filesize` that was captured when the `ExternalUploadStub` was first created and compare it with the final `Content-Length` size of the file where it is stored in S3. Then, if the two do not match, we throw an error, delete the file on S3, and ban the user from uploading files for N (default 5) minutes. This would only happen if the user uploads a different file than what they first specified, or in the case of multipart uploads uploaded larger chunks than needed. This is done to prevent abuse of S3 storage by bad actors.
Also included in this PR is an update to vendor/uppy.js. This has been built locally from the latest uppy source at d613b849a6. This must be done so that I can get my multipart upload changes into Discourse. When the Uppy team cuts a proper release, we can bump the package.json versions instead.
This adds a few different things to allow for direct S3 uploads using uppy. **These changes are still not the default.** There are hidden `enable_experimental_image_uploader` and `enable_direct_s3_uploads` settings that must be turned on for any of this code to be used, and even if they are turned on only the User Card Background for the user profile actually uses uppy-image-uploader.
A new `ExternalUploadStub` model and database table is introduced in this pull request. This is used to keep track of uploads that are uploaded to a temporary location in S3 with the direct to S3 code, and they are eventually deleted a) when the direct upload is completed and b) after a certain time period of not being used.
### Starting a direct S3 upload
When an S3 direct upload is initiated with uppy, we first request a presigned PUT URL from the new `generate-presigned-put` endpoint in `UploadsController`. This generates an S3 key in the `temp` folder inside the correct bucket path, along with any metadata from the clientside (e.g. the SHA1 checksum described below). This will also create an `ExternalUploadStub` and store the details of the temp object key and the file being uploaded.
Once the clientside has this URL, uppy will upload the file direct to S3 using the presigned URL. Once the upload is complete we go to the next stage.
### Completing a direct S3 upload
Once the upload to S3 is done we call the new `complete-external-upload` route with the unique identifier of the `ExternalUploadStub` created earlier. Only the user who made the stub can complete the external upload. One of two paths is followed via the `ExternalUploadManager`.
1. If the object in S3 is too large (currently 100mb defined by `ExternalUploadManager::DOWNLOAD_LIMIT`) we do not download and generate the SHA1 for that file. Instead we create the `Upload` record via `UploadCreator` and simply copy it to its final destination on S3 then delete the initial temp file. Several modifications to `UploadCreator` have been made to accommodate this.
2. If the object in S3 is small enough, we download it. When the temporary S3 file is downloaded, we compare the SHA1 checksum generated by the browser with the actual SHA1 checksum of the file generated by ruby. The browser SHA1 checksum is stored on the object in S3 with metadata, and is generated via the `UppyChecksum` plugin. Keep in mind that some browsers will not generate this due to compatibility or other issues.
We then follow the normal `UploadCreator` path with one exception. To cut down on having to re-upload the file again, if there are no changes (such as resizing etc) to the file in `UploadCreator` we follow the same copy + delete temp path that we do for files that are too large.
3. Finally we return the serialized upload record back to the client
There are several errors that could happen that are handled by `UploadsController` as well.
Also in this PR is some refactoring of `displayErrorForUpload` to handle both uppy and jquery file uploader errors.
This commit adds the number of drafts a user has next to the "Draft"
label in the user preferences menu and activity tab. The count is
updated via MessageBus when a draft is created or destroyed.
When configured, all topics in the category inherits the slow mode
duration from the category's default.
Note that currently there is no way to remove the slow mode from the
topics once it has been set.
Both of the commits in this PR are meant to fix the problem of invalid
option being shown in the flair chooser. An invalid option can be shown
if at some point it was a valid one - a group with a flair that was
later changed by an admin and flair was removed. The other option an
invalid option can be selected is if the user had a primary group when
the migration ran and copied the same value to the flair_group_id
column.
* FIX: Set flair_group_id only if group has flair
Follow up to 4ba93aac66.
* FIX: Do not show invalid option in flair chooser
If selected flair group became unavailable because the flair was removed
then the option would still be selected and visible as an ID only.
This is a follow up to commit 87c1e98571
which introduced different fields for primary and flair groups. Before
that, primary group was used as a flair group too.
User flair was given by user's primary group. This PR separates the
two, adds a new field to the user model for flair group ID and users
can select their flair from user preferences now.
Since disable_ddl_transaction! is disabled for this migration, it needs to be idempotent. Any error during the migration (e.g. a timeout) will cause ActiveRecord to fail the migration, and try again on the next run. If the index had already been created during the first run, then an 'already exists' error will be raised, with no way to recover.
Unfortunately an [ActiveRecord bug](https://github.com/rails/rails/pull/41490) prevents us from using `if_not_exists: true` alongside `algorithm: :concurrently`, so we have to drop to raw SQL.
The duration column has been ignored since the commit
4af77f1e38
for topic_timers, we use duration_minutes instead.
Also removing the duration key from Topic.set_or_create_timer. The only
plugin to use this was discourse-solved, which doesn't use it any
longer
since
c722b94a97
In the previous commit 5222247
we added a topic_id column to EmailLog. This simply backfills it in
batches. The next PR will get rid of the topic method defined on EmailLog in favour
of belongs_to.
* FEATURE: Staff can receive pending user reminders more frequently.
We now express the "pending_users_reminder_delay" in minutes instead of hours so staff can have finer control over the delay.
We need to keep in mind that the reminders could still take up to 20 minutes, even when using a lower value. We send them from a scheduled job.
* Migrate to a new site setting for the reminders delay
ATM it only implements server side of it, as my need is for automation purposes. However it should probably be added in the UI too as it's unexpected to have pinned_until and no bannered_until.
Having a large number of post-deploy migrations running out-of-numerical-sequence with pre-deploy migrations can be problematic. For example, if we have the sequence
- db/migrate/2017... - add column
- db/post_migrate/2018... - drop the column
- db/migrate/2021... - add the same column again
It will work fine in numerical order. But if you run the pre-deploy migrations **followed by** the post-deploy migrations, you will not get the same result.
Our post-deploy system is designed to allow for seamless upgrades of Discourse. However, it is reasonable for us to only support this totally seamless experience for a limited period of time. This commit moves all post_deploy migrations which are more than 1 year old (i.e. more than 2 major Discourse versions ago) into the regular pre-deploy migrations directory. This limits the impact of any edge cases caused by out-of-numerical-sequence migrations.
This adds the following columns to EmailLog:
* cc_addresses
* cc_user_ids
* topic_id
* raw
This is to bring the EmailLog table closer in parity to
IncomingEmail so it can be better utilized for Group SMTP
and IMAP mailing.
The raw column contains the full content of the outbound email,
but _only_ if the new hidden site setting
enable_raw_outbound_email_logging is enabled. Most sites do not
need it, and it's mostly required for IMAP and SMTP sending.
In the next pull request, there will be a migration to backfill
topic_id on the EmailLog table, at which point we can remove the
topic fallback method on EmailLog.
The first thing we needed here was an enum rather than a boolean to determine how a directory_column was created. Now we have `automatic`, `user_field` and `plugin` directory columns.
This plugin API is assuming that the plugin has added a migration to a column to the `directory_items` table.
This was created to be initially used by discourse-solved. PR with API usage - https://github.com/discourse/discourse-solved/pull/137/
Adds a new `smtp_group_id` column to `EmailLog` which is filled in if the mail `from_address` matches a group's `email_username`. This is for easier debugging, so we know which emails have been sent via group SMTP.
Over the years we have found that a few communities never discovered tags.
Instead of having them default off we now have them default on, ensuring
that everyone finds out about them.
Co-authored-by: Dan Ungureanu <dan@ungureanu.me>
Users who use encoded slugs on their sites sometimes run into 500 error when pasting a link to another topic in a post. The problem happens when generating a backward "reflection" link that would appear in a linked topic. Link URL restricted on the database level to 500 chars in length. At first glance, it should work since we have a restriction on topic title length.
But it doesn't work when a site uses encoded slugs, like here (take a look at the URL). The link to a topic, in this case, can be much longer than 500 characters.
By the way, an error happens only when generating a "reflection" link and doesn't happen with a direct link, we truncate that link. It works because, in this case, the original long link is still present in the post body and can be used for navigation. But we can't do the same for backward "reflection" links (without rewriting their implementation), the whole link must be saved to the database.
The simplest and cleanest solution will be just to remove the restriction on the database level. Abuse is impossible here since we are already protected by the restriction on topic title length. There aren’t performance benefits in using length-constrained columns in Postgres, in fact, length-constrained columns need a few extra CPU cycles to check the length when storing data.
It was not clear that replace watched words can be used to replace text
with URLs. This introduces a new watched word type that makes it easier
to understand.
Refactors `TrustLevel` and moves translations from server to client
Additional changes:
* "staff" and "admin" wasn't translatable in site settings
* it replaces a concatenated string with a translation
* uses translation for trust levels in users_by_trust_level report
* adds a DB migration to rename keys of translation overrides affected by this commit
The excerpt field in the database is constrained to 1000 chars in length. To support this constraint we added a restriction that the topic_excerpt_maxlength setting must be between 0 and 999.
Unfortunately, sometimes it doesn’t work because:
- topic_excerpt_maxlength restricts the length of a visible to user excerpt. But we HTML-escape text before saving. If an excerpt contains & it’ll be &. One character for the user but 5 characters to save to the database. So if topic_excerpt_maxlength is set to 999 it’s not so hard to have an excerpt of for example 1003 characters in length and run into this issue.
- It’s possible to define a custom excerpt for a topic. Such excerpts bypass check for a length. So if the user defines a too long custom excerpt he will run into this issue.
Removing the constraint on the database level solves the problem. But we still need the constraint for topic_excerpt_maxlength on the setting page, because too long excerpts would make UI wonky.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
Previously we would retry push notifications indefinitely for all errors
except for ExpiredSubscription
Under certain conditions other persistent errors may arise such as a persistent
rate limit.
If we track more than 3 errors in a period of time longer than a day we will
delete the subscription
Also performs a bit of internal cleanup to ensure protected methods really
are private.
Admins can visit an approved queued topic from the review queue by clicking their title. We no longer store the created post and topic ids in the reviewable's payload object. Instead, we set the `topic_id` and `target_id` attributes.
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
* FEATURE: add support for like webhooks
Add support for like webhooks. Webhook events only send on user membership
in the defined webhook group filters.
This also fixes group webhook events, as before this was never used, and
the logic was not correct.
When the admin creates a new custom field they can specify if that field should be searchable or not.
That setting is taken into consideration for quick search results.
When invited by email, users will receive an invite URL which contains
a token. If that token is present when the invite is redeemed, their
account will be automatically activated.
This PR adds a new category setting which is a column in the `categories` table, `allow_unlimited_owner_edits_on_first_post`.
What this does is:
* Inside the `can_edit_post?` method of `PostGuardian`, if the current user editing a post is the owner of the post, it is the first post, and the topic's category has `allow_unlimited_owner_edits_on_first_post`, then we bypass the check for `LimitedEdit#edit_time_limit_expired?` on that post.
* Also, similar to wiki topics, in `PostActionNotifier#after_create_post_revision` we send a notification to all users watching a topic when the OP is edited in a topic with the category setting `allow_unlimited_owner_edits_on_first_post` enabled.
This is useful for forums where there is a Marketplace or similar category, where topics are created and then updated indefinitely by the OP rather than the OP making new topics or additional replies. In a way this acts similar to a wiki that only one person can edit.
When posts are moved from one topic to another, the `topic_user.bookmarked` column for all users in the new and the old topic needs to be resynced, for example because a user bookmarks post 12 in topic 1, then it is moved to topic 2, the topic_user record for topic 1 should no longer be bookmarked. A background job has been added to sync the column for a specified topic, or for no topic at all, which does it for all topics like the migration.
Also includes a migration that we have run in the past to fix bad data.
----
This has been addressed in other places in the past:
https://github.com/discourse/discourse/pull/10211https://github.com/discourse/discourse/pull/10188
Because bookmarks have both topic and post ID, when the post was moved into another topic the bookmark was still attached to the post but did not show in the UI. This PR makes it so the all topic IDs for bookmarks attached to a post are updated when a post is moved.
Also included is a migration to fix affected records (e.g. on Meta there are 20 affected records).
See: https://meta.discourse.org/t/improved-bookmarks-with-reminders/144542/203
I was adding specs to ensure that post actions and uploads are removed for permanently deleted posts.
I noticed that post revisions were not permanently destroyed. I added a migration to fix old data.
In extreme circumstances when the uploads table is huge, the old version of
this migration could take a very long time.
The rewrite extracts the sha1 directly from the badges table and does an index
based match on the uploads table
Users can now pin bookmarks from their bookmark list. This will anchor the bookmark to the top of the list, and show a pin icon next to it. This also applies in the nav bookmarks panel. If there are multiple pinned bookmarks they sort by last updated order.
The user mailing list mode continued to be silently enabled and
UserEmail job checked just that ignoring site setting
disable_mailing_list_mode.
An additional migrate was added to set disable_mailing_list_mode
to false if any users enabled the mailing list mode already.
Currently the process of adding a custom image to badge is quite clunky; you have to upload your image to a topic, and then copy the image URL and pasting it in a text field. Besides being clucky, if the topic or post that contains the image is deleted, the image will be garbage-collected in a few days and the badge will lose the image because the application is not that the image is referenced by a badge.
This commit improves that by adding a proper image uploader widget for badge images.
Prior to this change, we had weights for very_high, high, low and
very_low. This means there were 4 weights to tweak and what weights to
use for `very_high/high` and `very_low/low` pair was hard to explain.
This change makes it such that `very_high` search priority will always
ensure that the posts are ranked at the top while `very_low` search
priority will ensure that the posts are ranked at the very bottom.
* FEATURE: Do not delete invite if link was copied
* FIX: Show error to user if invite redeeming fails
The error was only displayed to console.
* UX: Better placement of bulk buttons
Destroy all expired invites should be on the expired tab, not pending.
* FIX: Ensure invited_groups is unique per invite and group
* FIX: Do not refresh topic list if title unchanged
* FIX: Do not close modal on enter
This intereferes with the group and topic chooser.
Wrapping everything in a form disables this behavior.
* FIX: Move link and email options outside advanced section
* FIX: Do not close modal if saving a link invite
User may still want to copy the link.
- removes the option from site settings
- deletes the site setting on existing sites that have it
- marks posts using emojis as requiring a rebake
Note that the actual image files are not removed here, the plan is to
remove them in a few weeks/months (when presumably the rebaking of old
posts has been completed).
This commit includes other various improvements to watched words.
auto_silence_first_post_regex site setting was removed because it overlapped
with 'require approval' watched words.
* FIX: optimise MoveNewSinceToTable
Avoids shuffling all ids around to the app (only use min / max)
Ensure the query for boundaries is ordered by user_id
The bug was mentioned on meta: https://meta.discourse.org/t/pressing-dismiss-new-doesnt-clear-new-topics/179858
Problem is that sometimes the user has TopicUser records with `last_read_post_number` set as NULL. In that case, the topic is still "new" to them and should be dismissed when they click dismiss button.
In addition, I added that condition to post_migration and bumped the number to fix existing records. Migration is written to be idempotent so it will make no harm to already deployed instances.
Original PR was reverted because of broken migration https://github.com/discourse/discourse/pull/12058
I fixed it by adding this line
```
AND topics.id IN(SELECT id FROM topics ORDER BY created_at DESC LIMIT :max_new_topics)
```
This time it is left joining a limited amount of topics. I tested it on few databases and it worked quite smooth
This migration is quite heavy because of join to all potential topics which should be `dismissed` for each user. To make it a little bit more efficient I did two things:
- move conditions to join so it should use fewer rows
- do that in batches - 1000 users at the time
Follow up https://github.com/discourse/discourse/pull/11968
Dismiss all new topics using the same DismissTopicService. In addition, MessageBus receives exact topic ids which should be marked as `seen`.
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
Because of a where clause of duration_minutes != duration, where
duration_minutes was NULL, the previous migration to fill the new
duration_minutes column failed. This corrects the failed migration
by just running the update where duration_minutes is NULL and duration
IS NOT NULL.
Previous commit is 4af77f1
This PR allows entering a float value for topic timers e.g. 0.5 for 30 minutes when entering hours, 0.5 for 12 hours when entering days. This is achieved by adding a new column to store the duration of a topic timer in minutes instead of the ambiguous both hours and days that it could be before.
This PR has ommitted the post migration to delete the duration column in topic timers; it will be done in a subsequent PR to ensure that no data is lost if the UPDATE query to set duration_mintues fails.
I have to keep the old keyword of duration in set_or_create_topic_timer for backwards compat, will remove at a later date after plugins are updated.
This is a try to simplify logic around dismiss new topics to have one solution to work in all places - dismiss all-new, dismiss new in a specific category or even in a specific tag.
Adds a new column/setting to groups, allow_unknown_sender_topic_replies, which is default false. When enabled, this scenario is allowed via IMAP:
* OP sends an email to the support email address which is synced to a group inbox via IMAP, creating a group topic
* Group user replies to the group topic
* An email notification is sent to the OP of the topic via GroupSMTPMailer
* The OP has several email accounts and the reply is sent to all of them, or they forward their reply to another email account
* The OP replies from a different email address than the OP (gloria@gmail.com instead of gloria@hey.com for example)
* The a new staged user is created, the new reply is accepted and added to the topic, and the staged user is added to the topic allowed users
Without allow_unknown_sender_topic_replies enabled the new reply creates an entirely new topic (because the email address it is sent from is not previously part of the topic email chain).
This PR adds security_last_changed_at and security_last_changed_reason to uploads. This has been done to make it easier to track down why an upload's secure column has changed and when. This necessitated a refactor of the UploadSecurity class to provide reasons why the upload security would have changed.
As well as this, a source is now provided from the location which called for the upload's security status to be updated as they are several (e.g. post creator, topic security updater, rake tasks, manual change).
Run the 'MigrateSearchDataAfterDefaultLocaleRename' post migration in batches of 500k records.
This will hopefully prevent any potential deadlocks on large tables.
This adds a new table UserNotificationSchedules which stores monday-friday start and ends times that each user would like to receive notifications (with a Boolean enabled to remove the use of the schedule). There is then a background job that runs every day and creates do_not_disturb_timings for each user with an enabled notification schedule. The job schedules timings 2 days in advance. The job is designed so that it can be run at any point in time, and it will not create duplicate records.
When a users saves their notification schedule, the schedule processing service will run and schedule do_not_disturb_timings. If the user should be in DND due to their schedule, the user will immediately be put in DND (message bus publishes this state).
The UI for a user's notification schedule is in user -> preferences -> notifications. By default every day is 8am - 5pm when first enabled.
This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
This PR adds functionality for the IMAP sync code to detect if a UID that is missing from the mail group mailbox is in the Spam/Junk folder for the mail account, and if so delete the associated Discourse topic. This is identical to what we do for emails that are moved for Trash.
If an email is missing but not in Spam or Trash, then we mark the incoming email record with imap_missing: true. This may be used in future to further filter or identify these emails, and perhaps go hunting for them in the email account in bulk.
Note: This adds some code duplication because the trash and spam email detection and handling is very similar. I intend to do more refactors/improvements to the IMAP sync code in time because there is a lot of room for improvement.
These 2 indexes optimise performance on profile pages.
The summary page displays:
1. A list of "Top Link" - links sorted by number of clicks posted by user
2. A list of "Top Replies" - replies made by a user that go the most hearts
These two areas could devolve into full index or table scans, new indexes are there to avoid this cost on large dbs
One minor downside is that storage requirements go a tiny bit up to maintain the new indexes
There have been production instances where the migrations has run but the records
that were meant to be deleted have not been deleted. The root cause is
unknown but the migration is safe and simple to re-run. The problem is
not reproducible locally so we're not spending too much time on digging
up the root. Time vs business cost tradeoff.
Follow-up fb15da43da
This will only happen if the user_associated_accounts table is currently empty. It's useful for people that may be depending on primary key values in data explorer queries. This change will only have an effect on sites which have not already run this migration.
Themes marked for auto update will be automatically updated when
Discourse is updated. This is triggered by discourse_docker or
docker_manager running Rake task 'themes:update'.
* FIX: Store Reviewable's force_review as a boolean.
Using the `force_review` flag raises the score to hit the minimum visibility threshold. This strategy turned out to be ineffective on sites with a high number of flags, where these values could rapidly fluctuate.
This change adds a `force_review` column on the reviewables table and modifies the `Reviewable#list_for` method to show these items when passing the `status: :pending` option, even if the score is not high enough. ReviewableQueuedPosts and ReviewableUsers are always created using this option.
This commit adds an additional find_user_by_email hook to ManagedAuthenticator so that GitHub login can continue to support secondary email addresses
The github_user_infos table will be dropped in a follow-up commit.
This is the last core authenticator to be migrated to ManagedAuthenticator 🎉
- IgnoredUser records should all now have an expiring_at value. This commit enforces that in the DB, and fixes any corrupt rows
- Changes to the ignored user list are now handled by the `/u/{username}/notification_level` endpoint. This allows setting expiration dates on the ignore. This commit removes the old logic for saving a list of usernames in the user preferences.
- Many specs were calling `IgnoredUser.create`. This commit changes them to use `Fabricate(:ignored_user)` for consistency
This commit adds a site setting `auto_close_topics_create_linked_topic`
which when enabled works in conjunction with `auto_close_topics_post_count`
setting and creates a new linked topic for the topic just closed.
The auto-created new topic contains a link for all the previous topics
and the topic titles are appended with `(Part {n})`.
The setting is enabled by default.
Adds a new slow mode for topics that are heating up. Users will have to wait for a period of time before being able to post again.
We store this interval inside the topics table and track the last time a user posted using the last_posted_at datetime in the TopicUser relation.
Dependency on gifsicle, allow_animated_avatars and allow_animated_thumbnails
site settings were all removed. Animated GIF images are still allowed, but
the generated optimized images are no longer animated for those (which were
used for avatars and thumbnails).
The added 'animated' is populated by extracting information using FastImage.
This field was used to selectively reoptimize old animations. This process
happens in the background.
Now that we have support for user-selectable color schemes, it makes sense
to simplify seeding and theme updates in the wizard.
We now:
- seed only one theme, named "Default" (previously "Light")
- seed a user-selectable Dark color scheme
- rename the "Themes" wizard step to "Colors"
- update the default theme's color scheme if a default is set
(a new theme is created if there is no default)
This code is a no-op on all sites, even though it looks rather dangerous
this migration has long run prior to people trying exploit it.
That said ... hygiene here ... is not good.
Remove this legacy, we do not want it, even in historical migrations.
Previously, Jobs::EnqueueDigestEmails would enqueue a digest job for every user, even if there are no topics to send. The digest job would exit, no email would send, and last_emailed_at would not change. 30 minutes later, Jobs::EnqueueDigestEmails would run again and re-enqueue jobs for the same users.
120fa8ad introduced a temporary mitigation for this issue, by randomly selecting a subset of those users each time.
This commit adds a new `digest_attempted_at` column to the `user_stats` table. This column is updated every time a digest job completes for a user. Using this, we can avoid scheduling digest jobs for the same user every 30 minutes. This also removes the random user selection in 120fa8ad, and instead prioritizes users who had digests attempted the longest time ago.
See https://meta.discourse.org/t/changing-a-users-email/164512 for additional context.
Previously when an admin user changed a user's email we assumed that they would need a password reset too because they likely did not have access to their account. This proved to be incorrect, as there are other reasons a user needs admin to change their email. This PR:
* Changes the admin change email for user flow so the user is sent an email to confirm the change
* We now record who the email change request was requested by
* If the requested by user is admin and not the user we note this in the email sent to the user
* We also make the confirm change email route open to anonymous users, so it can be clicked by the user even if they do not have access to their account. If there is a logged in user we make sure the confirmation matches the current user.
The reviewable was updated despite the user not being approved because a u.id = r.target_id condition is missing. It only affected user reviewables that were pending when the migration ran. Users were not auto-approved.
This PR removes the user reminder topic timers, because that system has been supplanted and improved by bookmark reminders. The option is removed from the UI and all existing user reminder topic timers are migrated to bookmark reminders.
Migration does this:
* Get all topic_timers with status_type 5 (reminders)
* Gets all bookmarks where the user ID and topic ID match
* Loops through the found topic timers
* If there is no bookmark for the OP of the topic, then we just create a bookmark with a reminder
* If there is a bookmark for the OP of the topic and it does **not** have a reminder set, then just
update it with the topic timer reminder
* If there is a bookmark for the OP of the topic with a reminder then just discard the topic timer
* Cancels all outstanding user reminder topic timers
* **Trashes (not deletes) all user reminder topic timers**
Notes:
* For now I have left the user reminder topic timer job class in place; this is so the jobs can be cancelled in the migration. It and the specs will be deleted in the next PR.
* At a later date I will write a migration to delete all trashed user topic timers. They are not deleted here in case there are data issues and they need to be recovered.
* A future PR will change the UI of the topic timer modal to make it look more like the bookmark modal.
On the topic view route we query for reviewables of each post in the stream,
using a query that filters on two unindexed columns. This results in a Parallel Seq Scan
over all rows, which can take quite some time (~20ms was seen) on forums with lots of flags
After index is added PostgreSQL planner opts for a simple Index Scan and runs in sub 1ms.
Before:
```
QUERY PLAN
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Finalize GroupAggregate (cost=11401.08..11404.87 rows=20 width=28) (actual time=19.209..19.209 rows=1 loops=1)
Group Key: r.target_id
-> Gather Merge (cost=11401.08..11404.41 rows=26 width=28) (actual time=19.202..20.419 rows=1 loops=1)
Workers Planned: 2
Workers Launched: 2
-> Partial GroupAggregate (cost=10401.06..10401.38 rows=13 width=28) (actual time=16.958..16.958 rows=0 loops=3)
Group Key: r.target_id
-> Sort (cost=10401.06..10401.09 rows=13 width=16) (actual time=16.956..16.956 rows=0 loops=3)
Sort Key: r.target_id
Sort Method: quicksort Memory: 25kB
Worker 0: Sort Method: quicksort Memory: 25kB
Worker 1: Sort Method: quicksort Memory: 25kB
-> Nested Loop (cost=0.42..10400.82 rows=13 width=16) (actual time=15.894..16.938 rows=0 loops=3)
-> Parallel Seq Scan on reviewables r (cost=0.00..10302.47 rows=8 width=12) (actual time=15.882..16.927 rows=0 loops=3)
Filter: (((target_type)::text = 'Post'::text) AND (target_id = ANY ('{7565483,7565563,7565566,7565567,7565568,7565569,7565579,7565580,7565583,7565586,7565588,7565589,7565601,7565602,7565603,7565613,7565620,7565623,7565624,7565626}'::integer[])))
Rows Removed by Filter: 49183
-> Index Scan using index_reviewable_scores_on_reviewable_id on reviewable_scores s (cost=0.42..12.27 rows=2 width=8) (actual time=0.029..0.030 rows=1 loops=1)
Index Cond: (reviewable_id = r.id)
Planning Time: 0.318 ms
Execution Time: 20.470 ms
```
After:
```
QUERY PLAN
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
GroupAggregate (cost=0.84..342.54 rows=20 width=28) (actual time=0.038..0.038 rows=1 loops=1)
Group Key: r.target_id
-> Nested Loop (cost=0.84..341.95 rows=31 width=16) (actual time=0.020..0.033 rows=1 loops=1)
-> Index Scan using index_reviewables_on_target_id on reviewables r (cost=0.42..96.07 rows=20 width=12) (actual time=0.013..0.026 rows=1 loops=1)
Index Cond: (target_id = ANY ('{7565483,7565563,7565566,7565567,7565568,7565569,7565579,7565580,7565583,7565586,7565588,7565589,7565601,7565602,7565603,7565613,7565620,7565623,7565624,7565626}'::integer[]))
-> Index Scan using index_reviewable_scores_on_reviewable_id on reviewable_scores s (cost=0.42..12.27 rows=2 width=8) (actual time=0.005..0.005 rows=1 loops=1)
Index Cond: (reviewable_id = r.id)
Planning Time: 0.253 ms
Execution Time: 0.067 ms
```
The problem with this index is that on sites with a high non-pm to pm
posts ratio, the index is esstentially duplicating the existing index on
`PostSearchData#search_data`. If the site is huge, the index ends up
taking up more diskspace.
Very large batches can take an enormous amount of time due to churn
Limiting to 200k changes at a time gives us a far larger chance of finishing
the job without timing out or deadlocking.
Enabling the moderators_manage_categories_and_groups site setting will allow moderator users to create/manage groups.
* show New Group form to moderators
* Allow moderators to update groups and read logs, where appropriate
* Rename site setting from create -> manage
* improved tests
* Migration should rename old log entries
* Log group changes, even if those changes mean you can no longer see the group
* Slight reshuffle
* RouteTo /g if they no longer have permissions to view group
A giant transaction in a post migration can be very risky.
This splits the large amount of work this migration needs to do into 2 parts:
1. A re-runnable cleanup job prior to transaction
2. A minimally sized transaction to add the database constraint
This avoids large amounts of churn on the table
Convert all IMAP logging to write to a database table for easier inspection. These logs are cleaned up daily if they are > 5 days old.
Logs can easily be watched in dev by setting DISCOURSE_DEV_LOG_LEVEL=\"debug\" and running tail -f development.log | grep IMAP
When we run the S3 inventory, mark uploads that exist as verified true, those that don't as verified false, and uploads not included in the check / not yet checked as verified nil.
* FEATURE: set notification levels when added to a group
This feature allows admins and group owners to define default
category and tag tracking levels that will be applied to user
preferences automatically at the time when users are added to the
group. Users are free to change those preferences afterwards.
When removed from a group, the user's notification preferences aren't
changed.
Adds a imap_group_id column to IncomingEmail to deal with an issue where we were trying to update emails in the mailbox, calling IncomingEmail.where(imap_sync: true). However UID and UIDVALIDITY could be the same across accounts. So if group A used IMAP details for Gmail account A, and group B used IMAP details for Gmail account B, and both tried to sync changes to an email with UID of 3 (e.g. changing Labels), one account could affect the other. This even applied to Archiving!
Also in this PR:
* Fix error occurring if we do a uid_fetch and no emails are returned
* Allow for creating labels within the target mailbox (previously we would not do this, only use existing labels)
* Improve consistency for log messages
* Add specs for generic IMAP provider (Gmail specs still to come)
* Add custom archiving support for Gmail
* Only use Message-ID for uniqueness of IncomingEmail if it was generated by us
* Various refactors and improvements
For the following conditions, the TopicUser.bookmarked column was not updated correctly:
* When a bookmark was auto-deleted because the reminder was sent
* When a bookmark was auto-deleted because the owner of the bookmark replied to the topic
This adds another migration to fix the out-of-sync column and also some refactors to BookmarkManager to allow for more of these delete cases. BookmarkManager is used instead of directly destroying the bookmark in PostCreator and BookmarkReminderNotificationHandler.
Because previous migration was already deployed and some databases were already migrated, I needed to add some conditions to the migration.
Previous migration - https://github.com/discourse/discourse/blob/master/db/post_migrate/20200629232159_rename_path_whitelist_to_allowed_paths.rb
What will happen in a scenario when previous migration was not run.
1. column allowed_paths will be created
2. allowed_path will be populated with data from path_whitelist
3. path_whitelist column will be dropped
What will happen in a scenario when previous migration was already run.
1. column allowed_paths will not be created because already exists - `unless column_exists?(:embeddable_hosts, :allowed_paths)`
2. Data will not be copied because path_whitelist is missing - `if column_exists?(:embeddable_hosts, :path_whitelist) && column_exists?(:embeddable_hosts, :allowed_paths)`
3. path_whitelist column deletion will be skipped - `if column_exists?(:embeddable_hosts, :path_whitelist)`
This adds an option to "delete on owner reply" to bookmarks. If you select this option in the modal, then reply to the topic the bookmark is in, the bookmark will be deleted on reply.
This PR also changes the checkboxes for these additional bookmark options to an Integer column in the DB with a combobox to select the option you want.
The use cases are:
* Sometimes I will bookmark the topics to read it later. In this case we definitely don’t need to keep the bookmark after I replied to it.
* Sometimes I will read the topic in mobile and I will prefer to reply in PC later. Or I may have to do some research before reply. So I will bookmark it for reply later.
* FEATURE: Allow List for PMs
This feature adds a new user setting that is disabled by default that
allows them to specify a list of users that are allowed to send them
private messages. This way they don't have to maintain a large list of
users they don't want to here from and instead just list the people they
know they do want. Staff will still always be able to send messages to
the user.
* Update PR based on feedback
* Remove unneeded bookmark name index.
* Change bookmark search query to use post_search_data. This allows searching on topic title and post content
* Tweak the style/layout of the bookmark list so the search looks better and the whole page fits better on mobile.
* Added scopes UI
* Create scopes when creating a new API key
* Show scopes on the API key show route
* Apply scopes on API requests
* Extend scopes from plugins
* Add missing scopes. A mapping can be associated with multiple controller actions
* Only send scopes if the use global key option is disabled. Use the discourse plugin registry to add new scopes
* Add not null validations and index for api_key_id
* Annotate model
* DEV: Move default mappings to ApiKeyScope
* Remove unused attribute and improve UI for existing keys
* Support multiple parameters separated by a comma
Martin Brennan
Blake Erickson
Martin Brennan
Alan Guo Xiang Tan
Andrei Prigorshnev
Osama Sayegh
Penar Musaraj
David Taylor
Sam
Dan Ungureanu
Angus McLeod
Krzysztof Kotlarek
Loïc Guitaut
Bianca Nenciu
Arpit Jalan
Roman Rizzi
jbrw
Vinoth Kannan
Daniel Waterworth
Jarek Radosz
Jean
mintsaxon
Joffrey JAFFEUX
Mark VanLandingham
Gerhard Schlager
Josh Soref
Jeff Wong
Josh Soref
Régis Hanol
Gerhard Schlager
Arpit Jalan
Rafael dos Santos Silva
Vinoth Kannan
Neil Lalonde